closes #6235 - Add copy toggle to CAD offset

Add a "Copy" option to bim.cad_offset. When enabled (the
default) it offsets a new copy of the selected edges as
before; when disabled it moves the existing edges to the
offset location instead. The toggle is exposed in the CAD
tool's Offset panel and the operator redo panel.

Generated with the assistance of an AI coding tool.

.github/workflows/ci-ifcwrap-standalone.yml

@@ -1,155 +0,0 @@
-# This file was generated with the assistance of an AI coding tool.
-name: ci-ifcwrap-standalone
-
-on:
-  workflow_dispatch:
-  pull_request:
-    paths:
-      - ".github/workflows/ci-ifcwrap-standalone.yml"
-      - "cmake/**"
-      - "src/ifcwrap/**"
-      - "src/ifcparse/**"
-      - "src/ifcgeom/**"
-      - "src/serializers/**"
-      - "src/ifcconvert/**"
-      - "src/ifcopenshell-python/**"
-      - "src/svgfill/**"
-  push:
-    paths:
-      - ".github/workflows/ci-ifcwrap-standalone.yml"
-      - "cmake/**"
-      - "src/ifcwrap/**"
-      - "src/ifcparse/**"
-      - "src/ifcgeom/**"
-      - "src/serializers/**"
-      - "src/ifcconvert/**"
-      - "src/ifcopenshell-python/**"
-      - "src/svgfill/**"
-
-env:
-  IFCOPENSHELL_PREFIX: ${{ github.workspace }}/ifcopenshell-install
-
-jobs:
-  build-ifcopenshell:
-    runs-on: ubuntu-22.04
-
-    steps:
-      - uses: actions/checkout@v6
-        with:
-          submodules: recursive
-
-      - name: Install C++ dependencies
-        run: |
-          sudo apt update
-          sudo apt-get install --no-install-recommends -y \
-            cmake \
-            gcc \
-            g++ \
-            libboost-date-time-dev \
-            libboost-filesystem-dev \
-            libboost-iostreams-dev \
-            libboost-program-options-dev \
-            libboost-regex-dev \
-            libboost-system-dev \
-            libboost-thread-dev \
-            libeigen3-dev \
-            libocct-data-exchange-dev \
-            libocct-draw-dev \
-            libocct-foundation-dev \
-            libocct-modeling-algorithms-dev \
-            libocct-modeling-data-dev \
-            libocct-ocaf-dev \
-            libocct-visualization-dev \
-            libpcre3-dev \
-            libtbb-dev \
-            libxml2-dev \
-            libxi-dev \
-            occt-misc \
-            tcl-dev \
-            tk-dev \
-            swig
-
-      - name: Configure minimal IfcOpenShell
-        run: |
-          cmake -S cmake -B build-ifcopenshell \
-            -DCMAKE_BUILD_TYPE=Release \
-            -DCMAKE_INSTALL_PREFIX="${IFCOPENSHELL_PREFIX}" \
-            -DCMAKE_PREFIX_PATH=/usr \
-            -DCMAKE_SYSTEM_PREFIX_PATH=/usr \
-            -DMINIMAL_BUILD=ON \
-            -DBUILD_IFCPYTHON=OFF \
-            "-DSCHEMA_VERSIONS=4x3_add2"
-
-      - name: Build and install minimal IfcOpenShell
-        run: |
-          cmake --build build-ifcopenshell --target install -j "$(nproc)"
-
-      - name: Set up Python 3.11
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.11
-
-      - name: Install Python import dependencies
-        run: |
-          python -m pip install --upgrade pip
-          python -m pip install numpy typing_extensions
-
-      - name: Configure standalone IfcPython
-        run: |
-          PYTHON_EXECUTABLE="$(python -c 'import sys; print(sys.executable)')"
-          PYTHON_INCLUDE_DIR="$(python -c 'import sysconfig; print(sysconfig.get_path("include"))')"
-
-          cmake -S src/ifcwrap -B "build-ifcwrap-311" \
-            -DCMAKE_BUILD_TYPE=Release \
-            -DCMAKE_PREFIX_PATH="${IFCOPENSHELL_PREFIX};/usr" \
-            -DPython_EXECUTABLE:FILEPATH="${PYTHON_EXECUTABLE}" \
-            -DPython_INCLUDE_DIR:PATH="${PYTHON_INCLUDE_DIR}" \
-            -DPYTHON_EXECUTABLE:FILEPATH="${PYTHON_EXECUTABLE}" \
-            -DPYTHON_INCLUDE_DIR:PATH="${PYTHON_INCLUDE_DIR}"
-
-      - name: Build and install standalone IfcPython
-        run: |
-          cmake --build "build-ifcwrap-311" --target install -j "$(nproc)"
-
-      - name: Import installed IfcPython
-        run: |
-          PYTHONPATH="${RUNNER_TEMP}/ifcopenshell-python" python - <<'PY'
-          import ifcopenshell
-
-          print("IfcOpenShell import ok:", ifcopenshell.version)
-          PY
-
-      - name: Set up Python 3.12
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.12
-
-      - name: Install Python import dependencies
-        run: |
-          python -m pip install --upgrade pip
-          python -m pip install numpy typing_extensions
-
-      - name: Configure standalone IfcPython
-        run: |
-          PYTHON_EXECUTABLE="$(python -c 'import sys; print(sys.executable)')"
-          PYTHON_INCLUDE_DIR="$(python -c 'import sysconfig; print(sysconfig.get_path("include"))')"
-
-          cmake -S src/ifcwrap -B "build-ifcwrap-312" \
-            -DCMAKE_BUILD_TYPE=Release \
-            -DCMAKE_PREFIX_PATH="${IFCOPENSHELL_PREFIX};/usr" \
-            -DPython_EXECUTABLE:FILEPATH="${PYTHON_EXECUTABLE}" \
-            -DPython_INCLUDE_DIR:PATH="${PYTHON_INCLUDE_DIR}" \
-            -DPYTHON_EXECUTABLE:FILEPATH="${PYTHON_EXECUTABLE}" \
-            -DPYTHON_INCLUDE_DIR:PATH="${PYTHON_INCLUDE_DIR}"
-
-      - name: Build and install standalone IfcPython
-        run: |
-          cmake --build "build-ifcwrap-312" --target install -j "$(nproc)"
-
-      - name: Import installed IfcPython
-        run: |
-          PYTHONPATH="${RUNNER_TEMP}/ifcopenshell-python" python - <<'PY'
-          import ifcopenshell
-
-          print("IfcOpenShell import ok:", ifcopenshell.version)
-          PY

.github/workflows/ci.yml

@@ -10,13 +10,9 @@ on:
       - 'src/ifcgeomserver/**'
       - 'src/ifcjni/**'
       - 'src/ifcmax/**'
-      - 'src/ifc5d/**'
-      - 'src/ifcedit/**'
-      - 'src/ifcmcp/**'
       - 'src/ifcopenshell-python/**'
       - '!src/ifcopenshell-python/docs/**'
       - 'src/ifcparse/**'
-      - 'src/ifcquery/**'
       - 'src/ifcwrap/**'
       - 'src/qtviewer/**'
       - 'src/svgfill/**'
@@ -55,7 +51,7 @@ jobs:
       - name: Install dependencies
         run: |
           python -m pip install --upgrade pip
-          pip install xmlschema xsdata numpy lxml pytest isodate lark networkx tabulate python-dateutil shapely pyparsing psutil
+          pip install xmlschema xsdata numpy lxml pytest isodate lark networkx tabulate python-dateutil shapely pyparsing
           pip install src/bcf --no-deps
           pip install pytest-xdist==3.8.0
 
@@ -256,26 +252,13 @@ jobs:
           pip install deepdiff
           cd ../ifcdiff && make test || ERROR=1
           cd ../ifcpatch && make test || ERROR=1
-          pip install -e ../ifc5d --no-deps
-          pip install odfpy xlsxwriter
-          cd ../ifc5d && make test || ERROR=1
-          pip install -e ../ifcquery --no-deps
-          cd ../ifcquery && make test || ERROR=1
-          pip install -e ../ifcedit --no-deps
-          cd ../ifcedit && make test || ERROR=1
-          pip install mcp
-          pip install -e ../ifcmcp --no-deps
-          cd ../ifcmcp && make test || ERROR=1
           pip install -e ../ifctester --no-deps
           cd ../ifctester && make test || ERROR=1
           make build-ids-docs || ERROR=1
           # Run mathutils related tests at the end to ensure no other code is relying on mathutils.
-          # mathutils only has pre-built wheels for Python 3.13+; skip on older versions.
           cd ../ifcopenshell-python
-          if python -c "import sys; sys.exit(0 if sys.version_info >= (3, 13) else 1)"; then
-            pip install mathutils
-            make test-mathutils || ERROR=1
-          fi
+          pip install mathutils
+          make test-mathutils || ERROR=1
           if [ $ERROR -ne 0 ]; then
             echo "One or more tests failed";
             exit 1;

.gitignore

@@ -4,8 +4,6 @@
 /_deps-vs*-x*-installed/
 /_installed-vs*-x*/
 /build/
-/build.log
-/output/
 /src/examples/build/
 # ifctester docs output
 /src/ifctester/test/build/
@@ -30,7 +28,6 @@ venv
 !.vscode/launch.json
 !.vscode/tasks.json
 .vs
-/*.code-workspace
 
 # PyCharm files
 .idea
@@ -129,7 +126,5 @@ src/ifcopenshell-python/ifcopenshell/express/*.exp.cache.dat
 
 # temp files from AI coding tools
 *.claude
-CLAUDE.local.md
 *.py.tmp*
 *.json.tmp*
-

cmake/CMakeLists.txt

@@ -27,14 +27,13 @@ endif()
 set(CMAKE_CXX_STANDARD_REQUIRED ON) # not necessary, but encouraged
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
 
-# The VERSION file in the repository root is the single source of truth for the
-# release version. Read it unconditionally so a plain source build reports the
-# real version through buildinfo.cpp instead of the stale hardcoded 0.8.0
-# fallback (see #8164). VERSION_OVERRIDE still controls the branch name used
-# when ADD_COMMIT_SHA embeds a commit sha.
-file(READ "../VERSION" "RELEASE_VERSION_")
-string(STRIP "${RELEASE_VERSION_}" RELEASE_VERSION)
-message(STATUS "Detected version '${RELEASE_VERSION}'")
+if(VERSION_OVERRIDE)
+    file(READ "../VERSION" "RELEASE_VERSION_")
+    string(STRIP "${RELEASE_VERSION_}" RELEASE_VERSION)
+    message(STATUS "Detected version '${RELEASE_VERSION}'")
+else()
+    set(RELEASE_VERSION "0.8.0")
+endif()
 
 add_definitions(-D_DISABLE_CONSTEXPR_MUTEX_CONSTRUCTOR)
 
@@ -314,12 +313,8 @@ if(WASM_BUILD)
 else()
     # @todo review this, shouldn't this be all possible header-only now?
     # ... or rewritten using C++17 features?
-    # Boost.System has been header-only since 1.69 and its compiled stub library
-    # was dropped in newer Boost, so requesting it as a component makes
-    # find_package fail on Boost 1.70 and up (for example Boost 1.90). It is
-    # still pulled in transitively by thread / iostreams where needed, so do not
-    # request it explicitly.
     set(BOOST_COMPONENTS
+        system
         program_options
         regex
         thread
@@ -665,11 +660,6 @@ if(ADD_COMMIT_SHA)
     endif()
 endif(ADD_COMMIT_SHA)
 
-# Always expose the release version (from the VERSION file) to buildinfo.cpp so
-# that a build without commit-sha info reports the correct version instead of a
-# stale hardcoded fallback. See #8164.
-target_compile_definitions(IfcParse PRIVATE IFCOPENSHELL_VERSION_STRING=${RELEASE_VERSION})
-
 if(MSVC)
     # @todo still needs to be understood better, but the cgal and cgal-simple kernel cause multiply defined boost lambda placeholders _1 ... _3
     set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /FORCE:MULTIPLE")

cmake/FindIfcOpenShell.cmake

@@ -1,131 +0,0 @@
-# This file was generated with the assistance of an AI coding tool.
-################################################################################
-#                                                                              #
-# This file is part of IfcOpenShell.                                           #
-#                                                                              #
-# IfcOpenShell is free software: you can redistribute it and/or modify         #
-# it under the terms of the Lesser GNU General Public License as published by  #
-# the Free Software Foundation, either version 3.0 of the License, or          #
-# (at your option) any later version.                                          #
-#                                                                              #
-# IfcOpenShell is distributed in the hope that it will be useful,              #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of               #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the                 #
-# Lesser GNU General Public License for more details.                          #
-#                                                                              #
-# You should have received a copy of the Lesser GNU General Public License     #
-# along with this program. If not, see <http://www.gnu.org/licenses/>.         #
-#                                                                              #
-################################################################################
-
-include("${CMAKE_CURRENT_LIST_DIR}/utilities.cmake" OPTIONAL)
-
-set(_IfcOpenShell_find_args)
-if(IfcOpenShell_FIND_VERSION)
-    list(APPEND _IfcOpenShell_find_args "${IfcOpenShell_FIND_VERSION}")
-    if(IfcOpenShell_FIND_VERSION_EXACT)
-        list(APPEND _IfcOpenShell_find_args EXACT)
-    endif()
-endif()
-list(APPEND _IfcOpenShell_find_args CONFIG QUIET)
-if(IfcOpenShell_FIND_COMPONENTS)
-    list(APPEND _IfcOpenShell_find_args COMPONENTS ${IfcOpenShell_FIND_COMPONENTS})
-endif()
-
-set(_IfcOpenShell_saved_module_path "${CMAKE_MODULE_PATH}")
-list(REMOVE_ITEM CMAKE_MODULE_PATH "${CMAKE_CURRENT_LIST_DIR}")
-find_package(IfcOpenShell ${_IfcOpenShell_find_args})
-set(CMAKE_MODULE_PATH "${_IfcOpenShell_saved_module_path}")
-
-if(NOT IfcOpenShell_FOUND)
-    set(_IfcOpenShell_error "Could not find an IfcOpenShell CMake config package. Set IfcOpenShell_DIR or CMAKE_PREFIX_PATH.")
-    if(IfcOpenShell_FIND_REQUIRED)
-        message(FATAL_ERROR "${_IfcOpenShell_error}")
-    elseif(NOT IfcOpenShell_FIND_QUIETLY)
-        message(STATUS "${_IfcOpenShell_error}")
-    endif()
-    return()
-endif()
-
-set(_IfcOpenShell_required_targets IfcOpenShell::IfcParse IfcOpenShell::IfcGeom)
-set(_IfcOpenShell_missing_targets "")
-foreach(_IfcOpenShell_target IN LISTS _IfcOpenShell_required_targets)
-    if(NOT TARGET ${_IfcOpenShell_target})
-        list(APPEND _IfcOpenShell_missing_targets ${_IfcOpenShell_target})
-    endif()
-endforeach()
-
-if(_IfcOpenShell_missing_targets)
-    set(IfcOpenShell_FOUND FALSE)
-    string(REPLACE ";" ", " _IfcOpenShell_missing_targets_text "${_IfcOpenShell_missing_targets}")
-    set(_IfcOpenShell_error "IfcOpenShell config was found, but required targets are missing: ${_IfcOpenShell_missing_targets_text}.")
-    if(IfcOpenShell_FIND_REQUIRED)
-        message(FATAL_ERROR "${_IfcOpenShell_error}")
-    elseif(NOT IfcOpenShell_FIND_QUIETLY)
-        message(STATUS "${_IfcOpenShell_error}")
-    endif()
-    return()
-endif()
-
-if(NOT DEFINED IFCOPENSHELL_WITH_OPENCASCADE)
-    set(IFCOPENSHELL_WITH_OPENCASCADE OFF)
-    if(TARGET IfcOpenShell::geometry_kernel_opencascade)
-        set(IFCOPENSHELL_WITH_OPENCASCADE ON)
-    endif()
-endif()
-
-if(NOT DEFINED IFCOPENSHELL_WITH_CGAL)
-    set(IFCOPENSHELL_WITH_CGAL OFF)
-    if(TARGET IfcOpenShell::IFCOPENSHELL_CGAL)
-        set(IFCOPENSHELL_WITH_CGAL ON)
-    endif()
-endif()
-
-if(NOT DEFINED IFCOPENSHELL_IFCXML)
-    set(IFCOPENSHELL_IFCXML OFF)
-endif()
-
-if(NOT DEFINED IFCOPENSHELL_WITH_ROCKSDB)
-    set(IFCOPENSHELL_WITH_ROCKSDB OFF)
-endif()
-
-set(IFCOPENSHELL_LIBRARIES IfcOpenShell::IfcParse)
-foreach(_IfcOpenShell_target IN ITEMS IfcOpenShell::geometry_serializer IfcOpenShell::Serializers)
-    if(TARGET ${_IfcOpenShell_target})
-        list(APPEND IFCOPENSHELL_LIBRARIES ${_IfcOpenShell_target})
-    endif()
-endforeach()
-
-set(IFCOPENSHELL_KERNEL_LIBRARIES "")
-foreach(_IfcOpenShell_target IN ITEMS
-    IfcOpenShell::geometry_kernel_opencascade
-    IfcOpenShell::geometry_kernel_cgal
-    IfcOpenShell::geometry_kernel_cgal_simple
-)
-    if(TARGET ${_IfcOpenShell_target})
-        list(APPEND IFCOPENSHELL_KERNEL_LIBRARIES ${_IfcOpenShell_target})
-    endif()
-endforeach()
-
-set(IFCOPENSHELL_GEOMETRY_LIBRARIES IfcOpenShell::IfcGeom ${IFCOPENSHELL_KERNEL_LIBRARIES})
-
-if(TARGET IfcOpenShell::OpenCASCADE_INTERFACE)
-    set(OpenCASCADE_LIBRARIES IfcOpenShell::OpenCASCADE_INTERFACE)
-endif()
-
-if(TARGET IfcOpenShell::IFCOPENSHELL_CGAL)
-    set(CGAL_LIBRARIES IfcOpenShell::IFCOPENSHELL_CGAL)
-endif()
-
-if(TARGET IfcOpenShell::svgfill)
-    set(IFCOPENSHELL_SVGFILL_LIBRARY IfcOpenShell::svgfill)
-endif()
-
-mark_as_advanced(IfcOpenShell_DIR)
-
-unset(_IfcOpenShell_error)
-unset(_IfcOpenShell_find_args)
-unset(_IfcOpenShell_missing_targets)
-unset(_IfcOpenShell_missing_targets_text)
-unset(_IfcOpenShell_required_targets)
-unset(_IfcOpenShell_target)

cmake/IfcOpenShellConfig.cmake.in

@@ -7,26 +7,12 @@ set(IFCOPENSHELL_WITH_OPENCASCADE @WITH_OPENCASCADE@)
 set(IFCOPENSHELL_WITH_CGAL @WITH_CGAL@)
 set(IFCOPENSHELL_IFCXML @IFCXML_SUPPORT@)
 set(IFCOPENSHELL_WITH_ROCKSDB @WITH_ROCKSDB@)
-set(IFCOPENSHELL_COLLADA_SUPPORT @COLLADA_SUPPORT@)
-set(IFCOPENSHELL_GLTF_SUPPORT @GLTF_SUPPORT@)
-set(IFCOPENSHELL_HDF5_SUPPORT @HDF5_SUPPORT@)
-set(IFCOPENSHELL_WITH_PROJ @WITH_PROJ@)
-set(IFCOPENSHELL_USD_SUPPORT @USD_SUPPORT@)
 
 include(CMakeFindDependencyMacro)
 
-set(IFCOPENSHELL_BOOST_USE_STATIC_LIBS "@Boost_USE_STATIC_LIBS@")
-set(IFCOPENSHELL_BOOST_USE_STATIC_RUNTIME "@Boost_USE_STATIC_RUNTIME@")
-set(IFCOPENSHELL_BOOST_USE_MULTITHREADED "@Boost_USE_MULTITHREADED@")
-if(NOT "${IFCOPENSHELL_BOOST_USE_STATIC_LIBS}" STREQUAL "")
-    set(Boost_USE_STATIC_LIBS ${IFCOPENSHELL_BOOST_USE_STATIC_LIBS})
-endif()
-if(NOT "${IFCOPENSHELL_BOOST_USE_STATIC_RUNTIME}" STREQUAL "")
-    set(Boost_USE_STATIC_RUNTIME ${IFCOPENSHELL_BOOST_USE_STATIC_RUNTIME})
-endif()
-if(NOT "${IFCOPENSHELL_BOOST_USE_MULTITHREADED}" STREQUAL "")
-    set(Boost_USE_MULTITHREADED ${IFCOPENSHELL_BOOST_USE_MULTITHREADED})
-endif()
+set(Boost_USE_STATIC_LIBS ON)
+set(Boost_USE_STATIC_RUNTIME OFF)
+set(Boost_USE_MULTITHREADED ON)
 set(Boost_COMPONENTS
     system
     program_options
@@ -57,33 +43,13 @@ if(IFCOPENSHELL_WITH_ROCKSDB)
 endif()
 
 if(IFCOPENSHELL_IFCXML)
-    find_dependency(LibXml2)
+    find_dependency(LibXml2 CONFIG)
 endif()
 
 if(IFCOPENSHELL_WITH_CGAL)
     find_dependency(CGAL CONFIG)
 endif()
 
-if(IFCOPENSHELL_COLLADA_SUPPORT)
-    find_dependency(OpenCOLLADA)
-endif()
-
-if(IFCOPENSHELL_GLTF_SUPPORT)
-    find_dependency(nlohmann_json CONFIG)
-endif()
-
-if(IFCOPENSHELL_HDF5_SUPPORT)
-    find_dependency(HDF5 COMPONENTS C CXX)
-endif()
-
-if(IFCOPENSHELL_WITH_PROJ)
-    find_dependency(PROJ)
-endif()
-
-if(IFCOPENSHELL_USD_SUPPORT)
-    find_dependency(USD)
-endif()
-
 if(IFCOPENSHELL_WITH_OPENCASCADE)
     find_dependency(OpenCASCADE CONFIG)
     if(OpenCASCADE_VERSION VERSION_LESS "7.7.0")

docker/.dockerignore

@@ -1,3 +0,0 @@
-.env
-*.pyc
-__pycache__

docker/.gitignore

@@ -1,3 +0,0 @@
-.env
-*.pyc
-__pycache__

docker/.ifcos_env

@@ -1,21 +0,0 @@
-#!/usr/bin/env bash
-# .ifcos_env
-# register autocompletes. just source the file in your shell, i.e. 
-# source .ifcos_env
-
-.ifcos_env() {
-    local cur prev opts
-    COMPREPLY=()
-    cur="${COMP_WORDS[COMP_CWORD]}"
-    prev="${COMP_WORDS[COMP_CWORD-1]}"
-
-    opts="create update up down restart build attach logs ps config remove help"
-
-    # Basic static completion
-    COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
-
-    return 0
-}
-
-# Register the completion for the command "ifcos_env"
-complete -F .ifcos_env ./ifcos_env

docker/Dockerfile

@@ -1,67 +0,0 @@
-FROM rockylinux:9
-
-# Update system, enable CRB (needed by some EPEL packages) and install EPEL,
-# then install required packages + some common tools for a bit of command
-# line comfort. Combined into one layer so a later `create` always installs
-# against packages from the same dnf update, rather than layering fresh
-# installs on top of a stale cached "update" layer.
-RUN dnf update -y && \
-    dnf install -y epel-release && \
-    dnf config-manager --set-enabled crb && \
-    dnf install -y --allowerasing --setopt=install_weak_deps=False --setopt=tsflags=nodocs \
-                   bash-completion vim git curl wget which tree htop sudo   \
-                   gcc gcc-c++ autoconf automake bison make zip cmake      \
-                   python3 python3-pip                                    \
-                   bzip2 patch mesa-libGL-devel libffi-devel fontconfig-devel \
-                   sqlite-devel bzip2-devel zlib-devel openssl-devel xz-devel \
-                   readline-devel ncurses-devel libuuid-devel git-lfs      \
-                   findutils xz byacc ccache && \
-    git lfs install --system && \
-    dnf clean all && \
-    rm -rf /var/cache/dnf
-
-# Trust bind-mounted repos regardless of which user (root or builder) or host
-# UID owns them, rather than a per-user config that only one of them sees.
-RUN git config --system --add safe.directory '*'
-
-# Configure ccache. CCACHE_MAXSIZE (not `ccache -M`) because /ccache is a
-# volume mount point at runtime - anything `ccache -M` writes to a config
-# file under it during this build gets shadowed once the real volume is
-# mounted, so the size cap only actually takes effect via the env var.
-# 2G is generous: a full build (IfcParse+IfcGeom+IfcConvert+wrapper, one
-# Python version) measures ~300MB, and the volume is now shared across all
-# checkouts (see compose.yaml), so this covers several diverging branches.
-ENV CCACHE_DIR=/ccache
-ENV CCACHE_MAXSIZE=2G
-ENV PATH="/usr/lib/ccache:$PATH"
-
-# Non-root user matching the host UID/GID that bind-mounts the repo (default
-# 1000:1000, the common single-user-Linux-box case), so files the build
-# creates under the mount keep sane, non-root ownership on the host side.
-# Override with --build-arg USER_UID=$(id -u) --build-arg USER_GID=$(id -g)
-# if your host user has a different UID/GID.
-ARG USER_UID=1000
-ARG USER_GID=1000
-# groupadd fails outright if USER_GID is already taken by an existing
-# system group - which happens whenever a host's primary GID collides with
-# one baked into the rockylinux9 base image. The main real-world case is
-# macOS, where the default user's primary group is "staff" at GID 20, and
-# GID 20 is "games" on RHEL-family images. Only create the "builder" group
-# when that GID is actually free; otherwise useradd just attaches to
-# whichever group already owns it. Either way the builder user ends up
-# with the right GID for bind-mount ownership, which is all that matters.
-RUN (getent group "${USER_GID}" >/dev/null || groupadd -g "${USER_GID}" builder) \
-    && useradd -m -u "${USER_UID}" -g "${USER_GID}" -s /bin/bash builder \
-    && echo "builder ALL=(ALL) NOPASSWD:ALL" > /etc/sudoers.d/builder
-
-# Copied while still root: /bin is not writable by the builder user.
-COPY --from=ghcr.io/astral-sh/uv:0.11.27 /uv /uvx /bin/
-
-USER builder
-WORKDIR /__w/IfcOpenShell/IfcOpenShell
-
-# Installed as builder so managed Python interpreters land under builder's
-# $HOME, matching the user that actually runs the build.
-RUN uv python install
-
-CMD ["sleep", "infinity"]

docker/README.md

@@ -1,78 +0,0 @@
-Docker build environment
-========================
-
-This is a small utility to make it easy to compile a perfect `_ifcopenshell_wrapper.cpython-*-x86_64-linux-gnu.so`
-files.
-
-The reason for this tool is that I was trying to follow the web page directions, and my build was behaving differently
-to the release builds. Eventually I concluded that the differences between toolchains on the RHEL based rocky9 image
-and Ubuntu were just too great. Getting the build setup was already a lot of trial and error, so I thought I'd spend
-more time trying to reuse the github actions that perform the build, using a utility called `act`. I learnt a lot, in
-particular how much time, energy, and bandwidth Github waste. I also realised I was most of the way to a regular docker
-setup anyway, so I might as well just do that. So I've deconstructed all the github action steps, and turned it into
-a local docker build environment that uses the exact same base, tools, libraries, and build command/flags etc.
-
-Right now a Github action will:
-- launch the rocky9 base
-- upgrade all the packages
-- install a bunch of extra tools
-- do a recursive checkout of your repo
-- checkout the build repository
-- unpack dependencies
-- run the build script, making all python versions (5? right now I think)
-- create the .zip release files
-
-And it does _all_ of that _every_ time. This is not a fault of the action writers - it's just how Github seems to work.
-
-These dockers tools do the following differently, and it's actually a bit more powerful too:
-- build the base image once.
-- update the packages once.
-- install the extra tools once.
-- the repository is the one on your host, that gets bind mounted in the container as the working directory.
-- by adding an environment variable to .env, restricts to compiling for just a single python version.
-- when the build is finished the created files are right there under your local repositry (but not added to git) for
-  ease of access
-- each repository can have it's own build environment container.
-- the image is shared between those environments.
-- the containers share the ccache, so additional envs should get a helping hand.
-- it has a simple set of user friendly commands to drive it all.
-
-For example:
-``` bash
-# To see the commands (a superset of docker compose commands)
-./ifcos_env
-
-# Enable autocomplete of commands
-source .ifcos_env
-
-# First time commands
-./ifcos_env create
-./ifcos_env up
-./ifcos_env build
-
-# install and test library
-# find an issue
-# edit code
-./ifcos_env build
-
-# and so on. When done stop and optionally delete the container
-./ifcos_env stop
-./ifcos_env remove
-```
-
-To limit the build to one python version just add
-``` bash
-PY_TGT=py-311
-```
-or whichever version your Blender requires.
-
-You might see UNIQUE_ID in the .env file too. This keeps containers for separate folders, separate.
-
-System requirements
-1. Linux-x64 only at this time.
-2. Docker and docker-compose need to be installed.
-3. Have a good amount of disk space. (image is in /var (typically the root partition) and will be about 1.7 GB)
-4. The build action will create about 10GB in your repository folder. Make sure this partition is spacious
-   particularly if you intent on having multiple clones building.
-5. ... I think that covers most of it.
-

docker/SKILL.md

@@ -1,186 +0,0 @@
----
-name: ifcopenshell-docker-build
-description: >-
-  Build a real ifcopenshell_wrapper (.so + .py) and IfcConvert locally via
-  the docker/ifcos_env toolchain, then wire them into a checkout for
-  running C++-dependent parts of the test suite (geometry, the SWIG
-  wrapper stub, the C++ parser). Use whenever a task needs to compile
-  IfcOpenShell's C++ core rather than just read/patch source - e.g.
-  reproducing or fixing a bug in src/ifcgeom, src/ifcparse, src/ifcwrap,
-  or validating util/scripts/validate_stub.py against the actual
-  generated wrapper.
----
-
-# Building IfcOpenShell locally with docker/ifcos_env
-
-`docker/` mirrors the project's GitHub Actions build environment locally,
-in a persistent, non-root container with ccache so repeat builds are fast.
-See `docker/README.md` for the design rationale. Pure-Python changes don't
-need any of this - only reach for it when you need a real compiled
-`_ifcopenshell_wrapper*.so` or `IfcConvert` binary.
-
-## Placement
-
-This `docker/` folder must live as a direct child of the repo root you want
-to build (sibling of `src/`, `cmake/`, etc.) - `compose.yaml` and
-`ifcos_env` resolve the repo via `../` relative to wherever `docker/`
-itself sits, and bind-mount it into the container. If you're setting this
-up in a fresh clone, copy the whole `docker/` directory there first.
-
-## Setup
-
-```bash
-cd docker
-./ifcos_env create   # build the image (shared by name across all your clones/checkouts, so usually instant after the first time anywhere)
-./ifcos_env up        # create + start the container, clone/unpack the third-party dependency cache (~10GB, one-time per container)
-./ifcos_env build     # full build: all deps + IfcParse + IfcGeom + IfcConvert + the Python wrapper, for one Python version
-```
-
-`PY_TGT` and `UNIQUE_ID` live in `docker/.env` - `PY_TGT` (e.g. `py-311`)
-restricts the build to one Python version instead of building five;
-`UNIQUE_ID` is a hash of the folder path, recalculated on every `up`, so
-each checkout gets its own container/volumes automatically.
-
-A full first build takes ~1.5 hours (mostly compiling IfcOpenShell's own
-C++, not the cached third-party deps). After that, ccache makes incremental
-rebuilds of a couple of touched `.cpp` files **under a minute**.
-
-## Container lifecycle
-
-The container is long-lived (`sleep infinity`) so exec'd commands and
-ccache state persist between builds. Commands map directly onto Docker
-Compose's own container-vs-image distinction:
-
-```bash
-./ifcos_env up         # create the container if it doesn't exist, then start it (runs ready_repo too)
-./ifcos_env stop       # stop the container, keep it around
-./ifcos_env start      # start it back up (same container, same filesystem layer)
-./ifcos_env restart    # stop, then start
-./ifcos_env down       # remove the container (and its network) entirely
-./ifcos_env recreate   # down, then up - a fresh container
-```
-
-Named volumes (`ccache`) and the bind-mounted repo/`build/` are unaffected
-by `down`/`recreate` - only the container itself goes away, and `up`
-recreates it from the image.
-
-## Fast iteration
-
-Pass a target to `build` to skip the parts you don't need:
-
-```bash
-./ifcos_env build IfcConvert           # only the executables (IfcConvert, IfcGeomServer) - skips the Python wrapper entirely
-./ifcos_env build IfcOpenShell-Python  # only the SWIG Python wrapper - skips executables entirely
-./ifcos_env build                      # no target = everything (needed the first time, or after touching shared headers)
-```
-
-Use this to keep the edit -> rebuild -> test loop fast when debugging: if
-you're only touching `src/ifcgeom/`, build `IfcConvert`; if you're only
-exercising the Python API, build `IfcOpenShell-Python`.
-
-## Where the artifacts land
-
-Build output goes to `<repo_root>/build/Linux/x86_64/install/` on the host
-(bind-mounted, not just inside the container), owned by you (see
-"Container user" below):
-
-- `ifcopenshell/bin/IfcConvert` - the CLI binary
-- `python-<version>/lib/python<X.Y>/site-packages/ifcopenshell/_ifcopenshell_wrapper*.so`
-  and `ifcopenshell_wrapper.py` - the compiled wrapper + its generated
-  Python glue
-
-## Testing against a checkout (automated / AI-driven)
-
-`_ifcopenshell_wrapper*.so` and `ifcopenshell_wrapper.py` are already
-gitignored under `src/ifcopenshell-python/ifcopenshell/`, which is exactly
-where a normal in-tree build would put them - copy the two files there:
-
-```bash
-SRC=build/Linux/x86_64/install/python-3.11.8/lib/python3.11/site-packages/ifcopenshell
-cp "$SRC/_ifcopenshell_wrapper.cpython-311-x86_64-linux-gnu.so" src/ifcopenshell-python/ifcopenshell/
-cp "$SRC/ifcopenshell_wrapper.py" src/ifcopenshell-python/ifcopenshell/
-```
-
-Then, to run the test suite against it:
-
-```bash
-export PATH="$PWD/build/Linux/x86_64/install/ifcopenshell/bin:$PATH"   # for IfcConvert-dependent tests
-cd src/ifcopenshell-python/test
-PYTHONPATH="$PWD/.." python3.11 -m pytest -p no:pytest-blender .
-```
-
-(`-p no:pytest-blender` avoids the pytest-blender plugin trying to find a
-`blender` executable and failing collection entirely, even for non-Blender
-tests.) You'll need the matching Python version's `pip install`s too
-(numpy, shapely, isodate, lark, tabulate, pytest, ... - whatever the
-modules under test import) since this is a bare interpreter, not the
-project's pixi env.
-
-**This is the pattern to use for automated or AI-driven verification.**
-Don't use `try` (below) for that - it overwrites files in a real, live
-Blender installation, which isn't something an automated/AI workflow
-should ever do without the human explicitly asking for it in the moment.
-
-## Testing in Blender itself (human only)
-
-`try` copies the built wrapper straight into your actual Blender/Bonsai
-extension install, for manual in-Blender testing:
-
-```bash
-./ifcos_env try
-```
-
-It reads `BLENDER_USER_RESOURCE` from `.env` - set this to wherever
-Blender's user resource folder for the Bonsai extension actually lives on
-your system, which depends on your own Blender setup:
-
-```bash
-# in docker/.env
-BLENDER_USER_RESOURCE=~/.config/blender/bonsai/
-```
-
-`try` figures out the built Python version from `build/.../install/`
-(disambiguating with `PY_TGT` if more than one version was built) and
-copies the wrapper to
-`$BLENDER_USER_RESOURCE/extensions/.local/lib/python<X.Y>/site-packages/ifcopenshell/`.
-
-## Container user
-
-The image runs as a non-root `builder` user, UID/GID matching your host
-account (passed as `--build-arg` by `create` from `id -u`/`id -g`, so it
-adjusts automatically - no manual flag needed even if you're not 1000:1000).
-Files the build creates under the bind mount come out owned by you, not
-root. Passwordless `sudo` is available inside the container (e.g. via
-`attach`) for the rare case you need root for something ad hoc.
-
-If you're picking up an existing checkout that was previously built with
-an older, root-based image, you may hit `Permission denied` the first time
-you run `up`/`build` under the new image - `build/`, `.git/modules/`, the
-`ccache` volume, `output/`, and `build.log` can all be left root-owned from
-before. Fix it once via the container's own root (no host `sudo` needed):
-
-```bash
-docker exec -u root -w /__w/IfcOpenShell/IfcOpenShell <container-name> \
-    chown -R "$(id -u)":"$(id -g)" .git/modules build output build.log /ccache
-```
-
-(`<container-name>` is `ifcopenshell-<UNIQUE_ID>` - see `docker ps -a`.)
-
-## Other things worth knowing
-
-- **Linux x64 only.** `compose.yaml` pins `platform: linux/amd64`; on an
-  ARM host (e.g. Apple Silicon) this build isn't available.
-- **The final "Package .zip archives" step of `build()` has a pre-existing
-  bash syntax error**, unrelated to compilation - the actual build already
-  succeeded by that point (look for `Built IfcOpenShell...` in the output),
-  so this is safe to ignore if you only need the raw artifacts under
-  `build/.../install/`, not packaged release zips.
-- **`test_mmaped_stream` and similar `USE_MMAP`-dependent tests will fail**
-  against this build - `nix/build-all.py` is invoked with `USE_MMAP=OFF`
-  here. Not a bug in your code if you see it fail.
-- Only the bind-mounted `<repo>/build` lives on the host filesystem your
-  repo is checked out on. Anything the container writes *outside* that
-  mount lives in the container's own writable layer under Docker's data
-  root (commonly `/var/lib/docker`, i.e. usually your root partition) -
-  keep an eye on `df -h /` if you're running several of these containers
-  at once.

docker/compose.yaml

@@ -1,15 +0,0 @@
-name: ifcopenshell-${UNIQUE_ID}
-services:
-  ifcopenshell:
-    container_name: ifcopenshell-${UNIQUE_ID}
-    image: ifcopenshell-build-env:updated
-    platform: linux/amd64
-    volumes:
-      - type: bind
-        source: ../
-        target: /__w/IfcOpenShell/IfcOpenShell
-      - ccache:/ccache
-
-volumes:
-  ccache:
-    name: ifcopenshell-ccache-shared

docker/ifcos_env

@@ -1,339 +0,0 @@
-#!/bin/bash
-
-# ================== CONFIG ==================
-SCRIPT_NAME=$(basename "$0")
-ENV_FILE=".env"
-WORKDIR="/__w/IfcOpenShell/IfcOpenShell"
-NAMEPREFIX=ifcopenshell
-
-function set_env() {
-    # Load .env file if it exists
-    if [[ -f "$ENV_FILE" ]]; then
-        set -a
-        source "$ENV_FILE"
-        set +a
-        echo "✅ Loaded environment variables from $ENV_FILE"
-    else
-        echo "⚠️  No $ENV_FILE found, proceeding without it."
-    fi
-}
-
-set_env
-
-# ================ FUNCTIONS =================
-
-function create() {
-    echo "⭐ Creating image: ifcopenshell-build-env"
-    docker build -f Dockerfile \
-        --build-arg USER_UID="$(id -u)" --build-arg USER_GID="$(id -g)" \
-        -t ifcopenshell-build-env:updated .
-}
-
-function update() {
-    # The Dockerfile always builds FROM a clean rockylinux:9 and does
-    # `dnf update -y` as its first step, so re-running create() is enough
-    # to get fresh packages.
-    echo "⚡ Updating image: ifcopenshell-build-env"
-    create
-}
-
-function up() {
-    # Creates the container if it doesn't exist yet (and starts it either
-    # way) - this is the one that needs ready_repo, since a freshly created
-    # container has no submodules/dependency cache in place yet.
-    echo "🚀 Creating/starting stack: ifcopenshell-${UNIQUE_ID}"
-    unique          # Update UNIQUE_ID first
-    docker compose up -d "$@"   # Container must exist before ready_repo can exec into it.
-    ready_repo      # Ensure repo is recursive, and the build repo is in place.
-}
-
-function down() {
-    # Removes the container (and its network) entirely. Named volumes
-    # (ccache) and the bind-mounted repo/build/ survive; up() will recreate
-    # the container from scratch next time.
-    echo "🔥 Removing stack: ifcopenshell-${UNIQUE_ID}"
-    docker compose down "$@"
-}
-
-function stop() {
-    # Stops the existing container without removing it - the container,
-    # its filesystem layer, and its exec history all remain intact.
-    echo "🛑 Stopping stack: ifcopenshell-${UNIQUE_ID}"
-    docker compose stop "$@"
-}
-
-function start() {
-    # Starts a previously-stopped container back up. Does nothing (and
-    # won't create anything) if the container doesn't exist - use up() for
-    # that.
-    echo "▶️  Starting stack: ifcopenshell-${UNIQUE_ID}"
-    docker compose start "$@"
-}
-
-function restart() {
-    echo "🔄 Restarting stack (stop, then start)..."
-    stop
-    start
-}
-
-function recreate() {
-    echo "♻️  Recreating stack (down, then up)..."
-    down
-    up
-}
-
-function logs() {
-    echo "📜 Showing logs..."
-    docker compose logs -f "$@"
-}
-
-function ps() {
-    docker compose ps
-}
-
-function config() {
-    echo "🔍 Validated compose configuration:"
-    docker compose config
-}
-
-function remove() {
-    # Lower-level than down(): removes already-stopped containers without
-    # touching the compose network. Mostly useful after a plain stop().
-    echo "🗑️  Removing stopped containers: ifcopenshell-${UNIQUE_ID}"
-    docker compose rm "$@"
-}
-
-function unique() {
-    echo "🔧 Making stack name folder specific..."
-
-    REGEX="^UNIQUE_ID="
-
-    if [[ ! -f "$ENV_FILE" ]] || ! grep -qE "$REGEX" "$ENV_FILE"; then
-        echo -e "\nUNIQUE_ID=dummy\n" >> "$ENV_FILE"
-    fi
-
-    export UNIQUE_ID="$(pwd | sha256sum | cut -c -8)"
-
-    # `sed -i` takes incompatible syntax between GNU sed (Linux) and BSD sed
-    # (macOS) - `-si` is GNU-only and errors as "illegal option -- s" under
-    # BSD/macOS sed. Avoid -i altogether and do the in-place edit via a temp
-    # file + mv instead, which behaves identically with either sed.
-    local tmp_file
-    tmp_file="$(mktemp "${ENV_FILE}.XXXXXX")"
-    sed "s/^UNIQUE_ID=.*$/UNIQUE_ID=${UNIQUE_ID}/" "$ENV_FILE" > "$tmp_file"
-    mv "$tmp_file" "$ENV_FILE"
-
-    set_env
-}
-
-function ready_repo() {
-    echo "👍 Getting the repo ready to build..."
-    docker exec -i -w "${WORKDIR}" "${NAMEPREFIX}-${UNIQUE_ID}" bash -c '
-        set -euo pipefail   # Recommended for robustness
-
-        git submodule update --init --recursive
-
-        if [[ ! -d "build" ]]; then
-            git clone -b rockylinux9-x64 https://github.com/IfcOpenShell/build-outputs.git build
-        else
-            cd build
-            git pull
-            cd ..
-        fi
-
-        if [[ ! -d "build/Linux/x86_64/install/boost-1.86.0/" ]]; then
-            cd build
-            uv run ../nix/cache_dependencies.py unpack
-            cd ..
-        fi
-    '
-}
-
-function build() {
-    echo "☕ Execute the build, go make yourself a cuppa... I'll be a while"
-    local BUILD_TARGET="$1"
-    
-    docker exec -i -w "${WORKDIR}" -e PY_TGT="${PY_TGT}" -e BUILD_TARGET="${BUILD_TARGET}" "${NAMEPREFIX}-${UNIQUE_ID}" bash -c '
-        set -o pipefail
-        CXXFLAGS="-O3" CFLAGS="-O3 ${DARWIN_C_SOURCE}" ADD_COMMIT_SHA=1 BUILD_CFG=Release uv run ./nix/build-all.py -v ${PY_TGT:+-$PY_TGT} --diskcleanup ${BUILD_TARGET} 2>&1 | tee build.log
-    '
-    echo "🎒 Pack Dependencies"
-    docker exec -i -w "${WORKDIR}" "${NAMEPREFIX}-${UNIQUE_ID}" bash -c '
-        cd build
-        uv run ../nix/cache_dependencies.py pack
-    '
-
-    echo "🎁 Package .zip archives"
-    docker exec -i -w "${WORKDIR}" -e GITHUB_SHA="$(git rev-parse HEAD)" "${NAMEPREFIX}-${UNIQUE_ID}" bash -c '
-        OUTPUT_DIR=${PWD}/output
-        VERSION=v`cat VERSION`
-        mkdir -p ${OUTPUT_DIR}
-        cd ./build/`uname`/*/install/ifcopenshell
-
-        ls -d python-* | while read py_version; do
-            postfix=`echo ${py_version: -1} | sed s/[0-9]//`
-            numbers=`echo $py_version | grep -oE "[0-9]+\.[0-9]+" | tr -d "."`
-            py_version_major=python-${numbers}$postfix
-            pushd . > /dev/null
-            cd $py_version
-            if [ ! -d ifcopenshell ]; then
-                mkdir ../ifcopenshell_
-                mv * ../ifcopenshell_
-                mv ../ifcopenshell_ ifcopenshell
-            fi
-            [ -d ifcopenshell/__pycache__ ] && rm -rf ifcopenshell/__pycache__
-            find ifcopenshell -name "*.pyc" -delete
-            zip -r -qq ifcopenshell-${py_version_major}-${VERSION}-${GITHUB_SHA:0:7}-linux64.zip ifcopenshell/*
-            mv *.zip ${OUTPUT_DIR}/
-            popd > /dev/null
-        done
-
-        cd bin
-        if compgen -G "./*.zip" > /dev/null; then
-            rm *.zip 2>&1 >/dev/null || true
-        ls | while read exe; do
-            zip -qq -r ${exe}-${VERSION}-${GITHUB_SHA:0:7}-linux64.zip $exe
-        done
-        mv *.zip ${OUTPUT_DIR}/
-        cd ..
-      '
-}
-
-function attach() {
-    echo "🔦 Connect to interactive shell"
-    docker exec -it  -w "${WORKDIR}" "${NAMEPREFIX}-${UNIQUE_ID}" /bin/bash
-}
-
-function try() {
-    # Copies the freshly built wrapper into your actual Blender/Bonsai
-    # installation for manual, in-Blender testing. This is a human-only
-    # convenience: it overwrites files in your live Blender setup, so it's
-    # not something that should run unattended as part of an automated or
-    # AI-driven build/test loop (which should instead copy the wrapper into
-    # the repo's own src/ifcopenshell-python/ifcopenshell/ - see SKILL.md).
-    echo "🚴 Copying build artifacts into your Blender resource folder for testing"
-
-    if [[ -z "${BLENDER_USER_RESOURCE:-}" ]]; then
-        echo "❌ BLENDER_USER_RESOURCE is not set in .env."
-        echo "   Add a line pointing at wherever Blender's user resource folder for"
-        echo "   the Bonsai extension actually is on your system, e.g.:"
-        echo "     BLENDER_USER_RESOURCE=~/.config/blender/bonsai/"
-        return 1
-    fi
-
-    # Normalise: expand a leading ~ (in case it was quoted in .env and so
-    # never went through shell tilde-expansion when set_env sourced it),
-    # then resolve to an absolute, symlink-free path.
-    local resource="${BLENDER_USER_RESOURCE/#\~/$HOME}"
-    resource="$(realpath -m "$resource")"
-
-    local install_dir="../build/Linux/x86_64/install"
-    local py_dirs=("$install_dir"/python-*)
-    if [[ ${#py_dirs[@]} -gt 1 && -n "${PY_TGT:-}" ]]; then
-        # PY_TGT is compact (py-311); the install dirs are dotted
-        # (python-3.11.8) - reinsert the dot (assumes a single-digit major
-        # version, true for the Python 3.x line) before matching.
-        local py_tgt_digits="${PY_TGT#py-}"
-        local py_tgt_dotted="${py_tgt_digits:0:1}.${py_tgt_digits:1}"
-        local filtered=() d
-        for d in "${py_dirs[@]}"; do
-            [[ "$(basename "$d")" == "python-${py_tgt_dotted}."* ]] && filtered+=("$d")
-        done
-        [[ ${#filtered[@]} -gt 0 ]] && py_dirs=("${filtered[@]}")
-    fi
-    if [[ ${#py_dirs[@]} -ne 1 || ! -d "${py_dirs[0]}" ]]; then
-        echo "❌ Expected exactly one built python-* dir under $install_dir, found ${#py_dirs[@]}."
-        echo "   Run 'build' first, or set PY_TGT in .env to disambiguate a multi-version build."
-        return 1
-    fi
-
-    local py_minor
-    py_minor="$(basename "${py_dirs[0]}" | grep -oE '[0-9]+\.[0-9]+')"
-    local wrapper_dir="${py_dirs[0]}/lib/python${py_minor}/site-packages/ifcopenshell"
-    if [[ ! -f "$wrapper_dir/ifcopenshell_wrapper.py" ]]; then
-        echo "❌ Built wrapper not found at $wrapper_dir - run 'build' first."
-        return 1
-    fi
-
-    local target="$resource/extensions/.local/lib/python${py_minor}/site-packages/ifcopenshell"
-    mkdir -p "$target"
-    cp "$wrapper_dir"/_ifcopenshell_wrapper*.so "$target/"
-    cp "$wrapper_dir"/ifcopenshell_wrapper.py "$target/"
-    echo "✅ Copied wrapper into $target"
-}
-
-function clean() {
-    # Host-side only - doesn't touch the container, image, or ccache volume.
-    echo "💎 Clean the build and output folder up"
-    if [[ -d "../build" ]]; then
-        rm -rf ../build
-    fi
-    if [[ -d "../output" ]]; then
-        rm -rf ../output
-    fi
-}
-
-
-function help() {
-    cat <<EOF
-Usage: ./$SCRIPT_NAME <command>
-
-Available commands:
-  create      Build the rocky9-based image
-  update      Rebuild the image fresh, picking up OS package updates
-  up          Create the container if it doesn't exist yet, and start it
-  down        Remove the container entirely (docker compose down)
-  stop        Stop the container without removing it
-  start       Start a previously-stopped container
-  restart     stop, then start (same container, no recreation)
-  recreate    down, then up (fresh container)
-  build       Execute the IfcOpenShell build
-  attach      Connect to an interactive shell in the container
-  try         Copy the built wrapper into your Blender resource folder
-              (human-only - see BLENDER_USER_RESOURCE below, and SKILL.md
-              for the AI/automated-testing equivalent)
-  clean       Remove the build and output folders
-  logs        Follow container logs
-  ps          Show running containers
-  config      Validate and show compose config
-  remove      Remove stopped containers (docker compose rm)
-  help        Show this help
-
-Environment variables from .env are automatically loaded, including:
-  PY_TGT                  Restrict the build to one Python version, e.g. py-311
-  UNIQUE_ID               Recalculated automatically on every 'up', don't set by hand
-  BLENDER_USER_RESOURCE   Where 'try' copies the wrapper for manual testing, e.g.
-                          ~/.config/blender/bonsai/
-EOF
-}
-
-# ================= MAIN =================
-
-case "$1" in
-    create)         create ;;
-    update)         update ;;
-    up)             up "${@:2}" ;;
-    down)           down "${@:2}" ;;
-    stop)           stop "${@:2}" ;;
-    start)          start "${@:2}" ;;
-    restart)        restart ;;
-    recreate)       recreate ;;
-    build)          build "${@:2}" ;;
-    attach)         attach ;;
-    try)            try ;;
-    clean)          clean ;;
-    logs)           logs "${@:2}" ;;
-    ps)             ps ;;
-    config)         config ;;
-    remove)         remove ;;
-    help|-h|--help) help ;;
-    "")
-        echo "❌ No command provided."
-        help
-        ;;
-    *)
-        echo "❌ Unknown command: $1"
-        echo "Type './$SCRIPT_NAME help' for available commands."
-        exit 1
-        ;;
-esac

src/bonsai/Makefile

@@ -106,7 +106,7 @@ endif
 endif # def PLATFORM
 
 # Current build commit hash.
-OLD:=3e7b739
+OLD:=1c5b825
 .PHONY: bump
 bump:
 ifndef NEW

src/bonsai/bonsai/bim/__init__.py

@@ -90,7 +90,6 @@ modules = {
     "web": None,
     "light": None,
     "alignment": None,
-    "clip_box": None,
     # Uncomment this line to enable loading of the demo module. Happy hacking!
     # The name "demo" must correlate to a folder name in `bim/module/`.
     # "demo": None,

src/bonsai/bonsai/bim/data/pset/EPset_Drawing.ifc

@@ -5,7 +5,7 @@ FILE_NAME('EPset_Drawing.ifc','2020-01-01T00:00:00',$,$,'EPset_Drawing','EPset_D
 FILE_SCHEMA(('IFC4'));
 ENDSEC;
 DATA;
-#1=IFCPROPERTYSETTEMPLATE('2JhNIvqZrFnAgxfhK0XVQX',$,'EPset_Drawing','',.PSET_OCCURRENCEDRIVEN.,'IfcAnnotation/DRAWING',(#23,#22,#27,#24,#29,#30,#19,#12,#26,#9,#8,#7,#6,#4,#18,#11,#5,#20,#25,#14,#10,#17,#28,#16,#3,#21,#13,#15,#2));
+#1=IFCPROPERTYSETTEMPLATE('2JhNIvqZrFnAgxfhK0XVQX',$,'EPset_Drawing','',.PSET_OCCURRENCEDRIVEN.,'IfcAnnotation/DRAWING',(#23,#22,#27,#24,#19,#12,#26,#9,#8,#7,#6,#4,#18,#11,#5,#20,#25,#14,#10,#17,#28,#16,#3,#21,#13,#15,#2));
 #2=IFCSIMPLEPROPERTYTEMPLATE('23JavTMk98ZxXhrUEnjAcf',$,'TargetView','',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
 #3=IFCSIMPLEPROPERTYTEMPLATE('1yVWUt5H9DAOuu0OaMMLpe',$,'Scale','The scale of this drawing represented as a numerator and denominator, such as 1/100',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
 #4=IFCSIMPLEPROPERTYTEMPLATE('3gsuPBtU93b8f0gg1pjkq6',$,'HumanScale','The scale of this drawing in human readable format, such as 1:100',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
@@ -33,7 +33,5 @@ DATA;
 #26=IFCSIMPLEPROPERTYTEMPLATE('2iwERDOW55Pf4hCbuFRe1Q',$,'FillMode','Method to fill areas seen in projection',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
 #27=IFCSIMPLEPROPERTYTEMPLATE('1YF$qLzBzF19Io8aB2N8cE',$,'CutMode','Method for cutting geometry',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
 #28=IFCSIMPLEPROPERTYTEMPLATE('1YSnFzurrEyRNtoLdmmddP',$,'BringToFront','The objects with these SVG classes will render in front of all other objects.Ex: IfcBeam, IfcColumn',.P_SINGLEVALUE.,'IfcText',$,$,$,$,$,.READWRITE.);
-#29=IFCSIMPLEPROPERTYTEMPLATE('0lP6Y8q9v2QhDnR4sT7uVx',$,'PerspectiveShiftX','Horizontal perspective camera shift stored as drawing metadata using Blender camera shift units.',.P_SINGLEVALUE.,'IfcReal',$,$,$,$,$,.READWRITE.);
-#30=IFCSIMPLEPROPERTYTEMPLATE('2mR8b1NcW5EoFyG7hJ9kLp',$,'PerspectiveShiftY','Vertical perspective camera shift stored as drawing metadata using Blender camera shift units.',.P_SINGLEVALUE.,'IfcReal',$,$,$,$,$,.READWRITE.);
 ENDSEC;
 END-ISO-10303-21;

src/bonsai/bonsai/bim/handler.py

@@ -51,11 +51,9 @@ from bonsai.bim.module.model.decorator import (
     BoundingBoxDecorator,
     DoorSwingReadonlyDecorator,
     MEPSegmentExtendPreviewDecorator,
-    MEPSystemPathDecorator,
     SlabDirectionDecorator,
     WallAxisDecorator,
     WallFilletPreviewDecorator,
-    WallSystemPathDecorator,
 )
 from bonsai.bim.module.model.wall import WallGizmoPreviewDecorator
 from bonsai.bim.module.nest.decorator import NestDecorator
@@ -320,11 +318,9 @@ def loadIfcStore(scene: bpy.types.Scene) -> None:
     IfcStore.purge()
     refresh_ui_data()
     if not tool.Ifc.get():
-        tool.Autosave.cancel_timer()
         return
     tool.Ifc.schema()
     IfcStore.relink_all_objects()
-    tool.Autosave.reset_timer()
 
 
 @persistent
@@ -517,8 +513,6 @@ def _install_viewport_overlays() -> None:
     NestDecorator.uninstall()
     WallAxisDecorator.uninstall()
     SlabDirectionDecorator.uninstall()
-    MEPSystemPathDecorator.uninstall()
-    WallSystemPathDecorator.uninstall()
     WallFilletPreviewDecorator.uninstall()
     BendPreviewDecorator.uninstall()
     MEPSegmentExtendPreviewDecorator.uninstall()
@@ -538,9 +532,6 @@ def _install_viewport_overlays() -> None:
             WallAxisDecorator.install(bpy.context)
         if model_props.show_slab_direction:
             SlabDirectionDecorator.install(bpy.context)
-        if model_props.show_paths:
-            MEPSystemPathDecorator.install(bpy.context)
-            WallSystemPathDecorator.install(bpy.context)
         if model_props.show_bounding_box:
             BoundingBoxDecorator.install(bpy.context)
         # Always-installed: draw() self-polls on Scene.BIMPreviewProperties.

src/bonsai/bonsai/bim/import_ifc.py

@@ -223,7 +223,6 @@ class IfcImporter:
         self.elements: set[ifcopenshell.entity_instance] = set()
         self.annotations: set[ifcopenshell.entity_instance] = set()
         self.gross_elements: set[ifcopenshell.entity_instance] = set()
-        self.broken_arrays: set[ifcopenshell.entity_instance] = set()
         self.element_types: set[ifcopenshell.entity_instance] = set()
         self.spatial_elements: set[ifcopenshell.entity_instance] = set()
         self.meshes: dict[str, OBJECT_DATA_TYPE] = {}
@@ -980,13 +979,8 @@ class IfcImporter:
                     if unit.Name == "METRE":
                         if not unit.Prefix:
                             bpy.context.scene.unit_settings.length_unit = "METERS"
-                        elif f"{unit.Prefix}METERS" in ("KILOMETERS", "CENTIMETERS", "MILLIMETERS", "MICROMETERS"):
-                            bpy.context.scene.unit_settings.length_unit = f"{unit.Prefix}METERS"
                         else:
-                            # Blender's length_unit enum has no entry for other
-                            # SI prefixes (e.g. DECIMETERS), so fall back to
-                            # adaptive display instead of failing to open.
-                            bpy.context.scene.unit_settings.length_unit = "ADAPTIVE"
+                            bpy.context.scene.unit_settings.length_unit = f"{unit.Prefix}METERS"
                 else:
                     bpy.context.scene.unit_settings.system = "IMPERIAL"
                     name = unit.Name.lower()
@@ -1226,17 +1220,7 @@ class IfcImporter:
                             continue
                     for i in range(len(data)):
                         tool.Array.set_children_lock_state(element, i, True)
-                    tool.Array.constrain_children_to_parent(element)
-                    for layer in data:
-                        for child_guid in layer.get("children", ()):
-                            try:
-                                self.file.by_guid(child_guid)
-                            except RuntimeError:
-                                print(
-                                    f"setup_arrays: array parent {element.GlobalId} references missing "
-                                    f"child GUID {child_guid!r}."
-                                )
-                                self.broken_arrays.add(element)
+                        tool.Array.constrain_children_to_parent(element)
 
     def update_linked_aggregates(self):
         # TODO Remove this after a while. See commit 17d6b8a

src/bonsai/bonsai/bim/module/aggregate/decorator.py

@@ -20,6 +20,7 @@ import blf
 import bpy
 import gpu
 import ifcopenshell.util.element
+from bpy.types import SpaceView3D
 from bpy_extras import view3d_utils
 from gpu_extras.batch import batch_for_shader
 from mathutils import Vector
@@ -27,6 +28,12 @@ from mathutils import Vector
 import bonsai.tool as tool
 
 
+def transparent_color(color, alpha=0.1):
+    color = [i for i in color]
+    color[3] = alpha
+    return color
+
+
 def create_bounding_box(objs):
     # Initialize the bounding box coordinates
     min_x, min_y, min_z = float("inf"), float("inf"), float("inf")
@@ -72,8 +79,26 @@ def create_bounding_box(objs):
     return indices, edges
 
 
-class AggregateDecorator(tool.Blender.ViewportDecorator):
-    draw_method = "draw_aggregate"
+class AggregateDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_aggregate, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
 
     def dotted_line_shader(self):
         vert_out = gpu.types.GPUStageInterfaceInfo("my_interface")
@@ -128,6 +153,14 @@ class AggregateDecorator(tool.Blender.ViewportDecorator):
         shader.uniform_float("u_Scale", 25)
         batch.draw(shader)
 
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
+
     def draw_aggregate(self, context):
         props = tool.Aggregate.get_aggregate_props()
         self.addon_prefs = tool.Blender.get_addon_preferences()
@@ -158,13 +191,12 @@ class AggregateDecorator(tool.Blender.ViewportDecorator):
                 aggregates.append(obj)
                 continue
 
-            aggregate = None
             aggregates_list = tool.Aggregate.get_aggregates_recursively(element)
             if props.in_aggregate_mode and props.editing_aggregate:
                 index = aggregates_list.index(tool.Ifc.get_entity(props.editing_aggregate))
                 if index > 0:
                     aggregate = aggregates_list[index - 1]
-            elif aggregates_list:
+            else:
                 aggregate = aggregates_list[-1]
             if aggregate:
                 aggregates.append(tool.Ifc.get_object(aggregate))
@@ -193,11 +225,39 @@ class AggregateDecorator(tool.Blender.ViewportDecorator):
             self.draw_custom_batch(line, decorator_color_unselected)
 
 
-class AggregateModeDecorator(tool.Blender.ViewportDecorator):
-    draw_methods = (
-        ("draw_aggregate_name", "POST_PIXEL"),
-        ("draw_aggregate_empty", "POST_VIEW"),
-    )
+class AggregateModeDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(
+            SpaceView3D.draw_handler_add(handler.draw_aggregate_name, (context,), "WINDOW", "POST_PIXEL")
+        )
+        cls.handlers.append(
+            SpaceView3D.draw_handler_add(handler.draw_aggregate_empty, (context,), "WINDOW", "POST_VIEW")
+        )
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
 
     def draw_aggregate_name(self, context):
         if context.mode == "EDIT_MESH":

src/bonsai/bonsai/bim/module/boundary/decorator.py

@@ -56,6 +56,11 @@ class BoundaryDecorator:
         unselected_elements_color = self.addon_prefs.decorator_color_unselected
         special_elements_color = self.addon_prefs.decorator_color_special
 
+        def transparent_color(color, alpha=0.1):
+            color = [i for i in color]
+            color[3] = alpha
+            return color
+
         gpu.state.point_size_set(6)
         gpu.state.blend_set("ALPHA")
 
