express: include referencing SELECT types in typeof() (#3187)

Per ISO 10303-11 12.4.3, TYPEOF() must return every type a value conforms
to, including any SELECT data type that references it (transitively) as a
member. The previous implementation only walked entity supertypes and
defined-type chains, so it never reported SELECT types. This silently
broke every WHERE rule that tests SELECT membership through typeof: for
example IfcFillAreaStyle.MaxOneColour and ConsistentHatchStyleDef test
`'ifc4.ifccolour' in typeof(style)`, so an IfcFillAreaStyle with two
IfcColourRgb entries was never rejected.

typeof() now builds a per-schema (cached) reverse map from a type name to
the SELECT types that reference it as a direct member, then closes the
base type set over that map so selects-of-selects are also included. The
canonical implementation lives in the rule_compiler.py preamble and is
copied verbatim into every generated rules/*.py, so the source of truth
and the generated files are updated in lockstep.

Verified: typeof(IfcColourRgb) now yields ifccolour, ifccolourorfactor,
and ifcfillstyleselect; an IfcFillAreaStyle with two colours now fails
MaxOneColour. All 138 express rule fixtures still pass (75 pass-cases at 0
errors, 63 fail-cases still flagged), no regressions.

Generated with the assistance of an AI coding tool.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

.github/workflows/ci-ifcwrap-standalone.yml

@@ -0,0 +1,155 @@
+# This file was generated with the assistance of an AI coding tool.
+name: ci-ifcwrap-standalone
+
+on:
+  workflow_dispatch:
+  pull_request:
+    paths:
+      - ".github/workflows/ci-ifcwrap-standalone.yml"
+      - "cmake/**"
+      - "src/ifcwrap/**"
+      - "src/ifcparse/**"
+      - "src/ifcgeom/**"
+      - "src/serializers/**"
+      - "src/ifcconvert/**"
+      - "src/ifcopenshell-python/**"
+      - "src/svgfill/**"
+  push:
+    paths:
+      - ".github/workflows/ci-ifcwrap-standalone.yml"
+      - "cmake/**"
+      - "src/ifcwrap/**"
+      - "src/ifcparse/**"
+      - "src/ifcgeom/**"
+      - "src/serializers/**"
+      - "src/ifcconvert/**"
+      - "src/ifcopenshell-python/**"
+      - "src/svgfill/**"
+
+env:
+  IFCOPENSHELL_PREFIX: ${{ github.workspace }}/ifcopenshell-install
+
+jobs:
+  build-ifcopenshell:
+    runs-on: ubuntu-22.04
+
+    steps:
+      - uses: actions/checkout@v6
+        with:
+          submodules: recursive
+
+      - name: Install C++ dependencies
+        run: |
+          sudo apt update
+          sudo apt-get install --no-install-recommends -y \
+            cmake \
+            gcc \
+            g++ \
+            libboost-date-time-dev \
+            libboost-filesystem-dev \
+            libboost-iostreams-dev \
+            libboost-program-options-dev \
+            libboost-regex-dev \
+            libboost-system-dev \
+            libboost-thread-dev \
+            libeigen3-dev \
+            libocct-data-exchange-dev \
+            libocct-draw-dev \
+            libocct-foundation-dev \
+            libocct-modeling-algorithms-dev \
+            libocct-modeling-data-dev \
+            libocct-ocaf-dev \
+            libocct-visualization-dev \
+            libpcre3-dev \
+            libtbb-dev \
+            libxml2-dev \
+            libxi-dev \
+            occt-misc \
+            tcl-dev \
+            tk-dev \
+            swig
+
+      - name: Configure minimal IfcOpenShell
+        run: |
+          cmake -S cmake -B build-ifcopenshell \
+            -DCMAKE_BUILD_TYPE=Release \
+            -DCMAKE_INSTALL_PREFIX="${IFCOPENSHELL_PREFIX}" \
+            -DCMAKE_PREFIX_PATH=/usr \
+            -DCMAKE_SYSTEM_PREFIX_PATH=/usr \
+            -DMINIMAL_BUILD=ON \
+            -DBUILD_IFCPYTHON=OFF \
+            "-DSCHEMA_VERSIONS=4x3_add2"
+
+      - name: Build and install minimal IfcOpenShell
+        run: |
+          cmake --build build-ifcopenshell --target install -j "$(nproc)"
+
+      - name: Set up Python 3.11
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.11
+
+      - name: Install Python import dependencies
+        run: |
+          python -m pip install --upgrade pip
+          python -m pip install numpy typing_extensions
+
+      - name: Configure standalone IfcPython
+        run: |
+          PYTHON_EXECUTABLE="$(python -c 'import sys; print(sys.executable)')"
+          PYTHON_INCLUDE_DIR="$(python -c 'import sysconfig; print(sysconfig.get_path("include"))')"
+
+          cmake -S src/ifcwrap -B "build-ifcwrap-311" \
+            -DCMAKE_BUILD_TYPE=Release \
+            -DCMAKE_PREFIX_PATH="${IFCOPENSHELL_PREFIX};/usr" \
+            -DPython_EXECUTABLE:FILEPATH="${PYTHON_EXECUTABLE}" \
+            -DPython_INCLUDE_DIR:PATH="${PYTHON_INCLUDE_DIR}" \
+            -DPYTHON_EXECUTABLE:FILEPATH="${PYTHON_EXECUTABLE}" \
+            -DPYTHON_INCLUDE_DIR:PATH="${PYTHON_INCLUDE_DIR}"
+
+      - name: Build and install standalone IfcPython
+        run: |
+          cmake --build "build-ifcwrap-311" --target install -j "$(nproc)"
+
+      - name: Import installed IfcPython
+        run: |
+          PYTHONPATH="${RUNNER_TEMP}/ifcopenshell-python" python - <<'PY'
+          import ifcopenshell
+
+          print("IfcOpenShell import ok:", ifcopenshell.version)
+          PY
+
+      - name: Set up Python 3.12
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.12
+
+      - name: Install Python import dependencies
+        run: |
+          python -m pip install --upgrade pip
+          python -m pip install numpy typing_extensions
+
+      - name: Configure standalone IfcPython
+        run: |
+          PYTHON_EXECUTABLE="$(python -c 'import sys; print(sys.executable)')"
+          PYTHON_INCLUDE_DIR="$(python -c 'import sysconfig; print(sysconfig.get_path("include"))')"
+
+          cmake -S src/ifcwrap -B "build-ifcwrap-312" \
+            -DCMAKE_BUILD_TYPE=Release \
+            -DCMAKE_PREFIX_PATH="${IFCOPENSHELL_PREFIX};/usr" \
+            -DPython_EXECUTABLE:FILEPATH="${PYTHON_EXECUTABLE}" \
+            -DPython_INCLUDE_DIR:PATH="${PYTHON_INCLUDE_DIR}" \
+            -DPYTHON_EXECUTABLE:FILEPATH="${PYTHON_EXECUTABLE}" \
+            -DPYTHON_INCLUDE_DIR:PATH="${PYTHON_INCLUDE_DIR}"
+
+      - name: Build and install standalone IfcPython
+        run: |
+          cmake --build "build-ifcwrap-312" --target install -j "$(nproc)"
+
+      - name: Import installed IfcPython
+        run: |
+          PYTHONPATH="${RUNNER_TEMP}/ifcopenshell-python" python - <<'PY'
+          import ifcopenshell
+
+          print("IfcOpenShell import ok:", ifcopenshell.version)
+          PY

.github/workflows/ci.yml

@@ -10,9 +10,13 @@ on:
       - 'src/ifcgeomserver/**'
       - 'src/ifcjni/**'
       - 'src/ifcmax/**'
+      - 'src/ifc5d/**'
+      - 'src/ifcedit/**'
+      - 'src/ifcmcp/**'
       - 'src/ifcopenshell-python/**'
       - '!src/ifcopenshell-python/docs/**'
       - 'src/ifcparse/**'
+      - 'src/ifcquery/**'
       - 'src/ifcwrap/**'
       - 'src/qtviewer/**'
       - 'src/svgfill/**'
@@ -51,7 +55,7 @@ jobs:
       - name: Install dependencies
         run: |
           python -m pip install --upgrade pip
-          pip install xmlschema xsdata numpy lxml pytest isodate lark networkx tabulate python-dateutil shapely pyparsing
+          pip install xmlschema xsdata numpy lxml pytest isodate lark networkx tabulate python-dateutil shapely pyparsing psutil
           pip install src/bcf --no-deps
           pip install pytest-xdist==3.8.0
 
@@ -252,13 +256,26 @@ jobs:
           pip install deepdiff
           cd ../ifcdiff && make test || ERROR=1
           cd ../ifcpatch && make test || ERROR=1
+          pip install -e ../ifc5d --no-deps
+          pip install odfpy xlsxwriter
+          cd ../ifc5d && make test || ERROR=1
+          pip install -e ../ifcquery --no-deps
+          cd ../ifcquery && make test || ERROR=1
+          pip install -e ../ifcedit --no-deps
+          cd ../ifcedit && make test || ERROR=1
+          pip install mcp
+          pip install -e ../ifcmcp --no-deps
+          cd ../ifcmcp && make test || ERROR=1
           pip install -e ../ifctester --no-deps
           cd ../ifctester && make test || ERROR=1
           make build-ids-docs || ERROR=1
           # Run mathutils related tests at the end to ensure no other code is relying on mathutils.
+          # mathutils only has pre-built wheels for Python 3.13+; skip on older versions.
           cd ../ifcopenshell-python
-          pip install mathutils
-          make test-mathutils || ERROR=1
+          if python -c "import sys; sys.exit(0 if sys.version_info >= (3, 13) else 1)"; then
+            pip install mathutils
+            make test-mathutils || ERROR=1
+          fi
           if [ $ERROR -ne 0 ]; then
             echo "One or more tests failed";
             exit 1;

.gitignore

@@ -28,6 +28,7 @@ venv
 !.vscode/launch.json
 !.vscode/tasks.json
 .vs
+/*.code-workspace
 
 # PyCharm files
 .idea
@@ -126,5 +127,7 @@ src/ifcopenshell-python/ifcopenshell/express/*.exp.cache.dat
 
 # temp files from AI coding tools
 *.claude
+CLAUDE.local.md
 *.py.tmp*
 *.json.tmp*
+

cmake/CMakeLists.txt

@@ -27,13 +27,14 @@ endif()
 set(CMAKE_CXX_STANDARD_REQUIRED ON) # not necessary, but encouraged
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
 
-if(VERSION_OVERRIDE)
-    file(READ "../VERSION" "RELEASE_VERSION_")
-    string(STRIP "${RELEASE_VERSION_}" RELEASE_VERSION)
-    message(STATUS "Detected version '${RELEASE_VERSION}'")
-else()
-    set(RELEASE_VERSION "0.8.0")
-endif()
+# The VERSION file in the repository root is the single source of truth for the
+# release version. Read it unconditionally so a plain source build reports the
+# real version through buildinfo.cpp instead of the stale hardcoded 0.8.0
+# fallback (see #8164). VERSION_OVERRIDE still controls the branch name used
+# when ADD_COMMIT_SHA embeds a commit sha.
+file(READ "../VERSION" "RELEASE_VERSION_")
+string(STRIP "${RELEASE_VERSION_}" RELEASE_VERSION)
+message(STATUS "Detected version '${RELEASE_VERSION}'")
 
 add_definitions(-D_DISABLE_CONSTEXPR_MUTEX_CONSTRUCTOR)
 
@@ -258,10 +259,14 @@ if(WITH_ROCKSDB)
     set(ROCKSDB_LIBRARIES "IFCOPENSHELL_RocksDB")
     target_compile_definitions(IFCOPENSHELL_RocksDB INTERFACE IFOPSH_WITH_ROCKSDB)
     set(SWIG_DEFINES ${SWIG_DEFINES} -DIFOPSH_WITH_ROCKSDB)
-    # Shared binaries for `rocksdb` only support limited API (only `c.h`), but we use `db.h` API.
-    # So rocksdb supported only as a static library.
     # See https://github.com/facebook/rocksdb/issues/981.
-    target_link_libraries(IFCOPENSHELL_RocksDB INTERFACE RocksDB::rocksdb)
+    if(TARGET RocksDB::rocksdb)
+        target_link_libraries(IFCOPENSHELL_RocksDB INTERFACE RocksDB::rocksdb)
+    elseif(TARGET RocksDB::rocksdb-shared)
+        target_link_libraries(IFCOPENSHELL_RocksDB INTERFACE RocksDB::rocksdb-shared)
+    else()
+        message(FATAL_ERROR "RocksDB found but neither RocksDB::rocksdb nor RocksDB::rocksdb-shared target exists")
+    endif()
 
     if(WITH_ZSTD)
         # @todo do we actually need the zstd include dir or rather just pass
@@ -309,8 +314,12 @@ if(WASM_BUILD)
 else()
     # @todo review this, shouldn't this be all possible header-only now?
     # ... or rewritten using C++17 features?
+    # Boost.System has been header-only since 1.69 and its compiled stub library
+    # was dropped in newer Boost, so requesting it as a component makes
+    # find_package fail on Boost 1.70 and up (for example Boost 1.90). It is
+    # still pulled in transitively by thread / iostreams where needed, so do not
+    # request it explicitly.
     set(BOOST_COMPONENTS
-        system
         program_options
         regex
         thread
@@ -656,6 +665,11 @@ if(ADD_COMMIT_SHA)
     endif()
 endif(ADD_COMMIT_SHA)
 
+# Always expose the release version (from the VERSION file) to buildinfo.cpp so
+# that a build without commit-sha info reports the correct version instead of a
+# stale hardcoded fallback. See #8164.
+target_compile_definitions(IfcParse PRIVATE IFCOPENSHELL_VERSION_STRING=${RELEASE_VERSION})
+
 if(MSVC)
     # @todo still needs to be understood better, but the cgal and cgal-simple kernel cause multiply defined boost lambda placeholders _1 ... _3
     set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /FORCE:MULTIPLE")

cmake/FindHDF5.cmake

@@ -88,7 +88,15 @@ if(NOT HDF5_INCLUDE_DIR OR NOT HDF5_LIBRARY_DIR)
     mark_as_advanced(HDF5_DIR)
     if(HDF5_DIR)
         message(STATUS "HDF5: found config at '${HDF5_DIR}'.")
-        set(HDF5_LIBRARIES hdf5_cpp-static)
+        if(TARGET hdf5_cpp-static)
+            set(HDF5_LIBRARIES hdf5_cpp-static)
+        elseif(TARGET hdf5_cpp-shared)
+            set(HDF5_LIBRARIES hdf5_cpp-shared)
+        elseif(TARGET hdf5::hdf5_cpp-shared)
+            set(HDF5_LIBRARIES hdf5::hdf5_cpp-shared)
+        else()
+            find_package(HDF5 REQUIRED COMPONENTS CXX)
+        endif()
     else()
         # If it failed, still try to find as a module.
         # E.g. on Ubuntu `libhdf5-dev` doesn't provie hdf5-config.cmake.

cmake/FindIfcOpenShell.cmake

@@ -0,0 +1,131 @@
+# This file was generated with the assistance of an AI coding tool.
+################################################################################
+#                                                                              #
+# This file is part of IfcOpenShell.                                           #
+#                                                                              #
+# IfcOpenShell is free software: you can redistribute it and/or modify         #
+# it under the terms of the Lesser GNU General Public License as published by  #
+# the Free Software Foundation, either version 3.0 of the License, or          #
+# (at your option) any later version.                                          #
+#                                                                              #
+# IfcOpenShell is distributed in the hope that it will be useful,              #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of               #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the                 #
+# Lesser GNU General Public License for more details.                          #
+#                                                                              #
+# You should have received a copy of the Lesser GNU General Public License     #
+# along with this program. If not, see <http://www.gnu.org/licenses/>.         #
+#                                                                              #
+################################################################################
+
+include("${CMAKE_CURRENT_LIST_DIR}/utilities.cmake" OPTIONAL)
+
+set(_IfcOpenShell_find_args)
+if(IfcOpenShell_FIND_VERSION)
+    list(APPEND _IfcOpenShell_find_args "${IfcOpenShell_FIND_VERSION}")
+    if(IfcOpenShell_FIND_VERSION_EXACT)
+        list(APPEND _IfcOpenShell_find_args EXACT)
+    endif()
+endif()
+list(APPEND _IfcOpenShell_find_args CONFIG QUIET)
+if(IfcOpenShell_FIND_COMPONENTS)
+    list(APPEND _IfcOpenShell_find_args COMPONENTS ${IfcOpenShell_FIND_COMPONENTS})
+endif()
+
+set(_IfcOpenShell_saved_module_path "${CMAKE_MODULE_PATH}")
+list(REMOVE_ITEM CMAKE_MODULE_PATH "${CMAKE_CURRENT_LIST_DIR}")
+find_package(IfcOpenShell ${_IfcOpenShell_find_args})
+set(CMAKE_MODULE_PATH "${_IfcOpenShell_saved_module_path}")
+
+if(NOT IfcOpenShell_FOUND)
+    set(_IfcOpenShell_error "Could not find an IfcOpenShell CMake config package. Set IfcOpenShell_DIR or CMAKE_PREFIX_PATH.")
+    if(IfcOpenShell_FIND_REQUIRED)
+        message(FATAL_ERROR "${_IfcOpenShell_error}")
+    elseif(NOT IfcOpenShell_FIND_QUIETLY)
+        message(STATUS "${_IfcOpenShell_error}")
+    endif()
+    return()
+endif()
+
+set(_IfcOpenShell_required_targets IfcOpenShell::IfcParse IfcOpenShell::IfcGeom)
+set(_IfcOpenShell_missing_targets "")
+foreach(_IfcOpenShell_target IN LISTS _IfcOpenShell_required_targets)
+    if(NOT TARGET ${_IfcOpenShell_target})
+        list(APPEND _IfcOpenShell_missing_targets ${_IfcOpenShell_target})
+    endif()
+endforeach()
+
+if(_IfcOpenShell_missing_targets)
+    set(IfcOpenShell_FOUND FALSE)
+    string(REPLACE ";" ", " _IfcOpenShell_missing_targets_text "${_IfcOpenShell_missing_targets}")
+    set(_IfcOpenShell_error "IfcOpenShell config was found, but required targets are missing: ${_IfcOpenShell_missing_targets_text}.")
+    if(IfcOpenShell_FIND_REQUIRED)
+        message(FATAL_ERROR "${_IfcOpenShell_error}")
+    elseif(NOT IfcOpenShell_FIND_QUIETLY)
+        message(STATUS "${_IfcOpenShell_error}")
+    endif()
+    return()
+endif()
+
+if(NOT DEFINED IFCOPENSHELL_WITH_OPENCASCADE)
+    set(IFCOPENSHELL_WITH_OPENCASCADE OFF)
+    if(TARGET IfcOpenShell::geometry_kernel_opencascade)
+        set(IFCOPENSHELL_WITH_OPENCASCADE ON)
+    endif()
+endif()
+
+if(NOT DEFINED IFCOPENSHELL_WITH_CGAL)
+    set(IFCOPENSHELL_WITH_CGAL OFF)
+    if(TARGET IfcOpenShell::IFCOPENSHELL_CGAL)
+        set(IFCOPENSHELL_WITH_CGAL ON)
+    endif()
+endif()
+
+if(NOT DEFINED IFCOPENSHELL_IFCXML)
+    set(IFCOPENSHELL_IFCXML OFF)
+endif()
+
+if(NOT DEFINED IFCOPENSHELL_WITH_ROCKSDB)
+    set(IFCOPENSHELL_WITH_ROCKSDB OFF)
+endif()
+
+set(IFCOPENSHELL_LIBRARIES IfcOpenShell::IfcParse)
+foreach(_IfcOpenShell_target IN ITEMS IfcOpenShell::geometry_serializer IfcOpenShell::Serializers)
+    if(TARGET ${_IfcOpenShell_target})
+        list(APPEND IFCOPENSHELL_LIBRARIES ${_IfcOpenShell_target})
+    endif()
+endforeach()
+
+set(IFCOPENSHELL_KERNEL_LIBRARIES "")
+foreach(_IfcOpenShell_target IN ITEMS
+    IfcOpenShell::geometry_kernel_opencascade
+    IfcOpenShell::geometry_kernel_cgal
+    IfcOpenShell::geometry_kernel_cgal_simple
+)
+    if(TARGET ${_IfcOpenShell_target})
+        list(APPEND IFCOPENSHELL_KERNEL_LIBRARIES ${_IfcOpenShell_target})
+    endif()
+endforeach()
+
+set(IFCOPENSHELL_GEOMETRY_LIBRARIES IfcOpenShell::IfcGeom ${IFCOPENSHELL_KERNEL_LIBRARIES})
+
+if(TARGET IfcOpenShell::OpenCASCADE_INTERFACE)
+    set(OpenCASCADE_LIBRARIES IfcOpenShell::OpenCASCADE_INTERFACE)
+endif()
+
+if(TARGET IfcOpenShell::IFCOPENSHELL_CGAL)
+    set(CGAL_LIBRARIES IfcOpenShell::IFCOPENSHELL_CGAL)
+endif()
+
+if(TARGET IfcOpenShell::svgfill)
+    set(IFCOPENSHELL_SVGFILL_LIBRARY IfcOpenShell::svgfill)
+endif()
+
+mark_as_advanced(IfcOpenShell_DIR)
+
+unset(_IfcOpenShell_error)
+unset(_IfcOpenShell_find_args)
+unset(_IfcOpenShell_missing_targets)
+unset(_IfcOpenShell_missing_targets_text)
+unset(_IfcOpenShell_required_targets)
+unset(_IfcOpenShell_target)

cmake/IfcOpenShellConfig.cmake.in

@@ -7,12 +7,26 @@ set(IFCOPENSHELL_WITH_OPENCASCADE @WITH_OPENCASCADE@)
 set(IFCOPENSHELL_WITH_CGAL @WITH_CGAL@)
 set(IFCOPENSHELL_IFCXML @IFCXML_SUPPORT@)
 set(IFCOPENSHELL_WITH_ROCKSDB @WITH_ROCKSDB@)
+set(IFCOPENSHELL_COLLADA_SUPPORT @COLLADA_SUPPORT@)
+set(IFCOPENSHELL_GLTF_SUPPORT @GLTF_SUPPORT@)
+set(IFCOPENSHELL_HDF5_SUPPORT @HDF5_SUPPORT@)
+set(IFCOPENSHELL_WITH_PROJ @WITH_PROJ@)
+set(IFCOPENSHELL_USD_SUPPORT @USD_SUPPORT@)
 
 include(CMakeFindDependencyMacro)
 
-set(Boost_USE_STATIC_LIBS ON)
-set(Boost_USE_STATIC_RUNTIME OFF)
-set(Boost_USE_MULTITHREADED ON)
+set(IFCOPENSHELL_BOOST_USE_STATIC_LIBS "@Boost_USE_STATIC_LIBS@")
+set(IFCOPENSHELL_BOOST_USE_STATIC_RUNTIME "@Boost_USE_STATIC_RUNTIME@")
+set(IFCOPENSHELL_BOOST_USE_MULTITHREADED "@Boost_USE_MULTITHREADED@")
+if(NOT "${IFCOPENSHELL_BOOST_USE_STATIC_LIBS}" STREQUAL "")
+    set(Boost_USE_STATIC_LIBS ${IFCOPENSHELL_BOOST_USE_STATIC_LIBS})
+endif()
+if(NOT "${IFCOPENSHELL_BOOST_USE_STATIC_RUNTIME}" STREQUAL "")
+    set(Boost_USE_STATIC_RUNTIME ${IFCOPENSHELL_BOOST_USE_STATIC_RUNTIME})
+endif()
+if(NOT "${IFCOPENSHELL_BOOST_USE_MULTITHREADED}" STREQUAL "")
+    set(Boost_USE_MULTITHREADED ${IFCOPENSHELL_BOOST_USE_MULTITHREADED})
+endif()
 set(Boost_COMPONENTS
     system
     program_options
@@ -43,13 +57,33 @@ if(IFCOPENSHELL_WITH_ROCKSDB)
 endif()
 
 if(IFCOPENSHELL_IFCXML)
-    find_dependency(LibXml2 CONFIG)
+    find_dependency(LibXml2)
 endif()
 
 if(IFCOPENSHELL_WITH_CGAL)
     find_dependency(CGAL CONFIG)
 endif()
 
+if(IFCOPENSHELL_COLLADA_SUPPORT)
+    find_dependency(OpenCOLLADA)
+endif()
+
+if(IFCOPENSHELL_GLTF_SUPPORT)
+    find_dependency(nlohmann_json CONFIG)
+endif()
+
+if(IFCOPENSHELL_HDF5_SUPPORT)
+    find_dependency(HDF5 COMPONENTS C CXX)
+endif()
+
+if(IFCOPENSHELL_WITH_PROJ)
+    find_dependency(PROJ)
+endif()
+
+if(IFCOPENSHELL_USD_SUPPORT)
+    find_dependency(USD)
+endif()
+
 if(IFCOPENSHELL_WITH_OPENCASCADE)
     find_dependency(OpenCASCADE CONFIG)
     if(OpenCASCADE_VERSION VERSION_LESS "7.7.0")

src/bonsai/Makefile

@@ -106,7 +106,7 @@ endif
 endif # def PLATFORM
 
 # Current build commit hash.
-OLD:=1c5b825
+OLD:=3e7b739
 .PHONY: bump
 bump:
 ifndef NEW

src/bonsai/bonsai/bim/__init__.py

@@ -29,18 +29,6 @@ from bpy_extras.io_utils import ExportHelper, ImportHelper
 
 from . import handler, operator, parametric_lifecycle, prop, ui
 
-
-def _parametric_gizmo_preference_classes() -> list[type]:
-    """Resolves the registry-driven ``GizmoPreferences<X>`` classes for the
-    ``classes`` list below. ``import bonsai.tool`` is kept local to surface
-    the load-order constraint: it relies on ``from . import handler, …``
-    above having primed the
-    ``tool/ifc.py → bim/ifc.py → bim/handler.py → bonsai.tool`` cycle."""
-    import bonsai.tool as tool
-
-    return tool.Parametric.iter_gizmo_preference_classes(ui)
-
-
 try:
     from bonsai.translations import translations_dict
 except ImportError:
@@ -102,6 +90,7 @@ modules = {
     "web": None,
     "light": None,
     "alignment": None,
+    "clip_box": None,
     # Uncomment this line to enable loading of the demo module. Happy hacking!
     # The name "demo" must correlate to a folder name in `bim/module/`.
     # "demo": None,
@@ -171,10 +160,6 @@ classes = [
     ui.BIM_UL_tab_visibilities,
     ui.BIM_UL_panel_visibilities,
     ui.DocPreferences,
-    # Per-parametric-type ``GizmoPreferences<Name>`` classes — must register
-    # before ``ui.GizmoPreferences`` which holds the matching PointerProperty
-    # fields. Driven by ``tool.Parametric.EDIT_TYPES``.
-    *_parametric_gizmo_preference_classes(),
     ui.GizmoPreferences,
     # ui.DefaultParameters and ui.BIM_ADDON_preferences are registered separately after modules (see late_classes below)
     # Tabs panel

src/bonsai/bonsai/bim/data/pset/EPset_Drawing.ifc

@@ -5,7 +5,7 @@ FILE_NAME('EPset_Drawing.ifc','2020-01-01T00:00:00',$,$,'EPset_Drawing','EPset_D
 FILE_SCHEMA(('IFC4'));
 ENDSEC;
 DATA;
-#1=IFCPROPERTYSETTEMPLATE('2JhNIvqZrFnAgxfhK0XVQX',$,'EPset_Drawing','',.PSET_OCCURRENCEDRIVEN.,'IfcAnnotation/DRAWING',(#23,#22,#27,#24,#19,#12,#26,#9,#8,#7,#6,#4,#18,#11,#5,#20,#25,#14,#10,#17,#28,#16,#3,#21,#13,#15,#2));
+#1=IFCPROPERTYSETTEMPLATE('2JhNIvqZrFnAgxfhK0XVQX',$,'EPset_Drawing','',.PSET_OCCURRENCEDRIVEN.,'IfcAnnotation/DRAWING',(#23,#22,#27,#24,#29,#30,#19,#12,#26,#9,#8,#7,#6,#4,#18,#11,#5,#20,#25,#14,#10,#17,#28,#16,#3,#21,#13,#15,#2));
 #2=IFCSIMPLEPROPERTYTEMPLATE('23JavTMk98ZxXhrUEnjAcf',$,'TargetView','',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
 #3=IFCSIMPLEPROPERTYTEMPLATE('1yVWUt5H9DAOuu0OaMMLpe',$,'Scale','The scale of this drawing represented as a numerator and denominator, such as 1/100',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
 #4=IFCSIMPLEPROPERTYTEMPLATE('3gsuPBtU93b8f0gg1pjkq6',$,'HumanScale','The scale of this drawing in human readable format, such as 1:100',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
@@ -33,5 +33,7 @@ DATA;
 #26=IFCSIMPLEPROPERTYTEMPLATE('2iwERDOW55Pf4hCbuFRe1Q',$,'FillMode','Method to fill areas seen in projection',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
 #27=IFCSIMPLEPROPERTYTEMPLATE('1YF$qLzBzF19Io8aB2N8cE',$,'CutMode','Method for cutting geometry',.P_SINGLEVALUE.,'IfcLabel',$,$,$,$,$,.READWRITE.);
 #28=IFCSIMPLEPROPERTYTEMPLATE('1YSnFzurrEyRNtoLdmmddP',$,'BringToFront','The objects with these SVG classes will render in front of all other objects.Ex: IfcBeam, IfcColumn',.P_SINGLEVALUE.,'IfcText',$,$,$,$,$,.READWRITE.);
+#29=IFCSIMPLEPROPERTYTEMPLATE('0lP6Y8q9v2QhDnR4sT7uVx',$,'PerspectiveShiftX','Horizontal perspective camera shift stored as drawing metadata using Blender camera shift units.',.P_SINGLEVALUE.,'IfcReal',$,$,$,$,$,.READWRITE.);
+#30=IFCSIMPLEPROPERTYTEMPLATE('2mR8b1NcW5EoFyG7hJ9kLp',$,'PerspectiveShiftY','Vertical perspective camera shift stored as drawing metadata using Blender camera shift units.',.P_SINGLEVALUE.,'IfcReal',$,$,$,$,$,.READWRITE.);
 ENDSEC;
 END-ISO-10303-21;

src/bonsai/bonsai/bim/handler.py

@@ -41,14 +41,23 @@ from bonsai.bim.decorator_cache import (
 from bonsai.bim.ifc import IfcStore, get_cache_or_detect_lock
 from bonsai.bim.module.aggregate.decorator import AggregateDecorator
 from bonsai.bim.module.georeference.decorator import GeoreferenceDecorator
+from bonsai.bim.module.model.array import (
+    ArrayPreviewDecorator,
+    ArraySelectionHighlightDecorator,
+)
 from bonsai.bim.module.model.data import AuthoringData
 from bonsai.bim.module.model.decorator import (
+    BendPreviewDecorator,
     BoundingBoxDecorator,
+    DoorSwingReadonlyDecorator,
+    MEPSegmentExtendPreviewDecorator,
+    MEPSystemPathDecorator,
     SlabDirectionDecorator,
     WallAxisDecorator,
     WallFilletPreviewDecorator,
+    WallSystemPathDecorator,
 )
-from bonsai.bim.module.model.preview_base import discard_pending_previews
+from bonsai.bim.module.model.wall import WallGizmoPreviewDecorator
 from bonsai.bim.module.nest.decorator import NestDecorator
 
 cwd = os.path.dirname(os.path.realpath(__file__))
@@ -116,19 +125,13 @@ def active_object_callback():
 
 
 def update_bim_tool_props():
-    """update BIM Tools props (such as extrusion_depth, length and x_angle) when active object changes"""
-    obj = bpy.context.active_object
-
-    # bunch of checks to see if we're in a valid state
-    if not obj:
-        return
-    mode = bpy.context.mode
-    current_tool = bpy.context.workspace.tools.from_space_view3d_mode(mode)
-    if not current_tool or current_tool.idname not in tool.Blender.get_list_of_tools():
-        return
-    element = tool.Ifc.get_entity(obj)
-    if not element:
+    """Selection-driven BIM Tool sync: re-target user-intent enums
+    (ifc_class, relating_type_id) AND refresh header values
+    (extrusion_depth, length, x_angle) for the new active object."""
+    ctx = _resolve_bim_tool_context()
+    if ctx is None:
         return
+    obj, current_tool, element = ctx
 
     props = tool.Model.get_model_props()
     aprops = tool.Drawing.get_annotation_props()
@@ -178,6 +181,48 @@ def update_bim_tool_props():
     if is_annotation_tool:
         return
 
+    _read_headers_into_props(obj, element)
+
+
+def refresh_bim_tool_headers():
+    """Push the active IFC entity's current header float values
+    (extrusion_depth, length, x_angle) into ``BIMModelProperties``.
+    Enum-safe: never writes user-intent enum slots, which are owned by
+    the selection callback."""
+    ctx = _resolve_bim_tool_context()
+    if ctx is None:
+        return
+    obj, current_tool, element = ctx
+    if current_tool.idname not in tool.Blender.get_property_header_tools():
+        return
+    _read_headers_into_props(obj, element)
+
+
+def _resolve_bim_tool_context():
+    """Return ``(obj, current_tool, element)`` when an active BIM workspace
+    tool sees a resolvable IFC element; ``None`` otherwise. Defensive
+    against stripped operator contexts — a missing ``active_object`` /
+    ``mode`` / ``workspace`` short-circuits to ``None`` instead of raising."""
+    obj = tool.Blender.get_active_object()
+    if not obj:
+        return None
+    mode = getattr(bpy.context, "mode", None)
+    workspace = getattr(bpy.context, "workspace", None)
+    if mode is None or workspace is None:
+        return None
+    current_tool = workspace.tools.from_space_view3d_mode(mode)
+    if not current_tool or current_tool.idname not in tool.Blender.get_list_of_tools():
+        return None
+    element = tool.Ifc.get_entity(obj)
+    if not element:
+        return None
+    return obj, current_tool, element
+
+
+def _read_headers_into_props(obj, element):
+    """Populate ``BIMModelProperties`` header values from the active
+    object's IFC extrusion. Enum-safe: writes only header floats, never
+    user-intent enum slots, so it is safe to call on the post-commit hook."""
     representation = ifcopenshell.util.representation.get_representation(element, "Model", "Body", "MODEL_VIEW")
     if not representation:
         return
@@ -195,6 +240,7 @@ def update_bim_tool_props():
     if not AuthoringData.is_loaded:
         AuthoringData.load()
 
+    props = tool.Model.get_model_props()
     if AuthoringData.data["active_material_usage"] == "LAYER2":
         x_angle = get_x_angle(extrusion)
         axis = tool.Model.get_wall_axis(obj)["reference"]
@@ -274,9 +320,11 @@ def loadIfcStore(scene: bpy.types.Scene) -> None:
     IfcStore.purge()
     refresh_ui_data()
     if not tool.Ifc.get():
+        tool.Autosave.cancel_timer()
         return
     tool.Ifc.schema()
     IfcStore.relink_all_objects()
+    tool.Autosave.reset_timer()
 
 
 @persistent
@@ -393,8 +441,8 @@ def subscribe_to_viewport_shading_changes():
 
 def _apply_save_file_invariants(scene: bpy.types.Scene) -> None:
     """Invariants enforced on every load_post: msgbus subscription, IFC owner
-    settings, scene-bound caches, draft-flag healing, multi-instance lock probe,
-    and previews discarded so saved preview state never resurfaces on reopen."""
+    settings, scene-bound caches, load-transient parametric state, and the
+    multi-instance lock probe."""
     global global_subscription_owner
     active_object_key = bpy.types.LayerObjects, "active"
     bpy.msgbus.subscribe_rna(
@@ -405,8 +453,7 @@ def _apply_save_file_invariants(scene: bpy.types.Scene) -> None:
     ifcopenshell.api.owner.settings.get_application = get_application
     AuthoringData.type_thumbnails = {}
 
-    tool.Parametric.heal_stale_edit_flags()
-    discard_pending_previews(scene)
+    tool.Parametric.on_load_post(scene)
 
     if tool.Ifc.get() and bpy.data.is_saved:
         props = tool.Blender.get_bim_props()
@@ -470,7 +517,15 @@ def _install_viewport_overlays() -> None:
     NestDecorator.uninstall()
     WallAxisDecorator.uninstall()
     SlabDirectionDecorator.uninstall()
+    MEPSystemPathDecorator.uninstall()
+    WallSystemPathDecorator.uninstall()
     WallFilletPreviewDecorator.uninstall()
+    BendPreviewDecorator.uninstall()
+    MEPSegmentExtendPreviewDecorator.uninstall()
+    WallGizmoPreviewDecorator.uninstall()
+    DoorSwingReadonlyDecorator.uninstall()
+    ArrayPreviewDecorator.uninstall()
+    ArraySelectionHighlightDecorator.uninstall()
     uninstall_decorator_cache_handlers()
     try:
         if georeference_props.should_visualise:
@@ -483,12 +538,35 @@ def _install_viewport_overlays() -> None:
             WallAxisDecorator.install(bpy.context)
         if model_props.show_slab_direction:
             SlabDirectionDecorator.install(bpy.context)
+        if model_props.show_paths:
+            MEPSystemPathDecorator.install(bpy.context)
+            WallSystemPathDecorator.install(bpy.context)
         if model_props.show_bounding_box:
             BoundingBoxDecorator.install(bpy.context)
         # Always-installed: draw() self-polls on Scene.BIMPreviewProperties.
         # wall_fillet.is_active, so installation has no cost when no preview
         # is open. No corresponding addon-preference toggle.
         WallFilletPreviewDecorator.install(bpy.context)
+        # Always-installed siblings of WallFilletPreviewDecorator: each
+        # self-polls on its own scene.BIMPreviewProperties subgroup or on
+        # selection + hover gizmo state — zero cost when nothing is active.
+        BendPreviewDecorator.install(bpy.context)
+        MEPSegmentExtendPreviewDecorator.install(bpy.context)
+        # Always-installed: draw_lines() self-polls on selection + hover state
+        # for join / extend-to-wall / cursor-extend / cursor-split previews.
+        # Free when no preview-eligible state is active.
+        WallGizmoPreviewDecorator.install(bpy.context)
+        # Always-installed: draw() self-polls on active object + IfcDoor +
+        # parametric pset, so the cost is one bpy/IFC lookup per redraw when
+        # nothing eligible is selected.
+        DoorSwingReadonlyDecorator.install(bpy.context)
+        # Always-installed: draw() self-polls on the active object's array
+        # family membership, so installation has no cost when no array
+        # element is selected.
+        ArraySelectionHighlightDecorator.install(bpy.context)
+        # Always-installed: draw() self-polls on props.is_editing — only
+        # paints during an active array edit lifecycle.
+        ArrayPreviewDecorator.install(bpy.context)
     finally:
         install_decorator_cache_handlers()
 

src/bonsai/bonsai/bim/ifc.py

@@ -552,7 +552,7 @@ class IfcStore:
                     BrickStore.end_transaction()
                 IfcStore.end_transaction(operator)
                 bonsai.bim.handler.refresh_ui_data()
-                tool.Parametric.refresh_post_commit()
+                tool.Parametric.refresh_post_commit(operator)
 
                 if method == "MODAL":
                     cls.modal_in_progress = False
@@ -566,6 +566,19 @@ class IfcStore:
                 result = getattr(operator, "_modal")(context, event)
         except:
             bonsai.last_error = traceback.format_exc()
+            # An operator that mutated IFC then raised leaves the IFC graph captured
+            # by the transaction but the Blender side stale. Blender does not push an
+            # undo step for a raised operator (mirror of the CANCELLED-modal gap
+            # handled below), so we push one here so Ctrl+Z actually rewinds the
+            # partial mutation, then surface the recovery path to the user.
+            ifc_file = tool.Ifc.get()
+            if ifc_file and ifc_file.transaction and ifc_file.transaction.operations:
+                bpy.ops.ed.undo_push(message=f"Recover {operator.bl_idname}")
+                operator.report(
+                    {"WARNING"},
+                    "Operation partially completed (IFC changed, Blender state may be stale). "
+                    "Press Ctrl+Z to restore the previous state.",
+                )
             # Try to ensure undo will work since Blender undo does work in case of errors.
             # As error come unexpectedly, it's important that user might have a chance to save the file
             # before they got the error and not to lose the work they've done.

src/bonsai/bonsai/bim/import_ifc.py

@@ -223,6 +223,7 @@ class IfcImporter:
         self.elements: set[ifcopenshell.entity_instance] = set()
         self.annotations: set[ifcopenshell.entity_instance] = set()
         self.gross_elements: set[ifcopenshell.entity_instance] = set()
+        self.broken_arrays: set[ifcopenshell.entity_instance] = set()
         self.element_types: set[ifcopenshell.entity_instance] = set()
         self.spatial_elements: set[ifcopenshell.entity_instance] = set()
         self.meshes: dict[str, OBJECT_DATA_TYPE] = {}
@@ -1219,8 +1220,18 @@ class IfcImporter:
                         if element not in elements_to_import:
                             continue
                     for i in range(len(data)):
-                        tool.Blender.Modifier.Array.set_children_lock_state(element, i, True)
-                        tool.Blender.Modifier.Array.constrain_children_to_parent(element)
+                        tool.Array.set_children_lock_state(element, i, True)
+                    tool.Array.constrain_children_to_parent(element)
+                    for layer in data:
+                        for child_guid in layer.get("children", ()):
+                            try:
+                                self.file.by_guid(child_guid)
+                            except RuntimeError:
+                                print(
+                                    f"setup_arrays: array parent {element.GlobalId} references missing "
+                                    f"child GUID {child_guid!r}."
+                                )
+                                self.broken_arrays.add(element)
 
     def update_linked_aggregates(self):
         # TODO Remove this after a while. See commit 17d6b8a

src/bonsai/bonsai/bim/module/aggregate/decorator.py

@@ -20,7 +20,6 @@ import blf
 import bpy
 import gpu
 import ifcopenshell.util.element
-from bpy.types import SpaceView3D
 from bpy_extras import view3d_utils
 from gpu_extras.batch import batch_for_shader
 from mathutils import Vector
@@ -28,12 +27,6 @@ from mathutils import Vector
 import bonsai.tool as tool
 
 
-def transparent_color(color, alpha=0.1):
-    color = [i for i in color]
-    color[3] = alpha
-    return color
-
-
 def create_bounding_box(objs):
     # Initialize the bounding box coordinates
     min_x, min_y, min_z = float("inf"), float("inf"), float("inf")
@@ -79,26 +72,8 @@ def create_bounding_box(objs):
     return indices, edges
 
 
-class AggregateDecorator:
-    is_installed = False
-    handlers = []
-
-    @classmethod
-    def install(cls, context):
-        if cls.is_installed:
-            cls.uninstall()
-        handler = cls()
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_aggregate, (context,), "WINDOW", "POST_VIEW"))
-        cls.is_installed = True
-
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
+class AggregateDecorator(tool.Blender.ViewportDecorator):
+    draw_method = "draw_aggregate"
 
     def dotted_line_shader(self):
         vert_out = gpu.types.GPUStageInterfaceInfo("my_interface")
@@ -153,14 +128,6 @@ class AggregateDecorator:
         shader.uniform_float("u_Scale", 25)
         batch.draw(shader)
 
-    def draw_batch(self, shader_type, content_pos, color, indices=None):
-        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
-            return
-        shader = self.line_shader if shader_type == "LINES" else self.shader
-        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
-        shader.uniform_float("color", color)
-        batch.draw(shader)
-
     def draw_aggregate(self, context):
         props = tool.Aggregate.get_aggregate_props()
         self.addon_prefs = tool.Blender.get_addon_preferences()
@@ -191,12 +158,13 @@ class AggregateDecorator:
                 aggregates.append(obj)
                 continue
 
+            aggregate = None
             aggregates_list = tool.Aggregate.get_aggregates_recursively(element)
             if props.in_aggregate_mode and props.editing_aggregate:
                 index = aggregates_list.index(tool.Ifc.get_entity(props.editing_aggregate))
                 if index > 0:
                     aggregate = aggregates_list[index - 1]
-            else:
+            elif aggregates_list:
                 aggregate = aggregates_list[-1]
             if aggregate:
                 aggregates.append(tool.Ifc.get_object(aggregate))
@@ -225,39 +193,11 @@ class AggregateDecorator:
             self.draw_custom_batch(line, decorator_color_unselected)
 
 
-class AggregateModeDecorator:
-    is_installed = False
-    handlers = []
-
-    @classmethod
-    def install(cls, context):
-        if cls.is_installed:
-            cls.uninstall()
-        handler = cls()
-        cls.handlers.append(
-            SpaceView3D.draw_handler_add(handler.draw_aggregate_name, (context,), "WINDOW", "POST_PIXEL")
-        )
-        cls.handlers.append(
-            SpaceView3D.draw_handler_add(handler.draw_aggregate_empty, (context,), "WINDOW", "POST_VIEW")
-        )
-        cls.is_installed = True
-
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
-
-    def draw_batch(self, shader_type, content_pos, color, indices=None):
-        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
-            return
-        shader = self.line_shader if shader_type == "LINES" else self.shader
-        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
-        shader.uniform_float("color", color)
-        batch.draw(shader)
+class AggregateModeDecorator(tool.Blender.ViewportDecorator):
+    draw_methods = (
+        ("draw_aggregate_name", "POST_PIXEL"),
+        ("draw_aggregate_empty", "POST_VIEW"),
+    )
 
     def draw_aggregate_name(self, context):
         if context.mode == "EDIT_MESH":

src/bonsai/bonsai/bim/module/boundary/decorator.py

@@ -56,11 +56,6 @@ class BoundaryDecorator:
         unselected_elements_color = self.addon_prefs.decorator_color_unselected
         special_elements_color = self.addon_prefs.decorator_color_special
 
-        def transparent_color(color, alpha=0.1):
-            color = [i for i in color]
-            color[3] = alpha
-            return color
-
         gpu.state.point_size_set(6)
         gpu.state.blend_set("ALPHA")
 
@@ -109,7 +104,11 @@ class BoundaryDecorator:
 
         if unselected_edges:
             self.draw_batch("LINES", unselected_vertices, special_elements_color, unselected_edges)
-            self.draw_batch("TRIS", unselected_vertices, transparent_color(special_elements_color), unselected_tris)
+            self.draw_batch(
+                "TRIS", unselected_vertices, tool.Blender.transparent_color(special_elements_color), unselected_tris
+            )
         if selected_edges:
             self.draw_batch("LINES", selected_vertices, selected_elements_color, selected_edges)
-            self.draw_batch("TRIS", selected_vertices, transparent_color(selected_elements_color), selected_tris)
+            self.draw_batch(
+                "TRIS", selected_vertices, tool.Blender.transparent_color(selected_elements_color), selected_tris
+            )

src/bonsai/bonsai/bim/module/cad/operator.py

@@ -345,9 +345,17 @@ class CadArcFrom3Points(bpy.types.Operator):
 class CadOffset(bpy.types.Operator):
     bl_idname = "bim.cad_offset"
     bl_label = "CAD Offset"
-    bl_description = "Copy selected mesh geometry at provided offset. Mesh copied based on the current viewport angle."
+    bl_description = (
+        "Offset selected mesh geometry at provided distance, based on the current viewport angle. "
+        "Creates a copy by default, or moves the existing edges if Copy is disabled."
+    )
     bl_options = {"REGISTER", "UNDO"}
     distance: bpy.props.FloatProperty(name="Distance", default=0.1, subtype="DISTANCE")
+    copy: bpy.props.BoolProperty(
+        name="Copy",
+        description="Create a new offset copy of the geometry. If disabled, move the existing edges to the offset location",
+        default=True,
+    )
 
     @classmethod
     def poll(cls, context):
@@ -405,6 +413,11 @@ class CadOffset(bpy.types.Operator):
         rotation = Matrix.Rotation(pi / 2, 2, "Z")
         rotation_i = Matrix.Rotation(-pi / 2, 2, "Z")
 
+        # When not copying, the offset positions are gathered here and applied to
+        # the existing verts only after all loops are processed, so that the
+        # original coordinates are still available while computing offsets.
+        moved_verts = []
+
         # Create loops from edges
         loop_edges = set(edges)
         loops = []
@@ -517,12 +530,15 @@ class CadOffset(bpy.types.Operator):
                     offset_length = self.distance / sqrt((1 + normals[0].dot(normals[1])) / 2)
                     offset = mw.inverted().to_quaternion() @ (wp.to_quaternion() @ (new_normal * offset_length).to_3d())
                     new_vert = v1.co + offset
-                    new_verts.append(bm.verts.new(new_vert))
                 else:
                     normal = (normals[0] * self.distance).to_3d()
                     offset = mw.inverted().to_quaternion() @ (wp.to_quaternion() @ normal)
                     new_vert = v1.co + offset
+
+                if self.copy:
                     new_verts.append(bm.verts.new(new_vert))
+                else:
+                    moved_verts.append((v1, new_vert))
 
                 processed_verts.add(v1.index)
 
