Run black on IOS-Python

src/ifcopenshell-python/test/api/classification/test_remove_reference.py

@@ -36,9 +36,7 @@ class TestRemoveReference(test.bootstrap.IFC4):
             name="Foobar",
             classification=result,
         )
-        ifcopenshell.api.classification.remove_reference(
-            self.file, products=[element, element2], reference=reference
-        )
+        ifcopenshell.api.classification.remove_reference(self.file, products=[element, element2], reference=reference)
         assert len(ifcopenshell.util.classification.get_references(element)) == 0
         assert len(ifcopenshell.util.classification.get_references(element2)) == 0
         assert len(self.file.by_type("IfcClassificationReference")) == 0
@@ -90,9 +88,7 @@ class TestRemoveReference(test.bootstrap.IFC4):
             classification=result,
         )
         assert len(self.file.by_type("IfcClassificationReference")) == 1
-        ifcopenshell.api.classification.remove_reference(
-            self.file, products=[element, element2], reference=reference
-        )
+        ifcopenshell.api.classification.remove_reference(self.file, products=[element, element2], reference=reference)
         assert len(self.file.by_type("IfcClassificationReference")) == 1
         ifcopenshell.api.classification.remove_reference(self.file, products=[element3], reference=reference)
         assert len(self.file.by_type("IfcClassificationReference")) == 0

src/ifcopenshell-python/test/api/constraint/test_assign_constraint.py

@@ -27,9 +27,7 @@ class TestAssignConstraint(test.bootstrap.IFC4):
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         constraint = ifcopenshell.api.constraint.add_objective(self.file)
-        ifcopenshell.api.constraint.assign_constraint(
-            self.file, products=[element, element2], constraint=constraint
-        )
+        ifcopenshell.api.constraint.assign_constraint(self.file, products=[element, element2], constraint=constraint)
         assert ifcopenshell.util.constraint.get_constrained_elements(constraint) == {element, element2}
         assert len(self.file.by_type("IfcRelAssociatesConstraint")) == 1
 
@@ -37,13 +35,9 @@ class TestAssignConstraint(test.bootstrap.IFC4):
         constraint = ifcopenshell.api.constraint.add_objective(self.file)
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        ifcopenshell.api.constraint.assign_constraint(
-            self.file, products=[element, element2], constraint=constraint
-        )
+        ifcopenshell.api.constraint.assign_constraint(self.file, products=[element, element2], constraint=constraint)
         total_elements = len([e for e in self.file])
-        ifcopenshell.api.constraint.assign_constraint(
-            self.file, products=[element, element2], constraint=constraint
-        )
+        ifcopenshell.api.constraint.assign_constraint(self.file, products=[element, element2], constraint=constraint)
         assert len([e for e in self.file]) == total_elements
 
     def test_that_old_relationships_are_updated_if_they_still_contain_elements(self):
@@ -54,9 +48,7 @@ class TestAssignConstraint(test.bootstrap.IFC4):
 
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         element3 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        ifcopenshell.api.constraint.assign_constraint(
-            self.file, products=[element2, element3], constraint=constraint
-        )
+        ifcopenshell.api.constraint.assign_constraint(self.file, products=[element2, element3], constraint=constraint)
         assert len(rel.RelatedObjects) == 3
 
 

src/ifcopenshell-python/test/api/constraint/test_unassign_constraint.py

@@ -27,12 +27,8 @@ class TestUnassignConstraint(test.bootstrap.IFC4):
         constraint = ifcopenshell.api.constraint.add_objective(self.file)
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        ifcopenshell.api.constraint.assign_constraint(
-            self.file, products=[element, element2], constraint=constraint
-        )
-        ifcopenshell.api.constraint.unassign_constraint(
-            self.file, products=[element, element2], constraint=constraint
-        )
+        ifcopenshell.api.constraint.assign_constraint(self.file, products=[element, element2], constraint=constraint)
+        ifcopenshell.api.constraint.unassign_constraint(self.file, products=[element, element2], constraint=constraint)
         assert ifcopenshell.util.constraint.get_constrained_elements(element) == set()
         assert len(self.file.by_type("IfcRelAssociatesConstraint")) == 0
 
@@ -40,9 +36,7 @@ class TestUnassignConstraint(test.bootstrap.IFC4):
         constraint = ifcopenshell.api.constraint.add_objective(self.file)
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        ifcopenshell.api.constraint.unassign_constraint(
-            self.file, products=[element, element2], constraint=constraint
-        )
+        ifcopenshell.api.constraint.unassign_constraint(self.file, products=[element, element2], constraint=constraint)
         assert ifcopenshell.util.constraint.get_constrained_elements(element) == set()
         assert ifcopenshell.util.constraint.get_constrained_elements(element2) == set()
 
@@ -54,12 +48,8 @@ class TestUnassignConstraint(test.bootstrap.IFC4):
         ifcopenshell.api.constraint.assign_constraint(self.file, products=[element1], constraint=constraint)
         rel = self.file.by_type("IfcRelAssociatesConstraint")[0]
 
-        ifcopenshell.api.constraint.assign_constraint(
-            self.file, products=[element2, element3], constraint=constraint
-        )
-        ifcopenshell.api.constraint.unassign_constraint(
-            self.file, products=[element1, element2], constraint=constraint
-        )
+        ifcopenshell.api.constraint.assign_constraint(self.file, products=[element2, element3], constraint=constraint)
+        ifcopenshell.api.constraint.unassign_constraint(self.file, products=[element1, element2], constraint=constraint)
         assert rel.RelatedObjects == (element3,)
 
 

src/ifcopenshell-python/test/api/control/test_assign_control.py

@@ -27,24 +27,18 @@ class TestAssignControl(test.bootstrap.IFC4):
         control = ifcopenshell.api.cost.add_cost_schedule(self.file)
 
         # simple assignment
-        relation = ifcopenshell.api.control.assign_control(
-            self.file, relating_control=control, related_object=wall
-        )
+        relation = ifcopenshell.api.control.assign_control(self.file, relating_control=control, related_object=wall)
         assert len(self.file.by_type("IfcRelAssignsToControl")) == 1
         assert relation.RelatingControl == control
         assert relation.RelatedObjects == (wall,)
 
         # trying to establish existing relationship
-        relation = ifcopenshell.api.control.assign_control(
-            self.file, relating_control=control, related_object=wall
-        )
+        relation = ifcopenshell.api.control.assign_control(self.file, relating_control=control, related_object=wall)
         assert relation is None
 
         # assigning same control to another object
         wall1 = self.file.createIfcWall()
-        relation = ifcopenshell.api.control.assign_control(
-            self.file, relating_control=control, related_object=wall1
-        )
+        relation = ifcopenshell.api.control.assign_control(self.file, relating_control=control, related_object=wall1)
         assert relation is not None
         assert len(self.file.by_type("IfcRelAssignsToControl")) == 1
         assert relation.RelatingControl == control

src/ifcopenshell-python/test/api/control/test_unassign_control.py

@@ -27,17 +27,13 @@ class TestUnassignControl(test.bootstrap.IFC4):
         control = ifcopenshell.api.cost.add_cost_schedule(self.file)
 
         # assign and unassign
-        relation = ifcopenshell.api.control.assign_control(
-            self.file, relating_control=control, related_object=wall
-        )
+        relation = ifcopenshell.api.control.assign_control(self.file, relating_control=control, related_object=wall)
         ifcopenshell.api.control.unassign_control(self.file, relating_control=control, related_object=wall)
         assert len(self.file.by_type("IfcRelAssignsToControl")) == 0
 
         # 1 control 2 related objects
         wall1 = self.file.createIfcWall()
-        relation = ifcopenshell.api.control.assign_control(
-            self.file, relating_control=control, related_object=wall
-        )
+        relation = ifcopenshell.api.control.assign_control(self.file, relating_control=control, related_object=wall)
         ifcopenshell.api.control.assign_control(self.file, relating_control=control, related_object=wall1)
         ifcopenshell.api.control.unassign_control(self.file, relating_control=control, related_object=wall1)
         assert len(self.file.by_type("IfcRelAssignsToControl")) == 1

src/ifcopenshell-python/test/api/cost/test_add_cost_item_quantity.py

@@ -33,9 +33,7 @@ class TestAddCostItemQuantity(test.bootstrap.IFC4):
 
         quantities = []
         for quantity_type in quantity_types:
-            quantity = ifcopenshell.api.cost.add_cost_item_quantity(
-                self.file, cost_item=item, ifc_class=quantity_type
-            )
+            quantity = ifcopenshell.api.cost.add_cost_item_quantity(self.file, cost_item=item, ifc_class=quantity_type)
             assert quantity.is_a(quantity_type)
             assert quantity.Name == "Unnamed"
             if quantity_type == "IfcQuantityCount":

src/ifcopenshell-python/test/api/document/test_unassign_document.py

@@ -36,9 +36,7 @@ class TestUnassignDocument(test.bootstrap.IFC4):
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         element3 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         reference = ifcopenshell.api.document.add_reference(self.file, information=None)
-        ifcopenshell.api.document.assign_document(
-            self.file, products=[element, element2, element3], document=reference
-        )
+        ifcopenshell.api.document.assign_document(self.file, products=[element, element2, element3], document=reference)
         ifcopenshell.api.document.unassign_document(self.file, products=[element, element2], document=reference)
         assert ifcopenshell.util.element.get_referenced_elements(reference) == {element3}
 

src/ifcopenshell-python/test/api/geometry/test_unassign_representation.py

@@ -30,9 +30,7 @@ class TestUnassignRepresentation(test.bootstrap.IFC4):
         )
         ifcopenshell.api.geometry.unassign_representation(self.file, product=wall, representation=representation)
         assert representation not in wall.Representation.Representations
-        ifcopenshell.api.geometry.unassign_representation(
-            self.file, product=wall, representation=representation2
-        )
+        ifcopenshell.api.geometry.unassign_representation(self.file, product=wall, representation=representation2)
         assert not wall.Representation
         assert len(self.file.by_type("IfcShapeRepresentation")) == 2
         assert len(self.file.by_type("IfcProductDefinitionShape")) == 0
@@ -42,9 +40,7 @@ class TestUnassignRepresentation(test.bootstrap.IFC4):
         origin = self.file.createIfcAxis2Placement3D()
         repmap = self.file.createIfcRepresentationMap(MappedRepresentation=representation, MappingOrigin=origin)
         walltype = self.file.createIfcWallType(RepresentationMaps=[repmap])
-        ifcopenshell.api.geometry.unassign_representation(
-            self.file, product=walltype, representation=representation
-        )
+        ifcopenshell.api.geometry.unassign_representation(self.file, product=walltype, representation=representation)
         assert not walltype.RepresentationMaps
         assert len(self.file.by_type("IfcAxis2Placement3D")) == 0
         assert len(self.file.by_type("IfcRepresentationMap")) == 0
@@ -59,9 +55,7 @@ class TestUnassignRepresentation(test.bootstrap.IFC4):
         rep = self.file.createIfcShapeRepresentation(Items=[mapped_item])
         prodrep = self.file.createIfcProductDefinitionShape(Representations=[rep])
         wall = self.file.createIfcWall(Representation=prodrep)
-        ifcopenshell.api.geometry.unassign_representation(
-            self.file, product=walltype, representation=representation
-        )
+        ifcopenshell.api.geometry.unassign_representation(self.file, product=walltype, representation=representation)
         assert not walltype.RepresentationMaps
         assert len(self.file.by_type("IfcAxis2Placement3D")) == 0
         assert len(self.file.by_type("IfcRepresentationMap")) == 0

src/ifcopenshell-python/test/api/library/test_unassign_reference.py

@@ -33,5 +33,6 @@ class TestUnassignReference(test.bootstrap.IFC4):
         assert ifcopenshell.util.element.get_referenced_elements(reference) == set()
         assert len(self.file.by_type("IfcRelAssociatesLibrary")) == 0
 