@@ -104,11 +109,7 @@ class BoundaryDecorator:
 
         if unselected_edges:
             self.draw_batch("LINES", unselected_vertices, special_elements_color, unselected_edges)
-            self.draw_batch(
-                "TRIS", unselected_vertices, tool.Blender.transparent_color(special_elements_color), unselected_tris
-            )
+            self.draw_batch("TRIS", unselected_vertices, transparent_color(special_elements_color), unselected_tris)
         if selected_edges:
             self.draw_batch("LINES", selected_vertices, selected_elements_color, selected_edges)
-            self.draw_batch(
-                "TRIS", selected_vertices, tool.Blender.transparent_color(selected_elements_color), selected_tris
-            )
+            self.draw_batch("TRIS", selected_vertices, transparent_color(selected_elements_color), selected_tris)

src/bonsai/bonsai/bim/module/clash/decorator.py

@@ -18,17 +18,43 @@
 
 import blf
 import gpu
+from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
+from gpu_extras.batch import batch_for_shader
 from mathutils import Vector
 
 import bonsai.tool as tool
 
 
-class ClashDecorator(tool.Blender.ViewportDecorator):
-    draw_methods = (
-        ("draw_text", "POST_PIXEL"),
-        ("draw_geometry", "POST_VIEW"),
-    )
+class ClashDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_text, (context,), "WINDOW", "POST_PIXEL"))
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_geometry, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
 
     def draw_text(self, context):
         self.addon_prefs = tool.Blender.get_addon_preferences()

src/bonsai/bonsai/bim/module/clip_box/__init__.py

@@ -1,130 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-import bpy
-from bpy.app.handlers import persistent
-
-import bonsai.tool as tool
-
-from . import face_quad, gizmos, operator, prop, ui
-
-classes = (
-    operator.BIM_OT_add_clip_box,
-    operator.BIM_OT_add_clip_box_for_source,
-    operator.BIM_OT_align_view_to_clip_face,
-    operator.BIM_OT_duplicate_clip_box,
-    operator.BIM_OT_remove_clip_box,
-    operator.BIM_OT_set_active_clip_box,
-    operator.BIM_OT_toggle_clip_box_enabled,
-    prop.BIMClipBoxProperties,
-    prop.BIMSceneClipBoxProperties,
-    face_quad.BIM_GT_box_face_quad,
-    face_quad.BIM_GT_box_face_outline,
-    gizmos.OBJECT_GGT_bim_clip_box,
-    ui.BIM_MT_clip_box_add_for_source,
-    ui.BIM_MT_clip_box_info,
-    ui.BIM_MT_clip_box_settings,
-    ui.BIM_UL_clip_box,
-    ui.BIM_PT_clip_box,
-)
-
-
-@persistent
-def _on_depsgraph_update(scene, depsgraph):
-    tool.ClipBox.on_depsgraph_update(scene, depsgraph)
-    tool.ClipBox.on_depsgraph_update_caps(scene, depsgraph)
-
-
-@persistent
-def _on_load_pre(filepath):
-    # Tear down any in-flight clip-box timers before Blender frees the
-    # WM / screens / areas / regions for the loading file. A refresh timer
-    # that survives the teardown fires against the new file's freshly-
-    # allocated regions before their GPU state is wired, CTD-ing inside
-    # GPU_matrix_ortho_set. The gate also blocks the depsgraph IFC-reload
-    # branch and is held closed until on_pre_view fires for the first time
-    # on the new file (first paint = GPU contexts wired).
-    tool.ClipBox._file_loading = True
-    tool.ClipBox._post_load_paint_pending = True
-    tool.ClipBox._cancel_pending_refresh()
-    tool.ClipBox._cancel_pending_cap_rebuild()
-
-
-@persistent
-def _on_load_post(filepath):
-    # The _file_loading gate is NOT cleared here: load_post fires before
-    # the new file's first paint, so GPU contexts may still be uninitialised.
-    # on_pre_view consumes _post_load_paint_pending to open the gate at the
-    # safe moment and kick the post-load re-arm.
-    # Restore the per-scene clip-box list from the project's BBIM_ClipBoxes
-    # pset. Runs after the standard load_post that creates Blender objects.
-    tool.ClipBox._last_seen_object_matrices.clear()
-    tool.ClipBox.load_from_project_pset()
-
-
-_draw_handler_pre = None
-_draw_handler_post = None
-
-
-def register():
-    global _draw_handler_pre, _draw_handler_post
-    bpy.types.Object.BIMClipBoxProperties = bpy.props.PointerProperty(type=prop.BIMClipBoxProperties)
-    bpy.types.Scene.BIMSceneClipBoxProperties = bpy.props.PointerProperty(type=prop.BIMSceneClipBoxProperties)
-    tool.ClipBox.reset_ownership()
-    if _on_depsgraph_update not in bpy.app.handlers.depsgraph_update_post:
-        bpy.app.handlers.depsgraph_update_post.append(_on_depsgraph_update)
-    if _on_load_pre not in bpy.app.handlers.load_pre:
-        bpy.app.handlers.load_pre.append(_on_load_pre)
-    if _on_load_post not in bpy.app.handlers.load_post:
-        bpy.app.handlers.load_post.append(_on_load_post)
-    if _draw_handler_pre is None:
-        _draw_handler_pre = bpy.types.SpaceView3D.draw_handler_add(tool.ClipBox.on_pre_view, (), "WINDOW", "PRE_VIEW")
-    if _draw_handler_post is None:
-        _draw_handler_post = bpy.types.SpaceView3D.draw_handler_add(
-            tool.ClipBox.on_post_view_caps, (), "WINDOW", "POST_VIEW"
-        )
-
-
-def unregister():
-    global _draw_handler_pre, _draw_handler_post
-    if _draw_handler_post is not None:
-        try:
-            bpy.types.SpaceView3D.draw_handler_remove(_draw_handler_post, "WINDOW")
-        except ValueError:
-            pass
-        _draw_handler_post = None
-    if _draw_handler_pre is not None:
-        try:
-            bpy.types.SpaceView3D.draw_handler_remove(_draw_handler_pre, "WINDOW")
-        except ValueError:
-            pass
-        _draw_handler_pre = None
-    if _on_load_post in bpy.app.handlers.load_post:
-        bpy.app.handlers.load_post.remove(_on_load_post)
-    if _on_load_pre in bpy.app.handlers.load_pre:
-        bpy.app.handlers.load_pre.remove(_on_load_pre)
-    if _on_depsgraph_update in bpy.app.handlers.depsgraph_update_post:
-        bpy.app.handlers.depsgraph_update_post.remove(_on_depsgraph_update)
-    tool.ClipBox._cancel_pending_refresh()
-    tool.ClipBox._cancel_pending_cap_rebuild()
-    tool.ClipBox._last_seen_object_matrices.clear()
-    tool.ClipBox.clear_clip_planes()
-    del bpy.types.Object.BIMClipBoxProperties
-    del bpy.types.Scene.BIMSceneClipBoxProperties

src/bonsai/bonsai/bim/module/clip_box/data.py

@@ -1,212 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-"""EnumProperty ``items=`` callbacks for the source-based clip-box picker.
-
-Each callback returns ``[(id_str, label, description)]`` where ``id_str`` is
-an IFC entity id stringified for entity-driven kinds, an IFC class name for
-``CLASS``, or a fixed status name for ``STATUS``. The clip-box operator
-turns the picked id into a ``matrix_world`` via the source-preset helper.
-"""
-
-from __future__ import annotations
-
-import bonsai.tool as tool
-
-EnumItems = list[tuple[str, str, str]]
-
-# Module-level cache. Blender's EnumProperty stores raw char pointers from the
-# tuples a callback returns, so the Python strings must outlive the draw call.
-# Stashing the latest result per kind keeps them alive across callback firings.
-_items_cache: dict[str, EnumItems] = {}
-
-# Sentinel id used for the "no options available" placeholder. The operator
-# treats this as an invalid pick and surfaces an ERROR.
-NO_OPTIONS_ID = "__none__"
-
-
-def _cache(kind: str, items: EnumItems) -> EnumItems:
-    _items_cache[kind] = items
-    return items
-
-
-def _no_options(label: str) -> EnumItems:
-    # Blender refuses to draw an EnumProperty with zero entries — show a
-    # placeholder so the dialog renders and the user sees the empty state.
-    return [(NO_OPTIONS_ID, label, "")]
-
-
-def _label(entity, ifc_class: str | None = None) -> str:
-    name = (getattr(entity, "Name", None) or "Unnamed").strip() or "Unnamed"
-    return f"{ifc_class}: {name}" if ifc_class else name
-
-
-def _build_items(kind: str, empty_label: str, build_fn) -> EnumItems:
-    """Shared shape for the IFC-driven enum callbacks.
-
-    Returns the no-IFC placeholder if no file is loaded, then runs
-    ``build_fn(ifc_file)``, sorts the result alphabetically by label, and
-    returns the empty-result placeholder if nothing matched. The output is
-    always routed through the module cache.
-    """
-    ifc = tool.Ifc.get()
-    if ifc is None:
-        return _cache(kind, _no_options("No IFC loaded"))
-    items = build_fn(ifc)
-    items.sort(key=lambda t: t[1].lower())
-    if not items:
-        return _cache(kind, _no_options(empty_label))
-    return _cache(kind, items)
-
-
-# Top-down spatial hierarchy so the picker reads in the order an architect
-# already thinks in, rather than a flat alphabetical mix. IfcSpace is excluded
-# — spaces are typically empty volumes used for room metadata, so clipping to
-# one rarely matches the user intent of "show me what's in this container".
-SPATIAL_CLASSES: tuple[str, ...] = (
-    "IfcProject",
-    "IfcSite",
-    "IfcBuilding",
-    "IfcBuildingStorey",
-)
-
-
-def spatial_items(self, context) -> EnumItems:
-    # Special-case: per-class sort within the hierarchy order rather than a
-    # flat alphabetical sort, so the dropdown reads project → site → building.
-    ifc = tool.Ifc.get()
-    if ifc is None:
-        return _cache("SPATIAL", _no_options("No IFC loaded"))
-    items: EnumItems = []
-    for ifc_class in SPATIAL_CLASSES:
-        try:
-            entities = ifc.by_type(ifc_class, include_subtypes=False)
-        except RuntimeError:
-            continue
-        for entity in sorted(entities, key=lambda e: (e.Name or "").lower()):
-            items.append((str(entity.id()), _label(entity, ifc_class), ""))
-    if not items:
-        return _cache("SPATIAL", _no_options("No spatial containers"))
-    return _cache("SPATIAL", items)
-
-
-def class_items(self, context) -> EnumItems:
-    # Special-case: the picker value IS the IFC class name, not an entity id,
-    # so the build shape differs from the other entity-driven callbacks.
-    ifc = tool.Ifc.get()
-    if ifc is None:
-        return _cache("CLASS", _no_options("No IFC loaded"))
-    # List only IFC classes ACTUALLY present in the file (not the whole
-    # schema), so the user picks from classes that can produce a non-empty
-    # clip volume. ``e.is_a()`` returns the most specific class per element.
-    present = sorted({e.is_a() for e in ifc.by_type("IfcProduct")})
-    if not present:
-        return _cache("CLASS", _no_options("No products"))
-    return _cache("CLASS", [(cls, cls, "") for cls in present])
-
-
-def type_items(self, context) -> EnumItems:
-    return _build_items(
-        "TYPE",
-        "No types defined",
-        lambda ifc: [(str(e.id()), _label(e, e.is_a()), "") for e in ifc.by_type("IfcTypeProduct")],
-    )
-
-
-def material_items(self, context) -> EnumItems:
-    return _build_items(
-        "MATERIAL",
-        "No materials defined",
-        lambda ifc: [(str(e.id()), _label(e), "") for e in ifc.by_type("IfcMaterial")],
-    )
-
-
-def profile_items(self, context) -> EnumItems:
-    # ProfileName is optional. Skip unnamed profiles — they can't be
-    # meaningfully picked from a flat list.
-    return _build_items(
-        "PROFILE",
-        "No named profiles",
-        lambda ifc: [
-            (str(e.id()), f"{e.is_a()}: {e.ProfileName}", "")
-            for e in ifc.by_type("IfcProfileDef")
-            if getattr(e, "ProfileName", None)
-        ],
-    )
-
-
-def drawing_items(self, context) -> EnumItems:
-    return _build_items(
-        "DRAWING",
-        "No drawings defined",
-        lambda ifc: [(str(e.id()), _label(e), "") for e in ifc.by_type("IfcAnnotation") if e.ObjectType == "DRAWING"],
-    )
-
-
-# Display labels for each status value. The id strings on the left are the
-# canonical Pset_*Common.Status enum values accepted by Bonsai's status query.
-STATUS_LABELS: tuple[tuple[str, str], ...] = (
-    ("No Status", "No Status"),
-    ("NEW", "New"),
-    ("EXISTING", "Existing"),
-    ("DEMOLISH", "Demolish"),
-    ("TEMPORARY", "Temporary"),
-    ("OTHER", "Other"),
-    ("NOTKNOWN", "Not Known"),
-    ("UNSET", "Unset"),
-)
-
-
-def status_items(self, context) -> EnumItems:
-    # Fixed enum; no IFC needed. Still routed through the cache to share the
-    # same string-lifetime guarantee as the other callbacks.
-    return _cache("STATUS", [(value, label, "") for value, label in STATUS_LABELS])
-
-
-def system_items(self, context) -> EnumItems:
-    # IfcStructuralAnalysisModel is a structural-grouping container, not a
-    # distribution system — excluded to match Bonsai's other system pickers.
-    return _build_items(
-        "SYSTEM",
-        "No systems defined",
-        lambda ifc: [
-            (str(e.id()), _label(e, e.is_a()), "")
-            for e in ifc.by_type("IfcSystem")
-            if not e.is_a("IfcStructuralAnalysisModel")
-        ],
-    )
-
-
-def group_items(self, context) -> EnumItems:
-    # include_subtypes=False so IfcSystem and IfcZone instances don't appear
-    # under Group as well — those get their own picker entries.
-    return _build_items(
-        "GROUP",
-        "No groups defined",
-        lambda ifc: [(str(e.id()), _label(e), "") for e in ifc.by_type("IfcGroup", include_subtypes=False)],
-    )
-
-
-def zone_items(self, context) -> EnumItems:
-    return _build_items(
-        "ZONE",
-        "No zones defined",
-        lambda ifc: [(str(e.id()), _label(e), "") for e in ifc.by_type("IfcZone")],
-    )

src/bonsai/bonsai/bim/module/clip_box/face_quad.py

@@ -1,879 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-"""Generic face-quad resize gizmos for any axis-aligned local box.
-
-This module contains the box-agnostic core of the interactive
-face-resize gizmos: two Gizmo classes (a near-invisible click target
-welded to each face, and a thin colored edge outline), a per-redraw
-orchestrator that places six of each on a box, and the pure one-sided
-resize arithmetic. None of it knows about IFC, clip boxes, or
-``BIMSceneClipBoxProperties`` — a future camera-view-box adapter can
-reuse the same classes and helpers.
-
-Consumer contract — the adapter group must:
-
-1. Create six ``BIM_GT_box_face_quad`` and six ``BIM_GT_box_face_outline``
-   instances at ``setup()`` time, in :data:`FACE_ROUTES` order, and bind
-   each quad's ``move_get_cb`` / ``move_set_cb`` to closures that read
-   and mutate the box's host (e.g. an Empty's ``location`` / ``scale``).
-2. Call :func:`apply_face_quad_layout` from ``refresh()`` /
-   ``draw_prepare()`` with the box's local-frame ``bmin`` / ``bmax``,
-   the host's ``matrix_world``, the OBB rotation as a 4x4
-   (``Matrix.Identity(4)`` when the rotation rides in ``matrix_world``),
-   and the current ``region`` / ``rv3d``.
-3. Implement ``_lock_for(active_gz)`` / ``_unlock_all()`` on the group
-   for drag mutual exclusion; the quad's ``invoke`` / ``exit`` call them.
-
-The resize arithmetic in :func:`compute_face_resize` is pure: feed it
-the modal scalar plus drag-start snapshots and it returns the host's
-new scale-on-axis and new origin location.
-"""
-
-from __future__ import annotations
-
-import math
-from collections.abc import Sequence
-from typing import Any
-
-import bpy
-from bpy_extras.view3d_utils import location_3d_to_region_2d, region_2d_to_location_3d
-from mathutils import Matrix, Vector
-
-# ---------------------------------------------------------------------------
-# Public iteration order
-# ---------------------------------------------------------------------------
-
-# (axis, is_max) pairs. The adapter group's ``setup()`` MUST create its
-# six face-quad gizmos in this order so positional indexing into the
-# layout helper stays correct.
-FACE_ROUTES: tuple[tuple[int, bool], ...] = (
-    (0, False),
-    (0, True),
-    (1, False),
-    (1, True),
-    (2, False),
-    (2, True),
-)
-
-
-# ---------------------------------------------------------------------------
-# Public visual constants (adapter reads these in setup())
-# ---------------------------------------------------------------------------
-
-# Standard XYZ axis colors (Blender convention).
-AXIS_COLOR: dict[int, tuple[float, float, float]] = {
-    0: (1.0, 0.2, 0.2),
-    1: (0.2, 1.0, 0.2),
-    2: (0.2, 0.4, 1.0),
-}
-
-# Documented "selectable but unpainted" trick: the GPU still writes the
-# selection buffer at this alpha so clicks register, but no visible
-# pixels are produced.
-FACE_QUAD_ALPHA: float = 0.001
-
-# Very faint hover tint — just enough to confirm "you're aiming at this
-# face" without painting visibly over geometry behind it.
-FACE_QUAD_ALPHA_HIGHLIGHT: float = 0.04
-
-# Setup-time default for ``select_bias``; the layout helper overwrites
-# it per frame to the front-facing or halo value below. Kept below the
-# canonical arrow bias so a bailed frame can't let a front quad steal
-# clicks meant for a hidden control.
-FACE_QUAD_SELECT_BIAS: float = 0.5
-
-
-# ---------------------------------------------------------------------------
-# Internal constants
-# ---------------------------------------------------------------------------
-
-# Unit quad in the local XY plane spanning [-0.5, 0.5]^2 at z=0. Two
-# CCW triangles viewed from +Z. matrix_basis stretches it onto the
-# face's perpendicular extents.
-_QUAD_TRIS: list[tuple[float, float, float]] = [
-    (-0.5, -0.5, 0.0),
-    (0.5, -0.5, 0.0),
-    (0.5, 0.5, 0.0),
-    (-0.5, -0.5, 0.0),
-    (0.5, 0.5, 0.0),
-    (-0.5, 0.5, 0.0),
-]
-
-# Unit-quad outline as 4 line segments in the local XY plane at z=0.
-_QUAD_OUTLINE_LINES: list[tuple[float, float, float]] = [
-    (-0.5, -0.5, 0.0),
-    (0.5, -0.5, 0.0),
-    (0.5, -0.5, 0.0),
-    (0.5, 0.5, 0.0),
-    (0.5, 0.5, 0.0),
-    (-0.5, 0.5, 0.0),
-    (-0.5, 0.5, 0.0),
-    (-0.5, -0.5, 0.0),
-]
-
-# Degenerate zero-area triangle for hidden back-facing quads with no
-# visible-adjacent neighbours (rare orientation). Blender tolerates
-# this; the gizmo is hidden anyway so nothing renders.
-_EMPTY_TRIS: list[tuple[float, float, float]] = [
-    (0.0, 0.0, 0.0),
-    (0.0, 0.0, 0.0),
-    (0.0, 0.0, 0.0),
-]
-
-# Rotates the gizmo's local +Z onto the outward face normal in the
-# box's local frame. Right-hand rotation around the named axis.
-_AXIS_ORIENT: dict[tuple[int, bool], Matrix] = {
-    (0, False): Matrix.Rotation(-math.pi / 2, 4, "Y"),
-    (0, True): Matrix.Rotation(math.pi / 2, 4, "Y"),
-    (1, False): Matrix.Rotation(math.pi / 2, 4, "X"),
-    (1, True): Matrix.Rotation(-math.pi / 2, 4, "X"),
-    (2, False): Matrix.Rotation(math.pi, 4, "X"),
-    (2, True): Matrix.Identity(4),
-}
-
-# Per-face mapping from face-quad local axes to local box axes for the
-# perpendicular-extent scale. ``(w_axis, h_axis)`` — the box-local axis
-# indices the quad's local X and Y span after the orientation rotation.
-_QUAD_PERP_AXES: dict[tuple[int, bool], tuple[int, int]] = {
-    (0, False): (2, 1),
-    (0, True): (2, 1),
-    (1, False): (0, 2),
-    (1, True): (0, 2),
-    (2, False): (0, 1),
-    (2, True): (0, 1),
-}
-
-# Front-facing quad sits ABOVE the halo strips so the cursor on the
-# visible face area always grabs the visible face, never accidentally
-# routes to a back-face halo strip in an adjacent screen region.
-_FACE_QUAD_FRONT_FACING_SELECT_BIAS: float = 1.5
-_FACE_QUAD_HALO_FRAME_SELECT_BIAS: float = 1.0
-
-# Target halo-strip thickness in screen pixels. The world-space margin
-# is recomputed per frame so the rim stays a roughly constant on-screen
-# size regardless of viewport zoom.
-_FACE_QUAD_HALO_TARGET_PIXELS: float = 20.0
-
-# Minimum world half-extent a face resize may shrink to. Stops a drag
-# from collapsing the host to zero or negative scale.
-_MIN_HALF_EXTENT: float = 1e-4
-
-
-# ---------------------------------------------------------------------------
-# Pure predicates (testable without Blender)
-# ---------------------------------------------------------------------------
-
-Vec3 = tuple[float, float, float]
-
-
-def face_outward_axis_local(axis: int, is_max: bool) -> Vec3:
-    """Un-rotated outward face normal in the box's local AABB coords.
-
-    For ``(axis=0, is_max=True)`` returns ``(+1, 0, 0)``; for the −X
-    face ``(-1, 0, 0)``; etc. The rotated world normal is obtained by
-    applying the host's rotation and the OBB rotation:
-    ``mw_rot @ cage_rotation @ this``.
-    """
-    sign = 1.0 if is_max else -1.0
-    out = [0.0, 0.0, 0.0]
-    out[axis] = sign
-    return (out[0], out[1], out[2])
-
-
-def front_facing_face_mask(
-    face_normals_world: Sequence[Vec3],
-    view_dir_world: Vec3,
-    eps: float = 1e-6,
-) -> tuple[bool, ...]:
-    """Which of the 6 box faces point toward the camera.
-
-    A face is front-facing iff its outward normal points AGAINST the
-    view direction (``dot(normal, view_dir) < -eps``). The ``-eps``
-    margin prevents flicker at grazing angles.
-
-    ``face_normals_world`` must be in :data:`FACE_ROUTES` order; returns
-    a 6-tuple of bool parallel to that order.
-    """
-    if len(face_normals_world) != 6:
-        msg = f"expected 6 face normals, got {len(face_normals_world)}"
-        raise ValueError(msg)
-    vx, vy, vz = view_dir_world
-    return tuple((n[0] * vx + n[1] * vy + n[2] * vz) < -eps for n in face_normals_world)
-
-
-def view_axis_parallel_face_mask(
-    face_normals_world: Sequence[Vec3],
-    view_dir_world: Vec3,
-    threshold: float = 0.95,
-) -> tuple[bool, ...]:
-    """Which faces have normals (anti-)parallel to the view direction.
-
-    True iff ``abs(dot(normal, view_dir)) >= threshold`` — i.e. the
-    face is nearly perpendicular to the screen plane. Provided as a
-    pure predicate for callers that want to detect degenerate-drag
-    conditions; the layout helper itself no longer gates on it.
-    """
-    if len(face_normals_world) != 6:
-        msg = f"expected 6 face normals, got {len(face_normals_world)}"
-        raise ValueError(msg)
-    vx, vy, vz = view_dir_world
-    return tuple(abs(n[0] * vx + n[1] * vy + n[2] * vz) >= threshold for n in face_normals_world)
-
-
-# ---------------------------------------------------------------------------
-# Pure resize arithmetic
-# ---------------------------------------------------------------------------
-
-
-def compute_face_resize(
-    *,
-    value: float,
-    init_world_half: float,
-    init_location: tuple[float, float, float],
-    world_axis: tuple[float, float, float],
-    display_size: float,
-) -> tuple[float, tuple[float, float, float]]:
-    """Pure one-sided face-resize arithmetic.
-
-    Returns ``(new_scale_axis, new_location)`` — the host's new scale
-    on the dragged axis and its new world origin — such that the
-    dragged face moves by the modal's outward delta while the OPPOSITE
-    face stays put.
-
-    ``value`` is ``init + delta``, where ``init`` is the unsigned
-    drag-start world half-extent and ``delta`` is the cursor projection
-    onto the face's OUTWARD world normal. Realized half-extent is
-    clamped to a small floor; the location shift uses the realized
-    (post-clamp) delta so the opposite face stays fixed even at the
-    clamp.
-    """
-    face_delta = value - init_world_half
-    new_world_half = init_world_half + 0.5 * face_delta
-    if new_world_half < _MIN_HALF_EXTENT:
-        new_world_half = _MIN_HALF_EXTENT
-    realized_delta = 2.0 * (new_world_half - init_world_half)
-
-    ds = display_size if display_size != 0.0 else 1.0
-    new_scale_axis = new_world_half / ds
-    shift = 0.5 * realized_delta
-    new_location = (
-        init_location[0] + shift * world_axis[0],
-        init_location[1] + shift * world_axis[1],
-        init_location[2] + shift * world_axis[2],
-    )
-    return new_scale_axis, new_location
-
-
-# ---------------------------------------------------------------------------
-# Internal geometry helpers
-# ---------------------------------------------------------------------------
-
-
-def _compute_face_quad_scale(bmin: Any, bmax: Any, axis: int, is_max: bool) -> tuple[float, float]:
-    """Return ``(w, h)`` for the face quad's scale matrix."""
-    w_axis, h_axis = _QUAD_PERP_AXES[(axis, is_max)]
-    w = float(bmax[w_axis] - bmin[w_axis])
-    h = float(bmax[h_axis] - bmin[h_axis])
-    return w, h
-
-
-def _shared_edge_corner_keys(
-    axis_a: int, is_max_a: bool, axis_b: int, is_max_b: bool
-) -> tuple[tuple[int, int, int], tuple[int, int, int]] | None:
-    """Return the 2 corner-bit triples shared by two adjacent faces.
-
-    Corner keys are 3-tuples of bits (0 = bmin, 1 = bmax). The two
-    returned corners are ordered with the free-axis bit ascending.
-    """
-    if axis_a == axis_b:
-        return None
-    free_axis = 3 - axis_a - axis_b
-    bit_a = 1 if is_max_a else 0
-    bit_b = 1 if is_max_b else 0
-    corner_lo = [0, 0, 0]
-    corner_hi = [0, 0, 0]
-    corner_lo[axis_a] = bit_a
-    corner_hi[axis_a] = bit_a
-    corner_lo[axis_b] = bit_b
-    corner_hi[axis_b] = bit_b
-    corner_lo[free_axis] = 0
-    corner_hi[free_axis] = 1
-    return (
-        (corner_lo[0], corner_lo[1], corner_lo[2]),
-        (corner_hi[0], corner_hi[1], corner_hi[2]),
-    )
-
-
-def _face_corner_keys(axis: int, is_max: bool) -> tuple[
-    tuple[int, int, int],
-    tuple[int, int, int],
-    tuple[int, int, int],
-    tuple[int, int, int],
-]:
-    """Return the 4 corner-bit triples of a face in CCW order.
-
-    Triangulation as ``[(0,1,2), (0,2,3)]`` covers the whole face with
-    two non-overlapping triangles.
-    """
-    fixed_bit = 1 if is_max else 0
-    free_axes = [a for a in (0, 1, 2) if a != axis]
-    fa0, fa1 = free_axes
-    corners = []
-    for ka, kb in ((0, 0), (1, 0), (1, 1), (0, 1)):
-        key = [0, 0, 0]
-        key[axis] = fixed_bit
-        key[fa0] = ka
-        key[fa1] = kb
-        corners.append((key[0], key[1], key[2]))
-    return (corners[0], corners[1], corners[2], corners[3])
-
-
-def _build_strip_tris_relative(
-    edge_p0_local: tuple[float, float, float],
-    edge_p1_local: tuple[float, float, float],
-    extrusion_local: tuple[float, float, float],
-) -> list[tuple[float, float, float]]:
-    """Build two CCW triangles (6 vertices) for a thin halo strip.
-
-    All inputs are in coords relative to the gizmo's ``matrix_basis``
-    anchor. The strip runs along ``[edge_p0_local, edge_p1_local]`` and
-    extrudes by ``extrusion_local`` perpendicular to the edge.
-    """
-    p0x, p0y, p0z = edge_p0_local
-    p1x, p1y, p1z = edge_p1_local
-    ex, ey, ez = extrusion_local
-    p0e = (p0x + ex, p0y + ey, p0z + ez)
-    p1e = (p1x + ex, p1y + ey, p1z + ez)
-    return [
-        (p0x, p0y, p0z),
-        p0e,
-        p1e,
-        (p0x, p0y, p0z),
-        p1e,
-        (p1x, p1y, p1z),
-    ]
-
-
-def _strips_geometry_changed(quad_gz, face_quad_local, all_tris) -> bool:
-    """True if the back-face quad's geometry differs from the cached upload.
-
-    Pure orbit/pan doesn't change either the box pose or the cage
-    rotation, so the computed strip vertices are byte-identical to the
-    previous frame's. Hitting the cache lets the back-facing branch
-    skip ``new_custom_shape`` and the GPU upload.
-    """
-    cached = getattr(quad_gz, "_strips_cache_key", None)
-    last_state = getattr(quad_gz, "_last_geometry_state", None)
-    key = (face_quad_local, all_tris)
-    if cached is None or last_state != "strips" or cached != key:
-        quad_gz._strips_cache_key = key
-        quad_gz._last_geometry_state = "strips"
-        return True
-    return False
-
-
-def _compute_face_basis(
-    mw: Any,
-    mw_rot: Any,
-    cage_rotation: Any,
-    pivot_local: Any,
-    face_local: Any,
-    orient: Any,
-) -> tuple[Any, Any]:
-    """World-space (translation, outward-normal-direction) for one face."""
-    rotated_face_local = cage_rotation.to_3x3() @ (face_local - pivot_local) + pivot_local
-    face_world = mw @ rotated_face_local
-    world_axis = (mw_rot @ cage_rotation.to_3x3() @ (orient.to_3x3() @ Vector((0.0, 0.0, 1.0)))).normalized()
-    return face_world, world_axis
-
-
-def _compose_face_matrix_basis(
-    face_world: Any,
-    mw_rot_scale: Any,
-    cage_rotation: Any,
-    orient: Any,
-    w: float,
-    h: float,
-) -> Any:
-    """Compose the 5-term ``matrix_basis`` for a face-plane gizmo.
-
-    Returns ``Translation @ mw_rot_scale @ cage_rotation @ orient @
-    Diagonal((w, h, 1, 1))`` — maps a unit-square local quad onto the
-    world-space face rectangle, including the host's scale.
-    """
-    quad_scale = Matrix.Diagonal((w, h, 1.0, 1.0))
-    return Matrix.Translation(face_world) @ mw_rot_scale.to_4x4() @ cage_rotation @ orient @ quad_scale
-
-
-def _compute_box_corners_world(
-    bmin: Any,
-    bmax: Any,
-    pivot_local: Any,
-    cage_rotation_3x3: Any,
-    mw: Any,
-) -> dict[tuple[int, int, int], Any]:
-    """Return the 8 OBB corners in world space, keyed by bit-triple."""
-    corners: dict[tuple[int, int, int], Any] = {}
-    for ix in (0, 1):
-        for iy in (0, 1):
-            for iz in (0, 1):
-                local = Vector(
-                    (
-                        float(bmax.x if ix else bmin.x),
-                        float(bmax.y if iy else bmin.y),
-                        float(bmax.z if iz else bmin.z),
-                    )
-                )
-                rotated = cage_rotation_3x3 @ (local - pivot_local) + pivot_local
-                corners[(ix, iy, iz)] = mw @ rotated
-    return corners
-
-
-def _abs_scale_matrix(mw: Any) -> Any:
-    """Return a copy of ``mw`` with all scale components ``abs()``-ed.
-
-    Without this, a negative-scale host produces a visible/clickable
-    face inversion: ``mw @ local_vec`` flips the +axis face onto the
-    -axis world side, while the rotation-only normal stays pointing
-    in the +axis direction — so the gizmo for "the +X face" sits at
-    world -X but reports its outward normal as +X.
-    """
-    loc, rot, scale = mw.decompose()
-    abs_scale = Vector((abs(scale.x), abs(scale.y), abs(scale.z)))
-    return Matrix.LocRotScale(loc, rot, abs_scale)
-
-
-def _world_radius_to_screen_pixels(
-    region: Any,
-    rv3d: Any,
-    center_world: Vector,
-    world_radius: float,
-    *,
-    min_pixels: float = 0.0,
-) -> float:
-    """Return the on-screen pixel radius of a world-space circle.
-
-    Projects ``center_world`` and a sample point offset by
-    ``world_radius`` along the camera's view-aligned right axis to
-    region pixels, and returns the screen-pixel distance between them.
-    Falls back to ``min_pixels`` if either projection fails.
-    """
-    try:
-        view_inv = rv3d.view_matrix.inverted()
-        right = Vector((view_inv[0][0], view_inv[0][1], view_inv[0][2])).normalized()
-    except (AttributeError, ValueError):
-        right = Vector((1.0, 0.0, 0.0))
-    sample_world = center_world + right * world_radius
-    return _world_segment_to_screen_pixels(region, rv3d, center_world, sample_world, min_pixels=min_pixels)
-
-
-def _world_segment_to_screen_pixels(
-    region: Any,
-    rv3d: Any,
-    p0_world: Vector,
-    p1_world: Vector,
-    *,
-    min_pixels: float = 0.0,
-) -> float:
-    """Return the on-screen pixel length of an arbitrary world segment.
-
-    Unlike :func:`_world_radius_to_screen_pixels`, this measures the
-    ACTUAL projected length of the segment — foreshortening included.
-    Use this when the segment direction is known to be oblique to the
-    screen plane (e.g. a back face's outward normal): a perpendicular
-    radius measurement overestimates the on-screen length, leaving
-    halo strips visually narrower than the requested pixel target.
-    """
-    p0 = location_3d_to_region_2d(region, rv3d, p0_world)
-    p1 = location_3d_to_region_2d(region, rv3d, p1_world)
-    if not p0 or not p1:
-        return min_pixels
-    dx = float(p1[0]) - float(p0[0])
-    dy = float(p1[1]) - float(p0[1])
-    return max(min_pixels, (dx * dx + dy * dy) ** 0.5)
-
-
-# ---------------------------------------------------------------------------
-# Gizmo classes
-# ---------------------------------------------------------------------------
-
-
-class BIM_GT_box_face_quad(bpy.types.Gizmo):  # noqa: N801 — Blender bl_idname convention
-    """Near-invisible face-quad click target with drag-to-resize modal.
-
-    Geometry: a unit quad in the local XY plane at z=0. The adapter
-    group's layout helper rotates and scales it onto the face plane;
-    the quad is welded to the world face (``use_draw_scale = False``).
-    """
-
-    bl_idname = "BIM_GT_box_face_quad"
-    bl_target_properties = ({"id": "offset", "type": "FLOAT", "array_length": 1},)
-
-    __slots__ = (
-        "custom_shape",
-        "custom_shape_select",
-        "init_value",
-        "move_get_cb",
-        "move_set_cb",
-        "axis",
-        "start_location",
-        "depth_point",
-        "callback",
-        "ctrl_click_cb",
-        "_group",
-        "_face_axis",
-        "is_max",
-        "_drag_snapshot",
-        "_last_geometry_state",
-        "_strips_cache_key",
-    )
-
-    def draw(self, context: Any) -> None:
-        self.draw_custom_shape(self.custom_shape)
-
-    def draw_select(self, context: Any, select_id: int) -> None:
-        # Back-facing quads bind ``custom_shape_select`` to the halo-strip
-        # TRIS so clicks OUTSIDE the box silhouette catch the back face.
-        # Front-facing quads leave it None and reuse ``custom_shape``.
-        shape = getattr(self, "custom_shape_select", None) or self.custom_shape
-        self.draw_custom_shape(shape, select_id=select_id)
-
-    def setup(self) -> None:
-        if not hasattr(self, "custom_shape_"):
-            self.custom_shape = self.new_custom_shape("TRIS", _QUAD_TRIS)
-        self.custom_shape_select = None
-        # Quad welded to world geometry — clicks must align with the
-        # visible face, not a screen-size widget. Disables Blender's
-        # per-frame pixel-constant autoscale.
-        self.use_draw_scale = False
-
-    # ---- modal -------------------------------------------------------------
-
-    def invoke(self, context: Any, event: Any) -> set[str]:
-        # CTRL+click handoff: dispatch a host-defined callback (e.g.
-        # align-view) instead of starting a drag.
-        if event.ctrl and getattr(self, "ctrl_click_cb", None) is not None:
-            self.ctrl_click_cb(context, event)
-            return {"FINISHED"}
-
-        region = context.region
-        rv3d = context.region_data
-        if region is None or rv3d is None:
-            return {"CANCELLED"}
-        self.init_value = self.move_get_cb()
-        # Freeze the projection plane at invoke — projection-plane
-        # drift on tilted axes causes exponential delta runaway.
-        self.depth_point = self.matrix_basis.translation.copy()
-        self.start_location = region_2d_to_location_3d(region, rv3d, (event.mouse_x, event.mouse_y), self.depth_point)
-
-        if getattr(self, "_group", None) is not None:
-            self._group._lock_for(self)
-        return {"RUNNING_MODAL"}
-
-    def exit(self, context: Any, cancel: bool) -> None:
-        try:
-            if context.area:
-                context.area.header_text_set(None)
-            if cancel:
-                self.move_set_cb(self.init_value)
-            if hasattr(self, "callback"):
-                self.callback(self.move_get_cb())
-        finally:
-            self._drag_snapshot = None
-            if getattr(self, "_group", None) is not None:
-                self._group._unlock_all()
-
-    def modal(self, context: Any, event: Any, tweak: set[str]) -> set[str]:
-        if event.type == "ESC":
-            return {"CANCELLED"}
-        region = context.region
-        rv3d = context.region_data
-        if region is None or rv3d is None:
-            return {"CANCELLED"}
-        end_location = region_2d_to_location_3d(region, rv3d, (event.mouse_x, event.mouse_y), self.depth_point)
-        delta = (end_location - self.start_location).dot(self.axis)
-        if "SNAP" in tweak:
-            delta = round(delta, 1)
-        if "PRECISE" in tweak:
-            delta /= 10.0
-        self.move_set_cb(self.init_value + delta)
-        if context.area:
-            context.area.header_text_set(f"Value: {self.move_get_cb():.3f} ({delta:.3f})")
-        return {"RUNNING_MODAL"}
-
-
-class BIM_GT_box_face_outline(bpy.types.Gizmo):  # noqa: N801 — Blender bl_idname convention
-    """Thin non-interactive colored edge outline for one face.
-
-    Drawn as 4 line segments in the face plane. The layout helper
-    toggles its ``alpha`` between near-zero and ``1.0`` based on the
-    sibling face-quad's ``is_highlight`` state — so hovering the quad
-    lights up the matching outline. ``hide_select = True`` keeps the
-    outline out of the GPU selection buffer.
-    """
-
-    bl_idname = "BIM_GT_box_face_outline"
-    bl_target_properties = ()
-
-    __slots__ = (
-        "custom_shape",
-        "_face_axis",
-        "is_max",
-        "_last_outline_state",
-    )
-
-    def draw(self, context: Any) -> None:
-        self.draw_custom_shape(self.custom_shape)
-
-    def draw_select(self, context: Any, select_id: int) -> None:
-        return None
-
-    def setup(self) -> None:
-        if not hasattr(self, "custom_shape_"):
-            self.custom_shape = self.new_custom_shape("LINES", _QUAD_OUTLINE_LINES)
-        self.use_draw_scale = False
-        self.hide_select = True
-        self._last_outline_state = "unit"
-
-
-# ---------------------------------------------------------------------------
-# Per-redraw orchestrator
-# ---------------------------------------------------------------------------
-
-
-def apply_face_quad_layout(
-    *,
-    quad_gizmos,
-    outline_gizmos,
-    bmin: Any,
-    bmax: Any,
-    matrix_world: Any,
-    cage_rotation: Any,
-    region: Any,
-    rv3d: Any,
-    locked: bool,
-) -> None:
-    """Lay out 6 face quads + 6 outlines on the box for this redraw.
-
-    ``quad_gizmos`` / ``outline_gizmos`` are length-6 sequences in
-    :data:`FACE_ROUTES` order. ``bmin`` / ``bmax`` are the box corners
-    in the host's local frame; ``matrix_world`` is the host's world
-    matrix; ``cage_rotation`` is the OBB rotation as a 4x4 (use
-    ``Matrix.Identity(4)`` when rotation rides in ``matrix_world``).
-    ``region`` / ``rv3d`` drive the view-dependent front/back split and
-    the screen-constant halo margin; passing ``rv3d = None`` bails.
-
-    Negative scale on the host is normalized to positive internally so
-    the visible cube and the clickable face gizmos stay aligned —
-    callers don't need to pre-process ``matrix_world``.
-
-    When ``locked`` (a drag is active), ``hide`` / ``select_bias``
-    writes are skipped — the active quad's geometry is still refreshed
-    so it tracks the moving box.
-    """
-    if rv3d is None or getattr(rv3d, "view_rotation", None) is None:
-        return
-    if len(quad_gizmos) != 6 or len(outline_gizmos) != 6:
-        return
-
-    mw = _abs_scale_matrix(matrix_world)
-    mw_rot = mw.to_quaternion().to_matrix()
-    mw_rot_scale = mw.to_3x3()
-    cage_rotation_3x3 = cage_rotation.to_3x3()
-    pivot_local = (bmin + bmax) * 0.5
-    box_center_local = pivot_local
-    face_midpoints_local = {
-        (0, False): Vector((float(bmin.x), box_center_local.y, box_center_local.z)),
-        (0, True): Vector((float(bmax.x), box_center_local.y, box_center_local.z)),
-        (1, False): Vector((box_center_local.x, float(bmin.y), box_center_local.z)),
-        (1, True): Vector((box_center_local.x, float(bmax.y), box_center_local.z)),
-        (2, False): Vector((box_center_local.x, box_center_local.y, float(bmin.z))),
-        (2, True): Vector((box_center_local.x, box_center_local.y, float(bmax.z))),
-    }
-
-    view_dir = (rv3d.view_rotation @ Vector((0.0, 0.0, -1.0))).normalized()
-    view_dir_tuple = (float(view_dir.x), float(view_dir.y), float(view_dir.z))
-    face_normals_world = []
-    for route_axis, route_is_max in FACE_ROUTES:
-        axis_local = Vector(face_outward_axis_local(route_axis, route_is_max))
-        n_world = (mw_rot @ cage_rotation_3x3 @ axis_local).normalized()
-        face_normals_world.append((float(n_world.x), float(n_world.y), float(n_world.z)))
-    front = front_facing_face_mask(tuple(face_normals_world), view_dir_tuple)
-
-    box_center_world = mw @ pivot_local
-    corners_world = _compute_box_corners_world(bmin, bmax, pivot_local, cage_rotation_3x3, mw)
-    route_to_index = {route: i for i, route in enumerate(FACE_ROUTES)}
-
-    for i, route in enumerate(FACE_ROUTES):
-        quad_gz = quad_gizmos[i]
-        is_front = front[i]
-        axis_b, is_max_b = route
-
-        # Place the colored OUTLINE on every face using the same composed
-        # face matrix the front-facing solid quad uses. Hidden/shown via
-        # alpha at the end of the pass.
-        outline_orient = _AXIS_ORIENT[route]
-        outline_face_world, _outline_axis = _compute_face_basis(
-            mw,
-            mw_rot,
-            cage_rotation,
-            pivot_local,
-            face_midpoints_local[route],
-            outline_orient,
-        )
-        ow, oh = _compute_face_quad_scale(bmin, bmax, axis_b, is_max_b)
-        outline_gizmos[i].matrix_basis = _compose_face_matrix_basis(
-            outline_face_world, mw_rot_scale, cage_rotation, outline_orient, ow, oh
-        )
-
-        if is_front:
-            if not locked:
-                quad_gz.hide = False
-                quad_gz.select_bias = _FACE_QUAD_FRONT_FACING_SELECT_BIAS
-            orient = _AXIS_ORIENT[route]
-            face_world, world_axis = _compute_face_basis(
-                mw,
-                mw_rot,
-                cage_rotation,
-                pivot_local,
-                face_midpoints_local[route],
-                orient,
-            )
-            w, h = _compute_face_quad_scale(bmin, bmax, axis_b, is_max_b)
-            quad_gz.matrix_basis = _compose_face_matrix_basis(face_world, mw_rot_scale, cage_rotation, orient, w, h)
-            quad_gz.axis = world_axis
-            if getattr(quad_gz, "_last_geometry_state", None) != "solid":
-                quad_gz.custom_shape = quad_gz.new_custom_shape("TRIS", _QUAD_TRIS)
-                quad_gz.custom_shape_select = None
-                quad_gz._last_geometry_state = "solid"
-            continue
-
-        # Back-facing: anchor at the back face centre; build halo strips
-        # in the planes of the adjacent FRONT faces, extruded outside
-        # the silhouette toward this face's outward normal.
-        face_world = mw @ (cage_rotation_3x3 @ (face_midpoints_local[route] - pivot_local) + pivot_local)
-        quad_gz.matrix_basis = Matrix.Translation(face_world)
-        quad_gz.axis = (mw_rot @ cage_rotation_3x3 @ Vector(face_outward_axis_local(axis_b, is_max_b))).normalized()
-
-        adjacent_front_routes = [
-            (axis_a, is_max_a)
-            for axis_a in range(3)
-            if axis_a != axis_b
-            for is_max_a in (False, True)
-            if front[route_to_index[(axis_a, is_max_a)]]
-        ]
-        # Per-face world margin: measure the screen-projected length of
-        # ONE world unit along THIS face's outward normal. The world
-        # margin that yields ~N pixels on screen is then ``N / length``.
-        # Foreshortening on oblique faces shortens the projected step,
-        # so the world step must grow to keep the strip the same width
-        # on screen.
-        face_world_margin = 0.0
-        if region is not None:
-            sample_end = box_center_world + quad_gz.axis * 1.0
-            screen_step = _world_segment_to_screen_pixels(region, rv3d, box_center_world, sample_end, min_pixels=0.0)
-            if screen_step > 0.0:
-                face_world_margin = _FACE_QUAD_HALO_TARGET_PIXELS / screen_step
-        if face_world_margin <= 0.0 or not adjacent_front_routes:
-            if not locked:
-                quad_gz.hide = True
-                quad_gz.select_bias = _FACE_QUAD_HALO_FRAME_SELECT_BIAS
-            if getattr(quad_gz, "_last_geometry_state", None) != "empty":
-                quad_gz.custom_shape = quad_gz.new_custom_shape("TRIS", _EMPTY_TRIS)
-                quad_gz.custom_shape_select = None
-                quad_gz._last_geometry_state = "empty"
-            continue
-
-        extrusion_world = quad_gz.axis * face_world_margin
-        extrusion_local = (
-            float(extrusion_world.x),
-            float(extrusion_world.y),
-            float(extrusion_world.z),
-        )
-        all_tris: list[tuple[float, float, float]] = []
-        for axis_a, is_max_a in adjacent_front_routes:
-            edge_keys = _shared_edge_corner_keys(axis_a, is_max_a, axis_b, is_max_b)
-            if edge_keys is None:
-                continue
-            key0, key1 = edge_keys
-            wp0 = corners_world[key0]
-            wp1 = corners_world[key1]
-            local_p0 = (
-                float(wp0.x - face_world.x),
-                float(wp0.y - face_world.y),
-                float(wp0.z - face_world.z),
-            )
-            local_p1 = (
-                float(wp1.x - face_world.x),
-                float(wp1.y - face_world.y),
-                float(wp1.z - face_world.z),
-            )
-            all_tris.extend(_build_strip_tris_relative(local_p0, local_p1, extrusion_local))
-
-        if not locked:
-            quad_gz.hide = False
-            quad_gz.select_bias = _FACE_QUAD_HALO_FRAME_SELECT_BIAS
-
-        corner_keys = _face_corner_keys(axis_b, is_max_b)
-        wc_local = [
-            (
-                float(corners_world[k].x - face_world.x),
-                float(corners_world[k].y - face_world.y),
-                float(corners_world[k].z - face_world.z),
-            )
-            for k in corner_keys
-        ]
-        face_quad_local = [
-            wc_local[0],
-            wc_local[1],
-            wc_local[2],
-            wc_local[0],
-            wc_local[2],
-            wc_local[3],
-        ]
-        if _strips_geometry_changed(quad_gz, tuple(face_quad_local), tuple(all_tris)):
-            quad_gz.custom_shape = quad_gz.new_custom_shape("TRIS", face_quad_local)
-            quad_gz.custom_shape_select = quad_gz.new_custom_shape("TRIS", all_tris)
-        quad_gz._last_geometry_state = "strips"
-
-    # Outline alpha follows ONLY the hovered quad's own state — light
-    # the outline of the face under the cursor, nothing else.
-    if not locked:
-        for outline_gz, quad_gz in zip(outline_gizmos, quad_gizmos, strict=True):
-            lit = bool(getattr(quad_gz, "is_highlight", False))
-            outline_gz.alpha = 1.0 if lit else 0.0
-            outline_gz.alpha_highlight = 1.0 if lit else 0.0
-
-
-__all__ = [
-    "AXIS_COLOR",
-    "FACE_QUAD_ALPHA",
-    "FACE_QUAD_ALPHA_HIGHLIGHT",
-    "FACE_QUAD_SELECT_BIAS",
-    "FACE_ROUTES",
-    "BIM_GT_box_face_outline",
-    "BIM_GT_box_face_quad",
-    "apply_face_quad_layout",
-    "compute_face_resize",
-    "face_outward_axis_local",
-    "front_facing_face_mask",
-    "view_axis_parallel_face_mask",
-]

src/bonsai/bonsai/bim/module/clip_box/gizmos.py

@@ -1,312 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-"""Interactive face-quad resize gizmos for the active clip box.
-
-Adapter group that binds the generic :mod:`face_quad` core to a Bonsai
-clip-box Empty: six near-invisible click quads + six edge outlines on
-the cube's faces. Dragging a face does a ONE-SIDED resize — the dragged
-face moves along its outward world normal while the opposite face stays
-put — by writing the empty's ``location`` and ``scale``. Bonsai's
-depsgraph handler then re-arms the clip planes from the new matrix.
-"""
-
-from __future__ import annotations
-
-import contextlib
-from typing import Any
-
-import bpy
-from mathutils import Matrix, Vector
-
-import bonsai.tool as tool
-
-from . import face_quad
-
-# Local-frame bounds of the empty's CUBE display. The display spans
-# ``[-empty_display_size, +empty_display_size]^3``; Bonsai always sets
-# ``empty_display_size = 1.0`` on clip-box hosts, so the local box is
-# the unit cube. The empty's per-axis scale + rotation + translation
-# ride in ``matrix_world``, which the layout helper applies.
-_LOCAL_BMIN = Vector((-1.0, -1.0, -1.0))
-_LOCAL_BMAX = Vector((1.0, 1.0, 1.0))
-
-
-def _world_axis(empty: bpy.types.Object, axis: int, is_max: bool) -> Vector:
-    """Outward world-space unit normal of the ``(axis, is_max)`` face.
-
-    Uses the rotation-only matrix so a negative-scale empty doesn't
-    flip the resulting direction — the visible "+X face" then stays
-    associated with world +X (transformed through rotation).
-    """
-    rot_mat = empty.matrix_world.to_quaternion().to_matrix()
-    n = Vector(rot_mat.col[axis])
-    if n.length <= 0.0:
-        return Vector((0.0, 0.0, 0.0))
-    n.normalize()
-    return n if is_max else -n
-
-
-def _world_half_extent(empty: bpy.types.Object, axis: int) -> float:
-    """The empty's box half-extent along local ``axis`` in WORLD units.
-
-    A CUBE empty's local cube is ``±empty_display_size``; ``matrix_world``
-    stretches it by the column length on ``axis``. So the world
-    half-extent is ``|column[axis]| * empty_display_size``.
-    """
-    col_len = empty.matrix_world.to_3x3().col[axis].length
-    display_size = abs(float(getattr(empty, "empty_display_size", 1.0) or 1.0))
-    return float(col_len) * display_size
-
-
-def _make_face_get_cb(gz: Any, group: Any, axis: int, is_max: bool):
-    """Closure returning the world half-extent at drag start and
-    snapshotting the empty's full transform on the gizmo instance.
-
-    The snapshot lives on the gizmo (not the group) so a PERSISTENT
-    group servicing multiple clip boxes can't bleed one drag's state
-    onto another. Cleared on ``exit`` by the shared face-quad hook.
-    """
-
-    def getter() -> float:
-        empty = group._empty
-        if empty is None:
-            return 0.0
-        existing = getattr(gz, "_drag_snapshot", None)
-        if existing is not None and existing.get("empty_name") == getattr(empty, "name", None):
-            return float(existing["world_half"])
-
-        world_half = _world_half_extent(empty, axis)
-        display_size = abs(float(getattr(empty, "empty_display_size", 1.0) or 1.0))
-        gz._drag_snapshot = {
-            "empty_name": getattr(empty, "name", None),
-            "world_half": world_half,
-            "location": tuple(float(v) for v in empty.location),
-            "scale": tuple(float(v) for v in empty.scale),
-            "display_size": display_size if display_size != 0.0 else 1.0,
-            "world_axis": tuple(_world_axis(empty, axis, is_max)),
-        }
-        return float(world_half)
-
-    return getter
-
-
-def _make_ctrl_click_cb(axis: int, is_max: bool):
-    """Closure that dispatches CTRL+click on a face to the align-view operator.
-
-    Routing through an operator (rather than mutating ``rv3d`` here)
-    keeps the action F3-searchable and undoable.
-    """
-
-    def _callback(_context: Any, _event: Any) -> None:
-        bpy.ops.bim.align_view_to_clip_face("INVOKE_DEFAULT", axis=axis, is_max=is_max)
-
-    return _callback
-
-
-def _make_face_set_cb(gz: Any, group: Any, axis: int, is_max: bool):
-    """Closure that applies a one-sided face resize by writing the
-    empty's ``location`` + ``scale``.
-
-    The modal calls this with ``value = init + delta`` where ``delta``
-    is the cursor's projection onto the face's OUTWARD world normal.
-    Both reads come from ``gz._drag_snapshot`` so every frame is
-    relative to drag start, never compounding.
-    """
-    del is_max  # snapshot's world_axis carries the direction
-
-    def setter(value: float) -> None:
-        empty = group._empty
-        if empty is None:
-            return
-        snap = getattr(gz, "_drag_snapshot", None)
-        if snap is None or snap.get("empty_name") != getattr(empty, "name", None):
-            return
-
-        new_scale_axis, new_location = face_quad.compute_face_resize(
-            value=value,
-            init_world_half=snap["world_half"],
-            init_location=snap["location"],
-            world_axis=snap["world_axis"],
-            display_size=snap["display_size"],
-        )
-        new_scale = list(snap["scale"])
-        # Preserve the sign of the original scale so a user-flipped empty
-        # stays flipped after the resize — compute_face_resize returns a
-        # positive magnitude, the sign is the user's intent to keep.
-        sign = -1.0 if snap["scale"][axis] < 0.0 else 1.0
-        new_scale[axis] = sign * new_scale_axis
-
-        empty.scale = new_scale
-        empty.location = Vector(new_location)
-
-    return setter
-
-
-class OBJECT_GGT_bim_clip_box(bpy.types.GizmoGroup):  # noqa: N801 — Blender bl_idname convention
-    """Face-quad resize handles on the active clip box.
-
-    Renders six near-invisible click-target quads and six colored edge
-    outlines on the active clip-box empty whenever clipping is enabled.
-    Click-and-drag a face to resize one-sided; the opposite face stays
-    put. CTRL+click and plain click fall through to selection.
-    """
-
-    bl_idname = "OBJECT_GGT_bim_clip_box"
-    bl_label = "Bonsai Clip Box Faces"
-    bl_space_type = "VIEW_3D"
-    bl_region_type = "WINDOW"
-    bl_options = {"3D", "PERSISTENT", "SHOW_MODAL_ALL"}
-
-    @classmethod
-    def poll(cls, context: Any) -> bool:
-        scene = getattr(context, "scene", None)
-        if scene is None:
-            return False
-        scene_props = tool.ClipBox.get_scene_props(scene)
-        if not scene_props.enabled or not scene_props.enable_gizmos:
-            return False
-        active_clip_box = tool.ClipBox.get_active_clip_box(scene)
-        if active_clip_box is None:
-            return False
-        # Only render when the user has the active clip box itself
-        # selected — otherwise the face handles would intercept clicks
-        # meant for the geometry behind them.
-        return getattr(context, "active_object", None) is active_clip_box
-
-    @classmethod
-    def setup_keymap(cls, keyconfig):
-        # Bind CLICK_DRAG so plain LEFTMOUSE PRESS passes through to
-        # selection — the user can still click through a near-invisible
-        # face quad to pick a mesh behind it.
-        km = keyconfig.keymaps.new(
-            name=cls.bl_idname,
-            space_type=cls.bl_space_type,
-            region_type=cls.bl_region_type,
-        )
-        km.keymap_items.new("gizmogroup.gizmo_tweak", type="LEFTMOUSE", value="CLICK_DRAG")
-        km.keymap_items.new("gizmogroup.gizmo_tweak", type="LEFTMOUSE", value="PRESS", ctrl=True)
-        return km
-
-    def setup(self, context: Any) -> None:
-        # ``_empty`` is resolved each refresh so the PERSISTENT group
-        # follows whichever clip box is active in the scene PG.
-        self._empty: bpy.types.Object | None = None
-        self._locked = False
-        self._face_routes: list[tuple[int, bool]] = []
-
-        for axis, is_max in face_quad.FACE_ROUTES:
-            gz = self.gizmos.new(face_quad.BIM_GT_box_face_quad.bl_idname)
-            gz._group = self
-            gz._face_axis = axis
-            gz.is_max = is_max
-            gz._drag_snapshot = None
-            gz._last_geometry_state = "solid"
-            gz._strips_cache_key = None
-            gz.color = face_quad.AXIS_COLOR[axis]
-            gz.color_highlight = tuple(min(1.0, c + 0.3) for c in face_quad.AXIS_COLOR[axis])
-            gz.alpha = face_quad.FACE_QUAD_ALPHA
-            gz.alpha_highlight = face_quad.FACE_QUAD_ALPHA_HIGHLIGHT
-            gz.use_draw_modal = True
-            gz.scale_basis = 1.0
-            gz.select_bias = face_quad.FACE_QUAD_SELECT_BIAS
-            gz.move_get_cb = _make_face_get_cb(gz, self, axis, is_max)
-            gz.move_set_cb = _make_face_set_cb(gz, self, axis, is_max)
-            # CTRL+click on a face aligns the viewport to look at it.
-            gz.ctrl_click_cb = _make_ctrl_click_cb(axis, is_max)
-            self._face_routes.append((axis, is_max))
-
-        # Outlines added last so they composite on top of the quad
-        # fills (Blender draws gizmos in creation order).
-        for axis, is_max in face_quad.FACE_ROUTES:
-            ol = self.gizmos.new(face_quad.BIM_GT_box_face_outline.bl_idname)
-            ol._face_axis = axis
-            ol.is_max = is_max
-            ol.color = face_quad.AXIS_COLOR[axis]
-            ol.color_highlight = face_quad.AXIS_COLOR[axis]
-            ol.alpha = 0.0
-            ol.alpha_highlight = 0.0
-            ol.line_width = 2.5
-
-    def _quad_gizmos(self):
-        return self.gizmos[: len(self._face_routes)]
-
-    def _outline_gizmos(self):
-        n = len(self._face_routes)
-        return self.gizmos[n : 2 * n]
-
-    def refresh(self, context: Any) -> None:
-        """State-change path: resolve the active empty, then run the
-        shared face-quad layout so the quads aren't stale for a frame
-        after a selection or active-index change."""
-        empty = tool.ClipBox.get_active_clip_box(context.scene)
-        self._empty = empty
-        if empty is None:
-            for gz in self.gizmos:
-                gz.hide = True
-            return
-        self._layout(context, empty)
-
-    def draw_prepare(self, context: Any) -> None:
-        """Per-redraw — fires on orbit — re-run the layout so the
-        front/back split, halo strips, and outline highlights track
-        the camera and any live G/R/S on the empty."""
-        empty = self._empty
-        if empty is None:
-            return
-        self._layout(context, empty)
-
-    def _layout(self, context: Any, empty: bpy.types.Object) -> None:
-        face_quad.apply_face_quad_layout(
-            quad_gizmos=self._quad_gizmos(),
-            outline_gizmos=self._outline_gizmos(),
-            bmin=_LOCAL_BMIN,
-            bmax=_LOCAL_BMAX,
-            matrix_world=empty.matrix_world,
-            # The empty's rotation rides in matrix_world, so the
-            # box-local OBB rotation is identity.
-            cage_rotation=Matrix.Identity(4),
-            region=getattr(context, "region", None),
-            rv3d=getattr(context, "region_data", None),
-            locked=self._locked,
-        )
-
-    # ---- mutual exclusion (lock siblings during a drag) ------------------
-
-    def _lock_for(self, active_gizmo) -> None:
-        self._locked = True
-        for gz in self.gizmos:
-            if gz is not active_gizmo:
-                with contextlib.suppress(ReferenceError, RuntimeError):
-                    gz.hide = True
-
-    def _unlock_all(self) -> None:
-        self._locked = False
-        for gz in self.gizmos:
-            with contextlib.suppress(ReferenceError, RuntimeError):
-                gz.hide = False
-        # Rebuild caps synchronously so the cross-section overlay
-        # re-forms the instant the user releases the handle, rather
-        # than waiting for the depsgraph's debounced rebuild path.
-        with contextlib.suppress(RuntimeError, ReferenceError):
-            tool.ClipBox.rebuild_caps_now()
-        # Push an undo step so the user can revert a face drag with Ctrl+Z.
-        with contextlib.suppress(RuntimeError):
-            bpy.ops.ed.undo_push(message="Resize Clip Box")

src/bonsai/bonsai/bim/module/clip_box/operator.py

@@ -1,294 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-import bpy
-from mathutils import Matrix, Vector
-
-import bonsai.tool as tool
-from bonsai.bim.helper import prop_with_search
-
-from . import data
-
-# NOTE: do NOT add ``from __future__ import annotations`` to this module.
-# PEP 563 stringifies the operator's EnumProperty class annotations, which
-# breaks any introspection that reads ``cls.__annotations__[name].keywords``
-# — including the enum-search helper that draws the search-button icon.
-
-CLIP_BOX_NAME = "ClipBox"
-
-# Display labels for the source-based picker, used for the menu entries and
-# the dialog title. The dict keys are the canonical source-kind identifiers.
-SOURCE_KIND_LABELS: dict[str, str] = {
-    "SPATIAL": "Spatial Element",
-    "CLASS": "Class",
-    "TYPE": "Type",
-    "MATERIAL": "Material",
-    "PROFILE": "Profile",
-    "DRAWING": "Drawing",
-    "STATUS": "Status",
-    "SYSTEM": "System",
-    "GROUP": "Group",
-    "ZONE": "Zone",
-}
-
-
-_SOURCE_ID_DISPATCH = {
-    "SPATIAL": data.spatial_items,
-    "CLASS": data.class_items,
-    "TYPE": data.type_items,
-    "MATERIAL": data.material_items,
-    "PROFILE": data.profile_items,
-    "DRAWING": data.drawing_items,
-    "STATUS": data.status_items,
-    "SYSTEM": data.system_items,
-    "GROUP": data.group_items,
-    "ZONE": data.zone_items,
-}
-
-
-def _source_id_items(self, context):
-    """Dispatch the ``source_id`` enum items based on the picked ``source_kind``."""
-    fn = _SOURCE_ID_DISPATCH.get(self.source_kind)
-    if fn is None:
-        return [(data.NO_OPTIONS_ID, "No options", "")]
-    return fn(self, context)
-
-
-def _source_display_name(kind, source_id):
-    """Human-readable name of the picked source, used in the clip-box name."""
-    if kind == "STATUS":
-        return next((label for value, label in data.STATUS_LABELS if value == source_id), source_id)
-    if kind == "CLASS":
-        # source_id IS the human-readable IFC class name.
-        return source_id
-    ifc = tool.Ifc.get()
-    if ifc is None:
-        return source_id
-    try:
-        entity = ifc.by_id(int(source_id))
-    except (TypeError, ValueError, RuntimeError):
-        return source_id
-    return (getattr(entity, "Name", None) or "Unnamed").strip() or "Unnamed"
-
-
-class BIM_OT_align_view_to_clip_face(bpy.types.Operator):
-    bl_idname = "bim.align_view_to_clip_face"
-    bl_label = "Align View to Clip Box Face"
-    bl_description = "Orient the 3D viewport to look directly at the picked clip-box face"
-    bl_options = {"REGISTER"}
-
-    axis: bpy.props.IntProperty(default=0, options={"SKIP_SAVE"})
-    is_max: bpy.props.BoolProperty(default=True, options={"SKIP_SAVE"})
-
-    def execute(self, context):
-        rv3d = getattr(context, "region_data", None)
-        if rv3d is None:
-            return {"CANCELLED"}
-        clip_box = tool.ClipBox.get_active_clip_box(context.scene)
-        if clip_box is None:
-            return {"CANCELLED"}
-        rot_mat = clip_box.matrix_world.to_quaternion().to_matrix()
-        outward_local = Vector((0.0, 0.0, 0.0))
-        outward_local[self.axis] = 1.0 if self.is_max else -1.0
-        outward = (rot_mat @ outward_local).normalized()
-        if outward.length == 0.0:
-            return {"CANCELLED"}
-        up_world = (rot_mat @ _local_up_for_face(self.axis, self.is_max)).normalized()
-        rv3d.view_rotation = _view_rotation_from_forward_and_up(-outward, up_world)
-        return {"FINISHED"}
-
-
-def _local_up_for_face(axis: int, is_max: bool) -> Vector:
-    """Box-local up direction for a face, following Blender numpad conventions.
-
-    Side faces (local ±X / ±Y normal) → local +Z is up. Top face (local +Z
-    normal) → local +Y is up; bottom face (local -Z normal) → local -Y is
-    up. The caller rotates this through the empty's matrix so the
-    resulting world up axis tracks the box's orientation.
-    """
-    if axis == 2:
-        return Vector((0.0, 1.0, 0.0)) if is_max else Vector((0.0, -1.0, 0.0))
-    return Vector((0.0, 0.0, 1.0))
-
-
-def _view_rotation_from_forward_and_up(forward: Vector, up_hint: Vector) -> "bpy.types.Quaternion":
-    """Build a camera ``view_rotation`` that looks along ``forward`` with
-    ``up_hint`` projected to the camera's local +Y."""
-    back = -forward.normalized()
-    right = up_hint.cross(back)
-    if right.length < 1e-6:
-        right = Vector((1.0, 0.0, 0.0))
-    right.normalize()
-    up = back.cross(right).normalized()
-    return Matrix(
-        (
-            (right.x, up.x, back.x),
-            (right.y, up.y, back.y),
-            (right.z, up.z, back.z),
-        )
-    ).to_quaternion()
-
-
-class BIM_OT_add_clip_box(bpy.types.Operator):
-    bl_idname = "bim.add_clip_box"
-    bl_label = "Add Clip Box"
-    bl_description = (
-        "Create a clip box empty at the 3D cursor. The empty's location, rotation, and scale "
-        "drive the viewport clip planes; resize with S, move with G, rotate with R"
-    )
-    bl_options = {"REGISTER", "UNDO"}
-
-    def execute(self, context):
-        # Default to a 20m cube (scale 10 around [-1, +1] local cube) so
-        # the volume covers a typical building storey or two rather than
-        # the meaningless 2m unit cube. The user resizes with S.
-        matrix = Matrix.Translation(context.scene.cursor.location.copy()) @ Matrix.Diagonal((10.0, 10.0, 10.0, 1.0))
-        tool.ClipBox.create_clip_box_empty(context, matrix, name=CLIP_BOX_NAME)
-        return {"FINISHED"}
-
-
-class BIM_OT_add_clip_box_for_source(bpy.types.Operator):
-    bl_idname = "bim.add_clip_box_for_source"
-    bl_label = "Add Clip Box From Source"
-    bl_description = (
-        "Create a clip box sized to a chosen source: a spatial container, IFC type, material, "
-        "profile, drawing camera frustum, element status, system, group, or zone"
-    )
-    bl_options = {"REGISTER", "UNDO"}
-
-    source_kind: bpy.props.EnumProperty(
-        name="Source Kind",
-        items=[(kind, label, "") for kind, label in SOURCE_KIND_LABELS.items()],
-        default="SPATIAL",
-        options={"SKIP_SAVE"},
-    )
-    source_id: bpy.props.EnumProperty(
-        name="Source",
-        items=_source_id_items,
-        options={"SKIP_SAVE"},
-    )
-
-    def invoke(self, context, event):
-        return context.window_manager.invoke_props_dialog(self)
-
-    def draw(self, context):
-        layout = self.layout
-        label = f"Clip {SOURCE_KIND_LABELS.get(self.source_kind, 'Source')}"
-        # Search button appears once the enum exceeds the helper's threshold,
-        # giving the user a popup picker instead of a plain dropdown.
-        prop_with_search(layout, self, "source_id", text=label)
-
-    def execute(self, context):
-        if not self.source_id or self.source_id == data.NO_OPTIONS_ID:
-            self.report({"ERROR"}, "No source selected.")
-            return {"CANCELLED"}
-        matrix = tool.ClipBox.compute_matrix_for_source(self.source_kind, self.source_id)
-        if matrix is None:
-            kind_label = SOURCE_KIND_LABELS.get(self.source_kind, self.source_kind)
-            self.report(
-                {"ERROR"},
-                f"No elements found for {kind_label} '{_source_display_name(self.source_kind, self.source_id)}'.",
-            )
-            return {"CANCELLED"}
-        name = f"ClipBox.{SOURCE_KIND_LABELS.get(self.source_kind, self.source_kind)}.{_source_display_name(self.source_kind, self.source_id)}"
-        tool.ClipBox.create_clip_box_empty(context, matrix, name=name)
-        return {"FINISHED"}
-
-
-class BIM_OT_remove_clip_box(bpy.types.Operator):
-    bl_idname = "bim.remove_clip_box"
-    bl_label = "Remove Clip Box"
-    bl_description = "Remove this clip box and its host empty"
-    bl_options = {"REGISTER", "UNDO"}
-
-    index: bpy.props.IntProperty(default=-1, options={"SKIP_SAVE"})
-    delete_object: bpy.props.BoolProperty(default=True, name="Delete Host Object")
-
-    def execute(self, context):
-        scene_props = tool.ClipBox.get_scene_props(context.scene)
-        index = self.index if self.index >= 0 else scene_props.active_clip_box_index
-        if index < 0 or index >= len(scene_props.clip_boxes):
-            return {"CANCELLED"}
-
-        entry = scene_props.clip_boxes[index]
-        obj = entry.obj
-        scene_props.clip_boxes.remove(index)
-        if scene_props.active_clip_box_index >= len(scene_props.clip_boxes):
-            scene_props.active_clip_box_index = max(0, len(scene_props.clip_boxes) - 1)
-
-        if self.delete_object and obj is not None:
-            bpy.data.objects.remove(obj, do_unlink=True)
-
-        tool.ClipBox.refresh(context.scene)
-        tool.ClipBox.save_to_project_pset(context.scene)
-        return {"FINISHED"}
-
-
-class BIM_OT_set_active_clip_box(bpy.types.Operator):
-    bl_idname = "bim.set_active_clip_box"
-    bl_label = "Set Active Clip Box"
-    bl_description = "Set this clip box as the active one driving the viewport clip"
-    bl_options = {"REGISTER", "UNDO"}
-
-    index: bpy.props.IntProperty(default=-1, options={"SKIP_SAVE"})
-
-    def execute(self, context):
-        scene_props = tool.ClipBox.get_scene_props(context.scene)
-        if self.index < 0 or self.index >= len(scene_props.clip_boxes):
-            return {"CANCELLED"}
-        scene_props.active_clip_box_index = self.index
-        return {"FINISHED"}
-
-
-class BIM_OT_toggle_clip_box_enabled(bpy.types.Operator):
-    bl_idname = "bim.toggle_clip_box_enabled"
-    bl_label = "Toggle Clip Box"
-    bl_description = "Toggle whether the active clip box is driving the viewport clip planes"
-    bl_options = {"REGISTER", "UNDO"}
-
-    def execute(self, context):
-        scene_props = tool.ClipBox.get_scene_props(context.scene)
-        scene_props.enabled = not scene_props.enabled
-        return {"FINISHED"}
-
-
-class BIM_OT_duplicate_clip_box(bpy.types.Operator):
-    bl_idname = "bim.duplicate_clip_box"
-    bl_label = "Duplicate Clip Box"
-    bl_description = "Duplicate this clip box: copy its empty + matrix into a new entry"
-    bl_options = {"REGISTER", "UNDO"}
-
-    index: bpy.props.IntProperty(default=-1, options={"SKIP_SAVE"})
-
-    def execute(self, context):
-        scene_props = tool.ClipBox.get_scene_props(context.scene)
-        source_index = self.index if self.index >= 0 else scene_props.active_clip_box_index
-        if source_index < 0 or source_index >= len(scene_props.clip_boxes):
-            return {"CANCELLED"}
-        source = scene_props.clip_boxes[source_index].obj
-        if source is None:
-            return {"CANCELLED"}
-
-        copy = tool.ClipBox.create_clip_box_empty(context, source.matrix_world.copy(), name=source.name)
-        # Preserve the source's display attrs so the duplicate matches.
-        copy.empty_display_type = source.empty_display_type
-        copy.empty_display_size = source.empty_display_size
-        copy.show_in_front = source.show_in_front
-        return {"FINISHED"}

