added Revit 2022 SDK minus except *rvt and *rfa

SDK/Samples/MoveLinear/CS/AssemblyInfo.cs

@@ -0,0 +1,80 @@
+//
+// (C) Copyright 2003-2019 by Autodesk, Inc.
+//
+// Permission to use, copy, modify, and distribute this software in
+// object code form for any purpose and without fee is hereby granted,
+// provided that the above copyright notice appears in all copies and
+// that both that copyright notice and the limited warranty and
+// restricted rights notice below appear in all supporting
+// documentation.
+//
+// AUTODESK PROVIDES THIS PROGRAM "AS IS" AND WITH ALL FAULTS.
+// AUTODESK SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF
+// MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. AUTODESK, INC.
+// DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE
+// UNINTERRUPTED OR ERROR FREE.
+//
+// Use, duplication, or disclosure by the U.S. Government is subject to
+// restrictions set forth in FAR 52.227-19 (Commercial Computer
+// Software - Restricted Rights) and DFAR 252.227-7013(c)(1)(ii)
+// (Rights in Technical Data and Computer Software), as applicable.
+// 
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("Copyright © Autodesk, Inc. 2009")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]        
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

SDK/Samples/MoveLinear/CS/Command.cs

@@ -0,0 +1,140 @@
+//
+// (C) Copyright 2003-2019 by Autodesk, Inc.
+//
+// Permission to use, copy, modify, and distribute this software in
+// object code form for any purpose and without fee is hereby granted,
+// provided that the above copyright notice appears in all copies and
+// that both that copyright notice and the limited warranty and
+// restricted rights notice below appear in all supporting
+// documentation.
+//
+// AUTODESK PROVIDES THIS PROGRAM "AS IS" AND WITH ALL FAULTS.
+// AUTODESK SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF
+// MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. AUTODESK, INC.
+// DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE
+// UNINTERRUPTED OR ERROR FREE.
+//
+// Use, duplication, or disclosure by the U.S. Government is subject to
+// restrictions set forth in FAR 52.227-19 (Commercial Computer
+// Software - Restricted Rights) and DFAR 252.227-7013(c)(1)(ii)
+// (Rights in Technical Data and Computer Software), as applicable.
+//  
+
+using System;
+using System.Windows.Forms;
+using Autodesk.Revit;
+using Autodesk.Revit.DB;
+using Autodesk.Revit.UI;
+
+namespace Revit.SDK.Samples.MoveLinear.CS
+{
+    /// <summary>
+    /// Implements the Revit add-in interface IExternalCommand
+    /// </summary>
+    [Autodesk.Revit.Attributes.Transaction(Autodesk.Revit.Attributes.TransactionMode.Manual)]
+    [Autodesk.Revit.Attributes.Regeneration(Autodesk.Revit.Attributes.RegenerationOption.Manual)]
+    [Autodesk.Revit.Attributes.Journaling(Autodesk.Revit.Attributes.JournalingMode.NoCommandData)]
+    public class Command : Autodesk.Revit.UI.IExternalCommand
+    {
+        #region IExternalCommand Members Implementation
+        /// <summary>
+        /// Implement this method as an external command for Revit.
+        /// </summary>
+        /// <param name="cmdData">An object that is passed to the external application 
+        /// which contains data related to the command, 
+        /// such as the application object and active view.</param>
+        /// <param name="msg">A message that can be set by the external application 
+        /// which will be displayed if a failure or cancellation is returned by 
+        /// the external command.</param>
+        /// <param name="eleSet">A set of elements to which the external application 
+        /// can add elements that are to be highlighted in case of failure or cancellation.</param>