+
 class TestUnassignReferenceIFC2X3(test.bootstrap.IFC2X3, TestUnassignReference):
     pass

src/ifcopenshell-python/test/api/material/test_remove_material.py

@@ -111,9 +111,7 @@ class TestRemoveMaterialIFC4(test.bootstrap.IFC4, TestRemoveMaterialIFC2X3):
     def test_removing_material_in_constituent(self):
         wall = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         material = ifcopenshell.api.material.add_material(self.file)
-        material_set = ifcopenshell.api.material.add_material_set(
-            self.file, set_type="IfcMaterialConstituentSet"
-        )
+        material_set = ifcopenshell.api.material.add_material_set(self.file, set_type="IfcMaterialConstituentSet")
         ifcopenshell.api.material.add_constituent(self.file, constituent_set=material_set, material=material)
         ifcopenshell.api.material.assign_material(self.file, products=[wall], material=material_set)
         assert len(self.file.by_type("IfcMaterialConstituentSet")[0].MaterialConstituents) == 1

src/ifcopenshell-python/test/api/nest/test_assign_object.py

@@ -79,9 +79,7 @@ class TestAssignObject(test.bootstrap.IFC4):
 
         # maintain the order in the affected relationships too
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcTask")
-        ifcopenshell.api.nest.assign_object(
-            self.file, related_objects=subelements[2:3], relating_object=element2
-        )
+        ifcopenshell.api.nest.assign_object(self.file, related_objects=subelements[2:3], relating_object=element2)
         assert rel.RelatedObjects == tuple(subelements[:2] + subelements[3:])
 
 

src/ifcopenshell-python/test/api/owner/test_add_person_and_organisation.py

@@ -24,9 +24,7 @@ class TestAddPersonAndOrganisation(test.bootstrap.IFC4):
     def test_adding(self):
         person = self.file.createIfcPerson()
         organisation = self.file.createIfcOrganization()
-        ifcopenshell.api.owner.add_person_and_organisation(
-            self.file, person=person, organisation=organisation
-        )
+        ifcopenshell.api.owner.add_person_and_organisation(self.file, person=person, organisation=organisation)
 
 
 class TestAddPersonAndOrganisationIFC2X3(test.bootstrap.IFC2X3, TestAddPersonAndOrganisation):

src/ifcopenshell-python/test/api/project/test_assign_declaration.py

@@ -57,9 +57,7 @@ class TestAssignDeclaration(test.bootstrap.IFC4):
     def test_that_old_relationships_are_updated_if_they_still_contain_elements(self):
         element_type = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWallType")
         library = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcProjectLibrary")
-        ifcopenshell.api.project.assign_declaration(
-            self.file, definitions=[element_type], relating_context=library
-        )
+        ifcopenshell.api.project.assign_declaration(self.file, definitions=[element_type], relating_context=library)
         rel = self.file.by_type("IfcRelDeclares")[0]
 
         element_type2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWallType")

src/ifcopenshell-python/test/api/project/test_unassign_declaration.py

@@ -61,9 +61,7 @@ class TestUnassignDeclaration(test.bootstrap.IFC4):
         element_type1 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWallType")
         element_type2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWallType")
         element_type3 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWallType")
-        ifcopenshell.api.project.assign_declaration(
-            self.file, definitions=[element_type1], relating_context=library
-        )
+        ifcopenshell.api.project.assign_declaration(self.file, definitions=[element_type1], relating_context=library)
         rel = self.file.by_type("IfcRelDeclares")[0]
 
         ifcopenshell.api.project.assign_declaration(

src/ifcopenshell-python/test/api/pset/test_edit_pset.py

@@ -183,9 +183,7 @@ class TestEditPset(test.bootstrap.IFC4):
         assert pset.HasProperties[0].NominalValue.wrappedValue == 34
 
     def test_editing_list_valued_properties(self):
-        cable = ifcopenshell.api.root.create_entity(
-            self.file, ifc_class="IfcDistributionPort", predefined_type="CABLE"
-        )
+        cable = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcDistributionPort", predefined_type="CABLE")
         pset = ifcopenshell.api.pset.add_pset(self.file, product=cable, name="Pset_DistributionPortTypeCable")
         ifcopenshell.api.pset.edit_pset(
             self.file,

src/ifcopenshell-python/test/api/pset_template/test_edit_prop_template.py

@@ -29,9 +29,7 @@ class TestEditPropTemplate(test.bootstrap.IFC4):
             prop_template=prop,
             attributes={"Name": "DemoA", "PrimaryMeasureType": "IfcLabel"},
         )
-        ifcopenshell.api.pset_template.edit_prop_template(
-            self.file, prop_template=prop, attributes={"Name": "DemoB"}
-        )
+        ifcopenshell.api.pset_template.edit_prop_template(self.file, prop_template=prop, attributes={"Name": "DemoB"})
         assert prop.Name == "DemoB"
 
     def test_editing_an_enumeration(self):

src/ifcopenshell-python/test/api/root/test_reassign_class.py

@@ -62,9 +62,7 @@ class TestReassignClass(test.bootstrap.IFC4):
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         ifcopenshell.api.type.assign_type(self.file, related_objects=[element2], relating_type=element_type)
 
-        element_type = ifcopenshell.api.root.reassign_class(
-            self.file, product=element_type, ifc_class="IfcSlabType"
-        )
+        element_type = ifcopenshell.api.root.reassign_class(self.file, product=element_type, ifc_class="IfcSlabType")
 
         # type occurrences have reassigned classes
         occurrences = ifcopenshell.util.element.get_types(element_type)

src/ifcopenshell-python/test/api/spatial/test_assign_container.py

@@ -93,12 +93,8 @@ class TestAssignContainer(test.bootstrap.IFC4):
                 (0.0, 0.0, 0.0, 1.0),
             )
         )
-        ifcopenshell.api.geometry.edit_object_placement(
-            self.file, product=element1, matrix=matrix1.copy(), is_si=False
-        )
-        ifcopenshell.api.geometry.edit_object_placement(
-            self.file, product=element2, matrix=matrix2.copy(), is_si=False
-        )
+        ifcopenshell.api.geometry.edit_object_placement(self.file, product=element1, matrix=matrix1.copy(), is_si=False)
+        ifcopenshell.api.geometry.edit_object_placement(self.file, product=element2, matrix=matrix2.copy(), is_si=False)
         ifcopenshell.api.geometry.edit_object_placement(
             self.file, product=subelement, matrix=matrix1.copy(), is_si=False
         )

src/ifcopenshell-python/test/api/spatial/test_dereference_structure.py

@@ -51,9 +51,7 @@ class TestDereferenceStructure(test.bootstrap.IFC4):
         subelement1 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         subelement2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         subelement3 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        ifcopenshell.api.spatial.reference_structure(
-            self.file, products=[subelement1], relating_structure=element
-        )
+        ifcopenshell.api.spatial.reference_structure(self.file, products=[subelement1], relating_structure=element)
         ifcopenshell.api.spatial.reference_structure(
             self.file, products=[subelement2, subelement3], relating_structure=element
         )

src/ifcopenshell-python/test/api/style/test_assign_material_style.py

@@ -82,9 +82,7 @@ class TestAssignMaterialStyleIFC4(test.bootstrap.IFC4, TestAssignMaterialStyleIF
 
         style = self.file.createIfcSurfaceStyle()
         material = ifcopenshell.api.material.add_material(self.file)
-        material_set = ifcopenshell.api.material.add_material_set(
-            self.file, set_type="IfcMaterialConstituentSet"
-        )
+        material_set = ifcopenshell.api.material.add_material_set(self.file, set_type="IfcMaterialConstituentSet")
         constituent = ifcopenshell.api.material.add_constituent(
             self.file, constituent_set=material_set, material=material
         )

src/ifcopenshell-python/test/api/system/test_assign_port.py

@@ -61,9 +61,7 @@ class TestAssignPort(test.bootstrap.IFC4):
                 (0.0, 0.0, 0.0, 1.0),
             )
         )
-        ifcopenshell.api.geometry.edit_object_placement(
-            self.file, product=element, matrix=matrix.copy(), is_si=False
-        )
+        ifcopenshell.api.geometry.edit_object_placement(self.file, product=element, matrix=matrix.copy(), is_si=False)
         ifcopenshell.api.geometry.edit_object_placement(
             self.file, product=subelement, matrix=submatrix.copy(), is_si=False
         )

src/ifcopenshell-python/test/api/type/test_assign_type.py

@@ -51,9 +51,7 @@ class TestAssignType(test.bootstrap.IFC4):
         element_type2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWallType")
         element1 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        ifcopenshell.api.type.assign_type(
-            self.file, related_objects=[element1, element2], relating_type=element_type1
-        )
+        ifcopenshell.api.type.assign_type(self.file, related_objects=[element1, element2], relating_type=element_type1)
         rel = element1.IsDefinedBy[0] if self.file.schema == "IFC2X3" else element1.IsTypedBy[0]
         assert len(rel.RelatedObjects) == 2
         ifcopenshell.api.type.assign_type(self.file, related_objects=[element1], relating_type=element_type2)
@@ -110,9 +108,7 @@ class TestAssignType(test.bootstrap.IFC4):
         mapped_rep_id = mapped_rep.id()
 
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        ifcopenshell.api.type.assign_type(
-            self.file, related_objects=[element1, element2], relating_type=element_type
-        )
+        ifcopenshell.api.type.assign_type(self.file, related_objects=[element1, element2], relating_type=element_type)
         assert (mapped_rep := ifcopenshell.util.representation.get_representation(element1, context=context))
         assert mapped_rep.id() == mapped_rep_id
 
@@ -139,9 +135,7 @@ class TestAssignType(test.bootstrap.IFC4):
 