@@ -531,9 +547,14 @@ class CadOffset(bpy.types.Operator):
 
                 v1 = v2
 
-            [bm.edges.new((new_verts[i], new_verts[i + 1])) for i in range(len(new_verts) - 1)]
-            if is_closed:
-                bm.edges.new((new_verts[len(new_verts) - 1], new_verts[0]))
+            if self.copy:
+                [bm.edges.new((new_verts[i], new_verts[i + 1])) for i in range(len(new_verts) - 1)]
+                if is_closed:
+                    bm.edges.new((new_verts[len(new_verts) - 1], new_verts[0]))
+
+        # Move the existing edges to the offset location.
+        for vert, new_co in moved_verts:
+            vert.co = new_co
 
         bm.verts.index_update()
         bm.edges.index_update()

src/bonsai/bonsai/bim/module/cad/prop.py

@@ -27,6 +27,11 @@ class BIMCadProperties(PropertyGroup):
     resolution: bpy.props.IntProperty(name="Arc Resolution", min=1, default=1)
     radius: bpy.props.FloatProperty(name="Radius", default=0.1, subtype="DISTANCE")
     distance: bpy.props.FloatProperty(name="Distance", default=0.1, subtype="DISTANCE")
+    copy: bpy.props.BoolProperty(
+        name="Copy",
+        description="Create a new offset copy of the geometry. If disabled, move the existing edges to the offset location",
+        default=True,
+    )
     x: bpy.props.FloatProperty(name="X", default=0.2, subtype="DISTANCE")
     y: bpy.props.FloatProperty(name="Y", default=0.1, subtype="DISTANCE")
     gable_roof_edge_angle: bpy.props.FloatProperty(
@@ -37,6 +42,7 @@ class BIMCadProperties(PropertyGroup):
         resolution: int
         radius: float
         distance: float
+        copy: bool
         x: float
         y: float
         gable_roof_edge_angle: float

src/bonsai/bonsai/bim/module/cad/workspace.py

@@ -256,6 +256,8 @@ class CadHotkey(bpy.types.Operator):
         elif self.hotkey == "S_O":
             row = self.layout.row()
             row.prop(props, "distance")
+            row = self.layout.row()
+            row.prop(props, "copy")
 
         elif self.hotkey == "S_R":
             if tool.Geometry.is_profile_object_active():
@@ -291,7 +293,7 @@ class CadHotkey(bpy.types.Operator):
             bpy.ops.bim.cad_fillet(resolution=self.props.resolution, radius=self.props.radius)
 
     def hotkey_S_O(self):
-        bpy.ops.bim.cad_offset(distance=self.props.distance)
+        bpy.ops.bim.cad_offset(distance=self.props.distance, copy=self.props.copy)
 
     def hotkey_S_Q(self):
         obj = bpy.context.active_object

src/bonsai/bonsai/bim/module/clash/decorator.py

@@ -18,43 +18,17 @@
 
 import blf
 import gpu
-from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
-from gpu_extras.batch import batch_for_shader
 from mathutils import Vector
 
 import bonsai.tool as tool
 
 
-class ClashDecorator:
-    is_installed = False
-    handlers = []
-
-    @classmethod
-    def install(cls, context):
-        if cls.is_installed:
-            cls.uninstall()
-        handler = cls()
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_text, (context,), "WINDOW", "POST_PIXEL"))
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_geometry, (context,), "WINDOW", "POST_VIEW"))
-        cls.is_installed = True
-
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
-
-    def draw_batch(self, shader_type, content_pos, color, indices=None):
-        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
-            return
-        shader = self.line_shader if shader_type == "LINES" else self.shader
-        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
-        shader.uniform_float("color", color)
-        batch.draw(shader)
+class ClashDecorator(tool.Blender.ViewportDecorator):
+    draw_methods = (
+        ("draw_text", "POST_PIXEL"),
+        ("draw_geometry", "POST_VIEW"),
+    )
 
     def draw_text(self, context):
         self.addon_prefs = tool.Blender.get_addon_preferences()

src/bonsai/bonsai/bim/module/clip_box/__init__.py

@@ -0,0 +1,130 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+import bpy
+from bpy.app.handlers import persistent
+
+import bonsai.tool as tool
+
+from . import face_quad, gizmos, operator, prop, ui
+
+classes = (
+    operator.BIM_OT_add_clip_box,
+    operator.BIM_OT_add_clip_box_for_source,
+    operator.BIM_OT_align_view_to_clip_face,
+    operator.BIM_OT_duplicate_clip_box,
+    operator.BIM_OT_remove_clip_box,
+    operator.BIM_OT_set_active_clip_box,
+    operator.BIM_OT_toggle_clip_box_enabled,
+    prop.BIMClipBoxProperties,
+    prop.BIMSceneClipBoxProperties,
+    face_quad.BIM_GT_box_face_quad,
+    face_quad.BIM_GT_box_face_outline,
+    gizmos.OBJECT_GGT_bim_clip_box,
+    ui.BIM_MT_clip_box_add_for_source,
+    ui.BIM_MT_clip_box_info,
+    ui.BIM_MT_clip_box_settings,
+    ui.BIM_UL_clip_box,
+    ui.BIM_PT_clip_box,
+)
+
+
+@persistent
+def _on_depsgraph_update(scene, depsgraph):
+    tool.ClipBox.on_depsgraph_update(scene, depsgraph)
+    tool.ClipBox.on_depsgraph_update_caps(scene, depsgraph)
+
+
+@persistent
+def _on_load_pre(filepath):
+    # Tear down any in-flight clip-box timers before Blender frees the
+    # WM / screens / areas / regions for the loading file. A refresh timer
+    # that survives the teardown fires against the new file's freshly-
+    # allocated regions before their GPU state is wired, CTD-ing inside
+    # GPU_matrix_ortho_set. The gate also blocks the depsgraph IFC-reload
+    # branch and is held closed until on_pre_view fires for the first time
+    # on the new file (first paint = GPU contexts wired).
+    tool.ClipBox._file_loading = True
+    tool.ClipBox._post_load_paint_pending = True
+    tool.ClipBox._cancel_pending_refresh()
+    tool.ClipBox._cancel_pending_cap_rebuild()
+
+
+@persistent
+def _on_load_post(filepath):
+    # The _file_loading gate is NOT cleared here: load_post fires before
+    # the new file's first paint, so GPU contexts may still be uninitialised.
+    # on_pre_view consumes _post_load_paint_pending to open the gate at the
+    # safe moment and kick the post-load re-arm.
+    # Restore the per-scene clip-box list from the project's BBIM_ClipBoxes
+    # pset. Runs after the standard load_post that creates Blender objects.
+    tool.ClipBox._last_seen_object_matrices.clear()
+    tool.ClipBox.load_from_project_pset()
+
+
+_draw_handler_pre = None
+_draw_handler_post = None
+
+
+def register():
+    global _draw_handler_pre, _draw_handler_post
+    bpy.types.Object.BIMClipBoxProperties = bpy.props.PointerProperty(type=prop.BIMClipBoxProperties)
+    bpy.types.Scene.BIMSceneClipBoxProperties = bpy.props.PointerProperty(type=prop.BIMSceneClipBoxProperties)
+    tool.ClipBox.reset_ownership()
+    if _on_depsgraph_update not in bpy.app.handlers.depsgraph_update_post:
+        bpy.app.handlers.depsgraph_update_post.append(_on_depsgraph_update)
+    if _on_load_pre not in bpy.app.handlers.load_pre:
+        bpy.app.handlers.load_pre.append(_on_load_pre)
+    if _on_load_post not in bpy.app.handlers.load_post:
+        bpy.app.handlers.load_post.append(_on_load_post)
+    if _draw_handler_pre is None:
+        _draw_handler_pre = bpy.types.SpaceView3D.draw_handler_add(tool.ClipBox.on_pre_view, (), "WINDOW", "PRE_VIEW")
+    if _draw_handler_post is None:
+        _draw_handler_post = bpy.types.SpaceView3D.draw_handler_add(
+            tool.ClipBox.on_post_view_caps, (), "WINDOW", "POST_VIEW"
+        )
+
+
+def unregister():
+    global _draw_handler_pre, _draw_handler_post
+    if _draw_handler_post is not None:
+        try:
+            bpy.types.SpaceView3D.draw_handler_remove(_draw_handler_post, "WINDOW")
+        except ValueError:
+            pass
+        _draw_handler_post = None
+    if _draw_handler_pre is not None:
+        try:
+            bpy.types.SpaceView3D.draw_handler_remove(_draw_handler_pre, "WINDOW")
+        except ValueError:
+            pass
+        _draw_handler_pre = None
+    if _on_load_post in bpy.app.handlers.load_post:
+        bpy.app.handlers.load_post.remove(_on_load_post)
+    if _on_load_pre in bpy.app.handlers.load_pre:
+        bpy.app.handlers.load_pre.remove(_on_load_pre)
+    if _on_depsgraph_update in bpy.app.handlers.depsgraph_update_post:
+        bpy.app.handlers.depsgraph_update_post.remove(_on_depsgraph_update)
+    tool.ClipBox._cancel_pending_refresh()
+    tool.ClipBox._cancel_pending_cap_rebuild()
+    tool.ClipBox._last_seen_object_matrices.clear()
+    tool.ClipBox.clear_clip_planes()
+    del bpy.types.Object.BIMClipBoxProperties
+    del bpy.types.Scene.BIMSceneClipBoxProperties

src/bonsai/bonsai/bim/module/clip_box/data.py

@@ -0,0 +1,212 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+"""EnumProperty ``items=`` callbacks for the source-based clip-box picker.
+
+Each callback returns ``[(id_str, label, description)]`` where ``id_str`` is
+an IFC entity id stringified for entity-driven kinds, an IFC class name for
+``CLASS``, or a fixed status name for ``STATUS``. The clip-box operator
+turns the picked id into a ``matrix_world`` via the source-preset helper.
+"""
+
+from __future__ import annotations
+
+import bonsai.tool as tool
+
+EnumItems = list[tuple[str, str, str]]
+
+# Module-level cache. Blender's EnumProperty stores raw char pointers from the
+# tuples a callback returns, so the Python strings must outlive the draw call.
+# Stashing the latest result per kind keeps them alive across callback firings.
+_items_cache: dict[str, EnumItems] = {}
+
+# Sentinel id used for the "no options available" placeholder. The operator
+# treats this as an invalid pick and surfaces an ERROR.
+NO_OPTIONS_ID = "__none__"
+
+
+def _cache(kind: str, items: EnumItems) -> EnumItems:
+    _items_cache[kind] = items
+    return items
+
+
+def _no_options(label: str) -> EnumItems:
+    # Blender refuses to draw an EnumProperty with zero entries — show a
+    # placeholder so the dialog renders and the user sees the empty state.
+    return [(NO_OPTIONS_ID, label, "")]
+
+
+def _label(entity, ifc_class: str | None = None) -> str:
+    name = (getattr(entity, "Name", None) or "Unnamed").strip() or "Unnamed"
+    return f"{ifc_class}: {name}" if ifc_class else name
+
+
+def _build_items(kind: str, empty_label: str, build_fn) -> EnumItems:
+    """Shared shape for the IFC-driven enum callbacks.
+
+    Returns the no-IFC placeholder if no file is loaded, then runs
+    ``build_fn(ifc_file)``, sorts the result alphabetically by label, and
+    returns the empty-result placeholder if nothing matched. The output is
+    always routed through the module cache.
+    """
+    ifc = tool.Ifc.get()
+    if ifc is None:
+        return _cache(kind, _no_options("No IFC loaded"))
+    items = build_fn(ifc)
+    items.sort(key=lambda t: t[1].lower())
+    if not items:
+        return _cache(kind, _no_options(empty_label))
+    return _cache(kind, items)
+
+
+# Top-down spatial hierarchy so the picker reads in the order an architect
+# already thinks in, rather than a flat alphabetical mix. IfcSpace is excluded
+# — spaces are typically empty volumes used for room metadata, so clipping to
+# one rarely matches the user intent of "show me what's in this container".
+SPATIAL_CLASSES: tuple[str, ...] = (
+    "IfcProject",
+    "IfcSite",
+    "IfcBuilding",
+    "IfcBuildingStorey",
+)
+
+
+def spatial_items(self, context) -> EnumItems:
+    # Special-case: per-class sort within the hierarchy order rather than a
+    # flat alphabetical sort, so the dropdown reads project → site → building.
+    ifc = tool.Ifc.get()
+    if ifc is None:
+        return _cache("SPATIAL", _no_options("No IFC loaded"))
+    items: EnumItems = []
+    for ifc_class in SPATIAL_CLASSES:
+        try:
+            entities = ifc.by_type(ifc_class, include_subtypes=False)
+        except RuntimeError:
+            continue
+        for entity in sorted(entities, key=lambda e: (e.Name or "").lower()):
+            items.append((str(entity.id()), _label(entity, ifc_class), ""))
+    if not items:
+        return _cache("SPATIAL", _no_options("No spatial containers"))
+    return _cache("SPATIAL", items)
+
+
+def class_items(self, context) -> EnumItems:
+    # Special-case: the picker value IS the IFC class name, not an entity id,
+    # so the build shape differs from the other entity-driven callbacks.
+    ifc = tool.Ifc.get()
+    if ifc is None:
+        return _cache("CLASS", _no_options("No IFC loaded"))
+    # List only IFC classes ACTUALLY present in the file (not the whole
+    # schema), so the user picks from classes that can produce a non-empty
+    # clip volume. ``e.is_a()`` returns the most specific class per element.
+    present = sorted({e.is_a() for e in ifc.by_type("IfcProduct")})
+    if not present:
+        return _cache("CLASS", _no_options("No products"))
+    return _cache("CLASS", [(cls, cls, "") for cls in present])
+
+
+def type_items(self, context) -> EnumItems:
+    return _build_items(
+        "TYPE",
+        "No types defined",
+        lambda ifc: [(str(e.id()), _label(e, e.is_a()), "") for e in ifc.by_type("IfcTypeProduct")],
+    )
+
+
+def material_items(self, context) -> EnumItems:
+    return _build_items(
+        "MATERIAL",
+        "No materials defined",
+        lambda ifc: [(str(e.id()), _label(e), "") for e in ifc.by_type("IfcMaterial")],
+    )
+
+
+def profile_items(self, context) -> EnumItems:
+    # ProfileName is optional. Skip unnamed profiles — they can't be
+    # meaningfully picked from a flat list.
+    return _build_items(
+        "PROFILE",
+        "No named profiles",
+        lambda ifc: [
+            (str(e.id()), f"{e.is_a()}: {e.ProfileName}", "")
+            for e in ifc.by_type("IfcProfileDef")
+            if getattr(e, "ProfileName", None)
+        ],
+    )
+
+
+def drawing_items(self, context) -> EnumItems:
+    return _build_items(
+        "DRAWING",
+        "No drawings defined",
+        lambda ifc: [(str(e.id()), _label(e), "") for e in ifc.by_type("IfcAnnotation") if e.ObjectType == "DRAWING"],
+    )
+
+
+# Display labels for each status value. The id strings on the left are the
+# canonical Pset_*Common.Status enum values accepted by Bonsai's status query.
+STATUS_LABELS: tuple[tuple[str, str], ...] = (
+    ("No Status", "No Status"),
+    ("NEW", "New"),
+    ("EXISTING", "Existing"),
+    ("DEMOLISH", "Demolish"),
+    ("TEMPORARY", "Temporary"),
+    ("OTHER", "Other"),
+    ("NOTKNOWN", "Not Known"),
+    ("UNSET", "Unset"),
+)
+
+
+def status_items(self, context) -> EnumItems:
+    # Fixed enum; no IFC needed. Still routed through the cache to share the
+    # same string-lifetime guarantee as the other callbacks.
+    return _cache("STATUS", [(value, label, "") for value, label in STATUS_LABELS])
+
+
+def system_items(self, context) -> EnumItems:
+    # IfcStructuralAnalysisModel is a structural-grouping container, not a
+    # distribution system — excluded to match Bonsai's other system pickers.
+    return _build_items(
+        "SYSTEM",
+        "No systems defined",
+        lambda ifc: [
+            (str(e.id()), _label(e, e.is_a()), "")
+            for e in ifc.by_type("IfcSystem")
+            if not e.is_a("IfcStructuralAnalysisModel")
+        ],
+    )
+
+
+def group_items(self, context) -> EnumItems:
+    # include_subtypes=False so IfcSystem and IfcZone instances don't appear
+    # under Group as well — those get their own picker entries.
+    return _build_items(
+        "GROUP",
+        "No groups defined",
+        lambda ifc: [(str(e.id()), _label(e), "") for e in ifc.by_type("IfcGroup", include_subtypes=False)],
+    )
+
+
+def zone_items(self, context) -> EnumItems:
+    return _build_items(
+        "ZONE",
+        "No zones defined",
+        lambda ifc: [(str(e.id()), _label(e), "") for e in ifc.by_type("IfcZone")],
+    )

src/bonsai/bonsai/bim/module/clip_box/face_quad.py

@@ -0,0 +1,879 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+"""Generic face-quad resize gizmos for any axis-aligned local box.
+
+This module contains the box-agnostic core of the interactive
+face-resize gizmos: two Gizmo classes (a near-invisible click target
+welded to each face, and a thin colored edge outline), a per-redraw
+orchestrator that places six of each on a box, and the pure one-sided
+resize arithmetic. None of it knows about IFC, clip boxes, or
+``BIMSceneClipBoxProperties`` — a future camera-view-box adapter can
+reuse the same classes and helpers.
+
+Consumer contract — the adapter group must:
+
+1. Create six ``BIM_GT_box_face_quad`` and six ``BIM_GT_box_face_outline``
+   instances at ``setup()`` time, in :data:`FACE_ROUTES` order, and bind
+   each quad's ``move_get_cb`` / ``move_set_cb`` to closures that read
+   and mutate the box's host (e.g. an Empty's ``location`` / ``scale``).
+2. Call :func:`apply_face_quad_layout` from ``refresh()`` /
+   ``draw_prepare()`` with the box's local-frame ``bmin`` / ``bmax``,
+   the host's ``matrix_world``, the OBB rotation as a 4x4
+   (``Matrix.Identity(4)`` when the rotation rides in ``matrix_world``),
+   and the current ``region`` / ``rv3d``.
+3. Implement ``_lock_for(active_gz)`` / ``_unlock_all()`` on the group
+   for drag mutual exclusion; the quad's ``invoke`` / ``exit`` call them.
+
+The resize arithmetic in :func:`compute_face_resize` is pure: feed it
+the modal scalar plus drag-start snapshots and it returns the host's
+new scale-on-axis and new origin location.
+"""
+
+from __future__ import annotations
+
+import math
+from collections.abc import Sequence
+from typing import Any
+
+import bpy
+from bpy_extras.view3d_utils import location_3d_to_region_2d, region_2d_to_location_3d
+from mathutils import Matrix, Vector
+
+# ---------------------------------------------------------------------------
+# Public iteration order
+# ---------------------------------------------------------------------------
+
+# (axis, is_max) pairs. The adapter group's ``setup()`` MUST create its
+# six face-quad gizmos in this order so positional indexing into the
+# layout helper stays correct.
+FACE_ROUTES: tuple[tuple[int, bool], ...] = (
+    (0, False),
+    (0, True),
+    (1, False),
+    (1, True),
+    (2, False),
+    (2, True),
+)
+
+
+# ---------------------------------------------------------------------------
+# Public visual constants (adapter reads these in setup())
+# ---------------------------------------------------------------------------
+
+# Standard XYZ axis colors (Blender convention).
+AXIS_COLOR: dict[int, tuple[float, float, float]] = {
+    0: (1.0, 0.2, 0.2),
+    1: (0.2, 1.0, 0.2),
+    2: (0.2, 0.4, 1.0),
+}
+
+# Documented "selectable but unpainted" trick: the GPU still writes the
+# selection buffer at this alpha so clicks register, but no visible
+# pixels are produced.
+FACE_QUAD_ALPHA: float = 0.001
+
+# Very faint hover tint — just enough to confirm "you're aiming at this
+# face" without painting visibly over geometry behind it.
+FACE_QUAD_ALPHA_HIGHLIGHT: float = 0.04
+
+# Setup-time default for ``select_bias``; the layout helper overwrites
+# it per frame to the front-facing or halo value below. Kept below the
+# canonical arrow bias so a bailed frame can't let a front quad steal
+# clicks meant for a hidden control.
+FACE_QUAD_SELECT_BIAS: float = 0.5
+
+
+# ---------------------------------------------------------------------------
+# Internal constants
+# ---------------------------------------------------------------------------
+
+# Unit quad in the local XY plane spanning [-0.5, 0.5]^2 at z=0. Two
+# CCW triangles viewed from +Z. matrix_basis stretches it onto the
+# face's perpendicular extents.
+_QUAD_TRIS: list[tuple[float, float, float]] = [
+    (-0.5, -0.5, 0.0),
+    (0.5, -0.5, 0.0),
+    (0.5, 0.5, 0.0),
+    (-0.5, -0.5, 0.0),
+    (0.5, 0.5, 0.0),
+    (-0.5, 0.5, 0.0),
+]
+
+# Unit-quad outline as 4 line segments in the local XY plane at z=0.
+_QUAD_OUTLINE_LINES: list[tuple[float, float, float]] = [
+    (-0.5, -0.5, 0.0),
+    (0.5, -0.5, 0.0),
+    (0.5, -0.5, 0.0),
+    (0.5, 0.5, 0.0),
+    (0.5, 0.5, 0.0),
+    (-0.5, 0.5, 0.0),
+    (-0.5, 0.5, 0.0),
+    (-0.5, -0.5, 0.0),
+]
+
+# Degenerate zero-area triangle for hidden back-facing quads with no
+# visible-adjacent neighbours (rare orientation). Blender tolerates
+# this; the gizmo is hidden anyway so nothing renders.
+_EMPTY_TRIS: list[tuple[float, float, float]] = [
+    (0.0, 0.0, 0.0),
+    (0.0, 0.0, 0.0),
+    (0.0, 0.0, 0.0),
+]
+
+# Rotates the gizmo's local +Z onto the outward face normal in the
+# box's local frame. Right-hand rotation around the named axis.
+_AXIS_ORIENT: dict[tuple[int, bool], Matrix] = {
+    (0, False): Matrix.Rotation(-math.pi / 2, 4, "Y"),
+    (0, True): Matrix.Rotation(math.pi / 2, 4, "Y"),
+    (1, False): Matrix.Rotation(math.pi / 2, 4, "X"),
+    (1, True): Matrix.Rotation(-math.pi / 2, 4, "X"),
+    (2, False): Matrix.Rotation(math.pi, 4, "X"),
+    (2, True): Matrix.Identity(4),
+}
+
+# Per-face mapping from face-quad local axes to local box axes for the
+# perpendicular-extent scale. ``(w_axis, h_axis)`` — the box-local axis
+# indices the quad's local X and Y span after the orientation rotation.
+_QUAD_PERP_AXES: dict[tuple[int, bool], tuple[int, int]] = {
+    (0, False): (2, 1),
+    (0, True): (2, 1),
+    (1, False): (0, 2),
+    (1, True): (0, 2),
+    (2, False): (0, 1),
+    (2, True): (0, 1),
+}
+
+# Front-facing quad sits ABOVE the halo strips so the cursor on the
+# visible face area always grabs the visible face, never accidentally
+# routes to a back-face halo strip in an adjacent screen region.
+_FACE_QUAD_FRONT_FACING_SELECT_BIAS: float = 1.5
+_FACE_QUAD_HALO_FRAME_SELECT_BIAS: float = 1.0
+
+# Target halo-strip thickness in screen pixels. The world-space margin
+# is recomputed per frame so the rim stays a roughly constant on-screen
+# size regardless of viewport zoom.
+_FACE_QUAD_HALO_TARGET_PIXELS: float = 20.0
+
+# Minimum world half-extent a face resize may shrink to. Stops a drag
+# from collapsing the host to zero or negative scale.
+_MIN_HALF_EXTENT: float = 1e-4
+
+
+# ---------------------------------------------------------------------------
+# Pure predicates (testable without Blender)
+# ---------------------------------------------------------------------------
+
+Vec3 = tuple[float, float, float]
+
+
+def face_outward_axis_local(axis: int, is_max: bool) -> Vec3:
+    """Un-rotated outward face normal in the box's local AABB coords.
+
+    For ``(axis=0, is_max=True)`` returns ``(+1, 0, 0)``; for the −X
+    face ``(-1, 0, 0)``; etc. The rotated world normal is obtained by
+    applying the host's rotation and the OBB rotation:
+    ``mw_rot @ cage_rotation @ this``.
+    """
+    sign = 1.0 if is_max else -1.0
+    out = [0.0, 0.0, 0.0]
+    out[axis] = sign
+    return (out[0], out[1], out[2])
+
+
+def front_facing_face_mask(
+    face_normals_world: Sequence[Vec3],
+    view_dir_world: Vec3,
+    eps: float = 1e-6,
+) -> tuple[bool, ...]:
+    """Which of the 6 box faces point toward the camera.
+
+    A face is front-facing iff its outward normal points AGAINST the
+    view direction (``dot(normal, view_dir) < -eps``). The ``-eps``
+    margin prevents flicker at grazing angles.
+
+    ``face_normals_world`` must be in :data:`FACE_ROUTES` order; returns
+    a 6-tuple of bool parallel to that order.
+    """
+    if len(face_normals_world) != 6:
+        msg = f"expected 6 face normals, got {len(face_normals_world)}"
+        raise ValueError(msg)
+    vx, vy, vz = view_dir_world
+    return tuple((n[0] * vx + n[1] * vy + n[2] * vz) < -eps for n in face_normals_world)
+
+
+def view_axis_parallel_face_mask(
+    face_normals_world: Sequence[Vec3],
+    view_dir_world: Vec3,
+    threshold: float = 0.95,
+) -> tuple[bool, ...]:
+    """Which faces have normals (anti-)parallel to the view direction.
+
+    True iff ``abs(dot(normal, view_dir)) >= threshold`` — i.e. the
+    face is nearly perpendicular to the screen plane. Provided as a
+    pure predicate for callers that want to detect degenerate-drag
+    conditions; the layout helper itself no longer gates on it.
+    """
+    if len(face_normals_world) != 6:
+        msg = f"expected 6 face normals, got {len(face_normals_world)}"
+        raise ValueError(msg)
+    vx, vy, vz = view_dir_world
+    return tuple(abs(n[0] * vx + n[1] * vy + n[2] * vz) >= threshold for n in face_normals_world)
+
+
+# ---------------------------------------------------------------------------
+# Pure resize arithmetic
+# ---------------------------------------------------------------------------
+
+
+def compute_face_resize(
+    *,
+    value: float,
+    init_world_half: float,
+    init_location: tuple[float, float, float],
+    world_axis: tuple[float, float, float],
+    display_size: float,
+) -> tuple[float, tuple[float, float, float]]:
+    """Pure one-sided face-resize arithmetic.
+
+    Returns ``(new_scale_axis, new_location)`` — the host's new scale
+    on the dragged axis and its new world origin — such that the
+    dragged face moves by the modal's outward delta while the OPPOSITE
+    face stays put.
+
+    ``value`` is ``init + delta``, where ``init`` is the unsigned
+    drag-start world half-extent and ``delta`` is the cursor projection
+    onto the face's OUTWARD world normal. Realized half-extent is
+    clamped to a small floor; the location shift uses the realized
+    (post-clamp) delta so the opposite face stays fixed even at the
+    clamp.
+    """
+    face_delta = value - init_world_half
+    new_world_half = init_world_half + 0.5 * face_delta
+    if new_world_half < _MIN_HALF_EXTENT:
+        new_world_half = _MIN_HALF_EXTENT
+    realized_delta = 2.0 * (new_world_half - init_world_half)
+
+    ds = display_size if display_size != 0.0 else 1.0
+    new_scale_axis = new_world_half / ds
+    shift = 0.5 * realized_delta
+    new_location = (
+        init_location[0] + shift * world_axis[0],
+        init_location[1] + shift * world_axis[1],
+        init_location[2] + shift * world_axis[2],
+    )
+    return new_scale_axis, new_location
+
+
+# ---------------------------------------------------------------------------
+# Internal geometry helpers
+# ---------------------------------------------------------------------------
+
+
+def _compute_face_quad_scale(bmin: Any, bmax: Any, axis: int, is_max: bool) -> tuple[float, float]:
+    """Return ``(w, h)`` for the face quad's scale matrix."""
+    w_axis, h_axis = _QUAD_PERP_AXES[(axis, is_max)]
+    w = float(bmax[w_axis] - bmin[w_axis])
+    h = float(bmax[h_axis] - bmin[h_axis])
+    return w, h
+
+
+def _shared_edge_corner_keys(
+    axis_a: int, is_max_a: bool, axis_b: int, is_max_b: bool
+) -> tuple[tuple[int, int, int], tuple[int, int, int]] | None:
+    """Return the 2 corner-bit triples shared by two adjacent faces.
+
+    Corner keys are 3-tuples of bits (0 = bmin, 1 = bmax). The two
+    returned corners are ordered with the free-axis bit ascending.
+    """
+    if axis_a == axis_b:
+        return None
+    free_axis = 3 - axis_a - axis_b
+    bit_a = 1 if is_max_a else 0
+    bit_b = 1 if is_max_b else 0
+    corner_lo = [0, 0, 0]
+    corner_hi = [0, 0, 0]
+    corner_lo[axis_a] = bit_a
+    corner_hi[axis_a] = bit_a
+    corner_lo[axis_b] = bit_b
+    corner_hi[axis_b] = bit_b
+    corner_lo[free_axis] = 0
+    corner_hi[free_axis] = 1
+    return (
+        (corner_lo[0], corner_lo[1], corner_lo[2]),
+        (corner_hi[0], corner_hi[1], corner_hi[2]),
+    )
+
+
+def _face_corner_keys(axis: int, is_max: bool) -> tuple[
+    tuple[int, int, int],
+    tuple[int, int, int],
+    tuple[int, int, int],
+    tuple[int, int, int],
+]:
+    """Return the 4 corner-bit triples of a face in CCW order.
+
+    Triangulation as ``[(0,1,2), (0,2,3)]`` covers the whole face with
+    two non-overlapping triangles.
+    """
+    fixed_bit = 1 if is_max else 0
+    free_axes = [a for a in (0, 1, 2) if a != axis]
+    fa0, fa1 = free_axes
+    corners = []
+    for ka, kb in ((0, 0), (1, 0), (1, 1), (0, 1)):
+        key = [0, 0, 0]
+        key[axis] = fixed_bit
+        key[fa0] = ka
+        key[fa1] = kb
+        corners.append((key[0], key[1], key[2]))
+    return (corners[0], corners[1], corners[2], corners[3])
+
+
+def _build_strip_tris_relative(
+    edge_p0_local: tuple[float, float, float],
+    edge_p1_local: tuple[float, float, float],
+    extrusion_local: tuple[float, float, float],
+) -> list[tuple[float, float, float]]:
+    """Build two CCW triangles (6 vertices) for a thin halo strip.
+
+    All inputs are in coords relative to the gizmo's ``matrix_basis``
+    anchor. The strip runs along ``[edge_p0_local, edge_p1_local]`` and
+    extrudes by ``extrusion_local`` perpendicular to the edge.
+    """
+    p0x, p0y, p0z = edge_p0_local
+    p1x, p1y, p1z = edge_p1_local
+    ex, ey, ez = extrusion_local
+    p0e = (p0x + ex, p0y + ey, p0z + ez)
+    p1e = (p1x + ex, p1y + ey, p1z + ez)
+    return [
+        (p0x, p0y, p0z),
+        p0e,
+        p1e,
+        (p0x, p0y, p0z),
+        p1e,
+        (p1x, p1y, p1z),
+    ]
+
+
+def _strips_geometry_changed(quad_gz, face_quad_local, all_tris) -> bool:
+    """True if the back-face quad's geometry differs from the cached upload.
+
+    Pure orbit/pan doesn't change either the box pose or the cage
+    rotation, so the computed strip vertices are byte-identical to the
+    previous frame's. Hitting the cache lets the back-facing branch
+    skip ``new_custom_shape`` and the GPU upload.
+    """
+    cached = getattr(quad_gz, "_strips_cache_key", None)
+    last_state = getattr(quad_gz, "_last_geometry_state", None)
+    key = (face_quad_local, all_tris)
+    if cached is None or last_state != "strips" or cached != key:
+        quad_gz._strips_cache_key = key
+        quad_gz._last_geometry_state = "strips"
+        return True
+    return False
+
+
+def _compute_face_basis(
+    mw: Any,
+    mw_rot: Any,
+    cage_rotation: Any,
+    pivot_local: Any,
+    face_local: Any,
+    orient: Any,
+) -> tuple[Any, Any]:
+    """World-space (translation, outward-normal-direction) for one face."""
+    rotated_face_local = cage_rotation.to_3x3() @ (face_local - pivot_local) + pivot_local
+    face_world = mw @ rotated_face_local
+    world_axis = (mw_rot @ cage_rotation.to_3x3() @ (orient.to_3x3() @ Vector((0.0, 0.0, 1.0)))).normalized()
+    return face_world, world_axis
+
+
+def _compose_face_matrix_basis(
+    face_world: Any,
+    mw_rot_scale: Any,
+    cage_rotation: Any,
+    orient: Any,
+    w: float,
+    h: float,
+) -> Any:
+    """Compose the 5-term ``matrix_basis`` for a face-plane gizmo.
+
+    Returns ``Translation @ mw_rot_scale @ cage_rotation @ orient @
+    Diagonal((w, h, 1, 1))`` — maps a unit-square local quad onto the
+    world-space face rectangle, including the host's scale.
+    """
+    quad_scale = Matrix.Diagonal((w, h, 1.0, 1.0))
+    return Matrix.Translation(face_world) @ mw_rot_scale.to_4x4() @ cage_rotation @ orient @ quad_scale
+
+
+def _compute_box_corners_world(
+    bmin: Any,
+    bmax: Any,
+    pivot_local: Any,
+    cage_rotation_3x3: Any,
+    mw: Any,
+) -> dict[tuple[int, int, int], Any]:
+    """Return the 8 OBB corners in world space, keyed by bit-triple."""
+    corners: dict[tuple[int, int, int], Any] = {}
+    for ix in (0, 1):
+        for iy in (0, 1):
+            for iz in (0, 1):
+                local = Vector(
+                    (
+                        float(bmax.x if ix else bmin.x),
+                        float(bmax.y if iy else bmin.y),
+                        float(bmax.z if iz else bmin.z),
+                    )
+                )
+                rotated = cage_rotation_3x3 @ (local - pivot_local) + pivot_local
+                corners[(ix, iy, iz)] = mw @ rotated
+    return corners
+
+
+def _abs_scale_matrix(mw: Any) -> Any:
+    """Return a copy of ``mw`` with all scale components ``abs()``-ed.
+
+    Without this, a negative-scale host produces a visible/clickable
+    face inversion: ``mw @ local_vec`` flips the +axis face onto the
+    -axis world side, while the rotation-only normal stays pointing
+    in the +axis direction — so the gizmo for "the +X face" sits at
+    world -X but reports its outward normal as +X.
+    """
+    loc, rot, scale = mw.decompose()
+    abs_scale = Vector((abs(scale.x), abs(scale.y), abs(scale.z)))
+    return Matrix.LocRotScale(loc, rot, abs_scale)
+
+
+def _world_radius_to_screen_pixels(
+    region: Any,
+    rv3d: Any,
+    center_world: Vector,
+    world_radius: float,
+    *,
+    min_pixels: float = 0.0,
+) -> float:
+    """Return the on-screen pixel radius of a world-space circle.
+
+    Projects ``center_world`` and a sample point offset by
+    ``world_radius`` along the camera's view-aligned right axis to
+    region pixels, and returns the screen-pixel distance between them.
+    Falls back to ``min_pixels`` if either projection fails.
+    """
+    try:
+        view_inv = rv3d.view_matrix.inverted()
+        right = Vector((view_inv[0][0], view_inv[0][1], view_inv[0][2])).normalized()
+    except (AttributeError, ValueError):
+        right = Vector((1.0, 0.0, 0.0))
+    sample_world = center_world + right * world_radius
+    return _world_segment_to_screen_pixels(region, rv3d, center_world, sample_world, min_pixels=min_pixels)
+
+
+def _world_segment_to_screen_pixels(
+    region: Any,
+    rv3d: Any,
+    p0_world: Vector,
+    p1_world: Vector,
+    *,
+    min_pixels: float = 0.0,
+) -> float:
+    """Return the on-screen pixel length of an arbitrary world segment.
+
+    Unlike :func:`_world_radius_to_screen_pixels`, this measures the
+    ACTUAL projected length of the segment — foreshortening included.
+    Use this when the segment direction is known to be oblique to the
+    screen plane (e.g. a back face's outward normal): a perpendicular
+    radius measurement overestimates the on-screen length, leaving
+    halo strips visually narrower than the requested pixel target.
+    """
+    p0 = location_3d_to_region_2d(region, rv3d, p0_world)
+    p1 = location_3d_to_region_2d(region, rv3d, p1_world)
+    if not p0 or not p1:
+        return min_pixels
+    dx = float(p1[0]) - float(p0[0])
+    dy = float(p1[1]) - float(p0[1])
+    return max(min_pixels, (dx * dx + dy * dy) ** 0.5)
+
+
+# ---------------------------------------------------------------------------
+# Gizmo classes
+# ---------------------------------------------------------------------------
+
+
+class BIM_GT_box_face_quad(bpy.types.Gizmo):  # noqa: N801 — Blender bl_idname convention
+    """Near-invisible face-quad click target with drag-to-resize modal.
+
+    Geometry: a unit quad in the local XY plane at z=0. The adapter
+    group's layout helper rotates and scales it onto the face plane;
+    the quad is welded to the world face (``use_draw_scale = False``).
+    """
+
+    bl_idname = "BIM_GT_box_face_quad"
+    bl_target_properties = ({"id": "offset", "type": "FLOAT", "array_length": 1},)
+
+    __slots__ = (
+        "custom_shape",
+        "custom_shape_select",
+        "init_value",
+        "move_get_cb",
+        "move_set_cb",
+        "axis",
+        "start_location",
+        "depth_point",
+        "callback",
+        "ctrl_click_cb",
+        "_group",
+        "_face_axis",
+        "is_max",
+        "_drag_snapshot",
+        "_last_geometry_state",
+        "_strips_cache_key",
+    )
+
+    def draw(self, context: Any) -> None:
+        self.draw_custom_shape(self.custom_shape)
+
+    def draw_select(self, context: Any, select_id: int) -> None:
+        # Back-facing quads bind ``custom_shape_select`` to the halo-strip
+        # TRIS so clicks OUTSIDE the box silhouette catch the back face.
+        # Front-facing quads leave it None and reuse ``custom_shape``.
+        shape = getattr(self, "custom_shape_select", None) or self.custom_shape
+        self.draw_custom_shape(shape, select_id=select_id)
+
+    def setup(self) -> None:
+        if not hasattr(self, "custom_shape_"):
+            self.custom_shape = self.new_custom_shape("TRIS", _QUAD_TRIS)
+        self.custom_shape_select = None
+        # Quad welded to world geometry — clicks must align with the
+        # visible face, not a screen-size widget. Disables Blender's
+        # per-frame pixel-constant autoscale.
+        self.use_draw_scale = False
+
+    # ---- modal -------------------------------------------------------------
+
+    def invoke(self, context: Any, event: Any) -> set[str]:
+        # CTRL+click handoff: dispatch a host-defined callback (e.g.
+        # align-view) instead of starting a drag.
+        if event.ctrl and getattr(self, "ctrl_click_cb", None) is not None:
+            self.ctrl_click_cb(context, event)
+            return {"FINISHED"}
+
+        region = context.region
+        rv3d = context.region_data
+        if region is None or rv3d is None:
+            return {"CANCELLED"}
+        self.init_value = self.move_get_cb()
+        # Freeze the projection plane at invoke — projection-plane
+        # drift on tilted axes causes exponential delta runaway.
+        self.depth_point = self.matrix_basis.translation.copy()
+        self.start_location = region_2d_to_location_3d(region, rv3d, (event.mouse_x, event.mouse_y), self.depth_point)
+
+        if getattr(self, "_group", None) is not None:
+            self._group._lock_for(self)
+        return {"RUNNING_MODAL"}
+
+    def exit(self, context: Any, cancel: bool) -> None:
+        try:
+            if context.area:
+                context.area.header_text_set(None)
+            if cancel:
+                self.move_set_cb(self.init_value)
+            if hasattr(self, "callback"):
+                self.callback(self.move_get_cb())
+        finally:
+            self._drag_snapshot = None
+            if getattr(self, "_group", None) is not None:
+                self._group._unlock_all()
+
+    def modal(self, context: Any, event: Any, tweak: set[str]) -> set[str]:
+        if event.type == "ESC":
+            return {"CANCELLED"}
+        region = context.region
+        rv3d = context.region_data
+        if region is None or rv3d is None:
+            return {"CANCELLED"}
+        end_location = region_2d_to_location_3d(region, rv3d, (event.mouse_x, event.mouse_y), self.depth_point)
+        delta = (end_location - self.start_location).dot(self.axis)
+        if "SNAP" in tweak:
+            delta = round(delta, 1)
+        if "PRECISE" in tweak:
+            delta /= 10.0
+        self.move_set_cb(self.init_value + delta)
+        if context.area:
+            context.area.header_text_set(f"Value: {self.move_get_cb():.3f} ({delta:.3f})")
+        return {"RUNNING_MODAL"}
+
+
+class BIM_GT_box_face_outline(bpy.types.Gizmo):  # noqa: N801 — Blender bl_idname convention
+    """Thin non-interactive colored edge outline for one face.
+
+    Drawn as 4 line segments in the face plane. The layout helper
+    toggles its ``alpha`` between near-zero and ``1.0`` based on the
+    sibling face-quad's ``is_highlight`` state — so hovering the quad
+    lights up the matching outline. ``hide_select = True`` keeps the
+    outline out of the GPU selection buffer.
+    """
+
+    bl_idname = "BIM_GT_box_face_outline"
+    bl_target_properties = ()
+
+    __slots__ = (
+        "custom_shape",
+        "_face_axis",
+        "is_max",
+        "_last_outline_state",
+    )
+
+    def draw(self, context: Any) -> None:
+        self.draw_custom_shape(self.custom_shape)
+
+    def draw_select(self, context: Any, select_id: int) -> None:
+        return None
+
+    def setup(self) -> None:
+        if not hasattr(self, "custom_shape_"):
+            self.custom_shape = self.new_custom_shape("LINES", _QUAD_OUTLINE_LINES)
+        self.use_draw_scale = False
+        self.hide_select = True
+        self._last_outline_state = "unit"
+
+
+# ---------------------------------------------------------------------------
+# Per-redraw orchestrator
+# ---------------------------------------------------------------------------
+
+
+def apply_face_quad_layout(
+    *,
+    quad_gizmos,
+    outline_gizmos,
+    bmin: Any,
+    bmax: Any,
+    matrix_world: Any,
+    cage_rotation: Any,
+    region: Any,
+    rv3d: Any,
+    locked: bool,
+) -> None:
+    """Lay out 6 face quads + 6 outlines on the box for this redraw.
+
+    ``quad_gizmos`` / ``outline_gizmos`` are length-6 sequences in
+    :data:`FACE_ROUTES` order. ``bmin`` / ``bmax`` are the box corners
+    in the host's local frame; ``matrix_world`` is the host's world
+    matrix; ``cage_rotation`` is the OBB rotation as a 4x4 (use
+    ``Matrix.Identity(4)`` when rotation rides in ``matrix_world``).
+    ``region`` / ``rv3d`` drive the view-dependent front/back split and
+    the screen-constant halo margin; passing ``rv3d = None`` bails.
+
+    Negative scale on the host is normalized to positive internally so
+    the visible cube and the clickable face gizmos stay aligned —
+    callers don't need to pre-process ``matrix_world``.
+
+    When ``locked`` (a drag is active), ``hide`` / ``select_bias``
+    writes are skipped — the active quad's geometry is still refreshed
+    so it tracks the moving box.
+    """
+    if rv3d is None or getattr(rv3d, "view_rotation", None) is None:
+        return
+    if len(quad_gizmos) != 6 or len(outline_gizmos) != 6:
+        return
+
+    mw = _abs_scale_matrix(matrix_world)
+    mw_rot = mw.to_quaternion().to_matrix()
+    mw_rot_scale = mw.to_3x3()
+    cage_rotation_3x3 = cage_rotation.to_3x3()
+    pivot_local = (bmin + bmax) * 0.5
+    box_center_local = pivot_local
+    face_midpoints_local = {
+        (0, False): Vector((float(bmin.x), box_center_local.y, box_center_local.z)),
+        (0, True): Vector((float(bmax.x), box_center_local.y, box_center_local.z)),
+        (1, False): Vector((box_center_local.x, float(bmin.y), box_center_local.z)),
+        (1, True): Vector((box_center_local.x, float(bmax.y), box_center_local.z)),
+        (2, False): Vector((box_center_local.x, box_center_local.y, float(bmin.z))),
+        (2, True): Vector((box_center_local.x, box_center_local.y, float(bmax.z))),
+    }
+
+    view_dir = (rv3d.view_rotation @ Vector((0.0, 0.0, -1.0))).normalized()
+    view_dir_tuple = (float(view_dir.x), float(view_dir.y), float(view_dir.z))
+    face_normals_world = []
+    for route_axis, route_is_max in FACE_ROUTES:
+        axis_local = Vector(face_outward_axis_local(route_axis, route_is_max))
+        n_world = (mw_rot @ cage_rotation_3x3 @ axis_local).normalized()
+        face_normals_world.append((float(n_world.x), float(n_world.y), float(n_world.z)))
+    front = front_facing_face_mask(tuple(face_normals_world), view_dir_tuple)
+
+    box_center_world = mw @ pivot_local
+    corners_world = _compute_box_corners_world(bmin, bmax, pivot_local, cage_rotation_3x3, mw)
+    route_to_index = {route: i for i, route in enumerate(FACE_ROUTES)}
+
+    for i, route in enumerate(FACE_ROUTES):
+        quad_gz = quad_gizmos[i]
+        is_front = front[i]
+        axis_b, is_max_b = route
+
+        # Place the colored OUTLINE on every face using the same composed
+        # face matrix the front-facing solid quad uses. Hidden/shown via
+        # alpha at the end of the pass.
+        outline_orient = _AXIS_ORIENT[route]
+        outline_face_world, _outline_axis = _compute_face_basis(
+            mw,
+            mw_rot,
+            cage_rotation,
+            pivot_local,
+            face_midpoints_local[route],
+            outline_orient,
+        )
+        ow, oh = _compute_face_quad_scale(bmin, bmax, axis_b, is_max_b)
+        outline_gizmos[i].matrix_basis = _compose_face_matrix_basis(
+            outline_face_world, mw_rot_scale, cage_rotation, outline_orient, ow, oh
+        )
+
+        if is_front:
+            if not locked:
+                quad_gz.hide = False
+                quad_gz.select_bias = _FACE_QUAD_FRONT_FACING_SELECT_BIAS
+            orient = _AXIS_ORIENT[route]
+            face_world, world_axis = _compute_face_basis(
+                mw,
+                mw_rot,
+                cage_rotation,
+                pivot_local,
+                face_midpoints_local[route],
+                orient,
+            )
+            w, h = _compute_face_quad_scale(bmin, bmax, axis_b, is_max_b)
+            quad_gz.matrix_basis = _compose_face_matrix_basis(face_world, mw_rot_scale, cage_rotation, orient, w, h)
+            quad_gz.axis = world_axis
+            if getattr(quad_gz, "_last_geometry_state", None) != "solid":
+                quad_gz.custom_shape = quad_gz.new_custom_shape("TRIS", _QUAD_TRIS)
+                quad_gz.custom_shape_select = None
+                quad_gz._last_geometry_state = "solid"
+            continue
+
+        # Back-facing: anchor at the back face centre; build halo strips
+        # in the planes of the adjacent FRONT faces, extruded outside
+        # the silhouette toward this face's outward normal.
+        face_world = mw @ (cage_rotation_3x3 @ (face_midpoints_local[route] - pivot_local) + pivot_local)
+        quad_gz.matrix_basis = Matrix.Translation(face_world)
+        quad_gz.axis = (mw_rot @ cage_rotation_3x3 @ Vector(face_outward_axis_local(axis_b, is_max_b))).normalized()
+
+        adjacent_front_routes = [
+            (axis_a, is_max_a)
+            for axis_a in range(3)
+            if axis_a != axis_b
+            for is_max_a in (False, True)
+            if front[route_to_index[(axis_a, is_max_a)]]
+        ]
+        # Per-face world margin: measure the screen-projected length of
+        # ONE world unit along THIS face's outward normal. The world
+        # margin that yields ~N pixels on screen is then ``N / length``.
+        # Foreshortening on oblique faces shortens the projected step,
+        # so the world step must grow to keep the strip the same width
+        # on screen.
+        face_world_margin = 0.0
+        if region is not None:
+            sample_end = box_center_world + quad_gz.axis * 1.0
+            screen_step = _world_segment_to_screen_pixels(region, rv3d, box_center_world, sample_end, min_pixels=0.0)
+            if screen_step > 0.0:
+                face_world_margin = _FACE_QUAD_HALO_TARGET_PIXELS / screen_step
+        if face_world_margin <= 0.0 or not adjacent_front_routes:
+            if not locked:
+                quad_gz.hide = True
+                quad_gz.select_bias = _FACE_QUAD_HALO_FRAME_SELECT_BIAS
+            if getattr(quad_gz, "_last_geometry_state", None) != "empty":
+                quad_gz.custom_shape = quad_gz.new_custom_shape("TRIS", _EMPTY_TRIS)
+                quad_gz.custom_shape_select = None
+                quad_gz._last_geometry_state = "empty"
+            continue
+
+        extrusion_world = quad_gz.axis * face_world_margin
+        extrusion_local = (
+            float(extrusion_world.x),
+            float(extrusion_world.y),
+            float(extrusion_world.z),
+        )
+        all_tris: list[tuple[float, float, float]] = []
+        for axis_a, is_max_a in adjacent_front_routes:
+            edge_keys = _shared_edge_corner_keys(axis_a, is_max_a, axis_b, is_max_b)
+            if edge_keys is None:
+                continue
+            key0, key1 = edge_keys
+            wp0 = corners_world[key0]
+            wp1 = corners_world[key1]
+            local_p0 = (
+                float(wp0.x - face_world.x),
+                float(wp0.y - face_world.y),
+                float(wp0.z - face_world.z),
+            )
+            local_p1 = (
+                float(wp1.x - face_world.x),
+                float(wp1.y - face_world.y),
+                float(wp1.z - face_world.z),
+            )
+            all_tris.extend(_build_strip_tris_relative(local_p0, local_p1, extrusion_local))
+
+        if not locked:
+            quad_gz.hide = False
+            quad_gz.select_bias = _FACE_QUAD_HALO_FRAME_SELECT_BIAS
+
+        corner_keys = _face_corner_keys(axis_b, is_max_b)
+        wc_local = [
+            (
+                float(corners_world[k].x - face_world.x),
+                float(corners_world[k].y - face_world.y),
+                float(corners_world[k].z - face_world.z),
+            )
+            for k in corner_keys
+        ]
+        face_quad_local = [
+            wc_local[0],
+            wc_local[1],
+            wc_local[2],
+            wc_local[0],
+            wc_local[2],
+            wc_local[3],
+        ]
+        if _strips_geometry_changed(quad_gz, tuple(face_quad_local), tuple(all_tris)):
+            quad_gz.custom_shape = quad_gz.new_custom_shape("TRIS", face_quad_local)
+            quad_gz.custom_shape_select = quad_gz.new_custom_shape("TRIS", all_tris)
+        quad_gz._last_geometry_state = "strips"
+
+    # Outline alpha follows ONLY the hovered quad's own state — light
+    # the outline of the face under the cursor, nothing else.
+    if not locked:
+        for outline_gz, quad_gz in zip(outline_gizmos, quad_gizmos, strict=True):
+            lit = bool(getattr(quad_gz, "is_highlight", False))
+            outline_gz.alpha = 1.0 if lit else 0.0
+            outline_gz.alpha_highlight = 1.0 if lit else 0.0
+
+
+__all__ = [
+    "AXIS_COLOR",
+    "FACE_QUAD_ALPHA",
+    "FACE_QUAD_ALPHA_HIGHLIGHT",
+    "FACE_QUAD_SELECT_BIAS",
+    "FACE_ROUTES",
+    "BIM_GT_box_face_outline",
+    "BIM_GT_box_face_quad",
+    "apply_face_quad_layout",
+    "compute_face_resize",
+    "face_outward_axis_local",
+    "front_facing_face_mask",
+    "view_axis_parallel_face_mask",
+]

src/bonsai/bonsai/bim/module/clip_box/gizmos.py

@@ -0,0 +1,312 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+"""Interactive face-quad resize gizmos for the active clip box.
+
+Adapter group that binds the generic :mod:`face_quad` core to a Bonsai
+clip-box Empty: six near-invisible click quads + six edge outlines on
+the cube's faces. Dragging a face does a ONE-SIDED resize — the dragged
+face moves along its outward world normal while the opposite face stays
+put — by writing the empty's ``location`` and ``scale``. Bonsai's
+depsgraph handler then re-arms the clip planes from the new matrix.
+"""
+
+from __future__ import annotations
+
+import contextlib
+from typing import Any
+
+import bpy
+from mathutils import Matrix, Vector
+
+import bonsai.tool as tool
+
+from . import face_quad
+
+# Local-frame bounds of the empty's CUBE display. The display spans
+# ``[-empty_display_size, +empty_display_size]^3``; Bonsai always sets
+# ``empty_display_size = 1.0`` on clip-box hosts, so the local box is
+# the unit cube. The empty's per-axis scale + rotation + translation
+# ride in ``matrix_world``, which the layout helper applies.
+_LOCAL_BMIN = Vector((-1.0, -1.0, -1.0))
+_LOCAL_BMAX = Vector((1.0, 1.0, 1.0))
+
+
+def _world_axis(empty: bpy.types.Object, axis: int, is_max: bool) -> Vector:
+    """Outward world-space unit normal of the ``(axis, is_max)`` face.
+
+    Uses the rotation-only matrix so a negative-scale empty doesn't
+    flip the resulting direction — the visible "+X face" then stays
+    associated with world +X (transformed through rotation).
+    """
+    rot_mat = empty.matrix_world.to_quaternion().to_matrix()
+    n = Vector(rot_mat.col[axis])
+    if n.length <= 0.0:
+        return Vector((0.0, 0.0, 0.0))
+    n.normalize()
+    return n if is_max else -n
+
+
+def _world_half_extent(empty: bpy.types.Object, axis: int) -> float:
+    """The empty's box half-extent along local ``axis`` in WORLD units.
+
+    A CUBE empty's local cube is ``±empty_display_size``; ``matrix_world``
+    stretches it by the column length on ``axis``. So the world
+    half-extent is ``|column[axis]| * empty_display_size``.
+    """
+    col_len = empty.matrix_world.to_3x3().col[axis].length
+    display_size = abs(float(getattr(empty, "empty_display_size", 1.0) or 1.0))
+    return float(col_len) * display_size
+
+
+def _make_face_get_cb(gz: Any, group: Any, axis: int, is_max: bool):
+    """Closure returning the world half-extent at drag start and
+    snapshotting the empty's full transform on the gizmo instance.
+
+    The snapshot lives on the gizmo (not the group) so a PERSISTENT
+    group servicing multiple clip boxes can't bleed one drag's state
+    onto another. Cleared on ``exit`` by the shared face-quad hook.
+    """
+
+    def getter() -> float:
+        empty = group._empty
+        if empty is None:
+            return 0.0
+        existing = getattr(gz, "_drag_snapshot", None)
+        if existing is not None and existing.get("empty_name") == getattr(empty, "name", None):
+            return float(existing["world_half"])
+
+        world_half = _world_half_extent(empty, axis)
+        display_size = abs(float(getattr(empty, "empty_display_size", 1.0) or 1.0))
+        gz._drag_snapshot = {
+            "empty_name": getattr(empty, "name", None),
+            "world_half": world_half,
+            "location": tuple(float(v) for v in empty.location),
+            "scale": tuple(float(v) for v in empty.scale),
+            "display_size": display_size if display_size != 0.0 else 1.0,
+            "world_axis": tuple(_world_axis(empty, axis, is_max)),
+        }
+        return float(world_half)
+
+    return getter
+
+
+def _make_ctrl_click_cb(axis: int, is_max: bool):
+    """Closure that dispatches CTRL+click on a face to the align-view operator.
+
+    Routing through an operator (rather than mutating ``rv3d`` here)
+    keeps the action F3-searchable and undoable.
+    """
+
+    def _callback(_context: Any, _event: Any) -> None:
+        bpy.ops.bim.align_view_to_clip_face("INVOKE_DEFAULT", axis=axis, is_max=is_max)
+
+    return _callback
+
+
+def _make_face_set_cb(gz: Any, group: Any, axis: int, is_max: bool):
+    """Closure that applies a one-sided face resize by writing the
+    empty's ``location`` + ``scale``.
+
+    The modal calls this with ``value = init + delta`` where ``delta``
+    is the cursor's projection onto the face's OUTWARD world normal.
+    Both reads come from ``gz._drag_snapshot`` so every frame is
+    relative to drag start, never compounding.
+    """
+    del is_max  # snapshot's world_axis carries the direction
+
+    def setter(value: float) -> None:
+        empty = group._empty
+        if empty is None:
+            return
+        snap = getattr(gz, "_drag_snapshot", None)
+        if snap is None or snap.get("empty_name") != getattr(empty, "name", None):
+            return
+
+        new_scale_axis, new_location = face_quad.compute_face_resize(
+            value=value,
+            init_world_half=snap["world_half"],
+            init_location=snap["location"],
+            world_axis=snap["world_axis"],
+            display_size=snap["display_size"],
+        )
+        new_scale = list(snap["scale"])
+        # Preserve the sign of the original scale so a user-flipped empty
+        # stays flipped after the resize — compute_face_resize returns a
+        # positive magnitude, the sign is the user's intent to keep.
+        sign = -1.0 if snap["scale"][axis] < 0.0 else 1.0
+        new_scale[axis] = sign * new_scale_axis
+
+        empty.scale = new_scale
+        empty.location = Vector(new_location)
+
+    return setter
+
+
+class OBJECT_GGT_bim_clip_box(bpy.types.GizmoGroup):  # noqa: N801 — Blender bl_idname convention
+    """Face-quad resize handles on the active clip box.
+
+    Renders six near-invisible click-target quads and six colored edge
+    outlines on the active clip-box empty whenever clipping is enabled.
+    Click-and-drag a face to resize one-sided; the opposite face stays
+    put. CTRL+click and plain click fall through to selection.
+    """
+
+    bl_idname = "OBJECT_GGT_bim_clip_box"
+    bl_label = "Bonsai Clip Box Faces"
+    bl_space_type = "VIEW_3D"
+    bl_region_type = "WINDOW"
+    bl_options = {"3D", "PERSISTENT", "SHOW_MODAL_ALL"}
+
+    @classmethod
+    def poll(cls, context: Any) -> bool:
+        scene = getattr(context, "scene", None)
+        if scene is None:
+            return False
+        scene_props = tool.ClipBox.get_scene_props(scene)
+        if not scene_props.enabled or not scene_props.enable_gizmos:
+            return False
+        active_clip_box = tool.ClipBox.get_active_clip_box(scene)
+        if active_clip_box is None:
+            return False
+        # Only render when the user has the active clip box itself
+        # selected — otherwise the face handles would intercept clicks
+        # meant for the geometry behind them.
+        return getattr(context, "active_object", None) is active_clip_box
+
+    @classmethod
+    def setup_keymap(cls, keyconfig):
+        # Bind CLICK_DRAG so plain LEFTMOUSE PRESS passes through to
+        # selection — the user can still click through a near-invisible
+        # face quad to pick a mesh behind it.
+        km = keyconfig.keymaps.new(
+            name=cls.bl_idname,
+            space_type=cls.bl_space_type,
+            region_type=cls.bl_region_type,
+        )
+        km.keymap_items.new("gizmogroup.gizmo_tweak", type="LEFTMOUSE", value="CLICK_DRAG")
+        km.keymap_items.new("gizmogroup.gizmo_tweak", type="LEFTMOUSE", value="PRESS", ctrl=True)
+        return km
+
+    def setup(self, context: Any) -> None:
+        # ``_empty`` is resolved each refresh so the PERSISTENT group
+        # follows whichever clip box is active in the scene PG.
+        self._empty: bpy.types.Object | None = None
+        self._locked = False
+        self._face_routes: list[tuple[int, bool]] = []
+
+        for axis, is_max in face_quad.FACE_ROUTES:
+            gz = self.gizmos.new(face_quad.BIM_GT_box_face_quad.bl_idname)
+            gz._group = self
+            gz._face_axis = axis
+            gz.is_max = is_max
+            gz._drag_snapshot = None
+            gz._last_geometry_state = "solid"
+            gz._strips_cache_key = None
+            gz.color = face_quad.AXIS_COLOR[axis]
+            gz.color_highlight = tuple(min(1.0, c + 0.3) for c in face_quad.AXIS_COLOR[axis])
+            gz.alpha = face_quad.FACE_QUAD_ALPHA
+            gz.alpha_highlight = face_quad.FACE_QUAD_ALPHA_HIGHLIGHT
+            gz.use_draw_modal = True
+            gz.scale_basis = 1.0
+            gz.select_bias = face_quad.FACE_QUAD_SELECT_BIAS
+            gz.move_get_cb = _make_face_get_cb(gz, self, axis, is_max)
+            gz.move_set_cb = _make_face_set_cb(gz, self, axis, is_max)
+            # CTRL+click on a face aligns the viewport to look at it.
+            gz.ctrl_click_cb = _make_ctrl_click_cb(axis, is_max)
+            self._face_routes.append((axis, is_max))
+
+        # Outlines added last so they composite on top of the quad
+        # fills (Blender draws gizmos in creation order).
+        for axis, is_max in face_quad.FACE_ROUTES:
+            ol = self.gizmos.new(face_quad.BIM_GT_box_face_outline.bl_idname)
+            ol._face_axis = axis
+            ol.is_max = is_max
+            ol.color = face_quad.AXIS_COLOR[axis]
+            ol.color_highlight = face_quad.AXIS_COLOR[axis]
+            ol.alpha = 0.0
+            ol.alpha_highlight = 0.0
+            ol.line_width = 2.5
+
+    def _quad_gizmos(self):
+        return self.gizmos[: len(self._face_routes)]
+
+    def _outline_gizmos(self):
+        n = len(self._face_routes)
+        return self.gizmos[n : 2 * n]
+
+    def refresh(self, context: Any) -> None:
+        """State-change path: resolve the active empty, then run the
+        shared face-quad layout so the quads aren't stale for a frame
+        after a selection or active-index change."""
+        empty = tool.ClipBox.get_active_clip_box(context.scene)
+        self._empty = empty
+        if empty is None:
+            for gz in self.gizmos:
+                gz.hide = True
+            return
+        self._layout(context, empty)
+
+    def draw_prepare(self, context: Any) -> None:
+        """Per-redraw — fires on orbit — re-run the layout so the
+        front/back split, halo strips, and outline highlights track
+        the camera and any live G/R/S on the empty."""
+        empty = self._empty
+        if empty is None:
+            return
+        self._layout(context, empty)
+
+    def _layout(self, context: Any, empty: bpy.types.Object) -> None:
+        face_quad.apply_face_quad_layout(
+            quad_gizmos=self._quad_gizmos(),
+            outline_gizmos=self._outline_gizmos(),
+            bmin=_LOCAL_BMIN,
+            bmax=_LOCAL_BMAX,
+            matrix_world=empty.matrix_world,
+            # The empty's rotation rides in matrix_world, so the
+            # box-local OBB rotation is identity.
+            cage_rotation=Matrix.Identity(4),
+            region=getattr(context, "region", None),
+            rv3d=getattr(context, "region_data", None),
+            locked=self._locked,
+        )
+
+    # ---- mutual exclusion (lock siblings during a drag) ------------------
+
+    def _lock_for(self, active_gizmo) -> None:
+        self._locked = True
+        for gz in self.gizmos:
+            if gz is not active_gizmo:
+                with contextlib.suppress(ReferenceError, RuntimeError):
+                    gz.hide = True
+
+    def _unlock_all(self) -> None:
+        self._locked = False
+        for gz in self.gizmos:
+            with contextlib.suppress(ReferenceError, RuntimeError):
+                gz.hide = False
+        # Rebuild caps synchronously so the cross-section overlay
+        # re-forms the instant the user releases the handle, rather
+        # than waiting for the depsgraph's debounced rebuild path.
+        with contextlib.suppress(RuntimeError, ReferenceError):
+            tool.ClipBox.rebuild_caps_now()
+        # Push an undo step so the user can revert a face drag with Ctrl+Z.
+        with contextlib.suppress(RuntimeError):
+            bpy.ops.ed.undo_push(message="Resize Clip Box")

