get_vertical_bounding_planes now also casts rays from the footprint
polygon's corner vertices, offset slightly inward toward the centroid.
This catches bounding elements (e.g. sloped roofs) that only cover a
corner of the space.
Generated with the assistance of an AI coding tool.
Two fixes for space generation:
1. IFC2X3 schema: build_brep_space now falls back to plain
IfcRelSpaceBoundary because IfcRelSpaceBoundary1stLevel does not exist in
IFC2X3.
2. Geometry location: set_space_representation_from_polygon now aligns the
IFC ObjectPlacement with the Blender object, converts base_z/planes and
the footprint polygon to the object's local coordinate system before
building, and fixes the base_z unit scale. The centred-cube regeneration
test was updated to check world bounds because the mesh is now placed
relative to the object placement.
Generated with the assistance of an AI coding tool.
The extrusion height was capped at the top/bottom plane anchor z (the mean
of the ray-cast hits, near the footprint centre), so a sloped ceiling's
high side stopped short of the plane (e.g. 5.5 m instead of 6.88 m for the
shed roof test). Extend the extrusion to the plane's z at every footprint
vertex before clipping, falling back to the base z as before. Also correct
the mirrored profile-to-world mapping comment in the shed roof test helper
(the ridge is at world y=-5, not y=+5).
Generated with the assistance of an AI coding tool.
Cover a curved vertical wall (EXTRUDE_CLIP strategy) in test_space.py and a
sloped slab (clipped extrusion) in test_spatial.py.
Generated with the assistance of an AI coding tool.
Build a faceted B-rep space from auto-generated boundary faces when
sloped or curved bounding elements make a clipped extrusion
unsuitable.
Generated with the assistance of an AI coding tool.
Allow sloped roof/slab/wall faces to bound space faces when the
strict anti-parallel rule leaves a face uncovered, using a
footprint-scaled distance tolerance. Existing matching behaviour
is preserved (fallback-only).
Generated with the assistance of an AI coding tool.
Detect whether a space can be built as a clipped extrusion or needs
a B-rep fallback, based on wall face orientation and top/bottom
bounding planes.
Generated with the assistance of an AI coding tool.
get_vertical_bounding_planes always returns EXTRUDE_CLIP; the
EXTRUDE_CLIP-vs-BREP decision belongs to the calling layer.
Generated with the assistance of an AI coding tool.
Implement get_vertical_bounding_planes using ray-casting from the RL
cut elevation with nearest-hit and coplanar grouping.
Generated with the assistance of an AI coding tool.
_face_matrix_from_verts used only the first 3 vertices and sb.np_normal, which divides by zero when they are collinear. Triangulated meshes from generated spaces often start with collinear boundary vertices, producing NaN matrices and a shapely LinearRing error. Walk the polygon to find a non-degenerate normal and edge.
Generated with the assistance of an AI coding tool.
Vectorize the coplanarity prefilter in _union_coplanar_face_polygon and
compute per-triangle normals once instead of per space face. Add
regression tests for the SmallHouse and Triangle boundary test models.
Generated with the assistance of an AI coding tool.
dissolve_faces with merge_coplanar drops interior rings, so the shaft
opening in a ceiling was lost and replaced by spurious wall-cap
boundaries. Reconstruct the space face from its raw coplanar triangles,
preserve interior rings in the assigned boundary, absorb redundant
candidates by plane offset, and raise the full-face tolerance so walls
offset by their half thickness get a single boundary.
Generated with the assistance of an AI coding tool.
When several elements match the same space face, offset matches that only
duplicate coplanar coverage are now skipped, and a single bounding element
within a small plane offset gets the full space face instead of a clipped
polygon. Existing boundaries are removed before regeneration so stale 2nd
level boundaries are not left behind, and the Bonsai operator delegates
element filtering to auto_generate_boundaries.
Regenerates SmallHouse boundaries to match the reference output and keeps
the ExternalEarth opening unioning intact.
Generated with the assistance of an AI coding tool.
When a building element has multiple ngons matching the same space face,
_process_openings was called multiple times for the same opening/filling,
producing duplicate boundaries (e.g. two boundaries for the same door).
Fix: pass a set of processed filling IDs to _process_openings and skip
already-processed openings.
Generated with the assistance of an AI coding tool.