         # use 2 elements to trigger material assignment code block
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        ifcopenshell.api.type.assign_type(
-            self.file, related_objects=[element1, element2], relating_type=element_type
-        )
+        ifcopenshell.api.type.assign_type(self.file, related_objects=[element1, element2], relating_type=element_type)
         assert (material := ifcopenshell.util.element.get_material(element1))
         assert material.id() == material_id
 

src/ifcopenshell-python/test/api/type/test_unassign_type.py

@@ -29,9 +29,7 @@ class TestUnassignType(test.bootstrap.IFC4):
         element_type = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWallType")
         element1 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         element2 = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        ifcopenshell.api.type.assign_type(
-            self.file, related_objects=[element1, element2], relating_type=element_type
-        )
+        ifcopenshell.api.type.assign_type(self.file, related_objects=[element1, element2], relating_type=element_type)
         ifcopenshell.api.type.unassign_type(self.file, related_objects=[element1, element2])
         assert ifcopenshell.util.element.get_type(element1) is None
         assert ifcopenshell.util.element.get_type(element2) is None

src/ifcopenshell-python/test/api/void/test_add_opening.py

@@ -61,12 +61,8 @@ class TestAddOpening(test.bootstrap.IFC4):
                 (0.0, 0.0, 0.0, 1.0),
             )
         )
-        ifcopenshell.api.geometry.edit_object_placement(
-            self.file, product=wall, matrix=matrix1.copy(), is_si=False
-        )
-        ifcopenshell.api.geometry.edit_object_placement(
-            self.file, product=opening, matrix=matrix1.copy(), is_si=False
-        )
+        ifcopenshell.api.geometry.edit_object_placement(self.file, product=wall, matrix=matrix1.copy(), is_si=False)
+        ifcopenshell.api.geometry.edit_object_placement(self.file, product=opening, matrix=matrix1.copy(), is_si=False)
         ifcopenshell.api.void.add_opening(self.file, opening=opening, element=wall)
         assert opening.ObjectPlacement.PlacementRelTo.PlacesObject[0] == wall
         assert numpy.array_equal(ifcopenshell.util.placement.get_local_placement(opening.ObjectPlacement), matrix1)

src/ifcopenshell-python/test/fixtures/rules/generate_00.py

@@ -1,18 +1,28 @@
 import time
 import ifcopenshell
+
 for i in range(3):
-  f = ifcopenshell.file(schema="IFC2X3")
-  p = f.createIfcPerson(Id="tfk", GivenName="Thomas")
-  o = f.createIfcOrganization(Name="AECgeeks")
-  pando = f.createIfcPersonAndOrganization(p, o)
-  appl = f.createIfcApplication(o, ifcopenshell.version, "IfcOpenShell", f"IfcOpenShell {ifcopenshell.version}")
-  units = f.createIfcUnitAssignment(Units=[f.createIfcSIUnit(None, "LENGTHUNIT", None, "METRE")])
-  ownerhist = f.createIfcOwnerHistory(pando, appl, ChangeAction="ADDED", CreationDate=int(time.time()))
-  for j in range(i):
-    f.createIfcProject(ifcopenshell.guid.new(), ownerhist, 'My Project', UnitsInContext=units, RepresentationContexts=[
-      f.createIfcGeometricRepresentationContext(
-            None, None, 3, None,
-            f.create_entity(f'IfcAxis2Placement3D', f.createIfcCartesianPoint((0., 0., 0.))),
-      )
-    ])
-  f.write(f"{'fail' if i == 2 else 'pass'}-{i}-projects-ifc2x3.ifc")
+    f = ifcopenshell.file(schema="IFC2X3")
+    p = f.createIfcPerson(Id="tfk", GivenName="Thomas")
+    o = f.createIfcOrganization(Name="AECgeeks")
+    pando = f.createIfcPersonAndOrganization(p, o)
+    appl = f.createIfcApplication(o, ifcopenshell.version, "IfcOpenShell", f"IfcOpenShell {ifcopenshell.version}")
+    units = f.createIfcUnitAssignment(Units=[f.createIfcSIUnit(None, "LENGTHUNIT", None, "METRE")])
+    ownerhist = f.createIfcOwnerHistory(pando, appl, ChangeAction="ADDED", CreationDate=int(time.time()))
+    for j in range(i):
+        f.createIfcProject(
+            ifcopenshell.guid.new(),
+            ownerhist,
+            "My Project",
+            UnitsInContext=units,
+            RepresentationContexts=[
+                f.createIfcGeometricRepresentationContext(
+                    None,
+                    None,
+                    3,
+                    None,
+                    f.create_entity(f"IfcAxis2Placement3D", f.createIfcCartesianPoint((0.0, 0.0, 0.0))),
+                )
+            ],
+        )
+    f.write(f"{'fail' if i == 2 else 'pass'}-{i}-projects-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_01.py

@@ -1,13 +1,14 @@
 import ifcopenshell
-for i, box_alignment in enumerate(['top-left', 'center', 'invalid', 'CENTER']):
+
+for i, box_alignment in enumerate(["top-left", "center", "invalid", "CENTER"]):
     f = ifcopenshell.file(schema="IFC2X3")
 
     f.createIfcTextLiteralWithExtent(
         "My presentable text",
-        f.createIfcAxis2Placement2D(f.createIfcCartesianPoint((0., 0.))),
-        'RIGHT',
-        f.createIfcPlanarExtent(10., 10.),
-        box_alignment
+        f.createIfcAxis2Placement2D(f.createIfcCartesianPoint((0.0, 0.0))),
+        "RIGHT",
+        f.createIfcPlanarExtent(10.0, 10.0),
+        box_alignment,
     )
 
     f.write(f"{'pass' if i in (0,1) else 'fail'}-{i}-box-alignment-{box_alignment}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_02.py

@@ -28,11 +28,20 @@ for i, (is_valid, lat) in enumerate(latitudes):
     ownerhist = f.createIfcOwnerHistory(pando, appl, ChangeAction="ADDED", CreationDate=int(time.time()))
     units = f.createIfcUnitAssignment(Units=[f.createIfcSIUnit(None, "LENGTHUNIT", None, "METRE")])
     site = f.createIfcSite(ifcopenshell.guid.new(), ownerhist, RefLatitude=lat)
-    proj = f.createIfcProject(ifcopenshell.guid.new(), ownerhist, 'My Project', UnitsInContext=units, RepresentationContexts=[
-      f.createIfcGeometricRepresentationContext(
-            None, None, 3, None,
-            f.create_entity(f'IfcAxis2Placement3D', f.createIfcCartesianPoint((0., 0., 0.))),
-      )
-    ])
+    proj = f.createIfcProject(
+        ifcopenshell.guid.new(),
+        ownerhist,
+        "My Project",
+        UnitsInContext=units,
+        RepresentationContexts=[
+            f.createIfcGeometricRepresentationContext(
+                None,
+                None,
+                3,
+                None,
+                f.create_entity(f"IfcAxis2Placement3D", f.createIfcCartesianPoint((0.0, 0.0, 0.0))),
+            )
+        ],
+    )
     f.createIfcRelAggregates(ifcopenshell.guid.new(), ownerhist, None, None, proj, [site])
     f.write(f"{'pass' if is_valid else 'fail'}-site-latitude-{i}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_03.py

@@ -1,18 +1,13 @@
 import ifcopenshell
 
-for depth in (-1., 0., 1.):
+for depth in (-1.0, 0.0, 1.0):
     f = ifcopenshell.file(schema="IFC2X3")
     f.createIfcExtrudedAreaSolid(
         f.createIfcRectangleProfileDef(
-            "AREA", None,
-            f.createIfcAxis2Placement2D(
-                f.createIfcCartesianPoint((0., 0.))
-            ), 1., 1.
+            "AREA", None, f.createIfcAxis2Placement2D(f.createIfcCartesianPoint((0.0, 0.0))), 1.0, 1.0
         ),
-        f.createIfcAxis2Placement3D(
-            f.createIfcCartesianPoint((0., 0., 0.))
-        ),
-        f.createIfcDirection((0., 0., 1.)),
-        depth
+        f.createIfcAxis2Placement3D(f.createIfcCartesianPoint((0.0, 0.0, 0.0))),
+        f.createIfcDirection((0.0, 0.0, 1.0)),
+        depth,
     )
     f.write(f"{'pass' if depth > 0. else 'fail'}-extrusion-depth-{depth}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_04.py

@@ -1,6 +1,8 @@
 import ifcopenshell
 
-for i, (r1, r2) in enumerate([("SUPPLIER", None), ("SUPPLIER", "Valid"), ("USERDEFINED", "Valid"), ("USERDEFINED", None)]):
+for i, (r1, r2) in enumerate(
+    [("SUPPLIER", None), ("SUPPLIER", "Valid"), ("USERDEFINED", "Valid"), ("USERDEFINED", None)]
+):
     f = ifcopenshell.file(schema="IFC2X3")
     f.createIfcActorRole(r1, r2)
-    f.write(f"{'fail' if i == 3 else 'pass'}-actor-role-{r1}-{r2}-ifc2x3.ifc")
+    f.write(f"{'fail' if i == 3 else 'pass'}-actor-role-{r1}-{r2}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_05.py

@@ -1,18 +1,22 @@
 import ifcopenshell
 
 options = {
-    'IfcPostalAddress': ({}, {'Country': 'The Netherlands'}, {'Country': 'The Netherlands', 'Town': 'Eindhoven'}),
-    'IfcTelecomAddress': ({}, {'TelephoneNumbers': ['040-12345678']}, {'TelephoneNumbers': ['040-12345678'], 'PagerNumber': '12345'})
+    "IfcPostalAddress": ({}, {"Country": "The Netherlands"}, {"Country": "The Netherlands", "Town": "Eindhoven"}),
+    "IfcTelecomAddress": (
+        {},
+        {"TelephoneNumbers": ["040-12345678"]},
+        {"TelephoneNumbers": ["040-12345678"], "PagerNumber": "12345"},
+    ),
 }
 
-for ent in ('IfcPostalAddress', 'IfcTelecomAddress'):
-    for purpose in (None, 'USERDEFINED', 'HOME'):
-        for ud in (None, 'SomethingUserdefined'):
+for ent in ("IfcPostalAddress", "IfcTelecomAddress"):
+    for purpose in (None, "USERDEFINED", "HOME"):
+        for ud in (None, "SomethingUserdefined"):
 
             f = ifcopenshell.file(schema="IFC2X3")
             f.create_entity(ent, purpose, None, ud, **options[ent][1])
 
-            valid = not (purpose == 'USERDEFINED' and ud is None)
+            valid = not (purpose == "USERDEFINED" and ud is None)
 
             f.write(f"{'pass' if valid else 'fail'}-{ent}-{purpose}-{ud}-ifc2x3.ifc")
 
@@ -21,5 +25,5 @@ for ent in ('IfcPostalAddress', 'IfcTelecomAddress'):
         f.create_entity(ent, **kwargs)
         valid = len(kwargs) >= 1
         if not valid:
-            kwargs = {'all-unset': 1}
+            kwargs = {"all-unset": 1}
         f.write(f"{'pass' if valid else 'fail'}-{ent}-{'-'.join(kwargs.keys())}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_06.py

@@ -2,13 +2,13 @@ import itertools
 import time
 import ifcopenshell
 
-for pty, ety in itertools.product(('GRILLE', 'USERDEFINED'), (None, 'Something')):
+for pty, ety in itertools.product(("GRILLE", "USERDEFINED"), (None, "Something")):
     f = ifcopenshell.file(schema="IFC2X3")
     p = f.createIfcPerson(Id="tfk", GivenName="Thomas")
     o = f.createIfcOrganization(Name="AECgeeks")
     pando = f.createIfcPersonAndOrganization(p, o)
     appl = f.createIfcApplication(o, ifcopenshell.version, "IfcOpenShell", f"IfcOpenShell {ifcopenshell.version}")
     ownerhist = f.createIfcOwnerHistory(pando, appl, ChangeAction="ADDED", CreationDate=int(time.time()))
-    f.createIfcAirTerminalType(ifcopenshell.guid.new(), ownerhist, 'My Type', ElementType=ety, PredefinedType=pty)
-    valid = pty != 'USERDEFINED' or ety is not None
+    f.createIfcAirTerminalType(ifcopenshell.guid.new(), ownerhist, "My Type", ElementType=ety, PredefinedType=pty)
+    valid = pty != "USERDEFINED" or ety is not None
     f.write(f"{'pass' if valid else 'fail'}-air-terminal-type-{pty}-{ety}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_07.py