src/bonsai/bonsai/bim/module/clip_box/operator.py

@@ -0,0 +1,294 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+import bpy
+from mathutils import Matrix, Vector
+
+import bonsai.tool as tool
+from bonsai.bim.helper import prop_with_search
+
+from . import data
+
+# NOTE: do NOT add ``from __future__ import annotations`` to this module.
+# PEP 563 stringifies the operator's EnumProperty class annotations, which
+# breaks any introspection that reads ``cls.__annotations__[name].keywords``
+# — including the enum-search helper that draws the search-button icon.
+
+CLIP_BOX_NAME = "ClipBox"
+
+# Display labels for the source-based picker, used for the menu entries and
+# the dialog title. The dict keys are the canonical source-kind identifiers.
+SOURCE_KIND_LABELS: dict[str, str] = {
+    "SPATIAL": "Spatial Element",
+    "CLASS": "Class",
+    "TYPE": "Type",
+    "MATERIAL": "Material",
+    "PROFILE": "Profile",
+    "DRAWING": "Drawing",
+    "STATUS": "Status",
+    "SYSTEM": "System",
+    "GROUP": "Group",
+    "ZONE": "Zone",
+}
+
+
+_SOURCE_ID_DISPATCH = {
+    "SPATIAL": data.spatial_items,
+    "CLASS": data.class_items,
+    "TYPE": data.type_items,
+    "MATERIAL": data.material_items,
+    "PROFILE": data.profile_items,
+    "DRAWING": data.drawing_items,
+    "STATUS": data.status_items,
+    "SYSTEM": data.system_items,
+    "GROUP": data.group_items,
+    "ZONE": data.zone_items,
+}
+
+
+def _source_id_items(self, context):
+    """Dispatch the ``source_id`` enum items based on the picked ``source_kind``."""
+    fn = _SOURCE_ID_DISPATCH.get(self.source_kind)
+    if fn is None:
+        return [(data.NO_OPTIONS_ID, "No options", "")]
+    return fn(self, context)
+
+
+def _source_display_name(kind, source_id):
+    """Human-readable name of the picked source, used in the clip-box name."""
+    if kind == "STATUS":
+        return next((label for value, label in data.STATUS_LABELS if value == source_id), source_id)
+    if kind == "CLASS":
+        # source_id IS the human-readable IFC class name.
+        return source_id
+    ifc = tool.Ifc.get()
+    if ifc is None:
+        return source_id
+    try:
+        entity = ifc.by_id(int(source_id))
+    except (TypeError, ValueError, RuntimeError):
+        return source_id
+    return (getattr(entity, "Name", None) or "Unnamed").strip() or "Unnamed"
+
+
+class BIM_OT_align_view_to_clip_face(bpy.types.Operator):
+    bl_idname = "bim.align_view_to_clip_face"
+    bl_label = "Align View to Clip Box Face"
+    bl_description = "Orient the 3D viewport to look directly at the picked clip-box face"
+    bl_options = {"REGISTER"}
+
+    axis: bpy.props.IntProperty(default=0, options={"SKIP_SAVE"})
+    is_max: bpy.props.BoolProperty(default=True, options={"SKIP_SAVE"})
+
+    def execute(self, context):
+        rv3d = getattr(context, "region_data", None)
+        if rv3d is None:
+            return {"CANCELLED"}
+        clip_box = tool.ClipBox.get_active_clip_box(context.scene)
+        if clip_box is None:
+            return {"CANCELLED"}
+        rot_mat = clip_box.matrix_world.to_quaternion().to_matrix()
+        outward_local = Vector((0.0, 0.0, 0.0))
+        outward_local[self.axis] = 1.0 if self.is_max else -1.0
+        outward = (rot_mat @ outward_local).normalized()
+        if outward.length == 0.0:
+            return {"CANCELLED"}
+        up_world = (rot_mat @ _local_up_for_face(self.axis, self.is_max)).normalized()
+        rv3d.view_rotation = _view_rotation_from_forward_and_up(-outward, up_world)
+        return {"FINISHED"}
+
+
+def _local_up_for_face(axis: int, is_max: bool) -> Vector:
+    """Box-local up direction for a face, following Blender numpad conventions.
+
+    Side faces (local ±X / ±Y normal) → local +Z is up. Top face (local +Z
+    normal) → local +Y is up; bottom face (local -Z normal) → local -Y is
+    up. The caller rotates this through the empty's matrix so the
+    resulting world up axis tracks the box's orientation.
+    """
+    if axis == 2:
+        return Vector((0.0, 1.0, 0.0)) if is_max else Vector((0.0, -1.0, 0.0))
+    return Vector((0.0, 0.0, 1.0))
+
+
+def _view_rotation_from_forward_and_up(forward: Vector, up_hint: Vector) -> "bpy.types.Quaternion":
+    """Build a camera ``view_rotation`` that looks along ``forward`` with
+    ``up_hint`` projected to the camera's local +Y."""
+    back = -forward.normalized()
+    right = up_hint.cross(back)
+    if right.length < 1e-6:
+        right = Vector((1.0, 0.0, 0.0))
+    right.normalize()
+    up = back.cross(right).normalized()
+    return Matrix(
+        (
+            (right.x, up.x, back.x),
+            (right.y, up.y, back.y),
+            (right.z, up.z, back.z),
+        )
+    ).to_quaternion()
+
+
+class BIM_OT_add_clip_box(bpy.types.Operator):
+    bl_idname = "bim.add_clip_box"
+    bl_label = "Add Clip Box"
+    bl_description = (
+        "Create a clip box empty at the 3D cursor. The empty's location, rotation, and scale "
+        "drive the viewport clip planes; resize with S, move with G, rotate with R"
+    )
+    bl_options = {"REGISTER", "UNDO"}
+
+    def execute(self, context):
+        # Default to a 20m cube (scale 10 around [-1, +1] local cube) so
+        # the volume covers a typical building storey or two rather than
+        # the meaningless 2m unit cube. The user resizes with S.
+        matrix = Matrix.Translation(context.scene.cursor.location.copy()) @ Matrix.Diagonal((10.0, 10.0, 10.0, 1.0))
+        tool.ClipBox.create_clip_box_empty(context, matrix, name=CLIP_BOX_NAME)
+        return {"FINISHED"}
+
+
+class BIM_OT_add_clip_box_for_source(bpy.types.Operator):
+    bl_idname = "bim.add_clip_box_for_source"
+    bl_label = "Add Clip Box From Source"
+    bl_description = (
+        "Create a clip box sized to a chosen source: a spatial container, IFC type, material, "
+        "profile, drawing camera frustum, element status, system, group, or zone"
+    )
+    bl_options = {"REGISTER", "UNDO"}
+
+    source_kind: bpy.props.EnumProperty(
+        name="Source Kind",
+        items=[(kind, label, "") for kind, label in SOURCE_KIND_LABELS.items()],
+        default="SPATIAL",
+        options={"SKIP_SAVE"},
+    )
+    source_id: bpy.props.EnumProperty(
+        name="Source",
+        items=_source_id_items,
+        options={"SKIP_SAVE"},
+    )
+
+    def invoke(self, context, event):
+        return context.window_manager.invoke_props_dialog(self)
+
+    def draw(self, context):
+        layout = self.layout
+        label = f"Clip {SOURCE_KIND_LABELS.get(self.source_kind, 'Source')}"
+        # Search button appears once the enum exceeds the helper's threshold,
+        # giving the user a popup picker instead of a plain dropdown.
+        prop_with_search(layout, self, "source_id", text=label)
+
+    def execute(self, context):
+        if not self.source_id or self.source_id == data.NO_OPTIONS_ID:
+            self.report({"ERROR"}, "No source selected.")
+            return {"CANCELLED"}
+        matrix = tool.ClipBox.compute_matrix_for_source(self.source_kind, self.source_id)
+        if matrix is None:
+            kind_label = SOURCE_KIND_LABELS.get(self.source_kind, self.source_kind)
+            self.report(
+                {"ERROR"},
+                f"No elements found for {kind_label} '{_source_display_name(self.source_kind, self.source_id)}'.",
+            )
+            return {"CANCELLED"}
+        name = f"ClipBox.{SOURCE_KIND_LABELS.get(self.source_kind, self.source_kind)}.{_source_display_name(self.source_kind, self.source_id)}"
+        tool.ClipBox.create_clip_box_empty(context, matrix, name=name)
+        return {"FINISHED"}
+
+
+class BIM_OT_remove_clip_box(bpy.types.Operator):
+    bl_idname = "bim.remove_clip_box"
+    bl_label = "Remove Clip Box"
+    bl_description = "Remove this clip box and its host empty"
+    bl_options = {"REGISTER", "UNDO"}
+
+    index: bpy.props.IntProperty(default=-1, options={"SKIP_SAVE"})
+    delete_object: bpy.props.BoolProperty(default=True, name="Delete Host Object")
+
+    def execute(self, context):
+        scene_props = tool.ClipBox.get_scene_props(context.scene)
+        index = self.index if self.index >= 0 else scene_props.active_clip_box_index
+        if index < 0 or index >= len(scene_props.clip_boxes):
+            return {"CANCELLED"}
+
+        entry = scene_props.clip_boxes[index]
+        obj = entry.obj
+        scene_props.clip_boxes.remove(index)
+        if scene_props.active_clip_box_index >= len(scene_props.clip_boxes):
+            scene_props.active_clip_box_index = max(0, len(scene_props.clip_boxes) - 1)
+
+        if self.delete_object and obj is not None:
+            bpy.data.objects.remove(obj, do_unlink=True)
+
+        tool.ClipBox.refresh(context.scene)
+        tool.ClipBox.save_to_project_pset(context.scene)
+        return {"FINISHED"}
+
+
+class BIM_OT_set_active_clip_box(bpy.types.Operator):
+    bl_idname = "bim.set_active_clip_box"
+    bl_label = "Set Active Clip Box"
+    bl_description = "Set this clip box as the active one driving the viewport clip"
+    bl_options = {"REGISTER", "UNDO"}
+
+    index: bpy.props.IntProperty(default=-1, options={"SKIP_SAVE"})
+
+    def execute(self, context):
+        scene_props = tool.ClipBox.get_scene_props(context.scene)
+        if self.index < 0 or self.index >= len(scene_props.clip_boxes):
+            return {"CANCELLED"}
+        scene_props.active_clip_box_index = self.index
+        return {"FINISHED"}
+
+
+class BIM_OT_toggle_clip_box_enabled(bpy.types.Operator):
+    bl_idname = "bim.toggle_clip_box_enabled"
+    bl_label = "Toggle Clip Box"
+    bl_description = "Toggle whether the active clip box is driving the viewport clip planes"
+    bl_options = {"REGISTER", "UNDO"}
+
+    def execute(self, context):
+        scene_props = tool.ClipBox.get_scene_props(context.scene)
+        scene_props.enabled = not scene_props.enabled
+        return {"FINISHED"}
+
+
+class BIM_OT_duplicate_clip_box(bpy.types.Operator):
+    bl_idname = "bim.duplicate_clip_box"
+    bl_label = "Duplicate Clip Box"
+    bl_description = "Duplicate this clip box: copy its empty + matrix into a new entry"
+    bl_options = {"REGISTER", "UNDO"}
+
+    index: bpy.props.IntProperty(default=-1, options={"SKIP_SAVE"})
+
+    def execute(self, context):
+        scene_props = tool.ClipBox.get_scene_props(context.scene)
+        source_index = self.index if self.index >= 0 else scene_props.active_clip_box_index
+        if source_index < 0 or source_index >= len(scene_props.clip_boxes):
+            return {"CANCELLED"}
+        source = scene_props.clip_boxes[source_index].obj
+        if source is None:
+            return {"CANCELLED"}
+
+        copy = tool.ClipBox.create_clip_box_empty(context, source.matrix_world.copy(), name=source.name)
+        # Preserve the source's display attrs so the duplicate matches.
+        copy.empty_display_type = source.empty_display_type
+        copy.empty_display_size = source.empty_display_size
+        copy.show_in_front = source.show_in_front
+        return {"FINISHED"}

src/bonsai/bonsai/bim/module/clip_box/prop.py

@@ -0,0 +1,165 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+from __future__ import annotations
+
+from typing import TYPE_CHECKING
+
+import bpy
+from bpy.types import PropertyGroup
+
+import bonsai.tool as tool
+from bonsai.bim.prop import ObjProperty
+
+
+class BIMClipBoxProperties(PropertyGroup):
+    """Per-object marker for a clip-box host empty.
+
+    The host empty's ``matrix_world`` is the single source of truth for
+    the clip box's pose and dimensions: translation = box centre,
+    rotation = box orientation, per-axis scale = world half-extents. The
+    visible cube comes from the empty's CUBE display.
+
+    Only ``is_clip_box`` lives here; visibility (``enabled``) and overlay
+    (``show_caps``) are global per-file and live on the Scene PG.
+    """
+
+    is_clip_box: bpy.props.BoolProperty(
+        default=False,
+        description="True when this empty was created as a clip-box host. Internal flag; not user-edited.",
+    )
+
+    if TYPE_CHECKING:
+        is_clip_box: bool
+
+
+def update_active_clip_box_index(self, context):
+    tool.ClipBox.schedule_refresh()
+    tool.ClipBox.select_active_clip_box(context)
+    # Rebuild caps for the new active box's clip volume.
+    tool.ClipBox.invalidate_cap_cache(immediate=True)
+
+
+def update_show_caps(self, context):
+    tool.ClipBox.schedule_refresh()
+    # Off → on must trigger a rebuild so caps reappear immediately rather
+    # than wait for the next depsgraph tick. The rebuild is a no-op when
+    # show_caps is now False (it clears and returns), so this is safe in
+    # both directions.
+    tool.ClipBox.invalidate_cap_cache()
+
+
+def update_enabled(self, context):
+    tool.ClipBox.schedule_refresh()
+
+
+def update_clip_only_ifc_products(self, context):
+    # The eligibility set for capping changed — drop the cache and let the
+    # debounced rebuild pick up the new objects on the next idle tick.
+    tool.ClipBox.invalidate_cap_cache()
+
+
+def update_include_linked_ifc(self, context):
+    tool.ClipBox.invalidate_cap_cache()
+
+
+class BIMSceneClipBoxProperties(PropertyGroup):
+    """Scene-level registry of clip boxes in this file.
+
+    Multiple boxes may exist; ``active_clip_box_index`` selects which one
+    drives the viewport clip at any time. ``enabled`` and ``show_caps``
+    are global because the user's intent ("hide everything outside the
+    box", "draw cap overlays") applies file-wide, not per box.
+
+    ``enabled`` is intentionally not persisted to the project pset:
+    opening a fresh IFC should never silently hide geometry behind a
+    remembered toggle. Selecting any clip-box empty in the viewport
+    re-arms it (see :meth:`tool.ClipBox._sync_active_to_selection`).
+    """
+
+    clip_boxes: bpy.props.CollectionProperty(type=ObjProperty)
+    active_clip_box_index: bpy.props.IntProperty(
+        default=0,
+        min=0,
+        update=update_active_clip_box_index,
+        description="Index of the clip box currently driving the viewport clip planes",
+    )
+    enabled: bpy.props.BoolProperty(
+        name="Enabled",
+        default=False,
+        update=update_enabled,
+        description="When enabled, the active clip box hides all viewport geometry outside its 6 faces",
+    )
+    show_caps: bpy.props.BoolProperty(
+        name="Show Caps",
+        default=True,
+        update=update_show_caps,
+        description=(
+            "Draw filled cross-section caps where IFC product geometry "
+            "crosses the active clip planes. Disable for performance on "
+            "very heavy scenes"
+        ),
+    )
+    # Stored on the Scene PG so Blender persists it in the .blend; deliberately
+    # NOT written to the project pset so the IFC stays portable across users
+    # who may have different Blender-side reference geometry to clip.
+    clip_only_ifc_products: bpy.props.BoolProperty(
+        name="Only IFC Products",
+        default=True,
+        update=update_clip_only_ifc_products,
+        description=(
+            "When enabled, only IFC element geometry gets cross-section caps. "
+            "Disable to also cap Blender-side reference meshes (sketches, "
+            "imported obj, primitive cubes, …)"
+        ),
+    )
+    # Opt-in inclusion of geometry sitting inside loaded Project › Links
+    # collection-instance empties. Off by default — linked IFCs commonly
+    # carry the entire site / structural / MEP context, and bisecting
+    # them on every clip-box edit can be expensive.
+    include_linked_ifc: bpy.props.BoolProperty(
+        name="Include Linked IFC",
+        default=False,
+        update=update_include_linked_ifc,
+        description=(
+            "Also generate cross-section caps for geometry inside linked "
+            "IFC files (Project ▸ Links). Off by default — linked IFCs may "
+            "carry the entire site / structural backbone, and capping them "
+            "adds per-mesh bisect cost on every clip-box edit"
+        ),
+    )
+    # Also Scene-only — gizmo visibility is a per-user editing preference,
+    # not a portable IFC property.
+    enable_gizmos: bpy.props.BoolProperty(
+        name="Show Face Handles",
+        default=True,
+        description=(
+            "Show interactive face-resize handles on the active clip box. "
+            "Disable to fall back to plain G/R/S transforms on the empty"
+        ),
+    )
+
+    if TYPE_CHECKING:
+        active_clip_box_index: int
+        enabled: bool
+        show_caps: bool
+        clip_only_ifc_products: bool
+        include_linked_ifc: bool
+        enable_gizmos: bool

src/bonsai/bonsai/bim/module/clip_box/ui.py

@@ -0,0 +1,145 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026 Dion Moult <dion@thinkmoult.com>
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+from __future__ import annotations
+
+from bpy.types import Menu, Panel, UIList
+
+import bonsai.tool as tool
+
+# Per-kind icon for the source-picker menu. Picked from Blender's built-in
+# icon set; semantically close to the kind so users can scan the menu visually.
+_SOURCE_MENU_ENTRIES: tuple[tuple[str, str, str], ...] = (
+    ("SPATIAL", "Clip Spatial Element", "OUTLINER_COLLECTION"),
+    ("CLASS", "Clip by Class", "BLANK1"),
+    ("TYPE", "Clip Type", "FILE_3D"),
+    ("MATERIAL", "Clip Material", "MATERIAL"),
+    ("PROFILE", "Clip Profile", "MESH_CIRCLE"),
+    ("DRAWING", "Clip Drawing Extents", "CAMERA_DATA"),
+    ("STATUS", "Clip by Status", "INFO"),
+    ("SYSTEM", "Clip by System", "MOD_FLUID"),
+    ("GROUP", "Clip by Group", "OUTLINER_OB_GROUP_INSTANCE"),
+    ("ZONE", "Clip by Zone", "MOD_LATTICE"),
+)
+
+
+class BIM_MT_clip_box_add_for_source(Menu):
+    bl_idname = "BIM_MT_clip_box_add_for_source"
+    bl_label = "Add Clip Box From Source"
+
+    def draw(self, context):
+        layout = self.layout
+        for kind, label, icon in _SOURCE_MENU_ENTRIES:
+            op = layout.operator("bim.add_clip_box_for_source", text=label, icon=icon)
+            op.source_kind = kind
+
+
+class BIM_MT_clip_box_settings(Menu):
+    bl_idname = "BIM_MT_clip_box_settings"
+    bl_label = "Clip Box Settings"
+
+    def draw(self, context):
+        scene_props = tool.ClipBox.get_scene_props(context.scene)
+        self.layout.prop(scene_props, "clip_only_ifc_products")
+        self.layout.prop(scene_props, "include_linked_ifc")
+        self.layout.prop(scene_props, "enable_gizmos")
+
+
+class BIM_MT_clip_box_info(Menu):
+    bl_idname = "BIM_MT_clip_box_info"
+    bl_label = "Clip Box Face Handles"
+
+    def draw(self, context):
+        layout = self.layout
+        layout.label(text="Face Handles", icon="INFO")
+        layout.separator()
+        layout.label(text="Drag a face to resize the clip box on that axis.")
+        layout.label(text="The opposite face stays fixed (one-sided resize).")
+        layout.label(text="Ctrl+Click a face to align the viewport to it.")
+        layout.separator()
+        layout.label(text="Toggle handles from the Settings (gear) menu.")
+
+
+class BIM_UL_clip_box(UIList):
+    def draw_item(self, context, layout, data, item, icon, active_data, active_propname, index, flt_flag):
+        obj = item.obj
+        row = layout.row(align=True)
+        if obj is None:
+            # Host empty was deleted from outliner; still expose the
+            # remove button so the orphan entry isn't permanent.
+            row.label(text="(missing)", icon="ERROR")
+            row.operator("bim.remove_clip_box", text="", icon="X", emboss=False).index = index
+            return
+        row.prop(obj, "name", text="", emboss=False, icon="MESH_CUBE")
+        row.operator("bim.duplicate_clip_box", text="", icon="DUPLICATE", emboss=False).index = index
+        row.operator("bim.remove_clip_box", text="", icon="X", emboss=False).index = index
+
+
+class BIM_PT_clip_box(Panel):
+    bl_idname = "BIM_PT_clip_box"
+    bl_label = "Clip Box"
+    bl_space_type = "PROPERTIES"
+    bl_region_type = "WINDOW"
+    bl_context = "scene"
+    bl_options = {"DEFAULT_CLOSED"}
+    bl_parent_id = "BIM_PT_tab_sandbox"
+
+    def draw(self, context):
+        layout = self.layout
+        scene_props = tool.ClipBox.get_scene_props(context.scene)
+
+        toggles = layout.row(align=True)
+        toggles.scale_y = 2.0
+        toggles.prop(
+            scene_props,
+            "enabled",
+            text="Enable Clipping",
+            icon="HIDE_OFF" if scene_props.enabled else "HIDE_ON",
+            toggle=True,
+        )
+        toggles.prop(scene_props, "show_caps", text="Show Caps", icon="MOD_SOLIDIFY", toggle=True)
+        toggles.menu("BIM_MT_clip_box_settings", icon="PREFERENCES", text="")
+        toggles.menu("BIM_MT_clip_box_info", icon="INFO", text="")
+
+        layout.separator()
+        row = layout.row(align=True)
+        row.operator("bim.add_clip_box", icon="ADD", text="Add Clip Box")
+        row.menu("BIM_MT_clip_box_add_for_source", icon="DOWNARROW_HLT", text="")
+
+        layout.template_list(
+            "BIM_UL_clip_box",
+            "",
+            scene_props,
+            "clip_boxes",
+            scene_props,
+            "active_clip_box_index",
+            rows=3,
+        )
+
+        obj = tool.ClipBox.get_active_clip_box(context.scene)
+        if obj is None:
+            layout.label(text="No active clip box", icon="INFO")
+            return
+
+        col = layout.column(align=True)
+        col.label(text="Edit the empty with G / R / S to move / rotate / resize")
+        col.prop(obj, "location")
+        col.prop(obj, "rotation_euler")
+        col.prop(obj, "scale")

src/bonsai/bonsai/bim/module/drawing/__init__.py

@@ -141,6 +141,7 @@ classes = (
     gizmos.GizmoLockOpen,
     gizmos.GizmoLockClosed,
     gizmos.GizmoArc,
+    gizmos.GizmoLinkToggle,
     gizmos.GizmoFillet,
     gizmos.GizmoWallCornerIcon,
     gizmos.GizmoWallTeeIcon,
@@ -153,6 +154,7 @@ classes = (
     gizmos.GizmoArrayParent,
     gizmos.GizmoArrayAll,
     gizmos.GizmoArrayLayerIndicator,
+    gizmos.GizmoCountLabel,
     gizmos.GizmoMerge,
     gizmos.GizmoSplit,
     gizmos.GizmoUnjoin,

src/bonsai/bonsai/bim/module/drawing/handler.py

@@ -50,6 +50,9 @@ def set_active_camera_resolution(scene: bpy.types.Scene) -> None:
     if camera.type != props.camera_type:
         camera.type = props.camera_type
 
+    if props.update_props and (drawing := tool.Ifc.get_entity(camera_obj)):
+        tool.Drawing.sync_perspective_camera_shifts(drawing, camera)
+
     ortho_scale, aspect_ratio = props.get_scale_and_aspect_ratio()
     scene_render = scene.render
     if (camera.ortho_scale != ortho_scale) or not tool.Cad.is_x(

src/bonsai/bonsai/bim/module/drawing/operator.py

@@ -57,7 +57,7 @@ import shapely
 from bpy_extras.image_utils import load_image
 from bpy_extras.io_utils import ImportHelper
 from lxml import etree
-from mathutils import Color, Vector
+from mathutils import Color, Matrix, Vector
 
 import bonsai.bim.export_ifc
 import bonsai.bim.handler
@@ -602,6 +602,7 @@ class CreateDrawing(bpy.types.Operator):
         context_type: Literal["body", "annotation"],
         drawing_elements: set[ifcopenshell.entity_instance],
         target_view: str,
+        link_matrix: Optional[Matrix] = None,
     ) -> None:
         drawing_elements = drawing_elements.copy()
         contexts_: list[list[int]] = getattr(contexts, context_type)
@@ -613,9 +614,19 @@ class CreateDrawing(bpy.types.Operator):
                 geom_settings.set("dimensionality", ifcopenshell.ifcopenshell_wrapper.CURVES_SURFACES_AND_SOLIDS)
                 geom_settings.set("iterator-output", ifcopenshell.ifcopenshell_wrapper.NATIVE)
 
-                if ifc.by_id(context[0]).ContextType == "Plan" and "PLAN_VIEW" in target_view:
+                is_plan = ifc.by_id(context[0]).ContextType == "Plan" and "PLAN_VIEW" in target_view
+                z_offset = (0.002 if target_view == "PLAN_VIEW" else -0.002) if is_plan else 0.0
+
+                if link_matrix is not None:
+                    unit_scale = ifcopenshell.util.unit.calculate_unit_scale(ifc)
+                    t = link_matrix.to_translation()
+                    offset = (t.x / unit_scale, t.y / unit_scale, t.z / unit_scale + z_offset)
+                    geom_settings.set("model-offset", offset)
+                    q = link_matrix.to_quaternion()
+                    geom_settings.set("model-rotation", (q.x, q.y, q.z, q.w))
+                elif z_offset:
                     # A 2mm Z offset to combat Z-fighting in plan or RCPs
-                    geom_settings.set("model-offset", (0.0, 0.0, 0.002 if target_view == "PLAN_VIEW" else -0.002))
+                    geom_settings.set("model-offset", (0.0, 0.0, z_offset))
 
                 geom_settings.set("context-ids", context)
                 it = ifcopenshell.geom.iterator(
@@ -923,11 +934,16 @@ class CreateDrawing(bpy.types.Operator):
 
         bim_props = tool.Blender.get_bim_props()
         prefs = tool.Blender.get_addon_preferences()
-        files = {bim_props.ifc_file: tool.Ifc.get()}
+        # Map ifc_path → (ifc_file, link_matrix); main file has no link_matrix (None)
+        files: dict[str, tuple[ifcopenshell.file, Optional[Matrix]]] = {bim_props.ifc_file: (tool.Ifc.get(), None)}
 
         props = tool.Project.get_project_props()
         for link in props.get_loaded_links_for_drawings():
-            files[link.filepath] = self.get_linked_file(link)
+            try:
+                link_matrix = tool.Project.calculate_link_matrix(link)
+            except Exception:
+                link_matrix = None
+            files[link.filepath] = (self.get_linked_file(link), link_matrix)
 
         target_view = ifcopenshell.util.element.get_psets(self.camera_element)["EPset_Drawing"]["TargetView"]
         self.setup_serialiser(target_view)
@@ -935,7 +951,13 @@ class CreateDrawing(bpy.types.Operator):
         tree = ifcopenshell.geom.tree()
         tree.enable_face_styles(True)
 
-        for ifc_path, ifc in files.items():
+        # Accumulated across every file in the loop below (main model plus any
+        # linked models) so the SHAPELY fill pass after the loop covers all of
+        # them, not just whichever file happened to be processed last.
+        raycast_objs = set()
+        elements_with_faces = set()
+
+        for ifc_path, (ifc, link_matrix) in files.items():
             # Don't use draw.main() just whilst we're prototyping and experimenting
             # TODO: hash paths are never used
             ifc_hash = hashlib.md5(ifc_path.encode("utf-8")).hexdigest()
@@ -944,13 +966,24 @@ class CreateDrawing(bpy.types.Operator):
             self.serialiser.setFile(ifc)
             drawing_elements = tool.Drawing.get_drawing_elements(self.camera_element, ifc_file=ifc)
 
+            if self.cprops.fill_mode == "SHAPELY":
+                for element in drawing_elements.copy():
+                    if element.is_a("IfcAnnotation"):
+                        continue
+                    obj = tool.Ifc.get_object(element)
+                    if obj and obj.type == "MESH" and len(obj.data.polygons):
+                        elements_with_faces.add(element.GlobalId)
+                        raycast_objs.add(obj)
+
             # Get all representation contexts to see what we're dealing with.
             # Drawings only draw bodies and annotations (and facetation, due to a Revit bug).
             # A drawing prioritises a target view context first, followed by a model view context as a fallback.
             # Specifically for PLAN_VIEW and REFLECTED_PLAN_VIEW, any Plan context is also prioritised.
             contexts = self.get_linework_contexts(ifc, target_view)
-            self.serialize_contexts_elements(ifc, tree, contexts, "body", drawing_elements, target_view)
-            self.serialize_contexts_elements(ifc, tree, contexts, "annotation", drawing_elements, target_view)
+            self.serialize_contexts_elements(ifc, tree, contexts, "body", drawing_elements, target_view, link_matrix)
+            self.serialize_contexts_elements(
+                ifc, tree, contexts, "annotation", drawing_elements, target_view, link_matrix
+            )
 
             if tool.Ifc.get() == ifc and self.camera_element not in drawing_elements:
                 with profile("Camera element"):
@@ -1017,16 +1050,6 @@ class CreateDrawing(bpy.types.Operator):
             # shapely variant
             group = root.find("{http://www.w3.org/2000/svg}g")
 
-            raycast_objs = set()
-            elements_with_faces = set()
-            for element in drawing_elements.copy():
-                if element.is_a("IfcAnnotation"):
-                    continue
-                obj = tool.Ifc.get_object(element)
-                if obj and obj.type == "MESH" and len(obj.data.polygons):
-                    elements_with_faces.add(element.GlobalId)
-                    raycast_objs.add(obj)
-
             projections = root.xpath(
                 ".//svg:g[contains(@class, 'projection')]", namespaces={"svg": "http://www.w3.org/2000/svg"}
             )
@@ -2319,7 +2342,10 @@ class ActivateDrawingBase(tool.Ifc.Operator):
     bl_description = (
         "Activates the selected drawing view.\n\n"
         + "ALT+CLICK to keep the viewport position.\n\n"
-        + "SHIFT+CLICK to load a quick preview of the drawing view"
+        + "SHIFT+CLICK to load a quick preview of the drawing view.\n\n"
+        + "SHIFT+CTRL+CLICK to load the annotations of all selected drawings without switching views, "
+        + "then select their cameras (the first selected drawing's camera becomes active).\n\n"
+        + "SHIFT+CTRL+ALT+CLICK to do the same but also select the annotations, not just the cameras"
     )
 
     drawing: bpy.props.IntProperty()
@@ -2335,13 +2361,32 @@ class ActivateDrawingBase(tool.Ifc.Operator):
         default=False,
         options={"SKIP_SAVE"},
     )
+    load_selected_annotations: bpy.props.BoolProperty(
+        name="Load Selected Annotations",
+        description="Load the annotations of all selected drawings without switching the active view.",
+        default=False,
+        options={"SKIP_SAVE"},
+    )
+    include_annotations_in_selection: bpy.props.BoolProperty(
+        name="Include Annotations In Selection",
+        description="Also select the loaded annotation objects, not just the drawing cameras.",
+        default=False,
+        options={"SKIP_SAVE"},
+    )
 
     if TYPE_CHECKING:
         drawing: int
         should_view_from_camera: bool
         use_quick_preview: bool
+        load_selected_annotations: bool
+        include_annotations_in_selection: bool
 
     def invoke(self, context, event) -> set["rna_enums.OperatorReturnItems"]:
+        if event.type == "LEFTMOUSE" and event.shift and event.ctrl:
+            self.load_selected_annotations = True
+            if event.alt:
+                self.include_annotations_in_selection = True
+            return self.execute(context)
         if event.type == "LEFTMOUSE" and event.alt:
             self.should_view_from_camera = False
         if event.type == "LEFTMOUSE" and event.shift:
@@ -2354,6 +2399,37 @@ class ActivateDrawingBase(tool.Ifc.Operator):
         if props.is_editing_drawings == False:
             bpy.ops.bim.load_drawings()
 
+        if self.load_selected_annotations:
+            objs_to_select = []
+            active_camera = None
+            for d in props.drawings:
+                if not (d.is_drawing and d.is_selected):
+                    continue
+                selected_drawing = tool.Ifc.get().by_id(d.ifc_definition_id)
+                # Importing the camera (if missing) ensures the drawing's
+                # collection exists so the annotations get collected into it.
+                if not (camera := tool.Ifc.get_object(selected_drawing)):
+                    camera = tool.Drawing.import_drawing(selected_drawing)
+                group = tool.Drawing.get_drawing_group(selected_drawing)
+                tool.Drawing.import_annotations_in_group(group)
+
+                if active_camera is None:
+                    active_camera = camera
+                objs_to_select.append(camera)
+                if self.include_annotations_in_selection:
+                    for element in tool.Drawing.get_group_elements(group) or []:
+                        if element.is_a("IfcAnnotation") and element.ObjectType != "DRAWING":
+                            if annotation_obj := tool.Ifc.get_object(element):
+                                objs_to_select.append(annotation_obj)
+
+            # Select the checked drawings' objects, with the first drawing's camera as active.
+            bpy.ops.object.select_all(action="DESELECT")
+            for obj in objs_to_select:
+                obj.select_set(True)
+            if active_camera is not None:
+                context.view_layer.objects.active = active_camera
+            return {"FINISHED"}
+
         drawing = tool.Ifc.get().by_id(self.drawing)
         dprops = tool.Drawing.get_document_props()
 
@@ -2439,7 +2515,10 @@ class ActivateDrawing(bpy.types.Operator, ActivateDrawingBase):
     bl_description = (
         "Activates the selected drawing view.\n\n"
         + "ALT+CLICK to keep the viewport position.\n\n"
-        + "SHIFT+CLICK to load a quick preview of the drawing view"
+        + "SHIFT+CLICK to load a quick preview of the drawing view.\n\n"
+        + "SHIFT+CTRL+CLICK to load the annotations of all selected drawings without switching views, "
+        + "then select their cameras (the first selected drawing's camera becomes active).\n\n"
+        + "SHIFT+CTRL+ALT+CLICK to do the same but also select the annotations, not just the cameras"
     )
 
 

src/bonsai/bonsai/bim/module/drawing/prop.py

@@ -604,6 +604,7 @@ class BIMCameraProperties(PropertyGroup):
         return tool.Blender.get_active_uilist_element(dprops.drawing_styles, self.active_drawing_style_index)
 
     # For now, this JSON dump are all the parameters that determine a camera's "Block representation"
+    # Perspective camera shift is stored in EPset_Drawing and intentionally excluded here.
     # By checking this, you will know whether or not the camera IFC representation needs to be refreshed
     def update_representation(self, matrix_world: Matrix) -> bool:
         """Update ``representation`` based on current camera properties and the provided world matrix.

src/bonsai/bonsai/bim/module/drawing/ui.py

@@ -99,6 +99,10 @@ class BIM_PT_camera(Panel):
         if props.target_view == "MODEL_VIEW":
             row = self.layout.row()
             row.prop(props, "camera_type")
+            if props.camera_type == "PERSP":
+                row = self.layout.row(align=True)
+                row.prop(camera_data, "shift_x", text="Camera Shift X/Y:")
+                row.prop(camera_data, "shift_y", text="")
 
         row = self.layout.row()
         row.prop(props, "linework_mode")

src/bonsai/bonsai/bim/module/geometry/data.py

@@ -80,9 +80,9 @@ class ViewportData:
                 modes.append(edit_mode)
             elif element.is_a("IfcGridAxis"):
                 modes.append(edit_mode)
-            elif tool.Blender.Modifier.is_roof(element):
+            elif tool.Parametric.is_roof(element):
                 modes.append(edit_mode)
-            elif tool.Blender.Modifier.is_railing(element):
+            elif tool.Parametric.is_railing(element):
                 modes.append(edit_mode)
             elif item_mode not in modes:
                 modes.append(item_mode)

src/bonsai/bonsai/bim/module/geometry/decorator.py

@@ -16,8 +16,6 @@
 # You should have received a copy of the GNU General Public License
 # along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
 
-from collections.abc import Sequence
-
 import blf
 import bpy
 import gpu
@@ -25,15 +23,16 @@ import ifcopenshell
 import numpy as np
 from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
-from gpu_extras.batch import batch_for_shader
 from mathutils import Matrix, Vector
 
 import bonsai.tool as tool
 
 
-class ItemDecorator:
-    is_installed = False
-    handlers = []
+class ItemDecorator(tool.Blender.ViewportDecorator):
+    draw_methods = (
+        ("draw_text", "POST_PIXEL"),
+        ("draw", "POST_VIEW"),
+    )
     objs: dict[str, dict[str, list]]
     obj_is_selected: dict[str, bool]
     obj_is_boolean: dict[str, list[ifcopenshell.entity_instance]]
@@ -119,23 +118,6 @@ class ItemDecorator:
             "special_edges": special_edges,
         }
 
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
-
-    def draw_batch(self, shader_type, content_pos, color, indices=None):
-        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
-            return
-        shader = self.line_shader if shader_type == "LINES" else self.shader
-        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
-        shader.uniform_float("color", color)
-        batch.draw(shader)
-
     def draw_text(self, context):
         self.addon_prefs = tool.Blender.get_addon_preferences()
         selected_elements_color = self.addon_prefs.decorator_color_selected
@@ -163,11 +145,6 @@ class ItemDecorator:
         blf.disable(font_id, blf.SHADOW)
 
     def draw(self, context: bpy.types.Context) -> None:
-        def transparent_color(color: Sequence[float], alpha: float = 0.05) -> list[float]:
-            color = [i for i in color]
-            color[3] = alpha
-            return color
-
         self.addon_prefs = tool.Blender.get_addon_preferences()
         selected_elements_color = self.addon_prefs.decorator_color_selected
         unselected_elements_color = self.addon_prefs.decorator_color_unselected
@@ -197,15 +174,33 @@ class ItemDecorator:
                     if context.mode != "OBJECT":
                         continue
                     self.draw_batch("LINES", data["verts"], selected_elements_color, data["edges"])
-                    self.draw_batch("TRIS", data["verts"], transparent_color(selected_elements_color), data["tris"])
+                    self.draw_batch(
+                        "TRIS",
+                        data["verts"],
+                        tool.Blender.transparent_color(selected_elements_color, alpha=0.05),
+                        data["tris"],
+                    )
                     self.draw_batch("LINES", data["special_verts"], selected_elements_color, data["special_edges"])
                 elif self.obj_is_boolean[obj_name]:
                     self.draw_batch("LINES", data["verts"], special_elements_color, data["edges"])
-                    self.draw_batch("TRIS", data["verts"], transparent_color(special_elements_color), data["tris"])
+                    self.draw_batch(
+                        "TRIS",
+                        data["verts"],
+                        tool.Blender.transparent_color(special_elements_color, alpha=0.05),
+                        data["tris"],
+                    )
                     self.draw_batch("LINES", data["special_verts"], special_elements_color, data["special_edges"])
                 else:
                     self.draw_batch(
-                        "LINES", data["verts"], transparent_color(unselected_elements_color, alpha=0.2), data["edges"]
+                        "LINES",
+                        data["verts"],
+                        tool.Blender.transparent_color(unselected_elements_color, alpha=0.2),
+                        data["edges"],
+                    )
+                    self.draw_batch(
+                        "TRIS",
+                        data["verts"],
+                        tool.Blender.transparent_color(special_elements_color, alpha=0.05),
+                        data["tris"],
                     )
-                    self.draw_batch("TRIS", data["verts"], transparent_color(special_elements_color), data["tris"])
                     self.draw_batch("LINES", data["special_verts"], special_elements_color, data["special_edges"])

src/bonsai/bonsai/bim/module/geometry/operator.py

@@ -546,6 +546,13 @@ class UpdateRepresentation(bpy.types.Operator, tool.Ifc.Operator):
         objs = [bpy.data.objects[obj_name]] if obj_name else context.selected_objects
         self.file = tool.Ifc.get()
 
+        # Tessellated face sets (IfcTriangulatedFaceSet/IfcPolygonalFaceSet) were
+        # introduced in IFC4 and do not exist in IFC2X3. Catch this early so we
+        # don't silently fall back to a faceted brep after stripping materials.
+        if self.ifc_representation_class == "IfcTessellatedFaceSet" and self.file.schema == "IFC2X3":
+            self.report({"ERROR"}, "Tessellated face sets are not supported in IFC2X3.")
+            return {"CANCELLED"}
+
         for obj in objs:
             # TODO: write unit tests to see how this bulk operation handles
             # contradictory ifc_representation_class values and when
@@ -883,6 +890,16 @@ class OverrideDelete(bpy.types.Operator):
         # Track aggregates before deleting their parts
         aggregates_to_check = self.track_aggregates(objects_to_remove)
 
+        # Snapshot the set of IFC entity ids being deleted in this batch so the
+        # connection-rel cascade inside `delete_ifc_object` can suppress
+        # partner-side regenerate when the partner is also about to vanish.
+        batch_being_deleted_ids: set[int] = set()
+        for obj in objects_to_remove:
+            if not tool.Blender.is_valid_data_block(obj):
+                continue
+            if (entity := tool.Ifc.get_entity(obj)) is not None:
+                batch_being_deleted_ids.add(entity.id())
+
         clear_active_object = True
 
         for i, obj in enumerate(objects_to_remove, 1):
@@ -924,7 +941,7 @@ class OverrideDelete(bpy.types.Operator):
                 if tool.Drawing.is_auto_annotation(element):
                     self.report({"INFO"}, "References cannot be deleted. Exclude the referenced element instead.")
                     continue
-                tool.Geometry.delete_ifc_object(obj)
+                tool.Geometry.delete_ifc_object(obj, batch_being_deleted_ids=batch_being_deleted_ids)
             elif tool.Geometry.is_representation_item(obj):
                 tool.Geometry.delete_ifc_item(obj)
             else:
@@ -1023,14 +1040,17 @@ class OverrideDelete(bpy.types.Operator):
             pset = ifcopenshell.util.element.get_pset(element, "BBIM_Array")
             if not pset:
                 continue
-            array_parents.add(ifc_file.by_guid(pset["Parent"]))
+            try:
+                array_parents.add(ifc_file.by_guid(pset["Parent"]))
+            except RuntimeError:
+                continue
 
         for array_parent in array_parents:
             array_parent_obj = tool.Ifc.get_object(array_parent)
-            data = [(i, data) for i, data in enumerate(tool.Blender.Modifier.Array.get_modifiers_data(array_parent))]
+            data = [(i, data) for i, data in enumerate(tool.Array.get_modifiers_data(array_parent))]
             # NOTE: there is a way to remove arrays more precisely but it's more complex
             for i, modifier_data in reversed(data):
-                children = set(tool.Blender.Modifier.Array.get_children_objects(modifier_data))
+                children = set(tool.Array.get_children_objects(modifier_data))
                 if children.issubset(selected_objects):
                     with context.temp_override(active_object=array_parent_obj):
                         bpy.ops.bim.remove_array(item=i)
@@ -1289,9 +1309,7 @@ class OverrideDuplicateMove(bpy.types.Operator):
                                 all_objects_to_select.add(part_obj)
 
         # Non-IFC duplicates aren't tracked in old_to_new but are left selected by duplicate_ifc_objects
-        all_objects_to_select.update(
-            obj for obj in context.selected_objects if not tool.Ifc.get_entity(obj)
-        )
+        all_objects_to_select.update(obj for obj in context.selected_objects if not tool.Ifc.get_entity(obj))
 
         # Deselect everything first
         bpy.ops.object.select_all(action="DESELECT")
@@ -2497,9 +2515,9 @@ class OverrideModeSetObject(bpy.types.Operator, tool.Ifc.Operator):
                     profile = tool.Ifc.get().by_id(profile_id)
                     if tool.Ifc.get_object(profile):  # We are editing an arbitrary profile
                         bpy.ops.bim.edit_arbitrary_profile()
-                elif tool.Blender.Modifier.is_railing(element):
+                elif tool.Parametric.is_railing(element):
                     bpy.ops.bim.finish_editing_railing_path()
-                elif tool.Blender.Modifier.is_roof(element):
+                elif tool.Parametric.is_roof(element):
                     bpy.ops.bim.finish_editing_roof_path()
                 elif tool.Model.get_usage_type(element) == "PROFILE":
                     bpy.ops.bim.edit_extrusion_axis()
@@ -3168,7 +3186,7 @@ class EnableEditingRepresentationItems(bpy.types.Operator, tool.Ifc.Operator):
                 product_reps = element.RepresentationMaps
             item_aspect = {}
             for product_rep in product_reps:
-                for aspect in product_rep.HasShapeAspects:
+                for aspect in getattr(product_rep, "HasShapeAspects", ()):
                     for aspect_rep in aspect.ShapeRepresentations:
                         if aspect_rep.ContextOfItems != representation.ContextOfItems:
                             continue

src/bonsai/bonsai/bim/module/geometry/ui.py

@@ -17,9 +17,9 @@
 # along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
 
 import bpy
+import ifcopenshell.util.unit
 from bpy.types import Menu, Panel, UIList
 
-import ifcopenshell.util.unit
 import bonsai.bim
 import bonsai.tool as tool
 from bonsai.bim.helper import prop_with_search

src/bonsai/bonsai/bim/module/georeference/decorator.py

@@ -21,7 +21,6 @@ from math import radians
 import blf
 import gpu
 import ifcopenshell.util.geolocation
-from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
 from gpu_extras.batch import batch_for_shader
 from mathutils import Matrix, Vector
@@ -30,27 +29,11 @@ import bonsai.tool as tool
 from bonsai.bim.module.georeference.data import GeoreferenceData
 
 
-class GeoreferenceDecorator:
-    is_installed = False
-    handlers = []
-
-    @classmethod
-    def install(cls, context):
-        if cls.is_installed:
-            cls.uninstall()
-        handler = cls()
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_text, (context,), "WINDOW", "POST_PIXEL"))
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_geometry, (context,), "WINDOW", "POST_VIEW"))
-        cls.is_installed = True
-
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
+class GeoreferenceDecorator(tool.Blender.ViewportDecorator):
+    draw_methods = (
+        ("draw_text", "POST_PIXEL"),
+        ("draw_geometry", "POST_VIEW"),
+    )
 
     def draw_batch(self, shader_type, content_pos, color, indices=None, should_scale=True):
         if not tool.Blender.validate_shader_batch_data(content_pos, indices):
@@ -197,6 +180,10 @@ class GeoreferenceDecorator:
         decorator_color_error = self.addon_prefs.decorator_color_error
 
         gpu.state.blend_set("ALPHA")
+        # The georef gizmo is a coordinate-system overlay: it must communicate
+        # orientation regardless of model contents, so depth testing is bypassed.
+        original_depth_test = gpu.state.depth_test_get()
+        gpu.state.depth_test_set("ALWAYS")
 
         self.line_shader = gpu.shader.from_builtin("POLYLINE_UNIFORM_COLOR")
         self.line_shader.bind()  # required to be able to change uniforms of the shader
@@ -335,6 +322,8 @@ class GeoreferenceDecorator:
                 self.draw_batch("LINES", verts, decorator_color_special, edges)
                 self.draw_dashed_line(location * 3, location * 6, decorator_color_error)
 