src/bonsai/bonsai/bim/module/clip_box/prop.py

@@ -1,165 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-from __future__ import annotations
-
-from typing import TYPE_CHECKING
-
-import bpy
-from bpy.types import PropertyGroup
-
-import bonsai.tool as tool
-from bonsai.bim.prop import ObjProperty
-
-
-class BIMClipBoxProperties(PropertyGroup):
-    """Per-object marker for a clip-box host empty.
-
-    The host empty's ``matrix_world`` is the single source of truth for
-    the clip box's pose and dimensions: translation = box centre,
-    rotation = box orientation, per-axis scale = world half-extents. The
-    visible cube comes from the empty's CUBE display.
-
-    Only ``is_clip_box`` lives here; visibility (``enabled``) and overlay
-    (``show_caps``) are global per-file and live on the Scene PG.
-    """
-
-    is_clip_box: bpy.props.BoolProperty(
-        default=False,
-        description="True when this empty was created as a clip-box host. Internal flag; not user-edited.",
-    )
-
-    if TYPE_CHECKING:
-        is_clip_box: bool
-
-
-def update_active_clip_box_index(self, context):
-    tool.ClipBox.schedule_refresh()
-    tool.ClipBox.select_active_clip_box(context)
-    # Rebuild caps for the new active box's clip volume.
-    tool.ClipBox.invalidate_cap_cache(immediate=True)
-
-
-def update_show_caps(self, context):
-    tool.ClipBox.schedule_refresh()
-    # Off → on must trigger a rebuild so caps reappear immediately rather
-    # than wait for the next depsgraph tick. The rebuild is a no-op when
-    # show_caps is now False (it clears and returns), so this is safe in
-    # both directions.
-    tool.ClipBox.invalidate_cap_cache()
-
-
-def update_enabled(self, context):
-    tool.ClipBox.schedule_refresh()
-
-
-def update_clip_only_ifc_products(self, context):
-    # The eligibility set for capping changed — drop the cache and let the
-    # debounced rebuild pick up the new objects on the next idle tick.
-    tool.ClipBox.invalidate_cap_cache()
-
-
-def update_include_linked_ifc(self, context):
-    tool.ClipBox.invalidate_cap_cache()
-
-
-class BIMSceneClipBoxProperties(PropertyGroup):
-    """Scene-level registry of clip boxes in this file.
-
-    Multiple boxes may exist; ``active_clip_box_index`` selects which one
-    drives the viewport clip at any time. ``enabled`` and ``show_caps``
-    are global because the user's intent ("hide everything outside the
-    box", "draw cap overlays") applies file-wide, not per box.
-
-    ``enabled`` is intentionally not persisted to the project pset:
-    opening a fresh IFC should never silently hide geometry behind a
-    remembered toggle. Selecting any clip-box empty in the viewport
-    re-arms it (see :meth:`tool.ClipBox._sync_active_to_selection`).
-    """
-
-    clip_boxes: bpy.props.CollectionProperty(type=ObjProperty)
-    active_clip_box_index: bpy.props.IntProperty(
-        default=0,
-        min=0,
-        update=update_active_clip_box_index,
-        description="Index of the clip box currently driving the viewport clip planes",
-    )
-    enabled: bpy.props.BoolProperty(
-        name="Enabled",
-        default=False,
-        update=update_enabled,
-        description="When enabled, the active clip box hides all viewport geometry outside its 6 faces",
-    )
-    show_caps: bpy.props.BoolProperty(
-        name="Show Caps",
-        default=True,
-        update=update_show_caps,
-        description=(
-            "Draw filled cross-section caps where IFC product geometry "
-            "crosses the active clip planes. Disable for performance on "
-            "very heavy scenes"
-        ),
-    )
-    # Stored on the Scene PG so Blender persists it in the .blend; deliberately
-    # NOT written to the project pset so the IFC stays portable across users
-    # who may have different Blender-side reference geometry to clip.
-    clip_only_ifc_products: bpy.props.BoolProperty(
-        name="Only IFC Products",
-        default=True,
-        update=update_clip_only_ifc_products,
-        description=(
-            "When enabled, only IFC element geometry gets cross-section caps. "
-            "Disable to also cap Blender-side reference meshes (sketches, "
-            "imported obj, primitive cubes, …)"
-        ),
-    )
-    # Opt-in inclusion of geometry sitting inside loaded Project › Links
-    # collection-instance empties. Off by default — linked IFCs commonly
-    # carry the entire site / structural / MEP context, and bisecting
-    # them on every clip-box edit can be expensive.
-    include_linked_ifc: bpy.props.BoolProperty(
-        name="Include Linked IFC",
-        default=False,
-        update=update_include_linked_ifc,
-        description=(
-            "Also generate cross-section caps for geometry inside linked "
-            "IFC files (Project ▸ Links). Off by default — linked IFCs may "
-            "carry the entire site / structural backbone, and capping them "
-            "adds per-mesh bisect cost on every clip-box edit"
-        ),
-    )
-    # Also Scene-only — gizmo visibility is a per-user editing preference,
-    # not a portable IFC property.
-    enable_gizmos: bpy.props.BoolProperty(
-        name="Show Face Handles",
-        default=True,
-        description=(
-            "Show interactive face-resize handles on the active clip box. "
-            "Disable to fall back to plain G/R/S transforms on the empty"
-        ),
-    )
-
-    if TYPE_CHECKING:
-        active_clip_box_index: int
-        enabled: bool
-        show_caps: bool
-        clip_only_ifc_products: bool
-        include_linked_ifc: bool
-        enable_gizmos: bool

src/bonsai/bonsai/bim/module/clip_box/ui.py

@@ -1,145 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-from __future__ import annotations
-
-from bpy.types import Menu, Panel, UIList
-
-import bonsai.tool as tool
-
-# Per-kind icon for the source-picker menu. Picked from Blender's built-in
-# icon set; semantically close to the kind so users can scan the menu visually.
-_SOURCE_MENU_ENTRIES: tuple[tuple[str, str, str], ...] = (
-    ("SPATIAL", "Clip Spatial Element", "OUTLINER_COLLECTION"),
-    ("CLASS", "Clip by Class", "BLANK1"),
-    ("TYPE", "Clip Type", "FILE_3D"),
-    ("MATERIAL", "Clip Material", "MATERIAL"),
-    ("PROFILE", "Clip Profile", "MESH_CIRCLE"),
-    ("DRAWING", "Clip Drawing Extents", "CAMERA_DATA"),
-    ("STATUS", "Clip by Status", "INFO"),
-    ("SYSTEM", "Clip by System", "MOD_FLUID"),
-    ("GROUP", "Clip by Group", "OUTLINER_OB_GROUP_INSTANCE"),
-    ("ZONE", "Clip by Zone", "MOD_LATTICE"),
-)
-
-
-class BIM_MT_clip_box_add_for_source(Menu):
-    bl_idname = "BIM_MT_clip_box_add_for_source"
-    bl_label = "Add Clip Box From Source"
-
-    def draw(self, context):
-        layout = self.layout
-        for kind, label, icon in _SOURCE_MENU_ENTRIES:
-            op = layout.operator("bim.add_clip_box_for_source", text=label, icon=icon)
-            op.source_kind = kind
-
-
-class BIM_MT_clip_box_settings(Menu):
-    bl_idname = "BIM_MT_clip_box_settings"
-    bl_label = "Clip Box Settings"
-
-    def draw(self, context):
-        scene_props = tool.ClipBox.get_scene_props(context.scene)
-        self.layout.prop(scene_props, "clip_only_ifc_products")
-        self.layout.prop(scene_props, "include_linked_ifc")
-        self.layout.prop(scene_props, "enable_gizmos")
-
-
-class BIM_MT_clip_box_info(Menu):
-    bl_idname = "BIM_MT_clip_box_info"
-    bl_label = "Clip Box Face Handles"
-
-    def draw(self, context):
-        layout = self.layout
-        layout.label(text="Face Handles", icon="INFO")
-        layout.separator()
-        layout.label(text="Drag a face to resize the clip box on that axis.")
-        layout.label(text="The opposite face stays fixed (one-sided resize).")
-        layout.label(text="Ctrl+Click a face to align the viewport to it.")
-        layout.separator()
-        layout.label(text="Toggle handles from the Settings (gear) menu.")
-
-
-class BIM_UL_clip_box(UIList):
-    def draw_item(self, context, layout, data, item, icon, active_data, active_propname, index, flt_flag):
-        obj = item.obj
-        row = layout.row(align=True)
-        if obj is None:
-            # Host empty was deleted from outliner; still expose the
-            # remove button so the orphan entry isn't permanent.
-            row.label(text="(missing)", icon="ERROR")
-            row.operator("bim.remove_clip_box", text="", icon="X", emboss=False).index = index
-            return
-        row.prop(obj, "name", text="", emboss=False, icon="MESH_CUBE")
-        row.operator("bim.duplicate_clip_box", text="", icon="DUPLICATE", emboss=False).index = index
-        row.operator("bim.remove_clip_box", text="", icon="X", emboss=False).index = index
-
-
-class BIM_PT_clip_box(Panel):
-    bl_idname = "BIM_PT_clip_box"
-    bl_label = "Clip Box"
-    bl_space_type = "PROPERTIES"
-    bl_region_type = "WINDOW"
-    bl_context = "scene"
-    bl_options = {"DEFAULT_CLOSED"}
-    bl_parent_id = "BIM_PT_tab_sandbox"
-
-    def draw(self, context):
-        layout = self.layout
-        scene_props = tool.ClipBox.get_scene_props(context.scene)
-
-        toggles = layout.row(align=True)
-        toggles.scale_y = 2.0
-        toggles.prop(
-            scene_props,
-            "enabled",
-            text="Enable Clipping",
-            icon="HIDE_OFF" if scene_props.enabled else "HIDE_ON",
-            toggle=True,
-        )
-        toggles.prop(scene_props, "show_caps", text="Show Caps", icon="MOD_SOLIDIFY", toggle=True)
-        toggles.menu("BIM_MT_clip_box_settings", icon="PREFERENCES", text="")
-        toggles.menu("BIM_MT_clip_box_info", icon="INFO", text="")
-
-        layout.separator()
-        row = layout.row(align=True)
-        row.operator("bim.add_clip_box", icon="ADD", text="Add Clip Box")
-        row.menu("BIM_MT_clip_box_add_for_source", icon="DOWNARROW_HLT", text="")
-
-        layout.template_list(
-            "BIM_UL_clip_box",
-            "",
-            scene_props,
-            "clip_boxes",
-            scene_props,
-            "active_clip_box_index",
-            rows=3,
-        )
-
-        obj = tool.ClipBox.get_active_clip_box(context.scene)
-        if obj is None:
-            layout.label(text="No active clip box", icon="INFO")
-            return
-
-        col = layout.column(align=True)
-        col.label(text="Edit the empty with G / R / S to move / rotate / resize")
-        col.prop(obj, "location")
-        col.prop(obj, "rotation_euler")
-        col.prop(obj, "scale")

src/bonsai/bonsai/bim/module/drawing/gizmos.py

@@ -82,15 +82,7 @@ import math
 from collections.abc import Callable, Iterator
 from dataclasses import dataclass
 from enum import Enum
-from typing import (
-    TYPE_CHECKING,
-    Any,
-    ClassVar,
-    Literal,
-    Optional,
-    Protocol,
-    runtime_checkable,
-)
+from typing import Any, ClassVar, Literal, Optional, Protocol, runtime_checkable
 
 import blf
 import bpy
@@ -113,9 +105,6 @@ from mathutils.kdtree import KDTree
 import bonsai.tool as tool
 from bonsai.bim.module.drawing.shaders import ExtrusionGuidesShader
 
-if TYPE_CHECKING:
-    import bmesh
-
 SNAP_POINT_SIZE = 10.0
 SNAP_POINT_COLOR = (1.0, 0.5, 0.0, 1.0)
 SNAP_MAX_RADIUS = 50.0
@@ -170,13 +159,40 @@ _SPECIAL = {"=", " "}  # Formula prefix, spaces
 NUMERIC_INPUT_CHARS = _DIGITS | _OPERATORS | _METRIC_UNITS | _IMPERIAL_UNITS | _SPECIAL
 
 
-def _is_transform_modal_active(context) -> bool:
-    """Module-local alias for ``tool.Blender.is_transform_modal_active``.
+_BONSAI_TRANSFORM_MACROS = frozenset(
+    {
+        # Bonsai overrides Blender's default move/duplicate keymaps with
+        # macros that wrap TRANSFORM_OT_translate. While a macro is the outer
+        # modal entry, the inner TRANSFORM_OT_translate does not surface in
+        # window.modal_operators — the macro's own idname does. The
+        # ``BIM_OT_`` prefix is what Blender returns from ``bl_idname`` at
+        # runtime (the class declaration uses the dotted ``bim.`` form).
+        "BIM_OT_override_move_macro",  # G key
+        "BIM_OT_override_object_duplicate_move_macro",  # Shift+D
+        "BIM_OT_override_object_duplicate_move_linked_macro",  # Alt+D
+        "BIM_OT_object_duplicate_move_linked_aggregate_macro",  # Ctrl+Shift+D
+    }
+)
 
-    Preserved as a name so AST scans and call sites in this file stay
-    decoupled from the helper's home module.
-    """
-    return tool.Blender.is_transform_modal_active(context)
+
+def _is_transform_modal_active(context) -> bool:
+    """True iff a Blender transform modal (G/R/S and siblings, including
+    Bonsai's macro overrides) is currently driving per-frame ``matrix_world``
+    updates. Reads ``window.modal_operators`` — the Blender 4.2+ collection of
+    running modal operators. Parametric gizmo groups gate poll + draw_prepare
+    on this so they hide for the duration of the drag instead of sliding
+    off-cursor as the matrix updates each frame."""
+    window = getattr(context, "window", None)
+    if window is None:
+        return False
+    modal_ops = getattr(window, "modal_operators", None)
+    if not modal_ops:
+        return False
+    for op in modal_ops:
+        idname = op.bl_idname
+        if idname.startswith("TRANSFORM_OT_") or idname in _BONSAI_TRANSFORM_MACROS:
+            return True
+    return False
 
 
 def _hide_all_non_modal_gizmos(group) -> None:
@@ -2046,9 +2062,7 @@ class TexturedQuadGizmoMixin(StaticTrisGizmoMixin):
 
     def setup(self) -> None:
         super().setup()
-        from bonsai.bim.module.drawing import (
-            gizmo_textures,  # ty: ignore[unresolved-import]
-        )
+        from bonsai.bim.module.drawing import gizmo_textures
 
         self._quad_batch = batch_for_shader(
             gizmo_textures.get_shader(),
@@ -2057,9 +2071,7 @@ class TexturedQuadGizmoMixin(StaticTrisGizmoMixin):
         )
 
     def draw(self, context: bpy.types.Context) -> None:
-        from bonsai.bim.module.drawing import (
-            gizmo_textures,  # ty: ignore[unresolved-import]
-        )
+        from bonsai.bim.module.drawing import gizmo_textures
 
         texture = gizmo_textures.get_icon_texture(self.icon_name)
         if texture is None:
@@ -4865,14 +4877,7 @@ class GizmoDimension(GizmoMovable):
 
         self.init_value = click_distance
 
-        # Schematic gizmos opt out of dimension snap. Force the header
-        # indicator to ``off`` for the drag's duration so the user sees the
-        # state matches behaviour; ``exit`` restores ``initial_snap_state``.
-        # Skipping the snap cache here also avoids the per-drag mesh probe.
-        snap_supported = getattr(self.gizmo_group, "snap_enabled_on_dimensions", True)
-        if not snap_supported:
-            context.scene.tool_settings.use_snap = False
-        elif self.initial_snap_state and self.active_obj:
+        if self.initial_snap_state and self.active_obj:
             build_snap_cache(context, self.active_obj)
             self._snap_cache_built = True
 
@@ -4914,18 +4919,11 @@ class GizmoDimension(GizmoMovable):
         if not region or not rv3d:
             return {"RUNNING_MODAL"}
 
-        # Group-level opt-out: schematic gizmos float in viewport space, so
-        # global-snap-to-scene-vertices would produce spurious value jumps.
-        # The fallback (``True``) covers any gizmo whose group is not a
-        # ``BaseParametricGizmoGroup``.
-        snap_supported = getattr(self.gizmo_group, "snap_enabled_on_dimensions", True)
+        tool_settings.use_snap = not self.initial_snap_state if event.ctrl else self.initial_snap_state
 
-        if snap_supported:
-            tool_settings.use_snap = not self.initial_snap_state if event.ctrl else self.initial_snap_state
-
-            if tool_settings.use_snap and not self._snap_cache_built and self.active_obj:
-                build_snap_cache(context, self.active_obj)
-                self._snap_cache_built = True
+        if tool_settings.use_snap and not self._snap_cache_built and self.active_obj:
+            build_snap_cache(context, self.active_obj)
+            self._snap_cache_built = True
 
         current_coord = (event.mouse_region_x, event.mouse_region_y)
 
@@ -4949,7 +4947,7 @@ class GizmoDimension(GizmoMovable):
 
         delta = (current_3d - self.start_location).dot(axis_direction)
 
-        if snap_supported and tool_settings.use_snap and self.active_obj:
+        if tool_settings.use_snap and self.active_obj:
             # Snap the dimension tip (not mouse position) to target
             # Calculate where the dimension tip would be with current delta
             # The tip is at: gizmo_origin + axis * (init_value + delta)
@@ -5322,13 +5320,6 @@ class BaseParametricGizmoGroup:
     # Pre-computed flip matrix for negative value handling (180° rotation around Z)
     FLIP_MATRIX = Matrix.Rotation(math.pi, 4, "Z")
 
-    # Default: dimension drags respect Blender's global snap (Ctrl-toggleable
-    # during drag). Subclasses whose dimensions float in viewport space rather
-    # than aligning to real-world geometry should override to ``False`` —
-    # snapping to scene vertices in that case produces spurious value jumps
-    # as the mouse crosses unrelated meshes.
-    snap_enabled_on_dimensions: bool = True
-
     # === Icon Gizmo Layout (meters) ===
     # Icons are positioned in a horizontal row above the element:
     #   [Validate] [Cancel] [Cycle]
@@ -6589,11 +6580,6 @@ class BaseSchematicGizmoGroup(BaseParametricGizmoGroup):
     # list and become no-ops. The schematic equivalents below take their place.
     dimension_gizmo_props: list[DimensionGizmoConfig] = []
 
-    # Schematic dimensions float in billboarded viewport space, not aligned to
-    # real-world geometry. Snapping the dragged tip to scene vertices would
-    # produce nonsensical value jumps as the mouse crosses unrelated meshes.
-    snap_enabled_on_dimensions: bool = False
-
     # Declarative dimension configuration consumed by ``setup_schematic_dimensions``
     # and ``update_schematic_dimensions``. Each config produces one
     # ``BIM_GT_gizmo_dimension`` instance positioned at a schematic-local

src/bonsai/bonsai/bim/module/drawing/handler.py

@@ -50,9 +50,6 @@ def set_active_camera_resolution(scene: bpy.types.Scene) -> None:
     if camera.type != props.camera_type:
         camera.type = props.camera_type
 
-    if props.update_props and (drawing := tool.Ifc.get_entity(camera_obj)):
-        tool.Drawing.sync_perspective_camera_shifts(drawing, camera)
-
     ortho_scale, aspect_ratio = props.get_scale_and_aspect_ratio()
     scene_render = scene.render
     if (camera.ortho_scale != ortho_scale) or not tool.Cad.is_x(

src/bonsai/bonsai/bim/module/drawing/helper.py

@@ -189,20 +189,14 @@ def format_distance(
             if hasattr(length_unit, "Prefix") and length_unit.Prefix:
                 unit_length = length_unit.Prefix + length_unit.Name
             unit_length_mapping = {
-                "MILE": "MILES",
                 "FOOT": "FEET",
                 "INCH": "INCHES",
-                "KILOMETRE": "KILOMETERS",
                 "METRE": "METERS",
                 "DECIMETRE": "DECIMETERS",
                 "CENTIMETRE": "CENTIMETERS",
                 "MILLIMETRE": "MILLIMETERS",
-                "MICROMETRE": "MICROMETERS",
             }
-            # Fall through for units without a dedicated formatter (e.g.
-            # HECTOMETRE) so they use the adaptive branch instead of a
-            # KeyError (#8255).
-            unit_length = unit_length_mapping.get(unit_length, unit_length)
+            unit_length = unit_length_mapping[unit_length]
         # For now we only format area in IFC Units
         if area_unit := ifcopenshell.util.unit.get_project_unit(tool.Ifc.get(), "AREAUNIT"):
             area_unit_symbol = " " + ifcopenshell.util.unit.get_unit_symbol(area_unit)

src/bonsai/bonsai/bim/module/drawing/operator.py

@@ -57,7 +57,7 @@ import shapely
 from bpy_extras.image_utils import load_image
 from bpy_extras.io_utils import ImportHelper
 from lxml import etree
-from mathutils import Color, Matrix, Vector
+from mathutils import Color, Vector
 
 import bonsai.bim.export_ifc
 import bonsai.bim.handler
@@ -602,7 +602,6 @@ class CreateDrawing(bpy.types.Operator):
         context_type: Literal["body", "annotation"],
         drawing_elements: set[ifcopenshell.entity_instance],
         target_view: str,
-        link_matrix: Optional[Matrix] = None,
     ) -> None:
         drawing_elements = drawing_elements.copy()
         contexts_: list[list[int]] = getattr(contexts, context_type)
@@ -614,19 +613,9 @@ class CreateDrawing(bpy.types.Operator):
                 geom_settings.set("dimensionality", ifcopenshell.ifcopenshell_wrapper.CURVES_SURFACES_AND_SOLIDS)
                 geom_settings.set("iterator-output", ifcopenshell.ifcopenshell_wrapper.NATIVE)
 
-                is_plan = ifc.by_id(context[0]).ContextType == "Plan" and "PLAN_VIEW" in target_view
-                z_offset = (0.002 if target_view == "PLAN_VIEW" else -0.002) if is_plan else 0.0
-
-                if link_matrix is not None:
-                    unit_scale = ifcopenshell.util.unit.calculate_unit_scale(ifc)
-                    t = link_matrix.to_translation()
-                    offset = (t.x / unit_scale, t.y / unit_scale, t.z / unit_scale + z_offset)
-                    geom_settings.set("model-offset", offset)
-                    q = link_matrix.to_quaternion()
-                    geom_settings.set("model-rotation", (q.x, q.y, q.z, q.w))
-                elif z_offset:
+                if ifc.by_id(context[0]).ContextType == "Plan" and "PLAN_VIEW" in target_view:
                     # A 2mm Z offset to combat Z-fighting in plan or RCPs
-                    geom_settings.set("model-offset", (0.0, 0.0, z_offset))
+                    geom_settings.set("model-offset", (0.0, 0.0, 0.002 if target_view == "PLAN_VIEW" else -0.002))
 
                 geom_settings.set("context-ids", context)
                 it = ifcopenshell.geom.iterator(
@@ -934,16 +923,11 @@ class CreateDrawing(bpy.types.Operator):
 
         bim_props = tool.Blender.get_bim_props()
         prefs = tool.Blender.get_addon_preferences()
-        # Map ifc_path → (ifc_file, link_matrix); main file has no link_matrix (None)
-        files: dict[str, tuple[ifcopenshell.file, Optional[Matrix]]] = {bim_props.ifc_file: (tool.Ifc.get(), None)}
+        files = {bim_props.ifc_file: tool.Ifc.get()}
 
         props = tool.Project.get_project_props()
         for link in props.get_loaded_links_for_drawings():
-            try:
-                link_matrix = tool.Project.calculate_link_matrix(link)
-            except Exception:
-                link_matrix = None
-            files[link.filepath] = (self.get_linked_file(link), link_matrix)
+            files[link.filepath] = self.get_linked_file(link)
 
         target_view = ifcopenshell.util.element.get_psets(self.camera_element)["EPset_Drawing"]["TargetView"]
         self.setup_serialiser(target_view)
@@ -951,13 +935,7 @@ class CreateDrawing(bpy.types.Operator):
         tree = ifcopenshell.geom.tree()
         tree.enable_face_styles(True)
 
-        # Accumulated across every file in the loop below (main model plus any
-        # linked models) so the SHAPELY fill pass after the loop covers all of
-        # them, not just whichever file happened to be processed last.
-        raycast_objs = set()
-        elements_with_faces = set()
-
-        for ifc_path, (ifc, link_matrix) in files.items():
+        for ifc_path, ifc in files.items():
             # Don't use draw.main() just whilst we're prototyping and experimenting
             # TODO: hash paths are never used
             ifc_hash = hashlib.md5(ifc_path.encode("utf-8")).hexdigest()
@@ -966,24 +944,13 @@ class CreateDrawing(bpy.types.Operator):
             self.serialiser.setFile(ifc)
             drawing_elements = tool.Drawing.get_drawing_elements(self.camera_element, ifc_file=ifc)
 
-            if self.cprops.fill_mode == "SHAPELY":
-                for element in drawing_elements.copy():
-                    if element.is_a("IfcAnnotation"):
-                        continue
-                    obj = tool.Ifc.get_object(element)
-                    if obj and obj.type == "MESH" and len(obj.data.polygons):
-                        elements_with_faces.add(element.GlobalId)
-                        raycast_objs.add(obj)
-
             # Get all representation contexts to see what we're dealing with.
             # Drawings only draw bodies and annotations (and facetation, due to a Revit bug).
             # A drawing prioritises a target view context first, followed by a model view context as a fallback.
             # Specifically for PLAN_VIEW and REFLECTED_PLAN_VIEW, any Plan context is also prioritised.
             contexts = self.get_linework_contexts(ifc, target_view)
-            self.serialize_contexts_elements(ifc, tree, contexts, "body", drawing_elements, target_view, link_matrix)
-            self.serialize_contexts_elements(
-                ifc, tree, contexts, "annotation", drawing_elements, target_view, link_matrix
-            )
+            self.serialize_contexts_elements(ifc, tree, contexts, "body", drawing_elements, target_view)
+            self.serialize_contexts_elements(ifc, tree, contexts, "annotation", drawing_elements, target_view)
 
             if tool.Ifc.get() == ifc and self.camera_element not in drawing_elements:
                 with profile("Camera element"):
@@ -1050,6 +1017,16 @@ class CreateDrawing(bpy.types.Operator):
             # shapely variant
             group = root.find("{http://www.w3.org/2000/svg}g")
 
+            raycast_objs = set()
+            elements_with_faces = set()
+            for element in drawing_elements.copy():
+                if element.is_a("IfcAnnotation"):
+                    continue
+                obj = tool.Ifc.get_object(element)
+                if obj and obj.type == "MESH" and len(obj.data.polygons):
+                    elements_with_faces.add(element.GlobalId)
+                    raycast_objs.add(obj)
+
             projections = root.xpath(
                 ".//svg:g[contains(@class, 'projection')]", namespaces={"svg": "http://www.w3.org/2000/svg"}
             )
@@ -1706,12 +1683,6 @@ class CreateDrawing(bpy.types.Operator):
             key=lambda a: (
                 tool.Drawing.get_annotation_z_index(a),
                 1 if ifcopenshell.util.element.get_predefined_type(a) == "TEXT" else 0,
-                # Deterministic tiebreaker so equal-priority annotations keep a
-                # stable order across sessions. Without it the order comes from
-                # the set union above, which depends on entity hashes (and thus
-                # the file pointer), shuffling annotations between Blender
-                # restarts. See #6608.
-                a.id(),
             ),
         )
 
@@ -2348,10 +2319,7 @@ class ActivateDrawingBase(tool.Ifc.Operator):
     bl_description = (
         "Activates the selected drawing view.\n\n"
         + "ALT+CLICK to keep the viewport position.\n\n"
-        + "SHIFT+CLICK to load a quick preview of the drawing view.\n\n"
-        + "SHIFT+CTRL+CLICK to load the annotations of all selected drawings without switching views, "
-        + "then select their cameras (the first selected drawing's camera becomes active).\n\n"
-        + "SHIFT+CTRL+ALT+CLICK to do the same but also select the annotations, not just the cameras"
+        + "SHIFT+CLICK to load a quick preview of the drawing view"
     )
 
     drawing: bpy.props.IntProperty()
@@ -2367,32 +2335,13 @@ class ActivateDrawingBase(tool.Ifc.Operator):
         default=False,
         options={"SKIP_SAVE"},
     )
-    load_selected_annotations: bpy.props.BoolProperty(
-        name="Load Selected Annotations",
-        description="Load the annotations of all selected drawings without switching the active view.",
-        default=False,
-        options={"SKIP_SAVE"},
-    )
-    include_annotations_in_selection: bpy.props.BoolProperty(
-        name="Include Annotations In Selection",
-        description="Also select the loaded annotation objects, not just the drawing cameras.",
-        default=False,
-        options={"SKIP_SAVE"},
-    )
 
     if TYPE_CHECKING:
         drawing: int
         should_view_from_camera: bool
         use_quick_preview: bool
-        load_selected_annotations: bool
-        include_annotations_in_selection: bool
 
     def invoke(self, context, event) -> set["rna_enums.OperatorReturnItems"]:
-        if event.type == "LEFTMOUSE" and event.shift and event.ctrl:
-            self.load_selected_annotations = True
-            if event.alt:
-                self.include_annotations_in_selection = True
-            return self.execute(context)
         if event.type == "LEFTMOUSE" and event.alt:
             self.should_view_from_camera = False
         if event.type == "LEFTMOUSE" and event.shift:
@@ -2405,37 +2354,6 @@ class ActivateDrawingBase(tool.Ifc.Operator):
         if props.is_editing_drawings == False:
             bpy.ops.bim.load_drawings()
 
-        if self.load_selected_annotations:
-            objs_to_select = []
-            active_camera = None
-            for d in props.drawings:
-                if not (d.is_drawing and d.is_selected):
-                    continue
-                selected_drawing = tool.Ifc.get().by_id(d.ifc_definition_id)
-                # Importing the camera (if missing) ensures the drawing's
-                # collection exists so the annotations get collected into it.
-                if not (camera := tool.Ifc.get_object(selected_drawing)):
-                    camera = tool.Drawing.import_drawing(selected_drawing)
-                group = tool.Drawing.get_drawing_group(selected_drawing)
-                tool.Drawing.import_annotations_in_group(group)
-
-                if active_camera is None:
-                    active_camera = camera
-                objs_to_select.append(camera)
-                if self.include_annotations_in_selection:
-                    for element in tool.Drawing.get_group_elements(group) or []:
-                        if element.is_a("IfcAnnotation") and element.ObjectType != "DRAWING":
-                            if annotation_obj := tool.Ifc.get_object(element):
-                                objs_to_select.append(annotation_obj)
-
-            # Select the checked drawings' objects, with the first drawing's camera as active.
-            bpy.ops.object.select_all(action="DESELECT")
-            for obj in objs_to_select:
-                obj.select_set(True)
-            if active_camera is not None:
-                context.view_layer.objects.active = active_camera
-            return {"FINISHED"}
-
         drawing = tool.Ifc.get().by_id(self.drawing)
         dprops = tool.Drawing.get_document_props()
 
@@ -2521,10 +2439,7 @@ class ActivateDrawing(bpy.types.Operator, ActivateDrawingBase):
     bl_description = (
         "Activates the selected drawing view.\n\n"
         + "ALT+CLICK to keep the viewport position.\n\n"
-        + "SHIFT+CLICK to load a quick preview of the drawing view.\n\n"
-        + "SHIFT+CTRL+CLICK to load the annotations of all selected drawings without switching views, "
-        + "then select their cameras (the first selected drawing's camera becomes active).\n\n"
-        + "SHIFT+CTRL+ALT+CLICK to do the same but also select the annotations, not just the cameras"
+        + "SHIFT+CLICK to load a quick preview of the drawing view"
     )
 
 

src/bonsai/bonsai/bim/module/drawing/prop.py

@@ -604,7 +604,6 @@ class BIMCameraProperties(PropertyGroup):
         return tool.Blender.get_active_uilist_element(dprops.drawing_styles, self.active_drawing_style_index)
 
     # For now, this JSON dump are all the parameters that determine a camera's "Block representation"
-    # Perspective camera shift is stored in EPset_Drawing and intentionally excluded here.
     # By checking this, you will know whether or not the camera IFC representation needs to be refreshed
     def update_representation(self, matrix_world: Matrix) -> bool:
         """Update ``representation`` based on current camera properties and the provided world matrix.

src/bonsai/bonsai/bim/module/drawing/ui.py

@@ -99,10 +99,6 @@ class BIM_PT_camera(Panel):
         if props.target_view == "MODEL_VIEW":
             row = self.layout.row()
             row.prop(props, "camera_type")
-            if props.camera_type == "PERSP":
-                row = self.layout.row(align=True)
-                row.prop(camera_data, "shift_x", text="Camera Shift X/Y:")
-                row.prop(camera_data, "shift_y", text="")
 
         row = self.layout.row()
         row.prop(props, "linework_mode")

src/bonsai/bonsai/bim/module/geometry/decorator.py

@@ -16,6 +16,8 @@
 # You should have received a copy of the GNU General Public License
 # along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
 
+from collections.abc import Sequence
+
 import blf
 import bpy
 import gpu
@@ -23,16 +25,15 @@ import ifcopenshell
 import numpy as np
 from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
+from gpu_extras.batch import batch_for_shader
 from mathutils import Matrix, Vector
 
 import bonsai.tool as tool
 
 
-class ItemDecorator(tool.Blender.ViewportDecorator):
-    draw_methods = (
-        ("draw_text", "POST_PIXEL"),
-        ("draw", "POST_VIEW"),
-    )
+class ItemDecorator:
+    is_installed = False
+    handlers = []
     objs: dict[str, dict[str, list]]
     obj_is_selected: dict[str, bool]
     obj_is_boolean: dict[str, list[ifcopenshell.entity_instance]]
@@ -118,6 +119,23 @@ class ItemDecorator(tool.Blender.ViewportDecorator):
             "special_edges": special_edges,
         }
 
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
+
     def draw_text(self, context):
         self.addon_prefs = tool.Blender.get_addon_preferences()
         selected_elements_color = self.addon_prefs.decorator_color_selected
@@ -145,6 +163,11 @@ class ItemDecorator(tool.Blender.ViewportDecorator):
         blf.disable(font_id, blf.SHADOW)
 
     def draw(self, context: bpy.types.Context) -> None:
+        def transparent_color(color: Sequence[float], alpha: float = 0.05) -> list[float]:
+            color = [i for i in color]
+            color[3] = alpha
+            return color
+
         self.addon_prefs = tool.Blender.get_addon_preferences()
         selected_elements_color = self.addon_prefs.decorator_color_selected
         unselected_elements_color = self.addon_prefs.decorator_color_unselected
@@ -174,33 +197,15 @@ class ItemDecorator(tool.Blender.ViewportDecorator):
                     if context.mode != "OBJECT":
                         continue
                     self.draw_batch("LINES", data["verts"], selected_elements_color, data["edges"])
-                    self.draw_batch(
-                        "TRIS",
-                        data["verts"],
-                        tool.Blender.transparent_color(selected_elements_color, alpha=0.05),
-                        data["tris"],
-                    )
+                    self.draw_batch("TRIS", data["verts"], transparent_color(selected_elements_color), data["tris"])
                     self.draw_batch("LINES", data["special_verts"], selected_elements_color, data["special_edges"])
                 elif self.obj_is_boolean[obj_name]:
                     self.draw_batch("LINES", data["verts"], special_elements_color, data["edges"])
-                    self.draw_batch(
-                        "TRIS",
-                        data["verts"],
-                        tool.Blender.transparent_color(special_elements_color, alpha=0.05),
-                        data["tris"],
-                    )
+                    self.draw_batch("TRIS", data["verts"], transparent_color(special_elements_color), data["tris"])
                     self.draw_batch("LINES", data["special_verts"], special_elements_color, data["special_edges"])
                 else:
                     self.draw_batch(
-                        "LINES",
-                        data["verts"],
-                        tool.Blender.transparent_color(unselected_elements_color, alpha=0.2),
-                        data["edges"],
-                    )
-                    self.draw_batch(
-                        "TRIS",
-                        data["verts"],
-                        tool.Blender.transparent_color(special_elements_color, alpha=0.05),
-                        data["tris"],
+                        "LINES", data["verts"], transparent_color(unselected_elements_color, alpha=0.2), data["edges"]
                     )
+                    self.draw_batch("TRIS", data["verts"], transparent_color(special_elements_color), data["tris"])
                     self.draw_batch("LINES", data["special_verts"], special_elements_color, data["special_edges"])

src/bonsai/bonsai/bim/module/geometry/operator.py

@@ -890,16 +890,6 @@ class OverrideDelete(bpy.types.Operator):
         # Track aggregates before deleting their parts
         aggregates_to_check = self.track_aggregates(objects_to_remove)
 
-        # Snapshot the set of IFC entity ids being deleted in this batch so the
-        # connection-rel cascade inside `delete_ifc_object` can suppress
-        # partner-side regenerate when the partner is also about to vanish.
-        batch_being_deleted_ids: set[int] = set()
-        for obj in objects_to_remove:
-            if not tool.Blender.is_valid_data_block(obj):
-                continue
-            if (entity := tool.Ifc.get_entity(obj)) is not None:
-                batch_being_deleted_ids.add(entity.id())
-
         clear_active_object = True
 
         for i, obj in enumerate(objects_to_remove, 1):
@@ -941,7 +931,7 @@ class OverrideDelete(bpy.types.Operator):
                 if tool.Drawing.is_auto_annotation(element):
                     self.report({"INFO"}, "References cannot be deleted. Exclude the referenced element instead.")
                     continue
-                tool.Geometry.delete_ifc_object(obj, batch_being_deleted_ids=batch_being_deleted_ids)
+                tool.Geometry.delete_ifc_object(obj)
             elif tool.Geometry.is_representation_item(obj):
                 tool.Geometry.delete_ifc_item(obj)
             else:
@@ -1040,10 +1030,7 @@ class OverrideDelete(bpy.types.Operator):
             pset = ifcopenshell.util.element.get_pset(element, "BBIM_Array")
             if not pset:
                 continue
-            try:
-                array_parents.add(ifc_file.by_guid(pset["Parent"]))
-            except RuntimeError:
-                continue
+            array_parents.add(ifc_file.by_guid(pset["Parent"]))
 
         for array_parent in array_parents:
             array_parent_obj = tool.Ifc.get_object(array_parent)
@@ -3446,40 +3433,43 @@ class UnassignRepresentationItemStyle(bpy.types.Operator, tool.Ifc.Operator):
             self.report({"ERROR"}, "Couldn't find any styles associated with the active representation item.")
             return {"CANCELLED"}
 
-        # Resolve an object's active representation down to its base geometry items,
-        # unwrapping mapped items (Revit families) and boolean results (openings/cuts)
-        # so we reach the items that actually carry styles.
-        def get_base_representation_items(obj):
-            representation = tool.Geometry.get_active_representation(obj)
-            if not representation or not representation.is_a("IfcRepresentation"):
-                return
-            yield from ifcopenshell.util.representation.resolve_base_items(representation)
+        # Unassign matching styles from the active object itself
+        for style in active_styles:
+            tool.Style.assign_style_to_representation_item(active_representation_item, None)
+            tool.Geometry.reload_representation(active_obj)
+            break  # No need to check further if one matching style is found
 
-        # Unassign the style from the active representation item.
-        tool.Style.assign_style_to_representation_item(active_representation_item, None)
-        tool.Geometry.reload_representation(active_obj)
-
-        # Iterate over other selected objects and unassign matching styles.
+        # Iterate over selected objects and unassign matching styles
         for obj in context.selected_objects:
             if obj == active_obj:
-                continue
+                continue  # Skip the active object itself
 
-            for item in get_base_representation_items(obj):
-                item_styles = set()
-                if hasattr(item, "StyledByItem"):
-                    for styled_by_item in item.StyledByItem:
+            # Get the IFC entity directly from the object
+            element = tool.Ifc.get_entity(obj)
+            if not element:
+                continue  # Skip if no IFC entity is found
+
+            representation_item_id = element.Representation.Representations[0].Items[0].id()
+            representation_item = tool.Ifc.get_entity_by_id(representation_item_id)
+
+            if representation_item:
+                # Retrieve styles for the current representation item
+                styles = set()
+                if hasattr(representation_item, "StyledByItem"):
+                    for styled_by_item in representation_item.StyledByItem:
                         if hasattr(styled_by_item, "Styles"):
-                            item_styles.update(styled_by_item.Styles)
+                            styles.update(styled_by_item.Styles)
 
-                if item_styles & active_styles:
-                    tool.Style.assign_style_to_representation_item(item, None)
-                    tool.Geometry.reload_representation(obj)
-                    break  # Only remove one matching style per object
+                # Unassign matching styles
+                for style in styles:
+                    if style in active_styles:
+                        tool.Style.assign_style_to_representation_item(representation_item, None)
+                        tool.Geometry.reload_representation(obj)
+                        break  # No need to check further if one matching style is found
 
+        # Reload UI items
         bpy.ops.bim.disable_editing_representation_items()
         bpy.ops.bim.enable_editing_representation_items()
-        return {"FINISHED"}
-
 
 
 class EnableEditingRepresentationItemShapeAspect(bpy.types.Operator, tool.Ifc.Operator):

src/bonsai/bonsai/bim/module/geometry/ui.py

@@ -17,9 +17,9 @@
 # along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
 
 import bpy
-import ifcopenshell.util.unit
 from bpy.types import Menu, Panel, UIList
 
+import ifcopenshell.util.unit
 import bonsai.bim
 import bonsai.tool as tool
 from bonsai.bim.helper import prop_with_search

src/bonsai/bonsai/bim/module/georeference/decorator.py

@@ -21,6 +21,7 @@ from math import radians
 import blf
 import gpu
 import ifcopenshell.util.geolocation
+from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
 from gpu_extras.batch import batch_for_shader
 from mathutils import Matrix, Vector
@@ -29,11 +30,27 @@ import bonsai.tool as tool
 from bonsai.bim.module.georeference.data import GeoreferenceData
 
 
-class GeoreferenceDecorator(tool.Blender.ViewportDecorator):
-    draw_methods = (
-        ("draw_text", "POST_PIXEL"),
-        ("draw_geometry", "POST_VIEW"),
-    )
+class GeoreferenceDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_text, (context,), "WINDOW", "POST_PIXEL"))
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_geometry, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
 
     def draw_batch(self, shader_type, content_pos, color, indices=None, should_scale=True):
         if not tool.Blender.validate_shader_batch_data(content_pos, indices):
@@ -180,10 +197,6 @@ class GeoreferenceDecorator(tool.Blender.ViewportDecorator):
         decorator_color_error = self.addon_prefs.decorator_color_error
 
         gpu.state.blend_set("ALPHA")
-        # The georef gizmo is a coordinate-system overlay: it must communicate
-        # orientation regardless of model contents, so depth testing is bypassed.
-        original_depth_test = gpu.state.depth_test_get()
-        gpu.state.depth_test_set("ALWAYS")
 
         self.line_shader = gpu.shader.from_builtin("POLYLINE_UNIFORM_COLOR")
         self.line_shader.bind()  # required to be able to change uniforms of the shader
@@ -322,8 +335,6 @@ class GeoreferenceDecorator(tool.Blender.ViewportDecorator):
                 self.draw_batch("LINES", verts, decorator_color_special, edges)
                 self.draw_dashed_line(location * 3, location * 6, decorator_color_error)
 
-        gpu.state.depth_test_set(original_depth_test)
-
     def draw_dashed_line(self, start, end, colour, should_scale=True):
         direction = (end - start).normalized()
         distance = (end - start).length

src/bonsai/bonsai/bim/module/light/decorator.py

@@ -20,18 +20,44 @@
 import blf
 import bpy
 import gpu
+from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
+from gpu_extras.batch import batch_for_shader
 from mathutils import Matrix, Vector
 
 import bonsai.tool as tool
 from bonsai.bim.module.light.data import SolarData
 
 
-class SolarDecorator(tool.Blender.ViewportDecorator):
-    draw_methods = (
-        ("draw_text", "POST_PIXEL"),
-        ("draw_geometry", "POST_VIEW"),
-    )
+class SolarDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_text, (context,), "WINDOW", "POST_PIXEL"))
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_geometry, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
 
     def draw_text(self, context: bpy.types.Context) -> None:
         self.addon_prefs = tool.Blender.get_addon_preferences()

src/bonsai/bonsai/bim/module/model/__init__.py

@@ -27,7 +27,6 @@ import bonsai.tool as tool
 from . import (
     array,
     covering,
-    decorator,
     door,
     external,
     grid,
@@ -111,9 +110,6 @@ classes = (
     wall.GizmoWallFilletPreview,
     wall.GizmoWallFilletReedit,
     wall.GizmoWallFilletToggleOpenings,
-    wall.GizmoPairDisconnect,
-    wall.GizmoSlabEdition,
-    wall.GizmoSlabUnjoinWalls,
     wall.GizmoWallJoinIntersection,
     wall.GizmoWallLinkToggle,
     wall.GizmoWallUnjoinSingle,
@@ -124,7 +120,7 @@ classes = (
     wall.RotateWall90,
     wall.SplitWall,
     wall.SplitWallAtCursor,
-    wall.DisconnectElements,
+    wall.UnjoinWallPathConnection,
     wall.UnjoinWalls,
     wall.EnableWallFilletPreview,
     wall.FinishWallFilletPreview,
@@ -158,14 +154,11 @@ classes = (
     slab.DisableEditingExtrusionProfile,
     slab.DisableEditingSketchExtrusionProfile,
     slab.AddSlabFromWall,
-    slab.CancelEditingSlab,
     slab.DrawPolylineSlab,
     slab.EditExtrusionProfile,
     slab.EditSketchExtrusionProfile,
     slab.EnableEditingExtrusionProfile,
     slab.EnableEditingSketchExtrusionProfile,
-    slab.EnableEditingSlab,
-    slab.FinishEditingSlab,
     slab.RecalculateSlab,
     slab.ResetVertex,
     slab.SetArcIndex,
@@ -192,7 +185,6 @@ classes = (
     prop.BIMDoorProperties,
     prop.BIMRailingProperties,
     prop.BIMRoofProperties,
-    prop.BIMSlabProperties,
     prop.BIMWallProperties,
     prop.BIMPipeSegmentProperties,
     prop.BIMDuctSegmentProperties,
@@ -254,13 +246,9 @@ classes = (
     railing.CopyRailingParameters,
     railing.AddRailing,
     railing.CancelEditingRailing,
-    railing.CycleRailingType,
     railing.FinishEditingRailing,
-    railing.PickRailingTerminalType,
     railing.FlipRailingPathOrder,
     railing.EnableEditingRailing,
-    railing.GizmoRailingSchematic,
-    railing.ToggleRailingUseManualSupports,
     railing.CancelEditingRailingPath,
     railing.FinishEditingRailingPath,
     railing.EnableEditingRailingPath,
@@ -281,7 +269,9 @@ classes = (
     mep.MEPAddObstruction,
     mep.MEPAddTransition,
     mep.MEPAddBend,
+    mep.MEPUnjoinAtPort,
     mep.MEPRemoveTerminalFitting,
+    mep.MEPUnjoinPair,
     mep.SelectMEPPathMembers,
     mep.MEPJoinSegments,
     mep_bend_preview.EnableBendPreview,
@@ -378,11 +368,6 @@ def unregister():
     # half-unloaded module state.
     opening.DecorationsHandler.uninstall()
 
-    # Network path overlays attach SpaceView3D draw handlers on toggle;
-    # uninstall here so addon disable / Blender shutdown doesn't leak them.
-    decorator.MEPSystemPathDecorator.uninstall()
-    decorator.WallSystemPathDecorator.uninstall()
-
     if not bpy.app.background:
         for tool_data in reversed(tools):
             bpy.utils.unregister_tool(tool_data.tool)

src/bonsai/bonsai/bim/module/model/array.py

@@ -329,7 +329,6 @@ class _ArrayEditMixin(ParametricEditMixinBase):
         # Unhide the (possibly newly-regenerated) children so the user sees
         # the committed result. Mirrors the hide in ``_enable_one``.
         cls._set_children_visibility(element, hidden=False)
-        tool.Array.select_only_parent(obj, context)
 
     @classmethod
     def _cancel_one(cls, obj: bpy.types.Object) -> None:
@@ -422,28 +421,18 @@ class RegenerateArray(bpy.types.Operator, tool.Ifc.Operator):
         pset = ifcopenshell.util.element.get_pset(parent_element, "BBIM_Array")
         arrays = json.loads(pset["Data"])
         pset = tool.Ifc.get().by_id(pset["id"])
-        # Coalesce host recuts across the child-delete loop, the regenerate,
-        # and the per-child opening mirror: each fans out its own host body
-        # recut without the batch wrapper.
-        with tool.Geometry.batch_host_recut():
-            for array in arrays:
-                for child in set(array["children"]):
-                    try:
-                        child_element = tool.Ifc.get().by_guid(child)
-                    except RuntimeError:
-                        continue
-                    if child_obj := tool.Ifc.get_object(child_element):
-                        tool.Geometry.delete_ifc_object(child_obj)
-                array["children"].clear()
-            # Always operate on the parent — this operator can be invoked with
-            # either the parent OR any array child as active_object (the per-child
-            # gizmo group fires it from a child selection). Using ``obj`` /
-            # ``element`` directly would feed a child to ``regenerate_array`` and
-            # constrain children against a sibling, silently corrupting the array.
-            tool.Model.regenerate_array(parent, arrays)
-            tool.Array.constrain_children_to_parent(parent_element)
-
-        tool.Array.select_only_parent(parent, context)
+        for array in arrays:
+            for child in set(array["children"]):
+                if child_obj := tool.Ifc.get_object(tool.Ifc.get().by_guid(child)):
+                    tool.Geometry.delete_ifc_object(child_obj)
+            array["children"].clear()
+        # Always operate on the parent — this operator can be invoked with
+        # either the parent OR any array child as active_object (the per-child
+        # gizmo group fires it from a child selection). Using ``obj`` /
+        # ``element`` directly would feed a child to ``regenerate_array`` and
+        # constrain children against a sibling, silently corrupting the array.
+        tool.Model.regenerate_array(parent, arrays)
+        tool.Array.constrain_children_to_parent(parent_element)
 
 
 class RemoveArray(bpy.types.Operator, tool.Ifc.Operator):
@@ -478,24 +467,23 @@ class RemoveArray(bpy.types.Operator, tool.Ifc.Operator):
         except:
             return {"FINISHED"}
 
-        with tool.Geometry.batch_host_recut():
-            if self.keep_objs:
-                tool.Array.bake_children_transform(element, self.item)
-                tool.Array.set_children_lock_state(element, self.item, False)
+        if self.keep_objs:
+            tool.Array.bake_children_transform(element, self.item)
+            tool.Array.set_children_lock_state(element, self.item, False)
 
-            if not self.keep_objs:
-                data[self.item]["count"] = 1
-            tool.Array.remove_constraints(parent_element)
-            tool.Model.regenerate_array(parent, data, array_layers_to_apply=[self.item] if self.keep_objs else [])
+        if not self.keep_objs:
+            data[self.item]["count"] = 1
+        tool.Array.remove_constraints(parent_element)
+        tool.Model.regenerate_array(parent, data, array_layers_to_apply=[self.item] if self.keep_objs else [])
 
-            pset = tool.Pset.get_element_pset(element, "BBIM_Array")
-            if len(data) == 1:
-                ifcopenshell.api.pset.remove_pset(tool.Ifc.get(), product=element, pset=pset)
-            else:
-                del data[self.item]
-                data = tool.Ifc.get().createIfcText(json.dumps(data))
-                ifcopenshell.api.pset.edit_pset(tool.Ifc.get(), pset=pset, properties={"Data": data})
-                tool.Array.constrain_children_to_parent(element)
+        pset = tool.Pset.get_element_pset(element, "BBIM_Array")
+        if len(data) == 1:
+            ifcopenshell.api.pset.remove_pset(tool.Ifc.get(), product=element, pset=pset)
+        else:
+            del data[self.item]
+            data = tool.Ifc.get().createIfcText(json.dumps(data))
+            ifcopenshell.api.pset.edit_pset(tool.Ifc.get(), pset=pset, properties={"Data": data})
+            tool.Array.constrain_children_to_parent(element)
 
 
 class SelectArrayParent(bpy.types.Operator):

src/bonsai/bonsai/bim/module/model/data.py

@@ -51,10 +51,6 @@ class AuthoringData:
 
     @classmethod
     def load(cls, ifc_element_type: Optional[str] = None):
-        # ``is_loaded`` is set first as a recursion guard: one of the data
-        # computations evaluates a PropertyGroup enum's ``items`` callback,
-        # which re-enters this method. Without the guard, load recurses to
-        # RecursionError.
         cls.is_loaded = True
         cls.props = tool.Model.get_model_props()
         cls.data["default_container"] = cls.default_container()

src/bonsai/bonsai/bim/module/model/decorator.py

@@ -21,7 +21,6 @@
 from __future__ import annotations
 
 import math
-from collections.abc import Sequence
 from math import cos, pi, radians, sin, tan
 from typing import Any, Literal, NamedTuple
 
@@ -44,7 +43,6 @@ from mathutils import Matrix, Quaternion, Vector
 
 import bonsai.core.geometry
 import bonsai.tool as tool
-from bonsai.bim.decorator_cache import TokenCache
 from bonsai.bim.module.drawing.gizmos import (
     ARC_SEGMENTS,
     DOOR_SWING_ANGLE_MAX,
@@ -53,44 +51,15 @@ from bonsai.bim.module.drawing.gizmos import (
 from bonsai.bim.module.drawing.helper import format_distance
 
 
-def highlight_color(color, alpha=0.1):
-    color = [i + (1 - i) * 0.5 for i in color]
+def transparent_color(color, alpha=0.1):
+    color = [i for i in color]
+    color[3] = alpha
     return color
 
 
-def _stroke_lines_alpha(
-    context: bpy.types.Context,
-    segments: list[tuple[tuple[float, float, float], tuple[float, float, float]]],
-    color_rgb: tuple[float, float, float],
-    line_width: float,
-    line_alpha: float,
-) -> None:
-    """Render ``segments`` (a list of (start, end) tuples) as one anti-aliased
-    LINES batch in world space. Early-returns when ``context.region`` is
-    unavailable (e.g. when called from a ``_RestrictContext``)."""
-    if not segments:
-        return
-    verts: list[tuple[float, float, float]] = []
-    indices: list[tuple[int, int]] = []
-    for start, end in segments:
-        base = len(verts)
-        verts.append(tuple(start))
-        verts.append(tuple(end))
-        indices.append((base, base + 1))
-    if not tool.Blender.validate_shader_batch_data(verts, indices):
-        return
-    region = getattr(context, "region", None)
-    if region is None:
-        return
-    shader = gpu.shader.from_builtin("POLYLINE_UNIFORM_COLOR")
-    shader.bind()
-    shader.uniform_float("viewportSize", (region.width, region.height))
-    shader.uniform_float("lineWidth", line_width)
-    shader.uniform_float("color", (*color_rgb, line_alpha))
-    batch = batch_for_shader(shader, "LINES", {"pos": verts}, indices=indices)
-    gpu.state.blend_set("ALPHA")
-    batch.draw(shader)
-    gpu.state.blend_set("NONE")
+def highlight_color(color, alpha=0.1):
+    color = [i + (1 - i) * 0.5 for i in color]
+    return color
 
 
 class ProfileDecorator:
@@ -127,7 +96,7 @@ class ProfileDecorator:
 
     def draw_faces(self, bm, vertices_coords):
         """Submit a non-mutating beauty-triangulated TRIS batch over ``bm``'s faces."""
-        faces_color = tool.Blender.transparent_color(self.addon_prefs.decorator_color_special)
+        faces_color = transparent_color(self.addon_prefs.decorator_color_special)
         tool.Blender.draw_bmesh_face_tris(bm, vertices_coords, faces_color, self.draw_batch)
 
     def __call__(self, context, get_custom_bmesh=None, draw_faces=False, exit_edit_mode_callback=None):
@@ -257,7 +226,7 @@ class ProfileDecorator:
         self.draw_batch("LINES", all_vertices, unselected_elements_color, unselected_edges)
         self.draw_batch("LINES", all_vertices, selected_elements_color, selected_edges)
 
-        self.draw_batch("POINTS", unselected_vertices, tool.Blender.transparent_color(unselected_elements_color, 0.5))
+        self.draw_batch("POINTS", unselected_vertices, transparent_color(unselected_elements_color, 0.5))
         self.draw_batch("POINTS", error_vertices, error_elements_color)
         self.draw_batch("POINTS", special_vertices, special_elements_color)
         self.draw_batch("POINTS", selected_vertices, selected_elements_color)
@@ -348,11 +317,9 @@ class ProfileDecorator:
         return points, listEdg
 
 
-class PolylineDecorator(tool.Blender.ViewportDecorator):
-    # draw_methods declares only the always-bound handler so the base's
-    # __init_subclass__ validation passes; the override install below
-    # conditionally registers up to four more handlers based on ui_only.
-    draw_methods = (("draw_input_ui", "POST_PIXEL"),)
+class PolylineDecorator:
+    is_installed = False
+    handlers = []
     event = None
     input_type = None
     input_ui = None
@@ -388,6 +355,15 @@ class PolylineDecorator(tool.Blender.ViewportDecorator):
             cls.handlers.append(SpaceView3D.draw_handler_add(handler, (context,), "WINDOW", "POST_VIEW"))
         cls.is_installed = True
 
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
     @classmethod
     def update(
         cls,
@@ -446,6 +422,14 @@ class PolylineDecorator(tool.Blender.ViewportDecorator):
 
         return {"verts": verts, "edges": edges, "tris": tris}
 
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
+
     def shader_config(self, context):
         self.addon_prefs = tool.Blender.get_addon_preferences()
         self.decorator_color = self.addon_prefs.decorations_colour
@@ -713,9 +697,7 @@ class PolylineDecorator(tool.Blender.ViewportDecorator):
             if self.polyline_data.measurement_type == "POLY_AREA" and area:
                 if float(area) > 0:
                     tris = self.calculate_polygon(polyline_verts)["tris"]
-                    self.draw_batch(
-                        "TRIS", polyline_verts, tool.Blender.transparent_color(self.decorator_color_special), tris
-                    )
+                    self.draw_batch("TRIS", polyline_verts, transparent_color(self.decorator_color_special), tris)
 
         # Draw polyline with selected points
         self.line_shader.uniform_float("lineWidth", 2.0)
@@ -968,8 +950,9 @@ class PolylineDecorator(tool.Blender.ViewportDecorator):
             self.draw_batch("LINES", polyline_verts, decorator_color_unselected, polyline_edges)
 
 
-class ProductDecorator(tool.Blender.ViewportDecorator):
-    draw_method = "draw_product_preview"
+class ProductDecorator:
+    is_installed = False
+    handlers = []
     preview_mode: Literal["PROFILE_VERTICAL", "PROFILE_HORIZONTAL", "LAYER2", "LAYER3", "GENERIC"]
     relating_type = None
     obj_data: dict[str, list] = {}
@@ -1012,7 +995,29 @@ class ProductDecorator(tool.Blender.ViewportDecorator):
         )
         cls.is_installed = True
 
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
+
     def draw_product_preview(self, context):
+        def transparent_color(color, alpha=0.1):
+            color = [i for i in color]
+            color[3] = alpha
+            return color
+
         self.addon_prefs = tool.Blender.get_addon_preferences()
         self.line_shader = gpu.shader.from_builtin("POLYLINE_UNIFORM_COLOR")
         self.line_shader.bind()  # required to be able to change uniforms of the shader
@@ -1044,7 +1049,7 @@ class ProductDecorator(tool.Blender.ViewportDecorator):
             data = self.get_generic_preview_data()
         if data:
             self.draw_batch("LINES", data["verts"], decorator_color, data["edges"])
-            self.draw_batch("TRIS", data["verts"], tool.Blender.transparent_color(decorator_color), data["tris"])
+            self.draw_batch("TRIS", data["verts"], transparent_color(decorator_color), data["tris"])
 
     def get_wall_preview_data(self):
         relating_type = self.relating_type
@@ -1577,8 +1582,34 @@ class ProductDecorator(tool.Blender.ViewportDecorator):
         return data
 
 
-class WallAxisDecorator(tool.Blender.ViewportDecorator):
-    draw_method = "draw_wall_axis"
+class WallAxisDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_wall_axis, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
 
     def draw_wall_axis(self, context):
         self.addon_prefs = tool.Blender.get_addon_preferences()
@@ -1597,7 +1628,7 @@ class WallAxisDecorator(tool.Blender.ViewportDecorator):
         self.line_shader.uniform_float("lineWidth", 2.0)
         for obj in context.selected_objects:
             element = tool.Ifc.get_entity(obj)
-            if element and element.is_a("IfcWall"):
+            if element.is_a("IfcWall"):
                 layers = tool.Model.get_material_layer_parameters(element)
                 axis = tool.Model.get_wall_axis(obj, layers)
                 side = [tuple(list(v) + [obj.location.z]) for v in axis["side"]]
@@ -1617,8 +1648,34 @@ class WallAxisDecorator(tool.Blender.ViewportDecorator):
                 self.draw_batch("LINES", arrow, unselected_elements_color, [(0, 1), (1, 2), (1, 3)])
 
 
-class SlabDirectionDecorator(tool.Blender.ViewportDecorator):
-    draw_method = "draw_wall_axis"
+class SlabDirectionDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_wall_axis, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
 
     def draw_wall_axis(self, context):
         self.addon_prefs = tool.Blender.get_addon_preferences()
@@ -1648,10 +1705,41 @@ class SlabDirectionDecorator(tool.Blender.ViewportDecorator):
             self.draw_batch("LINES", base, selected_elements_color, [(0, 1)])
 
 
-class FaceAreaDecorator(tool.Blender.ViewportDecorator):
-    draw_method = "draw_face_area"
+class FaceAreaDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_face_area, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
 
     def draw_face_area(self, context):
+        def transparent_color(color, alpha=0.1):
+            color = [i for i in color]
+            color[3] = alpha
+            return color
+
         self.addon_prefs = tool.Blender.get_addon_preferences()
         self.line_shader = gpu.shader.from_builtin("POLYLINE_UNIFORM_COLOR")
         self.line_shader.bind()  # required to be able to change uniforms of the shader
@@ -1672,16 +1760,12 @@ class FaceAreaDecorator(tool.Blender.ViewportDecorator):
             if data:
                 self.draw_batch("POINTS", data["verts"], decorator_color)
                 self.draw_batch("LINES", data["verts"], decorator_color, data["edges"])
-                self.draw_batch(
-                    "TRIS", data["verts"], tool.Blender.transparent_color(decorator_color, alpha=0.5), data["tris"]
-                )
+                self.draw_batch("TRIS", data["verts"], transparent_color(decorator_color, alpha=0.5), data["tris"])
 
 
-class BoundingBoxDecorator(tool.Blender.ViewportDecorator):
-    draw_methods = (
-        ("draw_bounding_box_wire_cube", "POST_VIEW"),
-        ("draw_dimension_text", "POST_PIXEL"),
-    )
+class BoundingBoxDecorator:
+    is_installed = False
+    handlers = []
 
     def __init__(self):
         context = bpy.context
@@ -1692,6 +1776,31 @@ class BoundingBoxDecorator(tool.Blender.ViewportDecorator):
         self.decorator_color_wire = (*theme.view_3d.bone_solid, 1)
         self.decorator_color_special = tool.Blender.get_addon_preferences().decorator_color_special
 
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(
+            bpy.types.SpaceView3D.draw_handler_add(
+                handler.draw_bounding_box_wire_cube, (context,), "WINDOW", "POST_VIEW"
+            )
+        )
+        cls.handlers.append(
+            bpy.types.SpaceView3D.draw_handler_add(handler.draw_dimension_text, (context,), "WINDOW", "POST_PIXEL")
+        )
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                bpy.types.SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except Exception:
+                pass
+        cls.handlers.clear()
+        cls.is_installed = False
+
     @staticmethod
     def get_combined_bounding_box_corners(objects):
 
@@ -1764,6 +1873,14 @@ class BoundingBoxDecorator(tool.Blender.ViewportDecorator):
         ]
         return trihedron[best_origin]
 
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
+
     def draw_text_background(self, context, coords_dim, text_dim):
         padding = 5
         theme = context.preferences.themes.items()[0][1]
@@ -1915,6 +2032,46 @@ class BoundingBoxDecorator(tool.Blender.ViewportDecorator):
                             co2.y -= y_overlap / 2 + min_spacing
 
 
+def _fill_quads_alpha(
+    context: bpy.types.Context,
+    quads: list[
+        tuple[
+            tuple[float, float, float],
+            tuple[float, float, float],
+            tuple[float, float, float],
+            tuple[float, float, float],
+        ]
+    ],
+    color_rgb: tuple[float, float, float],
+    alpha: float,
+) -> None:
+    """Render ``quads`` (each a 4-tuple of world-space corner verts in CCW
+    order) as one TRIS batch with two triangles per quad."""
+    if not quads:
+        return
+    verts: list[tuple[float, float, float]] = []
+    indices: list[tuple[int, int, int]] = []
+    for quad in quads:
+        if len(quad) != 4:
+            continue
+        base = len(verts)
+        verts.extend(tuple(v) for v in quad)
+        indices.append((base, base + 1, base + 2))
+        indices.append((base, base + 2, base + 3))
+    if not tool.Blender.validate_shader_batch_data(verts, indices):
+        return
+    region = getattr(context, "region", None)
+    if region is None:
+        return
+    shader = gpu.shader.from_builtin("UNIFORM_COLOR")
+    shader.bind()
+    shader.uniform_float("color", (*color_rgb, alpha))
+    batch = batch_for_shader(shader, "TRIS", {"pos": verts}, indices=indices)
+    gpu.state.blend_set("ALPHA")
+    batch.draw(shader)
+    gpu.state.blend_set("NONE")
+
+
 def compute_mep_join_location():
     """Midpoint between the closest endpoint pair of two selected MEP
     segments — the world location where a connecting fitting (bend /
@@ -2372,481 +2529,3 @@ def draw_polyline_segments(
 