@@ -1,10 +1,16 @@
 import ifcopenshell
 
 create_none = lambda f: None
-create_polyline = lambda f: f.createIfcPolyline((f.createIfcCartesianPoint((0., 0.)), f.createIfcCartesianPoint((1., 0.))))
-create_point = lambda f: f.createIfcCartesianPoint((0., 0.))
+create_polyline = lambda f: f.createIfcPolyline(
+    (f.createIfcCartesianPoint((0.0, 0.0)), f.createIfcCartesianPoint((1.0, 0.0)))
+)
+create_point = lambda f: f.createIfcCartesianPoint((0.0, 0.0))
 
 for i, make_item in enumerate((create_none, create_polyline, create_point)):
     f = ifcopenshell.file(schema="IFC2X3")
-    inst = f.createIfcAnnotationCurveOccurrence(make_item(f), [f.createIfcPresentationStyleAssignment([f.createIfcCurveStyle()])])
-    f.write(f"{'fail' if i == 2 else 'pass'}-annotation-curve-occurence-{'None' if inst.Item is None else inst.Item.is_a()}-ifc2x3.ifc")
+    inst = f.createIfcAnnotationCurveOccurrence(
+        make_item(f), [f.createIfcPresentationStyleAssignment([f.createIfcCurveStyle()])]
+    )
+    f.write(
+        f"{'fail' if i == 2 else 'pass'}-annotation-curve-occurence-{'None' if inst.Item is None else inst.Item.is_a()}-ifc2x3.ifc"
+    )

src/ifcopenshell-python/test/fixtures/rules/generate_08.py

@@ -1,7 +1,9 @@
 import ifcopenshell
 
-create_plane = lambda f: f.createIfcPlane(f.createIfcAxis2Placement3D(f.createIfcCartesianPoint((0., 0., 0.))))
-create_polyline = lambda f: f.createIfcPolyline((f.createIfcCartesianPoint((0., 0.)), f.createIfcCartesianPoint((1., 0.))))
+create_plane = lambda f: f.createIfcPlane(f.createIfcAxis2Placement3D(f.createIfcCartesianPoint((0.0, 0.0, 0.0))))
+create_polyline = lambda f: f.createIfcPolyline(
+    (f.createIfcCartesianPoint((0.0, 0.0)), f.createIfcCartesianPoint((1.0, 0.0)))
+)
 
 for i, make_item in enumerate((create_plane, create_polyline)):
     f = ifcopenshell.file(schema="IFC2X3")

src/ifcopenshell-python/test/fixtures/rules/generate_09.py

@@ -1,22 +1,16 @@
 import ifcopenshell
 
-pts = [(0., 0.), (1., 0.), (1., 1.)]
-dims = [
-    (2,3,3),
-    (3,3,2),
-    (2,2,2),
-    (3,3,3)
-]
+pts = [(0.0, 0.0), (1.0, 0.0), (1.0, 1.0)]
+dims = [(2, 3, 3), (3, 3, 2), (2, 2, 2), (3, 3, 3)]
+
 
 def make_point(xy, dim):
-    return f.createIfcCartesianPoint((xy + (0.,))[0:dim])
+    return f.createIfcCartesianPoint((xy + (0.0,))[0:dim])
+
 
 for d in dims:
     f = ifcopenshell.file(schema="IFC2X3")
-    inst = f.createIfcBSplineCurve(1, 
-        list(map(lambda t: make_point(*t), zip(pts, d))),
-        "POLYLINE_FORM",
-        False,
-        False
+    inst = f.createIfcBSplineCurve(1, list(map(lambda t: make_point(*t), zip(pts, d))), "POLYLINE_FORM", False, False)
+    f.write(
+        f"{'pass' if len(set(d)) == 1 else 'fail'}-bspline-curve-point-dimensions-{'-'.join(map(str, d))}-ifc2x3.ifc"
     )
-    f.write(f"{'pass' if len(set(d)) == 1 else 'fail'}-bspline-curve-point-dimensions-{'-'.join(map(str, d))}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_10.py

@@ -1,8 +1,8 @@
 import itertools
 import ifcopenshell
 
-defaults = {'Girth': 1., 'WallThickness': 0.11}
-depths = [2., 3.]
+defaults = {"Girth": 1.0, "WallThickness": 0.11}
+depths = [2.0, 3.0]
 widths = [0.2, 0.3]
 
 for d, w in itertools.product(depths, widths):
@@ -12,9 +12,9 @@ for d, w in itertools.product(depths, widths):
 
     f = ifcopenshell.file(schema="IFC2X3")
 
-    valid = (Girth < (Depth / 2.)) and ((WallThickness < Width/2.) and (WallThickness < Depth/2.))
+    valid = (Girth < (Depth / 2.0)) and ((WallThickness < Width / 2.0) and (WallThickness < Depth / 2.0))
 
     inst = f.createIfcCShapeProfileDef(
-        'AREA', None, f.createIfcAxis2Placement2D(f.createIfcCartesianPoint((0., 0.))), **D
+        "AREA", None, f.createIfcAxis2Placement2D(f.createIfcCartesianPoint((0.0, 0.0))), **D
     )
     f.write(f"{'pass' if valid else 'fail'}-cshape-profile-width-{w}-depth-{d}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_11.py

@@ -1,34 +1,29 @@
 import ifcopenshell
 
 depth = 1.0
-for (dir_x, dir_z) in ((0., -1.), (0., 0.), (1., 0.), (1., 0.001), (0., 1.)):
+for dir_x, dir_z in ((0.0, -1.0), (0.0, 0.0), (1.0, 0.0), (1.0, 0.001), (0.0, 1.0)):
 
-    schemas = ['IFC2X3']
-    if (dir_x, dir_z) == (0., 0.):
-        schemas.append('IFC4')
+    schemas = ["IFC2X3"]
+    if (dir_x, dir_z) == (0.0, 0.0):
+        schemas.append("IFC4")
 
     for schema in schemas:
         f = ifcopenshell.file(schema=schema)
         f.createIfcExtrudedAreaSolid(
             f.createIfcRectangleProfileDef(
-                "AREA", None,
-                f.createIfcAxis2Placement2D(
-                    f.createIfcCartesianPoint((0., 0.))
-                ), 1., 1.
+                "AREA", None, f.createIfcAxis2Placement2D(f.createIfcCartesianPoint((0.0, 0.0))), 1.0, 1.0
             ),
-            f.createIfcAxis2Placement3D(
-                f.createIfcCartesianPoint((0., 0., 0.))
-            ),
-            f.createIfcDirection((dir_x, 0., dir_z)),
-            depth
+            f.createIfcAxis2Placement3D(f.createIfcCartesianPoint((0.0, 0.0, 0.0))),
+            f.createIfcDirection((dir_x, 0.0, dir_z)),
+            depth,
         )
 
         # Due to the way IfcDotProduct and IfcNormalise interact, (0 0 0) actually
         # results into indeterminate. But in IFC4 onwars there is a rule in IfcDirection
         # for non-zero magnitude
 
-        valid = dir_z != 0.
-        if f.schema == 'IFC2X3' and (dir_x, dir_z) == (0., 0.):
+        valid = dir_z != 0.0
+        if f.schema == "IFC2X3" and (dir_x, dir_z) == (0.0, 0.0):
             valid = True
 
         f.write(f"{'pass' if valid else 'fail'}-extrusion-dir-{dir_x}-{dir_z}-{f.schema.lower()}.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_12.py

@@ -1,9 +1,9 @@
 import ifcopenshell
 
-coords = [(0., 0.), (10., 0.), (10., 10.), (0., 10.)]
-make_3d = lambda cs: [c + (0.,) for c in cs]
-inner_1 = [(1., 1.), (2., 1.), (2., 2.), (1., 2.)]
-inner_2 = [(3., 3.), (4., 3.), (4., 4.), (3., 4.)]
+coords = [(0.0, 0.0), (10.0, 0.0), (10.0, 10.0), (0.0, 10.0)]
+make_3d = lambda cs: [c + (0.0,) for c in cs]
+inner_1 = [(1.0, 1.0), (2.0, 1.0), (2.0, 2.0), (1.0, 2.0)]
+inner_2 = [(3.0, 3.0), (4.0, 3.0), (4.0, 4.0), (3.0, 4.0)]
 
 old_map = map
 map = lambda fn, *args: list(old_map(fn, *args))
@@ -16,7 +16,7 @@ f.createIfcArbitraryProfileDefWithVoids(
     [
         f.createIfcPolyline(map(f.createIfcCartesianPoint, inner_1)),
         f.createIfcPolyline(map(f.createIfcCartesianPoint, inner_2)),
-    ]
+    ],
 )
 f.write(f"pass-arbitrary-profile-with-voids-ifc2x3.ifc")
 
@@ -28,7 +28,7 @@ f.createIfcArbitraryProfileDefWithVoids(
     [
         f.createIfcPolyline(map(f.createIfcCartesianPoint, inner_1)),
         f.createIfcPolyline(map(f.createIfcCartesianPoint, inner_2)),
-    ]
+    ],
 )
 f.write(f"fail-arbitrary-profile-with-voids-curve-ifc2x3.ifc")
 
@@ -40,7 +40,7 @@ f.createIfcArbitraryProfileDefWithVoids(
     [
         f.createIfcPolyline(map(f.createIfcCartesianPoint, inner_1)),
         f.createIfcPolyline(map(f.createIfcCartesianPoint, inner_2)),
-    ]
+    ],
 )
 f.write(f"fail-arbitrary-profile-with-voids-3d-outer-ifc2x3.ifc")
 
@@ -52,7 +52,7 @@ f.createIfcArbitraryProfileDefWithVoids(
     [
         f.createIfcPolyline(map(f.createIfcCartesianPoint, make_3d(inner_1))),
         f.createIfcPolyline(map(f.createIfcCartesianPoint, inner_2)),
-    ]
+    ],
 )
 f.write(f"fail-arbitrary-profile-with-voids-3d-inner-ifc2x3.ifc")
 
@@ -64,7 +64,7 @@ f.createIfcArbitraryProfileDefWithVoids(
     [
         f.createIfcPolyline(map(f.createIfcCartesianPoint, make_3d(inner_1))),
         f.createIfcPolyline(map(f.createIfcCartesianPoint, make_3d(inner_2))),
-    ]
+    ],
 )
 f.write(f"fail-arbitrary-profile-with-voids-3d-inner-2-ifc2x3.ifc")
 
@@ -73,14 +73,6 @@ f.createIfcArbitraryProfileDefWithVoids(
     "AREA",
     None,
     f.createIfcPolyline(map(f.createIfcCartesianPoint, coords)),
-    [
-        f.createIfcLine(
-            f.createIfcCartesianPoint((0., 0.)),
-            f.createIfcVector(
-                f.createIfcDirection((0., 0.)),
-                1.
-            )
-        )
-    ]
+    [f.createIfcLine(f.createIfcCartesianPoint((0.0, 0.0)), f.createIfcVector(f.createIfcDirection((0.0, 0.0)), 1.0))],
 )
-f.write(f"fail-arbitrary-profile-with-voids-inner-line-ifc2x3.ifc")
+f.write(f"fail-arbitrary-profile-with-voids-inner-line-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_13.py