+        gpu.state.depth_test_set(original_depth_test)
+
     def draw_dashed_line(self, start, end, colour, should_scale=True):
         direction = (end - start).normalized()
         distance = (end - start).length

src/bonsai/bonsai/bim/module/light/decorator.py

@@ -20,44 +20,18 @@
 import blf
 import bpy
 import gpu
-from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
-from gpu_extras.batch import batch_for_shader
 from mathutils import Matrix, Vector
 
 import bonsai.tool as tool
 from bonsai.bim.module.light.data import SolarData
 
 
-class SolarDecorator:
-    is_installed = False
-    handlers = []
-
-    @classmethod
-    def install(cls, context):
-        if cls.is_installed:
-            cls.uninstall()
-        handler = cls()
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_text, (context,), "WINDOW", "POST_PIXEL"))
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_geometry, (context,), "WINDOW", "POST_VIEW"))
-        cls.is_installed = True
-
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
-
-    def draw_batch(self, shader_type, content_pos, color, indices=None):
-        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
-            return
-        shader = self.line_shader if shader_type == "LINES" else self.shader
-        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
-        shader.uniform_float("color", color)
-        batch.draw(shader)
+class SolarDecorator(tool.Blender.ViewportDecorator):
+    draw_methods = (
+        ("draw_text", "POST_PIXEL"),
+        ("draw_geometry", "POST_VIEW"),
+    )
 
     def draw_text(self, context: bpy.types.Context) -> None:
         self.addon_prefs = tool.Blender.get_addon_preferences()

src/bonsai/bonsai/bim/module/model/__init__.py

@@ -27,11 +27,14 @@ import bonsai.tool as tool
 from . import (
     array,
     covering,
+    decorator,
     door,
     external,
     grid,
     handler,
+    host_add_opening_gizmo,
     mep,
+    mep_bend_preview,
     opening,
     product,
     profile,
@@ -50,19 +53,28 @@ from . import (
 
 classes = (
     array.AddArray,
-    array.DisableEditingArray,
-    array.EditArray,
+    array.CancelEditingArray,
     array.EnableEditingArray,
+    array.FinishEditingArray,
     array.ApplyArray,
     array.RegenerateArray,
     array.RemoveArray,
     array.SelectAllArrayObjects,
     array.SelectArrayParent,
+    array.ArrayParentGizmoClick,
+    array.EditArrayFromChild,
     array.Input3DCursorXArray,
     array.Input3DCursorYArray,
     array.Input3DCursorZArray,
     array.EnableEditingParametric,
     array.AddArrayFromFeatureEdit,
+    array.ArrayGizmoClick,
+    array.ToggleArrayMethod,
+    array.RemoveArrayLayerFromEdit,
+    array.InputArrayCount,
+    array.AdjustArrayCount,
+    array.GizmoArrayEdition,
+    array.GizmoArrayChild,
     product.AddDefaultType,
     product.AddEmptyType,
     product.AddOccurrence,
@@ -74,6 +86,7 @@ classes = (
     product.SetActiveType,
     workspace.Hotkey,
     workspace.BIM_MT_add_representation_item,
+    wall.AddPerpendicularWall,
     wall.AddWallsFromSlab,
     wall.AlignWall,
     wall.CancelEditingWall,
@@ -91,12 +104,18 @@ classes = (
     wall.ExtendWallToCursor,
     wall.FinishEditingWall,
     wall.FlipWall,
-    wall.GizmoWallAddOpening,
+    host_add_opening_gizmo.GizmoHostAddOpening,
+    host_add_opening_gizmo.GizmoHostToggleOpenings,
     wall.GizmoWallEdition,
     wall.GizmoWallExtendVertically,
     wall.GizmoWallFilletPreview,
     wall.GizmoWallFilletReedit,
+    wall.GizmoWallFilletToggleOpenings,
+    wall.GizmoPairDisconnect,
+    wall.GizmoSlabEdition,
+    wall.GizmoSlabUnjoinWalls,
     wall.GizmoWallJoinIntersection,
+    wall.GizmoWallLinkToggle,
     wall.GizmoWallUnjoinSingle,
     wall.JoinWallsIntersection,
     wall.MergeWall,
@@ -105,8 +124,7 @@ classes = (
     wall.RotateWall90,
     wall.SplitWall,
     wall.SplitWallAtCursor,
-    wall.ToggleWallOpenings,
-    wall.UnjoinWallPathConnection,
+    wall.DisconnectElements,
     wall.UnjoinWalls,
     wall.EnableWallFilletPreview,
     wall.FinishWallFilletPreview,
@@ -124,6 +142,7 @@ classes = (
     opening.RemoveBoolean,
     opening.SelectBoolean,
     opening.ShowOpenings,
+    opening.ToggleHostOpenings,
     opening.UpdateOpeningsFocus,
     profile.ChangeCardinalPoint,
     profile.ChangeProfileDepth,
@@ -139,11 +158,14 @@ classes = (
     slab.DisableEditingExtrusionProfile,
     slab.DisableEditingSketchExtrusionProfile,
     slab.AddSlabFromWall,
+    slab.CancelEditingSlab,
     slab.DrawPolylineSlab,
     slab.EditExtrusionProfile,
     slab.EditSketchExtrusionProfile,
     slab.EnableEditingExtrusionProfile,
     slab.EnableEditingSketchExtrusionProfile,
+    slab.EnableEditingSlab,
+    slab.FinishEditingSlab,
     slab.RecalculateSlab,
     slab.ResetVertex,
     slab.SetArcIndex,
@@ -170,11 +192,16 @@ classes = (
     prop.BIMDoorProperties,
     prop.BIMRailingProperties,
     prop.BIMRoofProperties,
+    prop.BIMSlabProperties,
     prop.BIMWallProperties,
+    prop.BIMPipeSegmentProperties,
+    prop.BIMDuctSegmentProperties,
     prop.BIMPolylineProperties,
     prop.BIMExternalParametricGeometryProperties,
+    prop.BIMBendPreviewProperties,
     prop.BIMWallFilletPreviewProperties,
     prop.BIMPreviewProperties,
+    prop.BIMParametricEditDialogPrefs,
     ui.BIM_PT_array,
     ui.BIM_PT_stair,
     ui.BIM_PT_wall,
@@ -198,7 +225,8 @@ classes = (
     stair.ToggleStairProperty,
     stair.AdjustStairTreads,
     stair.SetStairTreads,
-    stair.CycleStairType,
+    stair.InputStairTreads,
+    stair.PickStairType,
     stair.GizmoStairEdition,
     sverchok_modifier.CreateNewSverchokGraph,
     sverchok_modifier.UpdateDataFromSverchok,
@@ -211,7 +239,7 @@ classes = (
     window.FinishEditingWindow,
     window.EnableEditingWindow,
     window.RemoveWindow,
-    window.CycleWindowType,
+    window.PickWindowType,
     window.GizmoWindowEdition,
     door.BIM_OT_add_door,
     door.AddDoor,
@@ -220,15 +248,19 @@ classes = (
     door.EnableEditingDoor,
     door.RemoveDoor,
     door.ToggleDoorSwing,
-    door.CycleDoorType,
+    door.PickDoorType,
     door.GizmoDoorEdition,
     railing.BIM_OT_add_railing,
     railing.CopyRailingParameters,
     railing.AddRailing,
     railing.CancelEditingRailing,
+    railing.CycleRailingType,
     railing.FinishEditingRailing,
+    railing.PickRailingTerminalType,
     railing.FlipRailingPathOrder,
     railing.EnableEditingRailing,
+    railing.GizmoRailingSchematic,
+    railing.ToggleRailingUseManualSupports,
     railing.CancelEditingRailingPath,
     railing.FinishEditingRailingPath,
     railing.EnableEditingRailingPath,
@@ -237,16 +269,39 @@ classes = (
     roof.AddRoof,
     roof.CancelEditingRoof,
     roof.CopyRoofParameters,
+    roof.CycleRoofGenerationMethod,
     roof.FinishEditingRoof,
     roof.EnableEditingRoof,
     roof.CancelEditingRoofPath,
     roof.FinishEditingRoofPath,
     roof.EnableEditingRoofPath,
+    roof.GizmoRoofEdition,
     roof.RemoveRoof,
     roof.SetGableRoofEdgeAngle,
     mep.MEPAddObstruction,
     mep.MEPAddTransition,
     mep.MEPAddBend,
+    mep.MEPRemoveTerminalFitting,
+    mep.SelectMEPPathMembers,
+    mep.MEPJoinSegments,
+    mep_bend_preview.EnableBendPreview,
+    mep_bend_preview.FinishBendPreview,
+    mep_bend_preview.CancelBendPreview,
+    mep_bend_preview.EnableBendPreviewFromBend,
+    mep_bend_preview.GizmoBendPreview,
+    mep.EnableEditingPipeSegment,
+    mep.FinishEditingPipeSegment,
+    mep.CancelEditingPipeSegment,
+    mep.EnableEditingDuctSegment,
+    mep.FinishEditingDuctSegment,
+    mep.CancelEditingDuctSegment,
+    mep.ExtendPipeSegmentToCursor,
+    mep.ExtendDuctSegmentToCursor,
+    mep.SplitPipeSegmentAtCursor,
+    mep.SplitDuctSegmentAtCursor,
+    mep.GizmoPipeSegmentEdition,
+    mep.GizmoDuctSegmentEdition,
+    mep.GizmoMEPActions,
     external.ApplyExternalParametricGeometry,
 )
 
@@ -306,6 +361,9 @@ def register():
         type=prop.BIMExternalParametricGeometryProperties
     )
     bpy.types.Scene.BIMPreviewProperties = bpy.props.PointerProperty(type=prop.BIMPreviewProperties)
+    bpy.types.WindowManager.BIMParametricEditDialogPrefs = bpy.props.PointerProperty(
+        type=prop.BIMParametricEditDialogPrefs
+    )
 
     bpy.types.VIEW3D_MT_add.prepend(ui.add_menu)
     bpy.app.handlers.load_post.append(handler.load_post)
@@ -320,6 +378,11 @@ def unregister():
     # half-unloaded module state.
     opening.DecorationsHandler.uninstall()
 
+    # Network path overlays attach SpaceView3D draw handlers on toggle;
+    # uninstall here so addon disable / Blender shutdown doesn't leak them.
+    decorator.MEPSystemPathDecorator.uninstall()
+    decorator.WallSystemPathDecorator.uninstall()
+
     if not bpy.app.background:
         for tool_data in reversed(tools):
             bpy.utils.unregister_tool(tool_data.tool)
@@ -331,6 +394,7 @@ def unregister():
     tool.Parametric.unregister_object_properties()
     del bpy.types.Object.BIMExternalParametricGeometryProperties
     del bpy.types.Scene.BIMPreviewProperties
+    del bpy.types.WindowManager.BIMParametricEditDialogPrefs
 
     bpy.app.handlers.load_post.remove(handler.load_post)
     bpy.types.VIEW3D_MT_add.remove(ui.add_menu)

src/bonsai/bonsai/bim/module/model/data.py

@@ -51,6 +51,10 @@ class AuthoringData:
 
     @classmethod
     def load(cls, ifc_element_type: Optional[str] = None):
+        # ``is_loaded`` is set first as a recursion guard: one of the data
+        # computations evaluates a PropertyGroup enum's ``items`` callback,
+        # which re-enters this method. Without the guard, load recurses to
+        # RecursionError.
         cls.is_loaded = True
         cls.props = tool.Model.get_model_props()
         cls.data["default_container"] = cls.default_container()

src/bonsai/bonsai/bim/module/model/door.py

@@ -37,8 +37,9 @@ import bonsai.core.root
 import bonsai.tool as tool
 from bonsai.bim.module.drawing import gizmos as gizmo
 from bonsai.bim.module.drawing.gizmos import DimensionGizmoConfig
+from bonsai.bim.module.model.wall_offset_gizmos import WALL_OFFSET_GIZMO_CONFIGS
 from bonsai.bim.module.model.window import create_bm_box, create_bm_window
-from bonsai.bim.parametric_lifecycle import FeatureModifierEditMixin
+from bonsai.bim.parametric_lifecycle import FeatureModifierEditMixin, PickTypeMixin
 
 if TYPE_CHECKING:
     from bonsai.bim.module.model.prop import BIMDoorProperties
@@ -580,7 +581,7 @@ class _DoorEditMixin(FeatureModifierEditMixin):
 
     @classmethod
     def _is_element_type(cls, element):
-        return tool.Blender.Modifier.is_door(element)
+        return tool.Parametric.is_door(element)
 
     @classmethod
     def _get_props(cls, obj: bpy.types.Object):
@@ -629,7 +630,7 @@ class RemoveDoor(bpy.types.Operator, tool.Ifc.Operator):
     def remove_door_on_object(self, obj: bpy.types.Object) -> None:
         element = tool.Ifc.get_entity(obj)
         assert element
-        if not tool.Blender.Modifier.is_door(element):
+        if not tool.Parametric.is_door(element):
             return
         props = tool.Model.get_door_props(obj)
         props.is_editing = False
@@ -644,12 +645,8 @@ class RemoveDoor(bpy.types.Operator, tool.Ifc.Operator):
 
 
 class ToggleDoorSwing(bpy.types.Operator, tool.Ifc.Operator):
-    """Toggle door swing direction and optionally flip door geometry.
-
-    Shift+Click (when flip_geometry=True): Flip geometry only without changing door direction"""
-
     bl_idname = "bim.toggle_door_swing"
-    bl_label = "Toggle Door Swing"
+    bl_label = "Change Door Swing"
     bl_options = {"REGISTER", "UNDO"}
 
     flip_geometry: bpy.props.BoolProperty(name="Flip Geometry", default=False)
@@ -660,6 +657,15 @@ class ToggleDoorSwing(bpy.types.Operator, tool.Ifc.Operator):
         name="Skip Direction Change", default=False, options={"HIDDEN", "SKIP_SAVE"}
     )
 
+    @classmethod
+    def description(cls, context: bpy.types.Context, properties: bpy.types.OperatorProperties) -> str:
+        if properties.flip_geometry:
+            return (
+                "Swing the door from the opposite side of the wall. "
+                "Shift+click: mirror the door without changing which side it opens to"
+            )
+        return "Move the door hinge to the opposite side"
+
     def invoke(self, context: bpy.types.Context, event: bpy.types.Event) -> set[str]:
         self.skip_direction_change = event.shift
         return self.execute(context)
@@ -686,7 +692,7 @@ class ToggleDoorSwing(bpy.types.Operator, tool.Ifc.Operator):
         if not element:
             return {"CANCELLED"}
 
-        is_door = tool.Blender.Modifier.is_door(element)
+        is_door = tool.Parametric.is_door(element)
 
         if self.flip_geometry:
             tool.Geometry.flip_object(obj, self.flip_local_axes)
@@ -700,11 +706,11 @@ class ToggleDoorSwing(bpy.types.Operator, tool.Ifc.Operator):
         return {"FINISHED"}
 
 
-class CycleDoorType(bpy.types.Operator, tool.Ifc.Operator, gizmo.CycleTypeMixin):
-    """Cycle through available door types. Shift+click to cycle in reverse."""
+class PickDoorType(bpy.types.Operator, tool.Ifc.Operator, PickTypeMixin):
+    """Pick a door type from a popup menu."""
 
-    bl_idname = "bim.cycle_door_type"
-    bl_label = "Cycle Door Type"
+    bl_idname = "bim.pick_door_type"
+    bl_label = "Pick Door Type"
     bl_options = {"REGISTER", "UNDO"}
 
     element_checker = tool.Parametric.is_door
@@ -713,7 +719,7 @@ class CycleDoorType(bpy.types.Operator, tool.Ifc.Operator, gizmo.CycleTypeMixin)
     type_attr = "door_type"
 
     def _execute(self, context: bpy.types.Context) -> set[str]:
-        return self._cycle_type(context)
+        return self._pick_type(context)
 
 
 class GizmoDoorEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
@@ -726,7 +732,7 @@ class GizmoDoorEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
     enable_editing_operator = "bim.enable_editing_door"
     finish_editing_operator = "bim.finish_editing_door"
     cancel_editing_operator = "bim.cancel_editing_door"
-    cycle_type_operator = "bim.cycle_door_type"
+    pick_type_operator = "bim.pick_door_type"
 
     # Declarative dimension gizmo configuration with visibility and position
     # matrix_position lambdas replace the get_dimension_matrix_* methods
@@ -833,6 +839,36 @@ class GizmoDoorEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
                 p.get_transom_window_center_z(),
             ),
         ),
+        *WALL_OFFSET_GIZMO_CONFIGS,
+    ]
+
+    # Big quarter-arc hit shapes cover much of the door face — without a
+    # negative select_bias they would steal clicks from the small dimension
+    # and edit gizmos drawn on top of them.
+    SWING_ARC_SELECT_BIAS = -1000.0
+    swing_arc_operator = "bim.toggle_door_swing"
+
+    swing_arc_props = [
+        gizmo.SwingArcConfig(
+            name="primary",
+            visibility_condition=lambda p: p.is_editing and "SLIDING" not in p.door_type,
+            hinge_x=lambda p: (
+                p.overall_width if p.door_type.endswith("RIGHT") and "DOUBLE_DOOR" not in p.door_type else 0.0
+            ),
+            hinge_y=lambda p: p.lining_offset,
+            panel_width=lambda p: p.overall_width / 2 if "DOUBLE_DOOR" in p.door_type else p.overall_width,
+            x_mirror=lambda p: p.door_type.endswith("RIGHT") and "DOUBLE_DOOR" not in p.door_type,
+        ),
+        gizmo.SwingArcConfig(
+            name="secondary",
+            visibility_condition=lambda p: p.is_editing
+            and "DOUBLE_DOOR" in p.door_type
+            and "SLIDING" not in p.door_type,
+            hinge_x=lambda p: p.overall_width,
+            hinge_y=lambda p: p.lining_offset,
+            panel_width=lambda p: p.overall_width / 2,
+            x_mirror=lambda _p: True,
+        ),
     ]
 
     props_getter = tool.Model.get_door_props
@@ -840,7 +876,7 @@ class GizmoDoorEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
 
     @classmethod
     def is_element_type(cls, element: ifcopenshell.entity_instance) -> bool:
-        return tool.Blender.Modifier.is_door(element)
+        return tool.Parametric.is_door(element)
 
     def get_icon_y_extent(self, props: "BIMDoorProperties") -> tuple[float, float]:
         """Get Y extents for door icon positioning.
@@ -858,22 +894,20 @@ class GizmoDoorEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
         return (furthest_y, furthest_y)
 
     def setup_element_specific_gizmos(self, context: bpy.types.Context) -> None:
-        """Create door-specific swing arc gizmos."""
-        prefs = tool.Blender.get_addon_preferences()
-        inactive_color = prefs.decorator_color_background[:3]
-        special_color = prefs.decorator_color_special[:3]
+        """Create one (main, flip) swing-arc pair per ``swing_arc_props`` entry.
 
-        self.gizmo_door_type = self.create_arc_gizmo(
-            special_color,
-            "bim.toggle_door_swing",
-            flip_geometry=False,
-        )
-        self.gizmo_flip_arc = self.create_arc_gizmo(
-            inactive_color,
-            "bim.toggle_door_swing",
-            flip_geometry=True,
-            flip_local_axes="XY",
-        )
+        Stored as ``self.gizmo_swing_arc_<name>`` and ``self.gizmo_swing_arc_<name>_flip``
+        and pinned to ``SWING_ARC_SELECT_BIAS`` so other door gizmos win selection."""
+        prefs = tool.Blender.get_addon_preferences()
+        main_color = prefs.decorator_color_special[:3]
+        flip_color = prefs.decorator_color_background[:3]
+        for cfg in self.swing_arc_props:
+            main = self.create_arc_gizmo(main_color, self.swing_arc_operator, flip_geometry=False)
+            flip = self.create_arc_gizmo(flip_color, self.swing_arc_operator, flip_geometry=True)
+            for gz in (main, flip):
+                gz.select_bias = self.SWING_ARC_SELECT_BIAS
+            setattr(self, f"gizmo_swing_arc_{cfg.name}", main)
+            setattr(self, f"gizmo_swing_arc_{cfg.name}_flip", flip)
 
     def _refresh_element_specific(
         self, context: bpy.types.Context, mw: Matrix, props: "BIMDoorProperties"  # noqa: ARG002
@@ -892,29 +926,23 @@ class GizmoDoorEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
         self._update_view_dependent_dimensions(context, mw, props)
 
     def update_swing_gizmos(self, mw: Matrix, props: "BIMDoorProperties") -> None:
-        """Update swing gizmo position and color based on editing state."""
-        prefs = self.get_addon_prefs()
-        door_gizmo_prefs = prefs.gizmos.door
-
-        door_type_visible = self.update_gizmo_visibility(
-            self.gizmo_door_type, props.is_editing, door_gizmo_prefs.swing_arc
-        )
-        flip_arc_visible = self.update_gizmo_visibility(
-            self.gizmo_flip_arc, props.is_editing, door_gizmo_prefs.flip_arc
-        )
-
-        if not door_type_visible and not flip_arc_visible:
-            return
-
-        swing_x_offset = props.overall_width if "RIGHT" in props.door_type else 0.0
-        base_swing_transform = Matrix.Translation(V_(swing_x_offset, props.lining_offset, 0)) @ Matrix.Scale(
-            props.overall_width, 4
-        )
-
-        if door_type_visible:
-            self.gizmo_door_type.matrix_basis = mw @ base_swing_transform
-            self.gizmo_door_type.color = prefs.decorations_colour[:3]
-
-        if flip_arc_visible:
-            mirror_y = Matrix.Scale(-1, 4, (0, 1, 0))
-            self.gizmo_flip_arc.matrix_basis = mw @ base_swing_transform @ mirror_y
+        """Position each declared swing-arc pair per its config + props state."""
+        mirror_y = Matrix.Scale(-1, 4, (0, 1, 0))
+        for cfg in self.swing_arc_props:
+            main = getattr(self, f"gizmo_swing_arc_{cfg.name}")
+            flip = getattr(self, f"gizmo_swing_arc_{cfg.name}_flip")
+            show = cfg.visibility_condition(props)
+            main_visible = self.update_gizmo_visibility(main, show)
+            flip_visible = self.update_gizmo_visibility(flip, show)
+            if not (main_visible or flip_visible):
+                continue
+            x_flip = Matrix.Scale(-1, 4, (1, 0, 0)) if cfg.x_mirror(props) else Matrix.Identity(4)
+            transform = (
+                Matrix.Translation(V_(cfg.hinge_x(props), cfg.hinge_y(props), 0))
+                @ Matrix.Scale(cfg.panel_width(props), 4)
+                @ x_flip
+            )
+            if main_visible:
+                main.matrix_basis = mw @ transform
+            if flip_visible:
+                flip.matrix_basis = mw @ transform @ mirror_y

src/bonsai/bonsai/bim/module/model/host_add_opening_gizmo.py

@@ -0,0 +1,247 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+"""Generic single-click "Add Opening" gizmo for hosts (walls, slabs, roofs).
+
+One GizmoGroup serves every IFC host type that exposes ``HasOpenings``:
+parametric LAYER2 walls, any ``IfcSlab``, and any ``IfcRoof``. The poll
+guards host-host pairings so this gizmo never overlaps with the existing
+wall-join / extend-vertically gizmos. The positioner dispatches on element
+type — walls use axis-projection + camera-facing-Y math (which requires the
+parametric layer-set); slabs and roofs use a world-Z face bias driven by
+the void object's elevation against the host's bounding box."""
+
+import bpy
+from mathutils import Vector
+
+import bonsai.tool as tool
+from bonsai.bim.module.drawing import gizmos as gizmo
+from bonsai.bim.module.model.opening import is_filling_supported
+from bonsai.bim.module.model.wall import (
+    _get_wall_geom_cached,
+    _wall_camera_facing_icon_y,
+    _wall_gizmo_poll_gate,
+    _WallGeomCachedBillboardingMixin,
+)
+
+
+def is_supported_host(element) -> bool:
+    """Total predicate (None → False). Walls accept either a parametric
+    LAYER2 wall OR a fillet-corner wall (both expose a usable axis +
+    layer-set for the anchor math); slabs and roofs only need the bound
+    box so any IfcSlab / IfcRoof qualifies regardless of parametric
+    modifier state."""
+    if element is None:
+        return False
+    return tool.Parametric.is_path_connectable_wall(element) or element.is_a("IfcSlab") or element.is_a("IfcRoof")
+
+
+def is_supported_filling_or_opening(element) -> bool:
+    """Total predicate for the add-opening gizmo poll. ``None`` (raw Blender
+    mesh) is accepted because the operator converts unclassified meshes
+    into ``IfcOpeningElement`` instances. ``IfcOpeningElement`` is accepted
+    because reassigning an existing opening to a new host is a legal path
+    through the operator. Otherwise defer to the generator's own
+    supported-filling predicate."""
+    if element is None:
+        return True
+    if element.is_a("IfcOpeningElement"):
+        return True
+    return is_filling_supported(element)
+
+
+def _resolve_active_host(context: bpy.types.Context, n_selected: int):
+    """Shared poll prologue: gizmo gate + selection cardinality + active-in-
+    selected + IFC entity lookup + supported-host predicate. Returns the
+    active element on success, ``None`` on any failure — callers chain their
+    feature-specific checks past the early-return."""
+    if not _wall_gizmo_poll_gate(context):
+        return None
+    selected = tool.Blender.get_selected_objects()
+    if len(selected) != n_selected:
+        return None
+    active = context.active_object
+    if active is None or active not in selected:
+        return None
+    element = tool.Ifc.get_entity(active)
+    if not element or not is_supported_host(element):
+        return None
+    return element
+
+
+class GizmoHostAddOpening(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMixin):
+    """Activates when exactly two objects are selected and one is a fillable
+    host (wall / slab / roof) while the other is a valid filling (door /
+    window / existing opening, or a plain Blender mesh).
+
+    Selection-order independent: the host role is identified by class, not
+    by active state. The "+" icon anchors on the host's surface regardless
+    of which object was clicked first. The dispatched ``bim.add_opening``
+    operator also handles either order.
+
+    Per-frame positioning keeps the icon facing the camera as the viewport
+    orbits."""
+
+    bl_idname = "OBJECT_GGT_bim_host_add_opening"
+    bl_label = "Host Add Opening Gizmo"
+    bl_space_type = "VIEW_3D"
+    bl_region_type = "WINDOW"
+    bl_options = {"3D", "PERSISTENT"}
+
+    @classmethod
+    def poll(cls, context: bpy.types.Context) -> bool:
+        if not _wall_gizmo_poll_gate(context):
+            return False
+        selected = list(tool.Blender.get_selected_objects())
+        if len(selected) != 2:
+            return False
+        active = context.active_object
+        if active is None or active not in selected:
+            return False
+        a_element = tool.Ifc.get_entity(selected[0])
+        b_element = tool.Ifc.get_entity(selected[1])
+        return cls._is_apply_opening_pair(a_element, b_element) or cls._is_apply_opening_pair(b_element, a_element)
+
+    @staticmethod
+    def _is_apply_opening_pair(host_element, filling_element) -> bool:
+        """``host_element`` qualifies as a fillable host AND ``filling_element``
+        qualifies as a filling. Used twice with the operands swapped so the
+        gizmo polls true regardless of which of the two selected objects is
+        active."""
+        if not is_supported_host(host_element):
+            return False
+        if not hasattr(host_element, "HasOpenings"):
+            return False
+        return is_supported_filling_or_opening(filling_element)
+
+    def setup(self, context: bpy.types.Context) -> None:
+        default_color, highlight_color = self.get_decoration_colors()
+        self.add_opening_icon = self.setup_icon_gizmo(
+            "VIEW3D_GT_add_opening", default_color, highlight_color, "bim.add_opening"
+        )
+
+    def position_gizmos(self, context: bpy.types.Context) -> None:
+        selected = list(tool.Blender.get_selected_objects())
+        if len(selected) != 2:
+            return
+        a, b = selected[0], selected[1]
+        a_element = tool.Ifc.get_entity(a)
+        b_element = tool.Ifc.get_entity(b)
+        if is_supported_host(a_element):
+            host_obj, host_element, other = a, a_element, b
+        elif is_supported_host(b_element):
+            host_obj, host_element, other = b, b_element, a
+        else:
+            return
+
+        if tool.Parametric.is_path_connectable_wall(host_element):
+            world_pos = wall_anchor(context, self, host_obj, other)
+        else:
+            world_pos = layer3_anchor(host_obj, other)
+        if world_pos is None:
+            return
+        self.add_opening_icon.matrix_basis = gizmo.billboarded_at(world_pos, gizmo.get_billboard_rotation(context))
+
+
+def wall_anchor(
+    context: bpy.types.Context, group: bpy.types.GizmoGroup, wall_obj: bpy.types.Object, other: bpy.types.Object
+) -> Vector | None:
+    """World-space anchor for the add-opening icon on a wall host: void origin
+    projected onto the wall reference-line X (clamped to wall extents), lifted to
+    the camera-facing wall-local Y."""
+    geom = _get_wall_geom_cached(group, wall_obj)
+    if not geom:
+        return None
+    mw = wall_obj.matrix_world
+    wall_local = mw.inverted() @ other.matrix_world.translation
+    local_x = max(geom["anchor_x"], min(wall_local.x, geom["anchor_x"] + geom["length"]))
+    icon_y = _wall_camera_facing_icon_y(context, mw, geom)
+    base_world = mw @ Vector((local_x, icon_y, 0.0))
+    top_world = mw @ Vector((local_x, icon_y, geom["height"] + gizmo.BaseParametricGizmoGroup.ICON_Z_OFFSET))
+    return gizmo.BaseParametricGizmoGroup.pick_visible_anchor(context, base_world, top_world)
+
+
+def layer3_anchor(host_obj: bpy.types.Object, other: bpy.types.Object) -> Vector:
+    """World-space anchor for the add-opening icon on a LAYER3 host (slab / roof):
+    void's world XY, lifted just above the host's top face. Predictable height
+    regardless of where the void sits vertically — clicking the icon places the
+    opening at the void's XY, and the operator handles the actual cut depth."""
+    bbox = tool.Blender.get_object_world_bounding_box(host_obj)
+    anchor_xy = other.matrix_world.translation.xy
+    top_z = bbox["max_z"] + gizmo.BaseParametricGizmoGroup.ICON_Z_OFFSET
+    return Vector((anchor_xy.x, anchor_xy.y, top_z))
+
+
+def host_toggle_anchor(host_obj: bpy.types.Object) -> Vector:
+    """Object origin XY, lifted just above the topmost mesh vertex. Tracks
+    the parametric origin (useful reference even when the mesh extends
+    asymmetrically) and the visible top face (stays clear of sloped or
+    stepped bodies)."""
+    origin = host_obj.matrix_world.translation
+    top_z = tool.Blender.get_object_world_bounding_box(host_obj)["max_z"] + gizmo.BaseParametricGizmoGroup.ICON_Z_OFFSET
+    return Vector((origin.x, origin.y, top_z))
+
+
+class GizmoHostToggleOpenings(bpy.types.GizmoGroup, _WallGeomCachedBillboardingMixin):
+    """Fallback toggle-openings icon for hosts that lack their own
+    parametric-edit toolbar — slabs today, plus any foreign-authored
+    IfcRoof that carries no BBIM_Roof pset (so ``GizmoRoofEdition`` doesn't
+    poll for it). Walls and parametric roofs already render an idle-row
+    toggle next to the pen and are excluded from this poll.
+
+    When slab parametric-edit lands the slab branch will pen-row-handle
+    its own toggle; updating the exclusion predicate here is the only
+    migration step needed."""
+
+    bl_idname = "OBJECT_GGT_bim_host_toggle_openings"
+    bl_label = "Host Toggle Openings Gizmo"
+    bl_space_type = "VIEW_3D"
+    bl_region_type = "WINDOW"
+    bl_options = {"3D", "PERSISTENT"}
+
+    @classmethod
+    def poll(cls, context: bpy.types.Context) -> bool:
+        element = _resolve_active_host(context, n_selected=1)
+        if element is None:
+            return False
+        if not tool.Geometry.has_openings(element):
+            return False
+        # Skip when a per-feature parametric-edit gizmo already surfaces
+        # an idle-row toggle for this element — walls and parametric roofs
+        # both render their own toggle in the pen row.
+        if tool.Parametric.is_path_connectable_wall(element):
+            return False
+        if tool.Parametric.is_roof(element):
+            return False
+        return True
+
+    def setup(self, context: bpy.types.Context) -> None:
+        default_color, highlight_color = self.get_decoration_colors()
+        self.toggle_openings_icon = self.setup_icon_gizmo(
+            "VIEW3D_GT_add_opening", default_color, highlight_color, "bim.toggle_host_openings"
+        )
+
+    def position_gizmos(self, context: bpy.types.Context) -> None:
+        host_obj = context.active_object
+        if not host_obj:
+            return
+        self.toggle_openings_icon.matrix_basis = gizmo.billboarded_at(
+            host_toggle_anchor(host_obj), gizmo.get_billboard_rotation(context)
+        )

src/bonsai/bonsai/bim/module/model/mep_bend_preview.py

@@ -0,0 +1,444 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+"""Bend-preview lifecycle for MEP segment joins.
+
+Holds the four lifecycle operators (Enable / Finish / Cancel /
+EnableFromBend) and the ``GizmoBendPreview`` group that surfaces the
+tunable dimensions and validate/cancel icons during preview. Draft state
+lives at ``Scene.BIMPreviewProperties.bend`` per CLAUDE.md §2.9 (Scene
+for cross-element previews).
+
+The geometry math (``compute_bend_preview_polylines``,
+``_bend_profile_cross_section``, ``_sweep_profile_along_polyline``)
+stays in ``mep.py`` because the commit operator ``MEPAddBend`` reuses
+it; this module imports the polyline helper for per-frame gizmo
+positioning. The GPU lines themselves are drawn by
+``decorator.BendPreviewDecorator``, kept in ``decorator.py`` with its
+sibling decorators."""
+
+from typing import ClassVar
+
+import bpy
+import ifcopenshell.util.element
+import ifcopenshell.util.unit
+from mathutils import Matrix, Vector
+
+import bonsai.tool as tool
+from bonsai.bim.module.drawing import gizmos as gizmo
+from bonsai.bim.module.model import preview_base
+from bonsai.bim.module.model.mep import (
+    _is_bend_fitting,
+    _n_mep_selected,
+    cached_compute_bend_preview_polylines,
+    segments_are_parallel,
+    validate_bend_preconditions,
+)
+
+
+class EnableBendPreview(bpy.types.Operator):
+    """Enter bend-preview mode for two selected MEP segments. Populates
+    scene.BIMPreviewProperties.bend with segment IFC ids and default
+    start_length / end_length / radius; no IFC mutation until finish."""
+
+    bl_idname = "bim.enable_bend_preview"
+    bl_label = "Enter Bend Preview"
+    bl_description = "Begin tuning bend parameters before committing the bend"
+    bl_options = {"REGISTER", "UNDO"}
+
+    @classmethod
+    def poll(cls, context):
+        if not _n_mep_selected(2):
+            cls.poll_message_set("Select exactly 2 MEP segments to bend.")
+            return False
+        return True
+
+    def execute(self, context):
+        selected = tool.Blender.get_selected_objects()
+        active = context.active_object
+        if active is None or active not in selected:
+            self.report({"ERROR"}, "Active object must be one of the selected MEP segments.")
+            return {"CANCELLED"}
+        other = next((o for o in selected if o is not active), None)
+        if other is None:
+            self.report({"ERROR"}, "Two MEP segments must be selected.")
+            return {"CANCELLED"}
+        active_element = tool.Ifc.get_entity(active)
+        other_element = tool.Ifc.get_entity(other)
+        if active_element is None or other_element is None:
+            self.report({"ERROR"}, "Both selected objects must be IFC elements.")
+            return {"CANCELLED"}
+        if segments_are_parallel(active, other):
+            self.report({"ERROR"}, "Bend preview is for non-parallel segments only.")
+            return {"CANCELLED"}
+
+        # Pre-check the same preconditions MEPAddBend enforces so the user
+        # sees the rejection here rather than after tuning a doomed preview.
+        precondition_error = validate_bend_preconditions(active_element, other_element)
+        if precondition_error is not None:
+            self.report({"ERROR"}, precondition_error)
+            return {"CANCELLED"}
+
+        preview_base.sync_uncommitted_moves([active, other])
+
+        props = preview_base.get_preview_props(context, "bend")
+        # Auto-cancel any prior preview so re-clicking join on a different
+        # pair doesn't silently commit the previous tuning.
+        if props is not None and props.is_active:
+            bpy.ops.bim.cancel_bend_preview()
+
+        props.start_segment_id = active_element.id()
+        props.end_segment_id = other_element.id()
+        props.start_length = 0.1
+        props.end_length = 0.1
+        props.radius = 0.2
+        props.is_active = True
+        return {"FINISHED"}
+
+
+class FinishBendPreview(bpy.types.Operator):
+    """Commit the previewed bend with the tuned parameters and exit preview.
+
+    Preview state survives a failed commit so the user can re-tune without
+    re-selecting."""
+
+    bl_idname = "bim.finish_bend_preview"
+    bl_label = "Apply Bend"
+    bl_description = "Commit the bend with the previewed parameters"
+    bl_options = {"REGISTER", "UNDO"}
+
+    def execute(self, context):
+        return preview_base.commit_preview(
+            self,
+            context,
+            "bend",
+            "mep_add_bend",
+            ("start_segment_id", "end_segment_id", "start_length", "end_length", "radius", "editing_bend_id"),
+        )
+
+
+class CancelBendPreview(bpy.types.Operator):
+    """Exit bend preview without committing."""
+
+    bl_idname = "bim.cancel_bend_preview"
+    bl_label = "Cancel Bend"
+    bl_description = "Discard the previewed bend"
+    bl_options = {"REGISTER", "UNDO"}
+
+    def execute(self, context):
+        if context.screen is None:
+            return {"CANCELLED"}
+        props = preview_base.get_preview_props(context, "bend")
+        if props is None or not props.is_active:
+            return {"CANCELLED"}
+        preview_base.clear_preview_state(props)
+        return {"FINISHED"}
+
+
+class EnableBendPreviewFromBend(bpy.types.Operator):
+    """Re-open the bend preview on an existing bend fitting.
+
+    Resolves the two connected segments via the bend's ports +
+    ``IfcRelConnectsPorts``, reads parametric values back from the bend's
+    ``BBIM_Fitting`` pset, and flags the preview so committing replaces
+    the existing bend in place."""
+
+    bl_idname = "bim.enable_bend_preview_from_bend"
+    bl_label = "Edit Bend"
+    bl_description = "Re-open the bend preview to retune an existing bend"
+    bl_options = {"REGISTER", "UNDO"}
+
+    @classmethod
+    def poll(cls, context):
+        active = context.active_object
+        if active is None:
+            cls.poll_message_set("No active object.")
+            return False
+        element = tool.Ifc.get_entity(active)
+        if element is None or not _is_bend_fitting(element):
+            cls.poll_message_set("Active object must be a bend fitting.")
+            return False
+        return True
+
+    def execute(self, context):
+        active = context.active_object
+        bend_element = tool.Ifc.get_entity(active)
+        if bend_element is None or not _is_bend_fitting(bend_element):
+            self.report({"ERROR"}, "Active object is not a bend fitting.")
+            return {"CANCELLED"}
+
+        connected_segments: list = []
+        for port in tool.System.get_ports(bend_element):
+            connected_port = tool.System.get_connected_port(port)
+            if connected_port is None:
+                continue
+            related = tool.System.get_port_relating_element(connected_port)
+            if related is not None and related.is_a("IfcFlowSegment") and related not in connected_segments:
+                connected_segments.append(related)
+
+        if len(connected_segments) != 2:
+            self.report(
+                {"ERROR"},
+                f"Bend has {len(connected_segments)} connected segments; need exactly 2 to re-edit.",
+            )
+            return {"CANCELLED"}
+
+        # Read parametric values from the bend type's BBIM_Fitting pset. The
+        # type carries the canonical parameters; querying the occurrence
+        # would force a get_type round-trip and miss user-edited types.
+        bend_type = ifcopenshell.util.element.get_type(bend_element)
+        if bend_type is None:
+            self.report({"ERROR"}, "Bend fitting has no type to read parameters from.")
+            return {"CANCELLED"}
+        bend_type_obj = tool.Ifc.get_object(bend_type)
+        if bend_type_obj is None:
+            self.report({"ERROR"}, "Bend type has no Blender object — cannot read pset.")
+            return {"CANCELLED"}
+        bbim = tool.Model.get_modeling_bbim_pset_data(bend_type_obj, "BBIM_Fitting")
+        if bbim is None:
+            self.report({"ERROR"}, "Bend fitting has no BBIM_Fitting pset — not a parametric bend.")
+            return {"CANCELLED"}
+        data = bbim.get("data_dict", {})
+
+        props = preview_base.get_preview_props(context, "bend")
+        if props is not None and props.is_active:
+            bpy.ops.bim.cancel_bend_preview()
+
+        # Segment order is load-bearing: the bend's lateral sign and z-axis
+        # flip are derived from which segment is "start" vs "end". Re-edit
+        # must reuse the same pairing as the original create so the recreate
+        # lands at the same orientation.
+        start_segment, end_segment = connected_segments
+        props.start_segment_id = start_segment.id()
+        props.end_segment_id = end_segment.id()
+        # Pset values are in IFC native units; scene units come from si_conversion.
+        si_conversion = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
+        props.start_length = float(data.get("start_length", 0.1)) * si_conversion
+        props.end_length = float(data.get("end_length", 0.1)) * si_conversion
+        props.radius = float(data.get("radius", 0.2)) * si_conversion
+        props.editing_bend_id = bend_element.id()
+        props.is_active = True
+        return {"FINISHED"}
+
+
+def _bend_preview_segments(context):
+    """Resolve the two segment objects from the scene-level preview props.
+
+    Re-resolves by IFC id each frame so undo / file reload during preview
+    never dangles a stale bpy reference."""
+    props = context.scene.BIMPreviewProperties.bend
+    ifc_file = tool.Ifc.get()
+    if ifc_file is None or not props.is_active:
+        return None, None
+    try:
+        start_element = ifc_file.by_id(props.start_segment_id)
+        end_element = ifc_file.by_id(props.end_segment_id)
+    except Exception:
+        return None, None
+    start_obj = tool.Ifc.get_object(start_element) if start_element else None
+    end_obj = tool.Ifc.get_object(end_element) if end_element else None
+    return start_obj, end_obj
+
+
+def _gizmo_x_matrix(location: Vector, x_direction: Vector) -> Matrix:
+    """Build a 4x4 matrix placing a gizmo at ``location`` with its local +X
+    axis aligned to ``x_direction`` in world space. ``BIM_GT_gizmo_dimension``
+    draws + drags along local +X by convention."""
+    x = x_direction.normalized()
+    seed = Vector((0, 0, 1)) if abs(x.z) < 0.9 else Vector((1, 0, 0))
+    y = (seed - x * seed.dot(x)).normalized()
+    z = x.cross(y)
+    mat = Matrix.Identity(4)
+    mat[0][:3] = (x.x, y.x, z.x)
+    mat[1][:3] = (x.y, y.y, z.y)
+    mat[2][:3] = (x.z, y.z, z.z)
+    mat.translation = location
+    return mat
+
+
+class GizmoBendPreview(bpy.types.GizmoGroup):
+    """Interactive gizmo group for the bend preview flow.
+
+    Three dimension widgets drag start_length / end_length / radius; two
+    icon gizmos commit or cancel. When the geometry is degenerate the
+    dimensions and validate hide but cancel stays visible so the user
+    always has an exit."""
+
+    bl_idname = "OBJECT_GGT_bim_bend_preview"
+    bl_label = "Bend Preview Gizmos"
+    bl_space_type = "VIEW_3D"
+    bl_region_type = "WINDOW"
+    bl_options = {"3D", "PERSISTENT"}
+
+    ICON_SCALE: ClassVar[float] = 0.375
+    ICON_SPACING_X: ClassVar[float] = 0.4
+    ICON_Z_OFFSET: ClassVar[float] = 1.5
+
+    @classmethod
+    def poll(cls, context):
+        preview = getattr(context.scene, "BIMPreviewProperties", None)
+        props = preview.bend if preview is not None else None
+        if props is None or not props.is_active:
+            return False
+        if not tool.Blender.are_viewport_gizmos_enabled():
+            return False
+        ifc_file = tool.Ifc.get()
+        if ifc_file is None:
+            return False
+        try:
+            ifc_file.by_id(props.start_segment_id)
+            ifc_file.by_id(props.end_segment_id)
+        except (RuntimeError, KeyError):
+            return False
+        return True
+
+    def setup(self, context):
+        prefs = tool.Blender.get_addon_preferences()
+        default_color = tuple(prefs.decorations_colour[:3])
+        highlight_color = tuple(prefs.decorator_color_selected[:3])
+
+        _props = preview_base.make_props_callback("bend")
+
+        def setup_dimension(attr: str, prop_name: str, invert_delta: bool = False) -> bpy.types.Gizmo:
+            gz = self.gizmos.new("BIM_GT_gizmo_dimension")
+            gz.move_get_cb = preview_base.make_dim_getter(_props, attr)
+            gz.move_set_cb = preview_base.make_dim_setter(_props, attr)
+            gz.axis = Vector((1, 0, 0))
+            gz.invert_delta = invert_delta
+            gz.delta_scale = 1.0
+            gz.prop_name = prop_name
+            gz.gizmo_group = self
+            gz.color = default_color
+            gz.color_highlight = highlight_color
+            gz.alpha = 1.0
+            gz.use_draw_modal = True
+            gz.use_draw_scale = False
+            gz.text_offset_sign = 1
+            gz.text_alignment = gizmo.TextAlignment.CENTER
+            gz.show_start_arrow = False
+            gz.show_end_arrow = True
+            gz.show_extension_lines = False
+            gz.text_formatter = None
+            return gz
+
+        self.start_dim = setup_dimension("start_length", "Start Length")
+        self.end_dim = setup_dimension("end_length", "End Length")
+        self.radius_dim = setup_dimension("radius", "Radius")
+
+        from bonsai.bim.module.drawing.gizmos import BaseParametricGizmoGroup
+
+        self.validate_icon = self.gizmos.new("VIEW3D_GT_validate")
+        self.validate_icon.use_draw_scale = False
+        self.validate_icon.color = BaseParametricGizmoGroup.COLOR_GREEN
+        self.validate_icon.color_highlight = highlight_color
+        self.validate_icon.target_set_operator("bim.finish_bend_preview")
+
+        self.cancel_icon = self.gizmos.new("VIEW3D_GT_cancel")
+        self.cancel_icon.use_draw_scale = False
+        self.cancel_icon.color = BaseParametricGizmoGroup.COLOR_RED
+        self.cancel_icon.color_highlight = highlight_color
+        self.cancel_icon.target_set_operator("bim.cancel_bend_preview")
+
+    def refresh(self, context):
+        self._position_gizmos(context)
+
+    def draw_prepare(self, context):
+        self._position_gizmos(context)
+
+    def _position_gizmos(self, context):
+        """Place gizmos at the bend intersection using the current scene
+        props. Cancel stays visible on degenerate geometry so the user
+        always has an exit; the other widgets hide when there's no defined
+        tangent / arc to anchor them on."""
+        start_obj, end_obj = _bend_preview_segments(context)
+        if start_obj is None or end_obj is None:
+            for gz in (self.start_dim, self.end_dim, self.radius_dim, self.validate_icon, self.cancel_icon):
+                gz.hide = True
+            return
+
+        props = context.scene.BIMPreviewProperties.bend
+        preview = cached_compute_bend_preview_polylines(
+            start_obj, end_obj, props.start_length, props.end_length, props.radius
+        )
+        if not preview["valid"]:
+            for gz in (self.start_dim, self.end_dim, self.radius_dim, self.validate_icon):
+                gz.hide = True
+            self.cancel_icon.hide = False
+            axes = preview.get("invalid_axes") or []
+            if axes:
+                intersection_point = axes[0][1]
+                billboard_rot = gizmo.get_billboard_rotation(context)
+                anchor = intersection_point + Vector((0, 0, self.ICON_Z_OFFSET))
+                self.cancel_icon.matrix_basis = gizmo.billboarded_at(anchor, billboard_rot, scale=self.ICON_SCALE)
+            return
+
+        for gz in (self.start_dim, self.end_dim, self.radius_dim, self.validate_icon, self.cancel_icon):
+            gz.hide = False
+
+        leg_a_far, leg_a_end = preview["leg_a"]
+        leg_b_far, leg_b_end = preview["leg_b"]
+        toward_bend_a = (
+            (leg_a_end - leg_a_far).normalized() if (leg_a_end - leg_a_far).length > 1e-6 else Vector((0, 0, 1))
+        )
+        toward_bend_b = (
+            (leg_b_end - leg_b_far).normalized() if (leg_b_end - leg_b_far).length > 1e-6 else Vector((0, 0, 1))
+        )
+        leg_a_tangent = leg_a_end + toward_bend_a * props.start_length
+        leg_b_tangent = leg_b_end + toward_bend_b * props.end_length
+
+        # axis is set in world space every frame so the drag projection
+        # matches the visual regardless of either segment's matrix_world.
+        self.start_dim.matrix_basis = _gizmo_x_matrix(leg_a_tangent, -toward_bend_a)
+        self.start_dim.axis = -toward_bend_a
+        self.start_dim.set_dimension_length(props.start_length)
+        self.end_dim.matrix_basis = _gizmo_x_matrix(leg_b_tangent, -toward_bend_b)
+        self.end_dim.axis = -toward_bend_b
+        self.end_dim.set_dimension_length(props.end_length)
+
+        arc = preview["arc"]
+        if len(arc) >= 3:
+            mid = len(arc) // 2
+            chord_mid = (arc[0] + arc[-1]) * 0.5
+            toward_mid = arc[mid] - chord_mid
+            if toward_mid.length > 1e-6:
+                toward_mid = toward_mid.normalized()
+                half_chord = (arc[-1] - arc[0]).length * 0.5
+                center_dist = max(0.0, props.radius * props.radius - half_chord * half_chord) ** 0.5
+                arc_center = chord_mid - toward_mid * center_dist
+                radial_out = arc[mid] - arc_center
+                if radial_out.length > 1e-6:
+                    radial_out.normalize()
+                    inward = -radial_out
+                    self.radius_dim.matrix_basis = _gizmo_x_matrix(arc[mid], inward)
+                    self.radius_dim.axis = inward
+                    self.radius_dim.set_dimension_length(props.radius)
+                else:
+                    self.radius_dim.hide = True
+            else:
+                self.radius_dim.hide = True
+        else:
+            self.radius_dim.hide = True
+
+        billboard_rot = gizmo.get_billboard_rotation(context)
+        anchor_base = arc[len(arc) // 2] if arc else (leg_a_end + leg_b_end) * 0.5
+        anchor = anchor_base + Vector((0, 0, self.ICON_Z_OFFSET))
+        offset_x = billboard_rot @ Vector((self.ICON_SPACING_X, 0.0, 0.0))
+        self.validate_icon.matrix_basis = gizmo.billboarded_at(anchor, billboard_rot, scale=self.ICON_SCALE)
+        self.cancel_icon.matrix_basis = gizmo.billboarded_at(anchor + offset_x, billboard_rot, scale=self.ICON_SCALE)

src/bonsai/bonsai/bim/module/model/opening.py

@@ -15,6 +15,8 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was modified with the assistance of an AI coding tool.
 
 from collections.abc import Sequence
 from math import radians
@@ -207,6 +209,21 @@ def _get_cached_world_draw_data(
 # handle each call), so they stay drawable across frames.
 _batch_cache: dict[tuple[int, str], tuple[int, "gpu.types.GPUBatch"]] = {}
 
+# CAD hidden-line convention for the occluded back-pass: world-space dashes so
+# density stays coherent across zoom. Dash + gap = period; dash_width controls
+# the "on" portion.
+_DASH_PERIOD_METERS: float = 0.20
+_DASH_WIDTH_METERS: float = 0.10
+# Solid front pass is rendered wider than the dashed back pass so its halo
+# overpowers the dashed center on visible edges even when the WIRE-display
+# overlay biases the depth buffer at outline pixels.
+_DASH_LINE_WIDTH: float = 1.5
+_SOLID_LINE_WIDTH: float = 2.5
+# Per-iteration default line width used by every non-occlusion draw call in
+# this decorator's ``__call__``. Restored after each occlusion pair so the
+# next draw isn't silently inheriting the wider solid-pass override.
+_DEFAULT_LINE_WIDTH: float = 2.0
+
 
 def _get_cached_batch_or_none(cache_key: tuple[int, str]) -> "gpu.types.GPUBatch | None":
     uid = cache_key[0]
@@ -223,15 +240,30 @@ def _store_batch_in_cache(cache_key: tuple[int, str], batch: "gpu.types.GPUBatch
     _batch_cache[cache_key] = (epoch, batch)
 
 
+def is_filling_supported(element) -> bool:
+    """True when Bonsai's opening generator can derive an opening from this
+    element. IFC's schema permits any IfcElement as a filling; Bonsai
+    currently supports only IfcDoor and IfcWindow because those are the
+    classes with OverallWidth/OverallHeight attributes (or their types'
+    ELEVATION_VIEW profiles) that the generator can consume."""
+    return element is not None and element.is_a() in ("IfcDoor", "IfcWindow")
+
+
 class FilledOpeningGenerator:
     def generate(
         self,
         filling_obj: bpy.types.Object,
         voided_obj: bpy.types.Object,
         target: Optional[Vector] = None,
+        preserve_placement: bool = False,
     ) -> Union[None, str]:
         """
         :param target: Target opening position. If ommited, cursor position is used.
+        :param preserve_placement: If True, keep ``filling_obj.matrix_world`` as-is
+            and skip the snap-to-wall-axis / rl1-rl2 Z-default logic. The opening
+            is still created at the filling's current world position. Useful
+            when the caller (e.g. the SHIFT-add-opening gizmo flow) has
+            already positioned the filling intentionally.
         :return: None if there was no errors, otherwise returns a string with error message.
         """
         props = tool.Model.get_model_props()
@@ -253,7 +285,7 @@ class FilledOpeningGenerator:
             should_set_z_level = False
 
         # Sometimes, the voided_obj may be an aggregate, which won't have any representation.
-        if voided_obj.data:
+        if not preserve_placement and voided_obj.data:
             raycast = voided_obj.closest_point_on_mesh(voided_obj.matrix_world.inverted() @ target, distance=0.01)
             if not raycast[0]:
                 target = filling_obj.matrix_world.translation.copy()
@@ -386,18 +418,16 @@ class FilledOpeningGenerator:
                 representation = tool.Geometry.get_representation_by_context(voided_element, context)
                 assert representation
 
-                bonsai.core.geometry.switch_representation(
-                    tool.Ifc,
-                    tool.Geometry,
-                    obj=voided_obj,
-                    representation=representation,
-                )
+                tool.Geometry.recut_host(voided_obj, representation)
 
     def regenerate_from_type(self, usecase_path: str, ifc_file: ifcopenshell.file, settings: dict[str, Any]) -> None:
         relating_type = settings["relating_type"]
 
-        for related_object in settings["related_objects"]:
-            self._regenerate_from_type(related_object)
+        # Filling type-switch on an array of fillings fans out N host recuts —
+        # one per related object — without batching. Coalesce them.
+        with tool.Geometry.batch_host_recut():
+            for related_object in settings["related_objects"]:
+                self._regenerate_from_type(related_object)
 
     def _regenerate_from_type(self, related_object: ifcopenshell.entity_instance) -> None:
         filling = related_object
@@ -446,12 +476,7 @@ class FilledOpeningGenerator:
             representation = tool.Geometry.get_active_representation(voided_obj)
             if not representation:
                 continue
-            bonsai.core.geometry.switch_representation(
-                tool.Ifc,
-                tool.Geometry,
-                obj=voided_obj,
-                representation=representation,
-            )
+            tool.Geometry.recut_host(voided_obj, representation)
 
     def generate_opening_from_filling(
         self,
@@ -586,6 +611,31 @@ class RecalculateFill(bpy.types.Operator, tool.Ifc.Operator):
         return context.selected_objects
 
     def _execute(self, context):
+        # N selected fillings × M voided host parts would fire N×M host recuts
+        # without batching. Coalesce per host.
+        with tool.Geometry.batch_host_recut():
+            return self._recalculate_fills(context)
+
+    def _recalculate_fills(self, context):
+        # Refresh each selected filling's mapped opening source before
+        # recutting the host. Dedup by source id covers the common shared-
+        # source case in one rewrite while leaving unrelated sibling sources
+        # untouched.
+        seen_source_ids: set[int] = set()
+        for obj in context.selected_objects:
+            element = tool.Ifc.get_entity(obj)
+            if not element or not element.FillsVoids:
+                continue
+            opening = element.FillsVoids[0].RelatingOpeningElement
+            body = tool.Geometry.get_body_representation(opening)
+            if body is None:
+                continue
+            source = tool.Geometry.resolve_mapped_representation(body)
+            if source.id() in seen_source_ids:
+                continue
+            seen_source_ids.add(source.id())
+            tool.Model.regenerate_filling_opening_body(element)
+
         for obj in context.selected_objects:
             element = tool.Ifc.get_entity(obj)
             if not element or not element.FillsVoids:
@@ -614,12 +664,7 @@ class RecalculateFill(bpy.types.Operator, tool.Ifc.Operator):
                 if building_obj and building_obj.data:
                     representation = tool.Geometry.get_active_representation(building_obj)
                     if representation:
-                        bonsai.core.geometry.switch_representation(
-                            tool.Ifc,
-                            tool.Geometry,
-                            obj=building_obj,
-                            representation=representation,
-                        )
+                        tool.Geometry.recut_host(building_obj, representation)
 
         # Refresh cut decorator
         DecoratorData.cut_cache.clear()
@@ -737,6 +782,29 @@ class AddBoolean(Operator, tool.Ifc.Operator):
         tool.Root.reload_item_decorator()
 
 
+class ToggleHostOpenings(Operator, tool.Ifc.Operator):
+    bl_idname = "bim.toggle_host_openings"
+    bl_label = "Toggle Openings"
+    bl_description = "Show or hide opening fills (doors and windows) in the viewport\n\nHotkey: Alt+O"
+    bl_options = {"REGISTER", "UNDO"}
+
+    @classmethod
+    def poll(cls, context):
+        if not tool.Model.has_selected_ifc_objects():
+            cls.poll_message_set("No IFC objects selected.")
+            return False
+        return True
+
+    def _execute(self, context: bpy.types.Context) -> set[str]:
+        # Opening visibility is independent of host geometry — don't commit any
+        # active parametric edit; the user can keep editing the host.
+        if tool.Model.get_model_props().openings:
+            bpy.ops.bim.edit_openings(apply_all=True)
+        else:
+            bpy.ops.bim.show_openings()
+        return {"FINISHED"}
+
+
 class ShowOpenings(Operator, tool.Ifc.Operator):
     bl_idname = "bim.show_openings"
     bl_label = "Show Openings"
@@ -918,27 +986,29 @@ class EditOpenings(Operator, tool.Ifc.Operator):
         for opening_element in opening_elements:
             opening_obj = tool.Ifc.get_object(opening_element)
 
