# This file is a part of JuliaFEM. # License is MIT: see https://github.com/JuliaFEM/JuliaFEM.jl/blob/master/LICENSE.md using JuliaFEM using JuliaFEM.Test function test_auxiliary_plane_transforms() nodes = Vector{Float64}[ [0.0, 0.0, 0.0], [1.0, 0.0, 0.0], [0.0, 1.0, 0.0]] e1 = Tri3([1, 2, 3]) # local coordinate system N, T1, T2 in node R = [0.0 1.0 0.0 0.0 0.0 1.0 1.0 0.0 0.0] e1["geometry"] = Vector{Float64}[nodes[1], nodes[2], nodes[3]] e1["normal-tangential coordinates"] = Matrix{Float64}[R, R, R] time::Real = 0.0 x0, Q = create_auxiliary_plane(e1, time) info("x0 = $x0") info("Q = $Q") @test isapprox(x0, [1.0/3.0, 1.0/3.0, 0.0]) @test isapprox(Q, R) p1 = Float64[1.0/3.0+0.1, 1.0/3.0+0.1, 1.0] p2 = project_point_to_auxiliary_plane(p1, x0, Q) info("point in auxiliary plane p2 = $p2") @test isapprox(p2, [0.1, 0.1]) theta = project_point_from_plane_to_surface(p2, x0, Q, e1, time) info("theta = $theta") @test isapprox(theta[1], 0.0) X = e1("geometry", theta[2:3], time) info("projected point = $X") @test isapprox(X, Float64[1.0/3.0+0.1, 1.0/3.0+0.1, 0.0]) end function test_get_edge_intersections() # first case, two triangles S = [ 0.0 0.0; 3.0 0.0; 0.0 3.0]' M = [-1.0 1.0; 2.0 -0.5; 1.0 1.5]' P, n = get_edge_intersections(S, M) P_expected = [ 1.00 1.75 0.00 0.00 0.00 0.00 0.50 1.25] n_expected = [ 1 1 0 0 0 0 1 0 1] @test isapprox(P, P_expected) @test isapprox(n, n_expected) # slave 4 vertices non-convex, master triangle S = [ 0.0 0.0; 2.5 0.0; 1.0 1.0; 0.0 2.0]' M = [-1.0 1.0; 2.0 -0.5; 1.0 1.5]' P, n = get_edge_intersections(S, M) P_expected = [ 1.0 1.75 1.375 0.60 0.00 0.00 0.0 0.00 0.750 1.40 0.50 1.25] n_expected = [ 1 1 0 0 1 0 0 0 1 1 0 1] @test isapprox(P, P_expected) @test isapprox(n, n_expected) # slave 3 triangle, master 4 vertices S = [ 0.0 0.0; 3.0 0.0; 0.0 3.0]' M = [-1.0 1.0; 2.0 -0.5; 1.0 1.5; -1.0 2.0]' P, n = get_edge_intersections(S, M) P_expected = [ 1.00 1.75 0.00 0.00 0.00 0.00 0.50 1.75] n_expected = [ 1 1 0 0 0 0 0 0 1 0 1 0] @test isapprox(P, P_expected) @test isapprox(n, n_expected) end function test_get_points_inside_triangle() S = [0.0 0.0; 3.0 0.0; 0.0 3.0]' pts = [-1.0 1.0; 2.0 -0.5; 1.0 1.5; 0.5 1.5]' P = get_points_inside_triangle(S, pts) @test isapprox(P, [1.0 1.5; 0.5 1.5]') end function test_is_point_inside_convex_polygon() X = Vector{Float64}[[0.0, 0.0], [1.0, 0.0], [1.0, 1.0], [0.0, 1.0]] @test is_point_inside_convex_polygon([0.5, 0.5], X) == true @test is_point_inside_convex_polygon([1.0, 0.5], X) == true @test is_point_inside_convex_polygon([1.1, 