@@ -1,77 +1,75 @@
 import ifcopenshell
 
-coords = [(0., 0.), (10., 0.), (10., 10.), (0., 10.)]
-make_3d = lambda cs: [c + (0.,) for c in cs]
-inner_1 = [(1., 1.), (2., 1.), (2., 2.), (1., 2.)]
-inner_2 = [(3., 3.), (4., 3.), (4., 4.), (3., 4.)]
+coords = [(0.0, 0.0), (10.0, 0.0), (10.0, 10.0), (0.0, 10.0)]
+make_3d = lambda cs: [c + (0.0,) for c in cs]
+inner_1 = [(1.0, 1.0), (2.0, 1.0), (2.0, 2.0), (1.0, 2.0)]
+inner_2 = [(3.0, 3.0), (4.0, 3.0), (4.0, 4.0), (3.0, 4.0)]
 
 old_map = map
 map = lambda fn, *args: list(old_map(fn, *args))
 
 f = ifcopenshell.file(schema="IFC2X3")
-f.createIfcAxis2Placement3D(
-    f.createIfcCartesianPoint((0., 0., 0.))
-)
+f.createIfcAxis2Placement3D(f.createIfcCartesianPoint((0.0, 0.0, 0.0)))
 f.write(f"pass-axis2-3d-pos-ifc2x3.ifc")
 
 f = ifcopenshell.file(schema="IFC2X3")
 f.createIfcAxis2Placement3D(
-    f.createIfcCartesianPoint((0., 0., 0.)),
-    f.createIfcDirection((0., 0., 1.)),
-    f.createIfcDirection((1., 0., 0.)),
+    f.createIfcCartesianPoint((0.0, 0.0, 0.0)),
+    f.createIfcDirection((0.0, 0.0, 1.0)),
+    f.createIfcDirection((1.0, 0.0, 0.0)),
 )
 f.write(f"pass-axis2-two-directions-ifc2x3.ifc")
 
 f = ifcopenshell.file(schema="IFC2X3")
 f.createIfcAxis2Placement3D(
-    f.createIfcCartesianPoint((0., 0., 0.)),
-    Axis=f.createIfcDirection((0., 0., 1.)),
+    f.createIfcCartesianPoint((0.0, 0.0, 0.0)),
+    Axis=f.createIfcDirection((0.0, 0.0, 1.0)),
     RefDirection=None,
 )
 f.write(f"fail-axis2-only-axis-ifc2x3.ifc")
 
 f = ifcopenshell.file(schema="IFC2X3")
 f.createIfcAxis2Placement3D(
-    f.createIfcCartesianPoint((0., 0., 0.)),
+    f.createIfcCartesianPoint((0.0, 0.0, 0.0)),
     Axis=None,
-    RefDirection=f.createIfcDirection((1., 0., 0.)),
+    RefDirection=f.createIfcDirection((1.0, 0.0, 0.0)),
 )
 f.write(f"fail-axis2-only-ref-ifc2x3.ifc")
 
 f = ifcopenshell.file(schema="IFC2X3")
 f.createIfcAxis2Placement3D(
-    f.createIfcCartesianPoint((0., 0., 0.)),
-    f.createIfcDirection((1., 0.)),
-    f.createIfcDirection((0., 1., 0.)),
+    f.createIfcCartesianPoint((0.0, 0.0, 0.0)),
+    f.createIfcDirection((1.0, 0.0)),
+    f.createIfcDirection((0.0, 1.0, 0.0)),
 )
 f.write(f"fail-axis2-2d-axis-ifc2x3.ifc")
 
 f = ifcopenshell.file(schema="IFC2X3")
 f.createIfcAxis2Placement3D(
-    f.createIfcCartesianPoint((0., 0.)),
+    f.createIfcCartesianPoint((0.0, 0.0)),
 )
 f.write(f"fail-axis2-2d-pos-ifc2x3.ifc")
 
 f = ifcopenshell.file(schema="IFC2X3")
 f.createIfcAxis2Placement3D(
-    f.createIfcCartesianPoint((0., 0., 0.)),
-    f.createIfcDirection((0., 0., 1.)),
-    f.createIfcDirection((1., 0.)),
+    f.createIfcCartesianPoint((0.0, 0.0, 0.0)),
+    f.createIfcDirection((0.0, 0.0, 1.0)),
+    f.createIfcDirection((1.0, 0.0)),
 )
 f.write(f"fail-axis2-2d-ref-ifc2x3.ifc")
 
 f = ifcopenshell.file(schema="IFC2X3")
 f.createIfcAxis2Placement3D(
-    f.createIfcCartesianPoint((0., 0., 0.)),
-    Axis=f.createIfcDirection((0., 0., 1.)),
-    RefDirection=f.createIfcDirection((0., 0., 1.)),
+    f.createIfcCartesianPoint((0.0, 0.0, 0.0)),
+    Axis=f.createIfcDirection((0.0, 0.0, 1.0)),
+    RefDirection=f.createIfcDirection((0.0, 0.0, 1.0)),
 )
 f.write(f"fail-axis2-parallel-axes.ifc")
 
 f = ifcopenshell.file(schema="IFC2X3")
 f.createIfcAxis2Placement3D(
-    f.createIfcCartesianPoint((0., 0., 0.)),
-    Axis=f.createIfcDirection((0., 0., 1.)),
-    RefDirection=f.createIfcDirection((0., 0., -1.)),
+    f.createIfcCartesianPoint((0.0, 0.0, 0.0)),
+    Axis=f.createIfcDirection((0.0, 0.0, 1.0)),
+    RefDirection=f.createIfcDirection((0.0, 0.0, -1.0)),
 )
 f.write(f"fail-axis2-anti-parallel-axes.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_14.py

@@ -1,26 +1,19 @@
 import ifcopenshell
 
 dims = [
-    (1,0,0,0,0,0,0),
-    (1,1,0,0,0,0,0),
-    (0,1,0,0,0,0,0),
-    (-1,0,0,0,0,0,0),
-    (2,0,0,0,0,0,0),
+    (1, 0, 0, 0, 0, 0, 0),
+    (1, 1, 0, 0, 0, 0, 0),
+    (0, 1, 0, 0, 0, 0, 0),
+    (-1, 0, 0, 0, 0, 0, 0),
+    (2, 0, 0, 0, 0, 0, 0),
 ]
 
 for i, d in enumerate(dims):
     f = ifcopenshell.file(schema="IFC2X3")
     f.createIfcConversionBasedUnit(
         f.createIfcDimensionalExponents(*d),
-        'LENGTHUNIT',
-        'beard-second',
-        f.createIfcMeasureWithUnit(
-            f.createIfcLengthMeasure(5.0),
-            f.createIfcSIUnit(
-                Prefix='NANO',
-                Name='METRE'
-            )
-        )
-        
+        "LENGTHUNIT",
+        "beard-second",
+        f.createIfcMeasureWithUnit(f.createIfcLengthMeasure(5.0), f.createIfcSIUnit(Prefix="NANO", Name="METRE")),
     )
     f.write(f"{'pass' if i == 0 else 'fail'}-conv-unit-{i}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_15.py

@@ -1,72 +1,77 @@
 import ifcopenshell
 
-coords = [(0., 0.), (10., 0.)]
-coords_2 = [(0., 0.), (10., 0.), (10., 10.), (0., 10.)]
-make_3d = lambda cs: [c + (0.,) for c in cs]
-make_nd = lambda d: lambda c: (c + (0.,)) if d == 3 else c
+coords = [(0.0, 0.0), (10.0, 0.0)]
+coords_2 = [(0.0, 0.0), (10.0, 0.0), (10.0, 10.0), (0.0, 10.0)]
+make_3d = lambda cs: [c + (0.0,) for c in cs]
+make_nd = lambda d: lambda c: (c + (0.0,)) if d == 3 else c
 
 old_map = map
 map = lambda fn, *args: list(old_map(fn, *args))
 
 poly_2d = lambda f: [f.createIfcPolyline(map(f.createIfcCartesianPoint, coords))]
 poly_3d = lambda f: [f.createIfcPolyline(map(f.createIfcCartesianPoint, make_3d(coords)))]
-plane = lambda f: [f.createIfcPlane(f.createIfcAxis2Placement3D(f.createIfcCartesianPoint((0., 0., 0.))))]
-fbsm = lambda f: [f.createIfcFaceBasedSurfaceModel(
-    FbsmFaces=[f.createIfcOpenShell(
-        CfsFaces=[f.createIfcFace(
-            Bounds=[f.createIfcFaceOuterBound(
-                Bound=f.createIfcPolyLoop(
-                    Polygon=map(f.createIfcCartesianPoint, make_3d(coords_2))
-                )
-            )]
-        )]
-    )]
-)]
-extrusion = lambda f: [f.createIfcExtrudedAreaSolid(
-    f.createIfcRectangleProfileDef(
-        "AREA", None,
-        f.createIfcAxis2Placement2D(
-            f.createIfcCartesianPoint((0., 0.))
-        ), 1., 1.
-    ),
-    f.createIfcAxis2Placement3D(
-        f.createIfcCartesianPoint((0., 0., 0.))
-    ),
-    f.createIfcDirection((0., 0., 1.)),
-    1.
-)]
-bbox = lambda f: [f.createIfcBoundingBox(
-    f.createIfcCartesianPoint((0., 0., 0.)),
-    1., 1., 1.
-)]
+plane = lambda f: [f.createIfcPlane(f.createIfcAxis2Placement3D(f.createIfcCartesianPoint((0.0, 0.0, 0.0))))]
+fbsm = lambda f: [
+    f.createIfcFaceBasedSurfaceModel(
+        FbsmFaces=[
+            f.createIfcOpenShell(
+                CfsFaces=[
+                    f.createIfcFace(
+                        Bounds=[
+                            f.createIfcFaceOuterBound(
+                                Bound=f.createIfcPolyLoop(Polygon=map(f.createIfcCartesianPoint, make_3d(coords_2)))
+                            )
+                        ]
+                    )
+                ]
+            )
+        ]
+    )
+]
+extrusion = lambda f: [
+    f.createIfcExtrudedAreaSolid(
+        f.createIfcRectangleProfileDef(
+            "AREA", None, f.createIfcAxis2Placement2D(f.createIfcCartesianPoint((0.0, 0.0))), 1.0, 1.0
+        ),
+        f.createIfcAxis2Placement3D(f.createIfcCartesianPoint((0.0, 0.0, 0.0))),
+        f.createIfcDirection((0.0, 0.0, 1.0)),
+        1.0,
+    )
+]
+bbox = lambda f: [f.createIfcBoundingBox(f.createIfcCartesianPoint((0.0, 0.0, 0.0)), 1.0, 1.0, 1.0)]
 
 gcs = lambda fn: lambda f: [f.createIfcGeometricSet(fn(f))]
 repeat = lambda n, fn: lambda f: fn(f) * n
 