+        /// <returns>Return the status of the external command. 
+        /// A result of Succeeded means that the API external method functioned as expected. 
+        /// Cancelled can be used to signify that the user cancelled the external operation 
+        /// at some point. Failure should be returned if the application is unable to proceed with 
+        /// the operation.</returns>
+        public Autodesk.Revit.UI.Result Execute(ExternalCommandData cmdData, ref string msg, ElementSet eleSet)
+        {
+            Autodesk.Revit.UI.Result res = Autodesk.Revit.UI.Result.Succeeded;
+            Transaction trans = new Transaction(cmdData.Application.ActiveUIDocument.Document, "Revit.SDK.Samples.MoveLinear");
+            trans.Start();
+            try
+            {
+                System.Collections.IEnumerator iter;
+                Autodesk.Revit.UI.Selection.Selection sel;
+                sel = cmdData.Application.ActiveUIDocument.Selection;
+
+                ElementSet elemSet;
+                elemSet = new ElementSet();
+                foreach (ElementId elementId in sel.GetElementIds())
+                {
+                   elemSet.Insert(cmdData.Application.ActiveUIDocument.Document.GetElement(elementId));
+                }
+
+                //Check whether user has selected only one element
+                if (0 == elemSet.Size)
+                {
+                    TaskDialog.Show("MoveLinear", "Please select an element");
+                    trans.Commit();
+                    return res;
+                }
+
+                if (1 < elemSet.Size)
+                {
+                    TaskDialog.Show("MoveLinear", "Please select only one element");
+                    trans.Commit();
+                    return res;
+                }
+
+                iter = elemSet.ForwardIterator();
+
+                iter.MoveNext();
+                Autodesk.Revit.DB.Element element;
+
+                element = (Autodesk.Revit.DB.Element)iter.Current;
+
+                if (element != null)
+                {
+                    Autodesk.Revit.DB.LocationCurve lineLoc;
+                    lineLoc = element.Location as LocationCurve;
+
+                    if (null == lineLoc)
+                    {
+                        TaskDialog.Show("MoveLinear", "Please select an element which based on a Line");
+                        trans.Commit();
+                        return res;
+                    }
+
+                    Autodesk.Revit.DB.Line line;
+                    //get start point via "get_EndPoint(0)"
+                    Autodesk.Revit.DB.XYZ newStart = new XYZ(
+                        lineLoc.Curve.GetEndPoint(0).X + 100,
+                        lineLoc.Curve.GetEndPoint(0).Y,
+                        lineLoc.Curve.GetEndPoint(0).Z);
+                    //get end point via "get_EndPoint(1)"
+                    Autodesk.Revit.DB.XYZ newEnd = new XYZ(
+                        lineLoc.Curve.GetEndPoint(1).X,
+                        lineLoc.Curve.GetEndPoint(1).Y + 100,
+                        lineLoc.Curve.GetEndPoint(1).Z);
+
+
+                    //get a new line and use it to move current element 
+                    //with property "Autodesk.Revit.DB.LocationCurve.Curve"
+                    line = Line.CreateBound(newStart, newEnd);
+                    lineLoc.Curve = line;
+                }
+            }
+            catch (Exception ex)
+            {
+                TaskDialog.Show("MoveLinear", ex.Message);
+                res = Autodesk.Revit.UI.Result.Failed;
+            }
+            finally
+            {
+            }
+            trans.Commit();
+            return res;
+        }
+        #endregion IExternalCommand Members Implementation
+    }
+}