-            similar_openings = bonsai.core.geometry.get_similar_openings(tool.Ifc, opening_element)
-            similar_openings_building_objs = bonsai.core.geometry.get_similar_openings_building_objs(
-                tool.Ifc, similar_openings
-            )
-            building_objs.update(similar_openings_building_objs)
-
             if opening_obj:
-                if tool.Ifc.is_edited(opening_obj):
-                    tool.Geometry.run_geometry_update_representation(obj=opening_obj)
-                    bonsai.core.geometry.edit_similar_opening_placement(
-                        tool.Geometry, opening_element, similar_openings
-                    )
-                elif tool.Ifc.is_moved(opening_obj):
-                    bonsai.core.geometry.edit_object_placement(tool.Ifc, tool.Geometry, tool.Surveyor, obj=opening_obj)
+                opening_edited = tool.Ifc.is_edited(opening_obj)
+                opening_moved = tool.Ifc.is_moved(opening_obj)
+                # Sibling walls only need a viewport-level refresh when the
+                # opening's shape or placement actually changed — a pure
+                # show/hide toggle leaves them in their existing state.
+                if opening_edited or opening_moved:
+                    similar_openings = bonsai.core.geometry.get_similar_openings(tool.Ifc, opening_element)
+                    similar_openings_building_objs = bonsai.core.geometry.get_similar_openings_building_objs(
+                        tool.Ifc, similar_openings
+                    )
+                    building_objs.update(similar_openings_building_objs)
+                    if opening_edited:
+                        tool.Geometry.run_geometry_update_representation(obj=opening_obj)
+                    else:
+                        bonsai.core.geometry.edit_object_placement(
+                            tool.Ifc, tool.Geometry, tool.Surveyor, obj=opening_obj
+                        )
                     bonsai.core.geometry.edit_similar_opening_placement(
                         tool.Geometry, opening_element, similar_openings
                     )
+                    building_objs.update(self.get_all_building_objects_of_similar_openings(opening_element))
 
-                building_objs.update(
-                    self.get_all_building_objects_of_similar_openings(opening_element)
-                )  # NB this has nothing to do with clone similar_opening
                 tool.Ifc.unlink(element=opening_element)
                 if props.representation_obj == opening_obj:
                     props.representation_obj = None
@@ -976,6 +1046,12 @@ class CloneOpening(Operator, tool.Ifc.Operator):
         return True
 
     def _execute(self, context):
+        # The voided host may be an aggregate whose parts each get recut.
+        # Coalesce per host so a many-parts aggregate doesn't fan out.
+        with tool.Geometry.batch_host_recut():
+            return self._clone_opening(context)
+
+    def _clone_opening(self, context):
         # NOTE: Operator displayed in UI only with IfcOpeningElement being active.
         ifc_file = tool.Ifc.get()
         objects = bpy.context.selected_objects
@@ -1005,12 +1081,7 @@ class CloneOpening(Operator, tool.Ifc.Operator):
                 continue
             representation = tool.Geometry.get_active_representation(obj)
             assert representation
-            bonsai.core.geometry.switch_representation(
-                tool.Ifc,
-                tool.Geometry,
-                obj=obj,
-                representation=representation,
-            )
+            tool.Geometry.recut_host(obj, representation)
 
         return {"FINISHED"}
 
@@ -1160,22 +1231,55 @@ class DecorationsHandler:
         shader.uniform_float("color", color)
         batch.draw(shader)
 
-    def _draw_lines_with_occlusion(self, verts, color, edges_indices, occluded_alpha: float = 0.25, cache_key=None):
-        # One batch, two draws: front pass at full color, occluded pass at
-        # `occluded_alpha`. Save/restore depth_test matches the pattern in
-        # bim/module/structural/decorator.py so callers' state survives.
-        batch = self._get_or_build_batch(self.line_shader, "LINES", verts, edges_indices, cache_key=cache_key)
-        if batch is None:
+    def _draw_lines_with_occlusion(self, verts, color, edges_indices, cache_key=None):
+        # Two-pass CAD hidden-line convention. Both passes use POLYLINE_UNIFORM_COLOR.
+        #
+        # The solid front pass is rendered WIDER than the dashed back pass so it
+        # produces a halo around the line center, beyond the depth-bias zone that
+        # Blender's overlay engine writes when an opening is set to WIRE display.
+        # Without the width difference, the wire bias makes the center-pixel
+        # ``LESS_EQUAL`` comparison fail (line ends up slightly behind the biased
+        # wire depth) so the solid pass would lose to the dashed back pass even
+        # on visible edges. The halo gives the solid pass enough screen-space to
+        # overpower the dashed pattern visually.
+        #
+        # Dashed renders first at the standard width so the solid overlay's wider
+        # halo cleanly hides it on visible edges; on occluded edges the solid
+        # ``LESS_EQUAL`` pass fails against the wall depth and the dashed remains.
+        front_batch = self._get_or_build_batch(self.line_shader, "LINES", verts, edges_indices, cache_key=cache_key)
+        if front_batch is None:
             return
+
+        dashed_cache_key = (cache_key[0], cache_key[1] + "_dashed") if cache_key is not None else None
+        dash_batch = None
+        if dashed_cache_key is not None:
+            dash_batch = _get_cached_batch_or_none(dashed_cache_key)
+        if dash_batch is None:
+            dash_verts, dash_edges = tool.Blender.build_dashed_line_segments(
+                verts, edges_indices, _DASH_PERIOD_METERS, _DASH_WIDTH_METERS
+            )
+            dash_batch = self._get_or_build_batch(self.line_shader, "LINES", dash_verts, dash_edges)
+            if dash_batch is not None and dashed_cache_key is not None:
+                _store_batch_in_cache(dashed_cache_key, dash_batch)
+
         original_depth_test = gpu.state.depth_test_get()
+        front_color = list(color)
+        front_color[3] = 1.0
+        self.line_shader.uniform_float("color", front_color)
+
+        if dash_batch is not None:
+            self.line_shader.uniform_float("lineWidth", _DASH_LINE_WIDTH)
+            gpu.state.depth_test_set("ALWAYS")
+            dash_batch.draw(self.line_shader)
+
+        self.line_shader.uniform_float("lineWidth", _SOLID_LINE_WIDTH)
         gpu.state.depth_test_set("LESS_EQUAL")
-        self.line_shader.uniform_float("color", color)
-        batch.draw(self.line_shader)
-        gpu.state.depth_test_set("GREATER")
-        dimmed = list(color)
-        dimmed[3] = occluded_alpha
-        self.line_shader.uniform_float("color", dimmed)
-        batch.draw(self.line_shader)
+        front_batch.draw(self.line_shader)
+
+        # Restore the per-iteration default set at the top of __call__ so
+        # subsequent draws (the HalfSpaceSolid arrow, future call-sites) are
+        # not silently affected by the front-pass width override.
+        self.line_shader.uniform_float("lineWidth", _DEFAULT_LINE_WIDTH)
         gpu.state.depth_test_set(original_depth_test)
 
     def __call__(self, context):
@@ -1211,7 +1315,7 @@ class DecorationsHandler:
             self.line_shader.bind()  # required to be able to change uniforms of the shader
             # POLYLINE_UNIFORM_COLOR specific uniforms
             self.line_shader.uniform_float("viewportSize", (context.region.width, context.region.height))
-            self.line_shader.uniform_float("lineWidth", 2.0)
+            self.line_shader.uniform_float("lineWidth", _DEFAULT_LINE_WIDTH)
 
             # general shader
             self.shader = gpu.shader.from_builtin("UNIFORM_COLOR")
@@ -1249,9 +1353,7 @@ class DecorationsHandler:
                 self.draw_batch("LINES", verts, selected_elements_color, selected_edges)
                 self.draw_batch("POINTS", unselected_vertices, unselected_elements_color)
                 self.draw_batch("POINTS", selected_vertices, selected_elements_color)
-                obj.data.calc_loop_triangles()
-                tris = [tuple(t.vertices) for t in obj.data.loop_triangles]
-                self.draw_batch("TRIS", verts, transparent_color(special_elements_color), tris)
+                tool.Blender.draw_bmesh_face_tris(bm, verts, transparent_color(special_elements_color), self.draw_batch)
             else:
                 line_verts, verts, edges_indices, tris = _get_cached_world_draw_data(obj)
                 color = selected_elements_color if obj in context.selected_objects else special_elements_color

src/bonsai/bonsai/bim/module/model/preview_base.py

@@ -163,6 +163,59 @@ def sync_uncommitted_moves(objects: list) -> None:
         tool.Geometry.commit_placement_if_moved(obj, apply_scale=False)
 
 
+def clear_preview_state(props: bpy.types.PropertyGroup) -> None:
+    """Reset a preview PropertyGroup to its idle state on commit / cancel.
+
+    Sets ``is_active`` to False and zeros every ``IntProperty`` whose name
+    ends in ``_id`` (the entity-reference convention every preview follows).
+    Other fields are left at their last value — defaults are re-applied on
+    the next enable, so leaving them alone avoids a redundant write."""
+    props.is_active = False
+    for name, rna in props.bl_rna.properties.items():
+        if name.endswith("_id") and rna.type == "INT":
+            setattr(props, name, 0)
+
+
+# --- Standard Finish flow ----------------------------------------------------
+
+
+def commit_preview(
+    operator: bpy.types.Operator,
+    context: bpy.types.Context,
+    attr: str,
+    target_op_name: str,
+    kwarg_names: tuple[str, ...],
+) -> set[str]:
+    """Standard Finish-Preview dispatch: validate context + active preview,
+    read kwargs off the draft, call ``bpy.ops.bim.<target_op_name>(**kwargs)``,
+    and clear the preview on success.
+
+    The dispatched operator's own ``self.report({"ERROR"})`` paths are promoted
+    by ``bpy.ops`` to ``RuntimeError`` — catching it here surfaces the message
+    to the user via ``operator.report`` rather than leaving Blender's operator
+    state half-broken (which silently disables downstream gizmo polls).
+
+    Returns the dispatched operator's result set verbatim so callers can
+    pass it straight back from their own ``execute``."""
+    if context.screen is None:
+        return {"CANCELLED"}
+    props = get_preview_props(context, attr)
+    if props is None or not props.is_active:
+        return {"CANCELLED"}
+    if tool.Ifc.get() is None:
+        operator.report({"ERROR"}, "No IFC file loaded.")
+        return {"CANCELLED"}
+    kwargs = {name: getattr(props, name) for name in kwarg_names}
+    try:
+        result = getattr(bpy.ops.bim, target_op_name)(**kwargs)
+    except RuntimeError as exc:
+        operator.report({"ERROR"}, str(exc))
+        return {"CANCELLED"}
+    if "FINISHED" in result:
+        clear_preview_state(props)
+    return result
+
+
 # --- Esc dispatch ------------------------------------------------------------
 
 PREVIEW_CANCEL_OPS: tuple[tuple[str, str], ...] = (

src/bonsai/bonsai/bim/module/model/profile.py

@@ -1002,6 +1002,14 @@ class EnableEditingExtrusionAxis(bpy.types.Operator, tool.Ifc.Operator):
     def _execute(self, context):
         self.unit_scale = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
         obj = context.active_object
+
+        # Commit any in-progress parametric (gizmo) draft on this object
+        # before switching to axis-edit. Otherwise the in-memory draft
+        # state is overwritten when the axis mesh is imported below,
+        # silently discarding the user's pending dimension edits.
+        if feature := tool.Parametric.is_object_editing(obj):
+            tool.Parametric.commit_object_draft(obj, feature.finish_op)
+
         element = tool.Ifc.get_entity(obj)
 
         axis = ifcopenshell.util.representation.get_representation(element, "Model", "Axis", "GRAPH_VIEW")
@@ -1157,7 +1165,8 @@ class DrawPolylineProfile(bpy.types.Operator, PolylineOperator, tool.Ifc.Operato
                         DumbProfileJoiner().join_V(profile2["obj"], profile1["obj"])
                         if connect_IfcFlowSegments:
                             bpy.ops.bim.mep_connect_elements(
-                                obj1_name=profile1["obj"].name, obj2_name=profile2["obj"].name
+                                obj1_guid=tool.Ifc.get_entity(profile1["obj"]).GlobalId,
+                                obj2_guid=tool.Ifc.get_entity(profile2["obj"]).GlobalId,
                             )
 
     def modal(self, context, event):

src/bonsai/bonsai/bim/module/model/prop.py

@@ -33,8 +33,10 @@ from bonsai.bim.module.drawing.decoration import CutDecorator
 from bonsai.bim.module.model.data import AuthoringData
 from bonsai.bim.module.model.decorator import (
     BoundingBoxDecorator,
+    MEPSystemPathDecorator,
     SlabDirectionDecorator,
     WallAxisDecorator,
+    WallSystemPathDecorator,
 )
 from bonsai.bim.module.model.door import update_door_modifier_bmesh
 from bonsai.bim.module.model.window import update_window_modifier_bmesh
@@ -103,8 +105,12 @@ def update_type_page(self: "BIMModelProperties", context: bpy.types.Context) ->
 
 
 def update_relating_array_from_object(self: "BIMArrayProperties", context: bpy.types.Context) -> None:
-    bpy.ops.bim.enable_editing_array(item=self.is_editing)
-    return
+    # Skip the cleanup-time clear: Finish/Cancel sets relating_array_object back to None,
+    # which has no source to hydrate from. Only the user-driven pick (None → some array)
+    # should auto-enter edit on the picked source's layer 0.
+    if self.relating_array_object is None:
+        return
+    bpy.ops.bim.enable_editing_array(item=0)
 
 
 def is_object_array_applicable(self: "BIMArrayProperties", obj: bpy.types.Object) -> bool:
@@ -128,6 +134,19 @@ def update_slab_direction_decorator(self: "BIMModelProperties", context: bpy.typ
         SlabDirectionDecorator.uninstall()
 
 
+def update_paths_decorator(self: "BIMModelProperties", context: bpy.types.Context) -> None:
+    """Unified toggle for connected-element path overlays. Drives both the
+    MEP and wall path decorators — each decorator's ``draw`` short-circuits
+    when its kind of element isn't selected, so leaving both installed is
+    cheap and lets one toggle cover any connected-element family."""
+    if self.show_paths:
+        MEPSystemPathDecorator.install(bpy.context)
+        WallSystemPathDecorator.install(bpy.context)
+    else:
+        MEPSystemPathDecorator.uninstall()
+        WallSystemPathDecorator.uninstall()
+
+
 def update_measure_xyz(self: "BIMModelProperties", context: bpy.types.Context) -> None:
     if self.show_bounding_box:
         BoundingBoxDecorator.install(context)
@@ -224,11 +243,7 @@ def update_wall_offset_baseline(self: "BIMWallProperties", context: bpy.types.Co
 def update_railing(self: "BIMRailingProperties", context: bpy.types.Context) -> None:
     """Regenerate railing mesh when property changes."""
     if self.is_editing:
-        # Only FRAMELESS_PANEL can update live via bmesh.
-        # WALL_MOUNTED_HANDRAIL geometry is generated from IFC representation,
-        # so it only updates on "Finish Editing" to avoid modifying IFC during preview.
-        if self.railing_type == "FRAMELESS_PANEL":
-            _get_updater("railing", "update_railing_modifier_bmesh")(context)
+        _get_updater("railing", "update_railing_modifier_bmesh")(context)
 
 
 def update_roof(self: "BIMRoofProperties", context: bpy.types.Context) -> None:
@@ -238,6 +253,20 @@ def update_roof(self: "BIMRoofProperties", context: bpy.types.Context) -> None:
         _get_updater("roof", "update_roof_modifier_bmesh")(obj)
 
 
+def update_pipe_segment(self: "BIMPipeSegmentProperties", context: bpy.types.Context) -> None:
+    """Regenerate pipe-segment preview mesh from props during edit. Does NOT touch IFC."""
+    obj = context.active_object
+    if obj and self.is_editing:
+        _get_updater("mep", "regenerate_pipe_segment_mesh_from_props")(obj)
+
+
+def update_duct_segment(self: "BIMDuctSegmentProperties", context: bpy.types.Context) -> None:
+    """Regenerate duct-segment preview mesh from props during edit. Does NOT touch IFC."""
+    obj = context.active_object
+    if obj and self.is_editing:
+        _get_updater("mep", "regenerate_duct_segment_mesh_from_props")(obj)
+
+
 class BIMModelProperties(PropertyGroup):
     ifc_class: bpy.props.EnumProperty(items=get_ifc_class, name="Construction Class", update=update_ifc_class)
     relating_type_id: bpy.props.EnumProperty(
@@ -340,6 +369,19 @@ class BIMModelProperties(PropertyGroup):
         default=False,
         update=update_slab_direction_decorator,
     )
+    show_paths: bpy.props.BoolProperty(
+        name="Show Paths",
+        default=False,
+        update=update_paths_decorator,
+        description=(
+            "Trace the connected element path from the selected element. For "
+            "walls, follows IfcRelConnectsPathElements and draws each "
+            "connected wall's reference axis with endpoint dots. For MEP "
+            "elements, follows IfcRelConnectsPorts and draws each segment's "
+            "axis plus a port-to-port spider for each fitting. Toggle off to "
+            "skip the BFS traversal entirely."
+        ),
+    )
 
     prev_transform_orientation_slot_type: bpy.props.StringProperty(name="Previous Gizmo Orientation Type")
     prev_show_gizmo_object_translate: bpy.props.BoolProperty(name="Previous Gizmo Translate")
@@ -387,6 +429,7 @@ class BIMModelProperties(PropertyGroup):
         offset: float
         show_wall_axis: bool
         show_slab_direction: bool
+        show_paths: bool
 
         prev_transform_orientation_slot_type: str
         prev_show_gizmo_object_translate: bool
@@ -397,8 +440,13 @@ class BIMModelProperties(PropertyGroup):
 
 
 class BIMArrayProperties(PropertyGroup):
-    is_editing: bpy.props.IntProperty(
-        default=-1, description="Currently edited array index. -1 if not in array editing mode."
+    is_editing: bpy.props.BoolProperty(
+        default=False,
+        description="True while an array layer is in parametric edit mode. The specific layer is in editing_item_index.",
+    )
+    editing_item_index: bpy.props.IntProperty(
+        default=-1,
+        description="Index of the array layer currently being edited; -1 when not in edit mode.",
     )
     count: bpy.props.IntProperty(name="Count", default=0, min=0)
     x: bpy.props.FloatProperty(name="X", default=0, subtype="DISTANCE")
@@ -414,6 +462,15 @@ class BIMArrayProperties(PropertyGroup):
         name="Method",
         default="OFFSET",
     )
+    per_child_opening: bpy.props.BoolProperty(
+        name="Per-Child Opening",
+        description=(
+            "When the array parent fills a wall (or any voidable host), give each array child its own opening + "
+            "filling pair so the host is cut once per child. Disable to leave the host uncut by the children — "
+            "only the parent's original opening remains"
+        ),
+        default=True,
+    )
     relating_array_object: bpy.props.PointerProperty(
         type=bpy.types.Object,
         name="Copy Array Properties",
@@ -422,13 +479,15 @@ class BIMArrayProperties(PropertyGroup):
     )
 
     if TYPE_CHECKING:
-        is_editing: int
+        is_editing: bool
+        editing_item_index: int
         count: int
         x: float
         y: float
         z: float
         use_local_space: bool
         method: Literal["OFFSET", "DISTRIBUTE"]
+        per_child_opening: bool
         sync_children: bool
         relating_array_object: Union[bpy.types.Object, None]
 
@@ -1659,6 +1718,21 @@ class BIMRoofProperties(PropertyGroup):
             setattr(target_props, prop_name, prop_value)
 
 
+class BIMSlabProperties(PropertyGroup):
+    """Transient state for the slab disconnect-access gizmo.
+
+    ``is_editing`` flips True when the user clicks the pen icon on a slab
+    that has wall connections — gating the per-wall disconnect icons in
+    ``GizmoSlabUnjoinWalls`` so they're hidden until the user opts in. No
+    IFC draft state lives here: the disconnect operator commits directly,
+    so this PropertyGroup carries only the UI gate."""
+
+    is_editing: bpy.props.BoolProperty(name="Slab Edit Active", default=False, options={"SKIP_SAVE"})
+
+    if TYPE_CHECKING:
+        is_editing: bool
+
+
 class BIMWallProperties(PropertyGroup):
     """Transient draft state for parametric wall gizmo editing.
 
@@ -1904,6 +1978,155 @@ class BIMExternalParametricGeometryProperties(bpy.types.PropertyGroup):
         sverchok_nodes: Union[sverchok.node_tree.SverchCustomTree, None]
 
 
+class BIMPipeSegmentProperties(PropertyGroup):
+    """Transient draft state for parametric pipe-segment gizmo editing."""
+
+    is_editing: bpy.props.BoolProperty(
+        default=False,
+        description="True while pipe-segment parametric edit mode is active.",
+    )
+    mesh_dirty: bpy.props.BoolProperty(
+        default=False,
+        options={"HIDDEN", "SKIP_SAVE"},
+        description=(
+            "True while the visible mesh is the preview shape; cleared once the "
+            "real IFC-derived geometry is restored (on commit or cancel)."
+        ),
+    )
+    length: bpy.props.FloatProperty(
+        name="Length",
+        default=1.0,
+        min=0.01,
+        subtype="DISTANCE",
+        update=update_pipe_segment,
+        description="Pipe-segment extrusion length (preview value; committed on finish).",
+    )
+    snap_length: bpy.props.FloatProperty(
+        description="Snapshot of length at edit-enable; commit skips no-op writes.",
+    )
+    snap_object_scale_z: bpy.props.FloatProperty(
+        default=1.0,
+        description=(
+            "Snapshot of obj.scale.z at edit-enable. Cancel / no-op-finish restore "
+            "this exact value so a user's non-identity pre-edit scale isn't silently "
+            "zeroed by the scale-based preview."
+        ),
+    )
+
+    if TYPE_CHECKING:
+        is_editing: bool
+        mesh_dirty: bool
+        length: float
+        snap_length: float
+        snap_object_scale_z: float
+
+
+class BIMDuctSegmentProperties(PropertyGroup):
+    """Transient draft state for parametric duct-segment gizmo editing."""
+
+    is_editing: bpy.props.BoolProperty(
+        default=False,
+        description="True while duct-segment parametric edit mode is active.",
+    )
+    mesh_dirty: bpy.props.BoolProperty(
+        default=False,
+        options={"HIDDEN", "SKIP_SAVE"},
+        description=(
+            "True while the visible mesh is the preview shape; cleared once the "
+            "real IFC-derived geometry is restored (on commit or cancel)."
+        ),
+    )
+    length: bpy.props.FloatProperty(
+        name="Length",
+        default=1.0,
+        min=0.01,
+        subtype="DISTANCE",
+        update=update_duct_segment,
+        description="Duct-segment extrusion length (preview value; committed on finish).",
+    )
+    snap_length: bpy.props.FloatProperty(
+        description="Snapshot of length at edit-enable; commit skips no-op writes.",
+    )
+    snap_object_scale_z: bpy.props.FloatProperty(
+        default=1.0,
+        description=(
+            "Snapshot of obj.scale.z at edit-enable. Cancel / no-op-finish restore "
+            "this exact value so a user's non-identity pre-edit scale isn't silently "
+            "zeroed by the scale-based preview."
+        ),
+    )
+
+    if TYPE_CHECKING:
+        is_editing: bool
+        mesh_dirty: bool
+        length: float
+        snap_length: float
+        snap_object_scale_z: float
+
+
+class BIMBendPreviewProperties(PropertyGroup):
+    """Scene-level pending state for the bend-creation preview flow.
+
+    Scene-level (not per-object) because the bend involves two segments by
+    IFC id — neither alone owns the draft."""
+
+    is_active: bpy.props.BoolProperty(
+        default=False,
+        options={"SKIP_SAVE"},
+        description="True while the bend-creation preview flow is active.",
+    )
+    start_segment_id: bpy.props.IntProperty(
+        default=0,
+        options={"SKIP_SAVE"},
+        description="IFC element id of the start (active) segment.",
+    )
+    end_segment_id: bpy.props.IntProperty(
+        default=0,
+        options={"SKIP_SAVE"},
+        description="IFC element id of the end (other selected) segment.",
+    )
+    start_length: bpy.props.FloatProperty(
+        name="Start Length",
+        default=0.1,
+        min=0.001,
+        subtype="DISTANCE",
+        description="Length of the bend fitting's tangent leg on the start (active) segment side",
+    )
+    end_length: bpy.props.FloatProperty(
+        name="End Length",
+        default=0.1,
+        min=0.001,
+        subtype="DISTANCE",
+        description="Length of the bend fitting's tangent leg on the end (other) segment side",
+    )
+    radius: bpy.props.FloatProperty(
+        name="Radius",
+        default=0.2,
+        min=0.001,
+        subtype="DISTANCE",
+        description="Inner radius of the bend curve",
+    )
+    editing_bend_id: bpy.props.IntProperty(
+        default=0,
+        options={"SKIP_SAVE"},
+        description=(
+            "IFC element id of an existing bend fitting being re-edited "
+            "(non-zero only on the pen-icon re-edit flow). The create "
+            "operator deletes this bend + its port connections before "
+            "recreating with the new parameters."
+        ),
+    )
+
+    if TYPE_CHECKING:
+        is_active: bool
+        start_segment_id: int
+        end_segment_id: int
+        start_length: float
+        end_length: float
+        radius: float
+        editing_bend_id: int
+
+
 class BIMWallFilletPreviewProperties(PropertyGroup):
     """Scene-level pending state for the wall-fillet preview flow.
 
@@ -1960,7 +2183,29 @@ class BIMWallFilletPreviewProperties(PropertyGroup):
 class BIMPreviewProperties(PropertyGroup):
     """Umbrella for parametric-edit preview drafts attached to ``Scene``."""
 
+    bend: bpy.props.PointerProperty(type=BIMBendPreviewProperties)
     wall_fillet: bpy.props.PointerProperty(type=BIMWallFilletPreviewProperties)
 
     if TYPE_CHECKING:
+        bend: BIMBendPreviewProperties
         wall_fillet: BIMWallFilletPreviewProperties
+
+
+class BIMParametricEditDialogPrefs(PropertyGroup):
+    """Session-scoped flag for the parametric-edit pen-icon dispatcher.
+
+    Attached to ``WindowManager`` so the state lives for one Blender session
+    and resets on restart — the right scope for "don't show this again for
+    this session" toggles."""
+
+    suppress_shared_rep_warning: bpy.props.BoolProperty(
+        name="Suppress shared-representation warning",
+        description=(
+            "When true, the pen-icon dispatcher skips the shared-geometry "
+            "confirmation dialog. Resets on Blender restart."
+        ),
+        default=False,
+    )
+
+    if TYPE_CHECKING:
+        suppress_shared_rep_warning: bool

src/bonsai/bonsai/bim/module/model/railing.py

@@ -18,6 +18,7 @@
 
 
 import json
+import math
 from typing import Any
 
 import bmesh
@@ -27,14 +28,24 @@ import ifcopenshell.api.geometry
 import ifcopenshell.api.pset
 import ifcopenshell.util.representation
 import ifcopenshell.util.unit
-from mathutils import Vector
+from mathutils import Matrix, Vector
 
 import bonsai.core.geometry
 import bonsai.core.root
 import bonsai.tool as tool
+from bonsai.bim.module.drawing import gizmos as gizmo
+from bonsai.bim.module.drawing.gizmos import DimensionGizmoConfig
+from bonsai.bim.module.model import prop
 from bonsai.bim.module.model.data import RailingData, refresh
 from bonsai.bim.module.model.decorator import ProfileDecorator
-from bonsai.bim.parametric_lifecycle import PathPreservingEditMixin
+from bonsai.bim.parametric_lifecycle import (
+    CycleTypeMixin,
+    PathPreservingEditMixin,
+    PickTypeMixin,
+)
+from bonsai.tool.cad import WELD_TOLERANCE
+
+V_ = tool.Blender.V_
 
 # reference:
 # https://ifc43-docs.standards.buildingsmart.org/IFC/RELEASE/IFC4x3/HTML/lexical/IfcRailing.htm
@@ -125,6 +136,56 @@ def update_bbim_railing_pset(element: ifcopenshell.entity_instance, railing_data
     ifcopenshell.api.pset.edit_pset(tool.Ifc.get(), pset=pset, properties={"Data": railing_data})
 
 
+def generate_wall_mounted_handrail_preview(
+    obj: bpy.types.Object,
+    props: "prop.BIMRailingProperties",
+    path_data: dict[str, Any],
+    si_conversion: float,
+) -> None:
+    """Viewport-only WALL_MOUNTED_HANDRAIL preview: rebuild ``obj.data`` from the same
+    geometry helper the IFC representation builder uses, without writing any IFC."""
+    railing_path = [Vector(v) * si_conversion for v in path_data["verts"]]
+    looped_path = path_data["edges"][-1][-1] == path_data["edges"][0][0]
+
+    geom = ifcopenshell.api.geometry.compute_wall_mounted_handrail_geometry(
+        railing_path=railing_path,
+        support_spacing=props.support_spacing,
+        railing_diameter=props.railing_diameter,
+        clear_width=props.clear_width,
+        height=props.height,
+        use_manual_supports=props.use_manual_supports,
+        terminal_type=props.terminal_type,
+        looped_path=looped_path,
+        unit_scale=1.0,  # props are already SI; bypass the IFC project-units conversion
+    )
+
+    bm = tool.Blender.get_bmesh_for_mesh(obj.data, clean=True)
+
+    tool.Cad.sweep_disk_along_polyline(
+        bm,
+        [Vector(p) for p in geom.handrail_polyline],
+        geom.handrail_radius,
+        arc_indices=geom.handrail_arc_point_indices,
+    )
+
+    for support in geom.supports:
+        tool.Cad.sweep_disk_along_polyline(
+            bm,
+            [Vector(p) for p in support.arc_polyline],
+            support.arc_radius,
+        )
+        tool.Cad.add_disk_extrusion(
+            bm,
+            Vector(support.disk_position),
+            support.disk_radius,
+            support.disk_depth,
+            support.disk_z_rotation,
+        )
+
+    bmesh.ops.recalc_face_normals(bm, faces=bm.faces[:])
+    tool.Blender.apply_bmesh(obj.data, bm)
+
+
 def update_railing_modifier_bmesh(context: bpy.types.Context) -> None:
     """before using should make sure that Data contains up-to-date information.
     If BBIM Pset just changed should call refresh() before updating bmesh
@@ -140,6 +201,13 @@ def update_railing_modifier_bmesh(context: bpy.types.Context) -> None:
     path_data = RailingData.data["path_data"]
 
     si_conversion = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
+
+    # WALL_MOUNTED_HANDRAIL renders the preview from the compute helper; IFC stays
+    # untouched until Finish Editing rebuilds the representation.
+    if not props.is_editing_path and props.railing_type == "WALL_MOUNTED_HANDRAIL":
+        generate_wall_mounted_handrail_preview(obj, props, path_data, si_conversion)
+        return
+
     # need to make sure we support edit mode
     # since users will probably be in edit mode when they'll be changing railing path
     bm = tool.Blender.get_bmesh_for_mesh(obj.data, clean=True)
@@ -165,8 +233,6 @@ def update_railing_modifier_bmesh(context: bpy.types.Context) -> None:
         thickness = props.thickness
         spacing = props.spacing
 
-        # spacing
-        # split each edge in 3 segments by 0.5 * spacing by x-y plane
         main_edges = bm.edges[:]
         for main_edge in main_edges:
             bm_split_edge_at_offset(main_edge, spacing)
@@ -211,7 +277,7 @@ def update_railing_modifier_bmesh(context: bpy.types.Context) -> None:
         bmesh.ops.dissolve_edges(bm, edges=edges_to_dissolve)
         bmesh.ops.dissolve_verts(bm, verts=verts_to_dissolve)
         # to remove unnecessary verts in 0 spacing case
-        bmesh.ops.remove_doubles(bm, verts=bm.verts, dist=0.0001)
+        bmesh.ops.remove_doubles(bm, verts=bm.verts, dist=WELD_TOLERANCE)
 
         bmesh.ops.recalc_face_normals(bm, faces=bm.faces[:])
 
@@ -271,8 +337,8 @@ def get_path_data(obj: bpy.types.Object) -> dict[str, Any]:
             segments.append((i - 1, 0))
             break
 
-        # skip path verts if they just go vertical to avoid errors
-        if (v.co.xy - prev_v.co.xy).length <= 0.0001:
+        # Vertical-only segments project to a degenerate XY edge; skip to avoid divide-by-zero downstream.
+        if (v.co.xy - prev_v.co.xy).length <= WELD_TOLERANCE:
             continue
 
         points.append(v.co)
@@ -407,15 +473,14 @@ class CopyRailingParameters(bpy.types.Operator, tool.Ifc.Operator):
 
 
 class _RailingEditMixin(PathPreservingEditMixin):
-    """Type-specific hooks for railing parametric-edit operators. Single-object
-    (active_object). ``path_data`` is preserved through the edit; the separate
-    ``Enable/Finish/CancelEditingRailingPath`` operators handle path editing."""
+    """Single-object (active_object) railing-edit hooks; path_data is preserved
+    through the edit (path editing is a separate operator family)."""
 
     pset_name = "BBIM_Railing"
 
     @classmethod
     def _is_element_type(cls, element):
-        return tool.Blender.Modifier.is_railing(element)
+        return tool.Parametric.is_railing(element)
 
     @classmethod
     def _get_props(cls, obj: bpy.types.Object):
@@ -436,7 +501,21 @@ class _RailingEditMixin(PathPreservingEditMixin):
         update_railing_modifier_ifc_data(context)
 
     @classmethod
-    def _update_modifier_bmesh(cls, obj: bpy.types.Object, context: bpy.types.Context) -> None:
+    def _restore_viewport_after_cancel(cls, obj: bpy.types.Object, context: bpy.types.Context) -> None:
+        """WALL_MOUNTED_HANDRAIL reloads the committed Body; others rebuild the preview bmesh."""
+        props = tool.Model.get_railing_props(obj)
+        if props.railing_type == "WALL_MOUNTED_HANDRAIL":
+            element = tool.Ifc.get_entity(obj)
+            assert element
+            body = ifcopenshell.util.representation.get_representation(element, "Model", "Body", "MODEL_VIEW")
+            if body:
+                bonsai.core.geometry.switch_representation(
+                    tool.Ifc,
+                    tool.Geometry,
+                    obj=obj,
+                    representation=body,
+                )
+            return
         update_railing_modifier_bmesh(context)
 
 
@@ -467,6 +546,556 @@ class FinishEditingRailing(_RailingEditMixin, bpy.types.Operator, tool.Ifc.Opera
         return self._finish_targets(context)
 
 
+class CycleRailingType(bpy.types.Operator, tool.Ifc.Operator, CycleTypeMixin):
+    """Cycle railing_type (FRAMELESS_PANEL ↔ WALL_MOUNTED_HANDRAIL). Shift+click reverses."""
+
+    bl_idname = "bim.cycle_railing_type"
+    bl_label = "Cycle Railing Type"
+    bl_options = {"REGISTER", "UNDO"}
+
+    element_checker = tool.Parametric.is_railing
+    props_getter = tool.Model.get_railing_props
+    type_literal = tool.Model.RailingType
+    type_attr = "railing_type"
+
+    def _execute(self, context: bpy.types.Context) -> set[str]:
+        return self._cycle_type(context)
+
+
+class ToggleRailingUseManualSupports(bpy.types.Operator):
+    """Flip use_manual_supports on the active WALL_MOUNTED_HANDRAIL railing.
+
+    No-op unless a parametric edit is active and the railing is wall-mounted.
+    """
+
+    bl_idname = "bim.toggle_railing_use_manual_supports"
+    bl_label = "Toggle Railing Manual Supports"
+    bl_description = "Switch between automatic support spacing and manual per-vertex placement"
+    bl_options = {"REGISTER", "UNDO"}
+
+    def execute(self, context):
+        resolved = tool.Model.resolve_active_props_for_edit(
+            context,
+            tool.Model.get_railing_props,
+            subtype=("railing_type", "WALL_MOUNTED_HANDRAIL"),
+        )
+        if resolved is None:
+            return {"CANCELLED"}
+        _obj, props = resolved
+        props.use_manual_supports = not props.use_manual_supports
+        return {"FINISHED"}
+
+
+class PickRailingTerminalType(bpy.types.Operator, tool.Ifc.Operator, PickTypeMixin):
+    """Pick ``terminal_type`` for the active WALL_MOUNTED_HANDRAIL railing."""
+
+    bl_idname = "bim.pick_railing_terminal_type"
+    bl_label = "Pick Railing Terminal Type"
+    bl_description = "Pick the cap geometry applied at the rail ends"
+    bl_options = {"REGISTER", "UNDO"}
+
+    skip_element_check = True
+    props_getter = tool.Model.get_railing_props
+    type_literal = prop.CapType
+    type_attr = "terminal_type"
+
+    def _execute(self, context: bpy.types.Context) -> set[str]:
+        if (
+            tool.Model.resolve_active_props_for_edit(
+                context,
+                tool.Model.get_railing_props,
+                subtype=("railing_type", "WALL_MOUNTED_HANDRAIL"),
+            )
+            is None
+        ):
+            return {"CANCELLED"}
+        return self._pick_type(context)
+
+
+def _format_attr_distance(attr_name: str):
+    """text_formatter that renders the named property as a distance, ignoring the
+    dimension's visible-length argument (which is fixed for schematic gizmos)."""
+    return lambda p, _v: tool.Unit.format_distance(getattr(p, attr_name))
+
+
+class GizmoRailingSchematic(bpy.types.GizmoGroup, gizmo.BaseSchematicGizmoGroup):
+    """Schematic-frame parametric editor for railings. Mutually exclusive with path-edit mode."""
+
+    bl_idname = "OBJECT_GGT_bim_railing_edition"
+    bl_label = "Railing Editing Gizmo"
+    bl_space_type = "VIEW_3D"
+    bl_region_type = "WINDOW"
+    bl_options = {"3D", "PERSISTENT"}
+
+    enable_editing_operator = "bim.enable_editing_railing"
+    finish_editing_operator = "bim.finish_editing_railing"
+    cancel_editing_operator = "bim.cancel_editing_railing"
+    cycle_type_operator = "bim.cycle_railing_type"
+
+    props_getter = tool.Model.get_railing_props
+    gizmo_pref_name = "railing"
+
+    # Schematic-local layout. +X → screen RIGHT, +Y → screen UP, +Z → toward viewer
+    # (post billboard rotation). Each dimension is anchored alongside the feature it
+    # measures so the label, not the bar length, carries the value.
+    SCHEMATIC_MESH_HEIGHT_FRAC = 0.9  # Mesh top edge in schematic-local +Y
+    SCHEMATIC_MESH_WIDTH_FRAC = 0.7  # Mesh side edges in schematic-local ±X
+    SCHEMATIC_MESH_RAIL_Y_FRAC = SCHEMATIC_MESH_HEIGHT_FRAC / 2  # WALL_MOUNTED_HANDRAIL rail centreline
+    SCHEMATIC_MESH_DEPTH_FRAC = 0.06  # Panel depth — small so the schematic reads as slabs not boxes
+    # WALL_MOUNTED_HANDRAIL dimensions — fractions of schematic_box_size so they
+    # scale with the host group's box size.
+    SCHEMATIC_RAIL_RADIUS_FRAC = 0.05
+    SCHEMATIC_RAIL_CLEAR_FRAC = 0.5  # Stylised — wider than real-world for visible bracket arm
+    SCHEMATIC_RAIL_INSET_FRAC = 0.08  # Wall extends past the outermost support on both sides
+
+    @classmethod
+    def schematic_rail_radius(cls) -> float:
+        return cls.schematic_box_size * cls.SCHEMATIC_RAIL_RADIUS_FRAC
+
+    @classmethod
+    def schematic_rail_clear(cls) -> float:
+        return cls.schematic_box_size * cls.SCHEMATIC_RAIL_CLEAR_FRAC
+
+    # Axonometric 3/4 view: +Z projects down-and-left so the depth axis
+    # is visibly separated from the back face. Without the X tilt, panel
+    # thickness (schematic-local Z) collapses to a near-horizontal bar.
+    schematic_view_rotation = Matrix.Rotation(math.radians(20), 4, "X") @ Matrix.Rotation(math.radians(-25), 4, "Y")
+
+    # Hover a dimension → highlight the schematic edges tagged with the matching feature.
+    # Tags are written by the mesh builders. "spacing" is empty space (no edges) so it's
+    # absent from this map and gracefully no-ops on hover.
+    schematic_attr_to_feature = {
+        "height": "panel_height",
+        "thickness": "panel_thickness",
+        "railing_diameter": "rail_tube",
+        "clear_width": "bracket",
+        "support_spacing": "bracket",
+    }
+
+    schematic_dimension_props = [
+        # ── FRAMELESS_PANEL ─────────────────────────────────────────────
+        DimensionGizmoConfig(
+            attr_name="height",
+            axis=(0, 1, 0),
+            min_value=0.01,
+            # Gated to FRAMELESS_PANEL: in WALL_MOUNTED_HANDRAIL, height only
+            # feeds TO_FLOOR / TO_END_POST_AND_FLOOR terminals so dragging it
+            # is a no-op under the default "180" terminal.
+            visibility_condition=lambda p: p.railing_type == "FRAMELESS_PANEL",
+            matrix_position=lambda p: Vector((-GizmoRailingSchematic.SCHEMATIC_MESH_WIDTH_FRAC / 2 - 0.08, 0.0, 0.0)),
+            schematic_visible_length=SCHEMATIC_MESH_HEIGHT_FRAC,
+            text_formatter=_format_attr_distance("height"),
+        ),
+        DimensionGizmoConfig(
+            attr_name="thickness",
+            axis=(0, 0, 1),  # panel depth — projects to a true depth direction under the 3/4 tilt
+            min_value=0.005,
+            visibility_condition=lambda p: p.railing_type == "FRAMELESS_PANEL",
+            matrix_position=lambda p: Vector(
+                (
+                    (
+                        -GizmoRailingSchematic.SCHEMATIC_MESH_WIDTH_FRAC / 2
+                        - GizmoRailingSchematic.SCHEMATIC_MESH_GAP_HALF_WIDTH
+                    )
+                    / 2,
+                    GizmoRailingSchematic.SCHEMATIC_MESH_HEIGHT_FRAC + 0.05,
+                    -GizmoRailingSchematic.SCHEMATIC_MESH_DEPTH_FRAC / 2,
+                )
+            ),
+            schematic_visible_length=0.4,  # longer than default to survive depth foreshortening
+            text_formatter=_format_attr_distance("thickness"),
+        ),
+        DimensionGizmoConfig(
+            attr_name="spacing",
+            axis=(1, 0, 0),
+            min_value=0.0,  # zero-spacing collapses the picket gap into a single continuous panel
+            visibility_condition=lambda p: p.railing_type == "FRAMELESS_PANEL",
+            matrix_position=lambda p: Vector((0.0, -0.1, 0.0)),
+            text_formatter=_format_attr_distance("spacing"),
+        ),
+        # ── WALL_MOUNTED_HANDRAIL ──────────────────────────────────────
+        DimensionGizmoConfig(
+            attr_name="railing_diameter",
+            axis=(0, 1, 0),
+            min_value=0.001,
+            visibility_condition=lambda p: p.railing_type == "WALL_MOUNTED_HANDRAIL",
+            matrix_position=lambda p: Vector(
+                (
+                    -GizmoRailingSchematic.SCHEMATIC_MESH_WIDTH_FRAC / 2 - 0.05,
+                    GizmoRailingSchematic.SCHEMATIC_MESH_RAIL_Y_FRAC - 0.09,
+                    GizmoRailingSchematic.schematic_rail_clear(),
+                )
+            ),
+            text_formatter=_format_attr_distance("railing_diameter"),
+        ),
+        DimensionGizmoConfig(
+            attr_name="clear_width",
+            axis=(0, 0, 1),  # +Z is the wall-to-rail perpendicular axis under the 3/4 tilt
+            min_value=0.001,
+            visibility_condition=lambda p: p.railing_type == "WALL_MOUNTED_HANDRAIL",
+            matrix_position=lambda p: Vector(
+                (
+                    0.0,
+                    GizmoRailingSchematic.SCHEMATIC_MESH_RAIL_Y_FRAC,
+                    0.0,
+                )
+            ),
+            schematic_visible_length=0.36,  # 2× default so the call-out survives depth projection
+            text_formatter=_format_attr_distance("clear_width"),
+        ),
+        DimensionGizmoConfig(
+            attr_name="support_spacing",
+            axis=(1, 0, 0),
+            min_value=0.05,
+            visibility_condition=lambda p: (p.railing_type == "WALL_MOUNTED_HANDRAIL" and not p.use_manual_supports),
+            matrix_position=lambda p: Vector(
+                (
+                    -GizmoRailingSchematic.SCHEMATIC_MESH_WIDTH_FRAC / 2
+                    + GizmoRailingSchematic.SCHEMATIC_RAIL_INSET_FRAC,
+                    -0.18,
+                    0.0,
+                )
+            ),
+            # Bare names (not Gizmo…SCHEMATIC_…) because the class is still under construction here.
+            schematic_visible_length=SCHEMATIC_MESH_WIDTH_FRAC - 2 * SCHEMATIC_RAIL_INSET_FRAC,
+            text_formatter=_format_attr_distance("support_spacing"),
+        ),
+    ]
+
+    @classmethod
+    def is_element_type(cls, element: ifcopenshell.entity_instance) -> bool:
+        return tool.Parametric.is_railing(element)
+
+    @classmethod
+    def schematic_cache_key(cls, props) -> tuple:
+        """Cache the schematic mesh by ``railing_type`` — proportions are fixed
+        per type, so the bmesh build runs at most twice across a session
+        (once for ``FRAMELESS_PANEL``, once for ``WALL_MOUNTED_HANDRAIL``)
+        rather than once per draw call."""
+        return (props.railing_type,)
+
+    def setup_element_specific_gizmos(self, context: bpy.types.Context) -> None:
+        """Create the WALL_MOUNTED_HANDRAIL-only affordances on the schematic.
+
+        Two static lock glyphs (open/closed) for toggling
+        ``use_manual_supports``: instantiate both and let the per-frame state
+        query pick which one to show. State-aware icons use a static pair
+        rather than a single dynamic gizmo to avoid ``prop_path`` resolution
+        in the render path.
+
+        Plus a cycle-glyph at the rail end that opens the ``terminal_type``
+        popup when clicked.
+        """
+        default_color, highlight_color = self.get_decoration_colors()
+
+        self.lock_open_gizmo, self.lock_closed_gizmo = self.create_icon_gizmo_lock_pair(
+            "bim.toggle_railing_use_manual_supports",
+            open_color=default_color,
+        )
+
+        self.terminal_gizmo = self.gizmos.new("VIEW3D_GT_menu")
+        self.terminal_gizmo.color = default_color
+        self.terminal_gizmo.color_highlight = highlight_color
+        self.terminal_gizmo.use_draw_scale = False
+        self.terminal_gizmo.alpha = 0.8
+        self.terminal_gizmo.target_set_operator("bim.pick_railing_terminal_type")
+
+    def _refresh_element_specific(self, context: bpy.types.Context, mw: "Matrix", props) -> None:
+        """Position and gate the WALL_MOUNTED_HANDRAIL-only gizmos.
+
+        - Lock glyphs: only WALL_MOUNTED_HANDRAIL while editing. Show
+          ``lock_open`` when ``use_manual_supports`` is True, the closed
+          padlock when False ("auto-spacing is locked to support_spacing").
+        - Terminal gizmo: same gating, positioned just past the right rail
+          end so it reads as "configure the rail's end cap".
+        """
+        super()._refresh_element_specific(context, mw, props)
+
+        # ``draw_prepare`` can fire on a freshly recreated GizmoGroup instance
+        # before ``setup_element_specific_gizmos`` has populated the lock /
+        # terminal attributes (Blender 5.x recreates per-region groups on
+        # reload). Bail out cheaply; the next refresh after setup completes
+        # will reposition them correctly.
+        if not hasattr(self, "lock_open_gizmo"):
+            return
+
+        # Single gate for all WALL_MOUNTED_HANDRAIL extras.
+        active = props.is_editing and not props.is_editing_path and props.railing_type == "WALL_MOUNTED_HANDRAIL"
+
+        if not active:
+            self.lock_open_gizmo.hide = True
+            self.lock_closed_gizmo.hide = True
+            self.terminal_gizmo.hide = True
+            return
+
+        billboard_rot = self._frame_billboard_rot
+        view_rotation = self.schematic_view_rotation
+        anchor = self._compute_schematic_anchor(props, mw, billboard_rot)
+
+        # ── Lock glyphs for use_manual_supports ──────────────────────────
+        # Sit just above the wall's bottom line, near the centre of the
+        # schematic — visually grouped with the dimension it controls
+        # (support_spacing) without overlapping the arrow tail below.
+        is_manual = bool(props.use_manual_supports)
+        self.lock_open_gizmo.hide = not is_manual
+        self.lock_closed_gizmo.hide = is_manual
+        lock_local = Vector((0.0, 0.05, 0.0))
+        lock_world = anchor + billboard_rot @ view_rotation @ lock_local
+        lock_matrix = gizmo.billboarded_at(lock_world, billboard_rot, 0.09)
+        self.lock_open_gizmo.matrix_basis = lock_matrix
+        self.lock_closed_gizmo.matrix_basis = lock_matrix
+
+        # ── Terminal-type popup gizmo at the right rail end ──────────────
+        # Pushed well past the right wall edge so the icon doesn't crowd
+        # the wall outline or the bracket attach point. At rail height and
+        # rail depth so it reads as "attached to the rail terminal".
+        self.terminal_gizmo.hide = False
+        terminal_local = Vector(
+            (
+                self.SCHEMATIC_MESH_WIDTH_FRAC / 2 + 0.25,
+                self.SCHEMATIC_MESH_RAIL_Y_FRAC,
+                self.schematic_rail_clear(),
+            )
+        )
+        terminal_world = anchor + billboard_rot @ view_rotation @ terminal_local
+        self.terminal_gizmo.matrix_basis = gizmo.billboarded_at(terminal_world, billboard_rot, 0.18)
+
+    def update_editing_gizmos(
+        self, context: bpy.types.Context, mw: "Matrix", props: "prop.BIMRailingProperties"
+    ) -> None:
+        """Hide the pen gizmo while polyline path-edit is active; reposition the cycle icon.
+
+        The base class shows the pen gizmo whenever ``is_editing`` is False,
+        which is the case during path-edit too. Allowing the user to click
+        through into parametric edit while the polyline mesh is open in EDIT
+        mode mixes two distinct editing states and leaves a stale draft if
+        they cancel out — block the entry point instead. The operator itself
+        is intentionally not guarded (callers via scripting can still invoke
+        it); this is the UX-level enforcement.
+
+        The cycle icon defaults to the editing icon row (next to validate /
+        cancel) via the parent's positioning. We move it to just above the
+        schematic mesh so it reads as "cycle the railing type *shown here*"
+        — associated with the preview the user is interacting with, not a
+        generic editing button at the bottom of the schematic.
+        """
+        super().update_editing_gizmos(context, mw, props)
+        if props.is_editing_path:
+            self.pen_gizmo.hide = True
+
+        if props.is_editing and not props.is_editing_path:
+            billboard_rot = self._frame_billboard_rot
+            view_rotation = self.schematic_view_rotation
+            anchor = self._compute_schematic_anchor(props, mw, billboard_rot)
+            # Comfortably above the mesh top edge so the icon doesn't crowd
+            # the ``thickness`` / ``clear_width`` dimension callouts that
+            # already sit just above the panel/wall.
+            cycle_local = Vector((0.0, self.SCHEMATIC_MESH_HEIGHT_FRAC + 0.25, 0.0))
+            world_pos = anchor + billboard_rot @ view_rotation @ cycle_local
+            # 30% smaller than the editing-icon-row default (0.30 → 0.21):
+            # the cycle is a tertiary affordance compared to pen/validate/cancel.
+            self.cycle_gizmo.matrix_basis = gizmo.billboarded_at(world_pos, billboard_rot, 0.21)
+
+    @classmethod
+    def build_schematic_mesh(cls, props) -> "bmesh.types.BMesh":
+        """Build a wireframe preview of the railing in schematic-local coordinates.
+
+        FRAMELESS_PANEL renders as a box whose proportions track the bound
+        properties (height / thickness / spacing); WALL_MOUNTED_HANDRAIL
+        renders as a horizontal tube with two L-shaped supports whose
+        proportions track railing_diameter / clear_width / support_spacing.
+        Both are scaled to fit inside ``[-schematic_box_size, +schematic_box_size]``
+        on each axis so the schematic reads the same regardless of absolute
+        property values.
+
+        The mesh is decorative — clicks land on the labeled sliders, not on
+        the preview geometry. See ``BaseSchematicGizmoGroup`` for the
+        draw-handler lifecycle.
+        """
+        bm = bmesh.new()
+        if props.railing_type == "FRAMELESS_PANEL":
+            cls._build_frameless_panel_schematic(bm, props)
+        else:
+            cls._build_wall_mounted_handrail_schematic(bm, props)
+        return bm
+
+    # Schematic-local half-width of the visible gap between the two panel boxes.
+    # Conveys the "spacing" semantic at a glance — the user sees two pickets
+    # separated by air, with the spacing dimension emerging from that gap.
+    SCHEMATIC_MESH_GAP_HALF_WIDTH = 0.05
+
+    @classmethod
+    def _build_frameless_panel_schematic(cls, bm: "bmesh.types.BMesh", props) -> None:
+        """Stylised panel: two wireframe boxes with a visible gap between them.
+
+        The box edges sit at the ``SCHEMATIC_MESH_*_FRAC`` positions
+        (matching where the dimension gizmos anchor), so each dimension line
+        visually starts at the geometry feature it measures. Internal
+        proportions are stable across drags — the actual values are shown
+        through the dimension labels, while the schematic communicates
+        which feature each label refers to. The gap between the two boxes
+        (set by ``SCHEMATIC_MESH_GAP_HALF_WIDTH``) gives the "spacing"
+        dimension a real visual referent.
+
+        Edges are tagged on a string layer so hover-highlight can colour
+        the geometric feature being measured: vertical edges → height,
+        depth edges → thickness. The X-aligned edges along the panel
+        width are untagged (they don't correspond to a single dimension).
+        """
+        hw = cls.SCHEMATIC_MESH_WIDTH_FRAC / 2
+        hd = cls.SCHEMATIC_MESH_DEPTH_FRAC / 2
+        h_top = cls.SCHEMATIC_MESH_HEIGHT_FRAC
+        gap = cls.SCHEMATIC_MESH_GAP_HALF_WIDTH
+
+        layer_name = cls.SCHEMATIC_FEATURE_LAYER_NAME
+        feat_layer = bm.edges.layers.string.get(layer_name) or bm.edges.layers.string.new(layer_name)
+
+        # Edge index → feature tag for one box. Order matches the (a, b)
+        # tuple order below: bottom ring (4) + top ring (4) + verticals (4).
+        edge_tags_per_box = (
+            b"",  # (0,1) bottom-back, X-aligned
+            b"panel_thickness",  # (1,2) bottom-right, Z-aligned
+            b"",  # (2,3) bottom-front, X-aligned
+            b"panel_thickness",  # (3,0) bottom-left, Z-aligned
+            b"",  # (4,5) top-back, X-aligned
+            b"panel_thickness",  # (5,6) top-right, Z-aligned
+            b"",  # (6,7) top-front, X-aligned
+            b"panel_thickness",  # (7,4) top-left, Z-aligned
+            b"panel_height",  # (0,4) vertical back-left
+            b"panel_height",  # (1,5) vertical back-right
+            b"panel_height",  # (2,6) vertical front-right
+            b"panel_height",  # (3,7) vertical front-left
+        )
+
+        # Build two separate wireframe boxes — one on each side of the central
+        # gap. The boxes share the same Y range (0..h_top) and Z range (±hd)
+        # but split the X range so the gap from -gap to +gap stays empty.
+        for x_left, x_right in ((-hw, -gap), (gap, hw)):
+            corners = [
+                bm.verts.new((x_left, 0.0, -hd)),
+                bm.verts.new((x_right, 0.0, -hd)),
+                bm.verts.new((x_right, 0.0, hd)),
+                bm.verts.new((x_left, 0.0, hd)),
+                bm.verts.new((x_left, h_top, -hd)),
+                bm.verts.new((x_right, h_top, -hd)),
+                bm.verts.new((x_right, h_top, hd)),
+                bm.verts.new((x_left, h_top, hd)),
+            ]
+            for tag, (a, b) in zip(
+                edge_tags_per_box,
+                (
+                    (0, 1),
+                    (1, 2),
+                    (2, 3),
+                    (3, 0),  # bottom ring
+                    (4, 5),
+                    (5, 6),
+                    (6, 7),
+                    (7, 4),  # top ring
+                    (0, 4),
+                    (1, 5),
+                    (2, 6),
+                    (3, 7),  # vertical edges
+                ),
+            ):
+                edge = bm.edges.new((corners[a], corners[b]))
+                if tag:
+                    edge[feat_layer] = tag
+
+    @classmethod
+    def _build_wall_mounted_handrail_schematic(cls, bm: "bmesh.types.BMesh", props) -> None:
+        """Stylised wall-mounted handrail: wall outline, hex tube, two L-brackets.
+
+        Three visual elements convey "rail mounted on a wall":
+
+        - **Wall outline** — a wireframe rectangle in the YZ plane at ``z=0``,
+          extending slightly past the rail ends so the wall reads as a
+          surface the rail is *attached to* rather than a coincident frame.
+        - **Handrail tube** — a hexagonal cross-section extruded along ±X
+          at ``z=+clear_s`` (in front of the wall), at ``y=rail_y``.
+        - **L-shaped brackets** at each rail end — from the rail centreline
+          drop a short distance, then run perpendicular back to the wall
+          plane. Mirrors the standard wall-mount bracket geometry: a
+          horizontal arm holding the rail off the wall, a vertical drop
+          attaching to the rail.
+
+        Like ``_build_frameless_panel_schematic``, the schematic uses fixed
+        proportions so the dimension gizmos' anchor points stay aligned
+        with the geometry features regardless of property values.
+        """
+        half_len = cls.SCHEMATIC_MESH_WIDTH_FRAC / 2
+        wall_top = cls.SCHEMATIC_MESH_HEIGHT_FRAC
+        rail_y = cls.SCHEMATIC_MESH_RAIL_Y_FRAC  # rail sits at half wall height
+        radius_s = cls.schematic_rail_radius()
+        clear_s = cls.schematic_rail_clear()
+
+        layer_name = cls.SCHEMATIC_FEATURE_LAYER_NAME
+        feat_layer = bm.edges.layers.string.get(layer_name) or bm.edges.layers.string.new(layer_name)
+
+        # ── Wall outline (rectangle at z=0, slightly wider than the rail) ──
+        # Spans the full schematic height; the rail attaches in the middle,
+        # so the wall reads as "continuing past the rail above and below".
+        # Wall edges stay untagged — they're background context, not a
+        # feature any dimension measures.
+        wall_extra = 0.08
+        wall_x_left = -half_len - wall_extra
+        wall_x_right = half_len + wall_extra
+        wall_corners = [
+            bm.verts.new((wall_x_left, 0.0, 0.0)),
+            bm.verts.new((wall_x_right, 0.0, 0.0)),
+            bm.verts.new((wall_x_right, wall_top, 0.0)),
+            bm.verts.new((wall_x_left, wall_top, 0.0)),
+        ]
+        for a, b in ((0, 1), (1, 2), (2, 3), (3, 0)):
+            bm.edges.new((wall_corners[a], wall_corners[b]))
+
+        # ── Handrail tube (hex cross-section in YZ, extruded along X) ──────
+        # Centred on the rail centreline at (±(half_len - rail_inset),
+        # rail_y, +clear_s) — in front of the wall plane at z=0. The tube
+        # is shorter than the wall so the wall visibly extends past it on
+        # both sides; the L-brackets sit at the tube ends, so the leftmost
+        # bracket no longer coincides with the wall's left edge.
+        rail_inset = cls.SCHEMATIC_RAIL_INSET_FRAC
+        rail_x_left = -half_len + rail_inset
+        rail_x_right = half_len - rail_inset
+        segments = 6
+        ring_left, ring_right = [], []
+        for i in range(segments):
+            theta = 2 * math.pi * i / segments
+            dy = math.cos(theta) * radius_s
+            dz = math.sin(theta) * radius_s
+            ring_left.append(bm.verts.new((rail_x_left, rail_y + dy, clear_s + dz)))
+            ring_right.append(bm.verts.new((rail_x_right, rail_y + dy, clear_s + dz)))
+        # All hex-tube edges tagged "rail_tube" so they highlight together
+        # when the railing_diameter dimension is hovered.
+        for i in range(segments):
+            j = (i + 1) % segments
+            e_left = bm.edges.new((ring_left[i], ring_left[j]))
+            e_right = bm.edges.new((ring_right[i], ring_right[j]))
+            e_axial = bm.edges.new((ring_left[i], ring_right[i]))
+            e_left[feat_layer] = b"rail_tube"
+            e_right[feat_layer] = b"rail_tube"
+            e_axial[feat_layer] = b"rail_tube"
+
+        # ── L-brackets at each rail end (rail → drop → wall) ───────────────
+        # Bracket attach points follow the rail ends, so they're pulled
+        # inward by ``rail_inset`` from the wall edges. From the rail
+        # centreline, drop ``bracket_drop`` in Y, then run perpendicular
+        # back to the wall plane (z=0). The L shape reads as a wall-mount
+        # bracket under the 3/4 tilt. Both bracket segments tagged
+        # "bracket" so they highlight when clear_width OR support_spacing
+        # is hovered (both dimensions measure features of the supports).
+        bracket_drop = 0.06
+        for x in (rail_x_left, rail_x_right):
+            v_rail = bm.verts.new((x, rail_y, clear_s))
+            v_corner = bm.verts.new((x, rail_y - bracket_drop, clear_s))
+            v_wall = bm.verts.new((x, rail_y - bracket_drop, 0.0))
+            e1 = bm.edges.new((v_rail, v_corner))
+            e2 = bm.edges.new((v_corner, v_wall))
+            e1[feat_layer] = b"bracket"
+            e2[feat_layer] = b"bracket"
+
+
 class FlipRailingPathOrder(bpy.types.Operator, tool.Ifc.Operator):
     bl_idname = "bim.flip_railing_path_order"
     bl_label = "Flip Railing Path Order"
@@ -510,6 +1139,16 @@ class EnableEditingRailingPath(bpy.types.Operator, tool.Ifc.Operator):
         [o.select_set(False) for o in context.selected_objects if o != obj]
         assert obj
         props = tool.Model.get_railing_props(obj)
+
+        # Auto-commit any in-progress parametric draft before switching to
+        # path-edit. ``set_props_kwargs_from_ifc_data`` a few lines below
+        # overwrites props with the pset's stored values — without committing
+        # first, anything the user dragged on a dimension gizmo (height,
+        # diameter, …) would be silently discarded the moment path-edit
+        # starts.
+        if props.is_editing:
+            tool.Parametric.commit_object_draft(obj, "bim.finish_editing_railing")
+
         data = tool.Model.get_modeling_bbim_pset_data(obj, "BBIM_Railing")["data_dict"]
         # required since we could load pset from .ifc and BIMRoofProperties won't be set
         props.set_props_kwargs_from_ifc_data(data)