 options = [
-    (True, 2, 'Curve2D', '2d-polyline', poly_2d),
-    (False, 3, 'Curve2D', '3d-polyline', poly_3d),
-    (True, 2, 'GeometricCurveSet', 'with-curve', gcs(poly_2d)),
-    (False, 3, 'GeometricCurveSet', 'with-surface', gcs(plane)),
-    (False, 3, 'SurfaceModel', '3d-polyline', poly_3d),
-    (True, 3, 'SurfaceModel', 'surface-model', fbsm),
-    (False, 3, 'SweptSolid', '3d-polyline', poly_3d),
-    (True, 3, 'SweptSolid', 'extrusion', extrusion),
-    (True, 3, 'BoundingBox', 'single-bbox', bbox),
-    (False, 3, 'BoundingBox', 'multiple-bbox', repeat(2, bbox)),
+    (True, 2, "Curve2D", "2d-polyline", poly_2d),
+    (False, 3, "Curve2D", "3d-polyline", poly_3d),
+    (True, 2, "GeometricCurveSet", "with-curve", gcs(poly_2d)),
+    (False, 3, "GeometricCurveSet", "with-surface", gcs(plane)),
+    (False, 3, "SurfaceModel", "3d-polyline", poly_3d),
+    (True, 3, "SurfaceModel", "surface-model", fbsm),
+    (False, 3, "SweptSolid", "3d-polyline", poly_3d),
+    (True, 3, "SweptSolid", "extrusion", extrusion),
+    (True, 3, "BoundingBox", "single-bbox", bbox),
+    (False, 3, "BoundingBox", "multiple-bbox", repeat(2, bbox)),
 ]
 
 for is_valid, dims, rep_type, name, fn in options:
     f = ifcopenshell.file(schema="IFC2X3")
-    f.createIfcProductDefinitionShape(Representations=[
-        f.createIfcShapeRepresentation(
-            f.createIfcGeometricRepresentationContext(
-                None, None, dims, None,
-                f.create_entity(f'IfcAxis2Placement{dims}D', f.createIfcCartesianPoint(make_nd(dims)((0., 0.)))),
-            ),
-            'Body',
-            rep_type,
-            fn(f)
-        )
-    ])    
+    f.createIfcProductDefinitionShape(
+        Representations=[
+            f.createIfcShapeRepresentation(
+                f.createIfcGeometricRepresentationContext(
+                    None,
+                    None,
+                    dims,
+                    None,
+                    f.create_entity(f"IfcAxis2Placement{dims}D", f.createIfcCartesianPoint(make_nd(dims)((0.0, 0.0)))),
+                ),
+                "Body",
+                rep_type,
+                fn(f),
+            )
+        ]
+    )
     f.write(f"{'pass' if is_valid else 'fail'}-shaperep-{rep_type.lower()}-{name}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_16.py

@@ -1,10 +1,7 @@
 import time
 import ifcopenshell
 
-names = [
-    ("Same", "Same"),
-    ("Different", "SomethingElse")
-]
+names = [("Same", "Same"), ("Different", "SomethingElse")]
 
 make_prop = lambda f: lambda nm: f.createIfcPropertySingleValue(Name=nm)
 
@@ -19,11 +16,6 @@ for nms in names:
     appl = f.createIfcApplication(o, ifcopenshell.version, "IfcOpenShell", f"IfcOpenShell {ifcopenshell.version}")
     units = f.createIfcUnitAssignment(Units=[f.createIfcSIUnit(None, "LENGTHUNIT", None, "METRE")])
     ownerhist = f.createIfcOwnerHistory(pando, appl, ChangeAction="ADDED", CreationDate=int(time.time()))
-    f.createIfcPropertySet(
-        ifcopenshell.guid.new(),
-        ownerhist,
-        "MyPset",
-        HasProperties=map(make_prop(f), nms)
-    )
+    f.createIfcPropertySet(ifcopenshell.guid.new(), ownerhist, "MyPset", HasProperties=map(make_prop(f), nms))
     f.write(f"{'pass' if len(set(nms)) == len(nms) else 'fail'}-property-{'-'.join(map(str.lower, nms))}-ifc2x3.ifc")
-15
+15

src/ifcopenshell-python/test/fixtures/rules/generate_17.py

@@ -9,18 +9,12 @@ for i, nm in enumerate(("no-mls", "mls", "mlsu")):
     appl = f.createIfcApplication(o, ifcopenshell.version, "IfcOpenShell", f"IfcOpenShell {ifcopenshell.version}")
     units = f.createIfcUnitAssignment(Units=[f.createIfcSIUnit(None, "LENGTHUNIT", None, "METRE")])
     ownerhist = f.createIfcOwnerHistory(pando, appl, ChangeAction="ADDED", CreationDate=int(time.time()))
-    wall = f.createIfcWallStandardCase(
-        ifcopenshell.guid.new(),
-        ownerhist
-    )
-    if i in (1,2):
+    wall = f.createIfcWallStandardCase(ifcopenshell.guid.new(), ownerhist)
+    if i in (1, 2):
         mls = f.createIfcMaterialLayerSet([f.createIfcMaterialLayer(None, 0.1)])
         if i == 2:
-            mls = f.createIfcMaterialLayerSetUsage(mls, 'AXIS2', 'POSITIVE', 0.)
+            mls = f.createIfcMaterialLayerSetUsage(mls, "AXIS2", "POSITIVE", 0.0)
         f.createIfcRelAssociatesMaterial(
-            ifcopenshell.guid.new(),
-            ownerhist,
-            RelatedObjects=[wall],
-            RelatingMaterial=mls
+            ifcopenshell.guid.new(), ownerhist, RelatedObjects=[wall], RelatingMaterial=mls
         )
     f.write(f"{'pass' if i == 2 else 'fail'}-wall-{nm}-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_18.py

@@ -1,12 +1,12 @@
 import ifcopenshell
 
-for i, type_decl in enumerate(('IfcLengthMeasure', 'IfcPlaneAngleMeasure')):
+for i, type_decl in enumerate(("IfcLengthMeasure", "IfcPlaneAngleMeasure")):
     f = ifcopenshell.file(schema="IFC4X3_ADD1")
     f.createIfcRigidOperation(
-        SourceCRS=f.createIfcGeographicCRS('EPSG:4326'),
-        TargetCRS=f.createIfcGeographicCRS('EPSG:3857'),
+        SourceCRS=f.createIfcGeographicCRS("EPSG:4326"),
+        TargetCRS=f.createIfcGeographicCRS("EPSG:3857"),
         FirstCoordinate=f.create_entity(type_decl, 0.0),
-        SecondCoordinate=f.create_entity('IfcPlaneAngleMeasure', 0.0),
-        Height=0.0
+        SecondCoordinate=f.create_entity("IfcPlaneAngleMeasure", 0.0),
+        Height=0.0,
     )
     f.write(f"{'pass' if i else 'fail'}-rigid-op-IfcPlaneAngleMeasure-{type_decl}-ifc4x3_add1.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_19.py

@@ -1,18 +1,16 @@
 import ifcopenshell
 
-make_nd = lambda d: lambda *c: (c + (0.,)) if d == 3 else c
+make_nd = lambda d: lambda *c: (c + (0.0,)) if d == 3 else c
 
-for d1, d2 in ((2,3), (3,3), (3,2)):
+for d1, d2 in ((2, 3), (3, 3), (3, 2)):
     f = ifcopenshell.file(schema="IFC2X3")
     f.createIfcLocalPlacement(
         PlacementRelTo=f.createIfcLocalPlacement(
             PlacementRelTo=None,
-            RelativePlacement=f.create_entity(f'IfcAxis2Placement{d1}D',
-                f.createIfcCartesianPoint(make_nd(d1)(0., 0.))
-            )
+            RelativePlacement=f.create_entity(
+                f"IfcAxis2Placement{d1}D", f.createIfcCartesianPoint(make_nd(d1)(0.0, 0.0))
+            ),
         ),
-        RelativePlacement=f.create_entity(f'IfcAxis2Placement{d2}D',
-            f.createIfcCartesianPoint(make_nd(d2)(0., 0.))
-        )
+        RelativePlacement=f.create_entity(f"IfcAxis2Placement{d2}D", f.createIfcCartesianPoint(make_nd(d2)(0.0, 0.0))),
     )
     f.write(f"{'pass' if d1 >= d2 else 'fail'}-placement-{d1}d-{d2}d-ifc2x3.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_20.py

@@ -1,10 +1,10 @@
 import ifcopenshell
 
-task = lambda f: f.createIfcTask(ifcopenshell.guid.new(),None,'sleep',IsMilestone=True)
+task = lambda f: f.createIfcTask(ifcopenshell.guid.new(), None, "sleep", IsMilestone=True)
 wall = lambda f: f.createIfcWall(ifcopenshell.guid.new())
 
-for i,fn in enumerate((task, wall)):
+for i, fn in enumerate((task, wall)):
     f = ifcopenshell.file(schema="IFC4")
     elem = fn(f)
-    f.createIfcRelAssociatesMaterial(ifcopenshell.guid.new(), None, None, None, [elem], f.createIfcMaterial('brick'))
+    f.createIfcRelAssociatesMaterial(ifcopenshell.guid.new(), None, None, None, [elem], f.createIfcMaterial("brick"))
     f.write(f"{'pass' if i else 'fail'}-assoc-material-{elem.is_a()}-{f.schema}.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_21.py

@@ -1,13 +1,26 @@
 import itertools
 import ifcopenshell
 
-def EXISTS(v): return v is not None
-def NOT(v): return not v
 
-for LiningDepth, LiningThickness in itertools.product((None, 1.), (None, 1.)):
+def EXISTS(v):
+    return v is not None
+
+
+def NOT(v):
+    return not v
+
+
+for LiningDepth, LiningThickness in itertools.product((None, 1.0), (None, 1.0)):
     f = ifcopenshell.file(schema="IFC4")
     valid = NOT(EXISTS(LiningDepth) and NOT(EXISTS(LiningThickness)))
-    f.createIfcWindowType(ifcopenshell.guid.new(), None, 'WindowType', HasPropertySets=[
-        f.createIfcWindowLiningProperties(ifcopenshell.guid.new(), LiningDepth=LiningDepth, LiningThickness=LiningThickness)
-    ])
-    f.write(f"{'pass' if valid else 'fail'}-lining-properties-{LiningDepth}-{LiningThickness}.ifc")
+    f.createIfcWindowType(
+        ifcopenshell.guid.new(),
+        None,
+        "WindowType",
+        HasPropertySets=[
+            f.createIfcWindowLiningProperties(
+                ifcopenshell.guid.new(), LiningDepth=LiningDepth, LiningThickness=LiningThickness
+            )
+        ],
+    )
+    f.write(f"{'pass' if valid else 'fail'}-lining-properties-{LiningDepth}-{LiningThickness}.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_22.py