0.5], X) == false @test is_point_inside_convex_polygon([1.0, 1.0], X) == true @test is_point_inside_convex_polygon([0.0, 0.3], X) == true @test is_point_inside_convex_polygon([0.0, -0.000001], X) == false end function test_polygon_clipping_easy() S = [0 0; 3 0; 0 3]' M = [-1 1; 2 -1/2; 2 2]' P, n = clip_polygon(S, M) @test isapprox(P, [0.0 0.5; 1.0 0.0; 2.0 0.0; 2.0 1.0; 1.25 1.75; 0.0 4/3]') @test isapprox(n, [1 0 1; 1 1 0; 0 1 1]) end function test_polygon_clipping_no_clip() # no clipping at all S = [-0.125 0.125 0.125 -0.125 -0.125 -0.125 0.125 0.125] M = [-0.291667 -0.625 -0.625 -0.291667 -0.208333 -0.208333 0.125 0.125 ] P, n = clip_polygon(S, M) # FIXME: check better. @test isa(P, Void) @test isa(n, Void) end function test_calculate_polygon_centerpoint() P = [ 0.0 1.0 2.0 2.0 1.25 0.0 0.5 0.0 0.0 1.0 1.75 1.33333] C = calculate_polygon_centerpoint(P) info("Polygon centerpoint: $C") @test isapprox(C, [1.0397440690338993, 0.8047003412233396]) end function test_assemble_3d_problem_tri3() nodes = Vector{Float64}[ [0.0, 0.0, 0.0], [1.0, 0.0, 0.0], [0.0, 1.0, 0.0], [0.0, 0.0, 0.1], [1.0, 0.0, 0.1], [0.0, 1.0, 0.1]] mel = Tri3([4, 5, 6]) mel["geometry"] = Vector{Float64}[nodes[4], nodes[5], nodes[6]] sel = Tri3([1, 2, 3]) sel["geometry"] = Vector{Float64}[nodes[1], nodes[2], nodes[3]] # Rv = [0.0 1.0 0.0 # 0.0 0.0 1.0 # 1.0 0.0 0.0] # sel["normal-tangential coordinates"] = Matrix{Float64}[Rv, Rv, Rv] calculate_normal_tangential_coordinates!(sel, 0.0) sel["master elements"] = Element[mel] prob = MortarProblem("temperature", 1) push!(prob, sel) stiffness_matrix = full(assemble(prob, 0.0).stiffness_matrix) info("stiffness matrix for this problem:\n$stiffness_matrix") M = D = 1/24*[2 1 1; 1 2 1; 1 1 2] B = [D -M] # slave dofs are first in this. info("expected matrix for this problem:\n$B") @test isapprox(stiffness_matrix, B) # rotate and translate surface and check that we are still having same results Rx(t) = [ 1.0 0.0 0.0 0.0 cos(t) -sin(t) 0.0 sin(t) cos(t)] Ry(t) = [ cos(t) 0.0 sin(t) 0.0 1.0 0.0 -sin(t) 0.0 cos(t) ] Rz(t) = [ cos(t) -sin(t) 0.0 sin(t) cos(t) 0.0 0.0 0.0 1.0] T = [1.0, 1.0, 1.0] tx = pi/3.0 ty = pi/4.0 tz = pi/5.0 for node in nodes node[:] = Rz(tz)*Ry(ty)*Rx(tx)*node + T end calculate_normal_tangential_coordinates!