src/bonsai/bonsai/bim/module/model/roof.py

@@ -17,8 +17,8 @@
 # along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
 
 import json
-from math import cos, pi, radians, tan
-from typing import Any, Literal, Union
+from math import atan2, cos, degrees, pi, radians, tan
+from typing import Any, ClassVar, Literal, Union
 
 import bmesh
 import bpy
@@ -32,9 +32,11 @@ from mathutils import Quaternion, Vector
 
 import bonsai.core.root
 import bonsai.tool as tool
+from bonsai.bim.module.drawing import gizmos as gizmo
+from bonsai.bim.module.drawing.gizmos import DimensionGizmoConfig, IconSlot
 from bonsai.bim.module.model.data import RoofData, refresh
 from bonsai.bim.module.model.decorator import ProfileDecorator
-from bonsai.bim.parametric_lifecycle import PathPreservingEditMixin
+from bonsai.bim.parametric_lifecycle import CycleTypeMixin, PathPreservingEditMixin
 
 # reference:
 # https://ifc43-docs.standards.buildingsmart.org/IFC/RELEASE/IFC4x3/HTML/lexical/IfcRoof.htm
@@ -211,7 +213,13 @@ def generate_hipped_roof_bmesh(
 
     new_verts = [bm.verts.new(v) for v in verts]
     new_edges = [bm.edges.new([new_verts[vi] for vi in edge]) for edge in edges]
-    new_faces = [bm.faces.new([new_verts[vi] for vi in face]) for face in faces]
+    # Skip degenerate faces. ``bpypolyskel.polygonize`` can emit a face whose
+    # vertex list contains the same index twice on certain footprint /
+    # slope combinations (the straight-skeleton collapses two ridge events
+    # onto the same vertex). ``bm.faces.new`` rejects those with
+    # ``found the same (BMVert) used multiple times``; dropping them keeps
+    # the rest of the roof intact instead of aborting the whole rebuild.
+    new_faces = [bm.faces.new([new_verts[vi] for vi in face]) for face in faces if len(set(face)) == len(face)]
 
     if mode == "HEIGHT":  # Calculate the angle we ended up with.
         new_faces[0].normal_update()
@@ -397,6 +405,11 @@ def generate_hipped_roof_bmesh(
         if is_internal:
             faces_to_delete.add(face)
     bmesh.ops.delete(bm, geom=list(faces_to_delete), context="FACES")
+    # Final pass: ``remove_doubles`` + internal-face deletion above can leave
+    # the bottom slab faces flipped at low slopes, where the kernel's
+    # "outward" inference becomes ambiguous on near-flat geometry. Recompute
+    # once more on the final topology so the eave plane points down.
+    bmesh.ops.recalc_face_normals(bm, faces=bm.faces[:])
     return bm
 
 
@@ -618,7 +631,7 @@ class _RoofEditMixin(PathPreservingEditMixin):
 
     @classmethod
     def _is_element_type(cls, element):
-        return tool.Blender.Modifier.is_roof(element)
+        return tool.Parametric.is_roof(element)
 
     @classmethod
     def _get_props(cls, obj: bpy.types.Object):
@@ -636,32 +649,142 @@ class _RoofEditMixin(PathPreservingEditMixin):
     def _update_modifier_bmesh(cls, obj: bpy.types.Object, context: bpy.types.Context) -> None:
         update_roof_modifier_bmesh(obj)
 
+    @classmethod
+    def _restore_viewport_after_cancel(cls, obj: bpy.types.Object, context: bpy.types.Context) -> None:
+        """Rebuild the roof bmesh from the just-restored draft props so the
+        viewport reverts to the pre-edit geometry. Same helper the modal
+        edits use, just driven by the cancelled props instead of in-flight
+        drag values."""
+        update_roof_modifier_bmesh(obj)
 
-class EnableEditingRoof(_RoofEditMixin, bpy.types.Operator, tool.Ifc.Operator):
-    bl_idname = "bim.enable_editing_roof"
-    bl_label = "Enable Editing Roof"
+
+EnableEditingRoof, FinishEditingRoof, CancelEditingRoof = tool.Parametric.build_edit_lifecycle(
+    "roof",
+    _RoofEditMixin,
+    labels=(
+        ("Enable Editing Roof", ""),
+        ("Finish Editing Roof", ""),
+        ("Cancel Editing Roof", ""),
+    ),
+    module_name=__name__,
+)
+
+
+# Fixed horizontal run for the slope gizmo: the draggable value is the
+# vertical rise at this distance from the anchor, in the rise/run convention.
+_ROOF_SLOPE_REFERENCE_RUN = 1.0
+# One degree shy of vertical; avoids tan() blow-up when the user drags the
+# rise handle past the gizmo's anchor.
+_ROOF_MAX_SLOPE_ANGLE = pi / 2 - 0.001
+
+
+def _roof_has_openings() -> bool:
+    """``visible_when`` predicate for the toggle_openings idle slot. True iff
+    the active object's IFC element exposes a non-empty HasOpenings inverse."""
+    obj = bpy.context.active_object
+    if obj is None:
+        return False
+    element = tool.Ifc.get_entity(obj)
+    if element is None:
+        return False
+    return tool.Geometry.has_openings(element)
+
+
+class CycleRoofGenerationMethod(bpy.types.Operator, tool.Ifc.Operator, CycleTypeMixin):
+    """Cycle the roof generation method (HEIGHT ↔ ANGLE). Shift+click cycles in reverse."""
+
+    bl_idname = "bim.cycle_roof_generation_method"
+    bl_label = "Cycle Roof Generation Method"
     bl_options = {"REGISTER", "UNDO"}
 
-    def _execute(self, context):
-        return self._enable_targets(context)
+    element_checker = tool.Parametric.is_roof
+    props_getter = tool.Model.get_roof_props
+    type_literal = tool.Model.RoofGenerationMethod
+    type_attr = "generation_method"
+
+    def _execute(self, context: bpy.types.Context) -> set[str]:
+        return self._cycle_type(context)
 
 
-class CancelEditingRoof(_RoofEditMixin, bpy.types.Operator, tool.Ifc.Operator):
-    bl_idname = "bim.cancel_editing_roof"
-    bl_label = "Cancel Editing Roof"
-    bl_options = {"REGISTER", "UNDO"}
+class GizmoRoofEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
+    bl_idname = "OBJECT_GGT_bim_roof_edition"
+    bl_label = "Roof Editing Gizmo"
+    bl_space_type = "VIEW_3D"
+    bl_region_type = "WINDOW"
+    bl_options = {"3D", "PERSISTENT"}
 
-    def _execute(self, context):
-        return self._cancel_targets(context)
+    enable_editing_operator = "bim.enable_editing_roof"
+    finish_editing_operator = "bim.finish_editing_roof"
+    cancel_editing_operator = "bim.cancel_editing_roof"
+    cycle_type_operator = "bim.cycle_roof_generation_method"
 
+    # Positions for all three dimensions are set per-frame by the position
+    # override below; no static ``matrix_position`` is needed.
+    dimension_gizmo_props = [
+        DimensionGizmoConfig(
+            attr_name="height",
+            axis=(0, 0, 1),
+            min_value=0.01,
+            visibility_condition=lambda p: p.generation_method == "HEIGHT",
+        ),
+        DimensionGizmoConfig(
+            attr_name="angle",
+            axis=(0, 0, 1),
+            prop_name="Slope",
+            min_value=0.0,
+            visibility_condition=lambda p: p.generation_method == "ANGLE",
+            compute_value=lambda p: tan(p.angle) * _ROOF_SLOPE_REFERENCE_RUN,
+            apply_value=lambda p, rise: setattr(
+                p, "angle", min(_ROOF_MAX_SLOPE_ANGLE, max(0.0, atan2(rise, _ROOF_SLOPE_REFERENCE_RUN)))
+            ),
+            text_formatter=lambda p, rise: (f"{tool.Unit.format_distance(rise)} ({degrees(p.angle):.1f}°)"),
+        ),
+        DimensionGizmoConfig(
+            attr_name="roof_thickness",
+            axis=(0, 0, -1),
+            min_value=0.001,
+            # The line shows the perpendicular slab thickness (matching the
+            # pset value and the drag delta); the true vertical span is
+            # ``roof_thickness / cos(angle)``, longer than what is drawn.
+        ),
+    ]
 
-class FinishEditingRoof(_RoofEditMixin, bpy.types.Operator, tool.Ifc.Operator):
-    bl_idname = "bim.finish_editing_roof"
-    bl_label = "Finish Editing Roof"
-    bl_options = {"REGISTER", "UNDO"}
+    props_getter = tool.Model.get_roof_props
+    gizmo_pref_name = "roof"
 
-    def _execute(self, context):
-        return self._finish_targets(context)
+    idle_slots: ClassVar[tuple[IconSlot, ...]] = (
+        IconSlot(
+            name="toggle_openings",
+            gizmo_idname="VIEW3D_GT_add_opening",
+            operator="bim.toggle_host_openings",
+            visible_when=lambda gg: _roof_has_openings(),
+        ),
+    )
+
+    @classmethod
+    def is_element_type(cls, element: ifcopenshell.entity_instance) -> bool:
+        return tool.Parametric.is_roof(element)
+
+    def _update_dimension_gizmo_positions(self, context: bpy.types.Context, mw, props) -> None:  # noqa: ARG002
+        """Anchor every dimension gizmo at the object origin. Each gizmo's
+        declared axis (height/slope along +Z, thickness along -Z) separates
+        them in 3D so they don't visually collide despite sharing a
+        position; the height + slope gizmos themselves are mutually
+        exclusive via ``visibility_condition`` on ``generation_method``."""
+        origin = Vector((0.0, 0.0, 0.0))
+        self.set_dimension_gizmo_position("height", mw, origin, (0, 0, 1))
+        self.set_dimension_gizmo_position("angle", mw, origin, (0, 0, 1))
+        self.set_dimension_gizmo_position("roof_thickness", mw, origin, (0, 0, -1))
+
+    def get_element_height(self, props) -> float:  # noqa: ARG002
+        """Object-local Z of the mesh's topmost vertex, so the pen / validate /
+        cancel / cycle row anchors visibly above sloped or stepped roof
+        bodies rather than at the parametric ``props.height`` which may not
+        match the rendered apex on ANGLE-generation roofs."""
+        obj = bpy.context.active_object
+        if obj is None or not getattr(obj, "bound_box", None):
+            return 1.0
+        return max(c[2] for c in obj.bound_box)
 
 
 class EnableEditingRoofPath(bpy.types.Operator, tool.Ifc.Operator):

src/bonsai/bonsai/bim/module/model/slab.py

@@ -271,7 +271,7 @@ class DumbSlabPlaner:
                 # For instances, a 30 degrees angled extrusion with positive direction has the same extrusion direction as a
                 # -150 degrees angled extrusion with negative direction. The difference lies in the object's rotation.
                 # This means that things can get messy if the user changes the object x angle somehow. We have to figure out an alternative approach.
-                existing_x_angle = obj.rotation_euler.x
+                existing_x_angle = tool.Model.get_existing_x_angle(extrusion)
                 existing_x_angle = 0 if tool.Cad.is_x(existing_x_angle, 0, tolerance=0.001) else existing_x_angle
                 existing_x_angle = 0 if tool.Cad.is_x(existing_x_angle, pi, tolerance=0.001) else existing_x_angle
                 existing_x_angle = 0 if tool.Cad.is_x(existing_x_angle, 2 * pi, tolerance=0.001) else existing_x_angle
@@ -620,6 +620,14 @@ class EnableEditingExtrusionProfile(bpy.types.Operator, tool.Ifc.Operator):
     def _execute(self, context):
         self.unit_scale = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
         obj = context.active_object
+
+        # Commit any in-progress parametric (gizmo) draft on this object
+        # before switching to profile-edit. Otherwise the in-memory draft
+        # state is overwritten when the profile mesh is imported below,
+        # silently discarding the user's pending dimension edits.
+        if feature := tool.Parametric.is_object_editing(obj):
+            tool.Parametric.commit_object_draft(obj, feature.finish_op)
+
         element = tool.Ifc.get_entity(obj)
 
         body = ifcopenshell.util.representation.get_representation(element, "Model", "Body", "MODEL_VIEW")
@@ -991,3 +999,74 @@ class RecalculateSlab(bpy.types.Operator, tool.Ifc.Operator):
 
         tool.Model.recalculate_walls(walls)
         return {"FINISHED"}
+
+
+class EnableEditingSlab(bpy.types.Operator, tool.Ifc.Operator):
+    """Open the slab disconnect-access mode. Pure UI toggle: flips
+    ``obj.BIMSlabProperties.is_editing`` so the per-wall disconnect
+    gizmos surface on the slab. ``tool.Ifc.Operator`` base because the
+    parametric framework's universal dispatcher routes through
+    ``tool.Parametric.run_bim_op``, which only accepts that subclass for
+    undo-safe lifecycle. No IFC mutation."""
+
+    bl_idname = "bim.enable_editing_slab"
+    bl_label = "Edit Slab Connections"
+    bl_description = "Show disconnect icons for every wall clipped to this slab"
+    bl_options = {"REGISTER", "UNDO"}
+
+    @classmethod
+    def poll(cls, context):
+        obj = context.active_object
+        if obj is None:
+            return False
+        element = tool.Ifc.get_entity(obj)
+        return element is not None and element.is_a("IfcSlab")
+
+    def _execute(self, context):
+        context.active_object.BIMSlabProperties.is_editing = True
+        return {"FINISHED"}
+
+
+class CancelEditingSlab(bpy.types.Operator, tool.Ifc.Operator):
+    """Close the slab disconnect-access mode."""
+
+    bl_idname = "bim.cancel_editing_slab"
+    bl_label = "Close Slab Edit"
+    bl_description = "Hide the slab disconnect icons"
+    bl_options = {"REGISTER", "UNDO"}
+
+    @classmethod
+    def poll(cls, context):
+        obj = context.active_object
+        if obj is None:
+            return False
+        element = tool.Ifc.get_entity(obj)
+        return element is not None and element.is_a("IfcSlab")
+
+    def _execute(self, context):
+        context.active_object.BIMSlabProperties.is_editing = False
+        return {"FINISHED"}
+
+
+class FinishEditingSlab(bpy.types.Operator, tool.Ifc.Operator):
+    """Close the slab disconnect-access mode. Same body as Cancel — slab
+    edit is a pure UI gate with no IFC draft to commit; the framework
+    requires both ``bim.finish_editing_<name>`` and
+    ``bim.cancel_editing_<name>`` to exist by name convention."""
+
+    bl_idname = "bim.finish_editing_slab"
+    bl_label = "Finish Slab Edit"
+    bl_description = "Hide the slab disconnect icons"
+    bl_options = {"REGISTER", "UNDO"}
+
+    @classmethod
+    def poll(cls, context):
+        obj = context.active_object
+        if obj is None:
+            return False
+        element = tool.Ifc.get_entity(obj)
+        return element is not None and element.is_a("IfcSlab")
+
+    def _execute(self, context):
+        context.active_object.BIMSlabProperties.is_editing = False
+        return {"FINISHED"}

src/bonsai/bonsai/bim/module/model/stair.py

@@ -31,7 +31,13 @@ from mathutils import Matrix, Vector
 import bonsai.core.root
 import bonsai.tool as tool
 from bonsai.bim.module.drawing import gizmos as gizmo
-from bonsai.bim.module.drawing.gizmos import DimensionGizmoConfig
+from bonsai.bim.module.drawing.gizmos import (
+    COLOR_GREEN,
+    COLOR_RED,
+    DimensionGizmoConfig,
+    IconSlot,
+)
+from bonsai.bim.parametric_lifecycle import IntegerInputDialogMixin, PickTypeMixin
 from bonsai.tool.numeric_input import (
     IntegerInputState,
     run_integer_input_modal,
@@ -39,7 +45,7 @@ from bonsai.tool.numeric_input import (
 )
 
 V_ = tool.Blender.V_
-from typing import TYPE_CHECKING
+from typing import TYPE_CHECKING, ClassVar
 
 from bmesh.types import BMVert
 from bpy.props import IntProperty
@@ -378,6 +384,20 @@ class AdjustStairTreads(bpy.types.Operator):
         return {"FINISHED"}
 
 
+class InputStairTreads(IntegerInputDialogMixin, bpy.types.Operator):
+    """Popup-dialog entry point for typing a new ``number_of_treads`` value.
+    Bound to the world-space ``xN`` count label in the stair edit row."""
+
+    bl_idname = "bim.input_stair_treads"
+    bl_label = "Set Number of Treads"
+    bl_description = "Type the number of treads for this stair"
+    bl_options = {"REGISTER", "UNDO"}
+
+    number_of_treads: IntProperty(name="Number of Treads", default=1, min=1)
+    attr_name = "number_of_treads"
+    props_getter = staticmethod(tool.Model.get_stair_props)
+
+
 class SetStairTreads(bpy.types.Operator):
     """Set the number of treads to a specific value."""
 
@@ -423,11 +443,11 @@ class SetStairTreads(bpy.types.Operator):
         return f"Number of Treads: {input_str}_{validity}  |  Enter to confirm, Esc to cancel"
 
 
-class CycleStairType(bpy.types.Operator, gizmo.CycleTypeMixin):
-    """Cycle through stair types. Shift+click to cycle in reverse."""
+class PickStairType(bpy.types.Operator, PickTypeMixin):
+    """Pick a stair type from a popup menu."""
 
-    bl_idname = "bim.cycle_stair_type"
-    bl_label = "Cycle Stair Type"
+    bl_idname = "bim.pick_stair_type"
+    bl_label = "Pick Stair Type"
     bl_options = {"REGISTER", "UNDO"}
 
     props_getter = tool.Model.get_stair_props
@@ -436,7 +456,7 @@ class CycleStairType(bpy.types.Operator, gizmo.CycleTypeMixin):
     skip_element_check = True
 
     def execute(self, context: bpy.types.Context) -> set[str]:
-        return self._cycle_type(context)
+        return self._pick_type(context)
 
 
 # Tread run accessors - callbacks that delegate to BIMStairProperties methods
@@ -462,20 +482,47 @@ class GizmoStairEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
     bl_region_type = "WINDOW"
     bl_options = {"3D", "PERSISTENT"}
 
-    # === Stair-Specific Icon Layout (meters) ===
-    # Additional icons for stair editing, positioned after standard icons:
-    #   [Validate] [Cancel] [Cycle] [TreadLock] [Plus] [Minus]
-    ICON_TREAD_LOCK_X = 1.24  # X position for tread lock toggle icon
-    ICON_PLUS_X = 1.61  # X position for add tread (+) icon
-    ICON_MINUS_X = 1.98  # X position for remove tread (-) icon
+    # === Stair-Specific Icon Layout ===
+    # Row order: [Validate] [Cancel] [Cycle] [TreadLock] [xN] [Plus] [Minus]
+    # The base class assigns X positions from ``feature_slots`` tuple order —
+    # adding an icon is a one-line append, no hardcoded X constant.
     ICON_PLUS_MINUS_SCALE = 0.24  # Scale for plus/minus icons (slightly larger)
     ICON_CYCLE_SCALE = 0.3  # Scale for cycle type icon
+    ICON_COUNT_LABEL_SCALE = 0.36  # Scale for the xN tread-count label
     ICON_Z_OFFSET = 0.5  # Z offset above geometry for editing icons
 
+    feature_slots: ClassVar[tuple[IconSlot, ...]] = (
+        IconSlot(
+            name="tread_lock",
+            gizmo_idname="VIEW3D_GT_lock",
+            variants=("open", "closed"),
+            operator="bim.toggle_stair_property",
+            color=(1.0, 1.0, 1.0),
+            operator_props=(("property_name", "custom_tread_lock"),),
+        ),
+        IconSlot(name="tread_count_label", placeholder=True),
+        IconSlot(
+            name="plus",
+            gizmo_idname="VIEW3D_GT_plus",
+            operator="bim.adjust_stair_treads",
+            scale=ICON_PLUS_MINUS_SCALE,
+            color=COLOR_GREEN,
+            operator_props=(("increment", 1),),
+        ),
+        IconSlot(
+            name="minus",
+            gizmo_idname="VIEW3D_GT_minus",
+            operator="bim.adjust_stair_treads",
+            scale=ICON_PLUS_MINUS_SCALE,
+            color=COLOR_RED,
+            operator_props=(("increment", -1),),
+        ),
+    )
+
     enable_editing_operator = "bim.enable_editing_stair"
     finish_editing_operator = "bim.finish_editing_stair"
     cancel_editing_operator = "bim.cancel_editing_stair"
-    cycle_type_operator = "bim.cycle_stair_type"
+    pick_type_operator = "bim.pick_stair_type"
 
     def get_icon_y_extent(self, props: "BIMStairProperties") -> tuple[float, float]:
         """Get Y extents for stair icon positioning.
@@ -585,28 +632,31 @@ class GizmoStairEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
 
     @classmethod
     def is_element_type(cls, element: ifcopenshell.entity_instance) -> bool:
-        return tool.Blender.Modifier.is_stair(element)
+        return tool.Parametric.is_stair(element)
 
     def setup_element_specific_gizmos(self, context: bpy.types.Context) -> None:
-        """Create stair-specific icon gizmos (lock, plus, minus)."""
-        self.lock_gizmo = self.create_icon_gizmo(
-            "VIEW3D_GT_lock",
-            self.COLOR_BLUE,
+        """Create the total-length lock as an open/closed pair plus the
+        ``xN`` tread-count label. Lock click toggles
+        ``props.total_length_lock``; the per-frame update hook picks which
+        member is visible. Anchored to the stair's far X end (not the edit
+        row) so it's positioned by ``_update_lock_gizmo_position`` rather
+        than the toolbar slot system.
+
+        The count label binds to ``bim.input_stair_treads`` (popup dialog)
+        for click-to-type input and sits at the X reserved by the
+        ``tread_count_label`` placeholder slot in ``feature_slots``."""
+        self.total_length_lock_open_gizmo, self.total_length_lock_closed_gizmo = self.create_icon_gizmo_lock_pair(
             "bim.toggle_stair_property",
+            self.COLOR_BLUE,
             property_name="total_length_lock",
         )
-        self.tread_lock_gizmo = self.create_icon_gizmo(
-            "VIEW3D_GT_lock",
-            (1.0, 1.0, 1.0),
-            "bim.toggle_stair_property",
-            property_name="custom_tread_lock",
-        )
-        self.plus_gizmo = self.create_icon_gizmo(
-            "VIEW3D_GT_plus", self.COLOR_GREEN, "bim.adjust_stair_treads", increment=1
-        )
-        self.minus_gizmo = self.create_icon_gizmo(
-            "VIEW3D_GT_minus", self.COLOR_RED, "bim.adjust_stair_treads", increment=-1
-        )
+        default_color, highlight_color = self.get_decoration_colors()
+        self.tread_count_label_gizmo = self.gizmos.new("BIM_GT_count_label")
+        self.tread_count_label_gizmo.use_draw_scale = False
+        self.tread_count_label_gizmo.color = default_color
+        self.tread_count_label_gizmo.color_highlight = highlight_color
+        self.tread_count_label_gizmo.alpha = 0.8
+        self.tread_count_label_gizmo.target_set_operator("bim.input_stair_treads")
 
     def _refresh_element_specific(
         self, context: bpy.types.Context, mw: Matrix, props: "BIMStairProperties"  # noqa: ARG002
@@ -618,30 +668,43 @@ class GizmoStairEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
         self.update_tread_count_gizmos(props)
 
     def update_lock_gizmo(self, props: "BIMStairProperties") -> None:
-        """Update lock gizmo color and visibility. Positioning is handled
-        per-frame by the dimension-positioning hook."""
-        gizmo_prefs = self.get_gizmo_prefs()
-        if not self.update_gizmo_visibility(self.lock_gizmo, props.is_editing, gizmo_prefs.lock):
-            return  # Hidden, skip color update
-        self.lock_gizmo.color = self.COLOR_RED if props.total_length_lock else self.COLOR_GREEN
+        """Show the open/closed total-length lock variant matching
+        ``props.total_length_lock``. Positioning is handled per-frame by
+        the dimension-positioning hook."""
+        if not hasattr(self, "total_length_lock_open_gizmo"):
+            return
+        if not props.is_editing:
+            self.total_length_lock_open_gizmo.hide = True
+            self.total_length_lock_closed_gizmo.hide = True
+            return
+        self.total_length_lock_open_gizmo.hide = props.total_length_lock
+        self.total_length_lock_closed_gizmo.hide = not props.total_length_lock
 
     def update_tread_lock_gizmo(self, props: "BIMStairProperties") -> None:
-        """Update visibility of tread lock gizmo. Positioning is handled in _update_editing_icon_positions."""
-        if not hasattr(self, "tread_lock_gizmo"):
+        """Show the open/closed lock variant matching ``props.custom_tread_lock``.
+
+        Both pair members share an X position (set by the base's slot
+        positioning); this picks which one is visible per frame so a state
+        flip can't reveal both at once."""
+        if not hasattr(self, "tread_lock_open_gizmo"):
             return
-        gizmo_prefs = self.get_gizmo_prefs()
-        self.update_gizmo_visibility(self.tread_lock_gizmo, props.is_editing, gizmo_prefs.lock)
+        if not props.is_editing:
+            self.tread_lock_open_gizmo.hide = True
+            self.tread_lock_closed_gizmo.hide = True
+            return
+        self.tread_lock_open_gizmo.hide = props.custom_tread_lock
+        self.tread_lock_closed_gizmo.hide = not props.custom_tread_lock
 
     def update_tread_count_gizmos(self, props: "BIMStairProperties") -> None:
-        """Update visibility of +/- tread count gizmos. Positioning is handled in _update_editing_icon_positions."""
+        """Update visibility of the +/- tread count gizmos and the ``xN``
+        label. Positioning is handled in ``_update_editing_icon_positions``."""
         if not hasattr(self, "plus_gizmo") or not hasattr(self, "minus_gizmo"):
             return
-        gizmo_prefs = self.get_gizmo_prefs()
-        self.update_gizmo_visibility(self.plus_gizmo, props.is_editing, gizmo_prefs.plus)
+        self.update_gizmo_visibility(self.plus_gizmo, props.is_editing)
         # Minus has additional condition: number_of_treads > 1
-        self.update_gizmo_visibility(
-            self.minus_gizmo, props.is_editing and props.number_of_treads > 1, gizmo_prefs.minus
-        )
+        self.update_gizmo_visibility(self.minus_gizmo, props.is_editing and props.number_of_treads > 1)
+        if hasattr(self, "tread_count_label_gizmo"):
+            self.update_gizmo_visibility(self.tread_count_label_gizmo, props.is_editing)
 
     def _update_dimension_gizmo_positions(
         self, context: bpy.types.Context, mw: Matrix, props: "BIMStairProperties"  # noqa: ARG002
@@ -719,10 +782,12 @@ class GizmoStairEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
         billboard_rot: Matrix,
         total_run: float,
     ) -> None:
-        """Update lock gizmo position based on Y view direction."""
+        """Update lock gizmo pair position based on Y view direction. Writes
+        the matrix on both members so a state flip can't reveal a stale pose."""
         y_pos = self.get_y_position_for_view(props, viewing_from_negative_y, use_offset=True)
-        self.set_icon_gizmo_position(
-            "lock_gizmo",
+        self.set_icon_gizmo_pair_position(
+            "total_length_lock_open_gizmo",
+            "total_length_lock_closed_gizmo",
             mw,
             total_run + self.ICON_Z_OFFSET,
             y_pos,
@@ -734,30 +799,47 @@ class GizmoStairEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
     def _update_editing_icon_positions(
         self, mw: Matrix, props: "BIMStairProperties", viewing_from_negative_y: bool, billboard_rot: Matrix
     ) -> None:
-        """Update editing icon positions, flipping Y based on viewing angle."""
+        """Reposition the editing icons at stair's view-dependent Y. The base
+        class's update_editing_gizmos already placed them at the default
+        ``get_icon_y_offset`` Y — this overrides with the stair-specific
+        ``get_icon_y_for_view`` flip so the icons land on the side the
+        camera is looking from."""
         if not props.is_editing:
             return
 
         icon_z = props.height + self.ICON_Z_OFFSET
         y_pos = self.get_icon_y_for_view(props, viewing_from_negative_y)
+        slot_x = self._slot_x_positions()
 
         self.set_icon_gizmo_position("validate_gizmo", mw, 0, y_pos, icon_z, billboard_rot)
         self.set_icon_gizmo_position("cancel_gizmo", mw, self.ICON_CANCEL_X, y_pos, icon_z, billboard_rot)
         self.set_icon_gizmo_position(
             "cycle_gizmo", mw, self.ICON_CYCLE_X, y_pos, icon_z, billboard_rot, scale=self.ICON_CYCLE_SCALE
         )
-        self.set_icon_gizmo_position(
-            "tread_lock_gizmo",
+        self.set_icon_gizmo_pair_position(
+            "tread_lock_open_gizmo",
+            "tread_lock_closed_gizmo",
             mw,
-            self.ICON_TREAD_LOCK_X,
+            slot_x["tread_lock"],
             y_pos,
             icon_z - self.EDITING_ICON_SCALE / 2,
             billboard_rot,
             scale=self.EDITING_ICON_SCALE,
         )
         self.set_icon_gizmo_position(
-            "plus_gizmo", mw, self.ICON_PLUS_X, y_pos, icon_z, billboard_rot, scale=self.ICON_PLUS_MINUS_SCALE
+            "plus_gizmo", mw, slot_x["plus"], y_pos, icon_z, billboard_rot, scale=self.ICON_PLUS_MINUS_SCALE
         )
         self.set_icon_gizmo_position(
-            "minus_gizmo", mw, self.ICON_MINUS_X, y_pos, icon_z, billboard_rot, scale=self.ICON_PLUS_MINUS_SCALE
+            "minus_gizmo", mw, slot_x["minus"], y_pos, icon_z, billboard_rot, scale=self.ICON_PLUS_MINUS_SCALE
         )
+        if hasattr(self, "tread_count_label_gizmo"):
+            self.tread_count_label_gizmo.set_count(int(props.number_of_treads))
+            self.set_icon_gizmo_position(
+                "tread_count_label_gizmo",
+                mw,
+                slot_x["tread_count_label"],
+                y_pos,
+                icon_z,
+                billboard_rot,
+                scale=self.ICON_COUNT_LABEL_SCALE,
+            )

src/bonsai/bonsai/bim/module/model/ui.py

@@ -22,9 +22,9 @@ from collections.abc import Iterable
 from typing import TYPE_CHECKING, Any
 
 import bpy
+import ifcopenshell.util.unit
 from bpy.types import Panel
 
-import ifcopenshell.util.unit
 import bonsai.bim
 import bonsai.tool as tool
 from bonsai.bim.helper import prop_with_search
@@ -238,11 +238,11 @@ class BIM_PT_array(bpy.types.Panel):
 
             for i, array in enumerate(ArrayData.data["parameters"]["data_dict"]):
                 box = self.layout.box()
-                if props.is_editing == i:
+                if props.editing_item_index == i:
                     row = box.row(align=True)
                     row.prop(props, "count", icon="MOD_ARRAY")
-                    row.operator("bim.edit_array", icon="CHECKMARK", text="").item = i
-                    row.operator("bim.disable_editing_array", icon="CANCEL", text="")
+                    row.operator("bim.finish_editing_array", icon="CHECKMARK", text="")
+                    row.operator("bim.cancel_editing_array", icon="CANCEL", text="")
                     row = box.row(align=True)
                     row.prop(props, "method")
                     row = box.row(align=True)
@@ -365,7 +365,7 @@ class BIM_PT_wall(bpy.types.Panel):
         if not obj:
             return False
         element = tool.Ifc.get_entity(obj)
-        return bool(element) and tool.Blender.Modifier.is_wall(element)
+        return bool(element) and tool.Parametric.is_wall(element)
 
     def draw(self, context):
         obj = context.active_object

src/bonsai/bonsai/bim/module/model/wall_offset_gizmos.py

@@ -0,0 +1,279 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+"""Four wall-offset dimension gizmos (left / right / top / bottom) shared by door and
+window edit gizmo groups — both fillings sit in a LAYER2 wall and the offset math is
+identical.
+
+The compute side returns a *signed* value on the X axis (negative when the filling
+is 180°-flipped onto the wall's opposite face) so the gizmo framework auto-flips
+the rendered arrow; the apply side takes ``abs(value)`` because the user-facing
+offset is always positive. Z-axis values are unsigned in both directions.
+
+Fillings are assumed to align with the wall's local X axis to within ±90° — the
+parametric door/window construction path enforces this, and the X-sign math
+falls back to +1 if ``col[0].x`` lands on the ambiguous zero (filling rotated
+exactly 90° in the wall plane).
+
+Every public entry point falls back to a safe no-op when the host-wall chain
+cannot be resolved: reads return 0.0, writes do nothing, and gizmo anchors
+return a filling-relative position. This keeps the gizmos non-crashing when a
+filling momentarily loses its host (e.g. mid-edit, partially-loaded files).
+
+``_GEOM_CACHE`` is module-scoped and persists across tests — tests must call
+``clear_caches()`` between cases."""
+
+from __future__ import annotations
+
+from typing import TYPE_CHECKING, NamedTuple, Protocol
+
+from mathutils import Vector
+
+import bonsai.tool as tool
+from bonsai.bim.module.drawing.gizmos import DimensionGizmoConfig
+
+if TYPE_CHECKING:
+    import bpy
+
+
+class FillingProps(Protocol):
+    """Structural subset of door/window props this module touches."""
+
+    id_data: bpy.types.Object
+    overall_width: float
+    overall_height: float
+
+
+# Wall-local frame axis indices. Y (depth) is unused — fillings sit on the wall's centreline.
+_AXIS_X = 0
+_AXIS_Z = 2
+
+
+class _HostWallGeom(NamedTuple):
+    """Cached host-wall geometry in SI metres, wall-local frame. ``height`` is
+    the vertical projection (already accounts for slanted extrusions)."""
+
+    wall_obj: bpy.types.Object
+    height: float
+    axis_min_x: float
+    axis_max_x: float
+
+
+class _AxisExtent(NamedTuple):
+    """``[low, high]`` interval on one wall-local axis; low = near end.
+
+    ``x_sign`` is +1 / -1 for an X-axis filling extent only (carries the
+    180° auto-flip); always 1.0 elsewhere."""
+
+    low: float
+    high: float
+    x_sign: float = 1.0
+
+
+class _Edge(NamedTuple):
+    """Wall edge a gizmo measures to. ``is_max_end=True`` picks right/top, else left/bottom."""
+
+    axis_index: int
+    is_max_end: bool
+
+
+_LEFT = _Edge(axis_index=_AXIS_X, is_max_end=False)
+_RIGHT = _Edge(axis_index=_AXIS_X, is_max_end=True)
+_BOTTOM = _Edge(axis_index=_AXIS_Z, is_max_end=False)
+_TOP = _Edge(axis_index=_AXIS_Z, is_max_end=True)
+
+
+# Avoids repeating the host-wall chain walk + LAYER2 geometry read per gizmo per frame.
+_GEOM_CACHE = tool.Parametric.GenerationKeyedCache()
+
+
+def clear_caches() -> None:
+    _GEOM_CACHE.clear()
+
+
+def _host_wall_geom(filling_obj: bpy.types.Object) -> _HostWallGeom | None:
+    """Cached host-wall geometry for a filling, or ``None`` if any link in
+    filling → opening → wall → LAYER2 extrusion → scene-object resolution breaks."""
+    return _GEOM_CACHE.get_or_compute(filling_obj.name, lambda: _compute_host_wall_geom(filling_obj))
+
+
+def _compute_host_wall_geom(filling_obj: bpy.types.Object) -> _HostWallGeom | None:
+    element = tool.Ifc.get_entity(filling_obj)
+    if not element:
+        return None
+    host_wall = tool.Spatial.get_host_wall(element)
+    if not host_wall:
+        return None
+    wall_obj = tool.Ifc.get_object(host_wall)
+    length_height = tool.Wall.get_length_and_height(host_wall)
+    axis_extent = tool.Wall.get_axis_local_extent(host_wall)
+    # x_angle is None for non-LAYER2 walls — gates entry; the value itself is unused.
+    if not (wall_obj and length_height and axis_extent and tool.Wall.get_x_angle(host_wall) is not None):
+        return None
+    _, height = length_height
+    axis_min_x, axis_max_x = axis_extent
+    return _HostWallGeom(wall_obj=wall_obj, height=height, axis_min_x=axis_min_x, axis_max_x=axis_max_x)
+
+
+def _filling_axis_extent(props: FillingProps, host_wall_obj: bpy.types.Object, axis_index: int) -> _AxisExtent:
+    """Filling footprint on the wall's local axis.
+
+    X-axis extent carries the filling's orientation sign (180° flip onto
+    the opposite face) in ``x_sign``."""
+    filling_in_wall = host_wall_obj.matrix_world.inverted() @ props.id_data.matrix_world
+    origin = filling_in_wall.translation[axis_index]
+    if axis_index == _AXIS_X:
+        # col[0].x is the X-component of the filling's local X axis in the wall-local frame:
+        # +1 when filling's +X aligns with wall's +X, -1 after a 180° Z-flip.
+        x_sign = 1.0 if filling_in_wall.col[0].x >= 0.0 else -1.0
+        signed_width = x_sign * props.overall_width
+        return _AxisExtent(origin + min(0.0, signed_width), origin + max(0.0, signed_width), x_sign)
+    return _AxisExtent(origin, origin + props.overall_height)
+
+
+def _wall_axis_extent(geom: _HostWallGeom, axis_index: int) -> _AxisExtent:
+    """Wall span on one local axis: X = IFC axis-line endpoints (not mesh bound-box,
+    which drifts on trimmed walls); Z = 0 → wall height."""
+    if axis_index == _AXIS_X:
+        return _AxisExtent(geom.axis_min_x, geom.axis_max_x)
+    return _AxisExtent(0.0, geom.height)
+
+
+def _offset_from_extents(filling: _AxisExtent, wall: _AxisExtent, is_max_end: bool) -> float:
+    """Distance from the wall edge to the filling's matching edge on the same axis."""
+    if is_max_end:
+        return wall.high - filling.high
+    return filling.low - wall.low
+
+
+def _translate_along_wall_axis(
+    props: FillingProps, host_wall_obj: bpy.types.Object, delta: float, axis_index: int
+) -> None:
+    """Shift the filling by ``delta`` SI metres along the wall's local axis. Drag
+    operates in the filling's intent frame, not Blender's world frame, so a rotated
+    host wall still tracks correctly."""
+    if delta == 0.0:
+        return
+    direction_world = host_wall_obj.matrix_world.to_3x3().col[axis_index].normalized()
+    props.id_data.matrix_world.translation = props.id_data.matrix_world.translation + direction_world * delta
+
+
+def _get_offset(props: FillingProps, edge: _Edge) -> float:
+    """SI distance from the wall edge to the filling's matching edge on the same axis."""
+    geom = _host_wall_geom(props.id_data)
+    if not geom:
+        return 0.0
+    filling = _filling_axis_extent(props, geom.wall_obj, edge.axis_index)
+    wall = _wall_axis_extent(geom, edge.axis_index)
+    return _offset_from_extents(filling, wall, edge.is_max_end)
+
+
+def _set_offset(props: FillingProps, edge: _Edge, value: float) -> None:
+    """Translate the filling so its offset to ``edge`` becomes ``max(0, value)`` SI metres.
+    Max-end edges (right/top) translate in the opposite direction of near-end edges."""
+    geom = _host_wall_geom(props.id_data)
+    if not geom:
+        return
+    current = _get_offset(props, edge)
+    target = max(0.0, value)
+    delta = (current - target) if edge.is_max_end else (target - current)
+    _translate_along_wall_axis(props, geom.wall_obj, delta, edge.axis_index)
+
+
+def has_host_wall(props: FillingProps) -> bool:
+    """True when the filling resolves to a LAYER2 host wall present in the scene."""
+    return _host_wall_geom(props.id_data) is not None
+
+
+def _edge_position(props: FillingProps, edge: _Edge) -> Vector:
+    """Gizmo anchor in filling-local space, at the wall edge, pointing toward the filling."""
+    geom = _host_wall_geom(props.id_data)
+    if not geom:
+        if edge.axis_index == _AXIS_X:
+            return Vector((0.0, 0.0, props.overall_height / 2))
+        return Vector((props.overall_width / 2, 0.0, props.overall_height if edge.is_max_end else 0.0))
+    wall = _wall_axis_extent(geom, edge.axis_index)
+    edge_value = wall.high if edge.is_max_end else wall.low
+    if edge.axis_index == _AXIS_X:
+        wall_edge_world = geom.wall_obj.matrix_world @ Vector((edge_value, 0.0, 0.0))
+        pos = props.id_data.matrix_world.inverted() @ wall_edge_world
+        return Vector((pos.x, 0.0, props.overall_height / 2))
+    # LAYER2 wall matrix_world is upright, so wall-local Z and filling-local Z differ
+    # only by the filling's Z origin in the wall frame.
+    filling_z_in_wall = _filling_axis_extent(props, geom.wall_obj, axis_index=_AXIS_Z).low
+    return Vector((props.overall_width / 2, 0.0, edge_value - filling_z_in_wall))
+
+
+def _compute_value(props: FillingProps, edge: _Edge) -> float:
+    """Renderer-side value. X-axis edges return a signed value so the gizmo's
+    auto-flip kicks in for fillings on the wall's opposite face; Z-axis returns unsigned."""
+    geom = _host_wall_geom(props.id_data)
+    if not geom:
+        return 0.0
+    filling = _filling_axis_extent(props, geom.wall_obj, edge.axis_index)
+    wall = _wall_axis_extent(geom, edge.axis_index)
+    return filling.x_sign * _offset_from_extents(filling, wall, edge.is_max_end)
+
+
+def _apply_value(props: FillingProps, edge: _Edge, value: float) -> None:
+    """Drag-end commit; X-axis takes ``abs(value)`` since the negative sign in compute
+    is a rendering hint only (user-facing offset is always positive)."""
+    if edge.axis_index == _AXIS_X:
+        _set_offset(props, edge, abs(value))
+    else:
+        _set_offset(props, edge, value)
+
+
+# attr_name identifies the gizmo within its group; values flow through
+# compute/apply, not via a registered property.
+WALL_OFFSET_GIZMO_CONFIGS: list[DimensionGizmoConfig] = [
+    DimensionGizmoConfig(
+        attr_name="host_wall_offset_left",
+        axis=(1, 0, 0),
+        visibility_condition=has_host_wall,
+        compute_value=lambda p: _compute_value(p, _LEFT),
+        apply_value=lambda p, v: _apply_value(p, _LEFT, v),
+        matrix_position=lambda p: _edge_position(p, _LEFT),
+    ),
+    DimensionGizmoConfig(
+        attr_name="host_wall_offset_right",
+        axis=(-1, 0, 0),
+        visibility_condition=has_host_wall,
+        compute_value=lambda p: _compute_value(p, _RIGHT),
+        apply_value=lambda p, v: _apply_value(p, _RIGHT, v),
+        matrix_position=lambda p: _edge_position(p, _RIGHT),
+    ),
+    DimensionGizmoConfig(
+        attr_name="host_wall_offset_bottom",
+        axis=(0, 0, 1),
+        visibility_condition=has_host_wall,
+        compute_value=lambda p: _compute_value(p, _BOTTOM),
+        apply_value=lambda p, v: _apply_value(p, _BOTTOM, v),
+        matrix_position=lambda p: _edge_position(p, _BOTTOM),
+    ),
+    DimensionGizmoConfig(
+        attr_name="host_wall_offset_top",
+        axis=(0, 0, -1),
+        visibility_condition=has_host_wall,
+        compute_value=lambda p: _compute_value(p, _TOP),
+        apply_value=lambda p, v: _apply_value(p, _TOP, v),
+        matrix_position=lambda p: _edge_position(p, _TOP),
+    ),
+]

src/bonsai/bonsai/bim/module/model/window.py

@@ -39,7 +39,8 @@ import bonsai.core.root
 import bonsai.tool as tool
 from bonsai.bim.module.drawing import gizmos as gizmo
 from bonsai.bim.module.drawing.gizmos import DimensionGizmoConfig
-from bonsai.bim.parametric_lifecycle import FeatureModifierEditMixin
+from bonsai.bim.module.model.wall_offset_gizmos import WALL_OFFSET_GIZMO_CONFIGS
+from bonsai.bim.parametric_lifecycle import FeatureModifierEditMixin, PickTypeMixin
 
 if TYPE_CHECKING:
     from bonsai.bim.module.model.prop import BIMWindowProperties
@@ -491,7 +492,7 @@ class _WindowEditMixin(FeatureModifierEditMixin):
 
     @classmethod
     def _is_element_type(cls, element):
-        return tool.Blender.Modifier.is_window(element)
+        return tool.Parametric.is_window(element)
 
     @classmethod
     def _get_props(cls, obj: bpy.types.Object):
@@ -551,11 +552,11 @@ class RemoveWindow(bpy.types.Operator, tool.Ifc.Operator):
         return {"FINISHED"}
 
 
-class CycleWindowType(bpy.types.Operator, tool.Ifc.Operator, gizmo.CycleTypeMixin):
-    """Cycle through available window types. Shift+click to cycle in reverse."""
+class PickWindowType(bpy.types.Operator, tool.Ifc.Operator, PickTypeMixin):
+    """Pick a window type from a popup menu."""
 