 _BBOX_HIGHLIGHT_LINE_WIDTH = 1.8
 _BBOX_HIGHLIGHT_LINE_ALPHA = 0.8
-
-
-class _ConnectedNetworkPathDecorator(tool.Blender.ViewportDecorator):
-    """Shared scaffolding for "BFS-walk a connected IFC network from a selected
-    seed and overlay its schematic path" viewport decorators.
-
-    Subclasses implement three hooks:
-
-        ``_is_seed_element(element)``: True if ``element`` can seed a walk
-        ``_walk(start_element)``: list of network elements reachable from the seed
-        ``_build_geometry(connected)``: ``(lines, free_points, connection_points)``
-          for one walk pass; free dots render in the base selected color,
-          connection dots in the "special" slot so junctions stand out
-
-    Lifecycle each redraw: gate on ``BIMModelProperties.show_paths`` (the
-    shared toggle for all network-path overlays), find the first selected
-    seed element, walk the network (cached per seed-GUID per IFC file), and
-    render lines + connection-node dots. Geometry is memoised through a
-    ``TokenCache`` keyed on the decorator-cache token, so depsgraph / undo /
-    redo / load all invalidate the resolved world-space pass without
-    re-walking.
-
-    Install / uninstall is driven by the central addon-load handler and
-    by the toggle's ``update`` callback, so flipping the property takes
-    effect immediately without a Blender restart."""
-
-    # Network-path lines + junction dots render in ``decorator_color_selected``
-    # (Bonsai's palette slot for "what the user is currently inspecting"); free
-    # endpoints (dangling chain tips) switch to ``decorator_color_special`` so
-    # the end of the line stands apart from interior junctions at a glance.
-    LINE_WIDTH = 1.3
-    LINE_ALPHA = 0.85
-    # Sized larger than LINE_WIDTH so connection nodes read as discrete
-    # points rather than line thickenings.
-    DOT_SIZE = 4.0
-    # Squared distance under which two emitted dots are treated as the same
-    # connection node. In Blender units (typically meters), 1e-4 m ≈ 0.1 mm
-    # — below the precision at which two IFC reference-line endpoints would
-    # ever be authored as "the same join" but not so tight that float drift
-    # from coordinate composition misses a real coincidence.
-    CONNECTION_EPS_SQ = 1e-4 * 1e-4
-
-    def __init__(self) -> None:
-        # Walk cache keyed on (start_guid, ifc_file, geom_gen). Stores STEP
-        # integer ids rather than ``entity_instance`` references — re-resolved
-        # via ``ifc_file.by_id`` on each cache hit. Structurally rules out
-        # the dangling-SWIG-handle class of bug: an entity removed between
-        # frames either bumps geom_gen (cache miss → re-walk) or fails to
-        # re-resolve (handled below by re-walking). Compare ``ifc_file`` with
-        # ``is`` (not id()) so a GC-recycled id() can't produce a false hit.
-        self._cached_start_guid: str | None = None
-        self._cached_ifc_file: Any = None
-        self._cached_geom_gen: int = -1
-        self._cached_walk_ids: list[int] = []
-        # Geometry cache: shared TokenCache. Key folds in geom_gen so IFC
-        # mutations that don't surface via the depsgraph still flush the
-        # resolved world-space lines and dots.
-        self._geom_cache: TokenCache[
-            tuple[
-                list[tuple[tuple[float, float, float], tuple[float, float, float]]],
-                list[tuple[float, float, float]],
-                list[tuple[float, float, float]],
-            ]
-        ] = TokenCache()
-        # One-shot guards so a corrupted walk or build surfaces in the console
-        # once per decorator instance instead of every redraw.
-        self._walk_failure_logged: bool = False
-        self._build_failure_logged: bool = False
-        # Short-circuit re-running a known-broken walk or build for the same
-        # seed every frame; cleared the moment the user picks a different seed.
-        self._failed_seed_guid: str | None = None
-
-    _ABSTRACT_HOOKS = ("_is_seed_element", "_walk", "_build_geometry")
-
-    def __init_subclass__(cls, **kwargs):
-        super().__init_subclass__(**kwargs)
-        # Pin the template-method contract at class-definition time, mirroring
-        # ViewportDecorator's draw_method check: a subclass that forgets to
-        # override one of the three hooks would otherwise pass class creation
-        # and only raise NotImplementedError on the first walk — deferred long
-        # past the offending declaration.
-        missing = [
-            name for name in cls._ABSTRACT_HOOKS if getattr(cls, name) is getattr(_ConnectedNetworkPathDecorator, name)
-        ]
-        if missing:
-            raise TypeError(f"{cls.__name__}: must override abstract hook(s) {sorted(missing)}")
-
-    def _is_seed_element(self, element: Any) -> bool:
-        raise NotImplementedError
-
-    def _walk(self, start_element: Any) -> list[Any]:
-        raise NotImplementedError
-
-    def _build_geometry(
-        self,
-        connected: list[Any],
-    ) -> tuple[
-        list[tuple[tuple[float, float, float], tuple[float, float, float]]],
-        list[tuple[float, float, float]],
-        list[tuple[float, float, float]],
-    ]:
-        """Resolve world-space line segments + dots for one walk pass. Returns
-        ``(lines, free_points, connection_points)`` — free dots get the base
-        selected color, connection dots get the special color so junctions
-        between two consecutive elements pop out. Never raises; skips
-        degenerate elements."""
-        raise NotImplementedError
-
-    @classmethod
-    def _partition_points_by_coincidence(
-        cls,
-        points: list[tuple[float, float, float]],
-        lines: Sequence[tuple[tuple[float, float, float], tuple[float, float, float]]] = (),
-    ) -> tuple[list[tuple[float, float, float]], list[tuple[float, float, float]]]:
-        """Split ``points`` into ``(free, connection)``. A point is "connection"
-        when (a) at least one other point in the list lies within
-        ``CONNECTION_EPS_SQ`` (corner / end-to-end joins), or (b) it lies within
-        ``CONNECTION_EPS_SQ`` of the interior of any segment in ``lines``
-        (T-junctions / ATPATH joins, where one wall's end lands on another
-        wall's axis interior rather than its endpoint). Connection points
-        dedupe to one representative each so coincident dots don't stack the
-        same color."""
-        eps_sq = cls.CONNECTION_EPS_SQ
-        n = len(points)
-        shared = [False] * n
-        for i in range(n):
-            xi, yi, zi = points[i]
-            for j in range(i + 1, n):
-                xj, yj, zj = points[j]
-                dx, dy, dz = xi - xj, yi - yj, zi - zj
-                if dx * dx + dy * dy + dz * dz <= eps_sq:
-                    shared[i] = True
-                    shared[j] = True
-        for i, point in enumerate(points):
-            if shared[i]:
-                continue
-            if cls._point_touches_any_segment_interior(point, lines, eps_sq):
-                shared[i] = True
-        free: list[tuple[float, float, float]] = []
-        connection: list[tuple[float, float, float]] = []
-        seen_connection: list[tuple[float, float, float]] = []
-        for i, point in enumerate(points):
-            if not shared[i]:
-                free.append(point)
-                continue
-            for existing in seen_connection:
-                dx, dy, dz = point[0] - existing[0], point[1] - existing[1], point[2] - existing[2]
-                if dx * dx + dy * dy + dz * dz <= eps_sq:
-                    break
-            else:
-                seen_connection.append(point)
-                connection.append(point)
-        return free, connection
-
-    @staticmethod
-    def _point_touches_any_segment_interior(
-        point: tuple[float, float, float],
-        lines: Sequence[tuple[tuple[float, float, float], tuple[float, float, float]]],
-        eps_sq: float,
-    ) -> bool:
-        """True iff ``point`` lies within ``sqrt(eps_sq)`` of the interior of
-        any segment in ``lines``. Endpoints are excluded so a point cannot
-        match its own owning segment via either of that segment's tips — the
-        endpoint-coincidence pass already handles those cases. The qualifying
-        projection must land strictly inside the segment (``0 < t < 1``) AND
-        sit further than ``eps`` from either tip, catching ATPATH/T-junction
-        joins without false-flagging walls that share a corner."""
-        px, py, pz = point
-        for (ax, ay, az), (bx, by, bz) in lines:
-            dxa, dya, dza = px - ax, py - ay, pz - az
-            if dxa * dxa + dya * dya + dza * dza <= eps_sq:
-                continue
-            dxb, dyb, dzb = px - bx, py - by, pz - bz
-            if dxb * dxb + dyb * dyb + dzb * dzb <= eps_sq:
-                continue
-            ex, ey, ez = bx - ax, by - ay, bz - az
-            seg_len_sq = ex * ex + ey * ey + ez * ez
-            if seg_len_sq <= eps_sq:
-                continue
-            t = (dxa * ex + dya * ey + dza * ez) / seg_len_sq
-            if t <= 0.0 or t >= 1.0:
-                continue
-            qx, qy, qz = ax + t * ex, ay + t * ey, az + t * ez
-            dx, dy, dz = px - qx, py - qy, pz - qz
-            if dx * dx + dy * dy + dz * dz <= eps_sq:
-                return True
-        return False
-
-    def draw(self, context: bpy.types.Context) -> None:
-        model_props = tool.Model.get_model_props()
-        if not getattr(model_props, "show_paths", False):
-            return
-        ifc_file = tool.Ifc.get()
-        if ifc_file is None:
-            return
-
-        start_element = None
-        active = context.active_object
-        if active is not None:
-            element = tool.Ifc.get_entity(active)
-            if element is not None and self._is_seed_element(element):
-                start_element = element
-        if start_element is None:
-            for obj in context.selected_objects or []:
-                if obj is active:
-                    continue
-                element = tool.Ifc.get_entity(obj)
-                if element is None or not self._is_seed_element(element):
-                    continue
-                start_element = element
-                break
-        if start_element is None:
-            self._cached_start_guid = None
-            self._cached_walk = []
-            return
-
-        start_guid = start_element.GlobalId
-        if start_guid == self._failed_seed_guid:
-            return
-        current_geom_gen = tool.Parametric.get_geom_generation()
-        connected: list[Any] | None = None
-        if (
-            start_guid == self._cached_start_guid
-            and ifc_file is self._cached_ifc_file
-            and current_geom_gen == self._cached_geom_gen
-            and self._cached_walk_ids
-        ):
-            try:
-                connected = [ifc_file.by_id(eid) for eid in self._cached_walk_ids]
-            except RuntimeError:
-                # An entity was removed without bumping geom_gen — rare but
-                # possible from non-operator code paths. Force a re-walk
-                # rather than feeding a stale handle to _build_geometry.
-                connected = None
-        if connected is None:
-            try:
-                connected = self._walk(start_element)
-            except Exception:
-                if not self._walk_failure_logged:
-                    import traceback
-
-                    traceback.print_exc()
-                    self._walk_failure_logged = True
-                self._cached_walk_ids = []
-                self._failed_seed_guid = start_guid
-                return
-            self._cached_start_guid = start_guid
-            self._cached_ifc_file = ifc_file
-            self._cached_geom_gen = current_geom_gen
-            self._cached_walk_ids = [e.id() for e in connected]
-        if not connected:
-            return
-
-        prefs = tool.Blender.get_addon_preferences()
-        line_color = tuple(prefs.decorator_color_selected[:3])
-        # Junction dots get the "selected" palette slot (green by default) so
-        # they read as the currently-inspected network's spine; free endpoints
-        # get the "special" slot (blue by default) so dangling line ends stand
-        # apart from junctions at a glance.
-        connection_color = line_color
-        free_color = tuple(prefs.decorator_color_special[:3])
-
-        try:
-            lines, free_points, connection_points = self._geom_cache.get_or_compute(
-                (start_guid, id(ifc_file), current_geom_gen),
-                lambda: self._build_geometry(connected),
-            )
-        except Exception:
-            if not self._build_failure_logged:
-                import traceback
-
-                traceback.print_exc()
-                self._build_failure_logged = True
-            self._failed_seed_guid = start_guid
-            return
-
-        if lines:
-            _stroke_lines_alpha(context, lines, line_color, self.LINE_WIDTH, self.LINE_ALPHA)
-
-        if free_points or connection_points:
-            # POINTS via UNIFORM_COLOR; point_size_set only affects the next batch.
-            point_shader = gpu.shader.from_builtin("UNIFORM_COLOR")
-            point_shader.bind()
-            gpu.state.point_size_set(self.DOT_SIZE)
-            gpu.state.blend_set("ALPHA")
-            if free_points:
-                point_shader.uniform_float("color", (*free_color, self.LINE_ALPHA))
-                batch = batch_for_shader(point_shader, "POINTS", {"pos": free_points})
-                batch.draw(point_shader)
-            if connection_points:
-                point_shader.uniform_float("color", (*connection_color, self.LINE_ALPHA))
-                batch = batch_for_shader(point_shader, "POINTS", {"pos": connection_points})
-                batch.draw(point_shader)
-            gpu.state.blend_set("NONE")
-
-
-class MEPSystemPathDecorator(_ConnectedNetworkPathDecorator):
-    """Schematic-path overlay for the selected MEP element's connected
-    distribution system.
-
-    Walk: BFS through ``IfcRelConnectsPorts`` from the first selected MEP
-    element. Segments render as one axis line + endpoint dots. Fittings
-    render as:
-
-    - 2-port (transition, coupler, bend): one line port-to-port, keeping
-      the schematic continuous through the fitting. The "spider from
-      origin" pattern produces V-shaped flares when the fitting's local
-      origin is offset from its ports.
-    - 3+-port (tee, cross, branching): spider from origin to each port.
-      Drawing all N*(N-1)/2 port pairs would clutter the view at high N
-      (N=4 → 6 lines); the spider gives one line per port.
-    - 0-port / 1-port: degenerate, no lines (dots still emit)."""
-
-    def _is_seed_element(self, element: Any) -> bool:
-        return tool.System.is_mep_element(element)
-
-    def _walk(self, start_element: Any) -> list[Any]:
-        return tool.System.walk_connected_mep_elements(start_element)
-
-    def _build_geometry(
-        self,
-        connected: list[Any],
-    ) -> tuple[
-        list[tuple[tuple[float, float, float], tuple[float, float, float]]],
-        list[tuple[float, float, float]],
-        list[tuple[float, float, float]],
-    ]:
-        lines: list[tuple[tuple[float, float, float], tuple[float, float, float]]] = []
-        port_positions: list[tuple[float, float, float]] = []
-        for element in connected:
-            if element and element.is_a("IfcFlowSegment"):
-                if not tool.Geometry.has_axis_representation(element):
-                    continue
-                obj = tool.Ifc.get_object(element)
-                if obj is None:
-                    continue
-                start_world, end_world = tool.Model.get_flow_segment_axis(obj)
-                lines.append((tuple(start_world), tuple(end_world)))
-                # Segment ports sit at the two axis endpoints — emit dots so
-                # the connection node is visible whether the neighbour is a
-                # fitting (also emits) or another segment (doesn't).
-                port_positions.append(tuple(start_world))
-                port_positions.append(tuple(end_world))
-            elif element.is_a("IfcFlowFitting"):
-                obj = tool.Ifc.get_object(element)
-                if obj is None:
-                    continue
-                ports = tool.System.get_ports(element)
-                port_world_positions = [tool.System.get_port_world_position(p) for p in ports]
-                if len(port_world_positions) == 2:
-                    lines.append((tuple(port_world_positions[0]), tuple(port_world_positions[1])))
-                elif len(port_world_positions) >= 3:
-                    origin = obj.matrix_world.translation
-                    for port_pos in port_world_positions:
-                        lines.append((tuple(origin), tuple(port_pos)))
-                for port_pos in port_world_positions:
-                    port_positions.append(tuple(port_pos))
-        free_points, connection_points = self._partition_points_by_coincidence(port_positions)
-        return lines, free_points, connection_points
-
-
-class WallSystemPathDecorator(_ConnectedNetworkPathDecorator):
-    """Schematic-path overlay for the selected wall's connected wall network.
-
-    Walk: BFS through ``IfcRelConnectsPathElements`` from the first selected
-    wall. Each wall renders as one reference-line segment + a dot at each
-    axis endpoint. Endpoints are classified by IFC topology — every wall in
-    the walked set inspects its ``IfcRelConnectsPathElements`` rels filtered
-    to walls in the same set, and uses ``Relating*``/``Related*ConnectionType``
-    (ATSTART / ATEND / ATPATH) to decide which endpoint participates. ATPATH
-    rels also emit a connection dot at the canonical join location (a T-meets
-    point sits on the through-wall's interior, not at any endpoint). The
-    framework's geometric classifier is bypassed for walls because authoring
-    tolerance and post-edit float drift commonly exceed the 0.1 mm coincidence
-    threshold, so T-junctions otherwise fell into the free bucket."""
-
-    def _is_seed_element(self, element: Any) -> bool:
-        return element.is_a("IfcWall") and tool.Geometry.has_axis_representation(element)
-
-    def _walk(self, start_element: Any) -> list[Any]:
-        return tool.Wall.walk_connected_walls(start_element)
-
-    def _build_geometry(
-        self,
-        connected: list[Any],
-    ) -> tuple[
-        list[tuple[tuple[float, float, float], tuple[float, float, float]]],
-        list[tuple[float, float, float]],
-        list[tuple[float, float, float]],
-    ]:
-        lines: list[tuple[tuple[float, float, float], tuple[float, float, float]]] = []
-        refs: dict[int, tuple[tuple[float, float, float], tuple[float, float, float]]] = {}
-        for element in connected:
-            obj = tool.Ifc.get_object(element)
-            if obj is None:
-                continue
-            ref = tool.Wall.get_world_reference_line(obj)
-            if ref is None:
-                continue
-            p1, p2 = tuple(ref[0]), tuple(ref[1])
-            refs[element.id()] = (p1, p2)
-            lines.append((p1, p2))
-
-        free_points, connection_points = self._classify_endpoints_from_rels(connected, refs)
-        connection_points = self._dedupe_close_points(connection_points, self.CONNECTION_EPS_SQ)
-        return lines, free_points, connection_points
-
-    @staticmethod
-    def _classify_endpoints_from_rels(
-        connected: Sequence[Any],
-        refs: dict[int, tuple[tuple[float, float, float], tuple[float, float, float]]],
-    ) -> tuple[list[tuple[float, float, float]], list[tuple[float, float, float]]]:
-        """For each wall in ``connected`` with a reference line in ``refs``,
-        classify its endpoints by walking its ``IfcRelConnectsPathElements``
-        rels filtered to walls also in ``refs``. ATSTART side present →
-        reference-line start is a connection; ATEND side present → reference-
-        line end is a connection; otherwise free. ATPATH side present → emit
-        an extra connection dot at the canonical join via
-        ``tool.Wall.path_connection_location_world``. Returns
-        ``(free, connection)`` un-deduped."""
-        free_points: list[tuple[float, float, float]] = []
-        connection_points: list[tuple[float, float, float]] = []
-        for element in connected:
-            self_seg = refs.get(element.id())
-            if self_seg is None:
-                continue
-            sides: set[str] = set()
-            atpath_dots: list[tuple[float, float, float]] = []
-            for rel in getattr(element, "ConnectedTo", []) or ():
-                if not rel.is_a("IfcRelConnectsPathElements"):
-                    continue
-                other = rel.RelatedElement
-                other_seg = refs.get(other.id()) if other is not None else None
-                if other_seg is None:
-                    continue
-                self_type = rel.RelatingConnectionType
-                other_type = rel.RelatedConnectionType
-                sides.add(self_type)
-                if self_type == "ATPATH":
-                    join = tool.Wall.path_connection_location_world(self_seg, self_type, other_seg, other_type)
-                    atpath_dots.append(tuple(join))
-            for rel in getattr(element, "ConnectedFrom", []) or ():
-                if not rel.is_a("IfcRelConnectsPathElements"):
-                    continue
-                other = rel.RelatingElement
-                other_seg = refs.get(other.id()) if other is not None else None
-                if other_seg is None:
-                    continue
-                self_type = rel.RelatedConnectionType
-                other_type = rel.RelatingConnectionType
-                sides.add(self_type)
-                if self_type == "ATPATH":
-                    join = tool.Wall.path_connection_location_world(self_seg, self_type, other_seg, other_type)
-                    atpath_dots.append(tuple(join))
-            p1, p2 = self_seg
-            (connection_points if "ATSTART" in sides else free_points).append(p1)
-            (connection_points if "ATEND" in sides else free_points).append(p2)
-            connection_points.extend(atpath_dots)
-        return free_points, connection_points
-
-    @staticmethod
-    def _dedupe_close_points(
-        points: Sequence[tuple[float, float, float]],
-        eps_sq: float,
-    ) -> list[tuple[float, float, float]]:
-        """Drop later occurrences of points within ``sqrt(eps_sq)`` of an
-        earlier one. Used to collapse overlapping connection dots so an ATPATH
-        join computed at the same point as a neighbour's wall endpoint
-        renders once."""
-        result: list[tuple[float, float, float]] = []
-        for point in points:
-            for existing in result:
-                dx, dy, dz = point[0] - existing[0], point[1] - existing[1], point[2] - existing[2]
-                if dx * dx + dy * dy + dz * dz <= eps_sq:
-                    break
-            else:
-                result.append(point)
-        return result

src/bonsai/bonsai/bim/module/model/host_add_opening_gizmo.py

@@ -33,7 +33,6 @@ from mathutils import Vector
 
 import bonsai.tool as tool
 from bonsai.bim.module.drawing import gizmos as gizmo
-from bonsai.bim.module.model.opening import is_filling_supported
 from bonsai.bim.module.model.wall import (
     _get_wall_geom_cached,
     _wall_camera_facing_icon_y,
@@ -53,20 +52,6 @@ def is_supported_host(element) -> bool:
     return tool.Parametric.is_path_connectable_wall(element) or element.is_a("IfcSlab") or element.is_a("IfcRoof")
 
 
-def is_supported_filling_or_opening(element) -> bool:
-    """Total predicate for the add-opening gizmo poll. ``None`` (raw Blender
-    mesh) is accepted because the operator converts unclassified meshes
-    into ``IfcOpeningElement`` instances. ``IfcOpeningElement`` is accepted
-    because reassigning an existing opening to a new host is a legal path
-    through the operator. Otherwise defer to the generator's own
-    supported-filling predicate."""
-    if element is None:
-        return True
-    if element.is_a("IfcOpeningElement"):
-        return True
-    return is_filling_supported(element)
-
-
 def _resolve_active_host(context: bpy.types.Context, n_selected: int):
     """Shared poll prologue: gizmo gate + selection cardinality + active-in-
     selected + IFC entity lookup + supported-host predicate. Returns the
@@ -87,14 +72,12 @@ def _resolve_active_host(context: bpy.types.Context, n_selected: int):
 
 
 class GizmoHostAddOpening(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMixin):
-    """Activates when exactly two objects are selected and one is a fillable
-    host (wall / slab / roof) while the other is a valid filling (door /
-    window / existing opening, or a plain Blender mesh).
+    """Activates when a host element (wall / slab / roof) is the active object
+    and exactly one other selected object is *not* itself a host.
 
-    Selection-order independent: the host role is identified by class, not
-    by active state. The "+" icon anchors on the host's surface regardless
-    of which object was clicked first. The dispatched ``bim.add_opening``
-    operator also handles either order.
+    Renders a single ``VIEW3D_GT_add_opening`` icon at the void object's
+    projected location on the host. A click dispatches ``bim.add_opening``,
+    which handles any element exposing the ``HasOpenings`` inverse.
 
     Per-frame positioning keeps the icon facing the camera as the viewport
     orbits."""
@@ -107,29 +90,22 @@ class GizmoHostAddOpening(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMixin
 
     @classmethod
     def poll(cls, context: bpy.types.Context) -> bool:
-        if not _wall_gizmo_poll_gate(context):
+        element = _resolve_active_host(context, n_selected=2)
+        if element is None:
             return False
-        selected = list(tool.Blender.get_selected_objects())
-        if len(selected) != 2:
+        # The operator itself filters on HasOpenings, but checking here keeps
+        # the icon from appearing on host classes that can't accept openings
+        # in the active IFC schema.
+        if not hasattr(element, "HasOpenings"):
             return False
         active = context.active_object
-        if active is None or active not in selected:
+        other = next(o for o in tool.Blender.get_selected_objects() if o is not active)
+        # Host + host pairings are claimed by host-specific gizmos (wall-join,
+        # extend-vertical, …) — suppress here so the add-opening icon never
+        # stacks on top of them.
+        if is_supported_host(tool.Ifc.get_entity(other)):
             return False
-        a_element = tool.Ifc.get_entity(selected[0])
-        b_element = tool.Ifc.get_entity(selected[1])
-        return cls._is_apply_opening_pair(a_element, b_element) or cls._is_apply_opening_pair(b_element, a_element)
-
-    @staticmethod
-    def _is_apply_opening_pair(host_element, filling_element) -> bool:
-        """``host_element`` qualifies as a fillable host AND ``filling_element``
-        qualifies as a filling. Used twice with the operands swapped so the
-        gizmo polls true regardless of which of the two selected objects is
-        active."""
-        if not is_supported_host(host_element):
-            return False
-        if not hasattr(host_element, "HasOpenings"):
-            return False
-        return is_supported_filling_or_opening(filling_element)
+        return True
 
     def setup(self, context: bpy.types.Context) -> None:
         default_color, highlight_color = self.get_decoration_colors()
@@ -138,20 +114,18 @@ class GizmoHostAddOpening(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMixin
         )
 
     def position_gizmos(self, context: bpy.types.Context) -> None:
-        selected = list(tool.Blender.get_selected_objects())
-        if len(selected) != 2:
+        host_obj = context.active_object
+        if not host_obj:
             return
-        a, b = selected[0], selected[1]
-        a_element = tool.Ifc.get_entity(a)
-        b_element = tool.Ifc.get_entity(b)
-        if is_supported_host(a_element):
-            host_obj, host_element, other = a, a_element, b
-        elif is_supported_host(b_element):
-            host_obj, host_element, other = b, b_element, a
-        else:
+        selected = tool.Blender.get_selected_objects()
+        other = next((o for o in selected if o is not host_obj), None)
+        if not other:
+            return
+        element = tool.Ifc.get_entity(host_obj)
+        if not element:
             return
 
-        if tool.Parametric.is_path_connectable_wall(host_element):
+        if tool.Parametric.is_path_connectable_wall(element):
             world_pos = wall_anchor(context, self, host_obj, other)
         else:
             world_pos = layer3_anchor(host_obj, other)

src/bonsai/bonsai/bim/module/model/mep.py

@@ -38,7 +38,6 @@ import numpy as np
 from ifcopenshell.util.shape_builder import ShapeBuilder
 from mathutils import Matrix, Vector
 
-import bonsai.core.geometry
 import bonsai.core.root
 import bonsai.tool as tool
 from bonsai.bim.module.drawing import gizmos as gizmo
@@ -694,6 +693,27 @@ def get_connected_element_at_segment_port(segment, at_segment_start):
     return tool.System.get_port_relating_element(connected_port)
 
 
+def find_fitting_between_segments(segment_a, segment_b):
+    """Single IfcFlowFitting bridging segment_a and segment_b via ports, or
+    ``None`` if no fitting (or multiple fittings — only direct one-fitting
+    joins handled)."""
+    if not (segment_a.is_a("IfcFlowSegment") and segment_b.is_a("IfcFlowSegment")):
+        return None
+    b_ports_set = set(tool.System.get_ports(segment_b))
+    for a_port in tool.System.get_ports(segment_a):
+        connected_port = tool.System.get_connected_port(a_port)
+        if connected_port is None:
+            continue
+        fitting = tool.System.get_port_relating_element(connected_port)
+        if fitting is None or not fitting.is_a("IfcFlowFitting"):
+            continue
+        for fitting_port in tool.System.get_ports(fitting):
+            other_port = tool.System.get_connected_port(fitting_port)
+            if other_port is not None and other_port in b_ports_set:
+                return fitting
+    return None
+
+
 def _resolve_active_mep_segment(operator, context):
     """Return the operator's target ``IfcFlowSegment`` or ``None`` after reporting.
 
@@ -788,6 +808,52 @@ class MEPAddObstruction(bpy.types.Operator, tool.Ifc.Operator):
         return {"FINISHED"}
 
 
+class MEPUnjoinAtPort(bpy.types.Operator, tool.Ifc.Operator):
+    """Delete the IfcFlowFitting that bridges a segment's port to a second element.
+
+    Used when the connection at the port is in the JOINED state (the fitting
+    has at least one other port connecting to a different element). The
+    segment isn't resized — only the bridging fitting is removed. Refuses
+    to act on an OBSTRUCTION fitting (those are routed through
+    ``bim.mep_add_obstruction`` with mode=REMOVE which extends the segment
+    to absorb the freed length)."""
+
+    bl_idname = "bim.mep_unjoin_at_port"
+    bl_label = "Unjoin MEP Segment at Port"
+    bl_description = "Disconnect the segment from the fitting at the named port (deletes the fitting)"
+    bl_options = {"REGISTER", "UNDO"}
+    segment_id: bpy.props.IntProperty(name="Segment Element ID", default=0)
+    position: bpy.props.EnumProperty(
+        name="Port",
+        items=[
+            ("START", "At Start", "Operate on the segment's start port"),
+            ("END", "At End", "Operate on the segment's end port"),
+        ],
+        default="END",
+    )
+
+    def _execute(self, context):
+        resolved = _require_port_state(self, context, PORT_JOINED, "joining")
+        if resolved is None:
+            return {"CANCELLED"}
+        element, at_segment_start = resolved
+
+        fitting = get_connected_element_at_segment_port(element, at_segment_start)
+        if fitting is None or not fitting.is_a("IfcFlowFitting"):
+            self.report({"ERROR"}, "Connected port does not lead to a fitting.")
+            return {"CANCELLED"}
+        if getattr(fitting, "PredefinedType", None) == "OBSTRUCTION":
+            self.report({"ERROR"}, "Obstruction fittings are removed via bim.mep_add_obstruction (mode=REMOVE).")
+            return {"CANCELLED"}
+
+        fitting_obj = tool.Ifc.get_object(fitting)
+        if fitting_obj is None:
+            self.report({"ERROR"}, "Fitting has no Blender object.")
+            return {"CANCELLED"}
+        tool.Geometry.delete_ifc_object(fitting_obj)
+        return {"FINISHED"}
+
+
 class MEPRemoveTerminalFitting(bpy.types.Operator, tool.Ifc.Operator):
     """Remove the terminal fitting at a segment's named port.
 
@@ -840,6 +906,44 @@ class MEPRemoveTerminalFitting(bpy.types.Operator, tool.Ifc.Operator):
         return {"FINISHED"}
 
 
+class MEPUnjoinPair(bpy.types.Operator, tool.Ifc.Operator):
+    """Delete the IfcFlowFitting joining two selected MEP segments.
+
+    Removes the fitting; segments are left in place for the user to reposition."""
+
+    bl_idname = "bim.mep_unjoin_pair"
+    bl_label = "Unjoin MEP Segments"
+    bl_description = "Delete the fitting joining the two selected MEP segments"
+    bl_options = {"REGISTER", "UNDO"}
+
+    @classmethod
+    def poll(cls, context):
+        if not _n_mep_selected(2):
+            cls.poll_message_set("Select exactly 2 MEP segments joined by a fitting.")
+            return False
+        return True
+
+    def _execute(self, context):
+        selected_objs = tool.Blender.get_selected_objects()
+        elements = [tool.Ifc.get_entity(o) for o in selected_objs]
+        if any(e is None or not e.is_a("IfcFlowSegment") for e in elements):
+            self.report({"ERROR"}, "Both selected objects must be MEP segments.")
+            return {"CANCELLED"}
+        fitting = find_fitting_between_segments(elements[0], elements[1])
+        if fitting is None:
+            self.report({"ERROR"}, "No single fitting joins the selected segments.")
+            return {"CANCELLED"}
+        if getattr(fitting, "PredefinedType", None) == "OBSTRUCTION":
+            self.report({"ERROR"}, "Obstruction fittings are removed via bim.mep_add_obstruction (mode=REMOVE).")
+            return {"CANCELLED"}
+        fitting_obj = tool.Ifc.get_object(fitting)
+        if fitting_obj is None:
+            self.report({"ERROR"}, "Fitting has no Blender object.")
+            return {"CANCELLED"}
+        tool.Geometry.delete_ifc_object(fitting_obj)
+        return {"FINISHED"}
+
+
 class SelectMEPPathMembers(bpy.types.Operator):
     """Replace the selection with every MEP element reachable from the active
     one via IfcRelConnectsPorts — the entire connected distribution network."""
@@ -1678,11 +1782,6 @@ def _n_mep_selected(n: int) -> bool:
         element = tool.Ifc.get_entity(selected_obj)
         if element is None or not tool.System.is_mep_element(element):
             return False
-        # Array children mirror their parent's port topology. Writable MEP
-        # actions on a child get wiped by the next array regen, so gate the
-        # icons out at the visibility layer.
-        if tool.Array.is_array_child(element):
-            return False
     return True
 
 
@@ -2561,8 +2660,6 @@ def _active_is_flow_segment(obj: bpy.types.Object) -> bool:
     element = tool.Ifc.get_entity(obj)
     if element is None or not element.is_a("IfcFlowSegment"):
         return False
-    if tool.Array.is_array_child(element):
-        return False
     return tool.System.has_parametric_body(element)
 
 
@@ -2580,24 +2677,10 @@ def _active_mep_has_connected_neighbor(obj: bpy.types.Object) -> bool:
 
 
 def _active_is_bend_fitting(obj: bpy.types.Object) -> bool:
-    """True iff the active object is a parametric BEND fitting eligible for
-    the bend-preview re-edit path. Re-edit reads parameters from the type's
-    ``BBIM_Fitting`` pset, so that pset's presence is the ground truth for
-    re-editability — not the body representation class. The bend creation
-    path tessellates the swept-disk body as an upstream-geometry-kernel
-    workaround, so a freshly-committed bend's body contains only an
-    ``IfcTriangulatedFaceSet`` and ``has_parametric_body`` correctly
-    returns False for it; the pset gate is what keeps the pen icon
-    eligible."""
     element = tool.Ifc.get_entity(obj)
     if not _is_bend_fitting(element):
         return False
-    if tool.Array.is_array_child(element):
-        return False
-    element_type = ifcopenshell.util.element.get_type(element)
-    if element_type is None:
-        return False
-    return ifcopenshell.util.element.get_pset(element_type, "BBIM_Fitting") is not None
+    return tool.System.has_parametric_body(element)
 
 
 class GizmoMEPActions(bpy.types.GizmoGroup, gizmo.BaseIconActionGroup):
@@ -2680,20 +2763,20 @@ class GizmoMEPActions(bpy.types.GizmoGroup, gizmo.BaseIconActionGroup):
         ),
         IconActionConfig(
             name="unjoin_start",
-            icon="VIEW3D_GT_wall_link_toggle",
-            operator="bim.disconnect_elements",
+            icon="VIEW3D_GT_unjoin",
+            operator="bim.mep_unjoin_at_port",
             visibility_condition=lambda obj: _selection_size() == 1 and _active_is_flow_segment(obj),
         ),
         IconActionConfig(
             name="unjoin_end",
-            icon="VIEW3D_GT_wall_link_toggle",
-            operator="bim.disconnect_elements",
+            icon="VIEW3D_GT_unjoin",
+            operator="bim.mep_unjoin_at_port",
             visibility_condition=lambda obj: _selection_size() == 1 and _active_is_flow_segment(obj),
         ),
         IconActionConfig(
             name="unjoin_pair",
-            icon="VIEW3D_GT_wall_link_toggle",
-            operator="bim.disconnect_elements",
+            icon="VIEW3D_GT_unjoin",
+            operator="bim.mep_unjoin_pair",
             visibility_condition=lambda _active: _n_mep_selected(2),
         ),
     ]
@@ -2711,17 +2794,7 @@ class GizmoMEPActions(bpy.types.GizmoGroup, gizmo.BaseIconActionGroup):
         element = tool.Ifc.get_entity(obj)
         if element is None or not tool.System.is_mep_element(element):
             return False
-        if tool.System.has_parametric_body(element):
-            return True
-        # Bend fittings carry their parametric definition in the type's
-        # ``BBIM_Fitting`` pset because the bend creation path tessellates
-        # the swept-disk body (upstream geometry-kernel workaround), so
-        # ``has_parametric_body`` returns False for them. Fall back to the
-        # pset gate so the pen icon (re_edit_bend) stays reachable.
-        element_type = ifcopenshell.util.element.get_type(element)
-        if element_type is None:
-            return False
-        return ifcopenshell.util.element.get_pset(element_type, "BBIM_Fitting") is not None
+        return tool.System.has_parametric_body(element)
 
     def setup(self, context: bpy.types.Context) -> None:
         super().setup(context)
@@ -2729,13 +2802,11 @@ class GizmoMEPActions(bpy.types.GizmoGroup, gizmo.BaseIconActionGroup):
 
     @classmethod
     def _wire_anchored_icon_targets(cls, group) -> None:
-        """Pre-fill ``position`` (and ``mode`` for open-lock) on the lock
-        icons so a click dispatches to the right port without a per-frame
-        property write, and pre-bind the unified ``bim.disconnect_elements``
-        operator on each unjoin icon so :py:meth:`position_gizmos` only has
-        to update the two GUIDs per frame. Takes any object with
-        ``action_<name>_gizmo`` attributes so tests can exercise the wiring
-        without instantiating the GizmoGroup."""
+        """Pre-fill ``position`` (and ``mode`` for open-lock) on each anchored
+        icon so a click dispatches to the right port without a per-frame
+        property write; apply the warning-red hover colour to destructive
+        icons. Takes any object with ``action_<name>_gizmo`` attributes so
+        tests can exercise the wiring without instantiating the GizmoGroup."""
         for config_name, (_icon, position_arg) in cls.LOCK_ICON_CONFIGS.items():
             gz = getattr(group, f"action_{config_name}_gizmo", None)
             if gz is None:
@@ -2749,12 +2820,19 @@ class GizmoMEPActions(bpy.types.GizmoGroup, gizmo.BaseIconActionGroup):
                 op_props = gz.target_set_operator("bim.mep_remove_terminal_fitting")
                 op_props.position = position_arg
 
-        group.unjoin_op_props = {}
+        for config_name, position_arg in (("unjoin_start", "START"), ("unjoin_end", "END")):
+            gz = getattr(group, f"action_{config_name}_gizmo", None)
+            if gz is None:
+                continue
+            op_props = gz.target_set_operator("bim.mep_unjoin_at_port")
+            op_props.position = position_arg
+
+        warning_color = gizmo.get_warning_color_from_prefs(tool.Blender.get_addon_preferences())
         for config_name in cls.UNJOIN_CONFIGS:
             gz = getattr(group, f"action_{config_name}_gizmo", None)
             if gz is None:
                 continue
-            group.unjoin_op_props[config_name] = gz.target_set_operator("bim.disconnect_elements")
+            gz.color_highlight = warning_color
 
     def position_gizmos(self, context: bpy.types.Context) -> None:
         """Lay out icons across three regions: row above bbox top, segment
@@ -2821,10 +2899,6 @@ class GizmoMEPActions(bpy.types.GizmoGroup, gizmo.BaseIconActionGroup):
                 if not visible:
                     gz.hide = True
                     continue
-                if config.name.startswith("unjoin_"):
-                    if not self._bind_unjoin_at_port(config.name, obj, endpoint_kind == "START"):
-                        gz.hide = True
-                        continue
                 if segment_endpoints is None:
                     segment_endpoints = tool.Model.get_flow_segment_axis(obj)
                 start_world, end_world = segment_endpoints
@@ -2836,7 +2910,7 @@ class GizmoMEPActions(bpy.types.GizmoGroup, gizmo.BaseIconActionGroup):
                     if len(selected) == 2:
                         elements = [tool.Ifc.get_entity(o) for o in selected]
                         if all(e is not None and e.is_a("IfcFlowSegment") for e in elements):
-                            pair_fitting = tool.System.find_bridging_fitting(elements[0], elements[1]) or False
+                            pair_fitting = find_fitting_between_segments(elements[0], elements[1]) or False
                         else:
                             pair_fitting = False
                     else:
@@ -2848,13 +2922,6 @@ class GizmoMEPActions(bpy.types.GizmoGroup, gizmo.BaseIconActionGroup):
                     gz.hide = True
                     continue
 
-                if config.name == "unjoin_pair":
-                    selected = tool.Blender.get_selected_objects()
-                    pair_elements = [tool.Ifc.get_entity(o) for o in selected]
-                    if not self._bind_unjoin_pair(pair_elements):
-                        gz.hide = True
-                        continue
-
                 if not bend_anchor_attempted:
                     bend_anchor = compute_mep_join_location()
                     bend_anchor_attempted = True
@@ -2883,33 +2950,3 @@ class GizmoMEPActions(bpy.types.GizmoGroup, gizmo.BaseIconActionGroup):
         if name in self.ENDPOINT_CONFIGS:
             return self.ICON_SCALE * self.ENDPOINT_SCALE_RATIO
         return self.ICON_SCALE
-
-    def _bind_unjoin_at_port(self, config_name: str, segment_obj: bpy.types.Object, at_segment_start: bool) -> bool:
-        """Resolve the fitting at the named port and bind both GUIDs on the
-        pre-wired ``bim.disconnect_elements`` op_props. Returns False when
-        the partner is unresolvable (port not joined to a disconnectable
-        fitting), and the caller hides the icon."""
-        element = tool.Ifc.get_entity(segment_obj)
-        if element is None:
-            return False
-        fitting = get_connected_element_at_segment_port(element, at_segment_start)
-        if fitting is None or not fitting.is_a("IfcFlowFitting"):
-            return False
-        if getattr(fitting, "PredefinedType", None) == "OBSTRUCTION":
-            return False
-        op_props = self.unjoin_op_props[config_name]
-        op_props.element_a_guid = element.GlobalId
-        op_props.element_b_guid = fitting.GlobalId
-        return True
-
-    def _bind_unjoin_pair(self, pair_elements: list[ifcopenshell.entity_instance | None]) -> bool:
-        """Bind both segment GUIDs on the pair-disconnect icon's pre-wired
-        ``bim.disconnect_elements`` op_props. Returns False when either side
-        is missing a GlobalId (e.g. selection lost an active object), and
-        the caller hides the icon."""
-        if len(pair_elements) != 2 or any(e is None for e in pair_elements):
-            return False
-        op_props = self.unjoin_op_props["unjoin_pair"]
-        op_props.element_a_guid = pair_elements[0].GlobalId
-        op_props.element_b_guid = pair_elements[1].GlobalId
-        return True

src/bonsai/bonsai/bim/module/model/opening.py

@@ -240,15 +240,6 @@ def _store_batch_in_cache(cache_key: tuple[int, str], batch: "gpu.types.GPUBatch
     _batch_cache[cache_key] = (epoch, batch)
 
 
-def is_filling_supported(element) -> bool:
-    """True when Bonsai's opening generator can derive an opening from this
-    element. IFC's schema permits any IfcElement as a filling; Bonsai
-    currently supports only IfcDoor and IfcWindow because those are the
-    classes with OverallWidth/OverallHeight attributes (or their types'
-    ELEVATION_VIEW profiles) that the generator can consume."""
-    return element is not None and element.is_a() in ("IfcDoor", "IfcWindow")
-
-
 class FilledOpeningGenerator:
     def generate(
         self,
@@ -418,16 +409,18 @@ class FilledOpeningGenerator:
                 representation = tool.Geometry.get_representation_by_context(voided_element, context)
                 assert representation
 
-                tool.Geometry.recut_host(voided_obj, representation)
+                bonsai.core.geometry.switch_representation(
+                    tool.Ifc,
+                    tool.Geometry,
+                    obj=voided_obj,
+                    representation=representation,
+                )
 
     def regenerate_from_type(self, usecase_path: str, ifc_file: ifcopenshell.file, settings: dict[str, Any]) -> None:
         relating_type = settings["relating_type"]
 
-        # Filling type-switch on an array of fillings fans out N host recuts —
-        # one per related object — without batching. Coalesce them.
-        with tool.Geometry.batch_host_recut():
-            for related_object in settings["related_objects"]:
-                self._regenerate_from_type(related_object)
+        for related_object in settings["related_objects"]:
+            self._regenerate_from_type(related_object)
 
     def _regenerate_from_type(self, related_object: ifcopenshell.entity_instance) -> None:
         filling = related_object
@@ -476,7 +469,12 @@ class FilledOpeningGenerator:
             representation = tool.Geometry.get_active_representation(voided_obj)
             if not representation:
                 continue
-            tool.Geometry.recut_host(voided_obj, representation)
+            bonsai.core.geometry.switch_representation(
+                tool.Ifc,
+                tool.Geometry,
+                obj=voided_obj,
+                representation=representation,
+            )
 
     def generate_opening_from_filling(
         self,
@@ -611,31 +609,6 @@ class RecalculateFill(bpy.types.Operator, tool.Ifc.Operator):
         return context.selected_objects
 
     def _execute(self, context):
-        # N selected fillings × M voided host parts would fire N×M host recuts
-        # without batching. Coalesce per host.
-        with tool.Geometry.batch_host_recut():
-            return self._recalculate_fills(context)
-
-    def _recalculate_fills(self, context):
-        # Refresh each selected filling's mapped opening source before
-        # recutting the host. Dedup by source id covers the common shared-
-        # source case in one rewrite while leaving unrelated sibling sources
-        # untouched.
-        seen_source_ids: set[int] = set()
-        for obj in context.selected_objects:
-            element = tool.Ifc.get_entity(obj)
-            if not element or not element.FillsVoids:
-                continue
-            opening = element.FillsVoids[0].RelatingOpeningElement
-            body = tool.Geometry.get_body_representation(opening)
-            if body is None:
-                continue
-            source = tool.Geometry.resolve_mapped_representation(body)
-            if source.id() in seen_source_ids:
-                continue
-            seen_source_ids.add(source.id())
-            tool.Model.regenerate_filling_opening_body(element)
-
         for obj in context.selected_objects:
             element = tool.Ifc.get_entity(obj)
             if not element or not element.FillsVoids:
@@ -664,7 +637,12 @@ class RecalculateFill(bpy.types.Operator, tool.Ifc.Operator):
                 if building_obj and building_obj.data:
                     representation = tool.Geometry.get_active_representation(building_obj)
                     if representation:
-                        tool.Geometry.recut_host(building_obj, representation)
+                        bonsai.core.geometry.switch_representation(
+                            tool.Ifc,
+                            tool.Geometry,
+                            obj=building_obj,
+                            representation=representation,
+                        )
 
         # Refresh cut decorator
         DecoratorData.cut_cache.clear()
@@ -986,29 +964,27 @@ class EditOpenings(Operator, tool.Ifc.Operator):
         for opening_element in opening_elements:
             opening_obj = tool.Ifc.get_object(opening_element)
 
+            similar_openings = bonsai.core.geometry.get_similar_openings(tool.Ifc, opening_element)
+            similar_openings_building_objs = bonsai.core.geometry.get_similar_openings_building_objs(
+                tool.Ifc, similar_openings
+            )
+            building_objs.update(similar_openings_building_objs)
+
             if opening_obj:
-                opening_edited = tool.Ifc.is_edited(opening_obj)
-                opening_moved = tool.Ifc.is_moved(opening_obj)
-                # Sibling walls only need a viewport-level refresh when the
-                # opening's shape or placement actually changed — a pure
-                # show/hide toggle leaves them in their existing state.
-                if opening_edited or opening_moved:
-                    similar_openings = bonsai.core.geometry.get_similar_openings(tool.Ifc, opening_element)
-                    similar_openings_building_objs = bonsai.core.geometry.get_similar_openings_building_objs(
-                        tool.Ifc, similar_openings
-                    )
-                    building_objs.update(similar_openings_building_objs)
-                    if opening_edited:
-                        tool.Geometry.run_geometry_update_representation(obj=opening_obj)
-                    else:
-                        bonsai.core.geometry.edit_object_placement(
-                            tool.Ifc, tool.Geometry, tool.Surveyor, obj=opening_obj
-                        )
+                if tool.Ifc.is_edited(opening_obj):
+                    tool.Geometry.run_geometry_update_representation(obj=opening_obj)
+                    bonsai.core.geometry.edit_similar_opening_placement(
+                        tool.Geometry, opening_element, similar_openings
+                    )
+                elif tool.Ifc.is_moved(opening_obj):
+                    bonsai.core.geometry.edit_object_placement(tool.Ifc, tool.Geometry, tool.Surveyor, obj=opening_obj)
                     bonsai.core.geometry.edit_similar_opening_placement(
                         tool.Geometry, opening_element, similar_openings
                     )
-                    building_objs.update(self.get_all_building_objects_of_similar_openings(opening_element))
 
+                building_objs.update(
+                    self.get_all_building_objects_of_similar_openings(opening_element)
+                )  # NB this has nothing to do with clone similar_opening
                 tool.Ifc.unlink(element=opening_element)
                 if props.representation_obj == opening_obj:
                     props.representation_obj = None
@@ -1046,12 +1022,6 @@ class CloneOpening(Operator, tool.Ifc.Operator):
         return True
 
     def _execute(self, context):
-        # The voided host may be an aggregate whose parts each get recut.
-        # Coalesce per host so a many-parts aggregate doesn't fan out.
-        with tool.Geometry.batch_host_recut():
-            return self._clone_opening(context)
-
-    def _clone_opening(self, context):
         # NOTE: Operator displayed in UI only with IfcOpeningElement being active.
         ifc_file = tool.Ifc.get()
         objects = bpy.context.selected_objects
@@ -1081,7 +1051,12 @@ class CloneOpening(Operator, tool.Ifc.Operator):
                 continue
             representation = tool.Geometry.get_active_representation(obj)
             assert representation
-            tool.Geometry.recut_host(obj, representation)
+            bonsai.core.geometry.switch_representation(
+                tool.Ifc,
+                tool.Geometry,
+                obj=obj,
+                representation=representation,
+            )
 
         return {"FINISHED"}
 

src/bonsai/bonsai/bim/module/model/profile.py

@@ -1002,14 +1002,6 @@ class EnableEditingExtrusionAxis(bpy.types.Operator, tool.Ifc.Operator):
     def _execute(self, context):
         self.unit_scale = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
         obj = context.active_object
-
-        # Commit any in-progress parametric (gizmo) draft on this object
-        # before switching to axis-edit. Otherwise the in-memory draft
-        # state is overwritten when the axis mesh is imported below,
-        # silently discarding the user's pending dimension edits.
-        if feature := tool.Parametric.is_object_editing(obj):
-            tool.Parametric.commit_object_draft(obj, feature.finish_op)
-
         element = tool.Ifc.get_entity(obj)
 
         axis = ifcopenshell.util.representation.get_representation(element, "Model", "Axis", "GRAPH_VIEW")

src/bonsai/bonsai/bim/module/model/prop.py

@@ -33,10 +33,8 @@ from bonsai.bim.module.drawing.decoration import CutDecorator
 from bonsai.bim.module.model.data import AuthoringData
 from bonsai.bim.module.model.decorator import (
     BoundingBoxDecorator,
-    MEPSystemPathDecorator,
     SlabDirectionDecorator,
     WallAxisDecorator,
-    WallSystemPathDecorator,
 )
 from bonsai.bim.module.model.door import update_door_modifier_bmesh
 from bonsai.bim.module.model.window import update_window_modifier_bmesh
@@ -134,19 +132,6 @@ def update_slab_direction_decorator(self: "BIMModelProperties", context: bpy.typ
         SlabDirectionDecorator.uninstall()
 
 
-def update_paths_decorator(self: "BIMModelProperties", context: bpy.types.Context) -> None:
-    """Unified toggle for connected-element path overlays. Drives both the
-    MEP and wall path decorators — each decorator's ``draw`` short-circuits
-    when its kind of element isn't selected, so leaving both installed is
-    cheap and lets one toggle cover any connected-element family."""
-    if self.show_paths:
-        MEPSystemPathDecorator.install(bpy.context)
-        WallSystemPathDecorator.install(bpy.context)
-    else:
-        MEPSystemPathDecorator.uninstall()
-        WallSystemPathDecorator.uninstall()
-
-
 def update_measure_xyz(self: "BIMModelProperties", context: bpy.types.Context) -> None:
     if self.show_bounding_box:
         BoundingBoxDecorator.install(context)
@@ -243,7 +228,11 @@ def update_wall_offset_baseline(self: "BIMWallProperties", context: bpy.types.Co
 def update_railing(self: "BIMRailingProperties", context: bpy.types.Context) -> None:
     """Regenerate railing mesh when property changes."""
     if self.is_editing:
-        _get_updater("railing", "update_railing_modifier_bmesh")(context)
+        # Only FRAMELESS_PANEL can update live via bmesh.
+        # WALL_MOUNTED_HANDRAIL geometry is generated from IFC representation,
+        # so it only updates on "Finish Editing" to avoid modifying IFC during preview.
+        if self.railing_type == "FRAMELESS_PANEL":
+            _get_updater("railing", "update_railing_modifier_bmesh")(context)
 
 
 def update_roof(self: "BIMRoofProperties", context: bpy.types.Context) -> None:
@@ -369,19 +358,6 @@ class BIMModelProperties(PropertyGroup):
         default=False,
         update=update_slab_direction_decorator,
     )
-    show_paths: bpy.props.BoolProperty(
-        name="Show Paths",
-        default=False,
-        update=update_paths_decorator,
-        description=(
-            "Trace the connected element path from the selected element. For "
-            "walls, follows IfcRelConnectsPathElements and draws each "
-            "connected wall's reference axis with endpoint dots. For MEP "
-            "elements, follows IfcRelConnectsPorts and draws each segment's "
-            "axis plus a port-to-port spider for each fitting. Toggle off to "
-            "skip the BFS traversal entirely."
-        ),
-    )
 
     prev_transform_orientation_slot_type: bpy.props.StringProperty(name="Previous Gizmo Orientation Type")
     prev_show_gizmo_object_translate: bpy.props.BoolProperty(name="Previous Gizmo Translate")
@@ -429,7 +405,6 @@ class BIMModelProperties(PropertyGroup):
         offset: float
         show_wall_axis: bool
         show_slab_direction: bool
-        show_paths: bool
 
         prev_transform_orientation_slot_type: str
         prev_show_gizmo_object_translate: bool
@@ -1718,21 +1693,6 @@ class BIMRoofProperties(PropertyGroup):
             setattr(target_props, prop_name, prop_value)
 
 
-class BIMSlabProperties(PropertyGroup):
-    """Transient state for the slab disconnect-access gizmo.
-
-    ``is_editing`` flips True when the user clicks the pen icon on a slab
-    that has wall connections — gating the per-wall disconnect icons in
-    ``GizmoSlabUnjoinWalls`` so they're hidden until the user opts in. No
-    IFC draft state lives here: the disconnect operator commits directly,
-    so this PropertyGroup carries only the UI gate."""
-
-    is_editing: bpy.props.BoolProperty(name="Slab Edit Active", default=False, options={"SKIP_SAVE"})
-
-    if TYPE_CHECKING:
-        is_editing: bool
-
-
 class BIMWallProperties(PropertyGroup):
     """Transient draft state for parametric wall gizmo editing.
 

src/bonsai/bonsai/bim/module/model/railing.py

@@ -18,7 +18,6 @@
 
 
 import json
-import math
 from typing import Any
 
 import bmesh
@@ -28,24 +27,14 @@ import ifcopenshell.api.geometry
 import ifcopenshell.api.pset
 import ifcopenshell.util.representation
 import ifcopenshell.util.unit
-from mathutils import Matrix, Vector
+from mathutils import Vector
 
 import bonsai.core.geometry
 import bonsai.core.root
 import bonsai.tool as tool
-from bonsai.bim.module.drawing import gizmos as gizmo
-from bonsai.bim.module.drawing.gizmos import DimensionGizmoConfig
-from bonsai.bim.module.model import prop
 from bonsai.bim.module.model.data import RailingData, refresh
 from bonsai.bim.module.model.decorator import ProfileDecorator
-from bonsai.bim.parametric_lifecycle import (
-    CycleTypeMixin,
-    PathPreservingEditMixin,
-    PickTypeMixin,
-)
-from bonsai.tool.cad import WELD_TOLERANCE
-
-V_ = tool.Blender.V_
+from bonsai.bim.parametric_lifecycle import PathPreservingEditMixin
 
 # reference:
 # https://ifc43-docs.standards.buildingsmart.org/IFC/RELEASE/IFC4x3/HTML/lexical/IfcRailing.htm
@@ -136,56 +125,6 @@ def update_bbim_railing_pset(element: ifcopenshell.entity_instance, railing_data
     ifcopenshell.api.pset.edit_pset(tool.Ifc.get(), pset=pset, properties={"Data": railing_data})
 
 
-def generate_wall_mounted_handrail_preview(
-    obj: bpy.types.Object,
-    props: "prop.BIMRailingProperties",
-    path_data: dict[str, Any],
-    si_conversion: float,
-) -> None:
-    """Viewport-only WALL_MOUNTED_HANDRAIL preview: rebuild ``obj.data`` from the same
-    geometry helper the IFC representation builder uses, without writing any IFC."""
-    railing_path = [Vector(v) * si_conversion for v in path_data["verts"]]
-    looped_path = path_data["edges"][-1][-1] == path_data["edges"][0][0]
-
-    geom = ifcopenshell.api.geometry.compute_wall_mounted_handrail_geometry(
-        railing_path=railing_path,
-        support_spacing=props.support_spacing,
-        railing_diameter=props.railing_diameter,
-        clear_width=props.clear_width,
-        height=props.height,
-        use_manual_supports=props.use_manual_supports,
-        terminal_type=props.terminal_type,
-        looped_path=looped_path,
-        unit_scale=1.0,  # props are already SI; bypass the IFC project-units conversion
-    )
-
-    bm = tool.Blender.get_bmesh_for_mesh(obj.data, clean=True)
-
-    tool.Cad.sweep_disk_along_polyline(
-        bm,
-        [Vector(p) for p in geom.handrail_polyline],
-        geom.handrail_radius,
-        arc_indices=geom.handrail_arc_point_indices,
-    )
-
-    for support in geom.supports:
-        tool.Cad.sweep_disk_along_polyline(
-            bm,
-            [Vector(p) for p in support.arc_polyline],
-            support.arc_radius,
-        )
-        tool.Cad.add_disk_extrusion(
-            bm,
-            Vector(support.disk_position),
-            support.disk_radius,
-            support.disk_depth,
-            support.disk_z_rotation,
-        )
-
-    bmesh.ops.recalc_face_normals(bm, faces=bm.faces[:])
-    tool.Blender.apply_bmesh(obj.data, bm)
-
-
 def update_railing_modifier_bmesh(context: bpy.types.Context) -> None:
     """before using should make sure that Data contains up-to-date information.
     If BBIM Pset just changed should call refresh() before updating bmesh
@@ -201,13 +140,6 @@ def update_railing_modifier_bmesh(context: bpy.types.Context) -> None:
     path_data = RailingData.data["path_data"]
 
     si_conversion = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
-
-    # WALL_MOUNTED_HANDRAIL renders the preview from the compute helper; IFC stays
-    # untouched until Finish Editing rebuilds the representation.
-    if not props.is_editing_path and props.railing_type == "WALL_MOUNTED_HANDRAIL":
-        generate_wall_mounted_handrail_preview(obj, props, path_data, si_conversion)
-        return
-
     # need to make sure we support edit mode
     # since users will probably be in edit mode when they'll be changing railing path
     bm = tool.Blender.get_bmesh_for_mesh(obj.data, clean=True)
@@ -233,6 +165,8 @@ def update_railing_modifier_bmesh(context: bpy.types.Context) -> None:
         thickness = props.thickness
         spacing = props.spacing
 
+        # spacing
+        # split each edge in 3 segments by 0.5 * spacing by x-y plane
         main_edges = bm.edges[:]
         for main_edge in main_edges:
             bm_split_edge_at_offset(main_edge, spacing)
@@ -277,7 +211,7 @@ def update_railing_modifier_bmesh(context: bpy.types.Context) -> None:
         bmesh.ops.dissolve_edges(bm, edges=edges_to_dissolve)
         bmesh.ops.dissolve_verts(bm, verts=verts_to_dissolve)
         # to remove unnecessary verts in 0 spacing case
-        bmesh.ops.remove_doubles(bm, verts=bm.verts, dist=WELD_TOLERANCE)
+        bmesh.ops.remove_doubles(bm, verts=bm.verts, dist=0.0001)
 
         bmesh.ops.recalc_face_normals(bm, faces=bm.faces[:])
 
@@ -337,8 +271,8 @@ def get_path_data(obj: bpy.types.Object) -> dict[str, Any]:
             segments.append((i - 1, 0))
             break
 
-        # Vertical-only segments project to a degenerate XY edge; skip to avoid divide-by-zero downstream.
-        if (v.co.xy - prev_v.co.xy).length <= WELD_TOLERANCE:
+        # skip path verts if they just go vertical to avoid errors
+        if (v.co.xy - prev_v.co.xy).length <= 0.0001:
             continue
 
         points.append(v.co)
@@ -473,8 +407,9 @@ class CopyRailingParameters(bpy.types.Operator, tool.Ifc.Operator):
 
 
 class _RailingEditMixin(PathPreservingEditMixin):
-    """Single-object (active_object) railing-edit hooks; path_data is preserved
-    through the edit (path editing is a separate operator family)."""
+    """Type-specific hooks for railing parametric-edit operators. Single-object
+    (active_object). ``path_data`` is preserved through the edit; the separate
+    ``Enable/Finish/CancelEditingRailingPath`` operators handle path editing."""
 
     pset_name = "BBIM_Railing"
 
@@ -501,21 +436,7 @@ class _RailingEditMixin(PathPreservingEditMixin):
         update_railing_modifier_ifc_data(context)
 
     @classmethod
-    def _restore_viewport_after_cancel(cls, obj: bpy.types.Object, context: bpy.types.Context) -> None:
-        """WALL_MOUNTED_HANDRAIL reloads the committed Body; others rebuild the preview bmesh."""
-        props = tool.Model.get_railing_props(obj)
-        if props.railing_type == "WALL_MOUNTED_HANDRAIL":
-            element = tool.Ifc.get_entity(obj)
-            assert element
-            body = ifcopenshell.util.representation.get_representation(element, "Model", "Body", "MODEL_VIEW")
-            if body:
-                bonsai.core.geometry.switch_representation(
-                    tool.Ifc,
-                    tool.Geometry,
-                    obj=obj,
-                    representation=body,
-                )
-            return
+    def _update_modifier_bmesh(cls, obj: bpy.types.Object, context: bpy.types.Context) -> None:
         update_railing_modifier_bmesh(context)
 
 
@@ -546,556 +467,6 @@ class FinishEditingRailing(_RailingEditMixin, bpy.types.Operator, tool.Ifc.Opera
         return self._finish_targets(context)
 