(sel, 0.0) stiffness_matrix = full(assemble(prob, 0.0).stiffness_matrix) info("sel midpnt: ", sel("geometry", [1/3, 1/3], 0.0)) info("nt basis: ", sel("normal-tangential coordinates", [1/3, 1/3], 0.0)) @test isapprox(stiffness_matrix, B) end function test_assemble_3d_problem_quad4() info("assemble 3d problem in quad4-quad4") nodes = Vector{Float64}[ [0.0, 0.0, 0.0], [1.0, 0.0, 0.0], [1.0, 1.0, 0.0], [0.0, 1.0, 0.0], [0.0, 0.0, 0.1], [2.0, 0.0, 0.1], [2.0, 2.0, 0.1], [0.0, 2.0, 0.1]] mel = Quad4([5, 6, 7, 8]) mel["geometry"] = Vector{Float64}[nodes[5], nodes[6], nodes[7], nodes[8]] sel = Quad4([1, 2, 3, 4]) sel["geometry"] = Vector{Float64}[nodes[1], nodes[2], nodes[3], nodes[4]] calculate_normal_tangential_coordinates!(sel, 0.0) sel["master elements"] = Element[mel] prob = MortarProblem("temperature", 1) push!(prob, sel) stiffness_matrix = full(assemble(prob, 0.0).stiffness_matrix)*144 D = [16 8 4 8; 8 16 8 4; 4 8 16 8; 8 4 8 16] M = [25 5 1 5; 20 10 2 4; 16 8 4 8; 20 4 2 10] B = [D -M] # slave dofs are first in this. info("expected matrix for this problem:") dump(round(B, 3)) info("stiffness matrix for this problem:") dump(round(stiffness_matrix, 3)) @test isapprox(stiffness_matrix, B) end function test_assemble_3d_problem_quad4_2() info("assemble 3d problem in quad4-quad4") nodes = Vector{Float64}[ [0.0, 0.0, 0.0], [1/4, 0.0, 0.0], [1/4, 1/4, 0.0], [0.0, 1/4, 0.0], [0.0, 0.0, 0.0], [1/3, 0.0, 0.0], [1/3, 1/3, 0.0], [0.0, 1/3, 0.0]] mel = Quad4([5, 6, 7, 8]) mel["geometry"] = Vector{Float64}[nodes[5], nodes[6], nodes[7], nodes[8]] sel = Quad4([1, 2, 3, 4]) sel["geometry"] = Vector{Float64}[nodes[1], nodes[2], nodes[3], nodes[4]] calculate_normal_tangential_coordinates!(sel, 0.0) sel["master elements"] = Element[mel] prob = MortarProblem("temperature", 1) push!(prob, sel) stiffness_matrix = full(assemble(prob, 0.0).stiffness_matrix)*589824 D = [ 4096 2048 1024 2048 2048 4096 2048 1024 1024 2048 4096 2048 2048 1024 2048 4096 ] M = [ 5184 1728 576 1728 3456 3456 1152 1152 2304 2304 2304 2304 3456 1152 1152 3456 ] B = [D -M] # slave dofs are first in this. info("expected matrix for this problem:") dump(round(B, 3)) info("stiffness matrix for this problem:") dump(round(stiffness_matrix, 3)) @test isapprox(stiffness_matrix, B) end function test_assemble_3d_problem_quad4_3() info("assemble 3d problem in quad4-quad4") a = 1/4 b = 1/3 nodes = Vector{Float64}[ [2*a, a, 0], [3*a, a, 0], [3*a, 2*a, 0], [2*a, 2*a, 0], [ b, 0, 0], [2*b, 0, 0], [2*b, b, 0], [ b, b, 0]] mel = Quad4([5, 6, 7, 8]) mel["geometry"] = Vector{Float64}[nodes[5], nodes[6], nodes[7], nodes[8]] sel = Quad4([1, 2, 3, 4]) sel["geometry"] = Vector{Float64}[nodes[1], nodes[2], nodes[3], nodes[4]] calculate_normal_tangential_coordinates!