-    bl_idname = "bim.cycle_window_type"
-    bl_label = "Cycle Window Type"
+    bl_idname = "bim.pick_window_type"
+    bl_label = "Pick Window Type"
     bl_options = {"REGISTER", "UNDO"}
 
     element_checker = tool.Parametric.is_window
@@ -564,7 +565,7 @@ class CycleWindowType(bpy.types.Operator, tool.Ifc.Operator, gizmo.CycleTypeMixi
     type_attr = "window_type"
 
     def _execute(self, context: bpy.types.Context) -> set[str]:
-        return self._cycle_type(context)
+        return self._pick_type(context)
 
 
 # Frame accessor factory - creates callbacks that delegate to BIMWindowProperties methods
@@ -602,7 +603,7 @@ class GizmoWindowEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
     enable_editing_operator = "bim.enable_editing_window"
     finish_editing_operator = "bim.finish_editing_window"
     cancel_editing_operator = "bim.cancel_editing_window"
-    cycle_type_operator = "bim.cycle_window_type"
+    pick_type_operator = "bim.pick_window_type"
 
     # matrix_position lambdas replace the get_dimension_matrix_* methods
     dimension_gizmo_props = [
@@ -743,6 +744,7 @@ class GizmoWindowEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
         ),
         # lining_offset is handled specially in _update_dimension_gizmo_positions due to negative value support
         DimensionGizmoConfig(attr_name="lining_offset", axis=(0, 1, 0), min_value=-10.0),
+        *WALL_OFFSET_GIZMO_CONFIGS,
     ]
 
     props_getter = tool.Model.get_window_props
@@ -750,7 +752,7 @@ class GizmoWindowEdition(bpy.types.GizmoGroup, gizmo.BaseParametricGizmoGroup):
 
     @classmethod
     def is_element_type(cls, element: ifcopenshell.entity_instance) -> bool:
-        return tool.Blender.Modifier.is_window(element)
+        return tool.Parametric.is_window(element)
 
     def get_icon_y_extent(self, props: "BIMWindowProperties") -> tuple[float, float]:
         """Get Y extents for window icon positioning.

src/bonsai/bonsai/bim/module/model/workspace.py

@@ -963,13 +963,19 @@ class EditObjectUI:
 
     @classmethod
     def draw_regen_operations(cls, row, ui_context):
-        if AuthoringData.data["is_regenable_element"]:
+        # ``AuthoringData.load`` flips ``is_loaded`` at entry as a recursion
+        # guard, so a partial load (any computation along the way raising)
+        # leaves the tail keys unset. ``.get()`` keeps the header draw alive
+        # until the underlying failure is investigated.
+        if AuthoringData.data.get("is_regenable_element"):
             row = cls.layout.row(align=True) if ui_context != "TOOL_HEADER" else row
             add_layout_hotkey_operator(row, "Regen", "S_G", "Recalculate Element Geometry", ui_context)
 
         if PortData.data["total_ports"] > 0:
             row = cls.layout.row(align=True) if ui_context != "TOOL_HEADER" else row
-            add_layout_hotkey_operator(row, "Regen", "S_G", bpy.ops.bim.regenerate_distribution_element.__doc__, ui_context)
+            add_layout_hotkey_operator(
+                row, "Regen", "S_G", bpy.ops.bim.regenerate_distribution_element.__doc__, ui_context
+            )
 
     @classmethod
     def draw_void(cls, context, row):
@@ -1315,7 +1321,7 @@ class Hotkey(bpy.types.Operator, tool.Ifc.Operator):
                 bpy.ops.bim.recalculate_profile()
         elif self.active_class in ("IfcWindow", "IfcWindowStandardCase", "IfcDoor", "IfcDoorStandardCase"):
             bpy.ops.bim.recalculate_fill()
-        elif self.active_class in ("IfcSpace"):
+        elif self.active_class in ("IfcSpace",):
             bpy.ops.bim.generate_space()
 
     def hotkey_S_M(self):
@@ -1442,10 +1448,7 @@ class Hotkey(bpy.types.Operator, tool.Ifc.Operator):
             bpy.ops.bim.enable_editing_extrusion_axis()
 
     def hotkey_A_O(self):
-        if tool.Model.get_model_props().openings:
-            bpy.ops.bim.edit_openings(apply_all=True)
-        else:
-            bpy.ops.bim.show_openings()
+        bpy.ops.bim.toggle_host_openings()
 
     def hotkey_C_E(self):
         if not bpy.context.selected_objects:

src/bonsai/bonsai/bim/module/nest/decorator.py

@@ -20,7 +20,6 @@ import blf
 import bpy
 import gpu
 import ifcopenshell.util.element
-from bpy.types import SpaceView3D
 from bpy_extras import view3d_utils
 from gpu_extras.batch import batch_for_shader
 from mathutils import Vector
@@ -28,12 +27,6 @@ from mathutils import Vector
 import bonsai.tool as tool
 
 
-def transparent_color(color, alpha=0.1):
-    color = [i for i in color]
-    color[3] = alpha
-    return color
-
-
 def create_bounding_box(objs):
     # Initialize the bounding box coordinates
     min_x, min_y, min_z = float("inf"), float("inf"), float("inf")
@@ -79,26 +72,8 @@ def create_bounding_box(objs):
     return indices, edges
 
 
-class NestDecorator:
-    is_installed = False
-    handlers = []
-
-    @classmethod
-    def install(cls, context):
-        if cls.is_installed:
-            cls.uninstall()
-        handler = cls()
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_nest, (context,), "WINDOW", "POST_VIEW"))
-        cls.is_installed = True
-
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
+class NestDecorator(tool.Blender.ViewportDecorator):
+    draw_method = "draw_nest"
 
     def dotted_line_shader(self):
         vert_out = gpu.types.GPUStageInterfaceInfo("my_interface")
@@ -154,14 +129,6 @@ class NestDecorator:
         shader.uniform_float("u_Scale", 25)
         batch.draw(shader)
 
-    def draw_batch(self, shader_type, content_pos, color, indices=None):
-        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
-            return
-        shader = self.line_shader if shader_type == "LINES" else self.shader
-        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
-        shader.uniform_float("color", color)
-        batch.draw(shader)
-
     def draw_nest(self, context: bpy.types.Context) -> None:
         props = tool.Nest.get_nest_props()
         if props.in_nest_mode:
@@ -226,35 +193,11 @@ class NestDecorator:
             self.draw_custom_batch(line, decorator_color_unselected)
 
 
-class NestModeDecorator:
-    is_installed = False
-    handlers = []
-
-    @classmethod
-    def install(cls, context):
-        if cls.is_installed:
-            cls.uninstall()
-        handler = cls()
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_nest_name, (context,), "WINDOW", "POST_PIXEL"))
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_nest_empty, (context,), "WINDOW", "POST_VIEW"))
-        cls.is_installed = True
-
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
-
-    def draw_batch(self, shader_type, content_pos, color, indices=None):
-        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
-            return
-        shader = self.line_shader if shader_type == "LINES" else self.shader
-        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
-        shader.uniform_float("color", color)
-        batch.draw(shader)
+class NestModeDecorator(tool.Blender.ViewportDecorator):
+    draw_methods = (
+        ("draw_nest_name", "POST_PIXEL"),
+        ("draw_nest_empty", "POST_VIEW"),
+    )
 
     def draw_nest_name(self, context):
         if context.mode == "EDIT_MESH":

src/bonsai/bonsai/bim/module/patch/__init__.py

@@ -21,6 +21,7 @@ import bpy
 from . import operator, prop, ui
 
 classes = (
+    operator.AddIfcPatchPreset,
     operator.ExecuteIfcPatch,
     operator.ExtractSelectedElements,
     operator.RunMigratePatch,
@@ -28,6 +29,7 @@ classes = (
     operator.SelectIfcPatchOutput,
     operator.UpdateIfcPatchArguments,
     prop.BIMPatchProperties,
+    ui.BIM_MT_ifc_patch_presets,
     ui.BIM_PT_patch,
 )
 

src/bonsai/bonsai/bim/module/patch/operator.py

@@ -23,6 +23,7 @@ from typing import TYPE_CHECKING, cast
 import bpy
 import ifcopenshell
 import ifcpatch
+from bl_operators.presets import AddPresetBase
 from bpy_extras.io_utils import ExportHelper, ImportHelper
 
 import bonsai.bim.handler
@@ -77,6 +78,27 @@ class ExecuteIfcPatch(bpy.types.Operator):
             return False
         return True
 
+    def invoke(self, context, event):
+        # Migrating IFC4 → IFC2X3 is lossy (enum drops, IFC4-only classes
+        # become IfcBuildingElementProxy, tessellated meshes get rebuilt as
+        # IfcFacetedBrep). Confirm before running so the user knows.
+        if tool.Patch.migration_is_lossy_downgrade():
+            return context.window_manager.invoke_props_dialog(self, width=480)
+        return self.execute(context)
+
+    def draw(self, context):
+        layout = self.layout
+        layout.label(text="Downgrading to IFC2X3 is lossy.", icon="ERROR")
+        column = layout.column(align=True)
+        column.label(text="Geometry will be preserved as faithfully as possible:")
+        column.label(text="• IfcIndexedPolyCurve → IfcPolyline (arcs approximated by chords)")
+        column.label(text="• IfcPolygonalFaceSet / IfcTriangulatedFaceSet → IfcFacetedBrep")
+        column.separator()
+        column.label(text="The following information is lost:")
+        column.label(text="• IFC4-only classes (IfcLamp, IfcPipeSegment, …) → IfcBuildingElementProxy")
+        column.label(text="• PredefinedType enum values absent from IFC2X3 are dropped")
+        column.label(text="  (original class + enum saved as ObjectType, e.g. 'IfcLamp/COMPACTFLUORESCENT')")
+
     def execute(self, context):
         props = tool.Patch.get_patch_props()
         recipe_name = props.ifc_patch_recipes
@@ -224,3 +246,38 @@ class ExtractSelectedElements(bpy.types.Operator):
         query = tool.Search.get_query_for_selected_elements()
         props.ifc_patch_args_attr[0].string_value = query
         return {"FINISHED"}
+
+
+class AddIfcPatchPreset(AddPresetBase, bpy.types.Operator):
+    """Save / remove ifc-patch argument presets, scoped per recipe.
+
+    Presets live in the standard Blender preset directory under
+    ``bonsai/ifc_patch/<recipe>/`` so a preset created for ``ExtractElements``
+    does not pollute the preset list for ``Migrate``. Persistence across files
+    and sessions is inherited from Blender's preset system."""
+
+    bl_idname = "bim.add_ifc_patch_preset"
+    bl_label = "Add IFC Patch Preset"
+    preset_menu = "BIM_MT_ifc_patch_presets"
+    preset_defines = ["props = bpy.context.scene.BIMPatchProperties"]
+
+    @property
+    def preset_subdir(self) -> str:
+        return tool.Patch.get_preset_subdir()
+
+    @property
+    def preset_values(self) -> list[str]:
+        # `Attribute.get_value_name()` returns the storage field for the
+        # argument's data_type (string_value, bool_value, …). For file
+        # arguments it returns the wrapping PointerProperty (`filepath_value`)
+        # — the scalar path the preset needs is `.single_file` on that.
+        props = tool.Patch.get_patch_props()
+        values = []
+        for i, arg in enumerate(props.ifc_patch_args_attr):
+            field = arg.get_value_name()
+            if not field:
+                continue
+            if arg.data_type == "file":
+                field = f"{field}.single_file"
+            values.append(f"props.ifc_patch_args_attr[{i}].{field}")
+        return values

src/bonsai/bonsai/bim/module/patch/prop.py

@@ -71,6 +71,15 @@ def get_ifcpatch_recipes(self: "BIMPatchProperties", context: bpy.types.Context)
 
 def update_ifc_patch_recipe(self: "BIMPatchProperties", context: bpy.types.Context) -> None:
     bpy.ops.bim.update_ifc_patch_arguments(recipe=self.ifc_patch_recipes)
+    # Blender's script.execute_preset mutates the menu class's bl_label to
+    # the loaded preset's display name (used as a "currently selected"
+    # indicator). The label persists across recipe changes — making the new
+    # recipe's menu falsely show the previous recipe's preset name. Reset
+    # the label to the menu's canonical title so it always matches the
+    # active recipe's preset list.
+    menu_cls = getattr(bpy.types, "BIM_MT_ifc_patch_presets", None)
+    if menu_cls is not None:
+        menu_cls.bl_label = "IFC Patch Presets"
 
 
 class BIMPatchProperties(PropertyGroup):

src/bonsai/bonsai/bim/module/patch/ui.py

@@ -29,6 +29,20 @@ if TYPE_CHECKING:
     from bonsai.bim.prop import Attribute
 
 
+class BIM_MT_ifc_patch_presets(bpy.types.Menu):
+    """Lists ifc-patch presets for the currently selected recipe.
+
+    ``preset_subdir`` is resolved per draw so switching recipes swaps the
+    preset list without re-registering the menu."""
+
+    bl_label = "IFC Patch Presets"
+    preset_operator = "script.execute_preset"
+
+    def draw(self, context: bpy.types.Context) -> None:
+        self.preset_subdir = tool.Patch.get_preset_subdir()
+        bpy.types.Menu.draw_preset(self, context)
+
+
 class BIM_PT_patch(bpy.types.Panel):
     bl_label = "Patch"
     bl_idname = "BIM_PT_patch"
@@ -66,6 +80,11 @@ class BIM_PT_patch(bpy.types.Panel):
                 row.operator("bim.patch_query_from_selected", text="", icon="EYEDROPPER")
 
         if props.ifc_patch_args_attr:
+            preset_row = layout.row(heading="Preset", align=True)
+            preset_row.menu("BIM_MT_ifc_patch_presets", text=BIM_MT_ifc_patch_presets.bl_label)
+            preset_row.operator("bim.add_ifc_patch_preset", text="", icon="ADD")
+            preset_row.operator("bim.add_ifc_patch_preset", text="", icon="REMOVE").remove_active = True
+
             draw_callback = draw_callback_ if props.ifc_patch_recipes == "ExtractElements" else None
             draw_attributes(props.ifc_patch_args_attr, layout, callback=draw_callback)
 

src/bonsai/bonsai/bim/module/project/__init__.py

@@ -18,6 +18,8 @@
 
 import bpy
 
+import bonsai.tool as tool
+
 from . import decorator, gizmo, operator, prop, ui, workspace
 
 classes = (
@@ -28,6 +30,12 @@ classes = (
     operator.AppendLibraryElementByQuery,
     operator.AssignLibraryDeclaration,
     operator.BIM_FH_import_ifc,
+    operator.BIM_OT_apply_pending_opening_cuts,
+    operator.BIM_OT_dismiss_multi_instance_warning,
+    operator.BIM_OT_dismiss_pending_array_repair,
+    operator.BIM_OT_dismiss_pending_opening_cuts,
+    operator.BIM_OT_select_pending_array_repair,
+    operator.BIM_OT_select_pending_opening_cuts,
     operator.BIM_OT_load_clipping_planes,
     operator.BIM_OT_save_clipping_planes,
     operator.ChangeLibraryElement,
@@ -52,6 +60,8 @@ classes = (
     operator.LinkIfc,
     operator.LoadBlendMetadataAndIFC,
     operator.LoadLink,
+    operator.AutosavePrompt,
+    operator.LoadAutosavedRecoveryPopup,
     operator.LoadLinkedProject,
     operator.LoadProject,
     operator.LoadProjectElements,
@@ -82,6 +92,8 @@ classes = (
     prop.FilterCategory,
     prop.Link,
     prop.EditedObj,
+    prop.PendingArrayRepair,
+    prop.PendingOpeningRecut,
     prop.BIMProjectProperties,
     prop.MeasureToolSettings,
     ui.BIM_MT_new_project,
@@ -128,6 +140,7 @@ def register():
 def unregister():
     if not bpy.app.background:
         bpy.utils.unregister_tool(workspace.ExploreTool)
+    tool.Autosave.cancel_timer()
     del bpy.types.Scene.BIMProjectProperties
     del bpy.types.Scene.MeasureToolSettings
     bpy.app.handlers.load_post.remove(decorator.toggle_decorations_on_load)

src/bonsai/bonsai/bim/module/project/data.py

@@ -162,8 +162,8 @@ class ProjectLibraryData:
         library_file = IfcStore.library_file
         if library_file is None or library_file.schema == "IFC2X3":
             return results
-        project = library_file.by_type("IfcProject")[0]
-        results.append((str(project.id()), f"IfcProject {project.Name or 'Unnamed'}", project.Description or ""))
+        root = tool.Project.get_root_context(library_file)
+        results.append((str(root.id()), f"{root.is_a()} {root.Name or 'Unnamed'}", root.Description or ""))
         for library_id, data in cls.data["project_libraries"].items():
             results.append((str(library_id), data["Name"] or "Unnamed", data["Description"] or ""))
         return results

src/bonsai/bonsai/bim/module/project/decorator.py

@@ -42,12 +42,6 @@ def toggle_decorations_on_load(*args):
     # as queried object is linked from separate .blend file.
 
 
-def transparent_color(color, alpha=0.1):
-    color = [i for i in color]
-    color[3] = alpha
-    return color
-
-
 class ProjectDecorator:
     installed = None
 
@@ -80,11 +74,6 @@ class ProjectDecorator:
         unselected_elements_color = self.addon_prefs.decorator_color_unselected
         special_elements_color = self.addon_prefs.decorator_color_special
 
-        def transparent_color(color, alpha=0.1):
-            color = [i for i in color]
-            color[3] = alpha
-            return color
-
         gpu.state.point_size_set(6)
         gpu.state.blend_set("ALPHA")
 
@@ -110,7 +99,9 @@ class ProjectDecorator:
 
         if geom.selected_edges:
             self.draw_batch("LINES", selected_vertices, selected_elements_color, geom.selected_edges)
-            self.draw_batch("TRIS", selected_vertices, transparent_color(selected_elements_color), geom.selected_tris)
+            self.draw_batch(
+                "TRIS", selected_vertices, tool.Blender.transparent_color(selected_elements_color), geom.selected_tris
+            )
 
 
 class ClippingPlaneDecorator:
@@ -145,11 +136,6 @@ class ClippingPlaneDecorator:
         unselected_elements_color = self.addon_prefs.decorator_color_unselected
         special_elements_color = self.addon_prefs.decorator_color_special
 
-        def transparent_color(color, alpha=0.1):
-            color = [i for i in color]
-            color[3] = alpha
-            return color
-
         gpu.state.point_size_set(6)
         gpu.state.blend_set("ALPHA")
 
@@ -210,37 +196,21 @@ class ClippingPlaneDecorator:
 
             if unselected_edges:
                 self.draw_batch("LINES", unselected_vertices, special_elements_color, unselected_edges)
-                self.draw_batch("TRIS", unselected_vertices, transparent_color(special_elements_color), unselected_tris)
+                self.draw_batch(
+                    "TRIS", unselected_vertices, tool.Blender.transparent_color(special_elements_color), unselected_tris
+                )
             if selected_edges:
                 self.draw_batch("LINES", selected_vertices, selected_elements_color, selected_edges)
-                self.draw_batch("TRIS", selected_vertices, transparent_color(selected_elements_color), selected_tris)
+                self.draw_batch(
+                    "TRIS", selected_vertices, tool.Blender.transparent_color(selected_elements_color), selected_tris
+                )
 
 
-class MeasureDecorator:
-    is_installed = False
-    handlers = []
-
-    @classmethod
-    def install(cls, context):
-        if cls.is_installed:
-            cls.uninstall()
-        handler = cls()
-        cls.handlers.append(
-            SpaceView3D.draw_handler_add(handler.draw_measurements_text, (context,), "WINDOW", "POST_PIXEL")
-        )
-        cls.handlers.append(
-            SpaceView3D.draw_handler_add(handler.draw_measurements_poly, (context,), "WINDOW", "POST_VIEW")
-        )
-        cls.is_installed = True
-
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
+class MeasureDecorator(tool.Blender.ViewportDecorator):
+    draw_methods = (
+        ("draw_measurements_text", "POST_PIXEL"),
+        ("draw_measurements_poly", "POST_VIEW"),
+    )
 
     def draw_measurements_text(self, context):
         PolylineDecorator().select_and_draw_measurements_text(context)

src/bonsai/bonsai/bim/module/project/operator.py

@@ -281,9 +281,9 @@ class RefreshLibrary(bpy.types.Operator):
         elements = {e for e in elements if not tool.Project.is_element_assigned_to_project_library(e, rels)}
         self.props.add_library_project_library("Unassigned", len(elements), 0, False)
 
-        ifc_project = library_file.by_type("IfcProject")[0]
+        root_context = tool.Project.get_root_context(library_file)
         hierarchy = tool.Project.get_project_hierarchy(library_file)
-        tool.Project.load_project_libraries_to_ui(ifc_project, hierarchy)
+        tool.Project.load_project_libraries_to_ui(root_context, hierarchy)
         return {"FINISHED"}
 
 
@@ -763,7 +763,10 @@ class EditProjectLibrary(bpy.types.Operator):
         previous_parent_library = tool.Project.get_parent_library(project_library)
         new_parent_library = library_file.by_id(int(props.parent_library))
         if previous_parent_library != new_parent_library:
-            if previous_parent_library.is_a("IfcProject"):
+            if previous_parent_library is None:
+                # Edited library was a root in a library-only file; nest it under the new parent.
+                ifcopenshell.api.nest.assign_object(library_file, [project_library], new_parent_library)
+            elif previous_parent_library.is_a("IfcProject"):
                 # Then new one is IfcProjectLibrary.
                 ifcopenshell.api.nest.assign_object(library_file, [project_library], new_parent_library)
             else:  # Previous is IfcProjectLibrary.
@@ -804,9 +807,12 @@ class AddProjectLibrary(bpy.types.Operator):
         props = tool.Project.get_project_props()
         library_file = IfcStore.library_file
         assert library_file
-        project = library_file.by_type("IfcProject")[0]
+        root_context = tool.Project.get_root_context(library_file)
         project_library = ifcopenshell.api.root.create_entity(library_file, "IfcProjectLibrary")
-        ifcopenshell.api.project.assign_declaration(library_file, [project_library], project)
+        if root_context.is_a("IfcProject"):
+            ifcopenshell.api.project.assign_declaration(library_file, [project_library], root_context)
+        else:
+            ifcopenshell.api.nest.assign_object(library_file, [project_library], root_context)
         ProjectLibraryData.load()  # Update enum.
         props.selected_project_library = str(project_library.id())
         props.is_editing_project_library = True
@@ -979,8 +985,10 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
         ),
         default=False,
     )
+    skip_autosave_recovery: bpy.props.BoolProperty(default=False, options={"HIDDEN", "SKIP_SAVE"})
     use_detailed_tooltip: bpy.props.BoolProperty(default=False, options={"HIDDEN"})
     filename_ext = ".ifc"
+    skip_recent: bpy.props.BoolProperty(default=False, options={"HIDDEN", "SKIP_SAVE"})
 
     if TYPE_CHECKING:
         filepath: str
@@ -989,6 +997,7 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
         use_relative_path: bool
         should_start_fresh_session: bool
         import_without_ifc_data: bool
+        skip_autosave_recovery: bool
         use_detailed_tooltip: bool
 
     @classmethod
@@ -1035,7 +1044,26 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
 
         return tooltip
 
+    def check_autosave_recovery(self, context: bpy.types.Context) -> set["rna_enums.OperatorReturnItems"] | None:
+        if self.skip_autosave_recovery:
+            return None
+        autosaved_filepath = tool.Autosave.get_newer_autosaved_path(self.get_filepath_abs())
+        if not autosaved_filepath:
+            return None
+        return bpy.ops.bim.load_autosaved_recovery_popup(
+            "INVOKE_DEFAULT",
+            original_filepath=str(self.get_filepath_abs()),
+            autosaved_filepath=autosaved_filepath,
+            is_advanced=self.is_advanced,
+            use_relative_path=self.use_relative_path,
+            should_start_fresh_session=self.should_start_fresh_session,
+            import_without_ifc_data=self.import_without_ifc_data,
+        )
+
     def execute(self, context):
+        if recovery := self.check_autosave_recovery(context):
+            return recovery
+
         if (
             tool.Blender.get_addon_preferences().save_metadata_blend_file
             and self.should_start_fresh_session
@@ -1113,6 +1141,14 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
                     f"Error loading IFC file from filepath '{filepath}'. See logs above in the system console for the details.",
                 )
                 return {"CANCELLED"}
+            if not tool.Ifc.get().by_type("IfcProject"):
+                self.report(
+                    {"ERROR"},
+                    "This file contains no IfcProject. It is likely an IFC project library — "
+                    "load it via Project Setup → Project Library → Select Library File instead.",
+                )
+                IfcStore.purge()
+                return {"CANCELLED"}
             props = tool.Project.get_project_props()
             props.is_loading = True
             props.total_elements = len(tool.Ifc.get().by_type("IfcElement"))
@@ -1122,7 +1158,8 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
             props.should_save_metadata_for_this_file = metadata_doc is not None
 
             tool.Blender.register_toolbar()
-            tool.Project.add_recent_ifc_project(self.get_filepath_abs())
+            if not self.skip_recent:
+                tool.Project.add_recent_ifc_project(self.get_filepath_abs())
 
             if self.is_advanced:
                 pass
@@ -1135,10 +1172,13 @@ class LoadProject(bpy.types.Operator, IFCFileSelector, ImportHelper):
         except:
             bonsai.last_error = traceback.format_exc()
             raise
+        tool.Autosave.reset_timer()
         return {"FINISHED"}
 
     def invoke(self, context, event):
         if self.filepath:
+            if recovery := self.check_autosave_recovery(context):
+                return recovery
             return self.execute(context)
         return ImportHelper.invoke(self, context, event)
 
@@ -1223,6 +1263,30 @@ class LoadProjectElements(bpy.types.Operator):
         props = tool.Project.get_project_props()
         props.is_loading = False
 
+        # Stash elements the kernel skipped opening cuts on (HasOpenings > void_limit).
+        # The Project panel banner offers the user a one-click recut.
+        props.pending_opening_recut.clear()
+        if ifc_importer.gross_elements:
+            for element in ifc_importer.gross_elements:
+                item = props.pending_opening_recut.add()
+                item.ifc_definition_id = element.id()
+            self.report(
+                {"WARNING"},
+                f"{len(ifc_importer.gross_elements)} element(s) had too many openings and were loaded without cuts. "
+                f"Apply manually from the Project panel.",
+            )
+
+        props.pending_array_repair.clear()
+        if ifc_importer.broken_arrays:
+            for element in ifc_importer.broken_arrays:
+                item = props.pending_array_repair.add()
+                item.ifc_definition_id = element.id()
+            self.report(
+                {"WARNING"},
+                f"{len(ifc_importer.broken_arrays)} array parent(s) reference missing child GUIDs. "
+                f"Inspect from the Project panel.",
+            )
+
         tool.Project.load_default_thumbnails()
         tool.Project.set_default_context()
         tool.Project.set_default_modeling_dimensions()
@@ -1256,6 +1320,11 @@ class LoadProjectElements(bpy.types.Operator):
             if element.IsDecomposedBy:
                 for subelement in element.IsDecomposedBy[0].RelatedObjects:
                     decomposed_elements.add(subelement)
+            # IfcSurfaceFeature (e.g. road markings) adhere to a host element
+            # via IfcRelAdheresToElement, a [1:1] hierarchical relationship in
+            # the same family as aggregation, containment and nesting (IFC4.3).
+            for rel in getattr(element, "HasSurfaceFeatures", ()):
+                decomposed_elements.update(rel.RelatedSurfaceFeatures)
         if decomposed_elements:
             self.append_decomposed_elements(decomposed_elements)
         elements.update(decomposed_elements)
@@ -1384,6 +1453,7 @@ class LinkIfc(bpy.types.Operator, ImportHelper, tool.Ifc.Operator):
                 new.ifc_definition_id = reference.id()
             new.name = filepath
             new.filepath = filepath
+            new.query = self.query
             bpy.ops.bim.load_link(link_index=-1, use_cache=self.use_cache, query=self.query)
 
 
@@ -1454,6 +1524,10 @@ class LoadLink(bpy.types.Operator, tool.Ifc.Operator):
 
     def _execute(self, context):
         self.link = tool.Project.get_project_props().links[self.link_index]
+        # Fall back to the Link's stored query so callers that omit it
+        # still replay the filter the link was created with.
+        if not self.query and self.link.query:
+            self.query = self.link.query
         filepath = Path(tool.Ifc.resolve_uri(self.link.filepath))
         if not filepath.exists():
             self.report({"ERROR"}, f"File does not exist: '{filepath}'")
@@ -1621,13 +1695,36 @@ class ReloadLink(bpy.types.Operator):
     bl_description = "Reload the selected file"
 
     link_index: bpy.props.IntProperty(name="Link Index")
+    query: bpy.props.StringProperty(
+        name="Query",
+        description=(
+            "Custom selector query to use to load element from a linked model. E.g. 'IfcElement'.\n\n"
+            "Default query - IfcElement, but excluding IfcProxy, IfcSpatialStructureElement, IfcSpatialElement, IfcFeatureElement."
+        ),
+    )
 
     if TYPE_CHECKING:
         link_index: int
+        query: str
+
+    def invoke(self, context, event):
+        link = tool.Project.get_project_props().links[self.link_index]
+        self.query = link.query
+        return context.window_manager.invoke_props_dialog(self)
+
+    def draw(self, context):
+        assert self.layout
+        self.layout.prop(self, "query", placeholder="IfcElement")
 
     def execute(self, context):
+        link = tool.Project.get_project_props().links[self.link_index]
+        # An unset query means the operator was called without the dialog
+        # (e.g. from a script) - preserve the link's stored query instead
+        # of overwriting it with the empty default.
+        if self.properties.is_property_set("query"):
+            link.query = self.query
         bpy.ops.bim.unload_link(link_index=self.link_index)
-        return bpy.ops.bim.load_link(link_index=self.link_index, use_cache=False) or {"FINISHED"}
+        return bpy.ops.bim.load_link(link_index=self.link_index, use_cache=False, query=link.query) or {"FINISHED"}
 
 
 class ToggleLinkSelectability(bpy.types.Operator):
@@ -1876,6 +1973,7 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
     json_compact: bpy.props.BoolProperty(name="Export Compact IFCJSON", default=False)
     should_save_as: bpy.props.BoolProperty(name="Should Save As", default=False, options={"HIDDEN"})
     use_relative_path: bpy.props.BoolProperty(name="Use Relative Path", default=False)
+    skip_recent: bpy.props.BoolProperty(default=False, options={"HIDDEN", "SKIP_SAVE"})
 
     if TYPE_CHECKING:
         filter_glob: str
@@ -1936,6 +2034,18 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
         return {"FINISHED"}
 
     def _execute(self, context):
+        project_props = tool.Project.get_project_props()
+        project_props.use_relative_project_path = self.use_relative_path
+
+        # Fallback if filepath is not set
+        if not getattr(self, "filepath", None) or self.filepath.strip() in ("", ".ifc"):
+            props = tool.Blender.get_bim_props()
+            if props.ifc_file:
+                self.filepath = str(tool.Blender.ensure_blender_path_is_abs(Path(props.ifc_file)))
+            else:
+                self.report({"ERROR"}, "No filepath available for saving.")
+                return {"CANCELLED"}
+
         committed, failed_commits = tool.Parametric.commit_pending_edits()
         # Previews are session-transient — discard rather than commit. Sibling
         # gizmo polls gate on each preview's is_active flag, and a stuck flag
@@ -1998,7 +2108,8 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
         settings.logger.info("Export finished in {:.2f} seconds".format(time.time() - start))
         print("Export finished in {:.2f} seconds".format(time.time() - start))
         # New project created in Bonsai should be in recent projects too.
-        tool.Project.add_recent_ifc_project(Path(output_file))
+        if not self.skip_recent:
+            tool.Project.add_recent_ifc_project(Path(output_file))
         props = tool.Project.get_project_props()
         if props.use_relative_project_path and bpy.data.is_saved:
             output_file = os.path.relpath(output_file, bpy.path.abspath("//"))
@@ -2032,6 +2143,7 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
             )
 
         bonsai.bim.handler.refresh_ui_data()
+        tool.Autosave.reset_timer()
 
     @classmethod
     def description(cls, context, properties):
@@ -2040,6 +2152,97 @@ class ExportIFC(bpy.types.Operator, ExportHelper):
         return "Save the IFC file.  Will save both .IFC/.BLEND files if synced together"
 
 
+class LoadAutosavedRecoveryPopup(bpy.types.Operator):
+    bl_idname = "bim.load_autosaved_recovery_popup"
+    bl_label = "Recover Autosaved File"
+    bl_options = {"REGISTER", "UNDO"}
+
+    original_filepath: bpy.props.StringProperty(options={"SKIP_SAVE"})
+    autosaved_filepath: bpy.props.StringProperty(options={"SKIP_SAVE"})
+    is_advanced: bpy.props.BoolProperty(default=False, options={"SKIP_SAVE"})
+    use_relative_path: bpy.props.BoolProperty(default=False, options={"SKIP_SAVE"})
+    should_start_fresh_session: bpy.props.BoolProperty(default=True, options={"SKIP_SAVE"})
+    import_without_ifc_data: bpy.props.BoolProperty(default=False, options={"SKIP_SAVE"})
+
+    def draw(self, context):
+        layout = self.layout
+        layout.label(text="A newer autosaved copy was found:", icon="INFO")
+        layout.label(text=os.path.basename(self.autosaved_filepath))
+        layout.separator()
+        layout.label(text="Do you want to load the autosaved version instead?")
+        layout.label(text="(Cancel will load the original)")
+
+    def invoke(self, context, event):
+        # invoke_props_dialog is modal - unlike invoke_popup/popup_menu, it
+        # isn't dismissed by the mouse simply leaving its bounds. It always
+        # renders both a fixed "Cancel" button and this confirm_text one, so
+        # the question is framed as Yes/Cancel rather than adding separate
+        # Load buttons on top.
+        return context.window_manager.invoke_props_dialog(
+            self, width=420, title="Recover Autosaved File", confirm_text="Yes"
+        )
+
+    def _load(self, filepath: str, skip_recent: bool) -> set["rna_enums.OperatorReturnItems"]:
+        return bpy.ops.bim.load_project(
+            filepath=filepath,
+            skip_autosave_recovery=True,  # Prevent infinite loop
+            is_advanced=self.is_advanced,
+            use_relative_path=self.use_relative_path,
+            should_start_fresh_session=self.should_start_fresh_session,
+            import_without_ifc_data=self.import_without_ifc_data,
+            skip_recent=skip_recent,
+        )
+
+    def execute(self, context):
+        result = self._load(self.autosaved_filepath, skip_recent=True)
+        # Re-point tracking at the original path so future saves write back
+        # to it, not "_autosaved.ifc".
+        tool.Ifc.set_path(self.original_filepath)
+        return result
+
+    def cancel(self, context):
+        # Also reached via Escape or a click outside the dialog, not just Cancel.
+        self._load(self.original_filepath, skip_recent=False)
+
+
+class AutosavePrompt(bpy.types.Operator):
+    bl_idname = "bim.autosave_prompt"
+    bl_label = "Autosave Reminder"
+    bl_options = set()
+
+    def invoke(self, context, event):
+        return context.window_manager.invoke_props_dialog(
+            self, width=400, confirm_text="Save", title="Autosave Reminder"
+        )
+
+    def draw(self, context):
+        layout = self.layout
+        layout.label(text="The autosave timer has expired.", icon="INFO")
+        layout.label(text="Would you like to save your IFC project now?")
+
+    def execute(self, context):
+        # Get current IFC path
+        props = tool.Blender.get_bim_props()
+        current_ifc_path = props.ifc_file
+
+        if not current_ifc_path:
+            self.report({"WARNING"}, "No IFC file path set. Please save manually.")
+            tool.Autosave.reset_timer()
+            return {"CANCELLED"}
+
+        # Call save_project with explicit filepath using EXEC_DEFAULT
+        result = bpy.ops.bim.save_project(
+            "EXEC_DEFAULT", filepath=current_ifc_path, should_save_as=False, skip_recent=True
+        )
+
+        tool.Autosave.reset_timer()
+        return result
+
+    def cancel(self, context):
+        tool.Autosave.reset_timer()
+        return {"CANCELLED"}
+
+
 class LoadLinkedProject(bpy.types.Operator, ImportHelper):
     bl_idname = "bim.load_linked_project"
     bl_label = "Load Project For Viewing Only"
@@ -3421,3 +3624,149 @@ class GenerateUVMap(bpy.types.Operator):
         tool.Loader.load_generated_uv_map(obj.data)
         self.report({"INFO"}, "Generated UV map for selected mesh.")
         return {"FINISHED"}
+
+
+class BIM_OT_apply_pending_opening_cuts(bpy.types.Operator, tool.Ifc.Operator):
+    """Recompute the wall mesh including opening subtractions for every host
+    that the load-time ``void_limit`` filter skipped. Clears the deferred
+    list on completion so the panel banner disappears."""
+
+    bl_idname = "bim.apply_pending_opening_cuts"
+    bl_label = "Apply Pending Opening Cuts"
+    bl_description = (
+        "Recompute meshes for elements whose openings were skipped at load because they had too many openings"
+    )
+    bl_options = {"REGISTER", "UNDO"}
+
+    def _execute(self, context: bpy.types.Context) -> set[str]:
+        pending = tool.Project.get_project_props().pending_opening_recut
+        applied = 0
+        skipped = 0
+        failed = 0
+        for item in pending:
+            try:
+                element = tool.Ifc.get().by_id(item.ifc_definition_id)
+            except RuntimeError:
+                skipped += 1
+                continue
+            obj = tool.Ifc.get_object(element)
+            if obj is None:
+                skipped += 1
+                continue
+            body = ifcopenshell.util.representation.get_representation(element, "Model", "Body", "MODEL_VIEW")
+            if body is None:
+                skipped += 1
+                continue
+            try:
+                tool.Geometry.reimport_element_representations(obj, body, apply_openings=True)
+                applied += 1
+            except (RuntimeError, OSError, AttributeError) as exc:
+                # Programmer errors (TypeError, ValueError, etc.) must surface — don't swallow them.
+                failed += 1
+                print(f"apply_pending_opening_cuts: failed to recompute {element} ({exc})")
+
+        pending.clear()
+        message = f"Applied opening cuts to {applied} element(s)."
+        if skipped:
+            message += f" {skipped} entry/entries skipped (entity or object no longer available)."
+        if failed:
+            message += f" {failed} entry/entries failed (see system console)."
+            self.report({"WARNING"}, message)
+        else:
+            self.report({"INFO"}, message)
+        return {"FINISHED"}
+
+
+class BIM_OT_dismiss_pending_opening_cuts(bpy.types.Operator):
+    bl_idname = "bim.dismiss_pending_opening_cuts"
+    bl_label = "Dismiss Pending Opening Cuts"
+    bl_description = "Clear the pending opening-cut list without applying it. Walls stay solid where openings would have been subtracted."
+    bl_options = {"REGISTER", "UNDO"}
+
+    def execute(self, context: bpy.types.Context) -> set[str]:
+        tool.Project.get_project_props().pending_opening_recut.clear()
+        return {"FINISHED"}
+
+
+class BIM_OT_dismiss_multi_instance_warning(bpy.types.Operator):
+    bl_idname = "bim.dismiss_multi_instance_warning"
+    bl_label = "Dismiss Multi-Instance Warning"
+    bl_description = (
+        "Hide the warning that another Blender instance has this IFC file open. Sticky for the current session."
+    )
+    bl_options = {"REGISTER"}
+
+    def execute(self, context: bpy.types.Context) -> set[str]:
+        from bonsai.bim.ifc import dismiss_multi_instance_warning
+
+        dismiss_multi_instance_warning()
+        return {"FINISHED"}
+
+
+class BIM_OT_select_pending_opening_cuts(bpy.types.Operator):
+    bl_idname = "bim.select_pending_opening_cuts"
+    bl_label = "Select Elements With Skipped Opening Cuts"
+    bl_description = "Select the Blender objects whose openings were skipped at load. Useful for locating which elements need attention."
+    bl_options = {"REGISTER", "UNDO"}
+
+    def execute(self, context: bpy.types.Context) -> set[str]:
+        ifc_file = tool.Ifc.get()
+        if ifc_file is None:
+            self.report({"INFO"}, "No IFC file loaded.")
+            return {"CANCELLED"}
+        objects: list[bpy.types.Object] = []
+        for item in tool.Project.get_project_props().pending_opening_recut:
+            try:
+                element = ifc_file.by_id(item.ifc_definition_id)
+            except RuntimeError:
+                continue
+            obj = tool.Ifc.get_object(element)
+            if obj is not None:
+                objects.append(obj)
+        if not objects:
+            self.report({"INFO"}, "No matching Blender objects found for the pending list.")
+            return {"CANCELLED"}
+        tool.Blender.set_objects_selection(context, active_object=objects[0], selected_objects=objects)
+        self.report({"INFO"}, f"Selected {len(objects)} element(s).")
+        return {"FINISHED"}
+
+
+class BIM_OT_select_pending_array_repair(bpy.types.Operator):
+    bl_idname = "bim.select_pending_array_repair"
+    bl_label = "Select Array Parents With Missing Children"
+    bl_description = "Select the Blender objects of array parents whose BBIM_Array.Data references children that don't resolve in the file."
+    bl_options = {"REGISTER", "UNDO"}
+
+    def execute(self, context: bpy.types.Context) -> set[str]:
+        ifc_file = tool.Ifc.get()
+        if ifc_file is None:
+            self.report({"INFO"}, "No IFC file loaded.")
+            return {"CANCELLED"}
+        objects: list[bpy.types.Object] = []
+        for item in tool.Project.get_project_props().pending_array_repair:
+            try:
+                element = ifc_file.by_id(item.ifc_definition_id)
+            except RuntimeError:
+                continue
+            obj = tool.Ifc.get_object(element)
+            if obj is not None:
+                objects.append(obj)
+        if not objects:
+            self.report({"INFO"}, "No matching Blender objects found for the pending list.")
+            return {"CANCELLED"}
+        tool.Blender.set_objects_selection(context, active_object=objects[0], selected_objects=objects)
+        self.report({"INFO"}, f"Selected {len(objects)} array parent(s).")
+        return {"FINISHED"}
+
+
+class BIM_OT_dismiss_pending_array_repair(bpy.types.Operator):
+    bl_idname = "bim.dismiss_pending_array_repair"
+    bl_label = "Dismiss Pending Array Repair"
+    bl_description = (
+        "Clear the pending array-repair list without acting on it. The underlying BBIM_Array.Data stays unchanged."
+    )
+    bl_options = {"REGISTER", "UNDO"}
+
+    def execute(self, context: bpy.types.Context) -> set[str]:
+        tool.Project.get_project_props().pending_array_repair.clear()
+        return {"FINISHED"}

src/bonsai/bonsai/bim/module/project/prop.py

@@ -98,7 +98,8 @@ def is_editing_project_library_update(self: "BIMProjectProperties", context: bpy
         project_library = library_file.by_id(int(self.selected_project_library))
         self.project_library_attributes.clear()
         bonsai.bim.helper.import_attributes(project_library, self.project_library_attributes)
-        self.parent_library = str(tool.Project.get_parent_library(project_library).id())
+        if parent_library := tool.Project.get_parent_library(project_library):
+            self.parent_library = str(parent_library.id())
         ProjectLibraryData.load()  # Show edit icon in enum.
         return
 
@@ -259,6 +260,11 @@ class Link(PropertyGroup):
         description="STEP ID of the IfcDocumentReference when linked to a parent IFC project. Zero when no parent IFC exists",
         default=0,
     )
+    query: StringProperty(
+        name="Query",
+        description="Selector query used to filter elements when loading the linked model",
+        default="",
+    )
 
     if TYPE_CHECKING:
         name: str
@@ -274,6 +280,7 @@ class Link(PropertyGroup):
         include_in_drawings: bool
         empty_handle: Union[bpy.types.Object, None]
         ifc_definition_id: int
+        query: str
 
 
 class EditedObj(PropertyGroup):
@@ -295,6 +302,28 @@ class LibraryBreadcrumb(PropertyGroup):
         library_id: int
 
 
+class PendingOpeningRecut(PropertyGroup):
+    """One element whose ``HasOpenings`` exceeded ``void_limit`` at load time
+    and was imported without opening subtractions. The user can later apply
+    them on demand from the Project panel banner."""
+
+    ifc_definition_id: IntProperty(name="IFC Definition ID")
+
+    if TYPE_CHECKING:
+        ifc_definition_id: int
+
+
+class PendingArrayRepair(PropertyGroup):
+    """One array parent whose ``BBIM_Array.Data`` references at least one
+    child GUID that does not resolve in the current IFC file. The user can
+    select these parents from the Project panel banner to inspect them."""
+
+    ifc_definition_id: IntProperty(name="IFC Definition ID")
+
+    if TYPE_CHECKING:
+        ifc_definition_id: int
+
+
 class BIMProjectProperties(PropertyGroup):
     is_editing: BoolProperty(name="Is Editing", default=False)
     is_loading: BoolProperty(name="Is Loading", default=False)
@@ -360,6 +389,8 @@ class BIMProjectProperties(PropertyGroup):
         default=30,
         description="Maxium number of openings that object can have. If object has more openings, it will be loaded without openings",
     )
+    pending_opening_recut: CollectionProperty(name="Pending Opening Recut", type=PendingOpeningRecut)
+    pending_array_repair: CollectionProperty(name="Pending Array Repair", type=PendingArrayRepair)
     style_limit: IntProperty(
         name="Style Limit",
         default=300,
@@ -525,6 +556,8 @@ class BIMProjectProperties(PropertyGroup):
         deflection_tolerance: float
         angular_tolerance: float
         void_limit: int
+        pending_opening_recut: bpy.types.bpy_prop_collection_idprop[PendingOpeningRecut]
+        pending_array_repair: bpy.types.bpy_prop_collection_idprop[PendingArrayRepair]
         style_limit: int
         distance_limit: float
         false_origin_mode: Literal["AUTOMATIC", "MANUAL", "DISABLED"]

src/bonsai/bonsai/bim/module/spatial/decorator.py

@@ -18,43 +18,17 @@
 
 import blf
 import gpu
-from bpy.types import SpaceView3D
 from bpy_extras.view3d_utils import location_3d_to_region_2d
-from gpu_extras.batch import batch_for_shader
 from mathutils import Vector
 
 import bonsai.tool as tool
 
 
-class GridDecorator:
-    is_installed = False
-    handlers = []
-
-    @classmethod
-    def install(cls, context):
-        if cls.is_installed:
-            cls.uninstall()
-        handler = cls()
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw_text, (context,), "WINDOW", "POST_PIXEL"))
-        cls.handlers.append(SpaceView3D.draw_handler_add(handler.draw, (context,), "WINDOW", "POST_VIEW"))
-        cls.is_installed = True
-
-    @classmethod
-    def uninstall(cls):
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
-
-    def draw_batch(self, shader_type, content_pos, color, indices=None):
-        if not tool.Blender.validate_shader_batch_data(content_pos, indices):
-            return
-        shader = self.line_shader if shader_type == "LINES" else self.shader
-        batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
-        shader.uniform_float("color", color)
-        batch.draw(shader)
+class GridDecorator(tool.Blender.ViewportDecorator):
+    draw_methods = (
+        ("draw_text", "POST_PIXEL"),
+        ("draw", "POST_VIEW"),
+    )
 
     def draw_text(self, context):
         if not tool.Blender.is_addon_enabled():

src/bonsai/bonsai/bim/module/structural/decorator.py

@@ -31,11 +31,17 @@ import bonsai.tool as tool
 from bonsai.bim.module.structural.load_decoration_data import ShaderInfo
 
 
-class LoadsDecorator:
+class LoadsDecorator(tool.Blender.ViewportDecorator):
     """Decorator to show structural loads in 3D"""
 
-    is_installed = False
-    handlers = []
+    # draw_methods exists to satisfy ViewportDecorator.__init_subclass__'s
+    # method-existence check; the override install below is what actually
+    # registers handlers (the POST_VIEW binding passes no context arg, which
+    # the base's generic install cannot express).
+    draw_methods = (
+        ("draw_load_values", "POST_PIXEL"),
+        ("__call__", "POST_VIEW"),
+    )
     decoration_data = None
     text_info = []
     shader_info = []
@@ -54,15 +60,6 @@ class LoadsDecorator:
         cls.update()
         cls.is_installed = True
 
-    @classmethod
-    def uninstall(cls) -> None:
-        for handler in cls.handlers:
-            try:
-                SpaceView3D.draw_handler_remove(handler, "WINDOW")
-            except ValueError:
-                pass
-        cls.is_installed = False
-
     @classmethod
     def update(cls) -> None:
         cls.decoration_data.update()

src/bonsai/bonsai/bim/module/style/operator.py

@@ -744,7 +744,7 @@ class EnableEditingSurfaceStyle(bpy.types.Operator):
         if self.ifc_class == "IfcSurfaceStyleLighting":
 
             def callback(attribute_name: str, _: object, data: dict[str, Any]) -> None:
-                assert attributes
+                assert attributes is not None
                 color = attributes.add()
                 assert isinstance(color, ColourRgb)
                 color.name = attribute_name
@@ -782,34 +782,40 @@ class EditSurfaceStyle(bpy.types.Operator, tool.Ifc.Operator):
     def _execute(self, context):
         self.props = tool.Style.get_style_props()
         self.style = tool.Ifc.get().by_id(self.props.is_editing_style)
+        prev_update_graph = self.props.update_graph
+        self.props["update_graph"] = False
 
-        style_elements = tool.Style.get_style_elements(self.style)
-        # NOTE: currently this operator is used to edit existing (and only existing) IfcSurfaceStyles
-        # or new or existing IfcSurfaceStyle components (shading, etc)
-        # which is kind of confusing.
-        if self.props.is_editing_class == "IfcSurfaceStyle":
-            self.surface_style = self.style
-        else:
-            self.surface_style = style_elements.get(self.props.is_editing_class, None)
-            self.shading_style = style_elements.get("IfcSurfaceStyleShading", None)
-            self.rendering_style = style_elements.get("IfcSurfaceStyleRendering", None)
-            self.texture_style = style_elements.get("IfcSurfaceStyleWithTextures", None)
+        try:
+            style_elements = tool.Style.get_style_elements(self.style)
 
-        if self.surface_style:
-            result = self.edit_existing_style()
-        else:
-            result = self.add_new_style()
+            # NOTE: currently this operator is used to edit existing (and only existing) IfcSurfaceStyles
+            # or new or existing IfcSurfaceStyle components (shading, etc)
+            # which is kind of confusing.
+            if self.props.is_editing_class == "IfcSurfaceStyle":
+                self.surface_style = self.style
+            else:
+                self.surface_style = style_elements.get(self.props.is_editing_class, None)
+                self.shading_style = style_elements.get("IfcSurfaceStyleShading", None)
+                self.rendering_style = style_elements.get("IfcSurfaceStyleRendering", None)
+                self.texture_style = style_elements.get("IfcSurfaceStyleWithTextures", None)
 
-        if result:
-            return result
+            if self.surface_style:
+                result = self.edit_existing_style()
+            else:
+                result = self.add_new_style()
 
-        tool.Style.disable_editing()
-        core.load_styles(tool.Style, style_type=self.props.style_type)
+            if result:
+                return result
 
-        # restore selected style type
-        material = tool.Ifc.get_object(self.style)
-        msprops = tool.Style.get_material_style_props(material)
-        msprops.active_style_type = msprops.active_style_type
+            tool.Style.disable_editing()
+            core.load_styles(tool.Style, style_type=self.props.style_type)
+
+            # restore selected style type
+            material = tool.Ifc.get_object(self.style)
+            msprops = tool.Style.get_material_style_props(material)
+            msprops.active_style_type = msprops.active_style_type
+        finally:
+            self.props["update_graph"] = prev_update_graph
 
     def edit_existing_style(self) -> None:
         ifc_file = tool.Ifc.get()
@@ -1231,4 +1237,5 @@ class RemoveSurfaceStyle(bpy.types.Operator, tool.Ifc.Operator):
         surface_style = tool.Style.get_style_elements(style)[props.is_editing_class]
         ifcopenshell.api.style.remove_surface_style(ifc_file, surface_style)
         core.disable_editing_style(tool.Style)
+        core.load_styles(tool.Style, style_type=props.style_type)
         return {"FINISHED"}

src/bonsai/bonsai/bim/module/style/prop.py

@@ -185,6 +185,13 @@ class ColourRgb(PropertyGroup):
     # to fit blender.bim.helper.draw_attribute
     is_optional = False
     special_type = ""
+    data_type = ""
+    ifc_class = ""
+    use_explorer_ui = False
+
+    @property
+    def display_name(self):
+        return self.name
 
     def get_value_name(self, *args, **kwargs):
         return "color_value"

src/bonsai/bonsai/bim/module/style/ui.py

@@ -176,8 +176,30 @@ class BIM_PT_styles(Panel):
         row.prop(self.props, "reflectance_method")
 
         if self.props.reflectance_method not in ("PHYSICAL", "NOTDEFINED", "FLAT"):
-            self.layout.label(text="Supported reflectance methods are:")
-            self.layout.label(text="PHYSICAL / NOTDEFINED / FLAT")
+            self.layout.label(
+                text=f"{self.props.reflectance_method} will be skipped: only PHYSICAL / NOTDEFINED / FLAT are supported",
+                icon="ERROR",
+            )
+        elif self.props.reflectance_method in ("PHYSICAL", "NOTDEFINED"):
+            if self.props.specular_colour_class == "IfcColourRgb":
+                self.layout.label(
+                    text="Metallic color is IFC-only in PHYSICAL/NOTDEFINED and does not affect Blender appearance",
+                    icon="ERROR",
+                )
+        elif self.props.reflectance_method == "FLAT":
+            if self.props.diffuse_colour_class == "IfcNormalisedRatioMeasure":
+                self.layout.label(
+                    text="Emissive ratio is IFC-only in FLAT Reflectance method and does not affect Blender appearance",
+                    icon="ERROR",
+                )
+            self.layout.label(
+                text="Specular value is IFC-only in FLAT Reflectance method and does not affect Blender appearance",
+                icon="ERROR",
+            )
+            self.layout.label(
+                text="Highlight value is IFC-only in FLAT Reflectance method and does not affect Blender appearance",
+                icon="ERROR",
+            )
 
         row = self.layout.row(align=True)
         row.label(text="Emissive" if self.props.reflectance_method == "FLAT" else "Diffuse")
@@ -232,6 +254,8 @@ class BIM_PT_styles(Panel):
         row.operator("bim.add_surface_texture", text="", icon="ADD")
         if textures:
             self.layout.prop(self.props, "uv_mode")
+            if self.props.uv_mode in ("Generated", "Camera"):
+                self.layout.label(text="Not available in SOLID Mode", icon="INFO")
 
         for i, texture in enumerate(textures):
             split = self.layout.split(factor=0.30, align=True)
@@ -244,6 +268,22 @@ class BIM_PT_styles(Panel):
             op_clear = row.operator("bim.remove_texture_map", text="", icon="X")
             op_path.texture_map_index = op_clear.texture_map_index = i
 
+            reflectance = self.props.reflectance_method
+            mode = texture.mode
+            if reflectance == "FLAT":
+                if mode != "EMISSIVE":
+                    self.layout.label(
+                        text=f"{mode} will be skipped: only EMISSIVE is supported for Render Reflectance FLAT",
+                        icon="ERROR",
+                    )
+            elif reflectance in ("PHYSICAL", "NOTDEFINED"):
+                _SUPPORTED = {"DIFFUSE", "NORMAL", "METALLICROUGHNESS", "EMISSIVE", "OCCLUSION"}
+                if mode not in _SUPPORTED:
+                    self.layout.label(
+                        text=f"{mode} will be skipped: not supported for Render Reflectance PHYSICAL/NOTDEFINED",
+                        icon="ERROR",
+                    )
+
     def draw_externally_defined_surface_style(self):
         row = self.layout.row()
         op = row.operator("bim.browse_external_style", icon="APPEND_BLEND", text="Append From Blend File")
@@ -252,10 +292,17 @@ class BIM_PT_styles(Panel):
         bonsai.bim.helper.draw_attributes(self.props.external_style_attributes, self.layout, enable_search=True)
 
     def draw_refraction_surface_style(self):
+        self.layout.label(
+            text="Refraction values are IFC-only and do not affect Blender surface appearance",
+            icon="ERROR",
+        )
         bonsai.bim.helper.draw_attributes(self.props.refraction_style_attributes, self.layout, enable_search=True)
-        row = self.layout.row(align=True)
 
     def draw_lighting_surface_style(self):
+        self.layout.label(
+            text="Lighting values are IFC-only and do not affect Blender surface appearance",
+            icon="ERROR",
+        )
         bonsai.bim.helper.draw_attributes(self.props.lighting_style_colours, self.layout)
 
     def draw_edit_ui(self, edit_label: str):

src/bonsai/bonsai/bim/module/system/decorator.py

@@ -15,9 +15,10 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was modified with the assistance of an AI coding tool.
 