 
-class CycleRailingType(bpy.types.Operator, tool.Ifc.Operator, CycleTypeMixin):
-    """Cycle railing_type (FRAMELESS_PANEL ↔ WALL_MOUNTED_HANDRAIL). Shift+click reverses."""
-
-    bl_idname = "bim.cycle_railing_type"
-    bl_label = "Cycle Railing Type"
-    bl_options = {"REGISTER", "UNDO"}
-
-    element_checker = tool.Parametric.is_railing
-    props_getter = tool.Model.get_railing_props
-    type_literal = tool.Model.RailingType
-    type_attr = "railing_type"
-
-    def _execute(self, context: bpy.types.Context) -> set[str]:
-        return self._cycle_type(context)
-
-
-class ToggleRailingUseManualSupports(bpy.types.Operator):
-    """Flip use_manual_supports on the active WALL_MOUNTED_HANDRAIL railing.
-
-    No-op unless a parametric edit is active and the railing is wall-mounted.
-    """
-
-    bl_idname = "bim.toggle_railing_use_manual_supports"
-    bl_label = "Toggle Railing Manual Supports"
-    bl_description = "Switch between automatic support spacing and manual per-vertex placement"
-    bl_options = {"REGISTER", "UNDO"}
-
-    def execute(self, context):
-        resolved = tool.Model.resolve_active_props_for_edit(
-            context,
-            tool.Model.get_railing_props,
-            subtype=("railing_type", "WALL_MOUNTED_HANDRAIL"),
-        )
-        if resolved is None:
-            return {"CANCELLED"}
-        _obj, props = resolved
-        props.use_manual_supports = not props.use_manual_supports
-        return {"FINISHED"}
-
-
-class PickRailingTerminalType(bpy.types.Operator, tool.Ifc.Operator, PickTypeMixin):
-    """Pick ``terminal_type`` for the active WALL_MOUNTED_HANDRAIL railing."""
-
-    bl_idname = "bim.pick_railing_terminal_type"
-    bl_label = "Pick Railing Terminal Type"
-    bl_description = "Pick the cap geometry applied at the rail ends"
-    bl_options = {"REGISTER", "UNDO"}
-
-    skip_element_check = True
-    props_getter = tool.Model.get_railing_props
-    type_literal = prop.CapType
-    type_attr = "terminal_type"
-
-    def _execute(self, context: bpy.types.Context) -> set[str]:
-        if (
-            tool.Model.resolve_active_props_for_edit(
-                context,
-                tool.Model.get_railing_props,
-                subtype=("railing_type", "WALL_MOUNTED_HANDRAIL"),
-            )
-            is None
-        ):
-            return {"CANCELLED"}
-        return self._pick_type(context)
-
-
-def _format_attr_distance(attr_name: str):
-    """text_formatter that renders the named property as a distance, ignoring the
-    dimension's visible-length argument (which is fixed for schematic gizmos)."""
-    return lambda p, _v: tool.Unit.format_distance(getattr(p, attr_name))
-
-
-class GizmoRailingSchematic(bpy.types.GizmoGroup, gizmo.BaseSchematicGizmoGroup):
-    """Schematic-frame parametric editor for railings. Mutually exclusive with path-edit mode."""
-
-    bl_idname = "OBJECT_GGT_bim_railing_edition"
-    bl_label = "Railing Editing Gizmo"
-    bl_space_type = "VIEW_3D"
-    bl_region_type = "WINDOW"
-    bl_options = {"3D", "PERSISTENT"}
-
-    enable_editing_operator = "bim.enable_editing_railing"
-    finish_editing_operator = "bim.finish_editing_railing"
-    cancel_editing_operator = "bim.cancel_editing_railing"
-    cycle_type_operator = "bim.cycle_railing_type"
-
-    props_getter = tool.Model.get_railing_props
-    gizmo_pref_name = "railing"
-
-    # Schematic-local layout. +X → screen RIGHT, +Y → screen UP, +Z → toward viewer
-    # (post billboard rotation). Each dimension is anchored alongside the feature it
-    # measures so the label, not the bar length, carries the value.
-    SCHEMATIC_MESH_HEIGHT_FRAC = 0.9  # Mesh top edge in schematic-local +Y
-    SCHEMATIC_MESH_WIDTH_FRAC = 0.7  # Mesh side edges in schematic-local ±X
-    SCHEMATIC_MESH_RAIL_Y_FRAC = SCHEMATIC_MESH_HEIGHT_FRAC / 2  # WALL_MOUNTED_HANDRAIL rail centreline
-    SCHEMATIC_MESH_DEPTH_FRAC = 0.06  # Panel depth — small so the schematic reads as slabs not boxes
-    # WALL_MOUNTED_HANDRAIL dimensions — fractions of schematic_box_size so they
-    # scale with the host group's box size.
-    SCHEMATIC_RAIL_RADIUS_FRAC = 0.05
-    SCHEMATIC_RAIL_CLEAR_FRAC = 0.5  # Stylised — wider than real-world for visible bracket arm
-    SCHEMATIC_RAIL_INSET_FRAC = 0.08  # Wall extends past the outermost support on both sides
-
-    @classmethod
-    def schematic_rail_radius(cls) -> float:
-        return cls.schematic_box_size * cls.SCHEMATIC_RAIL_RADIUS_FRAC
-
-    @classmethod
-    def schematic_rail_clear(cls) -> float:
-        return cls.schematic_box_size * cls.SCHEMATIC_RAIL_CLEAR_FRAC
-
-    # Axonometric 3/4 view: +Z projects down-and-left so the depth axis
-    # is visibly separated from the back face. Without the X tilt, panel
-    # thickness (schematic-local Z) collapses to a near-horizontal bar.
-    schematic_view_rotation = Matrix.Rotation(math.radians(20), 4, "X") @ Matrix.Rotation(math.radians(-25), 4, "Y")
-
-    # Hover a dimension → highlight the schematic edges tagged with the matching feature.
-    # Tags are written by the mesh builders. "spacing" is empty space (no edges) so it's
-    # absent from this map and gracefully no-ops on hover.
-    schematic_attr_to_feature = {
-        "height": "panel_height",
-        "thickness": "panel_thickness",
-        "railing_diameter": "rail_tube",
-        "clear_width": "bracket",
-        "support_spacing": "bracket",
-    }
-
-    schematic_dimension_props = [
-        # ── FRAMELESS_PANEL ─────────────────────────────────────────────
-        DimensionGizmoConfig(
-            attr_name="height",
-            axis=(0, 1, 0),
-            min_value=0.01,
-            # Gated to FRAMELESS_PANEL: in WALL_MOUNTED_HANDRAIL, height only
-            # feeds TO_FLOOR / TO_END_POST_AND_FLOOR terminals so dragging it
-            # is a no-op under the default "180" terminal.
-            visibility_condition=lambda p: p.railing_type == "FRAMELESS_PANEL",
-            matrix_position=lambda p: Vector((-GizmoRailingSchematic.SCHEMATIC_MESH_WIDTH_FRAC / 2 - 0.08, 0.0, 0.0)),
-            schematic_visible_length=SCHEMATIC_MESH_HEIGHT_FRAC,
-            text_formatter=_format_attr_distance("height"),
-        ),
-        DimensionGizmoConfig(
-            attr_name="thickness",
-            axis=(0, 0, 1),  # panel depth — projects to a true depth direction under the 3/4 tilt
-            min_value=0.005,
-            visibility_condition=lambda p: p.railing_type == "FRAMELESS_PANEL",
-            matrix_position=lambda p: Vector(
-                (
-                    (
-                        -GizmoRailingSchematic.SCHEMATIC_MESH_WIDTH_FRAC / 2
-                        - GizmoRailingSchematic.SCHEMATIC_MESH_GAP_HALF_WIDTH
-                    )
-                    / 2,
-                    GizmoRailingSchematic.SCHEMATIC_MESH_HEIGHT_FRAC + 0.05,
-                    -GizmoRailingSchematic.SCHEMATIC_MESH_DEPTH_FRAC / 2,
-                )
-            ),
-            schematic_visible_length=0.4,  # longer than default to survive depth foreshortening
-            text_formatter=_format_attr_distance("thickness"),
-        ),
-        DimensionGizmoConfig(
-            attr_name="spacing",
-            axis=(1, 0, 0),
-            min_value=0.0,  # zero-spacing collapses the picket gap into a single continuous panel
-            visibility_condition=lambda p: p.railing_type == "FRAMELESS_PANEL",
-            matrix_position=lambda p: Vector((0.0, -0.1, 0.0)),
-            text_formatter=_format_attr_distance("spacing"),
-        ),
-        # ── WALL_MOUNTED_HANDRAIL ──────────────────────────────────────
-        DimensionGizmoConfig(
-            attr_name="railing_diameter",
-            axis=(0, 1, 0),
-            min_value=0.001,
-            visibility_condition=lambda p: p.railing_type == "WALL_MOUNTED_HANDRAIL",
-            matrix_position=lambda p: Vector(
-                (
-                    -GizmoRailingSchematic.SCHEMATIC_MESH_WIDTH_FRAC / 2 - 0.05,
-                    GizmoRailingSchematic.SCHEMATIC_MESH_RAIL_Y_FRAC - 0.09,
-                    GizmoRailingSchematic.schematic_rail_clear(),
-                )
-            ),
-            text_formatter=_format_attr_distance("railing_diameter"),
-        ),
-        DimensionGizmoConfig(
-            attr_name="clear_width",
-            axis=(0, 0, 1),  # +Z is the wall-to-rail perpendicular axis under the 3/4 tilt
-            min_value=0.001,
-            visibility_condition=lambda p: p.railing_type == "WALL_MOUNTED_HANDRAIL",
-            matrix_position=lambda p: Vector(
-                (
-                    0.0,
-                    GizmoRailingSchematic.SCHEMATIC_MESH_RAIL_Y_FRAC,
-                    0.0,
-                )
-            ),
-            schematic_visible_length=0.36,  # 2× default so the call-out survives depth projection
-            text_formatter=_format_attr_distance("clear_width"),
-        ),
-        DimensionGizmoConfig(
-            attr_name="support_spacing",
-            axis=(1, 0, 0),
-            min_value=0.05,
-            visibility_condition=lambda p: (p.railing_type == "WALL_MOUNTED_HANDRAIL" and not p.use_manual_supports),
-            matrix_position=lambda p: Vector(
-                (
-                    -GizmoRailingSchematic.SCHEMATIC_MESH_WIDTH_FRAC / 2
-                    + GizmoRailingSchematic.SCHEMATIC_RAIL_INSET_FRAC,
-                    -0.18,
-                    0.0,
-                )
-            ),
-            # Bare names (not Gizmo…SCHEMATIC_…) because the class is still under construction here.
-            schematic_visible_length=SCHEMATIC_MESH_WIDTH_FRAC - 2 * SCHEMATIC_RAIL_INSET_FRAC,
-            text_formatter=_format_attr_distance("support_spacing"),
-        ),
-    ]
-
-    @classmethod
-    def is_element_type(cls, element: ifcopenshell.entity_instance) -> bool:
-        return tool.Parametric.is_railing(element)
-
-    @classmethod
-    def schematic_cache_key(cls, props) -> tuple:
-        """Cache the schematic mesh by ``railing_type`` — proportions are fixed
-        per type, so the bmesh build runs at most twice across a session
-        (once for ``FRAMELESS_PANEL``, once for ``WALL_MOUNTED_HANDRAIL``)
-        rather than once per draw call."""
-        return (props.railing_type,)
-
-    def setup_element_specific_gizmos(self, context: bpy.types.Context) -> None:
-        """Create the WALL_MOUNTED_HANDRAIL-only affordances on the schematic.
-
-        Two static lock glyphs (open/closed) for toggling
-        ``use_manual_supports``: instantiate both and let the per-frame state
-        query pick which one to show. State-aware icons use a static pair
-        rather than a single dynamic gizmo to avoid ``prop_path`` resolution
-        in the render path.
-
-        Plus a cycle-glyph at the rail end that opens the ``terminal_type``
-        popup when clicked.
-        """
-        default_color, highlight_color = self.get_decoration_colors()
-
-        self.lock_open_gizmo, self.lock_closed_gizmo = self.create_icon_gizmo_lock_pair(
-            "bim.toggle_railing_use_manual_supports",
-            open_color=default_color,
-        )
-
-        self.terminal_gizmo = self.gizmos.new("VIEW3D_GT_menu")
-        self.terminal_gizmo.color = default_color
-        self.terminal_gizmo.color_highlight = highlight_color
-        self.terminal_gizmo.use_draw_scale = False
-        self.terminal_gizmo.alpha = 0.8
-        self.terminal_gizmo.target_set_operator("bim.pick_railing_terminal_type")
-
-    def _refresh_element_specific(self, context: bpy.types.Context, mw: "Matrix", props) -> None:
-        """Position and gate the WALL_MOUNTED_HANDRAIL-only gizmos.
-
-        - Lock glyphs: only WALL_MOUNTED_HANDRAIL while editing. Show
-          ``lock_open`` when ``use_manual_supports`` is True, the closed
-          padlock when False ("auto-spacing is locked to support_spacing").
-        - Terminal gizmo: same gating, positioned just past the right rail
-          end so it reads as "configure the rail's end cap".
-        """
-        super()._refresh_element_specific(context, mw, props)
-
-        # ``draw_prepare`` can fire on a freshly recreated GizmoGroup instance
-        # before ``setup_element_specific_gizmos`` has populated the lock /
-        # terminal attributes (Blender 5.x recreates per-region groups on
-        # reload). Bail out cheaply; the next refresh after setup completes
-        # will reposition them correctly.
-        if not hasattr(self, "lock_open_gizmo"):
-            return
-
-        # Single gate for all WALL_MOUNTED_HANDRAIL extras.
-        active = props.is_editing and not props.is_editing_path and props.railing_type == "WALL_MOUNTED_HANDRAIL"
-
-        if not active:
-            self.lock_open_gizmo.hide = True
-            self.lock_closed_gizmo.hide = True
-            self.terminal_gizmo.hide = True
-            return
-
-        billboard_rot = self._frame_billboard_rot
-        view_rotation = self.schematic_view_rotation
-        anchor = self._compute_schematic_anchor(props, mw, billboard_rot)
-
-        # ── Lock glyphs for use_manual_supports ──────────────────────────
-        # Sit just above the wall's bottom line, near the centre of the
-        # schematic — visually grouped with the dimension it controls
-        # (support_spacing) without overlapping the arrow tail below.
-        is_manual = bool(props.use_manual_supports)
-        self.lock_open_gizmo.hide = not is_manual
-        self.lock_closed_gizmo.hide = is_manual
-        lock_local = Vector((0.0, 0.05, 0.0))
-        lock_world = anchor + billboard_rot @ view_rotation @ lock_local
-        lock_matrix = gizmo.billboarded_at(lock_world, billboard_rot, 0.09)
-        self.lock_open_gizmo.matrix_basis = lock_matrix
-        self.lock_closed_gizmo.matrix_basis = lock_matrix
-
-        # ── Terminal-type popup gizmo at the right rail end ──────────────
-        # Pushed well past the right wall edge so the icon doesn't crowd
-        # the wall outline or the bracket attach point. At rail height and
-        # rail depth so it reads as "attached to the rail terminal".
-        self.terminal_gizmo.hide = False
-        terminal_local = Vector(
-            (
-                self.SCHEMATIC_MESH_WIDTH_FRAC / 2 + 0.25,
-                self.SCHEMATIC_MESH_RAIL_Y_FRAC,
-                self.schematic_rail_clear(),
-            )
-        )
-        terminal_world = anchor + billboard_rot @ view_rotation @ terminal_local
-        self.terminal_gizmo.matrix_basis = gizmo.billboarded_at(terminal_world, billboard_rot, 0.18)
-
-    def update_editing_gizmos(
-        self, context: bpy.types.Context, mw: "Matrix", props: "prop.BIMRailingProperties"
-    ) -> None:
-        """Hide the pen gizmo while polyline path-edit is active; reposition the cycle icon.
-
-        The base class shows the pen gizmo whenever ``is_editing`` is False,
-        which is the case during path-edit too. Allowing the user to click
-        through into parametric edit while the polyline mesh is open in EDIT
-        mode mixes two distinct editing states and leaves a stale draft if
-        they cancel out — block the entry point instead. The operator itself
-        is intentionally not guarded (callers via scripting can still invoke
-        it); this is the UX-level enforcement.
-
-        The cycle icon defaults to the editing icon row (next to validate /
-        cancel) via the parent's positioning. We move it to just above the
-        schematic mesh so it reads as "cycle the railing type *shown here*"
-        — associated with the preview the user is interacting with, not a
-        generic editing button at the bottom of the schematic.
-        """
-        super().update_editing_gizmos(context, mw, props)
-        if props.is_editing_path:
-            self.pen_gizmo.hide = True
-
-        if props.is_editing and not props.is_editing_path:
-            billboard_rot = self._frame_billboard_rot
-            view_rotation = self.schematic_view_rotation
-            anchor = self._compute_schematic_anchor(props, mw, billboard_rot)
-            # Comfortably above the mesh top edge so the icon doesn't crowd
-            # the ``thickness`` / ``clear_width`` dimension callouts that
-            # already sit just above the panel/wall.
-            cycle_local = Vector((0.0, self.SCHEMATIC_MESH_HEIGHT_FRAC + 0.25, 0.0))
-            world_pos = anchor + billboard_rot @ view_rotation @ cycle_local
-            # 30% smaller than the editing-icon-row default (0.30 → 0.21):
-            # the cycle is a tertiary affordance compared to pen/validate/cancel.
-            self.cycle_gizmo.matrix_basis = gizmo.billboarded_at(world_pos, billboard_rot, 0.21)
-
-    @classmethod
-    def build_schematic_mesh(cls, props) -> "bmesh.types.BMesh":
-        """Build a wireframe preview of the railing in schematic-local coordinates.
-
-        FRAMELESS_PANEL renders as a box whose proportions track the bound
-        properties (height / thickness / spacing); WALL_MOUNTED_HANDRAIL
-        renders as a horizontal tube with two L-shaped supports whose
-        proportions track railing_diameter / clear_width / support_spacing.
-        Both are scaled to fit inside ``[-schematic_box_size, +schematic_box_size]``
-        on each axis so the schematic reads the same regardless of absolute
-        property values.
-
-        The mesh is decorative — clicks land on the labeled sliders, not on
-        the preview geometry. See ``BaseSchematicGizmoGroup`` for the
-        draw-handler lifecycle.
-        """
-        bm = bmesh.new()
-        if props.railing_type == "FRAMELESS_PANEL":
-            cls._build_frameless_panel_schematic(bm, props)
-        else:
-            cls._build_wall_mounted_handrail_schematic(bm, props)
-        return bm
-
-    # Schematic-local half-width of the visible gap between the two panel boxes.
-    # Conveys the "spacing" semantic at a glance — the user sees two pickets
-    # separated by air, with the spacing dimension emerging from that gap.
-    SCHEMATIC_MESH_GAP_HALF_WIDTH = 0.05
-
-    @classmethod
-    def _build_frameless_panel_schematic(cls, bm: "bmesh.types.BMesh", props) -> None:
-        """Stylised panel: two wireframe boxes with a visible gap between them.
-
-        The box edges sit at the ``SCHEMATIC_MESH_*_FRAC`` positions
-        (matching where the dimension gizmos anchor), so each dimension line
-        visually starts at the geometry feature it measures. Internal
-        proportions are stable across drags — the actual values are shown
-        through the dimension labels, while the schematic communicates
-        which feature each label refers to. The gap between the two boxes
-        (set by ``SCHEMATIC_MESH_GAP_HALF_WIDTH``) gives the "spacing"
-        dimension a real visual referent.
-
-        Edges are tagged on a string layer so hover-highlight can colour
-        the geometric feature being measured: vertical edges → height,
-        depth edges → thickness. The X-aligned edges along the panel
-        width are untagged (they don't correspond to a single dimension).
-        """
-        hw = cls.SCHEMATIC_MESH_WIDTH_FRAC / 2
-        hd = cls.SCHEMATIC_MESH_DEPTH_FRAC / 2
-        h_top = cls.SCHEMATIC_MESH_HEIGHT_FRAC
-        gap = cls.SCHEMATIC_MESH_GAP_HALF_WIDTH
-
-        layer_name = cls.SCHEMATIC_FEATURE_LAYER_NAME
-        feat_layer = bm.edges.layers.string.get(layer_name) or bm.edges.layers.string.new(layer_name)
-
-        # Edge index → feature tag for one box. Order matches the (a, b)
-        # tuple order below: bottom ring (4) + top ring (4) + verticals (4).
-        edge_tags_per_box = (
-            b"",  # (0,1) bottom-back, X-aligned
-            b"panel_thickness",  # (1,2) bottom-right, Z-aligned
-            b"",  # (2,3) bottom-front, X-aligned
-            b"panel_thickness",  # (3,0) bottom-left, Z-aligned
-            b"",  # (4,5) top-back, X-aligned
-            b"panel_thickness",  # (5,6) top-right, Z-aligned
-            b"",  # (6,7) top-front, X-aligned
-            b"panel_thickness",  # (7,4) top-left, Z-aligned
-            b"panel_height",  # (0,4) vertical back-left
-            b"panel_height",  # (1,5) vertical back-right
-            b"panel_height",  # (2,6) vertical front-right
-            b"panel_height",  # (3,7) vertical front-left
-        )
-
-        # Build two separate wireframe boxes — one on each side of the central
-        # gap. The boxes share the same Y range (0..h_top) and Z range (±hd)
-        # but split the X range so the gap from -gap to +gap stays empty.
-        for x_left, x_right in ((-hw, -gap), (gap, hw)):
-            corners = [
-                bm.verts.new((x_left, 0.0, -hd)),
-                bm.verts.new((x_right, 0.0, -hd)),
-                bm.verts.new((x_right, 0.0, hd)),
-                bm.verts.new((x_left, 0.0, hd)),
-                bm.verts.new((x_left, h_top, -hd)),
-                bm.verts.new((x_right, h_top, -hd)),
-                bm.verts.new((x_right, h_top, hd)),
-                bm.verts.new((x_left, h_top, hd)),
-            ]
-            for tag, (a, b) in zip(
-                edge_tags_per_box,
-                (
-                    (0, 1),
-                    (1, 2),
-                    (2, 3),
-                    (3, 0),  # bottom ring
-                    (4, 5),
-                    (5, 6),
-                    (6, 7),
-                    (7, 4),  # top ring
-                    (0, 4),
-                    (1, 5),
-                    (2, 6),
-                    (3, 7),  # vertical edges
-                ),
-            ):
-                edge = bm.edges.new((corners[a], corners[b]))
-                if tag:
-                    edge[feat_layer] = tag
-
-    @classmethod
-    def _build_wall_mounted_handrail_schematic(cls, bm: "bmesh.types.BMesh", props) -> None:
-        """Stylised wall-mounted handrail: wall outline, hex tube, two L-brackets.
-
-        Three visual elements convey "rail mounted on a wall":
-
-        - **Wall outline** — a wireframe rectangle in the YZ plane at ``z=0``,
-          extending slightly past the rail ends so the wall reads as a
-          surface the rail is *attached to* rather than a coincident frame.
-        - **Handrail tube** — a hexagonal cross-section extruded along ±X
-          at ``z=+clear_s`` (in front of the wall), at ``y=rail_y``.
-        - **L-shaped brackets** at each rail end — from the rail centreline
-          drop a short distance, then run perpendicular back to the wall
-          plane. Mirrors the standard wall-mount bracket geometry: a
-          horizontal arm holding the rail off the wall, a vertical drop
-          attaching to the rail.
-
-        Like ``_build_frameless_panel_schematic``, the schematic uses fixed
-        proportions so the dimension gizmos' anchor points stay aligned
-        with the geometry features regardless of property values.
-        """
-        half_len = cls.SCHEMATIC_MESH_WIDTH_FRAC / 2
-        wall_top = cls.SCHEMATIC_MESH_HEIGHT_FRAC
-        rail_y = cls.SCHEMATIC_MESH_RAIL_Y_FRAC  # rail sits at half wall height
-        radius_s = cls.schematic_rail_radius()
-        clear_s = cls.schematic_rail_clear()
-
-        layer_name = cls.SCHEMATIC_FEATURE_LAYER_NAME
-        feat_layer = bm.edges.layers.string.get(layer_name) or bm.edges.layers.string.new(layer_name)
-
-        # ── Wall outline (rectangle at z=0, slightly wider than the rail) ──
-        # Spans the full schematic height; the rail attaches in the middle,
-        # so the wall reads as "continuing past the rail above and below".
-        # Wall edges stay untagged — they're background context, not a
-        # feature any dimension measures.
-        wall_extra = 0.08
-        wall_x_left = -half_len - wall_extra
-        wall_x_right = half_len + wall_extra
-        wall_corners = [
-            bm.verts.new((wall_x_left, 0.0, 0.0)),
-            bm.verts.new((wall_x_right, 0.0, 0.0)),
-            bm.verts.new((wall_x_right, wall_top, 0.0)),
-            bm.verts.new((wall_x_left, wall_top, 0.0)),
-        ]
-        for a, b in ((0, 1), (1, 2), (2, 3), (3, 0)):
-            bm.edges.new((wall_corners[a], wall_corners[b]))
-
-        # ── Handrail tube (hex cross-section in YZ, extruded along X) ──────
-        # Centred on the rail centreline at (±(half_len - rail_inset),
-        # rail_y, +clear_s) — in front of the wall plane at z=0. The tube
-        # is shorter than the wall so the wall visibly extends past it on
-        # both sides; the L-brackets sit at the tube ends, so the leftmost
-        # bracket no longer coincides with the wall's left edge.
-        rail_inset = cls.SCHEMATIC_RAIL_INSET_FRAC
-        rail_x_left = -half_len + rail_inset
-        rail_x_right = half_len - rail_inset
-        segments = 6
-        ring_left, ring_right = [], []
-        for i in range(segments):
-            theta = 2 * math.pi * i / segments
-            dy = math.cos(theta) * radius_s
-            dz = math.sin(theta) * radius_s
-            ring_left.append(bm.verts.new((rail_x_left, rail_y + dy, clear_s + dz)))
-            ring_right.append(bm.verts.new((rail_x_right, rail_y + dy, clear_s + dz)))
-        # All hex-tube edges tagged "rail_tube" so they highlight together
-        # when the railing_diameter dimension is hovered.
-        for i in range(segments):
-            j = (i + 1) % segments
-            e_left = bm.edges.new((ring_left[i], ring_left[j]))
-            e_right = bm.edges.new((ring_right[i], ring_right[j]))
-            e_axial = bm.edges.new((ring_left[i], ring_right[i]))
-            e_left[feat_layer] = b"rail_tube"
-            e_right[feat_layer] = b"rail_tube"
-            e_axial[feat_layer] = b"rail_tube"
-
-        # ── L-brackets at each rail end (rail → drop → wall) ───────────────
-        # Bracket attach points follow the rail ends, so they're pulled
-        # inward by ``rail_inset`` from the wall edges. From the rail
-        # centreline, drop ``bracket_drop`` in Y, then run perpendicular
-        # back to the wall plane (z=0). The L shape reads as a wall-mount
-        # bracket under the 3/4 tilt. Both bracket segments tagged
-        # "bracket" so they highlight when clear_width OR support_spacing
-        # is hovered (both dimensions measure features of the supports).
-        bracket_drop = 0.06
-        for x in (rail_x_left, rail_x_right):
-            v_rail = bm.verts.new((x, rail_y, clear_s))
-            v_corner = bm.verts.new((x, rail_y - bracket_drop, clear_s))
-            v_wall = bm.verts.new((x, rail_y - bracket_drop, 0.0))
-            e1 = bm.edges.new((v_rail, v_corner))
-            e2 = bm.edges.new((v_corner, v_wall))
-            e1[feat_layer] = b"bracket"
-            e2[feat_layer] = b"bracket"
-
-
 class FlipRailingPathOrder(bpy.types.Operator, tool.Ifc.Operator):
     bl_idname = "bim.flip_railing_path_order"
     bl_label = "Flip Railing Path Order"
@@ -1139,16 +510,6 @@ class EnableEditingRailingPath(bpy.types.Operator, tool.Ifc.Operator):
         [o.select_set(False) for o in context.selected_objects if o != obj]
         assert obj
         props = tool.Model.get_railing_props(obj)
-
-        # Auto-commit any in-progress parametric draft before switching to
-        # path-edit. ``set_props_kwargs_from_ifc_data`` a few lines below
-        # overwrites props with the pset's stored values — without committing
-        # first, anything the user dragged on a dimension gizmo (height,
-        # diameter, …) would be silently discarded the moment path-edit
-        # starts.
-        if props.is_editing:
-            tool.Parametric.commit_object_draft(obj, "bim.finish_editing_railing")
-
         data = tool.Model.get_modeling_bbim_pset_data(obj, "BBIM_Railing")["data_dict"]
         # required since we could load pset from .ifc and BIMRoofProperties won't be set
         props.set_props_kwargs_from_ifc_data(data)

src/bonsai/bonsai/bim/module/model/slab.py

@@ -271,7 +271,7 @@ class DumbSlabPlaner:
                 # For instances, a 30 degrees angled extrusion with positive direction has the same extrusion direction as a
                 # -150 degrees angled extrusion with negative direction. The difference lies in the object's rotation.
                 # This means that things can get messy if the user changes the object x angle somehow. We have to figure out an alternative approach.
-                existing_x_angle = tool.Model.get_existing_x_angle(extrusion)
+                existing_x_angle = obj.rotation_euler.x
                 existing_x_angle = 0 if tool.Cad.is_x(existing_x_angle, 0, tolerance=0.001) else existing_x_angle
                 existing_x_angle = 0 if tool.Cad.is_x(existing_x_angle, pi, tolerance=0.001) else existing_x_angle
                 existing_x_angle = 0 if tool.Cad.is_x(existing_x_angle, 2 * pi, tolerance=0.001) else existing_x_angle
@@ -620,14 +620,6 @@ class EnableEditingExtrusionProfile(bpy.types.Operator, tool.Ifc.Operator):
     def _execute(self, context):
         self.unit_scale = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
         obj = context.active_object
-
-        # Commit any in-progress parametric (gizmo) draft on this object
-        # before switching to profile-edit. Otherwise the in-memory draft
-        # state is overwritten when the profile mesh is imported below,
-        # silently discarding the user's pending dimension edits.
-        if feature := tool.Parametric.is_object_editing(obj):
-            tool.Parametric.commit_object_draft(obj, feature.finish_op)
-
         element = tool.Ifc.get_entity(obj)
 
         body = ifcopenshell.util.representation.get_representation(element, "Model", "Body", "MODEL_VIEW")
@@ -999,74 +991,3 @@ class RecalculateSlab(bpy.types.Operator, tool.Ifc.Operator):
 
         tool.Model.recalculate_walls(walls)
         return {"FINISHED"}
-
-
-class EnableEditingSlab(bpy.types.Operator, tool.Ifc.Operator):
-    """Open the slab disconnect-access mode. Pure UI toggle: flips
-    ``obj.BIMSlabProperties.is_editing`` so the per-wall disconnect
-    gizmos surface on the slab. ``tool.Ifc.Operator`` base because the
-    parametric framework's universal dispatcher routes through
-    ``tool.Parametric.run_bim_op``, which only accepts that subclass for
-    undo-safe lifecycle. No IFC mutation."""
-
-    bl_idname = "bim.enable_editing_slab"
-    bl_label = "Edit Slab Connections"
-    bl_description = "Show disconnect icons for every wall clipped to this slab"
-    bl_options = {"REGISTER", "UNDO"}
-
-    @classmethod
-    def poll(cls, context):
-        obj = context.active_object
-        if obj is None:
-            return False
-        element = tool.Ifc.get_entity(obj)
-        return element is not None and element.is_a("IfcSlab")
-
-    def _execute(self, context):
-        context.active_object.BIMSlabProperties.is_editing = True
-        return {"FINISHED"}
-
-
-class CancelEditingSlab(bpy.types.Operator, tool.Ifc.Operator):
-    """Close the slab disconnect-access mode."""
-
-    bl_idname = "bim.cancel_editing_slab"
-    bl_label = "Close Slab Edit"
-    bl_description = "Hide the slab disconnect icons"
-    bl_options = {"REGISTER", "UNDO"}
-
-    @classmethod
-    def poll(cls, context):
-        obj = context.active_object
-        if obj is None:
-            return False
-        element = tool.Ifc.get_entity(obj)
-        return element is not None and element.is_a("IfcSlab")
-
-    def _execute(self, context):
-        context.active_object.BIMSlabProperties.is_editing = False
-        return {"FINISHED"}
-
-
-class FinishEditingSlab(bpy.types.Operator, tool.Ifc.Operator):
-    """Close the slab disconnect-access mode. Same body as Cancel — slab
-    edit is a pure UI gate with no IFC draft to commit; the framework
-    requires both ``bim.finish_editing_<name>`` and
-    ``bim.cancel_editing_<name>`` to exist by name convention."""
-
-    bl_idname = "bim.finish_editing_slab"
-    bl_label = "Finish Slab Edit"
-    bl_description = "Hide the slab disconnect icons"
-    bl_options = {"REGISTER", "UNDO"}
-
-    @classmethod
-    def poll(cls, context):
-        obj = context.active_object
-        if obj is None:
-            return False
-        element = tool.Ifc.get_entity(obj)
-        return element is not None and element.is_a("IfcSlab")
-
-    def _execute(self, context):
-        context.active_object.BIMSlabProperties.is_editing = False
-        return {"FINISHED"}

src/bonsai/bonsai/bim/module/model/ui.py

@@ -22,9 +22,9 @@ from collections.abc import Iterable
 from typing import TYPE_CHECKING, Any
 
 import bpy
-import ifcopenshell.util.unit
 from bpy.types import Panel
 
+import ifcopenshell.util.unit
 import bonsai.bim
 import bonsai.tool as tool
 from bonsai.bim.helper import prop_with_search

src/bonsai/bonsai/bim/module/model/wall.py

@@ -48,7 +48,6 @@ import mathutils.geometry
 import numpy as np
 from mathutils import Matrix, Vector
 
-import bonsai.core.connection
 import bonsai.core.geometry
 import bonsai.core.model as core
 import bonsai.core.root
@@ -63,6 +62,7 @@ from bonsai.bim.module.model.decorator import (
     _BBOX_HIGHLIGHT_LINE_WIDTH,
     PolylineDecorator,
     ProductDecorator,
+    _fill_quads_alpha,
     bbox_world_edges,
     draw_polyline_segments,
 )
@@ -108,50 +108,6 @@ def _wall_gizmo_poll_gate(context: bpy.types.Context) -> bool:
     return True
 
 
-def _resolve_active_partner_pair(
-    context: bpy.types.Context,
-) -> "tuple[bpy.types.Object, bpy.types.Object, ifcopenshell.entity_instance, ifcopenshell.entity_instance] | None":
-    """Return ``(active_obj, partner_obj, active_elem, partner_elem)`` for a
-    selection of exactly two IFC-bound objects with the active one named,
-    else ``None``. Used by every 2-selection gizmo to skip the standard
-    "resolve active + partner + IFC entities" preamble."""
-    active = tool.Blender.get_active_object(is_selected=True)
-    if active is None:
-        return None
-    selected = list(tool.Blender.get_selected_objects())
-    if len(selected) != 2:
-        return None
-    partner = next((o for o in selected if o != active), None)
-    if partner is None:
-        return None
-    active_elem = tool.Ifc.get_entity(active)
-    partner_elem = tool.Ifc.get_entity(partner)
-    if active_elem is None or partner_elem is None:
-        return None
-    return active, partner, active_elem, partner_elem
-
-
-def _slab_connection_gizmo_poll_gate(context: bpy.types.Context, *, require_editing: bool = False) -> bool:
-    """Shared gate for slab-side connection gizmos: exactly 1 IfcSlab
-    selected, not an array child, has at least one wall clipped to its
-    underside. With ``require_editing=True`` additionally requires the
-    slab's parametric edit lifecycle to be active (pen icon clicked) so
-    the gizmo only surfaces after explicit opt-in."""
-    active = tool.Blender.get_active_object(is_selected=True)
-    if active is None:
-        return False
-    if len(tool.Blender.get_selected_objects()) != 1:
-        return False
-    element = tool.Ifc.get_entity(active)
-    if element is None or not element.is_a("IfcSlab"):
-        return False
-    if tool.Blender.Modifier.any_selected_is_array_child():
-        return False
-    if require_editing and not tool.Model.get_slab_props(active).is_editing:
-        return False
-    return any(tool.Wall.iter_slab_wall_connections(element))
-
-
 def _wall_topology_gizmo_poll_gate(context: bpy.types.Context) -> bool:
     """Tighter gate for wall topology gizmos (merge / join / extend / unjoin
     / fillet): base ``_wall_gizmo_poll_gate`` plus an array-child filter.
@@ -290,15 +246,6 @@ def _resync_walls_after_mutation(objs: Iterable["bpy.types.Object | None"]) -> N
         _maybe_resync_wall_props_from_ifc(obj)
 
 
-def _regenerate_walls(objs: "Iterable[bpy.types.Object | None]") -> None:
-    """Rebuild every wall in ``objs`` from current IFC state — extrusion,
-    openings, and any underside slab clip — so the caller doesn't carry
-    feature-specific dispatch."""
-    for obj in objs:
-        if obj is not None:
-            tool.Model.regenerate_wall(obj)
-
-
 class _CommitWallDraftsFirstMixin:
     """Operator mixin that flushes any in-progress wall parametric drafts in
     the current selection before delegating to the subclass's ``_perform``.
@@ -338,29 +285,19 @@ class UnjoinWalls(_CommitWallDraftsFirstMixin, bpy.types.Operator, tool.Ifc.Oper
         _resync_walls_after_mutation(tool.Blender.get_selected_objects())
 
 
-class DisconnectElements(_CommitWallDraftsFirstMixin, bpy.types.Operator, tool.Ifc.Operator):
-    """Disconnect two IFC elements given their GlobalIds — generic dispatcher
-    that infers the connection rel kind via tool.Connection.find_rels and runs
-    the right post-disconnect cleanup:
+class UnjoinWallPathConnection(_CommitWallDraftsFirstMixin, bpy.types.Operator, tool.Ifc.Operator):
+    """Surgical counterpart to `UnjoinWalls`: disconnect the active wall from one
+    specific partner wall, leaving the active wall's other connections intact. The
+    partner is identified by IFC GlobalId — invariant under Blender-object renames,
+    file save/reload, and the undo stack — set on the operator properties by the
+    single-wall unjoin gizmo at click time."""
 
-    - ``"path"`` (IfcRelConnectsPathElements) → removes every rel between
-      the pair (catches both orientations) via remove_connection + recreates
-      both walls + resyncs drafts.
-    - ``"element-top"`` (IfcRelConnectsElements with Description=="TOP") →
-      disconnect_element + regenerate_wall_to_underside on the wall side.
-    - ``"element"`` (other IfcRelConnectsElements) → disconnect_element only.
-
-    Both endpoints by GlobalId so the dispatch survives rename / undo / save.
-    Replaces the previous typed UnjoinWallPathConnection + DisconnectWallSlab
-    operators with one entry-point gizmos and shortcuts can bind to."""
-
-    bl_idname = "bim.disconnect_elements"
-    bl_label = "Disconnect Elements"
-    bl_description = "Remove the connection between two IFC elements identified by GlobalId"
+    bl_idname = "bim.unjoin_wall_path_connection"
+    bl_label = "Unjoin Wall Connection"
+    bl_description = "Disconnect the active wall from a single specific partner wall"
     bl_options = {"REGISTER", "UNDO"}
 
-    element_a_guid: bpy.props.StringProperty(name="Element A GlobalId")
-    element_b_guid: bpy.props.StringProperty(name="Element B GlobalId")
+    other_wall_guid: bpy.props.StringProperty(name="Other Wall GlobalId")
 
     @classmethod
     def poll(cls, context):
@@ -372,54 +309,44 @@ class DisconnectElements(_CommitWallDraftsFirstMixin, bpy.types.Operator, tool.I
         return True
 
     def _perform(self, context):
-        ifc_file = tool.Ifc.get()
-        try:
-            elem_a = ifc_file.by_guid(self.element_a_guid) if self.element_a_guid else None
-            elem_b = ifc_file.by_guid(self.element_b_guid) if self.element_b_guid else None
-        except RuntimeError:
-            elem_a = elem_b = None
-        if elem_a is None or elem_b is None:
-            self.report({"ERROR"}, "Could not resolve elements from supplied GlobalIds.")
+        active = tool.Blender.get_active_object(is_selected=True)
+        if not active:
+            self.report({"ERROR"}, "Could not resolve walls for surgical unjoin.")
             return
-        rels = tool.Connection.find_rels(elem_a, elem_b)
-        if not rels:
-            self.report({"ERROR"}, "No connection found between elements.")
+        elem_active = tool.Ifc.get_entity(active)
+        if not elem_active:
+            self.report({"ERROR"}, "Active object is not bound to an IFC entity.")
             return
-        # The fillet corner's join with its source walls defines the fillet's
-        # identity — unjoining there would tear down the chord axis reference
-        # without rebuilding the source walls' miter cuts. Deleting the corner
-        # wall is the supported teardown, which cascades back to the source
-        # walls via the connection-cleanup handler.
-        either_is_fillet = tool.Parametric.is_fillet_corner_wall(elem_a) or tool.Parametric.is_fillet_corner_wall(
-            elem_b
-        )
-        if either_is_fillet and any(k == "path" for _, k in rels):
-            self.report(
-                {"INFO"},
-                "Fillet wall path connections can't be unjoined — delete the fillet wall element to remove the corner.",
-            )
+        elem_other = None
+        if self.other_wall_guid:
+            try:
+                elem_other = tool.Ifc.get().by_guid(self.other_wall_guid)
+            except RuntimeError:
+                elem_other = None
+        other = tool.Ifc.get_object(elem_other) if elem_other else None
+        if not elem_other or not other:
+            self.report({"ERROR"}, "Could not resolve walls for surgical unjoin.")
             return
-        path_objs: list[bpy.types.Object] = []
-        for subject, kind in rels:
-            bonsai.core.connection.disconnect_rel(
-                tool.Ifc,
-                tool.Geometry,
-                tool.Model,
-                tool.Connection,
-                subject=subject,
-                kind=kind,
-                elem=elem_a,
-                partner=elem_b,
-            )
-            if kind == "path":
-                obj_a = tool.Ifc.get_object(elem_a)
-                obj_b = tool.Ifc.get_object(elem_b)
-                if obj_a is not None and obj_a not in path_objs:
-                    path_objs.append(obj_a)
-                if obj_b is not None and obj_b not in path_objs:
-                    path_objs.append(obj_b)
-        if path_objs:
-            _resync_walls_after_mutation(path_objs)
+        # Walk the inverse graph for the specific IfcRelConnectsPathElements joining
+        # these two walls and remove only that one. `disconnect_path`'s
+        # (relating, related) mode only inspects `relating.ConnectedTo`, so a single
+        # call misses the rel when it was authored with the opposite orientation.
+        rels = [
+            rel
+            for rel in getattr(elem_active, "ConnectedTo", [])
+            if rel.is_a("IfcRelConnectsPathElements") and rel.RelatedElement == elem_other
+        ] + [
+            rel
+            for rel in getattr(elem_active, "ConnectedFrom", [])
+            if rel.is_a("IfcRelConnectsPathElements") and rel.RelatingElement == elem_other
+        ]
+        for rel in rels:
+            bonsai.core.geometry.remove_connection(tool.Geometry, connection=rel)
+        # Recreate body+axis on both walls so the mesh state matches the IFC mutation
+        # and stale miter cuts are dropped.
+        tool.Model.recreate_wall(elem_active, active)
+        tool.Model.recreate_wall(elem_other, other)
+        _resync_walls_after_mutation([active, other])
 
 
 class ExtendWallsToUnderside(_CommitWallDraftsFirstMixin, bpy.types.Operator, tool.Ifc.Operator):
@@ -442,7 +369,7 @@ class ExtendWallsToUnderside(_CommitWallDraftsFirstMixin, bpy.types.Operator, to
             element = tool.Ifc.get_entity(obj)
             if not element:
                 continue
-            if tool.Parametric.is_path_connectable_wall(element):
+            if tool.Model.get_usage_type(element) == "LAYER2":
                 walls.append(obj)
             else:
                 slabs.append(obj)
@@ -463,7 +390,7 @@ class RegenerateWallToUnderside(bpy.types.Operator, tool.Ifc.Operator):
         wall_objs = [
             obj
             for obj in tool.Blender.get_selected_objects()
-            if (element := tool.Ifc.get_entity(obj)) and tool.Parametric.is_path_connectable_wall(element)
+            if (element := tool.Ifc.get_entity(obj)) and tool.Model.get_usage_type(element) == "LAYER2"
         ]
         if wall_objs:
             core.regenerate_wall_to_underside(tool.Ifc, tool.Geometry, tool.Model, wall_objs)
@@ -715,14 +642,9 @@ class SplitWall(_CommitWallDraftsFirstMixin, bpy.types.Operator, tool.Ifc.Operat
 
     def _perform(self, context):
         selected_objs = tool.Model.get_selected_mesh_objects()
-        post_split_walls: list[bpy.types.Object] = []
         for obj in selected_objs:
-            new_obj = DumbWallJoiner().split(obj, context.scene.cursor.location)
-            post_split_walls.append(obj)
-            if new_obj is not None and new_obj not in post_split_walls:
-                post_split_walls.append(new_obj)
-        _resync_walls_after_mutation(post_split_walls)
-        _regenerate_walls(post_split_walls)
+            DumbWallJoiner().split(obj, context.scene.cursor.location)
+        _resync_walls_after_mutation(selected_objs)
         return {"FINISHED"}
 
 
@@ -752,13 +674,11 @@ class MergeWall(_CommitWallDraftsFirstMixin, bpy.types.Operator, tool.Ifc.Operat
         active_obj = context.active_object
         assert active_obj
         selected_objs = tool.Model.get_selected_mesh_objects()
-        # Active-is-survivor — matches Blender's Ctrl+J / "merge at last"
-        # convention. The first argument survives, the second is consumed,
-        # so the active wall ends up absorbing the other.
-        other_obj = next(o for o in selected_objs if o != active_obj)
-        DumbWallJoiner().merge(active_obj, other_obj)
-        _maybe_resync_wall_props_from_ifc(active_obj)
-        _regenerate_walls([active_obj])
+        # The merge deletes the second argument when the walls are collinear;
+        # only the first survives, so the resync targets the non-active wall.
+        surviving_obj = next(o for o in selected_objs if o != active_obj)
+        DumbWallJoiner().merge(surviving_obj, active_obj)
+        _maybe_resync_wall_props_from_ifc(surviving_obj)
         return {"FINISHED"}
 
 
@@ -825,7 +745,6 @@ class ChangeExtrusionDepth(bpy.types.Operator, tool.Ifc.Operator):
 
         if layer2_objs:
             tool.Model.recalculate_walls(layer2_objs)
-            _resync_walls_after_mutation(layer2_objs)
         return {"FINISHED"}
 
 
@@ -872,7 +791,7 @@ class ChangeExtrusionXAngle(bpy.types.Operator, tool.Ifc.Operator):
                 extrusion.Depth = perpendicular_depth
             else:
                 if tool.Model.get_usage_type(element) == "LAYER3":
-                    existing_x_angle = tool.Model.get_existing_x_angle(extrusion)
+                    existing_x_angle = obj.rotation_euler.x
                     existing_x_angle = 0 if tool.Cad.is_x(existing_x_angle, 0, tolerance=0.001) else existing_x_angle
                     existing_x_angle = 0 if tool.Cad.is_x(existing_x_angle, pi, tolerance=0.001) else existing_x_angle
 
@@ -941,7 +860,6 @@ class ChangeExtrusionXAngle(bpy.types.Operator, tool.Ifc.Operator):
 
         if layer2_objs:
             tool.Model.recalculate_walls(layer2_objs)
-            _resync_walls_after_mutation(layer2_objs)
         return {"FINISHED"}
 
 
@@ -964,7 +882,6 @@ class ChangeLayerLength(bpy.types.Operator, tool.Ifc.Operator):
         selected_objs = tool.Model.get_selected_mesh_ifc_objects()
         for obj in selected_objs:
             joiner.set_length(obj, self.length)
-        _resync_walls_after_mutation(selected_objs)
 
 
 class OffsetWalls(bpy.types.Operator, tool.Ifc.Operator):
@@ -1546,7 +1463,7 @@ class DumbWallJoiner:
         body = copy.deepcopy(axis1["reference"])
         tool.Model.recreate_wall(element1, wall1)
 
-    def split(self, wall1: bpy.types.Object, target: Vector) -> "bpy.types.Object | None":
+    def split(self, wall1: bpy.types.Object, target: Vector) -> None:
         unit_scale = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
 
         element1 = tool.Ifc.get_entity(wall1)
@@ -1567,13 +1484,6 @@ class DumbWallJoiner:
         wall2 = self.duplicate_wall(wall1)
         element2 = tool.Ifc.get_entity(wall2)
 
-        # The duplicate inherits wall1's slab-trim boolean chain (copied by
-        # copy_class) but ``BBIM_Boolean.Data`` carries wall1's stale ids, so
-        # ``get_manual_booleans(element2)`` returns empty and the regenerator
-        # rebuilds wall2's body without those clips. Strip them up front so
-        # wall2 starts clean before the axis + placement reshape.
-        tool.Model.strip_underside_booleans(element2)
-
         # Get the ATEND connection from wall1 to use it in wall2
         relating_element = None
         connections = element1.ConnectedTo
@@ -1633,16 +1543,13 @@ class DumbWallJoiner:
             r.RelatedOpeningElement for r in list(element1.HasOpenings) if r.RelatedOpeningElement.HasFillings
         ]:
             rel = opening.HasFillings[0]
+            filling = rel.RelatedBuildingElement
+            filling_obj = tool.Ifc.get_object(filling)
+            filling_location = filling_obj.matrix_world.translation
+            _, filling_position = mathutils.geometry.intersect_point_line(filling_location.to_2d(), *axis_world_2d)
             min_t, max_t = _opening_axis_extent(opening, axis_world_2d, unit_scale)
-            # Use the opening's axis-projected midpoint to classify the side.
-            # The filling's ``matrix_world.translation`` is flip-fragile —
-            # flipping rotates the filler 180° + translates so the bbox
-            # stays visually in place, moving the door origin to the
-            # opposite corner, which would mis-classify a flipped door
-            # centred over the cut.
-            opening_midpoint = (min_t + max_t) / 2
             void_straddles = min_t < cut_percentage < max_t
-            if opening_midpoint > cut_percentage:
+            if filling_position > cut_percentage:
                 # The filling should be moved from element1 to element2.
                 new_opening = ifcopenshell.api.root.copy_class(tool.Ifc.get(), product=opening)
                 new_opening.VoidsElements[0].RelatingBuildingElement = element2
@@ -1657,16 +1564,13 @@ class DumbWallJoiner:
 
                 rel.RelatingOpeningElement = new_opening
 
-                if void_straddles:
-                    # Filling moved to element2, but void straddles — add a
-                    # pure-void copy back to element1. Read from the original
-                    # ``opening`` whose ObjectPlacement still references
-                    # element1; ``new_opening`` was rebound to element2 and
-                    # would copy element2's frame instead.
-                    _add_void_copy(element1, opening)
-
                 # Remove the old opening
                 ifcopenshell.api.feature.remove_feature(tool.Ifc.get(), feature=opening)
+
+                if void_straddles:
+                    # Filling moved to element2, but void straddles — add a
+                    # pure-void copy back to element1 so its body still gets cut.
+                    _add_void_copy(element1, new_opening)
             elif void_straddles:
                 # Filling stays on element1, but void straddles — add a pure-void
                 # copy to element2 so its body gets cut.
@@ -1679,7 +1583,6 @@ class DumbWallJoiner:
 
         tool.Model.recreate_wall(element1, wall1)
         tool.Model.recreate_wall(element2, wall2)
-        return wall2
 
     def flip(self, wall1: bpy.types.Object) -> None:
         if tool.Ifc.is_moved(wall1):
@@ -1735,14 +1638,7 @@ class DumbWallJoiner:
         p2[0] = max(x_ordinates)
         self.set_axis(element1, p1, p2)
 
-        # ConnectedTo / ConnectedFrom carry both ``IfcRelConnectsPathElements``
-        # (the wall-wall joins this loop migrates) and
-        # ``IfcRelConnectsElements`` (the slab underside clip). Only the
-        # path rels expose ``RelatingConnectionType`` / ``RelatedConnectionType``;
-        # the element rels die with element2 via the trailing cascade delete.
         for rel in element2.ConnectedTo:
-            if not rel.is_a("IfcRelConnectsPathElements"):
-                continue
             ifcopenshell.api.geometry.disconnect_path(
                 tool.Ifc.get(), element=element1, connection_type=rel.RelatingConnectionType
             )
@@ -1755,8 +1651,6 @@ class DumbWallJoiner:
             )
 
         for rel in element2.ConnectedFrom:
-            if not rel.is_a("IfcRelConnectsPathElements"):
-                continue
             ifcopenshell.api.geometry.disconnect_path(
                 tool.Ifc.get(), element=element1, connection_type=rel.RelatedConnectionType
             )
@@ -1768,26 +1662,6 @@ class DumbWallJoiner:
                 related_connection=rel.RelatedConnectionType,
             )
 
-        # Re-host openings from the discarded wall to the survivor before
-        # the cascade delete tears down element2's voids and any filling
-        # that depends on them. ``edit_object_placement`` preserves the
-        # opening's world position when element1 and element2 have
-        # different placements — a ``PlacementRelTo`` swap alone would
-        # shift the opening as the relative offset changes.
-        ifc_file = tool.Ifc.get()
-        for rel in list(element2.HasOpenings):
-            opening = rel.RelatedOpeningElement
-            rel.RelatingBuildingElement = element1
-            if opening.ObjectPlacement:
-                world_matrix = ifcopenshell.util.placement.get_local_placement(opening.ObjectPlacement)
-                ifcopenshell.api.geometry.edit_object_placement(
-                    ifc_file,
-                    product=opening,
-                    matrix=world_matrix,
-                    is_si=False,
-                    should_transform_children=False,
-                )
-
         tool.Model.recreate_wall(element1, wall1)
 
         tool.Geometry.delete_ifc_object(wall2)
@@ -2584,9 +2458,7 @@ class ExtendWallToCursor(bpy.types.Operator, tool.Ifc.Operator):
             tool.Model,
             context.scene.cursor.location,
         )
-        affected = list(tool.Blender.get_selected_objects())
-        _resync_walls_after_mutation(affected)
-        _regenerate_walls(affected)
+        _resync_walls_after_mutation(tool.Blender.get_selected_objects())
         return {"FINISHED"}
 
 
@@ -2619,7 +2491,6 @@ class ExtendWallHeightToCursor(bpy.types.Operator, tool.Ifc.Operator):
         with bpy.context.temp_override(active_object=obj, selected_objects=[obj]):
             bpy.ops.bim.change_extrusion_depth(depth=new_height)
         _maybe_resync_wall_props_from_ifc(obj)
-        _regenerate_walls([obj])
         return {"FINISHED"}
 
 
@@ -3246,12 +3117,6 @@ def regenerate_fillet_corner_wall(element: ifcopenshell.entity_instance, obj: bp
     # the banana body. If a neighbour moved, the new placement follows; if
     # neither moved, the new matrix equals the old within floating-point noise.
     _apply_fillet_corner_geometry(ifc_file, obj, geom, wall_a_obj)
-    # The body rebuild swaps the wall's representation, so any prior underside
-    # clip is gone. Re-clip from the surviving TOP rels so an extend-to-slab
-    # applied to a fillet wall isn't silently wiped on the next neighbour
-    # recalc, ChangeExtrusionDepth, or split / merge call site.
-    if tool.Model.has_underside_connection(element):
-        core.regenerate_wall_to_underside(tool.Ifc, tool.Geometry, tool.Model, [obj])
 
 
 class EnableWallFilletPreview(bpy.types.Operator):
@@ -3371,19 +3236,6 @@ class CancelWallFilletPreview(bpy.types.Operator):
         props = preview_base.get_preview_props(context, "wall_fillet")
         if props is None or not props.is_active:
             return {"CANCELLED"}
-        # Clear the corner's edit flag so the connection disconnect gizmos
-        # disappear in lockstep with the radius preview when the user
-        # cancels. The id read happens BEFORE clear_preview_state wipes it.
-        corner_id = props.editing_corner_id
-        if corner_id:
-            ifc_file = tool.Ifc.get()
-            if ifc_file is not None:
-                try:
-                    corner_obj = tool.Ifc.get_object(ifc_file.by_id(corner_id))
-                except RuntimeError:
-                    corner_obj = None
-                if corner_obj is not None:
-                    tool.Model.get_wall_props(corner_obj).is_editing = False
         preview_base.clear_preview_state(props)
         return {"FINISHED"}
 
@@ -3457,11 +3309,6 @@ class EnableWallFilletPreviewFromCorner(bpy.types.Operator):
         props.radius = float(radius)
         props.editing_corner_id = corner_elem.id()
         props.is_active = True
-        # Flag the corner as "in edit mode" so the wall-side connection
-        # disconnect gizmos surface in parallel with the fillet preview —
-        # one pen-icon click enters BOTH radius retune AND connection
-        # inspection.
-        tool.Model.get_wall_props(corner_obj).is_editing = True
         return {"FINISHED"}
 
 
@@ -3742,7 +3589,7 @@ class GizmoWallExtendVertically(bpy.types.GizmoGroup, _WallGeomCachedBillboardin
             return False
         other = next(o for o in selected if o is not active)
         other_element = tool.Ifc.get_entity(other)
-        if not other_element or not tool.Parametric.is_path_connectable_wall(other_element):
+        if not other_element or tool.Model.get_usage_type(other_element) != "LAYER2":
             return False
         return True
 
@@ -4008,17 +3855,15 @@ class GizmoWallLinkToggle(gizmo.GizmoLinkToggle, bpy.types.Gizmo):
 
 class GizmoWallUnjoinSingle(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMixin):
     """Activates when exactly one LAYER2 wall is selected. Surfaces an unjoin icon at
-    every connection location on the wall — wall-wall path connections via
-    IfcRelConnectsPathElements + wall-slab underside clips via IfcRelConnectsElements
-    with Description=="TOP". A wall may participate in many such rels (up to 1 ATSTART
-    + 1 ATEND by end, plus unlimited ATPATH T-junctions, plus one rel per clipped
-    slab), so a pool of icons is preallocated and hidden on a per-frame basis based
-    on the live connection set.
+    every join location inferred from the wall's IfcRelConnectsPathElements inverse
+    graph — the single-selection mirror of `GizmoWallJoinIntersection`'s two-wall
+    unjoin state. A wall may participate in many such rels (up to 1 ATSTART + 1 ATEND
+    by end, plus unlimited ATPATH T-junctions), so a pool of icons is preallocated
+    and hidden on a per-frame basis based on the live connection set.
 
-    Each visible icon dispatches `bim.disconnect_elements` with the active wall +
-    partner element GlobalIds set on the bound operator properties, so a click
-    removes only the single rel under that icon — the other connections on the
-    same wall survive.
+    Each visible icon dispatches `bim.unjoin_wall_path_connection` with the partner
+    wall's GlobalId set on the bound operator properties, so a click removes only
+    the single rel under that icon — the other connections on the same wall survive.
 
     Mutually exclusive with `GizmoWallJoinIntersection` via `poll()` (that group
     requires len(selected) == 2; this one requires 1)."""
@@ -4036,25 +3881,10 @@ class GizmoWallUnjoinSingle(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMix
     # creation is forbidden — so the pool must be sized upfront for the worst case.
     POOL_SIZE = 16
     ICON_SCALE = 0.35
-    SLAB_STACK_MAX = 5
-    SLAB_STACK_OFFSET_Z = 0.5
-    # Muted gray used for connection icons that are visible (the connection
-    # exists) but inert (clicking dispatches a no-op + INFO report). Fillet
-    # corner ↔ source-wall joins use this — disconnecting them would tear
-    # down the fillet's chord axis reference, so the supported teardown is
-    # deleting the corner wall instead.
-    LOCKED_COLOR: ClassVar[tuple[float, float, float]] = (0.5, 0.5, 0.5)
 
     @classmethod
     def poll(cls, context: bpy.types.Context) -> bool:
-        # Bypass the shared topology gate's ``any_preview_active`` block —
-        # ``BIMWallProperties.is_editing`` is the real gate for this gizmo
-        # group, and that flag is set both by the regular wall edit lifecycle
-        # AND by the fillet preview entry (so a fillet corner under preview
-        # surfaces its connections in parallel with the radius drag).
-        if not tool.Blender.are_viewport_gizmos_enabled():
-            return False
-        if tool.Blender.Modifier.any_selected_is_array_child():
+        if not _wall_topology_gizmo_poll_gate(context):
             return False
         active = tool.Blender.get_active_object(is_selected=True)
         if active is None:
@@ -4072,9 +3902,6 @@ class GizmoWallUnjoinSingle(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMix
 
     def setup(self, context: bpy.types.Context) -> None:
         default_color, highlight_color = self.get_decoration_colors()
-        # Stashed so per-frame ``_bind_unjoin_icon`` can restore the active
-        # tone when an icon was muted in a previous frame for fillet lock.
-        self._default_unjoin_color = default_color
         # Bind the operator on each pool icon ONCE at setup time and keep the returned
         # OperatorProperties handles. target_set_operator allocates a fresh handle on
         # every call, so calling it from position_gizmos (which fires every redraw
@@ -4084,11 +3911,11 @@ class GizmoWallUnjoinSingle(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMix
         self.unjoin_op_props = []
         for _ in range(self.POOL_SIZE):
             icon = self.setup_icon_gizmo(
-                "VIEW3D_GT_wall_link_toggle", default_color, highlight_color, "bim.disconnect_elements"
+                "VIEW3D_GT_wall_link_toggle", default_color, highlight_color, "bim.unjoin_wall_path_connection"
             )
             icon.hide = True
             self.unjoin_icons.append(icon)
-            self.unjoin_op_props.append(icon.target_set_operator("bim.disconnect_elements"))
+            self.unjoin_op_props.append(icon.target_set_operator("bim.unjoin_wall_path_connection"))
 
     def position_gizmos(self, context: bpy.types.Context) -> None:
         # Default: hide every pool slot. The visible-set is rebuilt from the live
@@ -4109,28 +3936,15 @@ class GizmoWallUnjoinSingle(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMix
         billboard_rot = gizmo.get_billboard_rotation(context)
         clearance = gizmo.top_down_clearance(context, billboard_rot)
 
-        path_connections = _get_wall_connections_cached(self, elem)
-        slab_connections = list(tool.Wall.iter_wall_slab_connections(elem))
-        slab_overflow = max(0, len(slab_connections) - self.SLAB_STACK_MAX)
-        if slab_overflow and not getattr(self, "_slab_cap_warned", False):
+        connections = _get_wall_connections_cached(self, elem)
+        if len(connections) > self.POOL_SIZE and not getattr(self, "_pool_cap_warned", False):
             print(
-                f"[bonsai] GizmoWallUnjoinSingle: wall has {len(slab_connections)} slab "
-                f"connections; only the first {self.SLAB_STACK_MAX} are shown stacked."
-            )
-            self._slab_cap_warned = True
-        slab_connections = slab_connections[: self.SLAB_STACK_MAX]
-        total = len(path_connections) + len(slab_connections)
-        if total > self.POOL_SIZE and not getattr(self, "_pool_cap_warned", False):
-            print(
-                f"[bonsai] GizmoWallUnjoinSingle: wall has {total} connections "
-                f"({len(path_connections)} path + {len(slab_connections)} slab); "
+                f"[bonsai] GizmoWallUnjoinSingle: wall has {len(connections)} path connections; "
                 f"only the first {self.POOL_SIZE} unjoin gizmos are shown."
             )
             self._pool_cap_warned = True
 
-        slot_idx = 0
-        self_is_fillet = tool.Parametric.is_fillet_corner_wall(elem)
-        for other_elem, self_ct, other_ct in path_connections:
+        for slot_idx, (other_elem, self_ct, other_ct) in enumerate(connections):
             if slot_idx >= self.POOL_SIZE:
                 break
             other_obj = tool.Ifc.get_object(other_elem)
@@ -4141,224 +3955,20 @@ class GizmoWallUnjoinSingle(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMix
                 continue
             seg_other = _wall_axis_world_segment_from_geom(other_obj, other_geom)
             location = tool.Wall.path_connection_location_world(seg_self, self_ct, seg_other, other_ct)
-            is_locked = self_is_fillet or tool.Parametric.is_fillet_corner_wall(other_elem)
-            self._bind_unjoin_icon(
-                slot_idx, location + clearance, billboard_rot, elem, other_elem, other_obj, is_locked=is_locked
-            )
-            slot_idx += 1
-
-        for stack_idx, (slab_elem, _rel) in enumerate(slab_connections):
-            if slot_idx >= self.POOL_SIZE:
-                break
-            slab_obj = tool.Ifc.get_object(slab_elem)
-            if slab_obj is None:
-                continue
-            location = tool.Wall.wall_slab_connection_location_world(wall_obj, slab_obj)
-            if location is None:
-                continue
-            # Stack vertically so each slab gets a distinct clickable icon;
-            # hover-highlight then shows the user which slab they're about to
-            # disconnect from.
-            stacked = location + Vector((0.0, 0.0, stack_idx * self.SLAB_STACK_OFFSET_Z))
-            self._bind_unjoin_icon(slot_idx, stacked + clearance, billboard_rot, elem, slab_elem, slab_obj)
-            slot_idx += 1
-
-    def _bind_unjoin_icon(
-        self, slot_idx, location, billboard_rot, active_elem, partner_elem, partner_obj, *, is_locked=False
-    ):
-        """Place + bind one pool icon to a (active, partner) GlobalId pair.
-
-        Only the GlobalId properties are rewritten per frame; the operator
-        binding itself is the long-lived handle set up at setup() time. GlobalId
-        (not Blender object name) keeps the binding stable across renames, file
-        save/reload, and any sit-in-the-undo-stack interlude between dispatch
-        and execute. The partner Blender object is mirrored onto the icon for
-        its hover-outline draw, since the Gizmo API exposes
-        ``target_set_operator`` but no symmetric reader.
-
-        ``is_locked=True`` (fillet corner involvement) writes a muted color
-        instead of the active tone; the GUIDs still propagate so the bound
-        operator can surface a friendly INFO report on click."""
-        icon = self.unjoin_icons[slot_idx]
-        icon.matrix_basis = gizmo.billboarded_at(location, billboard_rot, scale=self.ICON_SCALE)
-        icon.hide = False
-        icon.color = self.LOCKED_COLOR if is_locked else self._default_unjoin_color
-        self.unjoin_op_props[slot_idx].element_a_guid = active_elem.GlobalId
-        self.unjoin_op_props[slot_idx].element_b_guid = partner_elem.GlobalId
-        icon.partner_obj = partner_obj
-
-
-class GizmoSlabUnjoinWalls(bpy.types.GizmoGroup, gizmo.BillboardingGizmoGroupMixin):
-    """Slab-side mirror of GizmoWallUnjoinSingle: when exactly one IfcSlab is
-    selected and at least one wall is clipped to its underside, surface an
-    unjoin icon at each connection point. The icons resolve at the same
-    world location as the wall-side gizmo (via the symmetric
-    tool.Wall.wall_slab_connection_location_world) so the same connection
-    has a single visual marker reachable from either selection.
-
-    Each visible icon dispatches bim.disconnect_elements with the slab +
-    wall GlobalIds, so a click removes the single rel under that icon and
-    re-clips the wall to whatever remaining slabs it's connected to."""
-
-    bl_idname = "OBJECT_GGT_bim_slab_unjoin_walls"
-    bl_label = "Slab Unjoin Walls Gizmo"
-    bl_space_type = "VIEW_3D"
-    bl_region_type = "WINDOW"
-    bl_options = {"3D", "PERSISTENT"}
-
-    POOL_SIZE = 16
-    ICON_SCALE = 0.35
-
-    @classmethod
-    def poll(cls, context: bpy.types.Context) -> bool:
-        return _slab_connection_gizmo_poll_gate(context, require_editing=True)
-
-    def setup(self, context: bpy.types.Context) -> None:
-        default_color, highlight_color = self.get_decoration_colors()
-        self.unjoin_icons = []
-        self.unjoin_op_props = []
-        for _ in range(self.POOL_SIZE):
-            icon = self.setup_icon_gizmo(
-                "VIEW3D_GT_wall_link_toggle", default_color, highlight_color, "bim.disconnect_elements"
-            )
-            icon.hide = True
-            self.unjoin_icons.append(icon)
-            self.unjoin_op_props.append(icon.target_set_operator("bim.disconnect_elements"))
-
-    def position_gizmos(self, context: bpy.types.Context) -> None:
-        for icon in self.unjoin_icons:
-            icon.hide = True
-
-        selected = list(tool.Blender.get_selected_objects())
-        if len(selected) != 1:
-            return
-        slab_obj = selected[0]
-        slab_elem = tool.Ifc.get_entity(slab_obj)
-        if slab_elem is None:
-            return
-
-        billboard_rot = gizmo.get_billboard_rotation(context)
-        clearance = gizmo.top_down_clearance(context, billboard_rot)
-        connections = list(tool.Wall.iter_slab_wall_connections(slab_elem))
-        if len(connections) > self.POOL_SIZE and not getattr(self, "_pool_cap_warned", False):
-            print(
-                f"[bonsai] GizmoSlabUnjoinWalls: slab has {len(connections)} wall connections; "
-                f"only the first {self.POOL_SIZE} unjoin gizmos are shown."
-            )
-            self._pool_cap_warned = True
-
-        slot_idx = 0
-        for wall_elem, _rel in connections:
-            if slot_idx >= self.POOL_SIZE:
-                break
-            wall_obj = tool.Ifc.get_object(wall_elem)
-            if wall_obj is None:
-                continue
-            location = tool.Wall.wall_slab_connection_location_world(wall_obj, slab_obj)
-            if location is None:
-                continue
             icon = self.unjoin_icons[slot_idx]
             icon.matrix_basis = gizmo.billboarded_at(location + clearance, billboard_rot, scale=self.ICON_SCALE)
             icon.hide = False
-            self.unjoin_op_props[slot_idx].element_a_guid = slab_elem.GlobalId
-            self.unjoin_op_props[slot_idx].element_b_guid = wall_elem.GlobalId
-            icon.partner_obj = wall_obj
-            slot_idx += 1
-
-
-class GizmoSlabEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
-    """Pen / validate / cancel triad for slab disconnect-access mode.
-
-    Polls on a single IfcSlab with at least one wall clipped to its underside.
-    Pen routes through the universal ``bim.enable_editing_parametric``
-    dispatcher; finish + cancel both clear ``is_editing`` (no IFC mutation —
-    the framework requires the triad to exist by name convention even for a
-    pure UI gate). ESC, the red-coloured cancel icon, mutual exclusion with
-    other active parametric edits, gizmo prefs gating — all handled by the
-    base class."""
-
-    bl_idname = "OBJECT_GGT_bim_slab_edition"
-    bl_label = "Slab Editing Gizmo"
-    bl_space_type = "VIEW_3D"
-    bl_region_type = "WINDOW"
-    bl_options = {"3D", "PERSISTENT"}
-
-    enable_editing_operator = "bim.enable_editing_slab"
-    finish_editing_operator = "bim.finish_editing_slab"
-    cancel_editing_operator = "bim.cancel_editing_slab"
-    cycle_type_operator = ""
-
-    props_getter = tool.Model.get_slab_props
-    gizmo_pref_name = "slab"
-
-    @classmethod
-    def is_element_type(cls, element: ifcopenshell.entity_instance) -> bool:
-        return tool.Parametric.is_slab(element) and any(tool.Wall.iter_slab_wall_connections(element))
-
-
-class GizmoPairDisconnect(bpy.types.GizmoGroup, gizmo.BillboardingGizmoGroupMixin):
-    """Surfaces a disconnect icon when exactly 2 IFC elements are selected
-    and they share a supported rel — currently the wall + slab pair joined
-    by an ``IfcRelConnectsElements(TOP)``. Click dispatches
-    ``bim.disconnect_elements`` with both GlobalIds. For wall-wall pairs,
-    ``GizmoWallJoinIntersection``'s unjoin icon already exposes the same
-    affordance via ``bim.unjoin_walls``."""
-
-    bl_idname = "OBJECT_GGT_bim_pair_disconnect"
-    bl_label = "Disconnect Pair Gizmo"
-    bl_space_type = "VIEW_3D"
-    bl_region_type = "WINDOW"
-    bl_options = {"3D", "PERSISTENT"}
-
-    ICON_SCALE = 0.35
-
-    @classmethod
-    def poll(cls, context: bpy.types.Context) -> bool:
-        selected = list(tool.Blender.get_selected_objects())
-        if len(selected) != 2:
-            return False
-        if tool.Blender.Modifier.any_selected_is_array_child():
-            return False
-        elem_a = tool.Ifc.get_entity(selected[0])
-        elem_b = tool.Ifc.get_entity(selected[1])
-        if elem_a is None or elem_b is None:
-            return False
-        rels = tool.Connection.find_rels(elem_a, elem_b)
-        return any(kind == "element-top" for _, kind in rels)
-
-    def setup(self, context: bpy.types.Context) -> None:
-        default_color, highlight_color = self.get_decoration_colors()
-        self.disconnect_icon = self.setup_icon_gizmo(
-            "VIEW3D_GT_wall_link_toggle", default_color, highlight_color, "bim.disconnect_elements"
-        )
-        self.disconnect_icon.hide = True
-        self.disconnect_op = self.disconnect_icon.target_set_operator("bim.disconnect_elements")
-
-    def position_gizmos(self, context: bpy.types.Context) -> None:
-        self.disconnect_icon.hide = True
-        pair = _resolve_active_partner_pair(context)
-        if pair is None:
-            return
-        active, partner_obj, active_elem, partner_elem = pair
-        # Helper expects wall + slab regardless of which the user marked active.
-        if active_elem.is_a("IfcWall"):
-            wall_obj, slab_obj = active, partner_obj
-        elif partner_elem.is_a("IfcWall"):
-            wall_obj, slab_obj = partner_obj, active
-        else:
-            return
-        location = tool.Wall.wall_slab_connection_location_world(wall_obj, slab_obj)
-        if location is None:
-            return
-        billboard_rot = gizmo.get_billboard_rotation(context)
-        clearance = gizmo.top_down_clearance(context, billboard_rot)
-        self.disconnect_icon.matrix_basis = gizmo.billboarded_at(
-            location + clearance, billboard_rot, scale=self.ICON_SCALE
-        )
-        self.disconnect_icon.hide = False
-        self.disconnect_op.element_a_guid = active_elem.GlobalId
-        self.disconnect_op.element_b_guid = partner_elem.GlobalId
-        self.disconnect_icon.partner_obj = partner_obj
+            # Only the partner-GlobalId property is rewritten per frame; the operator
+            # binding itself is the long-lived handle set up at setup() time. GlobalId
+            # (not Blender object name) keeps the binding stable across renames, file
+            # save/reload, and any sit-in-the-undo-stack interlude between dispatch
+            # and execute.
+            self.unjoin_op_props[slot_idx].other_wall_guid = other_elem.GlobalId
+            # Mirror the partner reference onto the icon itself so its draw()
+            # can outline the partner on hover without a Gizmo-side getter on
+            # the bound operator (the API exposes target_set_operator with
+            # no symmetric reader).
+            icon.partner_obj = other_obj
 
 
 class GizmoWallFilletPreview(bpy.types.GizmoGroup, gizmo.BillboardingGizmoGroupMixin):
@@ -4858,7 +4468,7 @@ class WallGizmoPreviewDecorator(tool.Blender.ViewportDecorator):
         ],
         color_rgb: tuple[float, float, float],
     ) -> None:
-        tool.Blender.draw_quads(context, quads, fill_color=(*color_rgb, self.QUAD_ALPHA))
+        _fill_quads_alpha(context, quads, color_rgb, self.QUAD_ALPHA)
 
     @staticmethod
     def _wall_floor_quad(mw: Matrix, x0: float, x1: float, y0: float, y1: float) -> tuple[

src/bonsai/bonsai/bim/module/model/workspace.py

@@ -963,11 +963,7 @@ class EditObjectUI:
 
     @classmethod
     def draw_regen_operations(cls, row, ui_context):
-        # ``AuthoringData.load`` flips ``is_loaded`` at entry as a recursion
-        # guard, so a partial load (any computation along the way raising)
-        # leaves the tail keys unset. ``.get()`` keeps the header draw alive
-        # until the underlying failure is investigated.
-        if AuthoringData.data.get("is_regenable_element"):
+        if AuthoringData.data["is_regenable_element"]:
             row = cls.layout.row(align=True) if ui_context != "TOOL_HEADER" else row
             add_layout_hotkey_operator(row, "Regen", "S_G", "Recalculate Element Geometry", ui_context)
 
@@ -1321,7 +1317,7 @@ class Hotkey(bpy.types.Operator, tool.Ifc.Operator):
                 bpy.ops.bim.recalculate_profile()
         elif self.active_class in ("IfcWindow", "IfcWindowStandardCase", "IfcDoor", "IfcDoorStandardCase"):
             bpy.ops.bim.recalculate_fill()
-        elif self.active_class in ("IfcSpace",):
+        elif self.active_class in ("IfcSpace"):
             bpy.ops.bim.generate_space()
 
     def hotkey_S_M(self):

src/bonsai/bonsai/bim/module/nest/decorator.py

@@ -20,6 +20,7 @@ import blf
 import bpy
 import gpu
 import ifcopenshell.util.element
+from bpy.types import SpaceView3D
 from bpy_extras import view3d_utils
 from gpu_extras.batch import batch_for_shader
 from mathutils import Vector
@@ -27,6 +28,12 @@ from mathutils import Vector
 import bonsai.tool as tool
 