When merge_coplanar merges two sub-faces that share an edge from the
original BRep (e.g. two rectangles forming an L-shape cap), that shared
edge remained in boundary_edges via original_edges filtering, causing
the edge_adjacency walk to produce wrong polygons.
Fix: after coplanar merging, use edge frequency (edges used by exactly
1 triangle = boundary) instead of original_edges filtering, which
correctly identifies only outer boundary edges.
Also add safety checks: edge_adjacency emptiness guard, infinite loop
protection, and minimum polygon length check.
Generated with the assistance of an AI coding tool.
The a2p placement matrix stores col[0]=X (edge direction) and
col[2]=Z (face normal), but assign_connection_geometry expects
axis=Z (normal) and ref_direction=X (edge).
Generated with the assistance of an AI coding tool.
Move Blender-independent boundary generation algorithm from Bonsai
(GPL) to ifcopenshell.util.boundary (LGPL):
- ifcopenshell.util.shape.dissolve_faces: reconstruct polygonal faces
from triangulated mesh using original edges from get_edges() + Union-Find
- ifcopenshell.util.boundary.auto_generate_boundaries: full boundary
generation algorithm using IFC geometry (numpy, shapely) without
Blender — replaces bmesh, matrix_world, tool.Cad.is_x, mathutils with
numpy equivalents
- Uses existing ifcopenshell.api.boundary.assign_connection_geometry
for connection geometry creation
- Uses existing ifcopenshell.util.placement.a2p + np_normal for face
matrix construction
- BOUNDARY_ELEMENT_CLASSES expanded to include IfcColumn and
IfcCurtainWall
Bonsai's boundary/operator.py auto_generate_boundaries is now a thin
adapter handling Blender-specific preprocessing (flushing moved
objects, building iterator + tree) then delegating to the util module.
Added 12 tests: 3 for dissolve_faces, 3 for auto_generate_boundaries.
Generated with the assistance of an AI coding tool.
Move Blender-independent space generation algorithms from Bonsai
(GPL) to ifcopenshell.util (LGPL):
- ifcopenshell.util.shape.bisect_mesh_plane_vf: vectorized numpy
triangle/plane intersection for mesh bisection
- ifcopenshell.util.element.iter_top_connections: walker for
IfcRelConnectsElements(TOP) relationships
- ifcopenshell.util.space: new module with get_boundary_lines,
get_space_polygon, get_auto_space_height and height detection
helpers — all operating on IFC geometry without Blender
Bonsai's tool/spatial.py now delegates to these utilities via
thin wrappers, keeping only Blender-specific concerns (cache
management with depsgraph invalidation, UI property reads).
tool/wall.py iter_wall_slab_connections delegates to
ifcopenshell.util.element.iter_top_connections.
Added 22 tests: 6 for bisect_mesh_plane_vf, 10 for space
generation algorithms, 4 for iter_top_connections, 2 Bonsai
integration tests for cache behavior.
Generated with the assistance of an AI coding tool.
- assert isinstance(res, list) was wrong because duplicate_task returns a tuple not a list
- removed overkill assertion anyway as the usecase is already typed.
- setting optional name or reuse planned schedule name
- usecase now returns created baseline work schedule
Most of them are actually correct, but they're not enforced in general on the repo, so using them blocks us from flagging `unused-noqa` for rules that we actually do use.
An SI prefix attaches to the base unit symbol and the prefixed symbol is
raised to the power as a whole: DECI CUBIC_METRE is dm3 = a litre = 1e-3 m3,
not 0.1 m3. The scale factor previously applied the prefix multiplier
linearly for all IfcSIUnits, inflating volumes x100 and areas x10 for such
declarations (produced e.g. by MagiCAD for Revit MEP exports).
Following the reviewer note in #9278, the exponent is taken from the
derived attribute IfcSIUnit.Dimensions rather than from substring matching
on the unit name: the multiplier is raised to LengthExponent only when the
unit's dimensions are a pure power of length, so prefixed derived units
(KILO PASCAL, MEGA NEWTON) and non-length units (KILO GRAM) correctly keep
the linear multiplier. This matches the exponent handling already present
in convert() and named_dimensions in the same module.
Adds regression tests for prefixed AREAUNIT/VOLUMEUNIT and for the
linear-prefix behaviour of PRESSUREUNIT/MASSUNIT.
Apply the rename manifest, normalize serializer filenames to the classes they define, and update includes and CMake source lists.
Generated with the assistance of an AI coding tool.
CyrilWaechter