(sel, 0.0) sel["master elements"] = Element[mel] prob = MortarProblem("temperature", 1) push!(prob, sel) stiffness_matrix = full(assemble(prob, 0.0).stiffness_matrix)*186624*9 D = [ 7904 3040 560 1456 3040 2432 448 560 560 448 128 160 1456 560 160 416 ] M = [ 504 1224 7956 3276 144 720 4680 936 18 90 990 198 63 153 1683 693 ] B = [D -M] # slave dofs are first in this. info("expected matrix for this problem:") dump(round(B, 3)) info("stiffness matrix for this problem:") dump(round(stiffness_matrix, 3)) @test isapprox(stiffness_matrix, B) end function test_3d_problem() nodes = Vector{Float64}[ [0.0, 0.0, 0.0], [1.0, 0.0, 0.0], [1.0, 1.0, 0.0], [0.0, 1.0, 0.0], [0.0, 0.0, 0.5], [1.0, 0.0, 0.5], [1.0, 1.0, 0.5], [0.0, 1.0, 0.5], [0.0, 0.0, 0.5], [1.0, 0.0, 0.5], [1.0, 1.0, 0.5], [0.0, 1.0, 0.5], [0.0, 0.0, 1.0], [1.0, 0.0, 1.0], [1.0, 1.0, 1.0], [0.0, 1.0, 1.0], ] el1 = Hex8([1, 2, 3, 4, 5, 6, 7, 8]) el2 = Hex8([9, 10, 11, 12, 13, 14, 15, 16]) sym121 = Quad4([1, 2, 3, 4]) sym131 = Quad4([1, 2, 6, 5]) sym132 = Quad4([9, 10, 14, 13]) sym231 = Quad4([4, 1, 5, 8]) sym232 = Quad4([12, 9, 13, 16]) force = Quad4([14, 15, 16, 13]) l2u = Quad4([5, 6, 7, 8]) u2l = Quad4([9, 10, 11, 12]) elements = Element[el1, el2, sym121, sym131, sym132, sym231, sym232, force, l2u, u2l] update!(elements, "geometry", nodes) el1["youngs modulus"] = el2["youngs modulus"] = 900.0 el1["poissons ratio"] = el2["poissons ratio"] = 0.25 sym121["displacement 3"] = 0.0 sym131["displacement 2"] = sym132["displacement 2"] = 0.0 sym231["displacement 1"] = sym232["displacement 1"] = 0.0 force["displacement traction force 3"] = -100.0 l2u["master elements"] = Element[u2l] calculate_normal_tangential_coordinates!(l2u, 0.0) fb = LinearElasticityProblem("two elastic blocks") push!(fb, el1, el2, force) bc = DirichletProblem("symmetry boundaries", "displacement", 3) push!(bc, sym121, sym131, sym132, sym231, sym232) tie = MortarProblem("tie contact between bodies", "displacement", 3) push!(tie, l2u) solver = DirectSolver("solution of elasticity problem") push!(solver, fb) push!(solver, bc) push!(solver, tie) solver.nonlinear_problem = false solver.method = :UMFPACK call(solver, 0.0) X = el2("geometry", [1.0, 1.0, 1.0], 0.0) u = el2("displacement", [1.0, 1.0, 1.0], 0.0) info("displacement at $X = $u") @test isapprox(u, 1/36*[1, 1, -4]) end #= @testset "plane quad4 projector tests" begin a = 1/2 b = 1/3 nodes = Dict{Int64, Vector{Float64}}( 1 => [0.0, 0.0, 0.0], 2 => [1/2, 0.0, 0.0], 3 => [1.0, 0.0, 0.0], 4 => [0.0, 1.0, 0.0], 5 => [1/2, 1.0, 0.0], 6 => [1.0, 1.0, 