 
+def transparent_color(color, alpha=0.1):
+    color = [i for i in color]
+    color[3] = alpha
+    return color
+
+
 def create_bounding_box(objs):
     # Initialize the bounding box coordinates
     min_x, min_y, min_z = float("inf"), float("inf"), float("inf")
@@ -72,8 +79,26 @@ def create_bounding_box(objs):
     return indices, edges
 
 
-class NestDecorator(tool.Blender.ViewportDecorator):
-    draw_method = "draw_nest"
+class NestDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_nest, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
 
     def dotted_line_shader(self):
         vert_out = gpu.types.GPUStageInterfaceInfo("my_interface")
@@ -129,6 +154,14 @@ class NestDecorator(tool.Blender.ViewportDecorator):
         shader.uniform_float("u_Scale", 25)
         batch.draw(shader)
 
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
+
     def draw_nest(self, context: bpy.types.Context) -> None:
         props = tool.Nest.get_nest_props()
         if props.in_nest_mode:
@@ -193,11 +226,35 @@ class NestDecorator(tool.Blender.ViewportDecorator):
             self.draw_custom_batch(line, decorator_color_unselected)
 
 
-class NestModeDecorator(tool.Blender.ViewportDecorator):
-    draw_methods = (
-        ("draw_nest_name", "POST_PIXEL"),
-        ("draw_nest_empty", "POST_VIEW"),
-    )
+class NestModeDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_nest_name, (context,), "WINDOW", "POST_PIXEL"))
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_nest_empty, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
 
     def draw_nest_name(self, context):
         if context.mode == "EDIT_MESH":

src/bonsai/bonsai/bim/module/patch/__init__.py

@@ -21,7 +21,6 @@ import bpy
 from . import operator, prop, ui
 
 classes = (
-    operator.AddIfcPatchPreset,
     operator.ExecuteIfcPatch,
     operator.ExtractSelectedElements,
     operator.RunMigratePatch,
@@ -29,7 +28,6 @@ classes = (
     operator.SelectIfcPatchOutput,
     operator.UpdateIfcPatchArguments,
     prop.BIMPatchProperties,
-    ui.BIM_MT_ifc_patch_presets,
     ui.BIM_PT_patch,
 )
 

src/bonsai/bonsai/bim/module/patch/operator.py

@@ -23,7 +23,6 @@ from typing import TYPE_CHECKING, cast
 import bpy
 import ifcopenshell
 import ifcpatch
-from bl_operators.presets import AddPresetBase
 from bpy_extras.io_utils import ExportHelper, ImportHelper
 
 import bonsai.bim.handler
@@ -78,27 +77,6 @@ class ExecuteIfcPatch(bpy.types.Operator):
             return False
         return True
 
-    def invoke(self, context, event):
-        # Migrating IFC4 → IFC2X3 is lossy (enum drops, IFC4-only classes
-        # become IfcBuildingElementProxy, tessellated meshes get rebuilt as
-        # IfcFacetedBrep). Confirm before running so the user knows.
-        if tool.Patch.migration_is_lossy_downgrade():
-            return context.window_manager.invoke_props_dialog(self, width=480)
-        return self.execute(context)
-
-    def draw(self, context):
-        layout = self.layout
-        layout.label(text="Downgrading to IFC2X3 is lossy.", icon="ERROR")
-        column = layout.column(align=True)
-        column.label(text="Geometry will be preserved as faithfully as possible:")
-        column.label(text="• IfcIndexedPolyCurve → IfcPolyline (arcs approximated by chords)")
-        column.label(text="• IfcPolygonalFaceSet / IfcTriangulatedFaceSet → IfcFacetedBrep")
-        column.separator()
-        column.label(text="The following information is lost:")
-        column.label(text="• IFC4-only classes (IfcLamp, IfcPipeSegment, …) → IfcBuildingElementProxy")
-        column.label(text="• PredefinedType enum values absent from IFC2X3 are dropped")
-        column.label(text="  (original class + enum saved as ObjectType, e.g. 'IfcLamp/COMPACTFLUORESCENT')")
-
     def execute(self, context):
         props = tool.Patch.get_patch_props()
         recipe_name = props.ifc_patch_recipes
@@ -246,38 +224,3 @@ class ExtractSelectedElements(bpy.types.Operator):
         query = tool.Search.get_query_for_selected_elements()
         props.ifc_patch_args_attr[0].string_value = query
         return {"FINISHED"}
-
-
-class AddIfcPatchPreset(AddPresetBase, bpy.types.Operator):
-    """Save / remove ifc-patch argument presets, scoped per recipe.
-
-    Presets live in the standard Blender preset directory under
-    ``bonsai/ifc_patch/<recipe>/`` so a preset created for ``ExtractElements``
-    does not pollute the preset list for ``Migrate``. Persistence across files
-    and sessions is inherited from Blender's preset system."""
-
-    bl_idname = "bim.add_ifc_patch_preset"
-    bl_label = "Add IFC Patch Preset"
-    preset_menu = "BIM_MT_ifc_patch_presets"
-    preset_defines = ["props = bpy.context.scene.BIMPatchProperties"]
-
-    @property
-    def preset_subdir(self) -> str:
-        return tool.Patch.get_preset_subdir()
-
-    @property
-    def preset_values(self) -> list[str]:
-        # `Attribute.get_value_name()` returns the storage field for the
-        # argument's data_type (string_value, bool_value, …). For file
-        # arguments it returns the wrapping PointerProperty (`filepath_value`)
-        # — the scalar path the preset needs is `.single_file` on that.
-        props = tool.Patch.get_patch_props()
-        values = []
-        for i, arg in enumerate(props.ifc_patch_args_attr):
-            field = arg.get_value_name()
-            if not field:
-                continue
-            if arg.data_type == "file":
-                field = f"{field}.single_file"
-            values.append(f"props.ifc_patch_args_attr[{i}].{field}")
-        return values

src/bonsai/bonsai/bim/module/patch/prop.py

@@ -71,15 +71,6 @@ def get_ifcpatch_recipes(self: "BIMPatchProperties", context: bpy.types.Context)
 
 def update_ifc_patch_recipe(self: "BIMPatchProperties", context: bpy.types.Context) -> None:
     bpy.ops.bim.update_ifc_patch_arguments(recipe=self.ifc_patch_recipes)
-    # Blender's script.execute_preset mutates the menu class's bl_label to
-    # the loaded preset's display name (used as a "currently selected"
-    # indicator). The label persists across recipe changes — making the new
-    # recipe's menu falsely show the previous recipe's preset name. Reset
-    # the label to the menu's canonical title so it always matches the
-    # active recipe's preset list.
-    menu_cls = getattr(bpy.types, "BIM_MT_ifc_patch_presets", None)
-    if menu_cls is not None:
-        menu_cls.bl_label = "IFC Patch Presets"
 
 
 class BIMPatchProperties(PropertyGroup):

src/bonsai/bonsai/bim/module/patch/ui.py

@@ -29,20 +29,6 @@ if TYPE_CHECKING:
     from bonsai.bim.prop import Attribute
 
 
-class BIM_MT_ifc_patch_presets(bpy.types.Menu):
-    """Lists ifc-patch presets for the currently selected recipe.
-
-    ``preset_subdir`` is resolved per draw so switching recipes swaps the
-    preset list without re-registering the menu."""
-
-    bl_label = "IFC Patch Presets"
-    preset_operator = "script.execute_preset"
-
-    def draw(self, context: bpy.types.Context) -> None:
-        self.preset_subdir = tool.Patch.get_preset_subdir()
-        bpy.types.Menu.draw_preset(self, context)
-
-
 class BIM_PT_patch(bpy.types.Panel):
     bl_label = "Patch"
     bl_idname = "BIM_PT_patch"
@@ -80,11 +66,6 @@ class BIM_PT_patch(bpy.types.Panel):
                 row.operator("bim.patch_query_from_selected", text="", icon="EYEDROPPER")
 
         if props.ifc_patch_args_attr:
-            preset_row = layout.row(heading="Preset", align=True)
-            preset_row.menu("BIM_MT_ifc_patch_presets", text=BIM_MT_ifc_patch_presets.bl_label)
-            preset_row.operator("bim.add_ifc_patch_preset", text="", icon="ADD")
-            preset_row.operator("bim.add_ifc_patch_preset", text="", icon="REMOVE").remove_active = True
-
             draw_callback = draw_callback_ if props.ifc_patch_recipes == "ExtractElements" else None
             draw_attributes(props.ifc_patch_args_attr, layout, callback=draw_callback)
 

src/bonsai/bonsai/bim/module/project/__init__.py

@@ -18,8 +18,6 @@
 
 import bpy
 
-import bonsai.tool as tool
-
 from . import decorator, gizmo, operator, prop, ui, workspace
 
 classes = (
@@ -32,9 +30,7 @@ classes = (
     operator.BIM_FH_import_ifc,
     operator.BIM_OT_apply_pending_opening_cuts,
     operator.BIM_OT_dismiss_multi_instance_warning,
-    operator.BIM_OT_dismiss_pending_array_repair,
     operator.BIM_OT_dismiss_pending_opening_cuts,
-    operator.BIM_OT_select_pending_array_repair,
     operator.BIM_OT_select_pending_opening_cuts,
     operator.BIM_OT_load_clipping_planes,
     operator.BIM_OT_save_clipping_planes,
@@ -60,8 +56,6 @@ classes = (
     operator.LinkIfc,
     operator.LoadBlendMetadataAndIFC,
     operator.LoadLink,
-    operator.AutosavePrompt,
-    operator.LoadAutosavedRecoveryPopup,
     operator.LoadLinkedProject,
     operator.LoadProject,
     operator.LoadProjectElements,
@@ -92,7 +86,6 @@ classes = (
     prop.FilterCategory,
     prop.Link,
     prop.EditedObj,
-    prop.PendingArrayRepair,
     prop.PendingOpeningRecut,
     prop.BIMProjectProperties,
     prop.MeasureToolSettings,
@@ -140,7 +133,6 @@ def register():
 def unregister():
     if not bpy.app.background:
         bpy.utils.unregister_tool(workspace.ExploreTool)
-    tool.Autosave.cancel_timer()
     del bpy.types.Scene.BIMProjectProperties
     del bpy.types.Scene.MeasureToolSettings
     bpy.app.handlers.load_post.remove(decorator.toggle_decorations_on_load)

src/bonsai/bonsai/bim/module/project/data.py

@@ -162,8 +162,8 @@ class ProjectLibraryData:
         library_file = IfcStore.library_file
         if library_file is None or library_file.schema == "IFC2X3":
             return results
-        root = tool.Project.get_root_context(library_file)
-        results.append((str(root.id()), f"{root.is_a()} {root.Name or 'Unnamed'}", root.Description or ""))
+        project = library_file.by_type("IfcProject")[0]
+        results.append((str(project.id()), f"IfcProject {project.Name or 'Unnamed'}", project.Description or ""))
         for library_id, data in cls.data["project_libraries"].items():
             results.append((str(library_id), data["Name"] or "Unnamed", data["Description"] or ""))
         return results

src/bonsai/bonsai/bim/module/project/decorator.py

@@ -42,6 +42,12 @@ def toggle_decorations_on_load(*args):
     # as queried object is linked from separate .blend file.
 
 
+def transparent_color(color, alpha=0.1):
+    color = [i for i in color]
+    color[3] = alpha
+    return color
+
+
 class ProjectDecorator:
     installed = None
 
@@ -74,6 +80,11 @@ class ProjectDecorator:
         unselected_elements_color = self.addon_prefs.decorator_color_unselected
         special_elements_color = self.addon_prefs.decorator_color_special
 
+        def transparent_color(color, alpha=0.1):
+            color = [i for i in color]
+            color[3] = alpha
+            return color
+
         gpu.state.point_size_set(6)
         gpu.state.blend_set("ALPHA")
 
@@ -99,9 +110,7 @@ class ProjectDecorator:
 
         if geom.selected_edges:
             self.draw_batch("LINES", selected_vertices, selected_elements_color, geom.selected_edges)
-            self.draw_batch(
-                "TRIS", selected_vertices, tool.Blender.transparent_color(selected_elements_color), geom.selected_tris
-            )
+            self.draw_batch("TRIS", selected_vertices, transparent_color(selected_elements_color), geom.selected_tris)
 
 
 class ClippingPlaneDecorator:
@@ -136,6 +145,11 @@ class ClippingPlaneDecorator:
         unselected_elements_color = self.addon_prefs.decorator_color_unselected
         special_elements_color = self.addon_prefs.decorator_color_special
 
+        def transparent_color(color, alpha=0.1):
+            color = [i for i in color]
+            color[3] = alpha
+            return color
+
         gpu.state.point_size_set(6)
         gpu.state.blend_set("ALPHA")
 
@@ -196,21 +210,37 @@ class ClippingPlaneDecorator:
 
             if unselected_edges:
                 self.draw_batch("LINES", unselected_vertices, special_elements_color, unselected_edges)
-                self.draw_batch(
-                    "TRIS", unselected_vertices, tool.Blender.transparent_color(special_elements_color), unselected_tris
-                )
+                self.draw_batch("TRIS", unselected_vertices, transparent_color(special_elements_color), unselected_tris)
             if selected_edges:
                 self.draw_batch("LINES", selected_vertices, selected_elements_color, selected_edges)
-                self.draw_batch(
-                    "TRIS", selected_vertices, tool.Blender.transparent_color(selected_elements_color), selected_tris
-                )
+                self.draw_batch("TRIS", selected_vertices, transparent_color(selected_elements_color), selected_tris)
 
 
-class MeasureDecorator(tool.Blender.ViewportDecorator):
-    draw_methods = (
-        ("draw_measurements_text", "POST_PIXEL"),
-        ("draw_measurements_poly", "POST_VIEW"),
-    )
+class MeasureDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(
+            SpaceView3D.draw_handler_add(handler.draw_measurements_text, (context,), "WINDOW", "POST_PIXEL")
+        )
+        cls.handlers.append(
+            SpaceView3D.draw_handler_add(handler.draw_measurements_poly, (context,), "WINDOW", "POST_VIEW")
+        )
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
 
     def draw_measurements_text(self, context):
         PolylineDecorator().select_and_draw_measurements_text(context)

src/bonsai/bonsai/bim/module/project/operator.py

@@ -281,9 +281,9 @@ class RefreshLibrary(bpy.types.Operator):
         elements = {e for e in elements if not tool.Project.is_element_assigned_to_project_library(e, rels)}
         self.props.add_library_project_library("Unassigned", len(elements), 0, False)
 
-        root_context = tool.Project.get_root_context(library_file)
+        ifc_project = library_file.by_type("IfcProject")[0]
         hierarchy = tool.Project.get_project_hierarchy(library_file)
-        tool.Project.load_project_libraries_to_ui(root_context, hierarchy)
+        tool.Project.load_project_libraries_to_ui(ifc_project, hierarchy)
         return {"FINISHED"}
 
 
@@ -763,10 +763,7 @@ class EditProjectLibrary(bpy.types.Operator):
         previous_parent_library = tool.Project.get_parent_library(project_library)
         new_parent_library = library_file.by_id(int(props.parent_library))
         if previous_parent_library != new_parent_library:
-            if previous_parent_library is None:
-                # Edited library was a root in a library-only file; nest it under the new parent.
-                ifcopenshell.api.nest.assign_object(library_file, [project_library], new_parent_library)
-            elif previous_parent_library.is_a("IfcProject"):
+            if previous_parent_library.is_a("IfcProject"):
                 # Then new one is IfcProjectLibrary.
                 ifcopenshell.api.nest.assign_object(library_file, [project_library], new_parent_library)
             else:  # Previous is IfcProjectLibrary.
@@ -807,12 +804,9 @@ class AddProjectLibrary(bpy.types.Operator):
         props = tool.Project.get_project_props()
         library_file = IfcStore.library_file
         assert library_file
-        root_context = tool.Project.get_root_context(library_file)
+        project = library_file.by_type("IfcProject")[0]
         project_library = ifcopenshell.api.root.create_entity(library_file, "IfcProjectLibrary")
-        if root_context.is_a("IfcProject"):
-            ifcopenshell.api.project.assign_declaration(library_file, [project_library], root_context)
-        else:
-            ifcopenshell.api.nest.assign_object(library_file, [project_library], root_context)
+        ifcopenshell.api.project.assign_declaration(library_file, [project_library], project)
         ProjectLibraryData.load()  # Update enum.
         props.selected_project_library = str(project_library.id())
         props.is_editing_project_library = True
@@ -985,10 +979,8 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
         ),
         default=False,
     )
-    skip_autosave_recovery: bpy.props.BoolProperty(default=False, options={"HIDDEN", "SKIP_SAVE"})
     use_detailed_tooltip: bpy.props.BoolProperty(default=False, options={"HIDDEN"})
     filename_ext = ".ifc"
-    skip_recent: bpy.props.BoolProperty(default=False, options={"HIDDEN", "SKIP_SAVE"})
 
     if TYPE_CHECKING:
         filepath: str
@@ -997,7 +989,6 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
         use_relative_path: bool
         should_start_fresh_session: bool
         import_without_ifc_data: bool
-        skip_autosave_recovery: bool
         use_detailed_tooltip: bool
 
     @classmethod
@@ -1044,33 +1035,7 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
 
         return tooltip
 
-    def check_autosave_recovery(self, context: bpy.types.Context) -> bool:
-        if self.skip_autosave_recovery:
-            return False
-        autosaved_filepath = tool.Autosave.get_newer_autosaved_path(self.get_filepath_abs())
-        if not autosaved_filepath:
-            return False
-        # Fire-and-forget: don't propagate this popup's own RUNNING_MODAL
-        # return value up as if *this* operator were running modally too -
-        # we never call modal_handler_add() on ourselves, so the window
-        # manager would be left tracking a modal operator with no handler,
-        # corrupting its operator bookkeeping until it crashes later when
-        # the (real) popup modal handler is closed.
-        bpy.ops.bim.load_autosaved_recovery_popup(
-            "INVOKE_DEFAULT",
-            original_filepath=str(self.get_filepath_abs()),
-            autosaved_filepath=autosaved_filepath,
-            is_advanced=self.is_advanced,
-            use_relative_path=self.use_relative_path,
-            should_start_fresh_session=self.should_start_fresh_session,
-            import_without_ifc_data=self.import_without_ifc_data,
-        )
-        return True
-
     def execute(self, context):
-        if self.check_autosave_recovery(context):
-            return {"FINISHED"}
-
         if (
             tool.Blender.get_addon_preferences().save_metadata_blend_file
             and self.should_start_fresh_session
@@ -1148,14 +1113,6 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
                     f"Error loading IFC file from filepath '{filepath}'. See logs above in the system console for the details.",
                 )
                 return {"CANCELLED"}
-            if not tool.Ifc.get().by_type("IfcProject"):
-                self.report(
-                    {"ERROR"},
-                    "This file contains no IfcProject. It is likely an IFC project library — "
-                    "load it via Project Setup → Project Library → Select Library File instead.",
-                )
-                IfcStore.purge()
-                return {"CANCELLED"}
             props = tool.Project.get_project_props()
             props.is_loading = True
             props.total_elements = len(tool.Ifc.get().by_type("IfcElement"))
@@ -1165,8 +1122,7 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
             props.should_save_metadata_for_this_file = metadata_doc is not None
 
             tool.Blender.register_toolbar()
-            if not self.skip_recent:
-                tool.Project.add_recent_ifc_project(self.get_filepath_abs())
+            tool.Project.add_recent_ifc_project(self.get_filepath_abs())
 
             if self.is_advanced:
                 pass
@@ -1179,13 +1135,10 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
         except:
             bonsai.last_error = traceback.format_exc()
             raise
-        tool.Autosave.reset_timer()
         return {"FINISHED"}
 
     def invoke(self, context, event):
         if self.filepath:
-            if self.check_autosave_recovery(context):
-                return {"FINISHED"}
             return self.execute(context)
         return ImportHelper.invoke(self, context, event)
 
@@ -1283,17 +1236,6 @@ class LoadProjectElements(bpy.types.Operator):
                 f"Apply manually from the Project panel.",
             )
 
-        props.pending_array_repair.clear()
-        if ifc_importer.broken_arrays:
-            for element in ifc_importer.broken_arrays:
-                item = props.pending_array_repair.add()
-                item.ifc_definition_id = element.id()
-            self.report(
-                {"WARNING"},
-                f"{len(ifc_importer.broken_arrays)} array parent(s) reference missing child GUIDs. "
-                f"Inspect from the Project panel.",
-            )
-
         tool.Project.load_default_thumbnails()
         tool.Project.set_default_context()
         tool.Project.set_default_modeling_dimensions()
@@ -1327,11 +1269,6 @@ class LoadProjectElements(bpy.types.Operator):
             if element.IsDecomposedBy:
                 for subelement in element.IsDecomposedBy[0].RelatedObjects:
                     decomposed_elements.add(subelement)
-            # IfcSurfaceFeature (e.g. road markings) adhere to a host element
-            # via IfcRelAdheresToElement, a [1:1] hierarchical relationship in
-            # the same family as aggregation, containment and nesting (IFC4.3).
-            for rel in getattr(element, "HasSurfaceFeatures", ()):
-                decomposed_elements.update(rel.RelatedSurfaceFeatures)
         if decomposed_elements:
             self.append_decomposed_elements(decomposed_elements)
         elements.update(decomposed_elements)
@@ -1460,7 +1397,6 @@ class LinkIfc(bpy.types.Operator, ImportHelper, tool.Ifc.Operator):
                 new.ifc_definition_id = reference.id()
             new.name = filepath
             new.filepath = filepath
-            new.query = self.query
             bpy.ops.bim.load_link(link_index=-1, use_cache=self.use_cache, query=self.query)
 
 
@@ -1531,10 +1467,6 @@ class LoadLink(bpy.types.Operator, tool.Ifc.Operator):
 
     def _execute(self, context):
         self.link = tool.Project.get_project_props().links[self.link_index]
-        # Fall back to the Link's stored query so callers that omit it
-        # still replay the filter the link was created with.
-        if not self.query and self.link.query:
-            self.query = self.link.query
         filepath = Path(tool.Ifc.resolve_uri(self.link.filepath))
         if not filepath.exists():
             self.report({"ERROR"}, f"File does not exist: '{filepath}'")
@@ -1702,36 +1634,13 @@ class ReloadLink(bpy.types.Operator):
     bl_description = "Reload the selected file"
 
     link_index: bpy.props.IntProperty(name="Link Index")
-    query: bpy.props.StringProperty(
-        name="Query",
-        description=(
-            "Custom selector query to use to load element from a linked model. E.g. 'IfcElement'.\n\n"
-            "Default query - IfcElement, but excluding IfcProxy, IfcSpatialStructureElement, IfcSpatialElement, IfcFeatureElement."
-        ),
-    )
 
     if TYPE_CHECKING:
         link_index: int
-        query: str
-
-    def invoke(self, context, event):
-        link = tool.Project.get_project_props().links[self.link_index]
-        self.query = link.query
-        return context.window_manager.invoke_props_dialog(self)
-
-    def draw(self, context):
-        assert self.layout
-        self.layout.prop(self, "query", placeholder="IfcElement")
 
     def execute(self, context):
-        link = tool.Project.get_project_props().links[self.link_index]
-        # An unset query means the operator was called without the dialog
-        # (e.g. from a script) - preserve the link's stored query instead
-        # of overwriting it with the empty default.
-        if self.properties.is_property_set("query"):
-            link.query = self.query
         bpy.ops.bim.unload_link(link_index=self.link_index)
-        return bpy.ops.bim.load_link(link_index=self.link_index, use_cache=False, query=link.query) or {"FINISHED"}
+        return bpy.ops.bim.load_link(link_index=self.link_index, use_cache=False) or {"FINISHED"}
 
 
 class ToggleLinkSelectability(bpy.types.Operator):
@@ -1980,7 +1889,6 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
     json_compact: bpy.props.BoolProperty(name="Export Compact IFCJSON", default=False)
     should_save_as: bpy.props.BoolProperty(name="Should Save As", default=False, options={"HIDDEN"})
     use_relative_path: bpy.props.BoolProperty(name="Use Relative Path", default=False)
-    skip_recent: bpy.props.BoolProperty(default=False, options={"HIDDEN", "SKIP_SAVE"})
 
     if TYPE_CHECKING:
         filter_glob: str
@@ -2041,18 +1949,6 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
         return {"FINISHED"}
 
     def _execute(self, context):
-        project_props = tool.Project.get_project_props()
-        project_props.use_relative_project_path = self.use_relative_path
-
-        # Fallback if filepath is not set
-        if not getattr(self, "filepath", None) or self.filepath.strip() in ("", ".ifc"):
-            props = tool.Blender.get_bim_props()
-            if props.ifc_file:
-                self.filepath = str(tool.Blender.ensure_blender_path_is_abs(Path(props.ifc_file)))
-            else:
-                self.report({"ERROR"}, "No filepath available for saving.")
-                return {"CANCELLED"}
-
         committed, failed_commits = tool.Parametric.commit_pending_edits()
         # Previews are session-transient — discard rather than commit. Sibling
         # gizmo polls gate on each preview's is_active flag, and a stuck flag
@@ -2115,8 +2011,7 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
         settings.logger.info("Export finished in {:.2f} seconds".format(time.time() - start))
         print("Export finished in {:.2f} seconds".format(time.time() - start))
         # New project created in Bonsai should be in recent projects too.
-        if not self.skip_recent:
-            tool.Project.add_recent_ifc_project(Path(output_file))
+        tool.Project.add_recent_ifc_project(Path(output_file))
         props = tool.Project.get_project_props()
         if props.use_relative_project_path and bpy.data.is_saved:
             output_file = os.path.relpath(output_file, bpy.path.abspath("//"))
@@ -2150,7 +2045,6 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
             )
 
         bonsai.bim.handler.refresh_ui_data()
-        tool.Autosave.reset_timer()
 
     @classmethod
     def description(cls, context, properties):
@@ -2159,123 +2053,6 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
         return "Save the IFC file.  Will save both .IFC/.BLEND files if synced together"
 
 
-class LoadAutosavedRecoveryPopup(bpy.types.Operator):
-    bl_idname = "bim.load_autosaved_recovery_popup"
-    bl_label = "Recover Autosaved File"
-    bl_options = {"REGISTER", "UNDO"}
-
-    original_filepath: bpy.props.StringProperty(options={"SKIP_SAVE"})
-    autosaved_filepath: bpy.props.StringProperty(options={"SKIP_SAVE"})
-    is_advanced: bpy.props.BoolProperty(default=False, options={"SKIP_SAVE"})
-    use_relative_path: bpy.props.BoolProperty(default=False, options={"SKIP_SAVE"})
-    should_start_fresh_session: bpy.props.BoolProperty(default=True, options={"SKIP_SAVE"})
-    import_without_ifc_data: bpy.props.BoolProperty(default=False, options={"SKIP_SAVE"})
-
-    def draw(self, context):
-        layout = self.layout
-        layout.label(text="A newer autosaved copy was found:", icon="INFO")
-        layout.label(text=os.path.basename(self.autosaved_filepath))
-        layout.separator()
-        layout.label(text="Do you want to load the autosaved version instead?")
-        layout.label(text="(Cancel will load the original)")
-
-    def invoke(self, context, event):
-        # invoke_props_dialog is modal - unlike invoke_popup/popup_menu, it
-        # isn't dismissed by the mouse simply leaving its bounds. It always
-        # renders both a fixed "Cancel" button and this confirm_text one, so
-        # the question is framed as Yes/Cancel rather than adding separate
-        # Load buttons on top.
-        return context.window_manager.invoke_props_dialog(
-            self, width=420, title="Recover Autosaved File", confirm_text="Yes"
-        )
-
-    def _load_kwargs(self, filepath: str, skip_recent: bool) -> dict:
-        return dict(
-            filepath=filepath,
-            skip_autosave_recovery=True,  # Prevent infinite loop
-            is_advanced=self.is_advanced,
-            use_relative_path=self.use_relative_path,
-            should_start_fresh_session=self.should_start_fresh_session,
-            import_without_ifc_data=self.import_without_ifc_data,
-            skip_recent=skip_recent,
-        )
-
-    @staticmethod
-    def _defer(callback) -> None:
-        def on_timer() -> None:
-            callback()
-            return None
-
-        # bim.load_project (with should_start_fresh_session, our default)
-        # calls wm.read_homefile(), which tears down the window
-        # manager/screens/regions. Calling that synchronously from this
-        # dialog's execute()/cancel() - themselves invoked from deep inside
-        # Blender's modal handling for this popup's button click - frees
-        # data that the still-on-stack caller dereferences once we return,
-        # segfaulting Blender. Deferring by one timer tick runs the reload
-        # after the popup's own modal handling has fully unwound. The
-        # callback only closes over plain values (not `self`), since the
-        # operator instance itself may no longer be valid by the time the
-        # timer fires.
-        bpy.app.timers.register(on_timer, first_interval=0.0)
-
-    def execute(self, context):
-        kwargs = self._load_kwargs(self.autosaved_filepath, skip_recent=True)
-        original_filepath = self.original_filepath
-
-        def load_and_repoint() -> None:
-            bpy.ops.bim.load_project(**kwargs)
-            # Re-point tracking at the original path so future saves write
-            # back to it, not "_autosaved.ifc".
-            tool.Ifc.set_path(original_filepath)
-
-        self._defer(load_and_repoint)
-        return {"FINISHED"}
-
-    def cancel(self, context):
-        # Also reached via Escape or a click outside the dialog, not just Cancel.
-        kwargs = self._load_kwargs(self.original_filepath, skip_recent=False)
-        self._defer(lambda: bpy.ops.bim.load_project(**kwargs))
-
-
-class AutosavePrompt(bpy.types.Operator):
-    bl_idname = "bim.autosave_prompt"
-    bl_label = "Autosave Reminder"
-    bl_options = set()
-
-    def invoke(self, context, event):
-        return context.window_manager.invoke_props_dialog(
-            self, width=400, confirm_text="Save", title="Autosave Reminder"
-        )
-
-    def draw(self, context):
-        layout = self.layout
-        layout.label(text="The autosave timer has expired.", icon="INFO")
-        layout.label(text="Would you like to save your IFC project now?")
-
-    def execute(self, context):
-        # Get current IFC path
-        props = tool.Blender.get_bim_props()
-        current_ifc_path = props.ifc_file
-
-        if not current_ifc_path:
-            self.report({"WARNING"}, "No IFC file path set. Please save manually.")
-            tool.Autosave.reset_timer()
-            return {"CANCELLED"}
-
-        # Call save_project with explicit filepath using EXEC_DEFAULT
-        result = bpy.ops.bim.save_project(
-            "EXEC_DEFAULT", filepath=current_ifc_path, should_save_as=False, skip_recent=True
-        )
-
-        tool.Autosave.reset_timer()
-        return result
-
-    def cancel(self, context):
-        tool.Autosave.reset_timer()
-        return {"CANCELLED"}
-
-
 class LoadLinkedProject(bpy.types.Operator, ImportHelper):
     bl_idname = "bim.load_linked_project"
     bl_label = "Load Project For Viewing Only"
@@ -3762,44 +3539,3 @@ class BIM_OT_select_pending_opening_cuts(bpy.types.Operator):
         tool.Blender.set_objects_selection(context, active_object=objects[0], selected_objects=objects)
         self.report({"INFO"}, f"Selected {len(objects)} element(s).")
         return {"FINISHED"}
-
-
-class BIM_OT_select_pending_array_repair(bpy.types.Operator):
-    bl_idname = "bim.select_pending_array_repair"
-    bl_label = "Select Array Parents With Missing Children"
-    bl_description = "Select the Blender objects of array parents whose BBIM_Array.Data references children that don't resolve in the file."
-    bl_options = {"REGISTER", "UNDO"}
-
-    def execute(self, context: bpy.types.Context) -> set[str]:
-        ifc_file = tool.Ifc.get()
-        if ifc_file is None:
-            self.report({"INFO"}, "No IFC file loaded.")
-            return {"CANCELLED"}
-        objects: list[bpy.types.Object] = []
-        for item in tool.Project.get_project_props().pending_array_repair:
-            try:
-                element = ifc_file.by_id(item.ifc_definition_id)
-            except RuntimeError:
-                continue
-            obj = tool.Ifc.get_object(element)
-            if obj is not None:
-                objects.append(obj)
-        if not objects:
-            self.report({"INFO"}, "No matching Blender objects found for the pending list.")
-            return {"CANCELLED"}
-        tool.Blender.set_objects_selection(context, active_object=objects[0], selected_objects=objects)
-        self.report({"INFO"}, f"Selected {len(objects)} array parent(s).")
-        return {"FINISHED"}
-
-
-class BIM_OT_dismiss_pending_array_repair(bpy.types.Operator):
-    bl_idname = "bim.dismiss_pending_array_repair"
-    bl_label = "Dismiss Pending Array Repair"
-    bl_description = (
-        "Clear the pending array-repair list without acting on it. The underlying BBIM_Array.Data stays unchanged."
-    )
-    bl_options = {"REGISTER", "UNDO"}
-
-    def execute(self, context: bpy.types.Context) -> set[str]:
-        tool.Project.get_project_props().pending_array_repair.clear()
-        return {"FINISHED"}

src/bonsai/bonsai/bim/module/project/prop.py

@@ -98,8 +98,7 @@ def is_editing_project_library_update(self: "BIMProjectProperties", context: bpy
         project_library = library_file.by_id(int(self.selected_project_library))
         self.project_library_attributes.clear()
         bonsai.bim.helper.import_attributes(project_library, self.project_library_attributes)
-        if parent_library := tool.Project.get_parent_library(project_library):
-            self.parent_library = str(parent_library.id())
+        self.parent_library = str(tool.Project.get_parent_library(project_library).id())
         ProjectLibraryData.load()  # Show edit icon in enum.
         return
 
@@ -260,11 +259,6 @@ class Link(PropertyGroup):
         description="STEP ID of the IfcDocumentReference when linked to a parent IFC project. Zero when no parent IFC exists",
         default=0,
     )
-    query: StringProperty(
-        name="Query",
-        description="Selector query used to filter elements when loading the linked model",
-        default="",
-    )
 
     if TYPE_CHECKING:
         name: str
@@ -280,7 +274,6 @@ class Link(PropertyGroup):
         include_in_drawings: bool
         empty_handle: Union[bpy.types.Object, None]
         ifc_definition_id: int
-        query: str
 
 
 class EditedObj(PropertyGroup):
@@ -313,17 +306,6 @@ class PendingOpeningRecut(PropertyGroup):
         ifc_definition_id: int
 
 
-class PendingArrayRepair(PropertyGroup):
-    """One array parent whose ``BBIM_Array.Data`` references at least one
-    child GUID that does not resolve in the current IFC file. The user can
-    select these parents from the Project panel banner to inspect them."""
-
-    ifc_definition_id: IntProperty(name="IFC Definition ID")
-
-    if TYPE_CHECKING:
-        ifc_definition_id: int
-
-
 class BIMProjectProperties(PropertyGroup):
     is_editing: BoolProperty(name="Is Editing", default=False)
     is_loading: BoolProperty(name="Is Loading", default=False)
@@ -390,7 +372,6 @@ class BIMProjectProperties(PropertyGroup):
         description="Maxium number of openings that object can have. If object has more openings, it will be loaded without openings",
     )
     pending_opening_recut: CollectionProperty(name="Pending Opening Recut", type=PendingOpeningRecut)
-    pending_array_repair: CollectionProperty(name="Pending Array Repair", type=PendingArrayRepair)
     style_limit: IntProperty(
         name="Style Limit",
         default=300,
@@ -557,7 +538,6 @@ class BIMProjectProperties(PropertyGroup):
         angular_tolerance: float
         void_limit: int
         pending_opening_recut: bpy.types.bpy_prop_collection_idprop[PendingOpeningRecut]
-        pending_array_repair: bpy.types.bpy_prop_collection_idprop[PendingArrayRepair]
         style_limit: int
         distance_limit: float
         false_origin_mode: Literal["AUTOMATIC", "MANUAL", "DISABLED"]

src/bonsai/bonsai/bim/module/project/ui.py

@@ -28,8 +28,9 @@ from bpy.types import Menu, Panel, UIList
 import bonsai.bim
 import bonsai.tool as tool
 from bonsai.bim.helper import draw_attributes, prop_with_search
-from bonsai.bim.ifc import IfcStore
+from bonsai.bim.ifc import IfcStore, is_cache_locked_by_other_process
 from bonsai.bim.module.project.data import LinksData, ProjectData
+from bonsai.bim.ui import draw_multiline_text
 
 if TYPE_CHECKING:
     from bonsai.bim.module.project.prop import (
@@ -166,6 +167,20 @@ class BIM_PT_project(Panel):
         if pprops.is_loading:
             self.draw_advanced_loading_ui(context)
         elif self.file or props.ifc_file:
+            if is_cache_locked_by_other_process():
+                box = self.layout.box()
+                box.alert = True
+                row = box.row(align=True)
+                row.label(text="IFC Already Open in Another Blender Instance", icon="ERROR")
+                row.operator("bim.dismiss_multi_instance_warning", text="", icon="CANCEL")
+                draw_multiline_text(
+                    box.column(align=True),
+                    "This file is open in another Blender instance. Editing the same "
+                    "IFC from two instances at once can lose your work or display "
+                    "outdated geometry. Close the other Blender instances to continue safely.",
+                    context=context,
+                )
+
             if props.has_blend_warning:
                 box = self.layout.box()
                 box.alert = True
@@ -175,6 +190,21 @@ class BIM_PT_project(Panel):
                 op.uri = "https://docs.bonsaibim.org/guides/troubleshooting.html#saving-and-loading-blend-files"
                 row.operator("bim.close_blend_warning", text="", icon="CANCEL")
 
+            if pending := pprops.pending_opening_recut:
+                box = self.layout.box()
+                box.alert = True
+                box.label(text="Opening Cuts Skipped", icon="ERROR")
+                draw_multiline_text(
+                    box.column(align=True),
+                    f"{len(pending)} element(s) had too many openings to cut during load. "
+                    f"Apply to recompute their meshes, or dismiss to leave them as they are.",
+                    context=context,
+                )
+                row = box.row(align=True)
+                row.operator("bim.select_pending_opening_cuts", text="Select Elements", icon="RESTRICT_SELECT_OFF")
+                row.operator("bim.apply_pending_opening_cuts", text="Apply Openings", icon="PLAY")
+                row.operator("bim.dismiss_pending_opening_cuts", text="", icon="CANCEL")
+
             if props.ifc_file:
                 self.draw_loaded_project_ui(context)
             else:

src/bonsai/bonsai/bim/module/spatial/decorator.py

@@ -18,17 +18,43 @@
 
 import blf
 import gpu
+from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
+from gpu_extras.batch import batch_for_shader
 from mathutils import Vector
 
 import bonsai.tool as tool
 
 
-class GridDecorator(tool.Blender.ViewportDecorator):
-    draw_methods = (
-        ("draw_text", "POST_PIXEL"),
-        ("draw", "POST_VIEW"),
-    )
+class GridDecorator:
+    is_installed = False
+    handlers = []
+
+    @classmethod
+    def install(cls, context):
+        if cls.is_installed:
+            cls.uninstall()
+        handler = cls()
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_text, (context,), "WINDOW", "POST_PIXEL"))
+        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw, (context,), "WINDOW", "POST_VIEW"))
+        cls.is_installed = True
+
+    @classmethod
+    def uninstall(cls):
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
+    def draw_batch(self, shader_type, content_pos, color, indices=None):
+        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
+            return
+        shader = self.line_shader if shader_type == "LINES" else self.shader
+        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+        shader.uniform_float("color", color)
+        batch.draw(shader)
 
     def draw_text(self, context):
         if not tool.Blender.is_addon_enabled():

src/bonsai/bonsai/bim/module/structural/decorator.py

@@ -31,17 +31,11 @@ import bonsai.tool as tool
 from bonsai.bim.module.structural.load_decoration_data import ShaderInfo
 
 
-class LoadsDecorator(tool.Blender.ViewportDecorator):
+class LoadsDecorator:
     """Decorator to show structural loads in 3D"""
 
-    # draw_methods exists to satisfy ViewportDecorator.__init_subclass__'s
-    # method-existence check; the override install below is what actually
-    # registers handlers (the POST_VIEW binding passes no context arg, which
-    # the base's generic install cannot express).
-    draw_methods = (
-        ("draw_load_values", "POST_PIXEL"),
-        ("__call__", "POST_VIEW"),
-    )
+    is_installed = False
+    handlers = []
     decoration_data = None
     text_info = []
     shader_info = []
@@ -60,6 +54,15 @@ class LoadsDecorator(tool.Blender.ViewportDecorator):
         cls.update()
         cls.is_installed = True
 
+    @classmethod
+    def uninstall(cls) -> None:
+        for handler in cls.handlers:
+            try:
+                SpaceView3D.draw_handler_remove(handler, "WINDOW")
+            except ValueError:
+                pass
+        cls.is_installed = False
+
     @classmethod
     def update(cls) -> None:
         cls.decoration_data.update()

src/bonsai/bonsai/bim/module/style/operator.py

@@ -744,7 +744,7 @@ class EnableEditingSurfaceStyle(bpy.types.Operator):
         if self.ifc_class == "IfcSurfaceStyleLighting":
 
             def callback(attribute_name: str, _: object, data: dict[str, Any]) -> None:
-                assert attributes is not None
+                assert attributes
                 color = attributes.add()
                 assert isinstance(color, ColourRgb)
                 color.name = attribute_name
@@ -782,40 +782,34 @@ class EditSurfaceStyle(bpy.types.Operator, tool.Ifc.Operator):
     def _execute(self, context):
         self.props = tool.Style.get_style_props()
         self.style = tool.Ifc.get().by_id(self.props.is_editing_style)
-        prev_update_graph = self.props.update_graph
-        self.props["update_graph"] = False
 
-        try:
-            style_elements = tool.Style.get_style_elements(self.style)
+        style_elements = tool.Style.get_style_elements(self.style)
+        # NOTE: currently this operator is used to edit existing (and only existing) IfcSurfaceStyles
+        # or new or existing IfcSurfaceStyle components (shading, etc)
+        # which is kind of confusing.
+        if self.props.is_editing_class == "IfcSurfaceStyle":
+            self.surface_style = self.style
+        else:
+            self.surface_style = style_elements.get(self.props.is_editing_class, None)
+            self.shading_style = style_elements.get("IfcSurfaceStyleShading", None)
+            self.rendering_style = style_elements.get("IfcSurfaceStyleRendering", None)
+            self.texture_style = style_elements.get("IfcSurfaceStyleWithTextures", None)
 
-            # NOTE: currently this operator is used to edit existing (and only existing) IfcSurfaceStyles
-            # or new or existing IfcSurfaceStyle components (shading, etc)
-            # which is kind of confusing.
-            if self.props.is_editing_class == "IfcSurfaceStyle":
-                self.surface_style = self.style
-            else:
-                self.surface_style = style_elements.get(self.props.is_editing_class, None)
-                self.shading_style = style_elements.get("IfcSurfaceStyleShading", None)
-                self.rendering_style = style_elements.get("IfcSurfaceStyleRendering", None)
-                self.texture_style = style_elements.get("IfcSurfaceStyleWithTextures", None)
+        if self.surface_style:
+            result = self.edit_existing_style()
+        else:
+            result = self.add_new_style()
 
-            if self.surface_style:
-                result = self.edit_existing_style()
-            else:
-                result = self.add_new_style()
+        if result:
+            return result
 
-            if result:
-                return result
+        tool.Style.disable_editing()
+        core.load_styles(tool.Style, style_type=self.props.style_type)
 
-            tool.Style.disable_editing()
-            core.load_styles(tool.Style, style_type=self.props.style_type)
-
-            # restore selected style type
-            material = tool.Ifc.get_object(self.style)
-            msprops = tool.Style.get_material_style_props(material)
-            msprops.active_style_type = msprops.active_style_type
-        finally:
-            self.props["update_graph"] = prev_update_graph
+        # restore selected style type
+        material = tool.Ifc.get_object(self.style)
+        msprops = tool.Style.get_material_style_props(material)
+        msprops.active_style_type = msprops.active_style_type
 
     def edit_existing_style(self) -> None:
         ifc_file = tool.Ifc.get()
@@ -1237,5 +1231,4 @@ class RemoveSurfaceStyle(bpy.types.Operator, tool.Ifc.Operator):
         surface_style = tool.Style.get_style_elements(style)[props.is_editing_class]
         ifcopenshell.api.style.remove_surface_style(ifc_file, surface_style)
         core.disable_editing_style(tool.Style)
-        core.load_styles(tool.Style, style_type=props.style_type)
         return {"FINISHED"}

src/bonsai/bonsai/bim/module/style/prop.py

@@ -185,13 +185,6 @@ class ColourRgb(PropertyGroup):
     # to fit blender.bim.helper.draw_attribute
     is_optional = False
     special_type = ""
-    data_type = ""
-    ifc_class = ""
-    use_explorer_ui = False
-
-    @property
-    def display_name(self):
-        return self.name
 
     def get_value_name(self, *args, **kwargs):
         return "color_value"

src/bonsai/bonsai/bim/module/style/ui.py

@@ -176,30 +176,8 @@ class BIM_PT_styles(Panel):
         row.prop(self.props, "reflectance_method")
 
         if self.props.reflectance_method not in ("PHYSICAL", "NOTDEFINED", "FLAT"):
-            self.layout.label(
-                text=f"{self.props.reflectance_method} will be skipped: only PHYSICAL / NOTDEFINED / FLAT are supported",
-                icon="ERROR",
-            )
-        elif self.props.reflectance_method in ("PHYSICAL", "NOTDEFINED"):
-            if self.props.specular_colour_class == "IfcColourRgb":
-                self.layout.label(
-                    text="Metallic color is IFC-only in PHYSICAL/NOTDEFINED and does not affect Blender appearance",
-                    icon="ERROR",
-                )
-        elif self.props.reflectance_method == "FLAT":
-            if self.props.diffuse_colour_class == "IfcNormalisedRatioMeasure":
-                self.layout.label(
-                    text="Emissive ratio is IFC-only in FLAT Reflectance method and does not affect Blender appearance",
-                    icon="ERROR",
-                )
-            self.layout.label(
-                text="Specular value is IFC-only in FLAT Reflectance method and does not affect Blender appearance",
-                icon="ERROR",
-            )
-            self.layout.label(
-                text="Highlight value is IFC-only in FLAT Reflectance method and does not affect Blender appearance",
-                icon="ERROR",
-            )
+            self.layout.label(text="Supported reflectance methods are:")
+            self.layout.label(text="PHYSICAL / NOTDEFINED / FLAT")
 
         row = self.layout.row(align=True)
         row.label(text="Emissive" if self.props.reflectance_method == "FLAT" else "Diffuse")
@@ -254,8 +232,6 @@ class BIM_PT_styles(Panel):
         row.operator("bim.add_surface_texture", text="", icon="ADD")
         if textures:
             self.layout.prop(self.props, "uv_mode")
-            if self.props.uv_mode in ("Generated", "Camera"):
-                self.layout.label(text="Not available in SOLID Mode", icon="INFO")
 
         for i, texture in enumerate(textures):
             split = self.layout.split(factor=0.30, align=True)
@@ -268,22 +244,6 @@ class BIM_PT_styles(Panel):
             op_clear = row.operator("bim.remove_texture_map", text="", icon="X")
             op_path.texture_map_index = op_clear.texture_map_index = i
 
-            reflectance = self.props.reflectance_method
-            mode = texture.mode
-            if reflectance == "FLAT":
-                if mode != "EMISSIVE":
-                    self.layout.label(
-                        text=f"{mode} will be skipped: only EMISSIVE is supported for Render Reflectance FLAT",
-                        icon="ERROR",
-                    )
-            elif reflectance in ("PHYSICAL", "NOTDEFINED"):
-                _SUPPORTED = {"DIFFUSE", "NORMAL", "METALLICROUGHNESS", "EMISSIVE", "OCCLUSION"}
-                if mode not in _SUPPORTED:
-                    self.layout.label(
-                        text=f"{mode} will be skipped: not supported for Render Reflectance PHYSICAL/NOTDEFINED",
-                        icon="ERROR",
-                    )
-
     def draw_externally_defined_surface_style(self):
         row = self.layout.row()
         op = row.operator("bim.browse_external_style", icon="APPEND_BLEND", text="Append From Blend File")
@@ -292,17 +252,10 @@ class BIM_PT_styles(Panel):
         bonsai.bim.helper.draw_attributes(self.props.external_style_attributes, self.layout, enable_search=True)
 
     def draw_refraction_surface_style(self):
-        self.layout.label(
-            text="Refraction values are IFC-only and do not affect Blender surface appearance",
-            icon="ERROR",
-        )
         bonsai.bim.helper.draw_attributes(self.props.refraction_style_attributes, self.layout, enable_search=True)
+        row = self.layout.row(align=True)
 
     def draw_lighting_surface_style(self):
-        self.layout.label(
-            text="Lighting values are IFC-only and do not affect Blender surface appearance",
-            icon="ERROR",
-        )
         bonsai.bim.helper.draw_attributes(self.props.lighting_style_colours, self.layout)
 
     def draw_edit_ui(self, edit_label: str):

src/bonsai/bonsai/bim/module/system/decorator.py

@@ -31,6 +31,12 @@ ERROR_ELEMENTS_COLOR = (1, 0.2, 0.322, 1)  # RED
 UNSPECIAL_ELEMENT_COLOR = (0.2, 0.2, 0.2, 1)  # GREY
 
 
+def transparent_color(color, alpha=0.1):
+    color = [i for i in color]
+    color[3] = alpha
+    return color
+
+
 @persistent
 def toggle_decorations_on_load(*args):
     props = tool.System.get_system_props()
@@ -74,7 +80,7 @@ class SystemDecorator:
 
     def draw_faces(self, bm, vertices_coords):
         """Submit a non-mutating beauty-triangulated TRIS batch over ``bm``'s faces."""
-        faces_color = tool.Blender.transparent_color(self.addon_prefs.decorator_color_special)
+        faces_color = transparent_color(self.addon_prefs.decorator_color_special)
         tool.Blender.draw_bmesh_face_tris(bm, vertices_coords, faces_color, self.draw_batch)
 
     def __call__(self, context, get_custom_bmesh=None, draw_faces=False, exit_edit_mode_callback=None):
@@ -122,15 +128,13 @@ class SystemDecorator:
         self.shader = gpu.shader.from_builtin("UNIFORM_COLOR")
         self.shader.bind()
 
-        self.draw_batch(
-            "LINES", all_vertices, tool.Blender.transparent_color(unselected_elements_color), unselected_edges
-        )
+        self.draw_batch("LINES", all_vertices, transparent_color(unselected_elements_color), unselected_edges)
         self.draw_batch("LINES", all_vertices, selected_elements_color, selected_edges)
         self.draw_batch("LINES", all_vertices, UNSPECIAL_ELEMENT_COLOR, arc_edges)
         self.draw_batch("LINES", all_vertices, special_elements_color, preview_edges)
         self.draw_batch("LINES", all_vertices, special_elements_color, roof_angle_edges)
 
-        self.draw_batch("POINTS", unselected_vertices, tool.Blender.transparent_color(unselected_elements_color, 0.5))
+        self.draw_batch("POINTS", unselected_vertices, transparent_color(unselected_elements_color, 0.5))
         self.draw_batch("POINTS", error_vertices, ERROR_ELEMENTS_COLOR)
         self.draw_batch("POINTS", special_vertices, special_elements_color)
         self.draw_batch("POINTS", selected_vertices, selected_elements_color)

src/bonsai/bonsai/bim/module/type/operator.py

@@ -65,28 +65,10 @@ class AssignType(bpy.types.Operator, tool.Ifc.Operator):
             if active_drawing:
                 active_target_view = tool.Drawing.get_drawing_target_view(active_drawing)
 
-        compatible: list[tuple[bpy.types.Object, ifcopenshell.entity_instance]] = []
-        skipped_classes: set[str] = set()
         for obj in related_objects:
             element = tool.Ifc.get_entity(obj)
             if not element or not element.is_a("IfcObject"):
                 continue
-            if not tool.Type.is_relating_type_compatible(element, relating_type):
-                skipped_classes.add(element.is_a())
-                continue
-            compatible.append((obj, element))
-
-        if skipped_classes:
-            self.report(
-                {"WARNING"},
-                f"Skipped {', '.join(sorted(skipped_classes))}: not a valid occurrence for " f"{relating_type.is_a()}.",
-            )
-
-        if not compatible:
-            self.report({"ERROR"}, f"No selected object can be typed by {relating_type.is_a()}.")
-            return {"CANCELLED"}
-
-        for obj, element in compatible:
             core.assign_type(tool.Ifc, tool.Model, tool.Type, element=element, type=relating_type)
 
             # Switch to the drawing's target view if available
@@ -394,22 +376,12 @@ class DuplicateType(bpy.types.Operator, tool.Ifc.Operator):
         if self.assign_selected_objects:
             selected_objects = tool.Blender.get_selected_objects()
             prefs = tool.Blender.get_addon_preferences()
-            skipped_classes: set[str] = set()
             for selected_obj in selected_objects:
                 selected_element = tool.Ifc.get_entity(selected_obj)
-                if not selected_element or not selected_element.is_a("IfcObject"):
-                    continue
-                if not tool.Type.is_relating_type_compatible(selected_element, new):
-                    skipped_classes.add(selected_element.is_a())
-                    continue
-                core.assign_type(tool.Ifc, tool.Model, tool.Type, element=selected_element, type=new)
-                if prefs.occurrence_name_style == "TYPE":
-                    selected_obj.name = tool.Model.generate_occurrence_name(new, selected_element.is_a())
-            if skipped_classes:
-                self.report(
-                    {"WARNING"},
-                    f"Skipped {', '.join(sorted(skipped_classes))}: not a valid occurrence for " f"{new.is_a()}.",
-                )
+                if selected_element and selected_element.is_a("IfcObject"):
+                    core.assign_type(tool.Ifc, tool.Model, tool.Type, element=selected_element, type=new)
+                    if prefs.occurrence_name_style == "TYPE":
+                        selected_obj.name = tool.Model.generate_occurrence_name(new, selected_element.is_a())
 
         if obj in context.selectable_objects:
             tool.Blender.select_and_activate_single_object(context, new_obj)

src/bonsai/bonsai/bim/module/void/operator.py

@@ -26,7 +26,7 @@ import bonsai.bim.handler
 import bonsai.core.geometry
 import bonsai.core.root
 import bonsai.tool as tool
-from bonsai.bim.module.model.opening import FilledOpeningGenerator, is_filling_supported
+from bonsai.bim.module.model.opening import FilledOpeningGenerator
 
 
 class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
@@ -34,13 +34,11 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
     bl_label = "Apply Opening"
     bl_options = {"REGISTER", "UNDO"}
     bl_description = (
-        "Cuts openings in a wall, slab, or roof using selected shape objects — "
-        "doors, windows, existing openings, or plain (non-IFC) meshes. "
-        "Selection order doesn't matter.\n\n"
-        "Doors and windows also fill the opening. Other IFC classes are currently "
-        "unsupported by the opening generator and get skipped with a warning.\n\n"
-        "Shift+click: keep each opening at its shape object's current position "
-        "instead of snapping to the wall."
+        "Apply opening objects to an Element.\n\n"
+        "The Element and the openings to be applied should be selected. The order of selection is not important.\n"
+        "Opening can be just a Blender mesh object.\n\n"
+        "Shift+click: keep the filling at its current matrix_world — skip the wall-axis snap "
+        "and the rl1/rl2 Z-elevation default that the regular click applies."
     )
 
     # Toggled by ``invoke`` when the user holds SHIFT during a gizmo / hotkey
@@ -61,12 +59,6 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
         return self.execute(context)
 
     def _execute(self, context):
-        # Multi-opening drops on the same host fan out N update_representation
-        # writes + N switch_representation recuts without batching. Coalesce.
-        with tool.Geometry.batch_host_recut():
-            return self._add_openings(context)
-
-    def _add_openings(self, context):
         selected_objects = context.selected_objects
         target_object = selected_objects[0]
 
@@ -86,14 +78,8 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
                     self.report({"INFO"}, "You can't add an opening to another opening.")
                     continue
                 elif not element1.is_a("IfcOpeningElement") and not element2.is_a("IfcOpeningElement"):
-                    if is_filling_supported(element1):  # Add a fill to an element.
+                    if element1.is_a("IfcWindow") or element1.is_a("IfcDoor"):  # Add a fill to an element.
                         obj1, obj2 = obj2, obj1
-                    elif not is_filling_supported(element2):
-                        self.report(
-                            {"INFO"},
-                            f"Cannot apply {element2.is_a()} as an opening — Bonsai currently supports only IfcDoor and IfcWindow as parametric fillings.",
-                        )
-                        continue
                     FilledOpeningGenerator().generate(
                         obj2,
                         obj1,
@@ -179,7 +165,7 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
                             voided_obj.scale = (1.0, 1.0, 1.0)
                             tool.Ifc.finish_edit(voided_obj)
                         else:
-                            tool.Geometry.update_host_representation(voided_obj)
+                            bpy.ops.bim.update_representation(obj=voided_obj.name)
 
                     if tool.Ifc.is_moved(voided_obj):
                         bonsai.core.geometry.edit_object_placement(
@@ -188,7 +174,12 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
 
                     representation = tool.Geometry.get_active_representation(voided_obj)
                     assert representation
-                    tool.Geometry.recut_host(voided_obj, representation)
+                    bonsai.core.geometry.switch_representation(
+                        tool.Ifc,
+                        tool.Geometry,
+                        obj=voided_obj,
+                        representation=representation,
+                    )
                 tool.Geometry.lock_scale(voided_obj)
 
             if not has_visible_openings:
@@ -226,7 +217,12 @@ class RemoveOpening(bpy.types.Operator, tool.Ifc.Operator):
             if building_obj and building_obj.data:
                 representation = tool.Geometry.get_active_representation(building_obj)
                 assert representation
-                tool.Geometry.recut_host(building_obj, representation)
+                bonsai.core.geometry.switch_representation(
+                    tool.Ifc,
+                    tool.Geometry,
+                    obj=building_obj,
+                    representation=representation,
+                )
         tool.Geometry.unlock_scale_object_with_openings(obj)
         tool.Geometry.clear_cache(element)
         return {"FINISHED"}

src/bonsai/bonsai/bim/ui.py

@@ -39,10 +39,21 @@ from natsort import natsorted
 import bonsai.bim
 import bonsai.bim.helper
 import bonsai.tool as tool
-from bonsai.bim.ifc import is_cache_locked_by_other_process
 from bonsai.bim.module.bsdd.prop import BIMBSDDProperties, BSDDProperty
-from bonsai.bim.module.model import prop as _model_prop
-from bonsai.bim.module.model import ui as _model_ui
+from bonsai.bim.module.model.prop import (
+    BIMDoorProperties,
+    BIMRailingProperties,
+    BIMRoofProperties,
+    BIMStairProperties,
+    BIMWindowProperties,
+)
+from bonsai.bim.module.model.ui import (
+    draw_door_properties,
+    draw_railing_properties,
+    draw_roof_properties,
+    draw_stair_properties,
+    draw_window_properties,
+)
 from bonsai.bim.module.pset.prop import IfcProperty
 from bonsai.bim.prop import Attribute
 
@@ -267,29 +278,34 @@ class BIM_UL_panel_visibilities(bpy.types.UIList):
 class GizmoPreferences(bpy.types.PropertyGroup):
     """Aggregator for parametric gizmo visibility settings. One flat bool per
     parametric feature; controls whether that feature's gizmo group polls
-    visible in the viewport.
-
-    The per-feature ``<name>: BoolProperty`` fields are derived from
-    ``tool.Parametric.EDIT_TYPES`` at module load — adding a new parametric
-    type to the registry automatically surfaces its toggle here, with no
-    parallel hand-maintained list to keep in sync."""
+    visible in the viewport."""
 
     draw_gizmos_in_3d_viewport: BoolProperty(
         name="Draw Gizmos In 3D Viewport",
         default=True,
         description="Show interactive gizmos in the 3D viewport for parametric elements",
     )
+    door: BoolProperty(name="Door", default=True)
+    window: BoolProperty(name="Window", default=True)
+    stair: BoolProperty(name="Stair", default=True)
+    railing: BoolProperty(name="Railing", default=True)
+    roof: BoolProperty(name="Roof", default=True)
+    array: BoolProperty(name="Array", default=True)
+    pipe_segment: BoolProperty(name="Pipe Segment", default=True)
+    duct_segment: BoolProperty(name="Duct Segment", default=True)
+    wall: BoolProperty(name="Wall", default=True)
 
     if TYPE_CHECKING:
         draw_gizmos_in_3d_viewport: bool
-
-
-for _gizmo_pref_entry in tool.Parametric.EDIT_TYPES:
-    GizmoPreferences.__annotations__[_gizmo_pref_entry.name] = BoolProperty(
-        name=_gizmo_pref_entry.name.replace("_", " ").title(),
-        default=True,
-    )
-del _gizmo_pref_entry
+        door: bool
+        window: bool
+        stair: bool
+        railing: bool
+        roof: bool
+        array: bool
+        pipe_segment: bool
+        duct_segment: bool
+        wall: bool
 
 
 class DocPreferences(bpy.types.PropertyGroup):
@@ -385,22 +401,11 @@ class DocPreferences(bpy.types.PropertyGroup):
 
 
 class DefaultParameters(bpy.types.PropertyGroup):
-    """Per-type preset values used to seed new parametric instances.
-
-    The ``<name>: PointerProperty`` fields are derived from the subset of
-    ``tool.Parametric.EDIT_TYPES`` flagged ``has_default_parameters=True``,
-    each pointing at the matching ``BIM<Name>Properties`` class. Adding a
-    new entry with that flag automatically surfaces a preferences section
-    and gives the create operator a preset to copy from."""
-
-
-for _default_params_entry in tool.Parametric.EDIT_TYPES:
-    if not _default_params_entry.has_default_parameters:
-        continue
-    DefaultParameters.__annotations__[_default_params_entry.name] = bpy.props.PointerProperty(
-        type=getattr(_model_prop, _default_params_entry.props_attr),
-    )
-del _default_params_entry
+    door: bpy.props.PointerProperty(type=BIMDoorProperties)
+    window: bpy.props.PointerProperty(type=BIMWindowProperties)
+    railing: bpy.props.PointerProperty(type=BIMRailingProperties)
+    roof: bpy.props.PointerProperty(type=BIMRoofProperties)
+    stair: bpy.props.PointerProperty(type=BIMStairProperties)
 
 
 class BIM_ADDON_preferences(bpy.types.AddonPreferences):
@@ -512,15 +517,6 @@ class BIM_ADDON_preferences(bpy.types.AddonPreferences):
         size=4,
         description="Color of not selected verts/edges (used in profile editing mode)",
     )
-    clip_box_cap_color: bpy.props.FloatVectorProperty(
-        name="Clip Box Caps Color",
-        subtype="COLOR",
-        default=(0.0, 0.0, 0.0, 1.0),
-        min=0.0,
-        max=1.0,
-        size=4,
-        description="Fill color of clip-box cross-section caps",
-    )
     decorator_color_special: bpy.props.FloatVectorProperty(
         name="Special Elements Color",
         subtype="COLOR",
@@ -577,43 +573,6 @@ class BIM_ADDON_preferences(bpy.types.AddonPreferences):
     should_disable_undo_on_save: BoolProperty(
         name="Disable Undo When Saving (Faster saves, no undo for you!)", default=False
     )
-
-    def update_autosave_settings(self, context: bpy.types.Context) -> None:
-        if self.autosave_enabled:
-            tool.Autosave.reset_timer()
-        else:
-            tool.Autosave.cancel_timer()
-
-    autosave_enabled: BoolProperty(
-        name="Enable IFC Autosave Timer",
-        description="Periodically remind you to save or automatically create a backup copy of the IFC file",
-        default=False,
-        update=update_autosave_settings,
-    )
-    autosave_interval_minutes: bpy.props.IntProperty(
-        name="Autosave Interval (Minutes)",
-        description="Time between autosave reminders or backups. The timer resets whenever you open or save a project",
-        default=10,
-        min=1,
-        max=1440,
-        update=update_autosave_settings,
-    )
-    autosave_mode: bpy.props.EnumProperty(
-        name="Autosave Mode",
-        items=[
-            (
-                "PROMPT",
-                "Prompt to Save",
-                "Show a dialog offering to save the IFC project when the timer expires",
-            ),
-            (
-                "BACKUP",
-                "Automatic Backup",
-                "Save a backup copy as filename_autosaved.ifc when the timer expires",
-            ),
-        ],
-        default="PROMPT",
-    )
     should_stream: BoolProperty(name="Stream Data From IFC-SPF (Only for advanced users)", default=False)
     should_always_cache: BoolProperty(
         name="Always Cache Geometry",
@@ -726,9 +685,6 @@ class BIM_ADDON_preferences(bpy.types.AddonPreferences):
         bsdd_load_test_dictionaries: bool
         bsdd_baseurl: str
         should_disable_undo_on_save: bool
-        autosave_enabled: bool
-        autosave_interval_minutes: int
-        autosave_mode: Literal["PROMPT", "BACKUP"]
         should_stream: bool
         should_always_cache: bool
         occurrence_name_style: Literal["CLASS", "TYPE", "CUSTOM"]
@@ -850,39 +806,43 @@ class BIM_ADDON_preferences(bpy.types.AddonPreferences):
         layout.row().prop(self, "decorator_color_special")
         layout.row().prop(self, "decorator_color_error")
         layout.row().prop(self, "decorator_color_background")
-        bonsai.bim.helper.draw_expandable_panel(
-            layout,
-            context,
-            "Clip Box",
-            self.draw_clip_box_colors,
-        )
-
-    def draw_clip_box_colors(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
-        layout.row().prop(self, "clip_box_cap_color")
 
     def draw_default_parameters(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
         box = layout.box()
-        for entry in tool.Parametric.EDIT_TYPES:
-            if not entry.has_default_parameters:
-                continue
-            props = getattr(self.default_parameters, entry.name)
-            draw_props = getattr(_model_ui, f"draw_{entry.name}_properties")
-            bonsai.bim.helper.draw_expandable_panel(
-                box,
-                context,
-                entry.name.replace("_", " ").title(),
-                lambda _layout, _context, _draw=draw_props, _props=props: _draw(_layout, _props),
-            )
+        bonsai.bim.helper.draw_expandable_panel(
+            box,
+            context,
+            "Door",
+            lambda _layout, _context: draw_door_properties(_layout, self.default_parameters.door),
+        )
+        bonsai.bim.helper.draw_expandable_panel(
+            box,
+            context,
+            "Window",
+            lambda _layout, _context: draw_window_properties(_layout, self.default_parameters.window),
+        )
+        bonsai.bim.helper.draw_expandable_panel(
+            box,
+            context,
+            "Railing",
+            lambda _layout, _context: draw_railing_properties(_layout, self.default_parameters.railing),
+        )
+        bonsai.bim.helper.draw_expandable_panel(
+            box,
+            context,
+            "Roof",
+            lambda _layout, _context: draw_roof_properties(_layout, self.default_parameters.roof),
+        )
+        bonsai.bim.helper.draw_expandable_panel(
+            box,
+            context,
+            "Stair",
+            lambda _layout, _context: draw_stair_properties(_layout, self.default_parameters.stair),
+        )
 
     def draw_other_settings(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
         layout.prop(self, "opening_focus_opacity")
         layout.prop(self, "should_disable_undo_on_save")
-        layout.separator()
-        layout.label(text="Autosave:")
-        layout.prop(self, "autosave_enabled")
-        if self.autosave_enabled:
-            layout.prop(self, "autosave_interval_minutes")
-            layout.prop(self, "autosave_mode")
         layout.prop(self, "should_stream")
         layout.prop(self, "should_always_cache")
         layout.label(text="bSDD:")
@@ -996,50 +956,6 @@ class BIM_PT_tabs(Panel):
             op.uri = "https://docs.bonsaibim.org/guides/troubleshooting.html#saving-and-loading-blend-files"
             row.operator("bim.close_blend_warning", text="", icon="CANCEL")
 