@@ -1,21 +1,54 @@
 import ifcopenshell
 
-for cnt in range(0,3):
+for cnt in range(0, 3):
     f = ifcopenshell.file(schema="IFC4")
     elem = f.createIfcWall(ifcopenshell.guid.new())
     for i in range(cnt):
-        f.createIfcRelDefinesByProperties(ifcopenshell.guid.new(), None, None, None, [elem], 
-            f.createIfcPropertySet(ifcopenshell.guid.new(), None, 'Pset_WallCommon', None, [f.createIfcPropertySingleValue('LoadBearing', None, f.createIfcBoolean(True))])
+        f.createIfcRelDefinesByProperties(
+            ifcopenshell.guid.new(),
+            None,
+            None,
+            None,
+            [elem],
+            f.createIfcPropertySet(
+                ifcopenshell.guid.new(),
+                None,
+                "Pset_WallCommon",
+                None,
+                [f.createIfcPropertySingleValue("LoadBearing", None, f.createIfcBoolean(True))],
+            ),
         )
     f.write(f"{'pass' if cnt < 2 else 'fail'}-wall-{cnt}-same-psets.ifc")
 
 
 f = ifcopenshell.file(schema="IFC4")
 elem = f.createIfcWall(ifcopenshell.guid.new())
-f.createIfcRelDefinesByProperties(ifcopenshell.guid.new(), None, None, None, [elem], 
-    f.createIfcPropertySet(ifcopenshell.guid.new(), None, 'Pset_WallCommon', None, [f.createIfcPropertySingleValue('LoadBearing', None, f.createIfcBoolean(True))])
+f.createIfcRelDefinesByProperties(
+    ifcopenshell.guid.new(),
+    None,
+    None,
+    None,
+    [elem],
+    f.createIfcPropertySet(
+        ifcopenshell.guid.new(),
+        None,
+        "Pset_WallCommon",
+        None,
+        [f.createIfcPropertySingleValue("LoadBearing", None, f.createIfcBoolean(True))],
+    ),
 )
-f.createIfcRelDefinesByProperties(ifcopenshell.guid.new(), None, None, None, [elem], 
-    f.createIfcPropertySet(ifcopenshell.guid.new(), None, 'Custom', None, [f.createIfcPropertySingleValue('IsBeautiful', None, f.createIfcBoolean(True))])
+f.createIfcRelDefinesByProperties(
+    ifcopenshell.guid.new(),
+    None,
+    None,
+    None,
+    [elem],
+    f.createIfcPropertySet(
+        ifcopenshell.guid.new(),
+        None,
+        "Custom",
+        None,
+        [f.createIfcPropertySingleValue("IsBeautiful", None, f.createIfcBoolean(True))],
+    ),
 )
-f.write(f"pass-wall-different-psets.ifc")
+f.write(f"pass-wall-different-psets.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_23.py

@@ -1,14 +1,14 @@
 import ifcopenshell
 
 fns = [
-    (False, lambda f: f.createIfcLengthMeasure(-1.)),
-    (True, lambda f: f.createIfcLengthMeasure(1.)),
-    (True, lambda f: f.createIfcPositiveLengthMeasure(1.)),
-    (False, lambda f: f.createIfcDescriptiveMeasure('large'))
+    (False, lambda f: f.createIfcLengthMeasure(-1.0)),
+    (True, lambda f: f.createIfcLengthMeasure(1.0)),
+    (True, lambda f: f.createIfcPositiveLengthMeasure(1.0)),
+    (False, lambda f: f.createIfcDescriptiveMeasure("large")),
 ]
 
 for valid, fn in fns:
     f = ifcopenshell.file(schema="IFC4")
     fs = fn(f)
-    f.createIfcTextStyleFontModel('Comic Sans', ('Comic Sans',), FontSize=fs)
+    f.createIfcTextStyleFontModel("Comic Sans", ("Comic Sans",), FontSize=fs)
     f.write(f"{'pass' if valid else 'fail'}-font-{fs.is_a()}-{fs[0]}.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_24.py

@@ -1,7 +1,18 @@
 import time
 import ifcopenshell
 
-for ents in [('IfcWall',), ('IfcSpace',), ('IfcZone', 'IfcSpace',), ('IfcWall', 'IfcSpace',)]:
+for ents in [
+    ("IfcWall",),
+    ("IfcSpace",),
+    (
+        "IfcZone",
+        "IfcSpace",
+    ),
+    (
+        "IfcWall",
+        "IfcSpace",
+    ),
+]:
     f = ifcopenshell.file(schema="IFC2X3")
     p = f.createIfcPerson(Id="tfk", GivenName="Thomas")
     o = f.createIfcOrganization(Name="AECgeeks")
@@ -9,24 +20,38 @@ for ents in [('IfcWall',), ('IfcSpace',), ('IfcZone', 'IfcSpace',), ('IfcWall',
     appl = f.createIfcApplication(o, ifcopenshell.version, "IfcOpenShell", f"IfcOpenShell {ifcopenshell.version}")
     units = f.createIfcUnitAssignment(Units=[f.createIfcSIUnit(None, "LENGTHUNIT", None, "METRE")])
     ownerhist = f.createIfcOwnerHistory(pando, appl, ChangeAction="ADDED", CreationDate=int(time.time()))
-    proj = f.createIfcProject(ifcopenshell.guid.new(), ownerhist, 'My Project', UnitsInContext=units, RepresentationContexts=[
-      f.createIfcGeometricRepresentationContext(
-            None, None, 3, None,
-            f.create_entity(f'IfcAxis2Placement3D', f.createIfcCartesianPoint((0., 0., 0.))),
-      )
-    ])
+    proj = f.createIfcProject(
+        ifcopenshell.guid.new(),
+        ownerhist,
+        "My Project",
+        UnitsInContext=units,
+        RepresentationContexts=[
+            f.createIfcGeometricRepresentationContext(
+                None,
+                None,
+                3,
+                None,
+                f.create_entity(f"IfcAxis2Placement3D", f.createIfcCartesianPoint((0.0, 0.0, 0.0))),
+            )
+        ],
+    )
+
     def elems():
         for ent in ents:
-            el = f.create_entity(ent,
-                ifcopenshell.guid.new(),
-                ownerhist
-            )
-            if ent == 'IfcZone':
-                f.createIfcRelAssignsToGroup(ifcopenshell.guid.new(),ownerhist,RelatedObjects=[f.createIfcSpace(ifcopenshell.guid.new(),
-                ownerhist)],RelatingGroup=el)
+            el = f.create_entity(ent, ifcopenshell.guid.new(), ownerhist)
+            if ent == "IfcZone":
+                f.createIfcRelAssignsToGroup(
+                    ifcopenshell.guid.new(),
+                    ownerhist,
+                    RelatedObjects=[f.createIfcSpace(ifcopenshell.guid.new(), ownerhist)],
+                    RelatingGroup=el,
+                )
             yield el
-    zone = f.createIfcZone(ifcopenshell.guid.new(),ownerhist)
-    f.createIfcRelAssignsToGroup(ifcopenshell.guid.new(),ownerhist,RelatedObjects=list(elems()),RelatingGroup=zone)
-    f.createIfcRelAggregates(ifcopenshell.guid.new(),ownerhist,RelatingObject=proj,RelatedObjects=f.by_type('IfcSpace'))
-    valid = not (set(ents) - {'IfcZone', 'IfcSpace'})
+
+    zone = f.createIfcZone(ifcopenshell.guid.new(), ownerhist)
+    f.createIfcRelAssignsToGroup(ifcopenshell.guid.new(), ownerhist, RelatedObjects=list(elems()), RelatingGroup=zone)
+    f.createIfcRelAggregates(
+        ifcopenshell.guid.new(), ownerhist, RelatingObject=proj, RelatedObjects=f.by_type("IfcSpace")
+    )
+    valid = not (set(ents) - {"IfcZone", "IfcSpace"})
     f.write(f"{'pass' if valid else 'fail'}-zone-with-{'-'.join(ents)}-{f.schema.lower()}.ifc")

src/ifcopenshell-python/test/fixtures/rules/generate_25.py

@@ -2,13 +2,15 @@ import ifcopenshell
 
 segs = [
     lambda _: None,
-    lambda f: [f.createIfcLineIndex((1,2)),f.createIfcLineIndex((2,3))],
-    lambda f: [f.createIfcLineIndex((1,2)),f.createIfcLineIndex((1,2))]
+    lambda f: [f.createIfcLineIndex((1, 2)), f.createIfcLineIndex((2, 3))],
+    lambda f: [f.createIfcLineIndex((1, 2)), f.createIfcLineIndex((1, 2))],
 ]
 
-for schema in ('ifc4', 'ifc4x3_add1'):
+for schema in ("ifc4", "ifc4x3_add1"):
     for i, seg in enumerate(segs):
         f = ifcopenshell.file(schema=schema)
         s = seg(f)
-        f.createIfcIndexedPolyCurve(f.createIfcCartesianPointList2D([(0.0, 0.0),(0.0, 1.0),(1.0, 1.0)]), s)
-        f.write(f'{"fail" if i == 2 else "pass"}-poly-curve-{"no-segments" if s is None else "-".join(["-".join(map(str, x[0])) for x in s])}-{schema}.ifc')
+        f.createIfcIndexedPolyCurve(f.createIfcCartesianPointList2D([(0.0, 0.0), (0.0, 1.0), (1.0, 1.0)]), s)
+        f.write(
+            f'{"fail" if i == 2 else "pass"}-poly-curve-{"no-segments" if s is None else "-".join(["-".join(map(str, x[0])) for x in s])}-{schema}.ifc'
+        )

src/ifcopenshell-python/test/global_id_updates.py

@@ -6,21 +6,22 @@ import ifcopenshell.guid
 def test_global_id_updates():
     g1, g2, g3 = (ifcopenshell.guid.new() for i in range(3))
     f = ifcopenshell.file()
-    
+
     f.createIfcWall(g1)
     f[g1].GlobalId = g2
     with pytest.raises(RuntimeError):
         f[g1]
     assert f[g2]
-    
+
     inst = f.createIfcWall()
     inst.GlobalId = g3
     assert f[g3]
-    
+
     # Non-unique guid, succeeds but logs an error
     ifcopenshell.get_log()
     inst = f.createIfcWall(g3)
     assert "Overwriting" in ifcopenshell.get_log()
 
+
 if __name__ == "__main__":
     pytest.main(["-sx", __file__])

src/ifcopenshell-python/test/instance_string_formatting.py

@@ -2,17 +2,19 @@ import pytest
 import ifcopenshell
 import ifcopenshell.guid
 
+
 def test_file_gc():
     f = ifcopenshell.file()
     inst = f.createIfcWall(ifcopenshell.guid.new(), Name=chr(0x1F37A))
     # 0x1F37A should be encoded using X4
-    assert '\\X4\\' in inst.to_string()
+    assert "\\X4\\" in inst.to_string()
     # to_string() should use upper case entity names
-    assert 'IFCWALL' in inst.to_string()
+    assert "IFCWALL" in inst.to_string()
     # __str__ uses camel case entity names
-    assert 'IfcWall' in str(inst)
+    assert "IfcWall" in str(inst)
     # in fact, __str__ is equal to to_string(False)
     assert str(inst) == inst.to_string(False)
 
+
 if __name__ == "__main__":
     pytest.main(["-sx", __file__])

src/ifcopenshell-python/test/test_file_inverse.py

@@ -9,11 +9,11 @@ import ifcopenshell.api
 
 
 def test_inverse_indices():
-    f =  ifcopenshell.file()
+    f = ifcopenshell.file()
 