0.0], 7 => [0.0, 0.0, 0.0], 8 => [1/3, 0.0, 0.0], 9 => [2/3, 0.0, 0.0], 10 => [1.0, 0.0, 0.0], 11 => [0.0, 1/2, 0.0], 12 => [1/3, 1/2, 0.0], 13 => [2/3, 1/2, 0.0], 14 => [1.0, 1/2, 0.0], 15 => [0.0, 1.0, 0.0], 16 => [1/3, 1.0, 0.0], 17 => [2/3, 1.0, 0.0], 18 => [1.0, 1.0, 0.0], ) sel1 = Quad4([1, 2, 5, 4]) sel2 = Quad4([2, 3, 6, 5]) mel1 = Quad4([7, 8, 12, 11]) mel2 = Quad4([8, 9, 13, 12]) mel3 = Quad4([9, 10, 14, 13]) mel4 = Quad4([11, 12, 16, 15]) mel5 = Quad4([12, 13, 17, 16]) mel6 = Quad4([13, 14, 18, 17]) update(Element[sel1, sel2, mel1, mel2, mel3, mel4, mel5, mel6], "geometry", nodes) calculate_normal_tangential_coordinates!(sel1, 0.0) calculate_normal_tangential_coordinates!(sel2, 0.0) prob = MortarProblem("temperature", 1) push!(prob, sel1) push!(prob, sel2) sel1["master elements"] = [mel1, mel2, mel4, mel5] sel2["master elements"] = [mel2, mel3, mel5, mel6] stiffness_matrix = full(assemble(prob, 0.0).stiffness_matrix)*2592*6 info("interface matrix:") dump(round(stiffness_matrix, 3)) B = [ 864 432 0 432 216 0 -420 -375 -15 0 -504 -450 -18 0 -84 -75 -3 0 432 1728 432 216 864 216 -120 -690 -690 -120 -144 -828 -828 -144 -24 -138 -138 -24 0 432 864 0 216 432 0 -15 -375 -420 0 -18 -450 -504 0 -3 -75 -84 432 216 0 864 432 0 -84 -75 -3 0 -504 -450 -18 0 -420 -375 -15 0 216 864 216 432 1728 432 -24 -138 -138 -24 -144 -828 -828 -144 -120 -690 -690 -120 0 216 432 0 432 864 0 -3 -75 -84 0 -18 -450 -504 0 -15 -375 -420 ] info("expected interface matrix:") dump(round(B, 3)) @test isapprox(stiffness_matrix, B) end =# #= TODO: Fix test. @testset "plane quad4 projector master 3x3 slave 2x2" begin a = 1/2 b = 1/3 nodes = Dict{Int64, Vector{Float64}}( 1 => [0*a, 0*a, 0.0], 2 => [1*a, 0*a, 0.0], 3 => [2*a, 0*a, 0.0], 4 => [0*a, 1*a, 0.0], 5 => [1*a, 1*a, 0.0], 6 => [2*a, 1*a, 0.0], 7 => [0*a, 2*a, 0.0], 8 => [1*a, 2*a, 0.0], 9 => [2*a, 2*a, 0.0], 10 => [0*b, 0*b, 0.0], 11 => [1*b, 0*b, 0.0], 12 => [2*b, 0*b, 0.0], 13 => [3*b, 0*b, 0.0], 14 => [0*b, 1*b, 0.0], 15 => [1*b, 1*b, 0.0], 16 => [2*b, 1*b, 0.0], 17 => [3*b, 1*b, 0.0], 18 => [0*b, 2*b, 0.0], 19 => [1*b, 2*b, 0.0], 20 => [2*b, 2*b, 0.0], 21 => [3*b, 2*b, 0.0], 22 => [0*b, 3*b, 0.0], 23 => [1*b, 3*b, 0.0], 24 => [2*b, 3*b, 0.0], 25 => [3*b, 3*b, 0.0], ) sel1 = Quad4([1, 2, 5, 4]) sel2 = Quad4([2, 3, 6, 5]) sel3 = Quad4([4, 5, 8, 7]) sel4 = Quad4([5, 6, 9, 8]) mel1 = Quad4([10, 11, 15, 14]) mel2 = Quad4([11, 12, 16, 15]) mel3 = Quad4([12, 13, 17, 16]) mel4 = Quad4([14, 15, 19, 18]) mel5 = Quad4([15, 16, 20, 19]) mel6 = Quad4([16, 17, 21, 20]) mel7 = Quad4([18, 19, 23, 22]) mel8 = Quad4([19, 20, 24, 23]) mel9 = Quad4([20, 21, 25, 24]) update!