-        if is_cache_locked_by_other_process():
-            box = self.layout.box()
-            box.alert = True
-            row = box.row(align=True)
-            row.label(text="IFC Already Open in Another Blender Instance", icon="ERROR")
-            row.operator("bim.dismiss_multi_instance_warning", text="", icon="CANCEL")
-            draw_multiline_text(
-                box.column(align=True),
-                "This file is open in another Blender instance. Editing the same "
-                "IFC from two instances at once can lose your work or display "
-                "outdated geometry. Close the other Blender instances to continue safely.",
-                context=context,
-            )
-
-        pprops = tool.Project.get_project_props()
-        if pending := pprops.pending_opening_recut:
-            box = self.layout.box()
-            box.alert = True
-            box.label(text="Opening Cuts Skipped", icon="ERROR")
-            draw_multiline_text(
-                box.column(align=True),
-                f"{len(pending)} element(s) had too many openings to cut during load. "
-                f"Apply to recompute their meshes, or dismiss to leave them as they are.",
-                context=context,
-            )
-            row = box.row(align=True)
-            row.operator("bim.select_pending_opening_cuts", text="Select Elements", icon="RESTRICT_SELECT_OFF")
-            row.operator("bim.apply_pending_opening_cuts", text="Apply Openings", icon="PLAY")
-            row.operator("bim.dismiss_pending_opening_cuts", text="", icon="CANCEL")
-
-        if pending := pprops.pending_array_repair:
-            box = self.layout.box()
-            box.alert = True
-            box.label(text="Arrays With Missing Children", icon="ERROR")
-            draw_multiline_text(
-                box.column(align=True),
-                f"{len(pending)} array parent(s) reference child GUIDs that don't exist in this file. "
-                f"The arrays loaded incomplete. Select to inspect, or dismiss.",
-                context=context,
-            )
-            row = box.row(align=True)
-            row.operator("bim.select_pending_array_repair", text="Select Elements", icon="RESTRICT_SELECT_OFF")
-            row.operator("bim.dismiss_pending_array_repair", text="", icon="CANCEL")
-
         gprops = tool.Geometry.get_geometry_props()
         # Check that Blender mode and IFC Mode do match.
         if context.mode == "OBJECT" and gprops.mode in ("OBJECT", "ITEM"):
@@ -1991,7 +1907,6 @@ class BIM_PT_decorators_overlay(Panel):
         aggregate_props = tool.Aggregate.get_aggregate_props()
         nest_props = tool.Nest.get_nest_props()
         model_props = tool.Model.get_model_props()
-        system_props = tool.System.get_system_props()
         display_all = overlay.show_overlays
 
         col = layout.column()
@@ -2009,20 +1924,10 @@ class BIM_PT_decorators_overlay(Panel):
         row = col.row(align=True)
         row.prop(model_props, "show_slab_direction", text="Slab Direction")
         row = col.row(align=True)
-        row.prop(model_props, "show_paths", text="Element Paths")
-        row.prop(system_props, "should_draw_decorations", text="System Decorations")
-        row = col.row(align=True)
         row.prop(model_props, "show_bounding_box", text="Bounding Box Dimensions")
         row = col.row(align=True)
         row.prop(model_props, "show_cut_decorator", text="Cut Decorator")
         row.prop(model_props, "show_cut_decorator_fill", text="Fill Cut Decorator")
-        clip_box_props = tool.ClipBox.get_scene_props(context.scene)
-        row = col.row(align=True)
-        # Grey out the toggles when there is no clip box to act on, so the
-        # user can see the controls but can't flip a switch that does nothing.
-        row.enabled = bool(clip_box_props.clip_boxes)
-        row.prop(clip_box_props, "enabled", text="Enable Clipping")
-        row.prop(clip_box_props, "show_caps", text="Show Caps")
 
 
 class BIM_PT_snappping(Panel):

src/bonsai/bonsai/core/connection.py

@@ -1,113 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-"""Shared post-disconnect cleanup dispatch.
-
-Used by both ``bim.disconnect_elements`` (explicit user disconnect) and the
-connection cascade in ``tool.Geometry.delete_ifc_object`` (implicit
-disconnect-on-delete). Each kind returned by
-:py:meth:`bonsai.tool.connection.Connection.find_rels` /
-:py:meth:`find_rels_for_element` maps to a single arm here, so adding a new
-kind means extending one dispatch table — both call sites benefit
-automatically and the AST forward-compat guard enforces coverage.
-
-The ``subject`` parameter is the entity whose teardown effects the
-disconnect: for ``"path"`` / ``"element"`` / ``"element-top"`` kinds it
-carries an ``IfcRel*`` relationship entity (the rel that gets removed);
-for ``"mep-pair-fitting"`` it carries an ``IfcFlowFitting`` (the fitting
-that gets deleted). The slot is uniform on intent — the dispatch decides
-the teardown mechanism by kind.
-"""
-
-from __future__ import annotations
-
-from typing import TYPE_CHECKING
-
-import bonsai.core.geometry
-from bonsai.core.model import regenerate_wall_to_underside
-
-if TYPE_CHECKING:
-    import ifcopenshell
-
-    import bonsai.tool as tool
-
-
-def disconnect_rel(
-    ifc: type[tool.Ifc],
-    geometry: type[tool.Geometry],
-    model: type[tool.Model],
-    connection: type[tool.Connection],
-    subject: ifcopenshell.entity_instance,
-    kind: str,
-    elem: ifcopenshell.entity_instance,
-    partner: ifcopenshell.entity_instance,
-    skip_elem_recreate: bool = False,
-    skip_partner_recreate: bool = False,
-) -> None:
-    """Run the post-disconnect cleanup for one connection.
-
-    ``elem`` and ``partner`` are the two endpoints. The ``skip_*_recreate``
-    flags suppress per-side regenerate / recreate work — used by the
-    cascade-on-delete to avoid re-extruding entities that are about to be
-    removed by ``remove_product``. For the disconnect operator (where neither
-    endpoint is being deleted), both flags stay False and the full cleanup
-    runs on both sides.
-    """
-    if kind == "path":
-        bonsai.core.geometry.remove_connection(geometry, connection=subject)
-        if not skip_elem_recreate:
-            elem_obj = ifc.get_object(elem)
-            if elem_obj is not None:
-                model.recreate_wall(elem, elem_obj)
-        if not skip_partner_recreate:
-            partner_obj = ifc.get_object(partner)
-            if partner_obj is not None:
-                model.recreate_wall(partner, partner_obj)
-    elif kind == "element-top":
-        wall, _slab = connection.orient_element_top(subject, elem, partner)
-        ifc.run(
-            "geometry.disconnect_element",
-            relating_element=subject.RelatingElement,
-            related_element=subject.RelatedElement,
-        )
-        # Skip the wall-side regenerate when the wall is itself being deleted —
-        # either it's the elem of this cascade pass, or it's the partner that
-        # was queued earlier in the same batch.
-        if (wall is elem and skip_elem_recreate) or (wall is partner and skip_partner_recreate):
-            return
-        wall_obj = ifc.get_object(wall)
-        if wall_obj is not None:
-            regenerate_wall_to_underside(ifc, geometry, model, [wall_obj])
-    elif kind == "element":
-        ifc.run(
-            "geometry.disconnect_element",
-            relating_element=subject.RelatingElement,
-            related_element=subject.RelatedElement,
-        )
-    elif kind == "mep-pair-fitting":
-        if skip_elem_recreate and subject is elem:
-            return
-        if skip_partner_recreate and subject is partner:
-            return
-        fitting_obj = ifc.get_object(subject)
-        if fitting_obj is not None:
-            geometry.delete_ifc_object(fitting_obj)
-    else:
-        raise ValueError(f"Unknown kind: {kind!r}")

src/bonsai/bonsai/core/drawing.py

@@ -302,25 +302,9 @@ def add_drawing(
         context=drawing.get_body_context(),
         ifc_representation_class=None,
     )
-
-    drawings_parent_group = None
-    for group in ifc.get().by_type("IfcGroup"):
-        if group.Name == "DRAWINGS" and group.ObjectType == "DRAWINGS":
-            drawings_parent_group = group
-            break
-
-    if not drawings_parent_group:
-        drawings_parent_group = ifc.run("group.add_group")
-        ifc.run(
-            "group.edit_group", group=drawings_parent_group, attributes={"Name": "DRAWINGS", "ObjectType": "DRAWINGS"}
-        )
-
     group = ifc.run("group.add_group")
     ifc.run("group.edit_group", group=group, attributes={"Name": drawing_name, "ObjectType": "DRAWING"})
     ifc.run("group.assign_group", group=group, products=[element])
-
-    ifc.run("group.assign_group", group=drawings_parent_group, products=[group])
-
     collector.assign(camera)
     pset = ifc.run("pset.add_pset", product=element, name="EPset_Drawing")
     if drawing.get_unit_system() == "METRIC":
@@ -351,22 +335,7 @@ def add_drawing(
         },
     )
     drawing.setup_shading_styles_path(shading_styles_path)
-
-    drawings_parent_document = None
-    for document in ifc.get().by_type("IfcDocumentInformation"):
-        if document.Name == "DRAWINGS" and document.Scope == "DRAWINGS":
-            drawings_parent_document = document
-            break
-
-    if not drawings_parent_document:
-        drawings_parent_document = ifc.run("document.add_information")
-        if ifc.get_schema() == "IFC2X3":
-            attributes = {"DocumentId": "DRAWINGS", "Name": "DRAWINGS", "Scope": "DRAWINGS"}
-        else:
-            attributes = {"Identification": "DRAWINGS", "Name": "DRAWINGS", "Scope": "DRAWINGS"}
-        ifc.run("document.edit_information", information=drawings_parent_document, attributes=attributes)
-
-    information = ifc.run("document.add_information", parent=drawings_parent_document)
+    information = ifc.run("document.add_information")
     uri = drawing.get_default_drawing_path(drawing_name)
     reference = ifc.run("document.add_reference", information=information)
     if ifc.get_schema() == "IFC2X3":
@@ -394,23 +363,9 @@ def duplicate_drawing(
     drawing_tool.set_name(new_drawing, drawing_name)
     group = drawing_tool.get_drawing_group(new_drawing)
     ifc.run("group.unassign_group", group=group, products=[new_drawing])
-
-    drawings_parent_group = None
-    for parent_group in ifc.get().by_type("IfcGroup"):
-        if parent_group.Name == "DRAWINGS" and parent_group.ObjectType == "DRAWINGS":
-            drawings_parent_group = parent_group
-            break
-
-    if not drawings_parent_group:
-        drawings_parent_group = ifc.run("group.add_group")
-        ifc.run(
-            "group.edit_group", group=drawings_parent_group, attributes={"Name": "DRAWINGS", "ObjectType": "DRAWINGS"}
-        )
-
     new_group = ifc.run("group.add_group")
     ifc.run("group.edit_group", group=new_group, attributes={"Name": drawing_name, "ObjectType": "DRAWING"})
     ifc.run("group.assign_group", group=new_group, products=[new_drawing])
-    ifc.run("group.assign_group", group=drawings_parent_group, products=[new_group])
     if should_duplicate_annotations:
         new_annotations: list[ifcopenshell.entity_instance] = []
         annotation_objs = [ifc.get_object(a) for a in drawing_tool.get_group_elements(group) if a != drawing]
@@ -426,21 +381,7 @@ def duplicate_drawing(
     old_reference = drawing_tool.get_drawing_document(new_drawing)
     ifc.run("document.unassign_document", products=[new_drawing], document=old_reference)
 
-    drawings_parent_document = None
-    for document in ifc.get().by_type("IfcDocumentInformation"):
-        if document.Name == "DRAWINGS" and document.Scope == "DRAWINGS":
-            drawings_parent_document = document
-            break
-
-    if not drawings_parent_document:
-        drawings_parent_document = ifc.run("document.add_information")
-        if ifc.get_schema() == "IFC2X3":
-            attributes = {"DocumentId": "DRAWINGS", "Name": "DRAWINGS", "Scope": "DRAWINGS"}
-        else:
-            attributes = {"Identification": "DRAWINGS", "Name": "DRAWINGS", "Scope": "DRAWINGS"}
-        ifc.run("document.edit_information", information=drawings_parent_document, attributes=attributes)
-
-    information = ifc.run("document.add_information", parent=drawings_parent_document)
+    information = ifc.run("document.add_information")
     uri = drawing_tool.get_default_drawing_path(drawing_name)
     reference = ifc.run("document.add_reference", information=information)
     if ifc.get_schema() == "IFC2X3":

src/bonsai/bonsai/core/model.py

@@ -167,22 +167,12 @@ def regenerate_wall_to_underside(
     model: type[tool.Model],
     wall_objs: list[bpy.types.Object],
 ) -> None:
-    """Re-clip walls to their connected underside objects after the slab has moved.
-
-    When a wall has no remaining slab connections — the case reached after the
-    last TOP rel is severed (via disconnect or via cascade-on-slab-delete) — the
-    stale trim booleans are cleaned up so the wall reverts to its pre-clip
-    extrusion instead of holding orphan ``IfcBooleanResult`` items and a dead
-    ``BBIM_Boolean`` pset.
-    """
+    """Re-clip walls to their connected underside objects after the slab has moved."""
     clipped_objs = []
-    reverted_objs = []
     for obj in wall_objs:
         wall = ifc.get_entity(obj)
         slab_objs = model.get_connected_slab_objs(wall)
         if not slab_objs:
-            model.remove_wall_to_underside_booleans(wall)
-            reverted_objs.append(obj)
             continue
         if ifc.is_moved(obj):
             geometry.run_edit_object_placement(obj=obj)
@@ -195,9 +185,8 @@ def regenerate_wall_to_underside(
             if clip:
                 model.clip_wall_to_slab(wall, clip)
         clipped_objs.append(obj)
-    refresh_objs = clipped_objs + reverted_objs
-    if refresh_objs:
-        model.reload_body_representation(refresh_objs)
+    if clipped_objs:
+        model.reload_body_representation(clipped_objs)
 
 
 def extend_wall_to_slab(

src/bonsai/bonsai/core/product.py

@@ -50,15 +50,14 @@ def copy_z_rotation_to_selected(
     flip: bool = False,
 ) -> int:
     """Apply ``active``'s Z-Euler rotation to each target."""
-    source_z = surveyor.get_z_rotation(active)  # ty: ignore[missing-argument]
+    source_z = surveyor.get_z_rotation(active)
     if flip:
         source_z += math.pi
     rotated = 0
     for obj in targets:
-        target_z = surveyor.get_z_rotation(obj)  # ty: ignore[missing-argument]
-        if abs(_z_rotation_diff(target_z, source_z)) < Z_ROTATION_ALIGNMENT_TOLERANCE:
+        if abs(_z_rotation_diff(surveyor.get_z_rotation(obj), source_z)) < Z_ROTATION_ALIGNMENT_TOLERANCE:
             continue
-        surveyor.set_z_rotation(obj, source_z)  # ty: ignore[missing-argument]
+        surveyor.set_z_rotation(obj, source_z)
         rotated += 1
         if ifc.get_entity(obj) is not None:
             bonsai.core.geometry.edit_object_placement(ifc, geometry, surveyor, obj=obj)

src/bonsai/bonsai/core/tool.py

@@ -195,14 +195,6 @@ class Collector:
     def assign(cls, obj, should_clean_users_collection=False): pass
 
 
-@interface
-class Connection:
-    def find_rel(cls, elem_a, elem_b): pass
-    def find_rels(cls, elem_a, elem_b): pass
-    def find_rels_for_element(cls, elem): pass
-    def orient_element_top(cls, rel, elem_a, elem_b): pass
-
-
 @interface
 class Context:
     def clear_context(cls): pass
@@ -254,6 +246,7 @@ class Cost:
     def get_cost_schedule(cls, cost_schedule): pass
     def get_cost_value_attributes(cls): pass
     def get_cost_value_unit_component(cls): pass
+    def get_direct_cost_item_products(cls): pass
     def get_highlighted_cost_item(cls): pass
     def get_products(cls, related_object_type): pass
     def get_schedule_cost_items(cls, cost_schedule): pass
@@ -701,13 +694,11 @@ class Model:
     def load_openings(cls, openings): pass
     def purge_scene_openings(cls): pass
     def recalculate_walls(cls, objs): pass
-    def recreate_wall(cls, element, obj): pass
     def regenerate_array(cls, parent, data): pass
     def regenerate_profile(cls, obj): pass
     def regenerate_slab(cls, obj): pass
     def reload_body_representation(cls, obj_or_objects): pass
     def remove_wall_to_underside_booleans(cls, wall): pass
-    def strip_underside_booleans(cls, wall): pass
     def replace_object_ifc_representation(cls, ifc_file, ifc_context, obj, new_representation): pass
 
 
@@ -803,7 +794,7 @@ class Profile:
 
 @interface
 class Parametric:
-    def get_geom_generation(cls): pass
+    def get_geom_generation(cls) -> int: pass
     def refresh_post_commit(cls, operator) -> None: pass
 
 
@@ -1207,7 +1198,6 @@ class Type:
     def get_representation_context(cls, representation): pass
     def get_type_occurrences(cls, element_type): pass
     def has_material_usage(cls, element): pass
-    def is_relating_type_compatible(cls, occurrence, relating_type): pass
     def record_material_usage_attributes(cls, element): pass
     def restore_material_usage_attributes(cls, element, usage_attributes): pass
     def run_geometry_add_representation(cls, obj=None, context=None, ifc_representation_class=None, profile_set_usage=None): pass

src/bonsai/bonsai/tool/__init__.py

@@ -30,9 +30,7 @@ from bonsai.tool.bsdd import Bsdd
 from bonsai.tool.cad import Cad
 from bonsai.tool.clash import Clash
 from bonsai.tool.classification import Classification
-from bonsai.tool.clip_box import ClipBox
 from bonsai.tool.collector import Collector
-from bonsai.tool.connection import Connection
 from bonsai.tool.context import Context
 from bonsai.tool.cost import Cost
 from bonsai.tool.covering import Covering
@@ -80,6 +78,3 @@ from bonsai.tool.type import Type
 from bonsai.tool.unit import Unit
 from bonsai.tool.wall import Wall
 from bonsai.tool.web import Web
-
-# Have to move after import of tool.drawing
-from bonsai.tool.autosave import Autosave  # isort: skip

src/bonsai/bonsai/tool/array.py

@@ -178,25 +178,6 @@ class Array(bonsai.core.tool.Array):
         element_root = cls.get_array_root_guid(element)
         return [o for o in occurrences if cls.get_array_root_guid(o) == element_root]
 
-    @classmethod
-    def select_only_parent(cls, parent_obj: bpy.types.Object, context: bpy.types.Context) -> None:
-        """Post-condition for the user-facing regenerate and finish-edit paths:
-        only ``parent_obj`` is selected + active. Grow and shrink otherwise
-        diverge on which objects stay selected, surfacing an inconsistency."""
-        tool.Blender.select_and_activate_single_object(context, parent_obj)
-
-    @classmethod
-    def is_array_child(cls, element: entity_instance) -> bool:
-        """True when ``element`` is a child of a parametric array — has a
-        BBIM_Array pset whose Parent GUID points to a different element.
-        Lighter than ``get_child_layer_index`` (no ``by_guid`` lookup, no
-        Data parse); suitable for per-element checks in draw handlers."""
-        pset = ifcopenshell.util.element.get_pset(element, "BBIM_Array")
-        if not pset:
-            return False
-        parent_guid = pset.get("Parent")
-        return bool(parent_guid) and parent_guid != element.GlobalId
-
     @classmethod
     def get_child_layer_index(cls, child_element: entity_instance) -> int | None:
         """Index of the layer that produced ``child_element``, or ``None``

src/bonsai/bonsai/tool/autosave.py

@@ -1,194 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-from __future__ import annotations
-
-import atexit
-import logging
-import os
-from collections.abc import Callable
-from pathlib import Path
-from typing import Union
-
-import bpy
-
-import bonsai.tool as tool
-from bonsai.bim import export_ifc
-from bonsai.bim.module.model import preview_base
-
-AUTOSAVING_SUFFIX = "_autosaving.ifc"
-AUTOSAVED_SUFFIX = "_autosaved.ifc"
-
-_timer_callback: Union[Callable[[], None], None] = None
-# See cleanup_stale_autosave() for why this is a cached plain string rather
-# than looked up live.
-_active_ifc_path_cache: Union[str, None] = None
-
-
-class Autosave:
-    @classmethod
-    def get_paths(cls, ifc_path: Union[str, Path]) -> tuple[Path, Path, Path]:
-        path = Path(ifc_path)
-        stem = path.stem if path.suffix.lower() == ".ifc" else path.name
-        parent = path.parent
-        main_path = path if path.suffix.lower() == ".ifc" else parent / f"{stem}.ifc"
-        autosaving_path = parent / f"{stem}{AUTOSAVING_SUFFIX}"
-        autosaved_path = parent / f"{stem}{AUTOSAVED_SUFFIX}"
-        return main_path, autosaving_path, autosaved_path
-
-    @classmethod
-    def get_active_ifc_path(cls) -> Union[Path, None]:
-        props = tool.Blender.get_bim_props()
-        if not props.ifc_file:
-            return None
-        path = tool.Blender.ensure_blender_path_is_abs(Path(props.ifc_file))
-        if path.suffix.lower() != ".ifc":
-            return None
-        return path
-
-    @classmethod
-    def _update_active_ifc_path_cache(cls) -> None:
-        global _active_ifc_path_cache
-        ifc_path = cls.get_active_ifc_path()
-        _active_ifc_path_cache = ifc_path.as_posix() if ifc_path is not None else None
-
-    @classmethod
-    def is_enabled(cls) -> bool:
-        return bool(tool.Blender.get_addon_preferences().autosave_enabled)
-
-    @classmethod
-    def get_interval_seconds(cls) -> float:
-        minutes = tool.Blender.get_addon_preferences().autosave_interval_minutes
-        return max(1.0, float(minutes) * 60.0)
-
-    @classmethod
-    def is_eligible(cls) -> bool:
-        return cls.is_enabled() and tool.Ifc.get() is not None and cls.get_active_ifc_path() is not None
-
-    @classmethod
-    def cancel_timer(cls) -> None:
-        global _timer_callback
-        if _timer_callback is not None and bpy.app.timers.is_registered(_timer_callback):
-            bpy.app.timers.unregister(_timer_callback)
-        _timer_callback = None
-
-    @classmethod
-    def reset_timer(cls) -> None:
-        cls.cancel_timer()
-        cls._update_active_ifc_path_cache()
-        if not cls.is_eligible():
-            return
-
-        def on_timer() -> Union[float, None]:
-            cls._on_timer_expired()
-            # Reschedule by returning the next interval rather than calling
-            # reset_timer(), which would unregister this timer from within
-            # its own callback. Blender frees the timer's internal registry
-            # entry on that manual unregister, then frees it again when the
-            # callback returns - a double free that corrupts the heap and
-            # crashes Blender shortly after (e.g. when the prompt dialog
-            # spawned below is next interacted with).
-            return cls.get_interval_seconds() if cls.is_eligible() else None
-
-        global _timer_callback
-        _timer_callback = on_timer
-        bpy.app.timers.register(on_timer, first_interval=cls.get_interval_seconds())
-
-    @classmethod
-    def _on_timer_expired(cls) -> None:
-        if not cls.is_eligible():
-            return
-
-        prefs = tool.Blender.get_addon_preferences()
-        bim_props = tool.Blender.get_bim_props()
-
-        if bim_props.is_dirty:
-            if prefs.autosave_mode == "PROMPT":
-                bpy.ops.bim.autosave_prompt("INVOKE_DEFAULT")
-            elif prefs.autosave_mode == "BACKUP":
-                try:
-                    cls.perform_backup(bpy.context)
-                except Exception as error:
-                    print(f"Bonsai: autosave backup failed: {error}")
-
-    @classmethod
-    def perform_backup(cls, context: bpy.types.Context) -> None:
-        ifc_path = cls.get_active_ifc_path()
-        if ifc_path is None:
-            return
-
-        _, autosaving_path, autosaved_path = cls.get_paths(ifc_path)
-        autosaving_path.parent.mkdir(parents=True, exist_ok=True)
-
-        tool.Parametric.commit_pending_edits()
-        preview_base.discard_pending_previews(context.scene)
-
-        logger = logging.getLogger("ExportIFC")
-        output_file = autosaving_path.as_posix().replace("\\", "/")
-        settings = export_ifc.IfcExportSettings.factory(context, output_file, logger)
-        export_ifc.IfcExporter(settings).export()
-
-        try:
-            os.replace(autosaving_path, autosaved_path)
-        except OSError:
-            if autosaving_path.is_file():
-                autosaving_path.unlink(missing_ok=True)
-            raise
-
-    @classmethod
-    def get_newer_autosaved_path(cls, ifc_path: Union[str, Path]) -> Union[str, None]:
-        path = Path(ifc_path)
-        if path.suffix.lower() != ".ifc" or not path.is_file():
-            return None
-
-        _, _, autosaved_path = cls.get_paths(path)
-        if not autosaved_path.is_file():
-            return None
-        if autosaved_path.stat().st_mtime > path.stat().st_mtime:
-            return autosaved_path.as_posix().replace("\\", "/")
-        return None
-
-    @classmethod
-    def cleanup_stale_autosave(cls) -> None:
-        """Remove the active IFC's autosave file(s) on a graceful shutdown.
-
-        Registered via `atexit`, which only runs on a normal interpreter
-        shutdown - never on an actual crash. So a deliberate quit (whether
-        the user saved or chose "don't save") clears the recovery file and
-        won't prompt on next startup, while a genuine crash leaves it in
-        place for recovery, since no atexit callbacks fire then.
-
-        Deliberately reads only `_active_ifc_path_cache` - a plain string
-        kept up to date by `reset_timer()` - rather than touching `bpy` here.
-        By the time `atexit` fires, Blender's own C++ side is torn down far
-        enough that even reading `bpy.context.scene` aborts the process
-        (std::bad_optional_access) instead of raising a catchable exception.
-        """
-        if _active_ifc_path_cache is None:
-            return
-        try:
-            _, autosaving_path, autosaved_path = cls.get_paths(_active_ifc_path_cache)
-            autosaving_path.unlink(missing_ok=True)
-            autosaved_path.unlink(missing_ok=True)
-        except Exception:
-            pass
-
-
-atexit.register(Autosave.cleanup_stale_autosave)

src/bonsai/bonsai/tool/blender.py

@@ -30,15 +30,7 @@ import sys
 import tempfile
 import traceback
 import types
-from collections.abc import (
-    Callable,
-    Generator,
-    Iterable,
-    Iterator,
-    Mapping,
-    Sequence,
-    Sized,
-)
+from collections.abc import Callable, Generator, Iterable, Mapping, Sequence, Sized
 from datetime import datetime
 from functools import cache, lru_cache
 from pathlib import Path
@@ -55,11 +47,9 @@ from typing import (
 
 import bmesh
 import bpy
-import gpu
 import ifcopenshell.util.element
 import numpy as np
 import numpy.typing as npt
-from gpu_extras.batch import batch_for_shader
 from ifcopenshell import entity_instance
 from mathutils import Matrix, Vector
 
@@ -538,19 +528,6 @@ class Blender(bonsai.core.tool.Blender):
             cls.handlers.clear()
             cls.is_installed = False
 
-        def draw_batch(self, shader_type, content_pos, color, indices=None):
-            """Submit a GPU batch through ``self.line_shader`` (for ``"LINES"``)
-            or ``self.shader`` (for any other primitive). Skips empty batches
-            via ``validate_shader_batch_data`` so Blender 4.4+ doesn't crash on
-            empty ``indices``. Subclasses bind both shaders in their draw method
-            before calling this helper."""
-            if not Blender.validate_shader_batch_data(content_pos, indices):
-                return
-            shader = self.line_shader if shader_type == "LINES" else self.shader
-            batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
-            shader.uniform_float("color", color)
-            batch.draw(shader)
-
         @staticmethod
         def _lookup_active_instance(gizmo_cls: type, context: bpy.types.Context) -> Optional[Any]:
             """Return the live ``GizmoGroup`` instance registered under
@@ -598,120 +575,6 @@ class Blender(bonsai.core.tool.Blender):
                 else:
                     decorator_cls.uninstall()
 
-    # Bonsai overrides Blender's default move/duplicate keymaps with macros
-    # that wrap TRANSFORM_OT_translate. While a macro is the outer modal
-    # entry, the inner TRANSFORM_OT_translate does not surface in
-    # window.modal_operators — the macro's own idname does. The ``BIM_OT_``
-    # prefix is what Blender returns from ``bl_idname`` at runtime (the
-    # class declaration uses the dotted ``bim.`` form).
-    BONSAI_TRANSFORM_MACROS: frozenset[str] = frozenset(
-        {
-            "BIM_OT_override_move_macro",  # G key
-            "BIM_OT_override_object_duplicate_move_macro",  # Shift+D
-            "BIM_OT_override_object_duplicate_move_linked_macro",  # Alt+D
-            "BIM_OT_object_duplicate_move_linked_aggregate_macro",  # Ctrl+Shift+D
-        }
-    )
-
-    @classmethod
-    def is_transform_modal_active(cls, context: bpy.types.Context) -> bool:
-        """True iff a Blender transform modal (G/R/S and siblings, including
-        Bonsai's macro overrides) is currently driving per-frame
-        ``matrix_world`` updates. Reads ``window.modal_operators`` — the
-        Blender 4.2+ collection of running modal operators. Callers gate
-        per-frame side effects (gizmo positioning, IFC persistence, etc.)
-        on this so they don't fire during the drag.
-
-        Falls back to scanning every window in the window manager when
-        ``context.window`` is ``None`` — depsgraph callbacks run with a
-        limited context where ``context.window`` is typically missing,
-        but the modal is still active on one of the WM's windows.
-        """
-        window = getattr(context, "window", None)
-        if window is not None and getattr(window, "modal_operators", None):
-            windows = [window]
-        else:
-            wm = getattr(context, "window_manager", None) or bpy.context.window_manager
-            if wm is None:
-                return False
-            windows = list(wm.windows)
-        for w in windows:
-            modal_ops = getattr(w, "modal_operators", None)
-            if not modal_ops:
-                continue
-            for op in modal_ops:
-                idname = op.bl_idname
-                if idname.startswith("TRANSFORM_OT_") or idname in cls.BONSAI_TRANSFORM_MACROS:
-                    return True
-        return False
-
-    @classmethod
-    def is_in_edit_mode(cls, context: Optional[bpy.types.Context] = None) -> bool:
-        """True iff the active object is in any edit-style mode.
-
-        Catches every ``EDIT_*`` variant (mesh, curve, armature,
-        metaball, lattice, surface, text, grease pencil). Defaults to
-        ``OBJECT`` when the mode attribute is missing so background-mode
-        callers (no UI context) don't false-positive.
-        """
-        ctx = context if context is not None else bpy.context
-        mode = getattr(ctx, "mode", "OBJECT")
-        return mode.startswith("EDIT_")
-
-    @classmethod
-    def iter_view3d_regions(cls) -> Iterator[tuple[bpy.types.Area, bpy.types.Region, bpy.types.RegionView3D]]:
-        """Yield ``(area, region, region_3d)`` for every WINDOW region in every 3D viewport.
-
-        Useful for features that need to act on every visible 3D viewport
-        (clip planes, draw handlers, region redraw fanout). Empty
-        generator when ``bpy.context.screen`` is unavailable (shutdown,
-        background mode without a screen).
-        """
-        screen = getattr(getattr(bpy, "context", None), "screen", None)
-        if screen is None:
-            return
-        for area in screen.areas:
-            if area.type != "VIEW_3D":
-                continue
-            for region in area.regions:
-                if region.type != "WINDOW":
-                    continue
-                region_3d = getattr(region, "data", None)
-                if region_3d is None:
-                    continue
-                yield area, region, region_3d
-
-    @classmethod
-    def get_or_create_collection(cls, scene: bpy.types.Scene, name: str) -> bpy.types.Collection:
-        """Return the named collection, creating + linking it to ``scene`` if absent."""
-        collection = bpy.data.collections.get(name)
-        if collection is None:
-            collection = bpy.data.collections.new(name)
-            scene.collection.children.link(collection)
-        return collection
-
-    @classmethod
-    def serialize_matrix(cls, matrix: Matrix) -> str:
-        """Serialize a 4x4 matrix as a 16-float comma-separated string.
-
-        Round-trip pair with :meth:`deserialize_matrix`. Used for storing
-        a matrix in an IFC pset string property without losing precision
-        (``%.9g`` carries ~9 significant digits, enough for ``float32``
-        round-trip).
-        """
-        return ",".join(f"{matrix[r][c]:.9g}" for r in range(4) for c in range(4))
-
-    @classmethod
-    def deserialize_matrix(cls, text: str) -> Matrix:
-        """Inverse of :meth:`serialize_matrix`."""
-        floats = [float(v) for v in text.split(",")]
-        return Matrix([tuple(floats[r * 4 : r * 4 + 4]) for r in range(4)])
-
-    @classmethod
-    def hash_matrix(cls, matrix: Matrix) -> int:
-        """Hash a 4x4 matrix by its 16 floats. Useful as a cache key."""
-        return hash(tuple(matrix[r][c] for r in range(4) for c in range(4)))
-
     @classmethod
     def is_view_top_down(cls, context: bpy.types.Context, threshold: float = 0.9659) -> bool:
         """True when the viewport camera is looking ~straight down (or up) the world Z axis.
@@ -1411,10 +1274,7 @@ class Blender(bonsai.core.tool.Blender):
 
     @classmethod
     def get_object_from_guid(cls, guid: str) -> Union[bpy.types.Object, None]:
-        try:
-            element = tool.Ifc.get().by_guid(guid)
-        except RuntimeError:
-            return None
+        element = tool.Ifc.get().by_guid(guid)
         obj = tool.Ifc.get_object(element)
         if obj:
             return obj
@@ -1537,10 +1397,6 @@ class Blender(bonsai.core.tool.Blender):
                 bpy.ops.bim.enable_editing_railing_path()
             elif feature := tool.Parametric.is_object_editing(obj):
                 tool.Parametric.run_bim_op(feature.finish_op)
-            elif tool.Parametric.is_wall(element):
-                # Placed after the generic finish dispatch so the TAB toggle splits:
-                # wall already editing → finish above; wall not editing → enter here.
-                bpy.ops.bim.enable_editing_wall()
             else:
                 return False
             return True
@@ -2404,13 +2260,6 @@ class Blender(bonsai.core.tool.Blender):
             return False
         return True
 
-    @staticmethod
-    def transparent_color(color: Iterable[float], alpha: float = 0.1) -> list[float]:
-        """Copy an RGBA color with its alpha channel overridden."""
-        out = [c for c in color]
-        out[3] = alpha
-        return out
-
     @classmethod
     def draw_bmesh_face_tris(
         cls,
@@ -2429,83 +2278,6 @@ class Blender(bonsai.core.tool.Blender):
         tris = [[loop.vert.index for loop in tri] for tri in bm.calc_loop_triangles()]
         draw_batch("TRIS", world_vert_coords, color, tris)
 
-    @classmethod
-    def draw_quads(
-        cls,
-        context: bpy.types.Context,
-        quads: Sequence[
-            tuple[
-                tuple[float, float, float],
-                tuple[float, float, float],
-                tuple[float, float, float],
-                tuple[float, float, float],
-            ]
-        ],
-        *,
-        fill_color: Optional[tuple[float, float, float, float]] = None,
-        outline_color: Optional[tuple[float, float, float, float]] = None,
-        outline_width: float = 1.0,
-    ) -> None:
-        """Render ``quads`` (each a 4-tuple of CCW world-space corners) as
-        a filled TRIS batch, an outline LINES batch, or both.
-
-        Both colors are RGBA 4-tuples. Pass ``fill_color=None`` to skip
-        the fill pass and ``outline_color=None`` to skip the outline.
-        Skipping both is a no-op.
-
-        Replaces the per-decorator quad-fill helpers that used to live
-        inline in each feature module.
-        """
-        if not quads or (fill_color is None and outline_color is None):
-            return
-        region = getattr(context, "region", None)
-        if region is None:
-            return
-
-        verts: list[tuple[float, float, float]] = []
-        tri_indices: list[tuple[int, int, int]] = []
-        line_indices: list[tuple[int, int]] = []
-        for quad in quads:
-            if len(quad) != 4:
-                continue
-            base = len(verts)
-            verts.extend(tuple(v) for v in quad)
-            if fill_color is not None:
-                tri_indices.append((base, base + 1, base + 2))
-                tri_indices.append((base, base + 2, base + 3))
-            if outline_color is not None:
-                line_indices.append((base, base + 1))
-                line_indices.append((base + 1, base + 2))
-                line_indices.append((base + 2, base + 3))
-                line_indices.append((base + 3, base))
-
-        if not cls.validate_shader_batch_data(verts, None):
-            return
-
-        gpu.state.blend_set("ALPHA")
-        try:
-            if fill_color is not None and tri_indices:
-                shader = gpu.shader.from_builtin("UNIFORM_COLOR")
-                shader.bind()
-                shader.uniform_float("color", fill_color)
-                batch = batch_for_shader(shader, "TRIS", {"pos": verts}, indices=tri_indices)
-                batch.draw(shader)
-            if outline_color is not None and line_indices:
-                shader = gpu.shader.from_builtin("UNIFORM_COLOR")
-                shader.bind()
-                shader.uniform_float("color", outline_color)
-                # Outline width: the UNIFORM_COLOR shader respects the
-                # GPU's current line-width state; restore on exit.
-                prev_width = gpu.state.line_width_get()
-                gpu.state.line_width_set(outline_width)
-                try:
-                    batch = batch_for_shader(shader, "LINES", {"pos": verts}, indices=line_indices)
-                    batch.draw(shader)
-                finally:
-                    gpu.state.line_width_set(prev_width)
-        finally:
-            gpu.state.blend_set("NONE")
-
     @classmethod
     def build_dashed_line_segments(
         cls,

src/bonsai/bonsai/tool/cad.py

@@ -206,237 +206,6 @@ class Cad:
         """
         return geometry.intersect_line_plane(v1, v2, plane_co, plane_no)
 
-    @classmethod
-    def obb_world_clip_planes(
-        cls,
-        center: Vector,
-        axes: tuple[Vector, Vector, Vector],
-        half_extents: Vector,
-    ) -> tuple[tuple[float, float, float, float], ...]:
-        """Return the 6 inward world clip planes of an oriented bounding box.
-
-        Each plane is a 4-tuple ``(a, b, c, d)`` for the equation
-        ``a*x + b*y + c*z + d``; a point is KEPT when the value is ``>= 0``
-        for every plane, matching ``RegionView3D.clip_planes`` semantics.
-        Return order is ``(+x, -x, +y, -y, +z, -z)`` where ``+x`` is the face
-        on the positive side of ``axes[0]``. ``axes`` are assumed orthonormal.
-        """
-        cx, cy, cz = center.x, center.y, center.z
-        planes: list[tuple[float, float, float, float]] = []
-        for i in range(3):
-            ux, uy, uz = axes[i].x, axes[i].y, axes[i].z
-            h = float(half_extents[i])
-            px, py, pz = cx + h * ux, cy + h * uy, cz + h * uz
-            nx, ny, nz = -ux, -uy, -uz
-            planes.append((nx, ny, nz, -(nx * px + ny * py + nz * pz)))
-            px, py, pz = cx - h * ux, cy - h * uy, cz - h * uz
-            planes.append((ux, uy, uz, -(ux * px + uy * py + uz * pz)))
-        return tuple(planes)
-
-    @classmethod
-    def obb_clip_planes_from_matrix(
-        cls,
-        matrix_world: Matrix,
-        expand: float = 0.0,
-        expand_rel: float = 0.0,
-    ) -> tuple[tuple[float, float, float, float], ...]:
-        """Return the 6 inward world clip planes for the unit cube under ``matrix_world``.
-
-        The implicit box is ``[-1, +1]^3`` in object-local space, so the
-        host's ``matrix_world`` translation is the world centre, its
-        rotation orients the box axes, and each column's magnitude is the
-        world half-extent along that local axis. ``expand`` (absolute
-        world units) and ``expand_rel`` (fraction of each axis's
-        half-extent) both add an outward margin — callers that visualise
-        the box with overlapping geometry (e.g. an empty CUBE display
-        sharing edges with the clip planes) pass non-zero values so the
-        box's own wireframe sits safely INSIDE the clip volume. Use the
-        relative form when the box is rendered at varying scales, since
-        the depth-buffer precision needed to keep an edge unclipped grows
-        with world-coordinate magnitude.
-        """
-        world_center = matrix_world.col[3].xyz
-        linear = matrix_world.to_3x3()
-        world_axes = []
-        world_half_list = []
-        for i in range(3):
-            v = linear.col[i].copy()
-            length = v.length
-            if length > 0.0:
-                world_axes.append(v / length)
-            else:
-                world_axes.append(Vector((0.0, 0.0, 0.0)))
-            world_half_list.append(length + expand + length * expand_rel)
-        return cls.obb_world_clip_planes(
-            world_center,
-            (world_axes[0], world_axes[1], world_axes[2]),
-            Vector(world_half_list),
-        )
-
-    @classmethod
-    def point_is_inside_clip_planes(
-        cls,
-        planes: tuple[tuple[float, float, float, float], ...],
-        point: Vector,
-        eps: float = 1e-6,
-    ) -> bool:
-        """True iff ``point`` is on the kept side of every plane (inclusive)."""
-        x, y, z = point.x, point.y, point.z
-        for a, b, c, d in planes:
-            if a * x + b * y + c * z + d < -eps:
-                return False
-        return True
-
-    @classmethod
-    def newell_normal(cls, points: Sequence) -> Vector:
-        """Newell's-method normal for a (possibly non-planar) 3D polygon ring.
-
-        Robust for thin / near-degenerate rings where a two-edge cross
-        product would be unstable.
-        """
-        nx = ny = nz = 0.0
-        n = len(points)
-        for i in range(n):
-            cur = points[i]
-            nxt = points[(i + 1) % n]
-            nx += (cur[1] - nxt[1]) * (cur[2] + nxt[2])
-            ny += (cur[2] - nxt[2]) * (cur[0] + nxt[0])
-            nz += (cur[0] - nxt[0]) * (cur[1] + nxt[1])
-        return Vector((nx, ny, nz))
-
-    @classmethod
-    def plane_basis(cls, points: Sequence) -> tuple[Vector, Vector]:
-        """Return an orthonormal ``(u, v)`` basis for the ring's best-fit plane."""
-        normal = cls.newell_normal(points)
-        if normal.length < 1e-12:
-            normal = Vector((0.0, 0.0, 1.0))
-        normal = normal.normalized()
-        ref = Vector((1.0, 0.0, 0.0))
-        if abs(normal.x) > 0.9:
-            ref = Vector((0.0, 1.0, 0.0))
-        u = normal.cross(ref)
-        if u.length < 1e-12:
-            ref = Vector((0.0, 0.0, 1.0))
-            u = normal.cross(ref)
-        u = u.normalized()
-        v = normal.cross(u).normalized()
-        return u, v
-
-    @classmethod
-    def tessellate_ring_planar(cls, polyline_list: list[list]) -> list[tuple[int, int, int]]:
-        """Triangulate ``[outer, *inners]`` 3D coord rings in their own plane.
-
-        Projects every ring onto the outer ring's best-fit plane and
-        returns ``(i, j, k)`` index triples into the flat
-        ``outer + inners[0] + inners[1] + ...`` vertex list. Falls
-        back to a shapely constrained Delaunay triangulation when
-        ``mathutils.geometry.tessellate_polygon`` silently leaves ring
-        vertices unused (its known failure mode on complex concave
-        polygons-with-holes).
-        """
-        from mathutils.geometry import tessellate_polygon
-
-        if not polyline_list or not polyline_list[0]:
-            return []
-        outer = polyline_list[0]
-        u, v = cls.plane_basis(outer)
-        origin = Vector(outer[0])
-
-        def _project_xy(ring):
-            return [((Vector(co) - origin).dot(u), (Vector(co) - origin).dot(v)) for co in ring]
-
-        projected_xy = [_project_xy(ring) for ring in polyline_list]
-        projected = [[Vector((x, y, 0.0)) for x, y in ring] for ring in projected_xy]
-        triangles = tessellate_polygon(projected)
-
-        n_total = sum(len(r) for r in projected_xy)
-        used = {i for tri in triangles for i in tri}
-        if triangles and len(used) >= n_total:
-            return triangles
-
-        fallback = cls._tessellate_via_shapely(projected_xy)
-        return fallback if fallback else triangles
-
-    @classmethod
-    def _tessellate_via_shapely(cls, projected_xy: list[list[tuple[float, float]]]) -> list[tuple[int, int, int]]:
-        """Constrained-Delaunay fallback for :meth:`tessellate_ring_planar`.
-
-        Honours the polygon's boundary AND holes. Returns ``[]`` when
-        shapely is unavailable or the polygon can't be cleaned via
-        ``buffer(0)``.
-        """
-        try:
-            from shapely.geometry import Polygon
-        except Exception:
-            return []
-        outer = projected_xy[0]
-        inners = projected_xy[1:]
-        if len(outer) < 3:
-            return []
-        try:
-            poly = Polygon(outer, inners)
-            poly = poly if poly.is_valid else poly.buffer(0)
-            if poly.is_empty:
-                return []
-        except Exception:
-            return []
-
-        flat = list(outer)
-        for r in inners:
-            flat.extend(r)
-
-        def _key(x, y):
-            return (round(x, 6), round(y, 6))
-
-        index_of: dict[tuple[float, float], int] = {}
-        for idx, (x, y) in enumerate(flat):
-            index_of.setdefault(_key(x, y), idx)
-
-        try:
-            from shapely import constrained_delaunay_triangles
-
-            res = constrained_delaunay_triangles(poly)
-            tri_geoms = list(getattr(res, "geoms", []) or [])
-        except Exception:
-            try:
-                from shapely.ops import triangulate
-
-                tri_geoms = [t for t in triangulate(poly) if poly.contains(t.representative_point())]
-            except Exception:
-                return []
-
-        out: list[tuple[int, int, int]] = []
-        for t in tri_geoms:
-            coords = list(t.exterior.coords)[:-1]
-            if len(coords) != 3:
-                continue
-            idxs = [index_of.get(_key(x, y)) for x, y in coords]
-            if any(i is None for i in idxs):
-                continue
-            out.append(tuple(idxs))
-        return out
-
-    @classmethod
-    def corners_might_cross_clip_planes(
-        cls,
-        planes: tuple[tuple[float, float, float, float], ...],
-        corners: Sequence[Vector],
-    ) -> bool:
-        """Conservative reject test: True if ``corners`` might cross the clip volume.
-
-        Returns False only when at least one plane has ALL corners on its
-        rejected side — meaning the convex hull of ``corners`` is fully
-        outside the clip volume and a per-mesh bisect can be skipped.
-        Returns True otherwise (possibly with false positives — never
-        false negatives), so callers always cap any object that actually
-        crosses the box. ``corners`` is typically the 8 world-space corners
-        of an object's bound box.
-        """
-        for a, b, c, d in planes:
-            if all(a * v.x + b * v.y + c * v.z + d < 0.0 for v in corners):
-                return False
-        return True
-
     def intersect_edge_plane_v2(v1, v2, plane_co, plane_no, eps=1e-9):
         """
         Numpy version of intersect_edge_plane

src/bonsai/bonsai/tool/connection.py

@@ -1,168 +0,0 @@
-# Bonsai - OpenBIM Blender Add-on
-# Copyright (C) 2026
-#
-# This file is part of Bonsai.
-#
-# Bonsai is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Bonsai is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
-#
-# This file was generated with the assistance of an AI coding tool.
-
-"""Generic discovery of the connection linking two IFC elements.
-
-Used by ``bim.disconnect_elements`` so the operator surface is one operator
-per disconnect intent (active vs. partner, identified by GlobalId) rather
-than one per rel class. Each lookup returns ``(subject, kind)`` tuples where
-``subject`` is the entity whose teardown effects the disconnect:
-
-- ``"path"`` — ``IfcRelConnectsPathElements`` (wall-wall, wall-roof, etc.).
-  ``subject`` is the rel; removing it disconnects.
-- ``"element-top"`` — ``IfcRelConnectsElements`` with ``Description=="TOP"``
-  (created by ``extend_walls_to_underside``). ``subject`` is the rel.
-- ``"element"`` — any other ``IfcRelConnectsElements``. ``subject`` is the rel.
-- ``"mep-pair-fitting"`` — two MEP elements joined via ``IfcRelConnectsPorts``
-  through a single bridging ``IfcFlowFitting``. ``subject`` is the fitting
-  itself; removing it disconnects. ``OBSTRUCTION`` fittings are excluded
-  here; those go through ``bim.mep_add_obstruction(mode=REMOVE)``.
-
-Add new kinds by extending :py:meth:`Connection.find_rels`. The dispatch in
-``bonsai.core.connection.disconnect_rel`` maps each kind to the right
-post-mutation cleanup; the AST forward-compat guard enforces coverage."""
-
-from __future__ import annotations
-
-from typing import TYPE_CHECKING
-
-import bonsai.tool as tool
-
-if TYPE_CHECKING:
-    import ifcopenshell
-
-
-class Connection:
-    @classmethod
-    def find_rels(
-        cls,
-        elem_a: ifcopenshell.entity_instance,
-        elem_b: ifcopenshell.entity_instance,
-    ) -> list[tuple[ifcopenshell.entity_instance, str]]:
-        """Return every supported connection linking ``elem_a`` to ``elem_b``
-        as a list of ``(subject, kind)`` tuples — ``subject`` is the entity
-        whose teardown effects the disconnect (the rel itself for
-        relationship-kinds, the bridging fitting for ``"mep-pair-fitting"``).
-        Walks both ``ConnectedTo`` and ``ConnectedFrom`` because either side
-        of a rel can be the relating element, and the same pair may carry
-        rels authored with opposite orientations."""
-        rels: list[tuple[ifcopenshell.entity_instance, str]] = []
-        seen: set[int] = set()
-
-        def _record(rel, kind):
-            if rel.id() not in seen:
-                seen.add(rel.id())
-                rels.append((rel, kind))
-
-        for rel in getattr(elem_a, "ConnectedTo", []) or ():
-            if rel.is_a("IfcRelConnectsPathElements") and getattr(rel, "RelatedElement", None) == elem_b:
-                _record(rel, "path")
-        for rel in getattr(elem_a, "ConnectedFrom", []) or ():
-            if rel.is_a("IfcRelConnectsPathElements") and getattr(rel, "RelatingElement", None) == elem_b:
-                _record(rel, "path")
-
-        for rel in getattr(elem_a, "ConnectedFrom", []) or ():
-            if rel.is_a("IfcRelConnectsElements") and getattr(rel, "RelatingElement", None) == elem_b:
-                kind = "element-top" if getattr(rel, "Description", None) == "TOP" else "element"
-                _record(rel, kind)
-        for rel in getattr(elem_a, "ConnectedTo", []) or ():
-            if rel.is_a("IfcRelConnectsElements") and getattr(rel, "RelatedElement", None) == elem_b:
-                kind = "element-top" if getattr(rel, "Description", None) == "TOP" else "element"
-                _record(rel, kind)
-
-        fitting = tool.System.find_bridging_fitting(elem_a, elem_b)
-        if fitting is not None:
-            _record(fitting, "mep-pair-fitting")
-
-        return rels
-
-    @classmethod
-    def find_rel(
-        cls,
-        elem_a: ifcopenshell.entity_instance,
-        elem_b: ifcopenshell.entity_instance,
-    ) -> tuple[ifcopenshell.entity_instance | None, str | None]:
-        """Return the first ``(subject, kind)`` or ``(None, None)``. Cheaper
-        than ``find_rels`` when callers only need to know whether a connection
-        exists or what kind it is."""
-        rels = cls.find_rels(elem_a, elem_b)
-        return rels[0] if rels else (None, None)
-
-    @classmethod
-    def find_rels_for_element(
-        cls,
-        elem: ifcopenshell.entity_instance,
-    ) -> list[tuple[ifcopenshell.entity_instance, str, ifcopenshell.entity_instance]]:
-        """Return every supported connection touching ``elem`` as
-        ``(subject, kind, partner)`` triples. ``partner`` is the *other*
-        element on the connection — the side cascade cleanup must operate on
-        when ``elem`` is being deleted.
-
-        Mirrors :py:meth:`find_rels`'s relationship-kind taxonomy. Notably
-        does NOT emit ``"mep-pair-fitting"`` triples: ``IfcRelConnectsPorts``
-        cleanup is owned by ``tool.Geometry.delete_ifc_object``'s
-        ``remove_port`` loop, which runs unconditionally on any IFC root
-        deletion. Including MEP here would cause the cascade to also remove
-        the bridging fitting when one of its connected segments is deleted —
-        a policy choice (fitting may still join other live segments) that's
-        better left to the user via the explicit disconnect operator.
-        """
-        result: list[tuple[ifcopenshell.entity_instance, str, ifcopenshell.entity_instance]] = []
-        seen: set[int] = set()
-
-        def _record(rel, kind, partner):
-            if partner is None or rel.id() in seen:
-                return
-            seen.add(rel.id())
-            result.append((rel, kind, partner))
-
-        for rel in getattr(elem, "ConnectedTo", []) or ():
-            if rel.is_a("IfcRelConnectsPathElements"):
-                _record(rel, "path", getattr(rel, "RelatedElement", None))
-            elif rel.is_a("IfcRelConnectsElements"):
-                kind = "element-top" if getattr(rel, "Description", None) == "TOP" else "element"
-                _record(rel, kind, getattr(rel, "RelatedElement", None))
-        for rel in getattr(elem, "ConnectedFrom", []) or ():
-            if rel.is_a("IfcRelConnectsPathElements"):
-                _record(rel, "path", getattr(rel, "RelatingElement", None))
-            elif rel.is_a("IfcRelConnectsElements"):
-                kind = "element-top" if getattr(rel, "Description", None) == "TOP" else "element"
-                _record(rel, kind, getattr(rel, "RelatingElement", None))
-
-        return result
-
-    @classmethod
-    def orient_element_top(
-        cls,
-        rel: ifcopenshell.entity_instance,
-        elem_a: ifcopenshell.entity_instance,
-        elem_b: ifcopenshell.entity_instance,
-    ) -> tuple[ifcopenshell.entity_instance, ifcopenshell.entity_instance]:
-        """Return ``(wall, slab)`` for an ``IfcRelConnectsElements(TOP)`` rel.
-
-        The ``extend_walls_to_underside`` flow stores slab as the relating
-        side and wall as related — orientation is recovered by checking
-        which input matches which rel attribute. Callers pass any two
-        elements; this resolves which is the wall and which is the slab so
-        post-disconnect cleanup (regenerate-wall-to-underside) targets the
-        right object."""
-        if getattr(rel, "RelatingElement", None) == elem_a:
-            return elem_b, elem_a
-        return elem_a, elem_b

src/bonsai/bonsai/tool/drawing.py

@@ -78,7 +78,6 @@ if TYPE_CHECKING:
 
 class Drawing(bonsai.core.tool.Drawing):
     ANNOTATION_DATA_TYPE = Literal["empty", "curve", "mesh"]
-    PERSPECTIVE_CAMERA_SHIFT_PROPERTIES = ("PerspectiveShiftX", "PerspectiveShiftY")
     DOCUMENT_TYPE = Literal["SCHEDULE", "REFERENCE"]
     LocationHintLiteral = Literal["PERSPECTIVE", "ORTHOGRAPHIC", "NORTH", "SOUTH", "EAST", "WEST"]
     LOCATION_HINT_LITERALS = ("PERSPECTIVE", "ORTHOGRAPHIC", "NORTH", "SOUTH", "EAST", "WEST")
@@ -454,41 +453,6 @@ class Drawing(bonsai.core.tool.Drawing):
         camera.matrix_world = matrix
         return camera
 
-    @classmethod
-    def get_perspective_camera_shifts(cls, drawing: ifcopenshell.entity_instance) -> dict[str, float]:
-        pset = ifcopenshell.util.element.get_pset(drawing, "EPset_Drawing") or {}
-        shift_x_prop, shift_y_prop = cls.PERSPECTIVE_CAMERA_SHIFT_PROPERTIES
-        return {
-            "shift_x": float(pset.get(shift_x_prop, 0.0) or 0.0),
-            "shift_y": float(pset.get(shift_y_prop, 0.0) or 0.0),
-        }
-
-    @classmethod
-    def sync_perspective_camera_shifts(cls, drawing: ifcopenshell.entity_instance, camera: bpy.types.Camera) -> None:
-        if camera.type != "PERSP":
-            return
-
-        shift_x_prop, shift_y_prop = cls.PERSPECTIVE_CAMERA_SHIFT_PROPERTIES
-        current_shifts = cls.get_perspective_camera_shifts(drawing)
-        new_shifts = {"shift_x": float(camera.shift_x or 0.0), "shift_y": float(camera.shift_y or 0.0)}
-        if tool.Cad.is_x(current_shifts["shift_x"], new_shifts["shift_x"]) and tool.Cad.is_x(
-            current_shifts["shift_y"], new_shifts["shift_y"]
-        ):
-            return
-
-        ifc_file = tool.Ifc.get()
-        pset = tool.Pset.get_element_pset(drawing, "EPset_Drawing")
-        if not pset:
-            pset = ifcopenshell.api.pset.add_pset(ifc_file, product=drawing, name="EPset_Drawing")
-        ifcopenshell.api.pset.edit_pset(
-            ifc_file,
-            pset=pset,
-            properties={
-                shift_x_prop: new_shifts["shift_x"],
-                shift_y_prop: new_shifts["shift_y"],
-            },
-        )
-
     @classmethod
     def create_svg_schedule(cls, schedule: ifcopenshell.entity_instance) -> None:
         import bonsai.bim.module.drawing.scheduler as scheduler
@@ -1045,8 +1009,6 @@ class Drawing(bonsai.core.tool.Drawing):
         camera_props.has_annotation = True
         camera_props.target_view = "PLAN_VIEW"
         camera_props.is_nts = False
-        camera.shift_x = 0.0
-        camera.shift_y = 0.0
 
         pset = ifcopenshell.util.element.get_pset(drawing, "EPset_Drawing")
         if pset:
@@ -1082,10 +1044,6 @@ class Drawing(bonsai.core.tool.Drawing):
                 camera_props.fill_mode = str(pset["FillMode"])
             if "CutMode" in pset:
                 camera_props.cut_mode = str(pset["CutMode"])
-            if camera.type == "PERSP":
-                shifts = cls.get_perspective_camera_shifts(drawing)
-                camera.shift_x = shifts["shift_x"]
-                camera.shift_y = shifts["shift_y"]
 
         camera_props.update_props = update_props
 
@@ -2309,19 +2267,14 @@ class Drawing(bonsai.core.tool.Drawing):
         cls, drawing: ifcopenshell.entity_instance, ifc_file: Optional[ifcopenshell.file] = None
     ) -> set[ifcopenshell.entity_instance]:
         """returns a set of elements that are included in the drawing"""
-        param_was_none = ifc_file is None
-        if param_was_none:
+        if ifc_file is None:
             ifc_file = tool.Ifc.get()
+            elements = cls.get_elements_in_camera_view(tool.Ifc.get_object(drawing), bpy.data.objects)
+        else:
+            # This can probably be smarter
+            elements = set(ifc_file.by_type("IfcElement"))
         pset = ifcopenshell.util.element.get_psets(drawing).get("EPset_Drawing", {})
         include = pset.get("Include", None)
-
-        # Only the active IFC file has Blender objects we can test against the
-        # camera's view frustum, which lets us drop elements - including those
-        # picked by an Include filter - that fall outside the drawing boundary.
-        camera_view_elements = None
-        if (param_was_none or include) and ifc_file is tool.Ifc.get():
-            camera_view_elements = cls.get_elements_in_camera_view(tool.Ifc.get_object(drawing), bpy.data.objects)
-
         if include:
             try:
                 data = json.loads(include)
@@ -2333,16 +2286,7 @@ class Drawing(bonsai.core.tool.Drawing):
                     elements = ifcopenshell.util.selector.filter_elements(ifc_file, include)
             except (json.JSONDecodeError, ValueError):
                 elements = ifcopenshell.util.selector.filter_elements(ifc_file, include)
-            # The Include filter chooses which elements may appear, but they must
-            # still fall within the drawing's camera boundary.
-            if camera_view_elements is not None:
-                elements &= camera_view_elements
         else:
-            if param_was_none:
-                elements = camera_view_elements
-            else:
-                # This can probably be smarter
-                elements = set(ifc_file.by_type("IfcElement"))
             if ifc_file.schema == "IFC2X3":
                 base_elements = set(ifc_file.by_type("IfcElement") + ifc_file.by_type("IfcSpatialStructureElement"))
             else:
@@ -2440,13 +2384,13 @@ class Drawing(bonsai.core.tool.Drawing):
     @classmethod
     def is_drawing_active(cls) -> bool:
         camera = bpy.context.scene.camera
-        if not (camera is not None and camera.type == "CAMERA" and tool.Blender.get_ifc_definition_id(camera)):
-            return False
-        # A VIEW_3D area is meaningless (and unobtainable) in background
-        # mode, but isn't otherwise required to generate a drawing.
-        if bpy.app.background:
-            return True
-        return tool.Blender.get_view3d_area() is not None
+        area = tool.Blender.get_view3d_area()
+        return bool(
+            camera is not None
+            and camera.type == "CAMERA"
+            and tool.Blender.get_ifc_definition_id(camera)
+            and area is not None
+        )
 
     @classmethod
     def is_camera_orthographic(cls) -> bool:
@@ -2577,19 +2521,10 @@ class Drawing(bonsai.core.tool.Drawing):
                     has_context = True
                     break
 
-        linked_handles: set[bpy.types.Object] = set()
-        for link in tool.Project.get_project_props().get_loaded_links_for_drawings():
-            try:
-                handle = tool.Project.get_link_empty_handle(link)
-            except Exception:
-                continue
-            if handle:
-                linked_handles.add(handle)
-
         visible_objects = []
         for obj in bpy.context.view_layer.objects:
             if element := tool.Ifc.get_entity(obj):
-                if element in filtered_elements or obj in linked_handles:
+                if element in filtered_elements:
                     visible_objects.append(obj)
             else:
                 if obj.hide_get() is False:

src/bonsai/bonsai/tool/duplicate.py

@@ -248,30 +248,32 @@ class Duplicate(bonsai.core.tool.Duplicate):
         old_to_new: dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]],
     ) -> None:
         for element, data in relationship.items():
-            new_relating_elements = old_to_new.get(data.relating_element) or []
-            new_related_elements = old_to_new.get(data.related_element) or []
+            try:
+                new_relating_element = old_to_new.get(data.relating_element)[0]
+                new_related_element = old_to_new.get(data.related_element)[0]
+            except (KeyError, IndexError, TypeError):
+                continue
+            new_rel = tool.Ifc.run(
+                "geometry.connect_path",
+                relating_element=new_relating_element,
+                related_element=new_related_element,
+                relating_connection=data.relating_connection_type,
+                related_connection=data.related_connection_type,
+            )
             # connect_path hardcodes priorities to []; restore them post-hoc.
             priority_attrs: dict[str, Any] = {}
             if data.relating_priorities:
                 priority_attrs["RelatingPriorities"] = data.relating_priorities
             if data.related_priorities:
                 priority_attrs["RelatedPriorities"] = data.related_priorities
-            for new_relating_element, new_related_element in zip(new_relating_elements, new_related_elements):
-                new_rel = tool.Ifc.run(
-                    "geometry.connect_path",
-                    relating_element=new_relating_element,
-                    related_element=new_related_element,
-                    relating_connection=data.relating_connection_type,
-                    related_connection=data.related_connection_type,
-                )
-                if new_rel is not None and priority_attrs:
-                    try:
-                        tool.Ifc.run("attribute.edit_attributes", product=new_rel, attributes=priority_attrs)
-                    except (RuntimeError, ifcopenshell.Error) as e:
-                        cls._emit_warning(
-                            f"connection priority restore failed for {new_rel}; "
-                            f"duplicate has empty RelatingPriorities/RelatedPriorities: {e}"
-                        )
+            if new_rel is not None and priority_attrs:
+                try:
+                    tool.Ifc.run("attribute.edit_attributes", product=new_rel, attributes=priority_attrs)
+                except (RuntimeError, ifcopenshell.Error) as e:
+                    cls._emit_warning(
+                        f"connection priority restore failed for {new_rel}; "
+                        f"duplicate has empty RelatingPriorities/RelatedPriorities: {e}"
+                    )
 
     @classmethod
     def recreate_port_connections(
@@ -281,43 +283,46 @@ class Duplicate(bonsai.core.tool.Duplicate):
     ) -> None:
         """Recreate ``IfcRelConnectsPorts`` between duplicates; skip records whose duplicate's port count diverges from the snapshot."""
         for relating_element, records in snapshot.by_element.items():
-            new_relatings = old_to_new.get(relating_element) or []
-            expected_relating = snapshot.port_counts.get(relating_element)
             for record in records:
                 related_element = record.related_element
-                new_relateds = old_to_new.get(related_element) or []
+                try:
+                    new_relating = old_to_new[relating_element][0]
+                    new_related = old_to_new[related_element][0]
+                except (KeyError, IndexError):
+                    continue
+
+                new_relating_ports = tool.System.get_ports(new_relating)
+                new_related_ports = tool.System.get_ports(new_related)
+
+                expected_relating = snapshot.port_counts.get(relating_element)
+                if expected_relating is not None and len(new_relating_ports) != expected_relating:
+                    cls._emit_warning(
+                        f"port reconnect skipped — duplicate has {len(new_relating_ports)} ports, "
+                        f"snapshot had {expected_relating}"
+                    )
+                    continue
                 expected_related = snapshot.port_counts.get(related_element)
-                for new_relating, new_related in zip(new_relatings, new_relateds):
-                    new_relating_ports = tool.System.get_ports(new_relating)
-                    new_related_ports = tool.System.get_ports(new_related)
+                if expected_related is not None and len(new_related_ports) != expected_related:
+                    cls._emit_warning(
+                        f"port reconnect skipped — duplicate has {len(new_related_ports)} ports, "
+                        f"snapshot had {expected_related}"
+                    )
+                    continue
 
-                    if expected_relating is not None and len(new_relating_ports) != expected_relating:
-                        cls._emit_warning(
-                            f"port reconnect skipped — duplicate has {len(new_relating_ports)} ports, "
-                            f"snapshot had {expected_relating}"
-                        )
-                        continue
-                    if expected_related is not None and len(new_related_ports) != expected_related:
-                        cls._emit_warning(
-                            f"port reconnect skipped — duplicate has {len(new_related_ports)} ports, "
-                            f"snapshot had {expected_related}"
-                        )
-                        continue
-
-                    try:
-                        new_port_a = new_relating_ports[record.relating_port_index]
-                        new_port_b = new_related_ports[record.related_port_index]
-                    except IndexError:
-                        cls._emit_warning(
-                            f"port reconnect skipped — record references port index past the duplicate's port list"
-                        )
-                        continue
-                    try:
-                        tool.Ifc.run(
-                            "system.connect_port",
-                            port1=new_port_a,
-                            port2=new_port_b,
-                            direction=record.direction or "NOTDEFINED",
-                        )
-                    except (RuntimeError, ifcopenshell.Error) as e:
-                        cls._emit_warning(f"port reconnect failed between duplicates: {e}")
+                try:
+                    new_port_a = new_relating_ports[record.relating_port_index]
+                    new_port_b = new_related_ports[record.related_port_index]
+                except IndexError:
+                    cls._emit_warning(
+                        f"port reconnect skipped — record references port index past the duplicate's port list"
+                    )
+                    continue
+                try:
+                    tool.Ifc.run(
+                        "system.connect_port",
+                        port1=new_port_a,
+                        port2=new_port_b,
+                        direction=record.direction or "NOTDEFINED",
+                    )
+                except (RuntimeError, ifcopenshell.Error) as e:
+                    cls._emit_warning(f"port reconnect failed between duplicates: {e}")

src/bonsai/bonsai/tool/geometry.py

@@ -24,7 +24,6 @@ import multiprocessing
 import struct
 from collections import defaultdict
 from collections.abc import Generator, Iterable, Iterator
-from contextlib import contextmanager
 from math import pi, radians
 from typing import (
     TYPE_CHECKING,
@@ -66,7 +65,6 @@ from typing_extensions import TypeIs
 
 import bonsai.bim.helper
 import bonsai.bim.import_ifc
-import bonsai.core.connection
 import bonsai.core.drawing
 import bonsai.core.geometry
 import bonsai.core.root
@@ -131,85 +129,6 @@ class Geometry(bonsai.core.tool.Geometry):
         if cache and hasattr(element, "GlobalId"):
             cache.remove(element.GlobalId)
 