SDK/Samples/MoveLinear/CS/MoveLinear.addin

@@ -0,0 +1,13 @@
+<?xml version="1.0" encoding="utf-8"?>
+<RevitAddIns>
+  <AddIn Type="Command">
+    <Assembly>MoveLinear.dll</Assembly>
+    <ClientId>597af169-06b1-4420-9388-14e0898ed26f</ClientId>
+    <FullClassName>Revit.SDK.Samples.MoveLinear.CS.Command</FullClassName>
+    <Text>Move Linear</Text>
+    <Description>Move a linear element, such as a structural beam.</Description>
+    <VisibilityMode>AlwaysVisible</VisibilityMode>
+    <VendorId>ADSK</VendorId>
+    <VendorDescription>Autodesk, www.autodesk.com</VendorDescription>
+  </AddIn>
+</RevitAddIns>

SDK/Samples/MoveLinear/CS/MoveLinear.csproj

@@ -0,0 +1,152 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <ProjectType>Local</ProjectType>
+    <ProductVersion>9.0.30729</ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{E33970AA-7837-4C5A-BAE0-A43D46E6F19B}</ProjectGuid>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ApplicationIcon>
+    </ApplicationIcon>
+    <AssemblyKeyContainerName>
+    </AssemblyKeyContainerName>
+    <AssemblyName>MoveLinear</AssemblyName>
+    <AssemblyOriginatorKeyFile>
+    </AssemblyOriginatorKeyFile>
+    <DefaultClientScript>JScript</DefaultClientScript>
+    <DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
+    <DefaultTargetSchema>IE50</DefaultTargetSchema>
+    <DelaySign>false</DelaySign>
+    <OutputType>Library</OutputType>
+    <RootNamespace>MoveLinear</RootNamespace>
+    <StartupObject>
+    </StartupObject>
+    <FileUpgradeFlags>
+    </FileUpgradeFlags>
+    <UpgradeBackupLocation>
+    </UpgradeBackupLocation>
+    <PublishUrl>publish\</PublishUrl>
+    <Install>true</Install>
+    <InstallFrom>Disk</InstallFrom>
+    <UpdateEnabled>false</UpdateEnabled>
+    <UpdateMode>Foreground</UpdateMode>
+    <UpdateInterval>7</UpdateInterval>
+    <UpdateIntervalUnits>Days</UpdateIntervalUnits>
+    <UpdatePeriodically>false</UpdatePeriodically>
+    <UpdateRequired>false</UpdateRequired>
+    <MapFileExtensions>true</MapFileExtensions>
+    <ApplicationVersion>1.0.0.%2a</ApplicationVersion>
+    <IsWebBootstrapper>false</IsWebBootstrapper>
+    <BootstrapperEnabled>true</BootstrapperEnabled>
+    <TargetFrameworkVersion>v4.8</TargetFrameworkVersion>
+    <TargetFrameworkProfile />
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <OutputPath>bin\Debug\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>true</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <Optimize>false</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>full</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <OutputPath>bin\Release\</OutputPath>
+    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
+    <BaseAddress>285212672</BaseAddress>
+    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
+    <ConfigurationOverrideFile>
+    </ConfigurationOverrideFile>
+    <DefineConstants>TRACE</DefineConstants>
+    <DocumentationFile>
+    </DocumentationFile>
+    <DebugSymbols>false</DebugSymbols>
+    <FileAlignment>4096</FileAlignment>
+    <Optimize>true</Optimize>
+    <RegisterForComInterop>false</RegisterForComInterop>
+    <RemoveIntegerChecks>false</RemoveIntegerChecks>
+    <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
+    <WarningLevel>4</WarningLevel>
+    <DebugType>none</DebugType>
+    <ErrorReport>prompt</ErrorReport>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x64'">
+    <DebugSymbols>true</DebugSymbols>
+    <OutputPath>bin\x64\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <BaseAddress>285212672</BaseAddress>
+    <FileAlignment>4096</FileAlignment>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x64</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x64'">
+    <OutputPath>bin\x64\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <BaseAddress>285212672</BaseAddress>
+    <Optimize>true</Optimize>
+    <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
+    <FileAlignment>4096</FileAlignment>
+    <PlatformTarget>x64</PlatformTarget>
+    <ErrorReport>prompt</ErrorReport>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <PropertyGroup>
+    <RunPostBuildEvent>OnOutputUpdated</RunPostBuildEvent>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System">
+      <Name>System</Name>
+    </Reference>
+    <Reference Include="System.Data">
+      <Name>System.Data</Name>
+    </Reference>
+    <Reference Include="System.Windows.Forms">
+      <Name>System.Windows.Forms</Name>
+    </Reference>
+    <Reference Include="System.XML">
+      <Name>System.XML</Name>
+    </Reference>
+    <Reference Include="System.Core">
+      <RequiredTargetFramework>3.5</RequiredTargetFramework>
+    </Reference>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="Command.cs">
+      <SubType>Code</SubType>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <BootstrapperPackage Include="Microsoft.Net.Framework.2.0">
+      <Visible>False</Visible>
+      <ProductName>.NET Framework 2.0</ProductName>
+      <Install>true</Install>
+    </BootstrapperPackage>
+  </ItemGroup>
+  <Import Project="$(SolutionDir)VSProps\SDKSamples.targets" />
+  <PropertyGroup>
+    <PreBuildEvent>
+    </PreBuildEvent>
+    <PostBuildEvent>set FILEFORSAMPLEREG="$(SolutionDir)..\..\..\..\Regression\API\SDKSamples\UpdateSampleDllForRegression.pl"
+if exist %25FILEFORSAMPLEREG%25 perl %25FILEFORSAMPLEREG%25 $(ProjectExt) "$(ProjectPath)" "$(TargetPath)" "$(SolutionDir)"</PostBuildEvent>
+  </PropertyGroup>
+  <PropertyGroup>
+    <ResolveAssemblyWarnOrErrorOnTargetArchitectureMismatch>None</ResolveAssemblyWarnOrErrorOnTargetArchitectureMismatch>
+  </PropertyGroup>
+</Project>