(Element[sel1, sel2, sel3, sel4, mel1, mel2, mel3, mel4, mel5, mel6, mel7, mel8, mel9], "geometry", nodes) calculate_normal_tangential_coordinates!(sel1, 0.0) calculate_normal_tangential_coordinates!(sel2, 0.0) calculate_normal_tangential_coordinates!(sel3, 0.0) calculate_normal_tangential_coordinates!(sel4, 0.0) prob = MortarProblem("temperature", 1) push!(prob, sel1) push!(prob, sel2) push!(prob, sel3) push!(prob, sel4) master_elements = [mel1, mel2, mel3, mel4, mel5, mel6, mel7, mel8, mel9] sel1["master elements"] = master_elements sel2["master elements"] = master_elements sel3["master elements"] = master_elements sel4["master elements"] = master_elements B = sparse(assemble(prob, 0.0).stiffness_matrix, 25, 25)*46656 B = full(B) D = B[1:9,1:9] M = B[1:9,10:end] info("interface matrix D:") dump(round(D, 3)) info("interface matrix M:") dump(round(M, 3)) D_expected = [ 1296 648 0 648 324 0 0 0 0 648 2592 648 324 1296 324 0 0 0 0 648 1296 0 324 648 0 0 0 648 324 0 2592 1296 0 648 324 0 324 1296 324 1296 5184 1296 324 1296 324 0 324 648 0 1296 2592 0 324 648 0 0 0 648 324 0 1296 648 0 0 0 0 324 1296 324 648 2592 648 0 0 0 0 324 648 0 648 1296] M_expected = [ -784 -700 -28 0 -700 -625 -25 0 -28 -25 -1 0 0 0 0 0 -224 -1288 -1288 -224 -200 -1150 -1150 -200 -8 -46 -46 -8 0 0 0 0 0 -28 -700 -784 0 -25 -625 -700 0 -1 -25 -28 0 0 0 0 -224 -200 -8 0 -1288 -1150 -46 0 -1288 -1150 -46 0 -224 -200 -8 0 -64 -368 -368 -64 -368 -2116 -2116 -368 -368 -2116 -2116 -368 -64 -368 -368 -64 0 -8 -200 -224 0 -46 -1150 -1288 0 -46 -1150 -1288 0 -8 -200 -224 0 0 0 0 -28 -25 -1 0 -700 -625 -25 0 -784 -700 -28 0 0 0 0 0 -8 -46 -46 -8 -200 -1150 -1150 -200 -224 -1288 -1288 -224 0 0 0 0 0 -1 -25 -28 0 -25 -625 -700 0 -28 -700 -784] info("D - D_expected") dump(D - D_expected) info("M - M_expected") dump(M - M_expected) @test isapprox(D, D_expected) @test isapprox(M, M_expected) #= B = [ 864 432 0 432 216 0 -420 -375 -15 0 -504 -450 -18 0 -84 -75 -3 0 432 1728 432 216 864 216 -120 -690 -690 -120 -144 -828 -828 -144 -24 -138 -138 -24 0 432 864 0 216 432 0 -15 -375 -420 0 -18 -450 -504 0 -3 -75 -84 432 216 0 864 432 0 -84 -75 -3 0 -504 -450 -18 0 -420 -375 -15 0 216 864 216 432 1728 432 -24 -138 -138 -24 -144 -828 -828 -144 -120 -690 -690 -120 0 216 432 0 432 864 0 -3 -75 -84 0 -18 -450 -504 0 -15 -375 -420 ] info("expected interface matrix:") dump(round(B, 3)) @test isapprox(stiffness_matrix, B) =# end =#