-    # Per-host work coalesced by `batch_host_recut`. Keys are voided element ifc ids;
-    # dict insertion preserves call ordering. Recut values store the representation at
-    # enqueue time, but the drain re-reads `get_active_representation` so the recut
-    # always reflects current IFC state.
-    _host_batch_depth: int = 0
-    _host_recut_queue: dict[int, tuple[bpy.types.Object, ifcopenshell.entity_instance]] = {}
-    _host_update_queue: dict[int, bpy.types.Object] = {}
-
-    @classmethod
-    @contextmanager
-    def batch_host_recut(cls) -> Generator[None, None, None]:
-        """Coalesce host body work — `recut_host` and `update_host_representation`
-        calls inside the with-block enqueue by voided element id. On the outermost
-        exit: every host's `update_representation` runs first (writes Blender mesh
-        back to IFC), then every host's `switch_representation` runs (reads IFC +
-        openings → Blender mesh). The two-phase order matters: a recut that ran
-        before the matching update_representation would re-tessellate against stale
-        IFC, losing the user's edits.
-
-        Nests safely — only the outermost exit drains. The depth counter and queues
-        are reset on exit even if the body raises."""
-        cls._host_batch_depth += 1
-        try:
-            yield
-        finally:
-            cls._host_batch_depth -= 1
-            if cls._host_batch_depth == 0:
-                update_queue = cls._host_update_queue
-                recut_queue = cls._host_recut_queue
-                cls._host_update_queue = {}
-                cls._host_recut_queue = {}
-                for voided_obj in update_queue.values():
-                    try:
-                        if not voided_obj or not voided_obj.data:
-                            continue
-                    except ReferenceError:
-                        # Blender object was deleted while the batch was open
-                        # (e.g. user removed it via the outliner mid-op).
-                        continue
-                    if tool.Ifc.get_entity(voided_obj) is None:
-                        continue
-                    bpy.ops.bim.update_representation(obj=voided_obj.name)
-                for voided_obj, _ in recut_queue.values():
-                    try:
-                        if not voided_obj or not voided_obj.data:
-                            continue
-                    except ReferenceError:
-                        continue
-                    if tool.Ifc.get_entity(voided_obj) is None:
-                        continue
-                    current_rep = cls.get_active_representation(voided_obj)
-                    if current_rep is None:
-                        continue
-                    bonsai.core.geometry.switch_representation(
-                        tool.Ifc, cls, obj=voided_obj, representation=current_rep
-                    )
-
-    @classmethod
-    def recut_host(cls, voided_obj: bpy.types.Object, representation: ifcopenshell.entity_instance) -> None:
-        """Recut a host's body representation. Inside `batch_host_recut`, enqueues
-        by voided element id; outside, fires `switch_representation` directly."""
-        if cls._host_batch_depth > 0:
-            element = tool.Ifc.get_entity(voided_obj)
-            if element is not None:
-                cls._host_recut_queue[element.id()] = (voided_obj, representation)
-            return
-        bonsai.core.geometry.switch_representation(tool.Ifc, cls, obj=voided_obj, representation=representation)
-
-    @classmethod
-    def update_host_representation(cls, voided_obj: bpy.types.Object) -> None:
-        """Run `bim.update_representation` on a host. Inside `batch_host_recut`,
-        enqueues by voided element id; outside, fires the operator directly."""
-        if cls._host_batch_depth > 0:
-            element = tool.Ifc.get_entity(voided_obj)
-            if element is not None:
-                cls._host_update_queue[element.id()] = voided_obj
-            return
-        bpy.ops.bim.update_representation(obj=voided_obj.name)
-
     @classmethod
     def has_axis_representation(cls, element: ifcopenshell.entity_instance) -> bool:
         """True if the element carries a shape representation whose
@@ -237,112 +156,6 @@ class Geometry(bonsai.core.tool.Geometry):
         for modifier in obj.modifiers:
             obj.modifiers.remove(modifier)
 
-    @classmethod
-    def _group_edges_into_loops(cls, edges) -> list[list]:
-        """Group an edge set into connected components by shared vertices.
-
-        Each returned group is a list of edges that share at least one
-        vertex chain. A hollow profile's bisect produces two disjoint
-        loops (outer ring + inner ring) — grouping splits them so each
-        can be filled independently as a separate cap face, rather than
-        ``contextual_create`` welding them into one solid outer face
-        with the inner loop demoted to interior decoration.
-        """
-        edge_set = set(edges)
-        visited: set = set()
-        groups: list[list] = []
-        for start in edges:
-            if start in visited:
-                continue
-            group: list = []
-            stack: list = [start]
-            while stack:
-                e = stack.pop()
-                if e in visited:
-                    continue
-                visited.add(e)
-                group.append(e)
-                for v in e.verts:
-                    for adj in v.link_edges:
-                        if adj in edge_set and adj not in visited:
-                            stack.append(adj)
-            groups.append(group)
-        return groups
-
-    @classmethod
-    def bisect_and_cap(
-        cls,
-        bm,
-        planes_local,
-        *,
-        tag_layer_name: str = "bbim_cap",
-        dist: float = 1e-4,
-        weld_dist: float = 1e-5,
-    ):
-        """Clip ``bm`` against each ``(plane_co, plane_no)`` and fill the cuts.
-
-        Per plane, ``bmesh.ops.bisect_plane(clear_outer=True)`` discards
-        the outside half-space and ``bmesh.ops.contextual_create`` fills
-        the resulting cut edges with cap faces tagged via a BMesh int
-        layer so the tag propagates to any split-children from subsequent
-        planes. After all planes, near-coincident vertices are welded
-        (``weld_dist``) so adjacent caps from the same cross-section
-        merge cleanly.
-
-        Callers are responsible for input mesh quality. Non-watertight
-        inputs (terrain, single-shell surfaces) may produce degenerate
-        cap faces; that's an accepted user-supplied data limitation.
-
-        Returns the cap-tag BMLayerItem, or ``None`` if ``bm`` is empty.
-        """
-        import bmesh
-
-        if not bm.faces:
-            return None
-
-        # Pre-weld nearby verts: T-junctions in messy IFC meshes (a third
-        # vertex sitting in the middle of an edge from a Boolean
-        # operation) make the bisect cut terminate early, leaving open
-        # loops that no fill op can close. Welding the T-junction's
-        # near-coincident vertex into the host edge before bisecting
-        # turns the cut into a closed loop.
-        bmesh.ops.remove_doubles(bm, verts=bm.verts[:], dist=max(weld_dist, 1e-4))
-
-        cap_layer = bm.faces.layers.int.new(tag_layer_name)
-        for plane_co, plane_no in planes_local:
-            geom = bm.verts[:] + bm.edges[:] + bm.faces[:]
-            if not geom:
-                break
-            results = bmesh.ops.bisect_plane(
-                bm,
-                geom=geom,
-                dist=dist,
-                plane_co=plane_co,
-                plane_no=plane_no,
-                clear_outer=True,
-            )
-            cut_edges = [e for e in results["geom_cut"] if isinstance(e, bmesh.types.BMEdge)]
-            if not cut_edges:
-                continue
-            # Group cut edges into connected components BEFORE filling.
-            # Feeding ``contextual_create`` all edges at once (outer +
-            # inner of a hollow profile) makes it create a SINGLE outer
-            # face and treat inner edges as decoration — collapsing the
-            # hole. Filling each connected loop separately produces one
-            # cap face per ring.
-            for loop_edges in cls._group_edges_into_loops(cut_edges):
-                try:
-                    fill = bmesh.ops.contextual_create(bm, geom=loop_edges)
-                except (RuntimeError, TypeError):
-                    continue
-                for f in fill.get("faces", []):
-                    if isinstance(f, bmesh.types.BMFace) and f.is_valid:
-                        f[cap_layer] = 1
-
-        if weld_dist > 0.0:
-            bmesh.ops.remove_doubles(bm, verts=bm.verts[:], dist=weld_dist)
-        return cap_layer
-
     @classmethod
     def clear_scale(cls, obj: bpy.types.Object) -> None:
         """Apply and clear object scale.
@@ -458,38 +271,12 @@ class Geometry(bonsai.core.tool.Geometry):
         bpy.data.objects.remove(obj)
 
     @classmethod
-    def delete_ifc_object(
-        cls,
-        obj: bpy.types.Object,
-        batch_being_deleted_ids: Optional[set[int]] = None,
-    ) -> None:
+    def delete_ifc_object(cls, obj: bpy.types.Object) -> None:
         ifc_file = tool.Ifc.get()
         element = tool.Ifc.get_entity(obj)
         if not element:
             return
-        # Cascade connection-rel teardown — symmetric to bim.disconnect_elements.
-        # When a slab connected to a wall via IfcRelConnectsElements(TOP) is deleted,
-        # the wall's trim booleans + BBIM_Boolean pset would otherwise be orphaned.
-        # skip_elem_recreate is always True here because we're inside delete: the
-        # element is about to vanish, so re-extruding it would be wasted work.
-        # skip_partner_recreate fires only when the partner is also queued in the
-        # same OverrideDelete batch.
-        if element.is_a("IfcRoot"):
-            skip_ids = batch_being_deleted_ids or set()
-            for subject, kind, partner in tool.Connection.find_rels_for_element(element):
-                bonsai.core.connection.disconnect_rel(
-                    tool.Ifc,
-                    tool.Geometry,
-                    tool.Model,
-                    tool.Connection,
-                    subject=subject,
-                    kind=kind,
-                    elem=element,
-                    partner=partner,
-                    skip_elem_recreate=True,
-                    skip_partner_recreate=(partner.id() in skip_ids),
-                )
-        if element.is_a("IfcAnnotation"):
+        elif element.is_a("IfcAnnotation"):
             if element.ObjectType == "DRAWING":
                 return bonsai.core.drawing.remove_drawing(tool.Ifc, tool.Drawing, drawing=element)
             elif tool.Drawing.is_auto_annotation(element):
@@ -854,13 +641,7 @@ class Geometry(bonsai.core.tool.Geometry):
             and isinstance(data, Geometry.TYPES_WITH_MESH_PROPERTIES)
             and (ifc_id := tool.Geometry.get_mesh_props(data).ifc_definition_id)
         ):
-            try:
-                return tool.Ifc.get().by_id(ifc_id)
-            except RuntimeError:
-                # Stale id: a representation rebuild freed the old entity
-                # while obj.data still tracks its id. Treated as "no active
-                # representation" — same contract as a mesh with id 0.
-                return None
+            return tool.Ifc.get().by_id(ifc_id)
 
     @classmethod
     def get_data_representation(cls, data: bpy.types.ID) -> ifcopenshell.entity_instance | None:
@@ -2489,16 +2270,84 @@ class Geometry(bonsai.core.tool.Geometry):
         old_obj_name_to_new_obj_name: dict[str, str] = {}
 
         for obj in objects_to_duplicate:
-            new_active = cls._duplicate_ifc_object_once(
-                obj,
-                active_object,
-                linked,
-                arrays_to_duplicate,
-                old_to_new,
-                old_obj_name_to_new_obj_name,
-            )
-            if new_active is not None:
-                new_active_obj = new_active
+            element = tool.Ifc.get_entity(obj)
+            if element:
+                if element.is_a("IfcAnnotation") and element.ObjectType == "DRAWING":
+                    tool.Blender.deselect_object(obj)
+                    continue  # For now, don't copy drawings until we stabilise a bit more. It's tricky.
+                elif tool.Geometry.is_locked(element):
+                    tool.Blender.deselect_object(obj)
+                    continue
+            elif tool.Geometry.is_representation_item(obj):
+                cls.duplicate_ifc_item(obj)
+                continue
+
+            tracked_opening_type = tool.Model.get_tracked_opening_type(obj)
+            is_tracked_opening = bool(tracked_opening_type)
+            keep_data_linked = linked and not element and not is_tracked_opening
+
+            # Prior to duplicating, sync the object placement to make decomposition recreation more stable.
+            cls.commit_placement_if_moved(obj, apply_scale=False)
+
+            new_obj = obj.copy()
+            temp_data = None
+
+            # Currently for optimization we do not apply pending changes (scale or changed .data)
+            # to the original and duplicated objects.
+            # Keep new object edited if original is.
+            if tool.Ifc.is_edited(obj, ignore_scale=True):
+                tool.Ifc.edit(new_obj)
+
+            if obj.data and not keep_data_linked:
+                # assure root.copy_class won't replace the previous mesh globally
+                temp_data = obj.data.copy()
+                new_obj.data = temp_data
+
+                # Unlink from previous boolean element
+                # and keep object tracked for decorations.
+                if is_tracked_opening:
+                    mprops = tool.Geometry.get_mesh_props(new_obj.data)
+                    mprops.ifc_boolean_id = 0
+                    tool.Root.add_tracked_opening(new_obj, tracked_opening_type)
+
+            if obj == active_object:
+                new_active_obj = new_obj
+            for collection in obj.users_collection:
+                collection.objects.link(new_obj)
+            obj.select_set(False)
+            new_obj.select_set(True)
+            old_obj_name_to_new_obj_name[obj.name] = new_obj.name
+
+            if not element:
+                continue
+
+            # clear object's collection so it will be able to have it's own
+            tool.Blender.get_object_bim_props(new_obj).collection = None
+            # copy the actual class
+            new = bonsai.core.root.copy_class(tool.Ifc, tool.Collector, tool.Geometry, tool.Root, obj=new_obj)
+
+            # clean up the orphaned mesh with ifc id of the original object to avoid confusion
+            # IfcGridAxis keeps the same mesh data (it's pointing to ifc id 0, so it's not a problem)
+            if new and temp_data and not new.is_a("IfcGridAxis"):
+                if new.is_a("IfcRelSpaceBoundary"):
+                    surface = new.ConnectionGeometry.SurfaceOnRelatingElement
+                    temp_data.name = f"0/{surface.id()}"
+                    tool.Ifc.link(surface, temp_data)
+                else:
+                    tool.Blender.remove_data_block(temp_data)
+
+            if new:
+                # TODO: handle array data for other cases of duplication
+                array_data = arrays_to_duplicate.get(obj, None)
+                tool.Model.handle_array_on_copied_element(new, array_data)
+                if array_data:
+                    for child in tool.Array.get_all_children_objects(new):
+                        child.select_set(True)
+
+                # TODO: add new array children to recreate their decomposition too
+                old_to_new[element] = [new]
+                if new.is_a("IfcRelSpaceBoundary"):
+                    tool.Boundary.decorate_boundary(new_obj)
 
         # Remap Blender parent relationships for duplicated objects
         for old_obj_name, new_obj_name in old_obj_name_to_new_obj_name.items():
@@ -2526,211 +2375,10 @@ class Geometry(bonsai.core.tool.Geometry):
         # Recreate decompositions
         tool.Duplicate.recreate_decompositions(decomposition_relationships, old_to_new)
         cls.remove_linked_aggregate_data(old_to_new)
-
-        # In-loop regenerate_wall runs before recreate_connections, so any new
-        # walls that just received an IfcRelConnectsPathElements have stale
-        # junction geometry — recalculate them now that their connection graph
-        # is complete.
-        cls._recalculate_walls_with_new_connections(old_to_new)
-
         bonsai.bim.handler.refresh_ui_data()
         tool.Root.reload_grid_decorator()
         return old_to_new, new_active_obj or active_object
 
-    @classmethod
-    def duplicate_ifc_object_n_times(
-        cls, source: bpy.types.Object, count: int
-    ) -> dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]]:
-        """N-way duplicate of a single source.
-
-        Same per-copy semantics as duplicate_ifc_objects (IFC class copy,
-        decomposition + connection recreation, body regen for walls), but
-        bypasses the set() dedupe and the arrays_to_duplicate pre-scan so
-        callers building a fresh array don't pay per-call overhead N times.
-        Returns the same old_to_new dict shape, with the source element
-        mapping to the N new entities."""
-        if count <= 0:
-            return {}
-
-        sources = {source}
-        decomposition_relationships = tool.Duplicate.get_decomposition_relationships(sources)
-        connection_relationships = tool.Duplicate.get_connection_relationships(sources)
-        port_connection_snapshot = tool.Duplicate.get_port_connection_relationships(sources)
-        old_to_new: dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]] = {}
-        old_obj_name_to_new_obj_name: dict[str, str] = {}
-
-        for _ in range(count):
-            cls._duplicate_ifc_object_once(
-                source,
-                None,
-                False,
-                {},
-                old_to_new,
-                old_obj_name_to_new_obj_name,
-                keep_source_selected=True,
-            )
-
-        for old_obj_name, new_obj_name in old_obj_name_to_new_obj_name.items():
-            new_obj = bpy.data.objects.get(new_obj_name)
-            if new_obj and new_obj.parent and new_obj.parent.name in old_obj_name_to_new_obj_name:
-                world_matrix = new_obj.matrix_world.copy()
-                new_parent_name = old_obj_name_to_new_obj_name[new_obj.parent.name]
-                new_parent = bpy.data.objects.get(new_parent_name)
-                if new_parent:
-                    new_obj.parent = new_parent
-                    new_obj.matrix_world = world_matrix
-
-        for old in old_to_new.keys():
-            if old.is_a("IfcElementAssembly"):
-                tool.Root.recreate_aggregate(old_to_new)
-
-        cls.remove_old_connections(old_to_new)
-        tool.Duplicate.recreate_connections(connection_relationships, old_to_new)
-        tool.Duplicate.recreate_port_connections(port_connection_snapshot, old_to_new)
-        tool.Duplicate.recreate_decompositions(decomposition_relationships, old_to_new)
-        cls.remove_linked_aggregate_data(old_to_new)
-        cls._recalculate_walls_with_new_connections(old_to_new)
-        bonsai.bim.handler.refresh_ui_data()
-        tool.Root.reload_grid_decorator()
-        return old_to_new
-
-    @classmethod
-    def _duplicate_ifc_object_once(
-        cls,
-        obj: bpy.types.Object,
-        active_object: Optional[bpy.types.Object],
-        linked: bool,
-        arrays_to_duplicate: dict[bpy.types.Object, Any],
-        old_to_new: dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]],
-        old_obj_name_to_new_obj_name: dict[str, str],
-        keep_source_selected: bool = False,
-    ) -> Optional[bpy.types.Object]:
-        """Per-source body of the duplicate flow. Mutates old_to_new and
-        old_obj_name_to_new_obj_name in place. Returns new_obj when obj is
-        the active_object, else None.
-
-        keep_source_selected: when True, skip the source deselect so batched
-        callers can run N iterations without N×2 select flips and without
-        needing a post-loop restore on the source."""
-        new_active_obj: Optional[bpy.types.Object] = None
-        element = tool.Ifc.get_entity(obj)
-        if element:
-            if element.is_a("IfcAnnotation") and element.ObjectType == "DRAWING":
-                tool.Blender.deselect_object(obj)
-                return None  # For now, don't copy drawings until we stabilise a bit more. It's tricky.
-            elif tool.Geometry.is_locked(element):
-                tool.Blender.deselect_object(obj)
-                return None
-        elif tool.Geometry.is_representation_item(obj):
-            cls.duplicate_ifc_item(obj)
-            return None
-
-        tracked_opening_type = tool.Model.get_tracked_opening_type(obj)
-        is_tracked_opening = bool(tracked_opening_type)
-        keep_data_linked = linked and not element and not is_tracked_opening
-
-        # Prior to duplicating, sync the object placement to make decomposition recreation more stable.
-        cls.commit_placement_if_moved(obj, apply_scale=False)
-
-        new_obj = obj.copy()
-        temp_data = None
-
-        # Currently for optimization we do not apply pending changes (scale or changed .data)
-        # to the original and duplicated objects.
-        # Keep new object edited if original is.
-        if tool.Ifc.is_edited(obj, ignore_scale=True):
-            tool.Ifc.edit(new_obj)
-
-        if obj.data and not keep_data_linked:
-            # assure root.copy_class won't replace the previous mesh globally
-            temp_data = obj.data.copy()
-            new_obj.data = temp_data
-
-            # Unlink from previous boolean element
-            # and keep object tracked for decorations.
-            if is_tracked_opening:
-                mprops = tool.Geometry.get_mesh_props(new_obj.data)
-                mprops.ifc_boolean_id = 0
-                tool.Root.add_tracked_opening(new_obj, tracked_opening_type)
-
-        if obj == active_object:
-            new_active_obj = new_obj
-        for collection in obj.users_collection:
-            collection.objects.link(new_obj)
-        if not keep_source_selected:
-            obj.select_set(False)
-        new_obj.select_set(True)
-        old_obj_name_to_new_obj_name[obj.name] = new_obj.name
-
-        if not element:
-            return new_active_obj
-
-        # clear object's collection so it will be able to have it's own
-        tool.Blender.get_object_bim_props(new_obj).collection = None
-        # copy the actual class
-        new = bonsai.core.root.copy_class(tool.Ifc, tool.Collector, tool.Geometry, tool.Root, obj=new_obj)
-
-        # clean up the orphaned mesh with ifc id of the original object to avoid confusion
-        # IfcGridAxis keeps the same mesh data (it's pointing to ifc id 0, so it's not a problem)
-        if new and temp_data and not new.is_a("IfcGridAxis"):
-            if new.is_a("IfcRelSpaceBoundary"):
-                surface = new.ConnectionGeometry.SurfaceOnRelatingElement
-                temp_data.name = f"0/{surface.id()}"
-                tool.Ifc.link(surface, temp_data)
-            else:
-                tool.Blender.remove_data_block(temp_data)
-
-        if new:
-            # TODO: handle array data for other cases of duplication
-            array_data = arrays_to_duplicate.get(obj, None)
-            tool.Model.handle_array_on_copied_element(new, array_data)
-            if array_data:
-                for child in tool.Array.get_all_children_objects(new):
-                    child.select_set(True)
-
-            # TODO: add new array children to recreate their decomposition too
-            old_to_new.setdefault(element, []).append(new)
-            if new.is_a("IfcRelSpaceBoundary"):
-                tool.Boundary.decorate_boundary(new_obj)
-            # Slab-trim booleans (from extend_walls_to_underside) belong to
-            # the source wall's connection, not the copy. Strip them so the
-            # duplicate reverts to its pre-clip extrusion — mirrors the way
-            # filling rels are dropped while manual booleans persist on copy.
-            # Reload the body when something was stripped so the viewport
-            # immediately shows the unclipped geometry; otherwise the user
-            # sees a stale mesh until they Shift+G, which is easy to miss.
-            if new.is_a("IfcWall"):
-                if tool.Model.strip_underside_booleans(new):
-                    tool.Model.reload_body_representation(new_obj)
-                # HasOpenings rels don't follow object duplication, so
-                # the duplicate's body must rebuild to match its current
-                # opening set.
-                else:
-                    tool.Model.regenerate_wall(new_obj)
-
-        return new_active_obj
-
-    @classmethod
-    def _recalculate_walls_with_new_connections(
-        cls, old_to_new: dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]]
-    ) -> None:
-        """Recalculate new IfcWall duplicates that just received an
-        ``IfcRelConnectsPathElements``. The in-loop ``regenerate_wall`` runs
-        before ``recreate_connections``, so wall body geometry doesn't reflect
-        the junction until this second pass."""
-        walls_to_recalc: list[bpy.types.Object] = []
-        for new_list in old_to_new.values():
-            for new_entity in new_list:
-                if not new_entity.is_a("IfcWall"):
-                    continue
-                if not (getattr(new_entity, "ConnectedTo", None) or getattr(new_entity, "ConnectedFrom", None)):
-                    continue
-                new_obj = tool.Ifc.get_object(new_entity)
-                if new_obj is not None:
-                    walls_to_recalc.append(new_obj)
-        if walls_to_recalc:
-            tool.Model.recalculate_walls(walls_to_recalc)
-
     @classmethod
     def duplicate_ifc_item(cls, obj: bpy.types.Object) -> None:
         props = tool.Geometry.get_geometry_props()
@@ -2782,10 +2430,7 @@ class Geometry(bonsai.core.tool.Geometry):
             pset = ifcopenshell.util.element.get_pset(element, "BBIM_Array")
             if not pset:
                 continue
-            try:
-                array_parents.add(tool.Ifc.get().by_guid(pset["Parent"]))
-            except RuntimeError:
-                continue
+            array_parents.add(tool.Ifc.get().by_guid(pset["Parent"]))
 
         for array_parent in array_parents:
             array_parent_obj = tool.Ifc.get_object(array_parent)

src/bonsai/bonsai/tool/ifcgit.py

@@ -29,7 +29,6 @@ from typing import TYPE_CHECKING, Any, Union
 
 import bpy
 
-import bonsai.core.tool
 import bonsai.tool as tool
 from bonsai.bim import import_ifc
 from bonsai.bim.ifc import IfcStore
@@ -51,7 +50,7 @@ if TYPE_CHECKING:
     from bonsai.bim.module.ifcgit.prop import IfcGitProperties
 
 
-class IfcGit(bonsai.core.tool.IfcGit):
+class IfcGit:
     STEP_IDS = dict[str, set[int]]
 
     @classmethod

src/bonsai/bonsai/tool/loader.py

@@ -189,7 +189,7 @@ class Loader(bonsai.core.tool.Loader):
                 uv_mode = "Generated"
             elif coordinates.is_a("IfcTextureCoordinateGenerator") and coordinates.Mode == "COORD-EYE":
                 uv_mode = "Camera"
-        surface_texture["uv_mode"] = uv_mode or "UV"
+        surface_texture["uv_mode"] = uv_mode or "Generated"
         return surface_texture
 
     @classmethod
@@ -315,7 +315,7 @@ class Loader(bonsai.core.tool.Loader):
                     image_url = str(image_url)
                     if is_relative and bpy.data.filepath:
                         image_url = bpy.path.relpath(image_url)
-                    return bpy.data.images.load(image_url, check_existing=True)
+                    return bpy.data.images.load(image_url)
 
                 elif texture["type"] == "IfcBlobTexture":
                     # https://blender.stackexchange.com/questions/173206/how-to-efficiently-convert-a-pil-image-to-bpy-types-image
@@ -472,23 +472,12 @@ class Loader(bonsai.core.tool.Loader):
                         print(f"{mode} Mode texture will be skipped.")
                     continue
 
-                if (image := get_image()) is None:
+                if (image := get_image) is None:
                     continue
 
-                # Replace whatever currently feeds the FLAT color input (RGB or previous texture chain).
-                for link in list(bsdf.inputs[2].links):
-                    prev_node = link.from_node
-                    blender_material.node_tree.links.remove(link)
-                    if prev_node.type == "TEX_IMAGE":
-                        # Remove linked texture coordinate node if it's no longer used.
-                        for vec_link in list(prev_node.inputs["Vector"].links):
-                            coord_node = vec_link.from_node
-                            blender_material.node_tree.links.remove(vec_link)
-                            if coord_node.type == "TEX_COORD" and not any(o.links for o in coord_node.outputs):
-                                blender_material.node_tree.nodes.remove(coord_node)
-                        blender_material.node_tree.nodes.remove(prev_node)
-                    elif prev_node.type == "RGB":
-                        blender_material.node_tree.nodes.remove(prev_node)
+                # remove RGB node from `create_surface_style_rendering`
+                prev_node = bsdf.inputs[2].links[0].from_node
+                blender_material.node_tree.nodes.remove(prev_node)
 
                 node = blender_material.node_tree.nodes.new(type="ShaderNodeTexImage")
                 node.location = bsdf.location - Vector((200, 250))

src/bonsai/bonsai/tool/model.py

@@ -59,7 +59,6 @@ from ifcopenshell.util.shape_builder import ShapeBuilder, np_to_3d
 from mathutils import Matrix, Vector
 
 import bonsai.core.geometry
-import bonsai.core.model
 import bonsai.core.tool
 import bonsai.tool as tool
 from bonsai.bim import import_ifc
@@ -83,7 +82,6 @@ if TYPE_CHECKING:
         BIMPolylineProperties,
         BIMRailingProperties,
         BIMRoofProperties,
-        BIMSlabProperties,
         BIMStairProperties,
         BIMSverchokProperties,
         BIMWallProperties,
@@ -120,10 +118,6 @@ class Model(bonsai.core.tool.Model):
     def get_railing_props(cls, obj: bpy.types.Object) -> BIMRailingProperties:
         return obj.BIMRailingProperties  # pyright: ignore[reportAttributeAccessIssue]
 
-    @classmethod
-    def get_slab_props(cls, obj: bpy.types.Object) -> BIMSlabProperties:
-        return obj.BIMSlabProperties  # pyright: ignore[reportAttributeAccessIssue]
-
     @classmethod
     def get_pipe_segment_props(cls, obj: bpy.types.Object) -> BIMPipeSegmentProperties:
         return obj.BIMPipeSegmentProperties  # pyright: ignore[reportAttributeAccessIssue]
@@ -815,7 +809,7 @@ class Model(bonsai.core.tool.Model):
         unit_scale = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
         layer_params = tool.Model.get_material_layer_parameters(element)
         layer_offset = layer_params["offset"]
-        thickness = layer_params["thickness"]
+        thickness = layer_params["thickness"] / unit_scale
         props = tool.Material.get_object_material_props(obj)
 
         # Try to load from pset if not already in props
@@ -823,7 +817,7 @@ class Model(bonsai.core.tool.Model):
             pset = ifcopenshell.util.element.get_pset(element, "BBIM_MaterialLayer")
             if pset and pset.get("UseCustomOffset", False):
                 # Load from pset
-                custom_offset = pset.get("CustomOffset", 0.0) * unit_scale
+                custom_offset = pset.get("CustomOffset", 0.0)
                 usage_type = tool.Model.get_usage_type(element)
 
                 if usage_type == "LAYER2":
@@ -836,7 +830,7 @@ class Model(bonsai.core.tool.Model):
                 return None
         else:
             # Use current props
-            custom_offset = props.custom_offset
+            custom_offset = props.custom_offset / unit_scale
             if tool.Model.get_usage_type(element) == "LAYER2":
                 custom_offset_reference = props.custom_wall_reference
             elif tool.Model.get_usage_type(element) == "LAYER3":
@@ -847,17 +841,17 @@ class Model(bonsai.core.tool.Model):
         direction_sense = layer_params["direction_sense"]
 
         if direction_sense == "POSITIVE" and custom_offset_reference in {"INTERIOR", "TOP"}:
-            layer_offset = custom_offset - thickness
+            layer_offset = custom_offset - thickness * unit_scale
         if direction_sense == "POSITIVE" and custom_offset_reference in {"CENTER", "MIDDLE"}:
-            layer_offset = custom_offset - (thickness / 2)
+            layer_offset = custom_offset - (thickness / 2) * unit_scale
         if (direction_sense == "POSITIVE" and custom_offset_reference in {"EXTERIOR", "BOTTOM"}) or (
             direction_sense == "NEGATIVE" and custom_offset_reference in {"EXTERIOR", "TOP"}
         ):
             layer_offset = custom_offset
         if direction_sense == "NEGATIVE" and custom_offset_reference in {"CENTER", "MIDDLE"}:
-            layer_offset = custom_offset + (thickness / 2)
+            layer_offset = custom_offset + (thickness / 2) * unit_scale
         if direction_sense == "NEGATIVE" and custom_offset_reference in {"INTERIOR", "BOTTOM"}:
-            layer_offset = custom_offset + thickness
+            layer_offset = custom_offset + thickness * unit_scale
 
         return layer_offset / unit_scale
 
@@ -910,46 +904,6 @@ class Model(bonsai.core.tool.Model):
         """Return True if element has an IfcRelConnectsElements(TOP) relationship."""
         return any(rel.is_a("IfcRelConnectsElements") and rel.Description == "TOP" for rel in element.ConnectedFrom)
 
-    @classmethod
-    def strip_underside_booleans(cls, wall: ifcopenshell.entity_instance) -> bool:
-        """Remove slab-trim ``IfcBooleanResult`` items from a wall's body chain.
-
-        Returns ``True`` if any boolean was removed, so the caller knows whether
-        a Blender-side body reload is needed to surface the geometry change.
-
-        Hook for the duplicate path (Shift+D): the source wall's clip booleans
-        don't make sense on a copy pulled away from the slab. Booleans whose
-        ``SecondOperand.is_a("IfcTessellatedFaceSet")`` are removed — same
-        imprecise discriminator the rest of the wall-to-underside machinery
-        uses (manual cuts authored from tessellated meshes would also be
-        stripped, but most manual cuts use ``IfcExtrudedAreaSolid`` / CSG
-        primitives and are unaffected).
-
-        Cannot reuse ``remove_wall_to_underside_booleans`` here because the
-        duplicate's ``BBIM_Boolean.Data`` holds the source wall's stale ids —
-        ``get_manual_booleans`` returns empty on the copy and the helper
-        early-returns. The duplicate hook works directly off the chain.
-        """
-        representation = tool.Geometry.get_body_representation(wall)
-        if not representation:
-            return False
-        chain = cls.get_booleans(wall, representation)
-        to_remove = [b for b in chain if (sec := b.SecondOperand) is not None and sec.is_a("IfcTessellatedFaceSet")]
-        for b in to_remove:
-            tool.Geometry.remove_representation_item(b.SecondOperand, wall)
-        # Sweep the now-stale BBIM_Boolean entries on the copy (their ids point
-        # at booleans that were never in this wall's chain — they survived the
-        # ifcopenshell deep copy as JSON text in the pset payload).
-        pset_data = ifcopenshell.util.element.get_pset(wall, "BBIM_Boolean")
-        if pset_data:
-            representation = tool.Geometry.get_body_representation(wall)
-            chain_ids = {b.id() for b in cls.get_booleans(wall, representation)} if representation else set()
-            stored_ids = set(json.loads(pset_data["Data"]))
-            stale_ids = stored_ids - chain_ids
-            if stale_ids:
-                cls.unmark_manual_booleans(wall, list(stale_ids))
-        return bool(to_remove)
-
     @classmethod
     def remove_wall_to_underside_booleans(cls, wall: ifcopenshell.entity_instance) -> None:
         """Remove all IfcBooleanResult items previously added by extend_walls_to_underside."""
@@ -1245,42 +1199,6 @@ class Model(bonsai.core.tool.Model):
         cls, parent_obj: bpy.types.Object, data: list[dict[str, Any]], array_layers_to_apply: Iterable[int] = tuple()
     ) -> None:
         """`array_layers_to_apply` - list of array layer indices to apply"""
-        with tool.Geometry.batch_host_recut():
-            cls._regenerate_array_body(parent_obj, data, array_layers_to_apply)
-
-    @classmethod
-    def _prune_orphan_array_children(cls, array: dict[str, Any]) -> None:
-        """Drop GUIDs from ``array['children']`` whose IFC entity or Blender
-        object is no longer alive, and cascade-remove the orphan IFC entity
-        if it still exists. Outliner / keyboard delete of a Bonsai-managed
-        object bypasses ``bim.delete``'s cascade, leaving dangling opening
-        and filling references that later confuse regen and crash the
-        ``batch_host_recut`` drain."""
-        live_guids: list[str] = []
-        ifc_file = tool.Ifc.get()
-        for guid in array["children"]:
-            try:
-                element = ifc_file.by_guid(guid)
-            except RuntimeError:
-                continue
-            obj = tool.Ifc.get_object(element)
-            try:
-                is_live = obj is not None and obj.data is not None
-            except ReferenceError:
-                is_live = False
-            if is_live:
-                live_guids.append(guid)
-                continue
-            try:
-                ifcopenshell.api.root.remove_product(ifc_file, product=element)
-            except (RuntimeError, ifcopenshell.Error):
-                pass
-        array["children"] = live_guids
-
-    @classmethod
-    def _regenerate_array_body(
-        cls, parent_obj: bpy.types.Object, data: list[dict[str, Any]], array_layers_to_apply: Iterable[int]
-    ) -> None:
         parent_element = tool.Ifc.get_entity(parent_obj)
 
         if pset := ifcopenshell.util.element.get_pset(parent_element, "BBIM_Array"):
@@ -1292,7 +1210,6 @@ class Model(bonsai.core.tool.Model):
         obj_stack = [parent_obj]
 
         for array_i, array in enumerate(data):
-            cls._prune_orphan_array_children(array)
             child_i = 0
             existing_children = set(array["children"])
             total_existing_children = len(array["children"])
@@ -1306,14 +1223,6 @@ class Model(bonsai.core.tool.Model):
             else:
                 base_offset = Vector([array["x"], array["y"], array["z"]]) * unit_scale
 
-            target_new_in_this_layer = (array["count"] - 1) * len(obj_stack)
-            missing_count = max(0, target_new_in_this_layer - total_existing_children)
-            new_entities_pool: list[ifcopenshell.entity_instance] = []
-            if missing_count > 0:
-                batch_old_to_new = tool.Geometry.duplicate_ifc_object_n_times(parent_obj, missing_count)
-                new_entities_pool = batch_old_to_new.get(parent_element, [])
-            new_entities_iter = iter(new_entities_pool)
-
             for i in range(array["count"]):
                 if i == 0:
                     continue
@@ -1331,13 +1240,8 @@ class Model(bonsai.core.tool.Model):
                         child_obj = tool.Ifc.get_object(child_element)
                         assert child_obj
                     except (IndexError, RuntimeError, AssertionError):
-                        try:
-                            child_element = next(new_entities_iter)
-                        except StopIteration:
-                            # Stale-GUID mid-list left the pool exhausted; fall back
-                            # to a one-off duplicate so the layer can still complete.
-                            old_to_new, _ = tool.Geometry.duplicate_ifc_objects([parent_obj])
-                            child_element = next(iter(old_to_new.values()))[0]
+                        old_to_new, _ = tool.Geometry.duplicate_ifc_objects([parent_obj])
+                        child_element = next(iter(old_to_new.values()))[0]
                         child_obj = tool.Ifc.get_object(child_element)
 
                     # add child pset
@@ -1371,10 +1275,7 @@ class Model(bonsai.core.tool.Model):
             # handle elements unused in the array after regeneration
             removed_children = set(existing_children) - set(array["children"])
             for removed_child in removed_children:
-                try:
-                    element = tool.Ifc.get().by_guid(removed_child)
-                except RuntimeError:
-                    continue
+                element = tool.Ifc.get().by_guid(removed_child)
                 # Strip any wall/slab opening cut by this child before deletion,
                 # so the host's HasOpenings shrinks symmetrically with count.
                 if getattr(element, "FillsVoids", None):
@@ -1405,7 +1306,14 @@ class Model(bonsai.core.tool.Model):
             tool.Ifc.get(), pset=pset, properties={"Data": json_data, "Parent": parent_element.GlobalId}
         )
 
-        tool.Blender.set_object_selection(parent_obj, True)
+        # Post-condition: parent is selected on return. duplicate_ifc_objects
+        # deselects the source on every call inside the regen loop; without
+        # this restore, callers get a deselected parent for arrays with N >= 2.
+        # TODO: batch the per-child duplicate_ifc_objects([parent]) calls into
+        # a single N-way duplicate — N depsgraph churns + N select/deselect
+        # flips is wasteful, and a batched duplicate would also remove the
+        # need for this restore.
+        parent_obj.select_set(True)
 
     @classmethod
     def mirror_parent_void_fillings_to_children(
@@ -1486,7 +1394,9 @@ class Model(bonsai.core.tool.Model):
             representation = tool.Geometry.get_representation_by_context(voided_element, context)
             if representation is None:
                 continue
-            tool.Geometry.recut_host(voided_obj, representation)
+            bonsai.core.geometry.switch_representation(
+                tool.Ifc, tool.Geometry, obj=voided_obj, representation=representation
+            )
 
     @classmethod
     def unshare_opening_representation(cls, filling: ifcopenshell.entity_instance) -> None:
@@ -2097,86 +2007,47 @@ class Model(bonsai.core.tool.Model):
         return (vertices, edges, faces)
 
     @classmethod
-    def regenerate_filling_opening_body(cls, filling: ifcopenshell.entity_instance) -> Optional[bpy.types.Object]:
-        """Regenerate only the mapped source used by ``filling``'s opening so
-        it matches ``filling``'s current parametric dimensions.
-
-        Returns the voided host Blender object so the caller can recut it,
-        or ``None`` if ``filling`` has no opening to refresh or the host is
-        an aggregate (no mesh data to recut against)."""
+    def update_simple_openings(cls, element: ifcopenshell.entity_instance) -> None:
         from bonsai.bim.module.model.opening import FilledOpeningGenerator
 
-        if not filling.FillsVoids:
-            return None
-
         ifc_file = tool.Ifc.get()
-        opening = filling.FillsVoids[0].RelatingOpeningElement
-        voided_obj = tool.Ifc.get_object(opening.VoidsElements[0].RelatingBuildingElement)
-        if voided_obj is None or voided_obj.data is None:
-            return None
+        fillings = {e: tool.Ifc.get_object(e) for e in tool.Array.get_parametric_propagation_targets(element)}
 
-        old_representation = tool.Geometry.get_body_representation(opening)
-        if old_representation is None:
-            return voided_obj
-        old_representation = tool.Geometry.resolve_mapped_representation(old_representation)
-
-        ifcopenshell.api.geometry.unassign_representation(ifc_file, product=opening, representation=old_representation)
-
-        filling_obj = tool.Ifc.get_object(filling)
-        new_representation = FilledOpeningGenerator().generate_opening_from_filling(
-            filling, filling_obj, voided_obj.dimensions[1]
-        )
-
-        for inverse in ifc_file.get_inverse(old_representation):
-            ifcopenshell.util.element.replace_attribute(inverse, old_representation, new_representation)
-
-        ifcopenshell.api.geometry.remove_representation(ifc_file, representation=old_representation)
-
-        return voided_obj
-
-    @classmethod
-    def regenerate_simple_opening_bodies(cls, element: ifcopenshell.entity_instance) -> set:
-        """Regenerate every distinct mapped opening source within ``element``'s
-        type-occurrence family so each one matches the family's current
-        parametric dimensions.
-
-        Most occurrences share a single mapped source — refreshing it once
-        propagates to every filling via inverse-substitution. Some families,
-        especially those imported from foreign authoring tools, fragment into
-        several mapped sources for the same type; dedup is by source id so
-        every distinct source gets one refresh. Returns the set of Blender
-        objects whose host representation needs a viewport-level recut
-        (callers handle the recut themselves)."""
-        ifc_file = tool.Ifc.get()
-        fillings = list(tool.Array.get_parametric_propagation_targets(element))
-
-        voided_objs: set = set()
-        seen_source_ids: set[int] = set()
+        voided_objs = set()
+        has_replaced_opening_representation = False
         for filling in fillings:
             if not filling.FillsVoids:
                 continue
 
             opening = filling.FillsVoids[0].RelatingOpeningElement
             voided_obj = tool.Ifc.get_object(opening.VoidsElements[0].RelatingBuildingElement)
-            if voided_obj is not None:
-                voided_objs.add(voided_obj)
+            voided_objs.add(voided_obj)
 
-            body = tool.Geometry.get_body_representation(opening)
-            if body is None:
+            # We assume all occurrences of the same element type (e.g. a window)
+            # will use openings of the same thickness.
+            # Generator we use by default will create a really thick opening representation
+            # to make sure it will fit for walls with different thickness.
+            if has_replaced_opening_representation:
                 continue
-            source = tool.Geometry.resolve_mapped_representation(body)
-            if source.id() in seen_source_ids:
-                continue
-            seen_source_ids.add(source.id())
 
-            cls.regenerate_filling_opening_body(filling)
+            old_representation = ifcopenshell.util.representation.get_representation(
+                opening, "Model", "Body", "MODEL_VIEW"
+            )
+            old_representation = tool.Geometry.resolve_mapped_representation(old_representation)
+            ifcopenshell.api.geometry.unassign_representation(
+                ifc_file, product=opening, representation=old_representation
+            )
 
-        return voided_objs
+            new_representation = FilledOpeningGenerator().generate_opening_from_filling(
+                filling, fillings[filling], voided_obj.dimensions[1]
+            )
 
-    @classmethod
-    def update_simple_openings(cls, element: ifcopenshell.entity_instance) -> None:
-        voided_objs = cls.regenerate_simple_opening_bodies(element)
-        fillings = {e: tool.Ifc.get_object(e) for e in tool.Array.get_parametric_propagation_targets(element)}
+            for inverse in ifc_file.get_inverse(old_representation):
+                ifcopenshell.util.element.replace_attribute(inverse, old_representation, new_representation)
+
+            ifcopenshell.api.geometry.remove_representation(ifc_file, representation=old_representation)
+
+            has_replaced_opening_representation = True
 
         tool.Model.reload_body_representation(voided_objs)
         if fillings:
@@ -3139,9 +3010,6 @@ class Model(bonsai.core.tool.Model):
             regenerate_fillet_corner_wall(element, obj)
             return
         rep = ifcopenshell.api.geometry.regenerate_wall_representation(tool.Ifc.get(), element)
-        if rep is None:
-            # Wall has no IfcMaterialLayerSet — layer-set rebuild not applicable.
-            return
         bonsai.core.geometry.switch_representation(
             tool.Ifc,
             tool.Geometry,
@@ -3156,19 +3024,6 @@ class Model(bonsai.core.tool.Model):
         obj.matrix_world = tool.Loader.apply_blender_offset_to_matrix_world(obj, matrix)
         tool.Geometry.record_object_position(obj)
 
-    @classmethod
-    def regenerate_wall(cls, obj: bpy.types.Object) -> None:
-        """Rebuild a wall's body from current IFC state: extrusion + openings
-        first, then re-clip to any surviving ``IfcRelConnectsElements(TOP)``
-        slab. Safe on walls with no openings and no slab connection — both
-        steps no-op against their preconditions."""
-        element = tool.Ifc.get_entity(obj)
-        if element is None:
-            return
-        cls.recreate_wall(element, obj)
-        if cls.has_underside_connection(element):
-            bonsai.core.model.regenerate_wall_to_underside(tool.Ifc, tool.Geometry, cls, [obj])
-
     @classmethod
     def recalculate_walls(cls, walls: list[bpy.types.Object]) -> None:
         queue: set[tuple[ifcopenshell.entity_instance, bpy.types.Object]] = set()
@@ -3184,26 +3039,6 @@ class Model(bonsai.core.tool.Model):
                 obj = tool.Ifc.get_object(rel.RelatingElement)
                 tool.Geometry.commit_placement_if_moved(obj)
                 queue.add((rel.RelatingElement, obj))
-
-        # Sync filling and opening placements so subsequent wall recuts
-        # operate on the up-to-date opening positions — a filling moved
-        # along the wall's reference line otherwise stays cut at its old
-        # spot.
-        for element, wall in queue:
-            if not wall:
-                continue
-            for rel in getattr(element, "HasOpenings", []) or []:
-                opening = rel.RelatedOpeningElement
-                for fill_rel in getattr(opening, "HasFillings", []) or []:
-                    filling = fill_rel.RelatedBuildingElement
-                    filling_obj = tool.Ifc.get_object(filling)
-                    if filling_obj is None or not tool.Ifc.is_moved(filling_obj):
-                        continue
-                    bonsai.core.geometry.edit_object_placement(tool.Ifc, tool.Geometry, tool.Surveyor, obj=filling_obj)
-                    ifcopenshell.api.geometry.edit_object_placement(
-                        tool.Ifc.get(), product=opening, matrix=filling_obj.matrix_world
-                    )
-
         for element, wall in queue:
             if not wall:
                 continue

src/bonsai/bonsai/tool/parametric.py

@@ -81,19 +81,11 @@ class ParametricObject:
     ``_cancel_targets``) and that therefore wire their operators through
     ``build_edit_lifecycle``. Entries with bespoke edit lifecycles (per-attribute
     diff dispatch, layer-stack editing, mid-spline gizmo drag) leave this
-    False and declare their operator classes directly.
-
-    ``has_default_parameters`` marks entries whose ``BIM<Name>Properties``
-    class exposes ``get_general_kwargs`` / ``copy_to`` and a matching
-    ``draw_<name>_properties`` UI helper, so the addon-preferences panel can
-    surface a per-type defaults section and the create operator can seed new
-    instances from the preset. Entries without that machinery leave this False
-    and don't appear in the preferences ``Default Parameters`` panel."""
+    False and declare their operator classes directly."""
 
     name: str
     has_non_editable_path: bool = False
     supports_build_edit_lifecycle: bool = False
-    has_default_parameters: bool = False
 
     def __post_init__(self) -> None:
         if not _VALID_NAME_RE.match(self.name):
@@ -156,22 +148,15 @@ class Parametric(bonsai.core.tool.Parametric):
             self._gen = None
 
     EDIT_TYPES: list[ParametricObject] = [
-        ParametricObject(
-            "door", has_non_editable_path=True, supports_build_edit_lifecycle=True, has_default_parameters=True
-        ),
-        ParametricObject(
-            "window", has_non_editable_path=True, supports_build_edit_lifecycle=True, has_default_parameters=True
-        ),
-        ParametricObject(
-            "stair", has_non_editable_path=True, supports_build_edit_lifecycle=True, has_default_parameters=True
-        ),
-        ParametricObject("railing", supports_build_edit_lifecycle=True, has_default_parameters=True),
-        ParametricObject("roof", supports_build_edit_lifecycle=True, has_default_parameters=True),
+        ParametricObject("door", has_non_editable_path=True, supports_build_edit_lifecycle=True),
+        ParametricObject("window", has_non_editable_path=True, supports_build_edit_lifecycle=True),
+        ParametricObject("stair", has_non_editable_path=True, supports_build_edit_lifecycle=True),
+        ParametricObject("railing", supports_build_edit_lifecycle=True),
+        ParametricObject("roof", supports_build_edit_lifecycle=True),
         ParametricObject("array", supports_build_edit_lifecycle=True),
         ParametricObject("pipe_segment", supports_build_edit_lifecycle=True),
         ParametricObject("duct_segment", supports_build_edit_lifecycle=True),
         ParametricObject("wall"),
-        ParametricObject("slab"),
     ]
 
     # Annotations for the uppercase constants populated from ``EDIT_TYPES`` by
@@ -186,7 +171,6 @@ class Parametric(bonsai.core.tool.Parametric):
     PIPE_SEGMENT: ClassVar[ParametricObject]
     DUCT_SEGMENT: ClassVar[ParametricObject]
     WALL: ClassVar[ParametricObject]
-    SLAB: ClassVar[ParametricObject]
 
     _geom_generation: int = 0
 
@@ -475,15 +459,6 @@ class Parametric(bonsai.core.tool.Parametric):
             return False
         return tool.Pset.get_element_pset(element, "BBIM_Stair") is not None
 
-    @classmethod
-    def is_slab(cls, element: entity_instance) -> bool:
-        """``True`` for any ``IfcSlab``. The slab edit lifecycle only gates
-        the connection-disconnect UI — no IFC mutation — so we don't narrow
-        further (e.g. by checking for wall connections). Per-gizmo polls
-        layer the "has wall connections" check on top via
-        ``tool.Wall.iter_slab_wall_connections``."""
-        return element is not None and element.is_a("IfcSlab")
-
     @classmethod
     def is_wall(cls, element: entity_instance) -> bool:
         """A wall is editable by the parametric gizmo if it is an IfcWall with LAYER2 usage.

src/bonsai/bonsai/tool/patch.py

@@ -18,33 +18,18 @@
 
 from __future__ import annotations
 
-import re
 from typing import TYPE_CHECKING, Any
 
 import bpy
 import ifcopenshell
-import ifcopenshell.util.schema
 import ifcpatch
 
 import bonsai.core.tool
-import bonsai.tool
 
 if TYPE_CHECKING:
     from bonsai.bim.module.patch.prop import BIMPatchProperties
 
 
-# Lower index = older schema. Used to detect downgrades vs upgrades.
-_SCHEMA_AGE = {"IFC2X3": 0, "IFC4": 1, "IFC4X3": 2}
-
-# Pretty-printed argument name for the ``Migrate`` recipe's schema parameter
-# (see UpdateIfcPatchArguments.pretty_arg_name in bim/module/patch/operator.py).
-_MIGRATE_SCHEMA_ARG_NAME = "Schema"
-
-# Match a STEP-encoded FILE_SCHEMA header: ``FILE_SCHEMA(('IFC4'));`` and the
-# IFC4X3_ADD2 / IFC2X3_TC1 variants. Captures the bare schema identifier.
-_IFC_FILE_SCHEMA_RE = re.compile(r"FILE_SCHEMA\s*\(\s*\(\s*'([^']+)'", re.IGNORECASE)
-
-
 class Patch(bonsai.core.tool.Patch):
     @classmethod
     def get_patch_props(cls) -> BIMPatchProperties:
@@ -69,63 +54,6 @@ class Patch(bonsai.core.tool.Patch):
             "SplitByBuildingStorey",
         )
 
-    @classmethod
-    def get_preset_subdir(cls) -> str:
-        """Resolve the preset subdirectory for the currently selected recipe.
-
-        Returns a stable string for the ``-`` placeholder so the menu and save
-        operator remain usable when no real recipe has been picked yet."""
-        recipe = cls.get_patch_props().ifc_patch_recipes or "-"
-        return f"bonsai/ifc_patch/{recipe}"
-
-    @classmethod
-    def migration_is_lossy_downgrade(cls) -> bool:
-        """``True`` when the currently configured patch is the ``Migrate``
-        recipe targeting an older schema than the input file. Used to gate
-        the destructive-migration confirmation dialog."""
-        props = cls.get_patch_props()
-        if props.ifc_patch_recipes != "Migrate":
-            return False
-        target_schema = next(
-            (arg.get_value() for arg in props.ifc_patch_args_attr if arg.name == _MIGRATE_SCHEMA_ARG_NAME),
-            None,
-        )
-        if not target_schema:
-            return False
-        source_schema = cls._patch_source_schema()
-        if not source_schema:
-            return False
-        return _SCHEMA_AGE.get(target_schema, -1) < _SCHEMA_AGE.get(source_schema, -1)
-
-    @classmethod
-    def _patch_source_schema(cls) -> str:
-        """Resolve the IFC schema of the configured input without parsing the
-        full file. For loaded-from-memory the schema is in the entity_instance
-        wrapper; for disk paths we read only the STEP file header (first ~2KB)
-        rather than ``ifcopenshell.open`` which parses the whole file."""
-        props = cls.get_patch_props()
-        if props.should_load_from_memory:
-            ifc_file = bonsai.tool.Ifc.get()
-            return ifc_file.schema if ifc_file else ""
-        if not props.ifc_patch_input:
-            return ""
-        try:
-            with open(props.ifc_patch_input, "rb") as f:
-                header = f.read(2048).decode("utf-8", errors="ignore")
-        except OSError:
-            return ""
-        match = _IFC_FILE_SCHEMA_RE.search(header)
-        if not match:
-            return ""
-        # Collapse IFC4X3_ADD2 / IFC2X3_TC1 / IFC4_ADD2 / IFC4X1 etc. to their
-        # base via the canonical normaliser — handles longest-prefix-first
-        # ordering correctly (IFC4X3 before IFC4) so we don't misclassify
-        # IFC4X3 files as IFC4.
-        try:
-            return ifcopenshell.util.schema.get_fallback_schema(match.group(1).upper())
-        except AssertionError:
-            return ""
-
     @classmethod
     def post_process_patch_arguments(cls, recipe: str, args: list[Any]) -> list[Any]:
         if recipe == "ExtractElements":

src/bonsai/bonsai/tool/project.py

@@ -32,7 +32,6 @@ from typing import (
     NotRequired,
     Optional,
     TypedDict,
-    Union,
 )
 
 import bpy
@@ -334,14 +333,6 @@ class Project(bonsai.core.tool.Project):
                 if reference[1]:
                     m = np.fromstring(reference[1], sep=",", dtype=np.float64).reshape(4, 4)
                     link.has_transformation = not np.allclose(m, np.eye(4))
-                # The selector query used at link time is persisted only in the
-                # sidecar cache JSON; restore it so Reload/Load replay the filter.
-                json_filepath = Path(tool.Ifc.resolve_uri(filepath)).with_suffix(".ifc.cache.json")
-                if json_filepath.exists():
-                    try:
-                        link.query = json.loads(json_filepath.read_text()).get("query", "")
-                    except (OSError, json.JSONDecodeError):
-                        pass
 
     @classmethod
     def get_project_library_elements(
@@ -385,31 +376,12 @@ class Project(bonsai.core.tool.Project):
             )
 
     @classmethod
-    def get_parent_library(
-        cls, project_library: ifcopenshell.entity_instance
-    ) -> Union[ifcopenshell.entity_instance, None]:
-        """Return the IfcContext that declares or nests ``project_library``.
-
-        Returns ``None`` when ``project_library`` is itself the root of a
-        library-only file (no IfcRelNests, no IfcRelDeclares).
-        """
+    def get_parent_library(cls, project_library: ifcopenshell.entity_instance) -> ifcopenshell.entity_instance:
         if nests := project_library.Nests:
+            # IfcProjectLibrary.
             return nests[0].RelatingObject
-        if has_context := project_library.HasContext:
-            return has_context[0].RelatingContext
-        return None
-
-    @classmethod
-    def get_root_context(cls, ifc_file: ifcopenshell.file) -> ifcopenshell.entity_instance:
-        """Return the file's root IfcContext.
-
-        Prefers IfcProject if present, otherwise falls back to IfcProjectLibrary —
-        library-only files are valid per IFC4+ and contain no IfcProject. Caller is
-        responsible for the IFC2X3 guard; IfcContext does not exist in that schema.
-        """
-        if projects := ifc_file.by_type("IfcProject"):
-            return projects[0]
-        return ifc_file.by_type("IfcProjectLibrary")[0]
+        # IfcProject.
+        return project_library.HasContext[0].RelatingContext
 
     @classmethod
     def get_project_hierarchy(cls, ifc_file: ifcopenshell.file) -> HiearchyDict:
@@ -429,8 +401,6 @@ class Project(bonsai.core.tool.Project):
             return hierarchy
         for project_library in ifc_file.by_type("IfcProjectLibrary"):
             parent_library = cls.get_parent_library(project_library)
-            if parent_library is None:
-                continue
             hierarchy[parent_library][project_library] = hierarchy[project_library]
         return hierarchy
 

src/bonsai/bonsai/tool/root.py

@@ -373,37 +373,35 @@ class Root(bonsai.core.tool.Root):
                 try:
                     new_aggregate = old_to_new[old_aggregate]
                 except:
-                    for new_entity in new:
-                        bonsai.core.aggregate.unassign_object(
-                            tool.Ifc,
-                            tool.Aggregate,
-                            tool.Collector,
-                            relating_obj=tool.Ifc.get_object(old_aggregate),
-                            related_obj=tool.Ifc.get_object(new_entity),
-                        )
-                    continue
-
-                for new_entity in new:
-                    bonsai.core.aggregate.assign_object(
+                    bonsai.core.aggregate.unassign_object(
                         tool.Ifc,
                         tool.Aggregate,
                         tool.Collector,
-                        relating_obj=tool.Ifc.get_object(new_aggregate[0]),
-                        related_obj=tool.Ifc.get_object(new_entity),
+                        relating_obj=tool.Ifc.get_object(old_aggregate),
+                        related_obj=tool.Ifc.get_object(new[0]),
                     )
+                    continue
 
-                    # Make sure that the array children also get reassigned to the correct aggregate
-                    pset = ifcopenshell.util.element.get_pset(new_entity, "BBIM_Array")
-                    if pset:
-                        array_children = tool.Array.get_all_children_objects(new_entity)
-                        for obj in array_children:
-                            bonsai.core.aggregate.assign_object(
-                                tool.Ifc,
-                                tool.Aggregate,
-                                tool.Collector,
-                                relating_obj=tool.Ifc.get_object(new_aggregate[0]),
-                                related_obj=tool.Ifc.get_object(tool.Ifc.get_entity(obj)),
-                            )
+                bonsai.core.aggregate.assign_object(
+                    tool.Ifc,
+                    tool.Aggregate,
+                    tool.Collector,
+                    relating_obj=tool.Ifc.get_object(new_aggregate[0]),
+                    related_obj=tool.Ifc.get_object(new[0]),
+                )
+
+                # Make sure that the array children also get reassigned to the correct aggregate
+                pset = ifcopenshell.util.element.get_pset(new[0], "BBIM_Array")
+                if pset:
+                    array_children = tool.Array.get_all_children_objects(new[0])
+                    for obj in array_children:
+                        bonsai.core.aggregate.assign_object(
+                            tool.Ifc,
+                            tool.Aggregate,
+                            tool.Collector,
+                            relating_obj=tool.Ifc.get_object(new_aggregate[0]),
+                            related_obj=tool.Ifc.get_object(tool.Ifc.get_entity(obj)),
+                        )
 
         if new_aggregate is None:
             return

src/bonsai/bonsai/tool/system.py

@@ -357,13 +357,6 @@ class System(bonsai.core.tool.System):
             if not cls.is_mep_element(element):
                 continue
 
-            # Array children inherit port topology from their parent's IFC
-            # entity, but their positions are derived — drawing ports on every
-            # copy of an arrayed segment doubles up markers and misleads the
-            # user into thinking each copy has its own port network.
-            if tool.Array.is_array_child(element):
-                continue
-
             selected_element = element in connected_elements
             verts_pos = []
 
@@ -495,69 +488,6 @@ class System(bonsai.core.tool.System):
     def is_mep_element(cls, element: ifcopenshell.entity_instance) -> bool:
         return element.is_a("IfcFlowSegment") or element.is_a("IfcFlowFitting")
 
-    @classmethod
-    def is_disconnectable_fitting(cls, element: ifcopenshell.entity_instance) -> bool:
-        """A fitting whose deletion is the supported teardown for one of
-        its port connections. ``OBSTRUCTION`` fittings are excluded — they
-        have a dedicated grow/shrink flow (``bim.mep_add_obstruction``
-        with ``mode=REMOVE``) that absorbs the freed segment length."""
-        if not element.is_a("IfcFlowFitting"):
-            return False
-        return getattr(element, "PredefinedType", None) != "OBSTRUCTION"
-
-    @classmethod
-    def neighbours_at_ports(cls, element: ifcopenshell.entity_instance) -> list[ifcopenshell.entity_instance]:
-        """Entities reachable from ``element``'s ports via a single
-        ``IfcRelConnectsPorts`` hop, deduped by IFC id."""
-        neighbours: list[ifcopenshell.entity_instance] = []
-        seen: set[int] = set()
-        for port in cls.get_ports(element):
-            connected_port = cls.get_connected_port(port)
-            if connected_port is None:
-                continue
-            neighbour = ifcopenshell.util.system.get_port_element(connected_port)
-            if neighbour is None or neighbour.id() in seen:
-                continue
-            seen.add(neighbour.id())
-            neighbours.append(neighbour)
-        return neighbours
-
-    @classmethod
-    def find_bridging_fitting(
-        cls,
-        elem_a: ifcopenshell.entity_instance,
-        elem_b: ifcopenshell.entity_instance,
-    ) -> Union[ifcopenshell.entity_instance, None]:
-        """Return the disconnectable ``IfcFlowFitting`` whose removal
-        disconnects ``elem_a`` from ``elem_b``, or ``None``.
-
-        Two topologies are handled. (1) Direct port-to-port between a
-        segment/fitting and a disconnectable fitting: the fitting endpoint
-        is returned. (2) Two segments joined by a single bridging
-        disconnectable fitting: the bridging fitting is returned.
-        ``OBSTRUCTION`` fittings short-circuit to ``None``."""
-        if not (cls.is_mep_element(elem_a) and cls.is_mep_element(elem_b)):
-            return None
-
-        a_neighbours = cls.neighbours_at_ports(elem_a)
-        b_neighbours = cls.neighbours_at_ports(elem_b)
-        elem_a_id = elem_a.id()
-        elem_b_id = elem_b.id()
-
-        if cls.is_disconnectable_fitting(elem_a) and any(n.id() == elem_b_id for n in a_neighbours):
-            return elem_a
-        if cls.is_disconnectable_fitting(elem_b) and any(n.id() == elem_a_id for n in b_neighbours):
-            return elem_b
-
-        a_fittings = [n for n in a_neighbours if cls.is_disconnectable_fitting(n)]
-        if not a_fittings:
-            return None
-        b_fitting_ids = {n.id() for n in b_neighbours if cls.is_disconnectable_fitting(n)}
-        for fitting in a_fittings:
-            if fitting.id() in b_fitting_ids:
-                return fitting
-        return None
-
     @classmethod
     def has_parametric_body(cls, element: ifcopenshell.entity_instance) -> bool:
         """True when the MEP element's body representation is a profile sweep

src/bonsai/bonsai/tool/type.py

@@ -24,7 +24,6 @@ import bpy
 import ifcopenshell
 import ifcopenshell.util.element
 import ifcopenshell.util.representation
-import ifcopenshell.util.type
 
 import bonsai.core.geometry
 import bonsai.core.tool
@@ -97,26 +96,6 @@ class Type(bonsai.core.tool.Type):
     def get_type_occurrences(cls, element_type: ifcopenshell.entity_instance) -> list[ifcopenshell.entity_instance]:
         return ifcopenshell.util.element.get_types(element_type)
 
-    @classmethod
-    def is_relating_type_compatible(
-        cls,
-        occurrence: ifcopenshell.entity_instance,
-        relating_type: ifcopenshell.entity_instance,
-    ) -> bool:
-        # IFC's EXPRESS schema has no WHERE rule pairing IfcRelDefinesByType's
-        # RelatingType / RelatedObjects classes; the one-to-one class pairing
-        # is a buildingSMART implementer agreement, not file-validation.
-        schema = occurrence.file.schema
-        if relating_type.is_a() in ifcopenshell.util.type.get_applicable_types(occurrence.is_a(), schema=schema):
-            return True
-        # The implementer agreement map has no entry for the abstract
-        # IfcTypeProduct, which Bonsai uses for annotation types. The schema
-        # defines IfcTypeProduct.ApplicableOccurrence for exactly this purpose,
-        # so honor it. occurrence.is_a() handles subtypes and unknown tokens.
-        if applicable_occurrence := getattr(relating_type, "ApplicableOccurrence", None):
-            return occurrence.is_a(applicable_occurrence.split("/", 1)[0])
-        return False
-
     @classmethod
     def has_material_usage(cls, element: ifcopenshell.entity_instance) -> bool:
         material = ifcopenshell.util.element.get_material(element)

src/bonsai/bonsai/tool/wall.py

@@ -242,75 +242,6 @@ class Wall(bonsai.core.tool.Wall):
         local_p2 = Vector((p2[0] * unit_scale, p2[1] * unit_scale, 0.0))
         return obj.matrix_world @ local_p1, obj.matrix_world @ local_p2
 
-    @classmethod
-    def iter_wall_slab_connections(cls, wall: ifcopenshell.entity_instance):
-        """Yield ``(slab, rel)`` tuples for every ``IfcRelConnectsElements(TOP)``
-        connecting a slab to this wall — the rel kind ``extend_walls_to_underside``
-        creates. Walks ``wall.ConnectedFrom`` because the slab is the relating
-        side of the TOP rel."""
-        for rel in getattr(wall, "ConnectedFrom", []) or ():
-            if not rel.is_a("IfcRelConnectsElements") or rel.Description != "TOP":
-                continue
-            slab = rel.RelatingElement
-            if slab is None:
-                continue
-            yield slab, rel
-
-    @classmethod
-    def iter_slab_wall_connections(cls, slab: ifcopenshell.entity_instance):
-        """Yield ``(wall, rel)`` tuples for every wall clipped to this slab's
-        underside. Mirror of ``iter_wall_slab_connections`` from the slab side
-        — walks ``slab.ConnectedTo``."""
-        for rel in getattr(slab, "ConnectedTo", []) or ():
-            if not rel.is_a("IfcRelConnectsElements") or rel.Description != "TOP":
-                continue
-            wall = rel.RelatedElement
-            if wall is None:
-                continue
-            yield wall, rel
-
-    @classmethod
-    def find_wall_slab_rel(
-        cls, wall: ifcopenshell.entity_instance, slab: ifcopenshell.entity_instance
-    ) -> ifcopenshell.entity_instance | None:
-        """Return the single ``IfcRelConnectsElements(TOP)`` between ``wall``
-        and ``slab``, or ``None`` if none exists. Used by the disconnect
-        operator to find the specific rel to remove."""
-        for s, rel in cls.iter_wall_slab_connections(wall):
-            if s == slab:
-                return rel
-        return None
-
-    WALL_SLAB_CONNECTION_Z_CLEARANCE = 0.5
-    """Lift above the wall top so the disconnect icon sits above the
-    extend-vertical / slope gizmo and reads as "the thing above the wall =
-    the slab connection"."""
-
-    @classmethod
-    def wall_slab_connection_location_world(
-        cls, wall_obj: bpy.types.Object, slab_obj: bpy.types.Object
-    ) -> Vector | None:
-        """World-space anchor for the wall-slab disconnect icon.
-
-        X / Y come from the wall axis midpoint (so the icon sits in the
-        middle of the wall horizontally); Z is the wall's top in world space
-        plus ``WALL_SLAB_CONNECTION_Z_CLEARANCE`` so the icon perches above
-        the slope gizmo. The slab-side gizmo calls this with the same
-        arguments so both sides of the same connection render a single
-        visual marker. ``slab_obj`` is kept on the signature for the
-        symmetric call shape; the helper's body no longer reads from it.
-        Returns ``None`` when the wall has no reference line."""
-        ref = cls.get_world_reference_line(wall_obj)
-        if ref is None:
-            return None
-        axis_mid_world = (ref[0] + ref[1]) * 0.5
-        if wall_obj.bound_box:
-            wall_top_local_z = max(c[2] for c in wall_obj.bound_box)
-            wall_top_world_z = (wall_obj.matrix_world @ Vector((0.0, 0.0, wall_top_local_z))).z
-        else:
-            wall_top_world_z = axis_mid_world.z
-        return Vector((axis_mid_world.x, axis_mid_world.y, wall_top_world_z + cls.WALL_SLAB_CONNECTION_Z_CLEARANCE))
-
     @classmethod
     def walk_connected_walls(
         cls,

src/bonsai/docs/_templates/sidebar/brand.html

@@ -38,8 +38,8 @@ Hope your day's going well. :)
 <script>
   // Define the mapping of versions to URLs
   const versionURLs = {
-    stable: 'https://docs.bonsaibim.org/',
-    unstable: 'https://docs-unstable.bonsaibim.org/',
+    stable: 'http://docs.bonsaibim.org/',
+    unstable: 'http://docs-unstable.bonsaibim.org/',
     // Add more versions here as needed
   };