467cf4db27
README.rst -> README.md, we prefer Markdown
2017-08-21 18:00:09 +03:00
64494d2a1f
remove CONTRIBUTING.rst, new contributing guide is in juliafem.org
2017-08-21 18:00:09 +03:00
457dc00879
Add module Abaqus back to code
...
Abaqus module is added back to code into `deprecations.jl` to make
code in seminar paper run on 0.3.3.
2017-08-21 10:05:32 +03:00
35fea30dac
New test for Tet10 mass matrix
2017-08-20 20:51:00 +03:00
4070b309c8
Fix test of zero eigenmodes
...
A better known example.
2017-08-20 20:51:00 +03:00
fe3daae587
Deprecate assemble!(problem, time, Val{:mass_matrix})
...
Use function assemble_mass_matrix!(problem, time)
2017-08-20 20:51:00 +03:00
d01d1ea6e6
Improve performance of mass matrix assembly
...
* Avoid unnecessary memory allocations.
* Decrease integration order.
2017-08-20 20:51:00 +03:00
8f420fbaa5
Increase performance of writing results to Xdmf
2017-08-20 17:03:21 +03:00
923aad6f7c
Calculate displacement gradient using FEMBasis
2017-08-20 14:49:42 +03:00
720d76a4ba
Eliminate Dirichlet boundary conditions differently
...
Slicing is very expensive operation on sparse matrices. Avoid slicing
by calculating matrix product `K_red = C1*K*C1`, where C1 is diagonal
matrix. This should be much cheaper.
2017-08-20 12:13:12 +03:00
ecaf8cb7fc
Use global timer to measure performance
...
This makes syntax a little bit easier. Also, measure more accurately performance
of modal solver under investigation.
2017-08-19 13:30:01 +03:00
0fffdb52ba
Test group_by_element_type
2017-08-19 00:01:47 +03:00
675f787c9a
Preallocate matrices in Elasticity problem
...
Now style is to assemble all same kind/dimension elements at same time
in one function call, so it's possible to allocate all necessary
matrices only one time.
2017-08-18 23:27:26 +03:00
7eba2f782f
New function group_by_element_type
...
Function groups a list of elements to several lists, where each
list contains elements of particular type.
2017-08-18 20:15:45 +03:00
a24a5945a1
Fix deprecation warnings when using Julia 0.6.0
2017-08-18 17:45:52 +03:00
ef66a8f74b
Assemble several elements at a time
...
Now assemble! takes a vector of elements as input. This makes it
possible to preallocate memory for common matrices making code super
fast.
2017-08-17 17:49:39 +03:00
aabcda2e26
Implement new function create_nodal_elements
...
This function can be used to create elements from node set defined
in mesh. Resulting elements are of type Poi1, that is, they don't
have any volume but it's still possible to add boundary conditions
to them which are then enforced in discrete sense.
2017-08-17 15:53:20 +03:00
89af6faad5
Fix test
...
Now both JuliaFEM and JuliaFEM.Preprocess export add_elements! and
it must be spesifically pointed out which one is used in test.
2017-08-16 17:20:55 +03:00
367c4711b3
Implement new function add_elements!
...
Add new elements to the problem.
2017-08-16 17:20:55 +03:00
1966b7f894
Remove functions used rarely
...
A new problem can be defined with 8(!) different styles. Let's remove
the ones not used often.
2017-08-16 16:57:56 +03:00
a6b198b1ab
Templating data type of Field
...
Use template in type Field to make type stabile code. This should fix
problems related to type stability.
2017-08-16 00:00:03 +03:00
ab7a661712
New test
2017-08-15 15:49:50 +03:00
7efa5aa01e
Fix return types for fields not defined
...
Problem arises typically when boundary condition is created using
"nodal" elements of type Poi1, but forget to define geometry and
```solvers("geometry", 0.0)``` fails in Xdmf update function. Fixed.
2017-08-15 15:49:50 +03:00
1505205dcd
use FEMBasis / BasisInfo structure
...
Calculate basic element info using BasisInfo
2017-08-14 21:20:44 +03:00
08055ecd21
add *.mem and *.cov to .gitignore
2017-08-14 20:41:16 +03:00
5357ed88c8
Set up entry point for element assembly
...
From here we can preallocate matrices to improve efficiency of code.
2017-08-14 18:26:37 +03:00
b6b0bc3f55
Change coords field type from Point to Tuple
...