-    p0 = f.createIfcCartesianPoint((0.,0.,0.))
-    p1 = f.createIfcCartesianPoint((1.,0.,0.))
-    p2 = f.createIfcCartesianPoint((1.,1.,0.))
+    p0 = f.createIfcCartesianPoint((0.0, 0.0, 0.0))
+    p1 = f.createIfcCartesianPoint((1.0, 0.0, 0.0))
+    p2 = f.createIfcCartesianPoint((1.0, 1.0, 0.0))
 
     poly = f.createIfcPolyline((p0, p1, p2, p0))
     place = f.createIfcAxis2Placement3D(p0)
@@ -26,7 +26,7 @@ def test_inverse_indices():
             # @nb this doesn't account for nested lists
             v = list(v)
             i = v.index(p0)
-            v[i:i+1] = []
+            v[i : i + 1] = []
         else:
             v = p1
         inst[idx] = v

src/ifcopenshell-python/test/test_open.py

@@ -32,24 +32,16 @@ class TestOpen:
         assert ifcopenshell.open(TEST_FILE_DIR / "wall-with-opening-and-window.ifcxml")
 
     def test_open_ifc_zip_ifcxml_format(self):
-        assert ifcopenshell.open(
-            TEST_FILE_DIR / "wall-with-opening-and-window_ifcxml_format.ifczip"
-        )
+        assert ifcopenshell.open(TEST_FILE_DIR / "wall-with-opening-and-window_ifcxml_format.ifczip")
 
     def test_open_ifc_zip_ifcspf_format(self):
-        assert ifcopenshell.open(
-            TEST_FILE_DIR / "WallInstance_IFC4Add2_ifcspf_format.ifczip"
-        )
+        assert ifcopenshell.open(TEST_FILE_DIR / "WallInstance_IFC4Add2_ifcspf_format.ifczip")
 
     def test_open_zip(self):
-        assert ifcopenshell.open(
-            TEST_FILE_DIR / "WallInstance_IFC4Add2_ifcspf_format.zip"
-        )
+        assert ifcopenshell.open(TEST_FILE_DIR / "WallInstance_IFC4Add2_ifcspf_format.zip")
 
     def test_open_anyextension_ifcspf_format(self):
-        assert ifcopenshell.open(
-            TEST_FILE_DIR / "WallInstance_IFC4Add2_ifcspf_format.anyextension"
-        )
+        assert ifcopenshell.open(TEST_FILE_DIR / "WallInstance_IFC4Add2_ifcspf_format.anyextension")
 
     def test_open_anyextension_ifczip_ifcspf_format(self):
         assert ifcopenshell.open(

src/ifcopenshell-python/test/test_rules.py

@@ -9,10 +9,13 @@ import ifcopenshell.validate
 import ifcopenshell.express.rule_executor
 
 
-
 @pytest.mark.parametrize(
     "filename",
-    [fn for fn in glob.glob(os.path.join(os.path.dirname(__file__), "fixtures/rules/*.ifc")) if len(sys.argv) < 2 or sys.argv[1] in os.path.basename(fn)],
+    [
+        fn
+        for fn in glob.glob(os.path.join(os.path.dirname(__file__), "fixtures/rules/*.ifc"))
+        if len(sys.argv) < 2 or sys.argv[1] in os.path.basename(fn)
+    ],
 )
 def test_file(filename):
     base = os.path.basename(filename)
@@ -27,12 +30,14 @@ def test_file(filename):
     print(f"{len(results)} errors")
 
     if results:
-        print(tabulate.tabulate(
-            [[c or '' for c in r.values()] for r in results],
-            maxcolwidths=[20,100,20],
-            tablefmt="simple_grid",
-            headers=results[0].keys()
-        ))
+        print(
+            tabulate.tabulate(
+                [[c or "" for c in r.values()] for r in results],
+                maxcolwidths=[20, 100, 20],
+                tablefmt="simple_grid",
+                headers=results[0].keys(),
+            )
+        )
 
     if base.startswith("fail-"):
         assert len(results) > 0

src/ifcopenshell-python/test/test_wall_opening.py

@@ -230,7 +230,11 @@ class TestWallOpenings:
 
                 if i == 0 and j == 0:
                     for ln, st in cs:
-                        assert len([l for l in log if l.startswith(st)]) == ln, f"\nOn file:\n - {fn}\nMessages:" +  "".join(f'\n - "{l}"' for l in log) + f"\nExpected:\n - \"{st}\""
+                        assert len([l for l in log if l.startswith(st)]) == ln, (
+                            f"\nOn file:\n - {fn}\nMessages:"
+                            + "".join(f'\n - "{l}"' for l in log)
+                            + f'\nExpected:\n - "{st}"'
+                        )
 
                 # breakpoint()
 

src/ifcopenshell-python/test/util/test_element.py

@@ -379,23 +379,17 @@ class TestGetMaterial(test.bootstrap.IFC4):
 
     def test_getting_a_material_layer_set_of_a_product(self):
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        rel = ifcopenshell.api.material.assign_material(
-            self.file, products=[element], type="IfcMaterialLayerSet"
-        )
+        rel = ifcopenshell.api.material.assign_material(self.file, products=[element], type="IfcMaterialLayerSet")
         assert subject.get_material(element) == rel.RelatingMaterial
 
     def test_getting_a_material_profile_set_of_a_product(self):
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        rel = ifcopenshell.api.material.assign_material(
-            self.file, products=[element], type="IfcMaterialProfileSet"
-        )
+        rel = ifcopenshell.api.material.assign_material(self.file, products=[element], type="IfcMaterialProfileSet")
         assert subject.get_material(element) == rel.RelatingMaterial
 
     def test_getting_a_material_layer_set_usage_of_a_product(self):
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        rel = ifcopenshell.api.material.assign_material(
-            self.file, products=[element], type="IfcMaterialLayerSetUsage"
-        )
+        rel = ifcopenshell.api.material.assign_material(self.file, products=[element], type="IfcMaterialLayerSetUsage")
         assert subject.get_material(element) == rel.RelatingMaterial
 
     def test_getting_a_material_profile_set_usage_of_a_product(self):
@@ -407,9 +401,7 @@ class TestGetMaterial(test.bootstrap.IFC4):
 
     def test_getting_a_material_layer_set_indirectly_from_an_assigned_usage(self):
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
-        rel = ifcopenshell.api.material.assign_material(
-            self.file, products=[element], type="IfcMaterialLayerSetUsage"
-        )
+        rel = ifcopenshell.api.material.assign_material(self.file, products=[element], type="IfcMaterialLayerSetUsage")
         assert subject.get_material(element, should_skip_usage=True) == rel.RelatingMaterial.ForLayerSet
 
     def test_getting_a_material_profile_set_indirectly_from_an_assigned_usage(self):
@@ -501,9 +493,7 @@ class TestGetStyles(test.bootstrap.IFC4):
             self.file, context=body, length=5, height=3, thickness=0.118
         )
 
-        ifcopenshell.api.geometry.assign_representation(
-            self.file, product=element, representation=representation
-        )
+        ifcopenshell.api.geometry.assign_representation(self.file, product=element, representation=representation)
         ifcopenshell.api.style.assign_representation_styles(
             self.file, shape_representation=representation, styles=[style2]
         )
@@ -540,9 +530,7 @@ class TestGetElementsByMaterial(test.bootstrap.IFC4):
         material_set = ifcopenshell.api.material.add_material_set(self.file, set_type="IfcMaterialProfileSet")
         ifcopenshell.api.material.add_profile(self.file, profile_set=material_set, material=material)
         ifcopenshell.api.material.assign_material(self.file, products=[element_type], material=material_set)
-        ifcopenshell.api.material.assign_material(
-            self.file, products=[element], type="IfcMaterialProfileSetUsage"
-        )
+        ifcopenshell.api.material.assign_material(self.file, products=[element], type="IfcMaterialProfileSetUsage")
         usage = self.file.by_type("IfcMaterialProfileSetUsage")[0]
         assert subject.get_elements_by_material(self.file, material) == {element, element_type}
         assert subject.get_elements_by_material(self.file, material_set) == {element, element_type}
@@ -551,9 +539,7 @@ class TestGetElementsByMaterial(test.bootstrap.IFC4):
     def test_getting_elements_of_a_material_constituent_set(self):
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         material = ifcopenshell.api.material.add_material(self.file)
-        material_set = ifcopenshell.api.material.add_material_set(
-            self.file, set_type="IfcMaterialConstituentSet"
-        )
+        material_set = ifcopenshell.api.material.add_material_set(self.file, set_type="IfcMaterialConstituentSet")
         ifcopenshell.api.material.add_constituent(self.file, constituent_set=material_set, material=material)
         ifcopenshell.api.material.assign_material(self.file, products=[element], material=material_set)
         assert subject.get_elements_by_material(self.file, material) == {element}

src/ifcopenshell-python/test/util/test_pset.py

@@ -57,7 +57,7 @@ class TestPsetQto:
         assert "Pset_FurnitureTypeTable" in names
         names = self.pset_qto.get_applicable_names("IfcFurnitureType", "TABLE")
         assert "Pset_FurnitureTypeTable" in names
-        names = self.pset_qto.get_applicable_names("IfcFurnitureType" )
+        names = self.pset_qto.get_applicable_names("IfcFurnitureType")
         names2 = self.pset_qto.get_applicable_names("IfcFurnitureType", "CUSTOM")
         assert names == names2
 

src/ifcopenshell-python/test/util/test_selector.py

@@ -86,9 +86,7 @@ class TestGetElementValue(test.bootstrap.IFC4):
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         material = ifcopenshell.api.material.add_material(self.file, name="CON01")
         material2 = ifcopenshell.api.material.add_material(self.file, name="CON02")
-        material_set = ifcopenshell.api.material.add_material_set(
-            self.file, name="FOO", set_type="IfcMaterialLayerSet"
-        )
+        material_set = ifcopenshell.api.material.add_material_set(self.file, name="FOO", set_type="IfcMaterialLayerSet")
         layer = ifcopenshell.api.material.add_layer(self.file, layer_set=material_set, material=material)
         layer.Name = "L1"
         layer = ifcopenshell.api.material.add_layer(self.file, layer_set=material_set, material=material)
@@ -113,9 +111,7 @@ class TestGetElementValue(test.bootstrap.IFC4):
         element = ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcWall")
         material = ifcopenshell.api.material.add_material(self.file, name="CON01")
         material2 = ifcopenshell.api.material.add_material(self.file, name="CON02")
-        material_set = ifcopenshell.api.material.add_material_set(
-            self.file, name="FOO", set_type="IfcMaterialLayerSet"
-        )
+        material_set = ifcopenshell.api.material.add_material_set(self.file, name="FOO", set_type="IfcMaterialLayerSet")
         layer = ifcopenshell.api.material.add_layer(self.file, layer_set=material_set, material=material)
         layer.Name = "L1"
         ifcopenshell.api.material.assign_material(self.file, products=[element], material=material_set)

src/ifcopenshell-python/test/util/test_unit.py

@@ -151,6 +151,7 @@ class TestConvertFileLengthUnits(test.bootstrap.IFC4):
         unit_assignment = subject.get_unit_assignment(output)
         assert len(unit_assignment.Units) == 1
 
+
 class TestConvertFileLengthUnitsIFC2X3(test.bootstrap.IFC2X3):
     def test_converting_map_conversion_if_there_is_no_map_unit(self):
         ifcopenshell.api.root.create_entity(self.file, ifc_class="IfcProject")
@@ -171,7 +172,9 @@ class TestConvertFileLengthUnitsIFC2X3(test.bootstrap.IFC2X3):
         ifcopenshell.api.context.add_context(self.file, "Model")
         ifcopenshell.api.georeference.add_georeferencing(self.file)
         ifcopenshell.api.georeference.edit_georeferencing(
-            self.file, projected_crs={"MapUnit": subject.get_full_unit_name(meter)}, coordinate_operation={"Eastings": 10, "Scale": 0.001}
+            self.file,
+            projected_crs={"MapUnit": subject.get_full_unit_name(meter)},
+            coordinate_operation={"Eastings": 10, "Scale": 0.001},
         )
         ifcopenshell.api.unit.assign_unit(self.file, units=[unit])
         output = subject.convert_file_length_units(self.file, target_units="METER")