added Revit 2022 SDK minus except *rvt and *rfa

2026-09-18 10:31:32 +00:00 · 2021-04-20 11:36:21 +02:00
parent 1133a82dc5
commit 7e327986e8
3034 changed files with 1245318 additions and 0 deletions
@@ -0,0 +1,280 @@
+//
+// (C) Copyright 2003-2019 by Autodesk, Inc.
+//
+// Permission to use, copy, modify, and distribute this software in
+// object code form for any purpose and without fee is hereby granted,
+// provided that the above copyright notice appears in all copies and
+// that both that copyright notice and the limited warranty and
+// restricted rights notice below appear in all supporting
+// documentation.
+//
+// AUTODESK PROVIDES THIS PROGRAM "AS IS" AND WITH ALL FAULTS.
+// AUTODESK SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF
+// MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. AUTODESK, INC.
+// DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE
+// UNINTERRUPTED OR ERROR FREE.
+//
+// Use, duplication, or disclosure by the U.S. Government is subject to
+// restrictions set forth in FAR 52.227-19 (Commercial Computer
+// Software - Restricted Rights) and DFAR 252.227-7013(c)(1)(ii)
+// (Rights in Technical Data and Computer Software), as applicable.
+//
+
+
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+using Autodesk.Revit.DB;
+
+namespace Revit.SDK.Samples.Reinforcement.CS
+{
+    #region Struct Definition
+
+    /// <summary>
+    /// a struct to store the geometry information of the rebar
+    /// </summary>
+    public struct RebarGeometry
+    {
+        // Private members
+        Autodesk.Revit.DB.XYZ m_normal;        // the direction of rebar distribution
+        IList<Curve> m_curves; //the profile of the rebar
+        int m_number;        //the number of the rebar
+        double m_spacing;    //the spacing of the rebar
+
+        /// <summary>
+        /// get and set the value of the normal
+        /// </summary>
+        public Autodesk.Revit.DB.XYZ Normal
+        {
+            get
+            {
+                return m_normal;
+            }
+            set
+            {
+                m_normal = value;
+            }
+        }
+
+        /// <summary>
+        /// get and set the value of curve array
+        /// </summary>
+        public IList<Curve> Curves
+        {
+            get
+            {
+                return m_curves;
+            }
+            set
+            {
+                m_curves = value;
+            }
+        }
+
+        /// <summary>
+        /// get and set the number of the rebar
+        /// </summary>
+        public int RebarNumber
+        {
+            get
+            {
+                return m_number;
+            }
+            set
+            {
+                m_number = value;
+            }
+        }
+
+        /// <summary>
+        /// get and set the value of the rebar spacing 
+        /// </summary>
+        public double RebarSpacing
+        {
+            get
+            {
+                return m_spacing;
+            }
+            set
+            {
+                m_spacing = value;
+            }
+        }
+
+        /// <summary>
+        /// consturctor
+        /// </summary>
+        /// <param name="normal">the normal information</param>
+        /// <param name="curves">the profile of the rebars</param>
+        /// <param name="number">the number of the rebar</param>
+        /// <param name="spacing">the number of the rebar</param>
+        public RebarGeometry(Autodesk.Revit.DB.XYZ normal, IList<Curve> curves, int number, double spacing)
+        {
+            // initialize the data members
+            m_normal = normal;
+            m_curves = curves;
+            m_number = number;
+            m_spacing = spacing;
+        }
+    }
+
+    /// <summary>
+    /// A struct to store the const data which support beam reinforcement creation
+    /// </summary>
+    public struct BeamRebarData
+    {
+        /// <summary>
+        /// offset value of the top end rebar
+        /// </summary>
+        public const double TopEndOffset = 0.2;
+
+        /// <summary>
+        ///offset value of the top center rebar 
+        /// </summary>
+        public const double TopCenterOffset = 0.23;
+
+        /// <summary>
+        /// offset value of the transverse rebar
+        /// </summary>
+        public const double TransverseOffset = 0.125;
+
+        /// <summary>
+        /// offset value of the end transverse rebar
+        /// </summary>
+        public const double TransverseEndOffset = 1.2;
+
+        /// <summary>
+        /// the spacing value between end and center transvers rebar
+        /// </summary>
+        public const double TransverseSpaceBetween = 1;
+
+        /// <summary>
+        ///offset value of bottom rebar 
+        /// </summary>
+        public const double BottomOffset = 0.271;
+
+        /// <summary>
+        /// number of bottom rebar
+        /// </summary>
+        public const int BottomRebarNumber = 5;
+
+        /// <summary>
+        /// number of top rebar
+        /// </summary>
+        public const int TopRebarNumber = 2;
+    }
+
+
+    /// <summary>
+    /// A struct to store the const data which support column reinforcement creation
+    /// </summary>
+    public struct ColumnRebarData
+    {
+        /// <summary>
+        /// offset value of transverse rebar
+        /// </summary>
+        public const double TransverseOffset = 0.125;
+ 
+        /// <summary>
+        /// offset value of vertical rebar
+        /// </summary>
+        public const double VerticalOffset = 0.234;
+    }
+
+    #endregion
+
+    #region Enum Definition
+    /// <summary>
+    /// Indicate location of top rebar
+    /// </summary>
+    public enum TopRebarLocation
+    {
+        /// <summary>
+        /// locate start
+        /// </summary>
+        Start,
+
+        /// <summary>
+        /// locate center
+        /// </summary>
+        Center,
+
+        /// <summary>
+        /// locate end
+        /// </summary>
+        End
+    }
+
+    /// <summary>
+    /// Indicate location of transverse rebar
+    /// </summary>
+    public enum TransverseRebarLocation
+    {
+        /// <summary>
+        /// locate start
+        /// </summary>
+        Start,
+
+        /// <summary>
+        /// locate center
+        /// </summary>
+        Center,
+
+        /// <summary>
+        /// locate end
+        /// </summary>
+        End
+    }
+
+    /// <summary>
+    /// Indicate location of vertical rebar
+    /// </summary>
+    public enum VerticalRebarLocation
+    {
+        /// <summary>
+        /// locate north
+        /// </summary>
+        North,
+
+        /// <summary>
+        /// locate east
+        /// </summary>
+        East,
+
+        /// <summary>
+        /// locate south
+        /// </summary>
+        South,
+
+        /// <summary>
+        /// locate west
+        /// </summary>
+        West
+    }
+    #endregion
+
+    /// <summary>
+    /// A comparer for XYZ, and give a method to sort all the Autodesk.Revit.DB.XYZ points in a array
+    /// </summary>
+    public class XYZHeightComparer : IComparer<Autodesk.Revit.DB.XYZ>
+    {
+        int IComparer<Autodesk.Revit.DB.XYZ>.Compare(Autodesk.Revit.DB.XYZ first, Autodesk.Revit.DB.XYZ second)
+        {
+            // first compare z coordinate, then y coordinate, at last x coordinate
+            if (GeomUtil.IsEqual(first.Z, second.Z))
+            {
+                if (GeomUtil.IsEqual(first.Y, second.Y))
+                {
+                    if (GeomUtil.IsEqual(first.X, second.X))
+                    {
+                        return 0;
+                    }
+                    return (first.X > second.X) ? 1 : -1;
+                }
+                return (first.Y > second.Y) ? 1 : -1;
+            }
+            return (first.Z > second.Z) ? 1 : -1;
+        }
+    }
+}