Change to Tuple, Array is allocating memory.
2017-08-14 17:10:02 +03:00
681d53ee9a
Separate problems_elasticity.jl
...
Have separate file problems_elasticity_2d.jl for plane stress, plane
strain, axisymmetric etc. problems.
2017-08-13 22:49:05 +03:00
4939f49760
Remove obsolete code from heat assembly
...
Postprocess-function is deprecated and not used anywhere.
2017-08-13 22:45:11 +03:00
d88dc8742e
Remove needless stuff from postprocess_utils.jl
...
Not needed in core code.
2017-08-13 22:28:13 +03:00
b87952ae14
Add another loop to assembly procedure
...
Yet another loop, but this way we can preallocate matrices when
constructiong local matrices of elements with same dimensions (which is
the case in practice)
2017-08-13 22:16:53 +03:00
a11fafc25b
use TimerOutsputs to measure performance
2017-08-13 14:37:44 +03:00
4d0dbc44a5
add simple usage example
2017-08-05 15:07:56 +03:00
6893ec3fa8
basic doc + @autodoc functions
2017-08-05 15:07:56 +03:00
96714acc18
Add new method to set properties for problem
...
```
update!(body.properties, "a" => "b", "c" => "d")
```
Usage example is shown in
`test_elasticity_2d_linear_with_surface_load.jl`.
2017-08-05 14:42:13 +03:00
0f0c49da62
Cleanup of obsolete files
...
A lot of old files from old documentation systems etc. is in package.
These are now removed or moved. Old notebooks are in docs/tutorials.
This PR closes issue #124 .
2017-08-05 12:08:46 +03:00
3d3e9bb441
Calculate shape functions using FEMBasis.jl
...
A lot of code is moved to FEMBasis.jl regarding
calculating basis / shape functions of finite elements.
* add FEMBasis to REQUIRE
* remove obsolete files
* remove obsolete test files
* make integration point iterable
* loosen type definitions
* get length of element rather from basis than connectivity
* calculate midpoint of reference element
* wrong input argument to eval_basis! fixed
2017-08-05 12:03:05 +03:00
4038c2f0ce
Use @__DIR__ instead of Pkg.dir
...
this allows installing and loading the package from elsewhere
2017-08-05 12:02:00 +03:00
b7880906ee
separate optomechanical experiments to own package
2017-08-04 22:29:25 +03:00
cfba8b62f0
add package dependency AsterReader.jl
2017-08-03 21:06:55 +03:00
ce9b028d26
add package dependency FEMQuad.jl
2017-08-03 20:29:19 +03:00
724196b4a4
AbaqusReader.jl tagged, added to REQUIRE
2017-08-02 01:30:32 +03:00
648bbe2a40
use AsterReader.jl ( #136 )
...
Functions used to read Code Aster file format are now in separate package AsterReader.jl
2017-07-29 13:57:27 +03:00
cbc85ee665
Move Abaqus-related functions to own file ( #137 )
2017-07-29 10:51:19 +03:00
e46c0a1ad4
Use FEMQuad.jl to calculate quadrature rules for elements ( #134 )
2017-07-23 18:42:04 +03:00
ef0897f4b2
Change README link to new CONTRIBUTING.rst ( #132 )
2017-07-22 17:24:10 +03:00
e13d6482ce
Use PkgTestSuite for CI ( #131 )
...
This standardizes the CI process between JuliaFEM packages
2017-07-21 16:28:03 +03:00
2af7e0e1bb
move cloning of AbaqusReader.jl from .travis to build/deps.jl ( #130 )
2017-07-21 15:57:46 +03:00
e97f9b070a
REQUIRE: change julia 0.5 -> 0.6 ( #129 )
2017-07-21 11:08:17 +03:00
a666bb4bd8
Use package AbaqusReader.jl ( #127 )
...
Source code related to read and parse ABAQUS .inp files is now living in
it's own repository `AbaqusReader.jl` and in this commit we cleanup the
same files from this repository.
- add AbaqusReader to .travis.yml because it's not registered package yet
- initialize Mesh from AbaqusReader.jl dict
- remove ABAQUS tests and files moved to AbaqusReader.jl
- remove references to old module Abaqus
- move ABAQUS code to preprocess.jl (what is left)
- close issue #122
- close issue #55
2017-07-21 00:40:52 +03:00
Jukka Aho