 
-import bmesh
 import bpy
 import gpu
 from bpy.app.handlers import persistent
@@ -30,12 +31,6 @@ ERROR_ELEMENTS_COLOR = (1, 0.2, 0.322, 1)  # RED
 UNSPECIAL_ELEMENT_COLOR = (0.2, 0.2, 0.2, 1)  # GREY
 
 
-def transparent_color(color, alpha=0.1):
-    color = [i for i in color]
-    color[3] = alpha
-    return color
-
-
 @persistent
 def toggle_decorations_on_load(*args):
     props = tool.System.get_system_props()
@@ -78,15 +73,9 @@ class SystemDecorator:
         batch.draw(shader)
 
     def draw_faces(self, bm, vertices_coords):
-        """mutates original bm (triangulates it)
-        so the triangulation edges will be shown too
-        """
-        traingulated_bm = bm
-        bmesh.ops.triangulate(traingulated_bm, faces=traingulated_bm.faces)
-
-        face_indices = [[v.index for v in f.verts] for f in traingulated_bm.faces]
-        faces_color = transparent_color(self.addon_prefs.decorator_color_special)
-        self.draw_batch("TRIS", vertices_coords, faces_color, face_indices)
+        """Submit a non-mutating beauty-triangulated TRIS batch over ``bm``'s faces."""
+        faces_color = tool.Blender.transparent_color(self.addon_prefs.decorator_color_special)
+        tool.Blender.draw_bmesh_face_tris(bm, vertices_coords, faces_color, self.draw_batch)
 
     def __call__(self, context, get_custom_bmesh=None, draw_faces=False, exit_edit_mode_callback=None):
         self.addon_prefs = tool.Blender.get_addon_preferences()
@@ -133,13 +122,15 @@ class SystemDecorator:
         self.shader = gpu.shader.from_builtin("UNIFORM_COLOR")
         self.shader.bind()
 
-        self.draw_batch("LINES", all_vertices, transparent_color(unselected_elements_color), unselected_edges)
+        self.draw_batch(
+            "LINES", all_vertices, tool.Blender.transparent_color(unselected_elements_color), unselected_edges
+        )
         self.draw_batch("LINES", all_vertices, selected_elements_color, selected_edges)
         self.draw_batch("LINES", all_vertices, UNSPECIAL_ELEMENT_COLOR, arc_edges)
         self.draw_batch("LINES", all_vertices, special_elements_color, preview_edges)
         self.draw_batch("LINES", all_vertices, special_elements_color, roof_angle_edges)
 
-        self.draw_batch("POINTS", unselected_vertices, transparent_color(unselected_elements_color, 0.5))
+        self.draw_batch("POINTS", unselected_vertices, tool.Blender.transparent_color(unselected_elements_color, 0.5))
         self.draw_batch("POINTS", error_vertices, ERROR_ELEMENTS_COLOR)
         self.draw_batch("POINTS", special_vertices, special_elements_color)
         self.draw_batch("POINTS", selected_vertices, selected_elements_color)

src/bonsai/bonsai/bim/module/system/operator.py

@@ -317,13 +317,23 @@ class MEPConnectElements(bpy.types.Operator, tool.Ifc.Operator):
     bl_label = "Connect MEP Elements"
     bl_description = "Connects two selected elements by their closest located ports and adjusts them"
     bl_options = {"REGISTER", "UNDO"}
-    obj1_name: bpy.props.StringProperty(name="Object 1")
-    obj2_name: bpy.props.StringProperty(name="Object 2")
+    obj1_guid: bpy.props.StringProperty(name="Object 1 GlobalId")
+    obj2_guid: bpy.props.StringProperty(name="Object 2 GlobalId")
 
     def _execute(self, context):
-        if self.obj1_name and self.obj2_name:
-            obj1 = bpy.data.objects.get(self.obj1_name)
-            obj2 = bpy.data.objects.get(self.obj2_name)
+        if self.obj1_guid and self.obj2_guid:
+            ifc_file = tool.Ifc.get()
+            try:
+                el1_lookup = ifc_file.by_guid(self.obj1_guid)
+                el2_lookup = ifc_file.by_guid(self.obj2_guid)
+            except RuntimeError:
+                self.report({"ERROR"}, "Could not resolve MEP elements from supplied GlobalIds.")
+                return {"CANCELLED"}
+            obj1 = tool.Ifc.get_object(el1_lookup)
+            obj2 = tool.Ifc.get_object(el2_lookup)
+            if not obj1 or not obj2:
+                self.report({"ERROR"}, "Supplied MEP elements have no Blender object bound.")
+                return {"CANCELLED"}
         else:
             if not context.selected_objects or len(context.selected_objects) != 2:
                 self.report({"ERROR"}, "Need to select 2 objects.")

src/bonsai/bonsai/bim/module/type/operator.py

@@ -65,10 +65,28 @@ class AssignType(bpy.types.Operator, tool.Ifc.Operator):
             if active_drawing:
                 active_target_view = tool.Drawing.get_drawing_target_view(active_drawing)
 
+        compatible: list[tuple[bpy.types.Object, ifcopenshell.entity_instance]] = []
+        skipped_classes: set[str] = set()
         for obj in related_objects:
             element = tool.Ifc.get_entity(obj)
             if not element or not element.is_a("IfcObject"):
                 continue
+            if not tool.Type.is_relating_type_compatible(element, relating_type):
+                skipped_classes.add(element.is_a())
+                continue
+            compatible.append((obj, element))
+
+        if skipped_classes:
+            self.report(
+                {"WARNING"},
+                f"Skipped {', '.join(sorted(skipped_classes))}: not a valid occurrence for " f"{relating_type.is_a()}.",
+            )
+
+        if not compatible:
+            self.report({"ERROR"}, f"No selected object can be typed by {relating_type.is_a()}.")
+            return {"CANCELLED"}
+
+        for obj, element in compatible:
             core.assign_type(tool.Ifc, tool.Model, tool.Type, element=element, type=relating_type)
 
             # Switch to the drawing's target view if available
@@ -376,12 +394,22 @@ class DuplicateType(bpy.types.Operator, tool.Ifc.Operator):
         if self.assign_selected_objects:
             selected_objects = tool.Blender.get_selected_objects()
             prefs = tool.Blender.get_addon_preferences()
+            skipped_classes: set[str] = set()
             for selected_obj in selected_objects:
                 selected_element = tool.Ifc.get_entity(selected_obj)
-                if selected_element and selected_element.is_a("IfcObject"):
-                    core.assign_type(tool.Ifc, tool.Model, tool.Type, element=selected_element, type=new)
-                    if prefs.occurrence_name_style == "TYPE":
-                        selected_obj.name = tool.Model.generate_occurrence_name(new, selected_element.is_a())
+                if not selected_element or not selected_element.is_a("IfcObject"):
+                    continue
+                if not tool.Type.is_relating_type_compatible(selected_element, new):
+                    skipped_classes.add(selected_element.is_a())
+                    continue
+                core.assign_type(tool.Ifc, tool.Model, tool.Type, element=selected_element, type=new)
+                if prefs.occurrence_name_style == "TYPE":
+                    selected_obj.name = tool.Model.generate_occurrence_name(new, selected_element.is_a())
+            if skipped_classes:
+                self.report(
+                    {"WARNING"},
+                    f"Skipped {', '.join(sorted(skipped_classes))}: not a valid occurrence for " f"{new.is_a()}.",
+                )
 
         if obj in context.selectable_objects:
             tool.Blender.select_and_activate_single_object(context, new_obj)

src/bonsai/bonsai/bim/module/void/operator.py

@@ -26,7 +26,7 @@ import bonsai.bim.handler
 import bonsai.core.geometry
 import bonsai.core.root
 import bonsai.tool as tool
-from bonsai.bim.module.model.opening import FilledOpeningGenerator
+from bonsai.bim.module.model.opening import FilledOpeningGenerator, is_filling_supported
 
 
 class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
@@ -34,11 +34,21 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
     bl_label = "Apply Opening"
     bl_options = {"REGISTER", "UNDO"}
     bl_description = (
-        "Apply opening objects to an Element.\n\n"
-        "The Element and the openings to be applied should be selected. The order of selection is not important.\n"
-        "Opening can be just a Blender mesh object."
+        "Cuts openings in a wall, slab, or roof using selected shape objects — "
+        "doors, windows, existing openings, or plain (non-IFC) meshes. "
+        "Selection order doesn't matter.\n\n"
+        "Doors and windows also fill the opening. Other IFC classes are currently "
+        "unsupported by the opening generator and get skipped with a warning.\n\n"
+        "Shift+click: keep each opening at its shape object's current position "
+        "instead of snapping to the wall."
     )
 
+    # Toggled by ``invoke`` when the user holds SHIFT during a gizmo / hotkey
+    # click. The filling-opening generator gates its snap-to-wall-axis block
+    # on this flag. HIDDEN + SKIP_SAVE so the flag doesn't surface in the F6
+    # redo panel or persist into saved keymaps.
+    preserve_placement: bpy.props.BoolProperty(default=False, options={"HIDDEN", "SKIP_SAVE"})
+
     @classmethod
     def poll(cls, context):
         if len(context.selected_objects) < 2:
@@ -46,7 +56,17 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
             return False
         return True
 
+    def invoke(self, context, event):
+        self.preserve_placement = bool(event.shift)
+        return self.execute(context)
+
     def _execute(self, context):
+        # Multi-opening drops on the same host fan out N update_representation
+        # writes + N switch_representation recuts without batching. Coalesce.
+        with tool.Geometry.batch_host_recut():
+            return self._add_openings(context)
+
+    def _add_openings(self, context):
         selected_objects = context.selected_objects
         target_object = selected_objects[0]
 
@@ -66,9 +86,20 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
                     self.report({"INFO"}, "You can't add an opening to another opening.")
                     continue
                 elif not element1.is_a("IfcOpeningElement") and not element2.is_a("IfcOpeningElement"):
-                    if element1.is_a("IfcWindow") or element1.is_a("IfcDoor"):  # Add a fill to an element.
+                    if is_filling_supported(element1):  # Add a fill to an element.
                         obj1, obj2 = obj2, obj1
-                    FilledOpeningGenerator().generate(obj2, obj1, target=obj2.matrix_world.translation)
+                    elif not is_filling_supported(element2):
+                        self.report(
+                            {"INFO"},
+                            f"Cannot apply {element2.is_a()} as an opening — Bonsai currently supports only IfcDoor and IfcWindow as parametric fillings.",
+                        )
+                        continue
+                    FilledOpeningGenerator().generate(
+                        obj2,
+                        obj1,
+                        target=obj2.matrix_world.translation,
+                        preserve_placement=self.preserve_placement,
+                    )
                     continue
                 elif element1.is_a("IfcOpeningElement") or element2.is_a("IfcOpeningElement"):
                     if element1.is_a("IfcOpeningElement"):  # Reassign an opening to another element.
@@ -148,7 +179,7 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
                             voided_obj.scale = (1.0, 1.0, 1.0)
                             tool.Ifc.finish_edit(voided_obj)
                         else:
-                            bpy.ops.bim.update_representation(obj=voided_obj.name)
+                            tool.Geometry.update_host_representation(voided_obj)
 
                     if tool.Ifc.is_moved(voided_obj):
                         bonsai.core.geometry.edit_object_placement(
@@ -157,12 +188,7 @@ class AddOpening(bpy.types.Operator, tool.Ifc.Operator):
 
                     representation = tool.Geometry.get_active_representation(voided_obj)
                     assert representation
-                    bonsai.core.geometry.switch_representation(
-                        tool.Ifc,
-                        tool.Geometry,
-                        obj=voided_obj,
-                        representation=representation,
-                    )
+                    tool.Geometry.recut_host(voided_obj, representation)
                 tool.Geometry.lock_scale(voided_obj)
 
             if not has_visible_openings:
@@ -200,12 +226,7 @@ class RemoveOpening(bpy.types.Operator, tool.Ifc.Operator):
             if building_obj and building_obj.data:
                 representation = tool.Geometry.get_active_representation(building_obj)
                 assert representation
-                bonsai.core.geometry.switch_representation(
-                    tool.Ifc,
-                    tool.Geometry,
-                    obj=building_obj,
-                    representation=representation,
-                )
+                tool.Geometry.recut_host(building_obj, representation)
         tool.Geometry.unlock_scale_object_with_openings(obj)
         tool.Geometry.clear_cache(element)
         return {"FINISHED"}

src/bonsai/bonsai/bim/parametric_lifecycle.py

@@ -61,7 +61,7 @@ Pattern selection (which approach a new feature should adopt):
     The authoritative list of registered parametric types — and which use
     `build_edit_lifecycle` vs. standalone operators — lives in
     `tool/parametric.py`'s `EDIT_TYPES` and is enforced by the registry
-    contract tests in `test/bim/test_parametric_registry.py`.
+    contract tests.
 
 This module hosts operator-side mixins that import ``bonsai.tool`` freely.
 The lightweight parametric registry consumed at addon-enable time must stay
@@ -528,6 +528,51 @@ class PickTypeMixin(TypeAccessorBase):
         return {"FINISHED"}
 
 
+class IntegerInputDialogMixin:
+    """Operator mixin that mirrors a per-feature ``IntProperty`` on the
+    operator into a draft attribute on the active object's parametric props,
+    via Blender's ``invoke_props_dialog`` popup.
+
+    Subclasses declare:
+
+    - ``attr_name`` — name of the IntProperty on the subclass AND of the
+      attribute on the resolved props (same name on both sides).
+    - ``props_getter`` — ``staticmethod(tool.Model.get_<feature>_props)``.
+    - ``requires_editing`` — True iff the operator must no-op outside an
+      active edit lifecycle. Default False.
+    - ``value_min`` — minimum value to clamp to. Default 1."""
+
+    attr_name: ClassVar[str] = ""
+    props_getter: ClassVar[Callable[[bpy.types.Object], bpy.types.PropertyGroup]]
+    requires_editing: ClassVar[bool] = False
+    value_min: ClassVar[int] = 1
+
+    def _resolve_props(self, context: bpy.types.Context) -> bpy.types.PropertyGroup | None:
+        """Return the active object's parametric props if the operator is
+        allowed to fire, ``None`` otherwise (caller bails with ``CANCELLED``)."""
+        obj = context.active_object
+        if not obj:
+            return None
+        props = self.props_getter(obj)
+        if self.requires_editing and not props.is_editing:
+            return None
+        return props
+
+    def invoke(self, context: bpy.types.Context, event: bpy.types.Event) -> set[str]:  # noqa: ARG002
+        props = self._resolve_props(context)
+        if props is None:
+            return {"CANCELLED"}
+        setattr(self, self.attr_name, max(self.value_min, getattr(props, self.attr_name)))
+        return context.window_manager.invoke_props_dialog(self)
+
+    def execute(self, context: bpy.types.Context) -> set[str]:
+        props = self._resolve_props(context)
+        if props is None:
+            return {"CANCELLED"}
+        setattr(props, self.attr_name, max(self.value_min, getattr(self, self.attr_name)))
+        return {"FINISHED"}
+
+
 # --- Undo-resync registry ----------------------------------------------------
 #
 # Per-type regenerators called from ``resync_parametric_drafts_after_undo``

src/bonsai/bonsai/bim/ui.py

@@ -39,21 +39,10 @@ from natsort import natsorted
 import bonsai.bim
 import bonsai.bim.helper
 import bonsai.tool as tool
+from bonsai.bim.ifc import is_cache_locked_by_other_process
 from bonsai.bim.module.bsdd.prop import BIMBSDDProperties, BSDDProperty
-from bonsai.bim.module.model.prop import (
-    BIMDoorProperties,
-    BIMRailingProperties,
-    BIMRoofProperties,
-    BIMStairProperties,
-    BIMWindowProperties,
-)
-from bonsai.bim.module.model.ui import (
-    draw_door_properties,
-    draw_railing_properties,
-    draw_roof_properties,
-    draw_stair_properties,
-    draw_window_properties,
-)
+from bonsai.bim.module.model import prop as _model_prop
+from bonsai.bim.module.model import ui as _model_ui
 from bonsai.bim.module.pset.prop import IfcProperty
 from bonsai.bim.prop import Attribute
 
@@ -275,202 +264,32 @@ class BIM_UL_panel_visibilities(bpy.types.UIList):
         row.prop(item, "is_bookmarked", text="", icon="SOLO_ON" if item.is_bookmarked else "SOLO_OFF", emboss=False)
 
 
-class GizmoPreferencesDoor(bpy.types.PropertyGroup):
-    """Property group for door gizmo visibility settings."""
-
-    overall_height: BoolProperty(name="Overall Height", default=True)
-    overall_width: BoolProperty(name="Overall Width", default=True)
-    threshold_thickness: BoolProperty(name="Threshold Thickness", default=True)
-    threshold_depth: BoolProperty(name="Threshold Depth", default=True)
-    threshold_offset: BoolProperty(name="Threshold Offset", default=True)
-    lining_offset: BoolProperty(name="Lining Offset", default=True)
-    lining_depth: BoolProperty(name="Lining Depth", default=True)
-    lining_thickness: BoolProperty(name="Lining Thickness", default=True)
-    transom_offset: BoolProperty(name="Transom Offset", default=True)
-    transom_thickness: BoolProperty(name="Transom Thickness", default=True)
-    casing_thickness: BoolProperty(name="Casing Thickness", default=True)
-    casing_depth: BoolProperty(name="Casing Depth", default=True)
-    swing_arc: BoolProperty(name="Swing Arc", default=True, description="Show door swing direction arc")
-    flip_arc: BoolProperty(name="Flip Arc", default=True, description="Show flip door orientation arc")
-
-    if TYPE_CHECKING:
-        overall_height: bool
-        overall_width: bool
-        threshold_thickness: bool
-        threshold_depth: bool
-        threshold_offset: bool
-        lining_offset: bool
-        lining_depth: bool
-        lining_thickness: bool
-        transom_offset: bool
-        transom_thickness: bool
-        casing_thickness: bool
-        casing_depth: bool
-        swing_arc: bool
-        flip_arc: bool
-
-
-class GizmoPreferencesWindow(bpy.types.PropertyGroup):
-    """Property group for window gizmo visibility settings."""
-
-    overall_height: BoolProperty(name="Overall Height", default=True)
-    overall_width: BoolProperty(name="Overall Width", default=True)
-    lining_offset: BoolProperty(name="Lining Offset", default=True)
-    lining_depth: BoolProperty(name="Lining Depth", default=True)
-    lining_thickness: BoolProperty(name="Lining Thickness", default=True)
-    lining_to_panel_offset_x: BoolProperty(name="Lining to Panel Offset X", default=True)
-    lining_to_panel_offset_y: BoolProperty(name="Lining to Panel Offset Y", default=True)
-    frame_depth: BoolProperty(name="Frame Depth", default=True)
-    frame_thickness: BoolProperty(name="Frame Thickness", default=True)
-    mullion_thickness: BoolProperty(name="Mullion Thickness", default=True)
-    first_mullion_offset: BoolProperty(name="First Mullion Offset", default=True)
-    second_mullion_offset: BoolProperty(name="Second Mullion Offset", default=True)
-    transom_thickness: BoolProperty(name="Transom Thickness", default=True)
-    first_transom_offset: BoolProperty(name="First Transom Offset", default=True)
-    second_transom_offset: BoolProperty(name="Second Transom Offset", default=True)
-
-    if TYPE_CHECKING:
-        overall_height: bool
-        overall_width: bool
-        lining_offset: bool
-        lining_depth: bool
-        lining_thickness: bool
-        lining_to_panel_offset_x: bool
-        lining_to_panel_offset_y: bool
-        frame_depth: bool
-        frame_thickness: bool
-        mullion_thickness: bool
-        first_mullion_offset: bool
-        second_mullion_offset: bool
-        transom_thickness: bool
-        first_transom_offset: bool
-        second_transom_offset: bool
-
-
-class GizmoPreferencesStair(bpy.types.PropertyGroup):
-    """Property group for stair gizmo visibility settings."""
-
-    width: BoolProperty(name="Width", default=True)
-    height: BoolProperty(name="Height", default=True)
-    tread_run: BoolProperty(name="Tread Run", default=True)
-    tread_depth: BoolProperty(name="Tread Depth", default=True)
-    riser_height: BoolProperty(name="Riser Height", default=True)
-    nosing_length: BoolProperty(name="Nosing Length", default=True)
-    nosing_depth: BoolProperty(name="Nosing Depth", default=True)
-    total_length_target: BoolProperty(name="Total Length Target", default=True)
-    base_slab_depth: BoolProperty(name="Base Slab Depth", default=True)
-    top_slab_depth: BoolProperty(name="Top Slab Depth", default=True)
-    lock: BoolProperty(name="Total Length Lock", default=True)
-    plus: BoolProperty(name="Add Tread (+)", default=True)
-    minus: BoolProperty(name="Remove Tread (-)", default=True)
-    cycle: BoolProperty(name="Cycle Stair Type", default=True)
-
-    if TYPE_CHECKING:
-        width: bool
-        height: bool
-        tread_run: bool
-        tread_depth: bool
-        riser_height: bool
-        nosing_length: bool
-        nosing_depth: bool
-        total_length_target: bool
-        base_slab_depth: bool
-        top_slab_depth: bool
-        lock: bool
-        plus: bool
-        minus: bool
-        cycle: bool
-
-
-class GizmoPreferencesWall(bpy.types.PropertyGroup):
-    """Property group for wall gizmo visibility settings."""
-
-    length: BoolProperty(
-        name="Length",
-        default=True,
-        description="Show the length dimension gizmo along the wall axis.",
-    )
-    height: BoolProperty(
-        name="Height",
-        default=True,
-        description="Show the height dimension gizmo at the wall's start endpoint.",
-    )
-    height_end: BoolProperty(
-        name="Height (far end, walls > 5m)",
-        default=True,
-        description=(
-            "Show a second height gizmo at the wall's far end so long walls don't "
-            "require panning to reach the handle."
-        ),
-    )
-    x_angle: BoolProperty(
-        name="Slope",
-        default=True,
-        description="Show the slope gizmo at the wall top measuring horizontal displacement of the top face.",
-    )
-    cycle: BoolProperty(
-        name="Cycle Offset Baseline",
-        default=True,
-        description="Show the baseline-state icon (Exterior / Centreline / Interior) in the editing icon row.",
-    )
-    scissors: BoolProperty(
-        name="Split at cursor",
-        default=True,
-        description="Show the split icon at the 3D cursor when it lies within the wall's length range.",
-    )
-    extend: BoolProperty(
-        name="Extend length to cursor X",
-        default=True,
-        description="Show the extend-length icon at the 3D cursor's projected wall-axis X.",
-    )
-    extend_height: BoolProperty(
-        name="Extend height to cursor Z",
-        default=True,
-        description="Show the extend-height icon at the 3D cursor's Z, on the wall axis.",
-    )
-    rotate: BoolProperty(
-        name="Rotate 90°",
-        default=True,
-        description="Show the rotate-90 icon in the editing icon row (rotates the wall around its Z axis).",
-    )
-    toggle_openings: BoolProperty(
-        name="Toggle Openings",
-        default=True,
-        description="Show the toggle-openings icon next to the pen (toggles opening fill visibility in the viewport).",
-    )
-
-    if TYPE_CHECKING:
-        length: bool
-        height: bool
-        height_end: bool
-        x_angle: bool
-        cycle: bool
-        scissors: bool
-        extend: bool
-        extend_height: bool
-        rotate: bool
-        toggle_openings: bool
-
-
 class GizmoPreferences(bpy.types.PropertyGroup):
-    """Property group for all gizmo visibility settings."""
+    """Aggregator for parametric gizmo visibility settings. One flat bool per
+    parametric feature; controls whether that feature's gizmo group polls
+    visible in the viewport.
+
+    The per-feature ``<name>: BoolProperty`` fields are derived from
+    ``tool.Parametric.EDIT_TYPES`` at module load — adding a new parametric
+    type to the registry automatically surfaces its toggle here, with no
+    parallel hand-maintained list to keep in sync."""
 
     draw_gizmos_in_3d_viewport: BoolProperty(
         name="Draw Gizmos In 3D Viewport",
         default=True,
         description="Show interactive gizmos in the 3D viewport for parametric elements",
     )
-    door: bpy.props.PointerProperty(type=GizmoPreferencesDoor)
-    window: bpy.props.PointerProperty(type=GizmoPreferencesWindow)
-    stair: bpy.props.PointerProperty(type=GizmoPreferencesStair)
-    wall: bpy.props.PointerProperty(type=GizmoPreferencesWall)
 
     if TYPE_CHECKING:
         draw_gizmos_in_3d_viewport: bool
-        door: GizmoPreferencesDoor
-        window: GizmoPreferencesWindow
-        stair: GizmoPreferencesStair
-        wall: GizmoPreferencesWall
+
+
+for _gizmo_pref_entry in tool.Parametric.EDIT_TYPES:
+    GizmoPreferences.__annotations__[_gizmo_pref_entry.name] = BoolProperty(
+        name=_gizmo_pref_entry.name.replace("_", " ").title(),
+        default=True,
+    )
+del _gizmo_pref_entry
 
 
 class DocPreferences(bpy.types.PropertyGroup):
@@ -566,11 +385,22 @@ class DocPreferences(bpy.types.PropertyGroup):
 
 
 class DefaultParameters(bpy.types.PropertyGroup):
-    door: bpy.props.PointerProperty(type=BIMDoorProperties)
-    window: bpy.props.PointerProperty(type=BIMWindowProperties)
-    railing: bpy.props.PointerProperty(type=BIMRailingProperties)
-    roof: bpy.props.PointerProperty(type=BIMRoofProperties)
-    stair: bpy.props.PointerProperty(type=BIMStairProperties)
+    """Per-type preset values used to seed new parametric instances.
+
+    The ``<name>: PointerProperty`` fields are derived from the subset of
+    ``tool.Parametric.EDIT_TYPES`` flagged ``has_default_parameters=True``,
+    each pointing at the matching ``BIM<Name>Properties`` class. Adding a
+    new entry with that flag automatically surfaces a preferences section
+    and gives the create operator a preset to copy from."""
+
+
+for _default_params_entry in tool.Parametric.EDIT_TYPES:
+    if not _default_params_entry.has_default_parameters:
+        continue
+    DefaultParameters.__annotations__[_default_params_entry.name] = bpy.props.PointerProperty(
+        type=getattr(_model_prop, _default_params_entry.props_attr),
+    )
+del _default_params_entry
 
 
 class BIM_ADDON_preferences(bpy.types.AddonPreferences):
@@ -682,6 +512,15 @@ class BIM_ADDON_preferences(bpy.types.AddonPreferences):
         size=4,
         description="Color of not selected verts/edges (used in profile editing mode)",
     )
+    clip_box_cap_color: bpy.props.FloatVectorProperty(
+        name="Clip Box Caps Color",
+        subtype="COLOR",
+        default=(0.0, 0.0, 0.0, 1.0),
+        min=0.0,
+        max=1.0,
+        size=4,
+        description="Fill color of clip-box cross-section caps",
+    )
     decorator_color_special: bpy.props.FloatVectorProperty(
         name="Special Elements Color",
         subtype="COLOR",
@@ -738,6 +577,43 @@ class BIM_ADDON_preferences(bpy.types.AddonPreferences):
     should_disable_undo_on_save: BoolProperty(
         name="Disable Undo When Saving (Faster saves, no undo for you!)", default=False
     )
+
+    def update_autosave_settings(self, context: bpy.types.Context) -> None:
+        if self.autosave_enabled:
+            tool.Autosave.reset_timer()
+        else:
+            tool.Autosave.cancel_timer()
+
+    autosave_enabled: BoolProperty(
+        name="Enable IFC Autosave Timer",
+        description="Periodically remind you to save or automatically create a backup copy of the IFC file",
+        default=False,
+        update=update_autosave_settings,
+    )
+    autosave_interval_minutes: bpy.props.IntProperty(
+        name="Autosave Interval (Minutes)",
+        description="Time between autosave reminders or backups. The timer resets whenever you open or save a project",
+        default=10,
+        min=1,
+        max=1440,
+        update=update_autosave_settings,
+    )
+    autosave_mode: bpy.props.EnumProperty(
+        name="Autosave Mode",
+        items=[
+            (
+                "PROMPT",
+                "Prompt to Save",
+                "Show a dialog offering to save the IFC project when the timer expires",
+            ),
+            (
+                "BACKUP",
+                "Automatic Backup",
+                "Save a backup copy as filename_autosaved.ifc when the timer expires",
+            ),
+        ],
+        default="PROMPT",
+    )
     should_stream: BoolProperty(name="Stream Data From IFC-SPF (Only for advanced users)", default=False)
     should_always_cache: BoolProperty(
         name="Always Cache Geometry",
@@ -850,6 +726,9 @@ class BIM_ADDON_preferences(bpy.types.AddonPreferences):
         bsdd_load_test_dictionaries: bool
         bsdd_baseurl: str
         should_disable_undo_on_save: bool
+        autosave_enabled: bool
+        autosave_interval_minutes: int
+        autosave_mode: Literal["PROMPT", "BACKUP"]
         should_stream: bool
         should_always_cache: bool
         occurrence_name_style: Literal["CLASS", "TYPE", "CUSTOM"]
@@ -918,61 +797,13 @@ class BIM_ADDON_preferences(bpy.types.AddonPreferences):
             )
 
     def draw_gizmo_parameters(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
+        """Render one enabled-toggle per parametric feature."""
         layout.label(text="Toggle visibility of gizmos in editing mode")
         box = layout.box()
-        bonsai.bim.helper.draw_expandable_panel(box, context, "Parametric Door", self.draw_door_gizmo_parameters)
-        bonsai.bim.helper.draw_expandable_panel(box, context, "Parametric Window", self.draw_window_gizmo_parameters)
-        bonsai.bim.helper.draw_expandable_panel(box, context, "Parametric Stair", self.draw_stair_gizmo_parameters)
-        bonsai.bim.helper.draw_expandable_panel(box, context, "Parametric Wall", self.draw_wall_gizmo_parameters)
-
-    def _draw_parametric_gizmo_parameters(
-        self,
-        layout: bpy.types.UILayout,
-        gizmo_pg: bpy.types.PropertyGroup,
-        dimension_gizmo_class: type,
-        special_gizmo_names: frozenset[str] = frozenset(),
-    ) -> None:
-        """Draw the per-element gizmo visibility toggles. Surfaces every annotation
-        on ``gizmo_pg`` that either maps to one of ``dimension_gizmo_class``'s
-        dimension gizmos or is named in ``special_gizmo_names`` (non-dimension icons
-        like baseline cycle, scissors, rotate, …)."""
-        visible_names = {p.attr_name for p in dimension_gizmo_class.dimension_gizmo_props} | special_gizmo_names
-        try:
-            annotations = gizmo_pg.__annotations__
-        except AttributeError:
-            annotations = type(gizmo_pg).__annotations__
-        for prop in annotations:
-            if prop in visible_names:
-                layout.prop(gizmo_pg, prop)
-
-    def draw_door_gizmo_parameters(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
-        from bonsai.bim.module.model.door import GizmoDoorEdition
-
-        self._draw_parametric_gizmo_parameters(
-            layout, self.gizmos.door, GizmoDoorEdition, frozenset({"swing_arc", "flip_arc"})
-        )
-
-    def draw_window_gizmo_parameters(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
-        from bonsai.bim.module.model.window import GizmoWindowEdition
-
-        self._draw_parametric_gizmo_parameters(layout, self.gizmos.window, GizmoWindowEdition)
-
-    def draw_stair_gizmo_parameters(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
-        from bonsai.bim.module.model.stair import GizmoStairEdition
-
-        self._draw_parametric_gizmo_parameters(
-            layout, self.gizmos.stair, GizmoStairEdition, frozenset({"lock", "plus", "minus", "cycle"})
-        )
-
-    def draw_wall_gizmo_parameters(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
-        from bonsai.bim.module.model.wall import GizmoWallEdition
-
-        self._draw_parametric_gizmo_parameters(
-            layout,
-            self.gizmos.wall,
-            GizmoWallEdition,
-            frozenset({"cycle", "scissors", "extend", "extend_height", "rotate", "toggle_openings"}),
-        )
+        annotations = type(self.gizmos).__annotations__
+        for feature in tool.Parametric.EDIT_TYPES:
+            if feature.name in annotations:
+                box.prop(self.gizmos, feature.name)
 
     def draw_model_settings(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
         layout.prop(self, "occurrence_name_style")
@@ -1019,43 +850,39 @@ class BIM_ADDON_preferences(bpy.types.AddonPreferences):
         layout.row().prop(self, "decorator_color_special")
         layout.row().prop(self, "decorator_color_error")
         layout.row().prop(self, "decorator_color_background")
+        bonsai.bim.helper.draw_expandable_panel(
+            layout,
+            context,
+            "Clip Box",
+            self.draw_clip_box_colors,
+        )
+
+    def draw_clip_box_colors(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
+        layout.row().prop(self, "clip_box_cap_color")
 
     def draw_default_parameters(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
         box = layout.box()
-        bonsai.bim.helper.draw_expandable_panel(
-            box,
-            context,
-            "Door",
-            lambda _layout, _context: draw_door_properties(_layout, self.default_parameters.door),
-        )
-        bonsai.bim.helper.draw_expandable_panel(
-            box,
-            context,
-            "Window",
-            lambda _layout, _context: draw_window_properties(_layout, self.default_parameters.window),
-        )
-        bonsai.bim.helper.draw_expandable_panel(
-            box,
-            context,
-            "Railing",
-            lambda _layout, _context: draw_railing_properties(_layout, self.default_parameters.railing),
-        )
-        bonsai.bim.helper.draw_expandable_panel(
-            box,
-            context,
-            "Roof",
-            lambda _layout, _context: draw_roof_properties(_layout, self.default_parameters.roof),
-        )
-        bonsai.bim.helper.draw_expandable_panel(
-            box,
-            context,
-            "Stair",
-            lambda _layout, _context: draw_stair_properties(_layout, self.default_parameters.stair),
-        )
+        for entry in tool.Parametric.EDIT_TYPES:
+            if not entry.has_default_parameters:
+                continue
+            props = getattr(self.default_parameters, entry.name)
+            draw_props = getattr(_model_ui, f"draw_{entry.name}_properties")
+            bonsai.bim.helper.draw_expandable_panel(
+                box,
+                context,
+                entry.name.replace("_", " ").title(),
+                lambda _layout, _context, _draw=draw_props, _props=props: _draw(_layout, _props),
+            )
 
     def draw_other_settings(self, layout: bpy.types.UILayout, context: bpy.types.Context) -> None:
         layout.prop(self, "opening_focus_opacity")
         layout.prop(self, "should_disable_undo_on_save")
+        layout.separator()
+        layout.label(text="Autosave:")
+        layout.prop(self, "autosave_enabled")
+        if self.autosave_enabled:
+            layout.prop(self, "autosave_interval_minutes")
+            layout.prop(self, "autosave_mode")
         layout.prop(self, "should_stream")
         layout.prop(self, "should_always_cache")
         layout.label(text="bSDD:")
@@ -1169,6 +996,50 @@ class BIM_PT_tabs(Panel):
             op.uri = "https://docs.bonsaibim.org/guides/troubleshooting.html#saving-and-loading-blend-files"
             row.operator("bim.close_blend_warning", text="", icon="CANCEL")
 
+        if is_cache_locked_by_other_process():
+            box = self.layout.box()
+            box.alert = True
+            row = box.row(align=True)
+            row.label(text="IFC Already Open in Another Blender Instance", icon="ERROR")
+            row.operator("bim.dismiss_multi_instance_warning", text="", icon="CANCEL")
+            draw_multiline_text(
+                box.column(align=True),
+                "This file is open in another Blender instance. Editing the same "
+                "IFC from two instances at once can lose your work or display "
+                "outdated geometry. Close the other Blender instances to continue safely.",
+                context=context,
+            )
+
+        pprops = tool.Project.get_project_props()
+        if pending := pprops.pending_opening_recut:
+            box = self.layout.box()
+            box.alert = True
+            box.label(text="Opening Cuts Skipped", icon="ERROR")
+            draw_multiline_text(
+                box.column(align=True),
+                f"{len(pending)} element(s) had too many openings to cut during load. "
+                f"Apply to recompute their meshes, or dismiss to leave them as they are.",
+                context=context,
+            )
+            row = box.row(align=True)
+            row.operator("bim.select_pending_opening_cuts", text="Select Elements", icon="RESTRICT_SELECT_OFF")
+            row.operator("bim.apply_pending_opening_cuts", text="Apply Openings", icon="PLAY")
+            row.operator("bim.dismiss_pending_opening_cuts", text="", icon="CANCEL")
+
+        if pending := pprops.pending_array_repair:
+            box = self.layout.box()
+            box.alert = True
+            box.label(text="Arrays With Missing Children", icon="ERROR")
+            draw_multiline_text(
+                box.column(align=True),
+                f"{len(pending)} array parent(s) reference child GUIDs that don't exist in this file. "
+                f"The arrays loaded incomplete. Select to inspect, or dismiss.",
+                context=context,
+            )
+            row = box.row(align=True)
+            row.operator("bim.select_pending_array_repair", text="Select Elements", icon="RESTRICT_SELECT_OFF")
+            row.operator("bim.dismiss_pending_array_repair", text="", icon="CANCEL")
+
         gprops = tool.Geometry.get_geometry_props()
         # Check that Blender mode and IFC Mode do match.
         if context.mode == "OBJECT" and gprops.mode in ("OBJECT", "ITEM"):
@@ -2120,6 +1991,7 @@ class BIM_PT_decorators_overlay(Panel):
         aggregate_props = tool.Aggregate.get_aggregate_props()
         nest_props = tool.Nest.get_nest_props()
         model_props = tool.Model.get_model_props()
+        system_props = tool.System.get_system_props()
         display_all = overlay.show_overlays
 
         col = layout.column()
@@ -2137,10 +2009,20 @@ class BIM_PT_decorators_overlay(Panel):
         row = col.row(align=True)
         row.prop(model_props, "show_slab_direction", text="Slab Direction")
         row = col.row(align=True)
+        row.prop(model_props, "show_paths", text="Element Paths")
+        row.prop(system_props, "should_draw_decorations", text="System Decorations")
+        row = col.row(align=True)
         row.prop(model_props, "show_bounding_box", text="Bounding Box Dimensions")
         row = col.row(align=True)
         row.prop(model_props, "show_cut_decorator", text="Cut Decorator")
         row.prop(model_props, "show_cut_decorator_fill", text="Fill Cut Decorator")
+        clip_box_props = tool.ClipBox.get_scene_props(context.scene)
+        row = col.row(align=True)
+        # Grey out the toggles when there is no clip box to act on, so the
+        # user can see the controls but can't flip a switch that does nothing.
+        row.enabled = bool(clip_box_props.clip_boxes)
+        row.prop(clip_box_props, "enabled", text="Enable Clipping")
+        row.prop(clip_box_props, "show_caps", text="Show Caps")
 
 
 class BIM_PT_snappping(Panel):

src/bonsai/bonsai/core/connection.py

@@ -0,0 +1,113 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+"""Shared post-disconnect cleanup dispatch.
+
+Used by both ``bim.disconnect_elements`` (explicit user disconnect) and the
+connection cascade in ``tool.Geometry.delete_ifc_object`` (implicit
+disconnect-on-delete). Each kind returned by
+:py:meth:`bonsai.tool.connection.Connection.find_rels` /
+:py:meth:`find_rels_for_element` maps to a single arm here, so adding a new
+kind means extending one dispatch table — both call sites benefit
+automatically and the AST forward-compat guard enforces coverage.
+
+The ``subject`` parameter is the entity whose teardown effects the
+disconnect: for ``"path"`` / ``"element"`` / ``"element-top"`` kinds it
+carries an ``IfcRel*`` relationship entity (the rel that gets removed);
+for ``"mep-pair-fitting"`` it carries an ``IfcFlowFitting`` (the fitting
+that gets deleted). The slot is uniform on intent — the dispatch decides
+the teardown mechanism by kind.
+"""
+
+from __future__ import annotations
+
+from typing import TYPE_CHECKING
+
+import bonsai.core.geometry
+from bonsai.core.model import regenerate_wall_to_underside
+
+if TYPE_CHECKING:
+    import ifcopenshell
+
+    import bonsai.tool as tool
+
+
+def disconnect_rel(
+    ifc: type[tool.Ifc],
+    geometry: type[tool.Geometry],
+    model: type[tool.Model],
+    connection: type[tool.Connection],
+    subject: ifcopenshell.entity_instance,
+    kind: str,
+    elem: ifcopenshell.entity_instance,
+    partner: ifcopenshell.entity_instance,
+    skip_elem_recreate: bool = False,
+    skip_partner_recreate: bool = False,
+) -> None:
+    """Run the post-disconnect cleanup for one connection.
+
+    ``elem`` and ``partner`` are the two endpoints. The ``skip_*_recreate``
+    flags suppress per-side regenerate / recreate work — used by the
+    cascade-on-delete to avoid re-extruding entities that are about to be
+    removed by ``remove_product``. For the disconnect operator (where neither
+    endpoint is being deleted), both flags stay False and the full cleanup
+    runs on both sides.
+    """
+    if kind == "path":
+        bonsai.core.geometry.remove_connection(geometry, connection=subject)
+        if not skip_elem_recreate:
+            elem_obj = ifc.get_object(elem)
+            if elem_obj is not None:
+                model.recreate_wall(elem, elem_obj)
+        if not skip_partner_recreate:
+            partner_obj = ifc.get_object(partner)
+            if partner_obj is not None:
+                model.recreate_wall(partner, partner_obj)
+    elif kind == "element-top":
+        wall, _slab = connection.orient_element_top(subject, elem, partner)
+        ifc.run(
+            "geometry.disconnect_element",
+            relating_element=subject.RelatingElement,
+            related_element=subject.RelatedElement,
+        )
+        # Skip the wall-side regenerate when the wall is itself being deleted —
+        # either it's the elem of this cascade pass, or it's the partner that
+        # was queued earlier in the same batch.
+        if (wall is elem and skip_elem_recreate) or (wall is partner and skip_partner_recreate):
+            return
+        wall_obj = ifc.get_object(wall)
+        if wall_obj is not None:
+            regenerate_wall_to_underside(ifc, geometry, model, [wall_obj])
+    elif kind == "element":
+        ifc.run(
+            "geometry.disconnect_element",
+            relating_element=subject.RelatingElement,
+            related_element=subject.RelatedElement,
+        )
+    elif kind == "mep-pair-fitting":
+        if skip_elem_recreate and subject is elem:
+            return
+        if skip_partner_recreate and subject is partner:
+            return
+        fitting_obj = ifc.get_object(subject)
+        if fitting_obj is not None:
+            geometry.delete_ifc_object(fitting_obj)
+    else:
+        raise ValueError(f"Unknown kind: {kind!r}")

src/bonsai/bonsai/core/drawing.py

@@ -302,9 +302,25 @@ def add_drawing(
         context=drawing.get_body_context(),
         ifc_representation_class=None,
     )
+
+    drawings_parent_group = None
+    for group in ifc.get().by_type("IfcGroup"):
+        if group.Name == "DRAWINGS" and group.ObjectType == "DRAWINGS":
+            drawings_parent_group = group
+            break
+
+    if not drawings_parent_group:
+        drawings_parent_group = ifc.run("group.add_group")
+        ifc.run(
+            "group.edit_group", group=drawings_parent_group, attributes={"Name": "DRAWINGS", "ObjectType": "DRAWINGS"}
+        )
+
     group = ifc.run("group.add_group")
     ifc.run("group.edit_group", group=group, attributes={"Name": drawing_name, "ObjectType": "DRAWING"})
     ifc.run("group.assign_group", group=group, products=[element])
+
+    ifc.run("group.assign_group", group=drawings_parent_group, products=[group])
+
     collector.assign(camera)
     pset = ifc.run("pset.add_pset", product=element, name="EPset_Drawing")
     if drawing.get_unit_system() == "METRIC":
@@ -335,7 +351,22 @@ def add_drawing(
         },
     )
     drawing.setup_shading_styles_path(shading_styles_path)
-    information = ifc.run("document.add_information")
+
+    drawings_parent_document = None
+    for document in ifc.get().by_type("IfcDocumentInformation"):
+        if document.Name == "DRAWINGS" and document.Scope == "DRAWINGS":
+            drawings_parent_document = document
+            break
+
+    if not drawings_parent_document:
+        drawings_parent_document = ifc.run("document.add_information")
+        if ifc.get_schema() == "IFC2X3":
+            attributes = {"DocumentId": "DRAWINGS", "Name": "DRAWINGS", "Scope": "DRAWINGS"}
+        else:
+            attributes = {"Identification": "DRAWINGS", "Name": "DRAWINGS", "Scope": "DRAWINGS"}
+        ifc.run("document.edit_information", information=drawings_parent_document, attributes=attributes)
+
+    information = ifc.run("document.add_information", parent=drawings_parent_document)
     uri = drawing.get_default_drawing_path(drawing_name)
     reference = ifc.run("document.add_reference", information=information)
     if ifc.get_schema() == "IFC2X3":
@@ -363,9 +394,23 @@ def duplicate_drawing(
     drawing_tool.set_name(new_drawing, drawing_name)
     group = drawing_tool.get_drawing_group(new_drawing)
     ifc.run("group.unassign_group", group=group, products=[new_drawing])
+
+    drawings_parent_group = None
+    for parent_group in ifc.get().by_type("IfcGroup"):
+        if parent_group.Name == "DRAWINGS" and parent_group.ObjectType == "DRAWINGS":
+            drawings_parent_group = parent_group
+            break
+
+    if not drawings_parent_group:
+        drawings_parent_group = ifc.run("group.add_group")
+        ifc.run(
+            "group.edit_group", group=drawings_parent_group, attributes={"Name": "DRAWINGS", "ObjectType": "DRAWINGS"}
+        )
+
     new_group = ifc.run("group.add_group")
     ifc.run("group.edit_group", group=new_group, attributes={"Name": drawing_name, "ObjectType": "DRAWING"})
     ifc.run("group.assign_group", group=new_group, products=[new_drawing])
+    ifc.run("group.assign_group", group=drawings_parent_group, products=[new_group])
     if should_duplicate_annotations:
         new_annotations: list[ifcopenshell.entity_instance] = []
         annotation_objs = [ifc.get_object(a) for a in drawing_tool.get_group_elements(group) if a != drawing]
@@ -381,7 +426,21 @@ def duplicate_drawing(
     old_reference = drawing_tool.get_drawing_document(new_drawing)
     ifc.run("document.unassign_document", products=[new_drawing], document=old_reference)
 
-    information = ifc.run("document.add_information")
+    drawings_parent_document = None
+    for document in ifc.get().by_type("IfcDocumentInformation"):
+        if document.Name == "DRAWINGS" and document.Scope == "DRAWINGS":
+            drawings_parent_document = document
+            break
+
+    if not drawings_parent_document:
+        drawings_parent_document = ifc.run("document.add_information")
+        if ifc.get_schema() == "IFC2X3":
+            attributes = {"DocumentId": "DRAWINGS", "Name": "DRAWINGS", "Scope": "DRAWINGS"}
+        else:
+            attributes = {"Identification": "DRAWINGS", "Name": "DRAWINGS", "Scope": "DRAWINGS"}
+        ifc.run("document.edit_information", information=drawings_parent_document, attributes=attributes)
+
+    information = ifc.run("document.add_information", parent=drawings_parent_document)
     uri = drawing_tool.get_default_drawing_path(drawing_name)
     reference = ifc.run("document.add_reference", information=information)
     if ifc.get_schema() == "IFC2X3":

src/bonsai/bonsai/core/model.py

@@ -167,12 +167,22 @@ def regenerate_wall_to_underside(
     model: type[tool.Model],
     wall_objs: list[bpy.types.Object],
 ) -> None:
-    """Re-clip walls to their connected underside objects after the slab has moved."""
+    """Re-clip walls to their connected underside objects after the slab has moved.
+
+    When a wall has no remaining slab connections — the case reached after the
+    last TOP rel is severed (via disconnect or via cascade-on-slab-delete) — the
+    stale trim booleans are cleaned up so the wall reverts to its pre-clip
+    extrusion instead of holding orphan ``IfcBooleanResult`` items and a dead
+    ``BBIM_Boolean`` pset.
+    """
     clipped_objs = []
+    reverted_objs = []
     for obj in wall_objs:
         wall = ifc.get_entity(obj)
         slab_objs = model.get_connected_slab_objs(wall)
         if not slab_objs:
+            model.remove_wall_to_underside_booleans(wall)
+            reverted_objs.append(obj)
             continue
         if ifc.is_moved(obj):
             geometry.run_edit_object_placement(obj=obj)
@@ -185,8 +195,9 @@ def regenerate_wall_to_underside(
             if clip:
                 model.clip_wall_to_slab(wall, clip)
         clipped_objs.append(obj)
-    if clipped_objs:
-        model.reload_body_representation(clipped_objs)
+    refresh_objs = clipped_objs + reverted_objs
+    if refresh_objs:
+        model.reload_body_representation(refresh_objs)
 
 
 def extend_wall_to_slab(

src/bonsai/bonsai/core/product.py

@@ -50,14 +50,15 @@ def copy_z_rotation_to_selected(
     flip: bool = False,
 ) -> int:
     """Apply ``active``'s Z-Euler rotation to each target."""
-    source_z = surveyor.get_z_rotation(active)
+    source_z = surveyor.get_z_rotation(active)  # ty: ignore[missing-argument]
     if flip:
         source_z += math.pi
     rotated = 0
     for obj in targets:
-        if abs(_z_rotation_diff(surveyor.get_z_rotation(obj), source_z)) < Z_ROTATION_ALIGNMENT_TOLERANCE:
+        target_z = surveyor.get_z_rotation(obj)  # ty: ignore[missing-argument]
+        if abs(_z_rotation_diff(target_z, source_z)) < Z_ROTATION_ALIGNMENT_TOLERANCE:
             continue
-        surveyor.set_z_rotation(obj, source_z)
+        surveyor.set_z_rotation(obj, source_z)  # ty: ignore[missing-argument]
         rotated += 1
         if ifc.get_entity(obj) is not None:
             bonsai.core.geometry.edit_object_placement(ifc, geometry, surveyor, obj=obj)

src/bonsai/bonsai/core/root.py

@@ -20,8 +20,6 @@ from __future__ import annotations
 
 from typing import TYPE_CHECKING, Optional
 
-import ifcopenshell.util.element
-
 if TYPE_CHECKING:
     import bpy
     import ifcopenshell
@@ -58,31 +56,12 @@ def copy_class(
             geometry.change_object_data(obj, data, is_global=True)
             geometry.rename_object(data, geometry.get_representation_name(ifc.get_entity(data)))
         # Only assign styles if element doesn't get them from material
-        if not _has_material_styles(ifc, new):
+        if not root.has_material_styles(new):
             root.assign_body_styles(new, obj)
     collector.assign(obj)
     return new
 
 
-def _has_material_styles(ifc: type[tool.Ifc], element: ifcopenshell.entity_instance) -> bool:
-    """Check if element has styles defined through its material.
-
-    Returns True if any constituent material has a style representation,
-    which means styles should NOT be applied directly to the geometry.
-    """
-    materials = ifcopenshell.util.element.get_materials(element)
-
-    if not materials:
-        return False
-
-    # Check if any of the constituent materials have styles
-    for material in materials:
-        if hasattr(material, "HasRepresentation") and material.HasRepresentation:
-            return True
-
-    return False
-
-
 def assign_class(
     ifc: type[tool.Ifc],
     collector: type[tool.Collector],

src/bonsai/bonsai/core/spatial.py

@@ -64,7 +64,7 @@ def assign_container(
         spatial.disable_editing(obj)
         all_elements.add(root_element)
         all_elements.update(spatial.get_decomposition(root_element))
-    if products := [e for e in root_elements if spatial.can_contain(container, root_element)]:
+    if products := [e for e in root_elements if spatial.can_contain(container, e)]:
         ifc.run("spatial.assign_container", products=products, relating_structure=container)
     for element in all_elements:
         if obj := ifc.get_object(element):

src/bonsai/bonsai/core/tool.py

@@ -195,6 +195,14 @@ class Collector:
     def assign(cls, obj, should_clean_users_collection=False): pass
 
 
+@interface
+class Connection:
+    def find_rel(cls, elem_a, elem_b): pass
+    def find_rels(cls, elem_a, elem_b): pass
+    def find_rels_for_element(cls, elem): pass
+    def orient_element_top(cls, rel, elem_a, elem_b): pass
+
+
 @interface
 class Context:
     def clear_context(cls): pass
@@ -459,7 +467,6 @@ class Geometry:
     def has_axis_representation(cls, element): pass
     def has_data_users(cls, data): pass
     def has_material_style_override(cls, obj): pass
-    def has_material_styles(cls, element): pass
     def import_representation_parameters(cls, data): pass
     def is_body_representation(cls, representation): pass
     def is_box_representation(cls, representation): pass
@@ -695,11 +702,13 @@ class Model:
     def load_openings(cls, openings): pass
     def purge_scene_openings(cls): pass
     def recalculate_walls(cls, objs): pass
+    def recreate_wall(cls, element, obj): pass
     def regenerate_array(cls, parent, data): pass
     def regenerate_profile(cls, obj): pass
     def regenerate_slab(cls, obj): pass
     def reload_body_representation(cls, obj_or_objects): pass
     def remove_wall_to_underside_booleans(cls, wall): pass
+    def strip_underside_booleans(cls, wall): pass
     def replace_object_ifc_representation(cls, ifc_file, ifc_context, obj, new_representation): pass
 
 
@@ -795,8 +804,8 @@ class Profile:
 
 @interface
 class Parametric:
-    def get_geom_generation(cls) -> int: pass
-    def refresh_post_commit(cls) -> None: pass
+    def get_geom_generation(cls): pass
+    def refresh_post_commit(cls, operator) -> None: pass
 
 
 @interface
@@ -888,6 +897,7 @@ class Root:
     def get_object_name(cls, obj): pass
     def get_object_representation(cls, obj): pass
     def get_representation_context(cls, representation): pass
+    def has_material_styles(cls, element): pass
     def is_containable(cls, element): pass
     def is_drawing_annotation(cls, element): pass
     def is_element_a(cls, element, ifc_class): pass
@@ -1198,6 +1208,7 @@ class Type:
     def get_representation_context(cls, representation): pass
     def get_type_occurrences(cls, element_type): pass
     def has_material_usage(cls, element): pass
+    def is_relating_type_compatible(cls, occurrence, relating_type): pass
     def record_material_usage_attributes(cls, element): pass
     def restore_material_usage_attributes(cls, element, usage_attributes): pass
     def run_geometry_add_representation(cls, obj=None, context=None, ifc_representation_class=None, profile_set_usage=None): pass

src/bonsai/bonsai/tool/__init__.py

@@ -30,7 +30,9 @@ from bonsai.tool.bsdd import Bsdd
 from bonsai.tool.cad import Cad
 from bonsai.tool.clash import Clash
 from bonsai.tool.classification import Classification
+from bonsai.tool.clip_box import ClipBox
 from bonsai.tool.collector import Collector
+from bonsai.tool.connection import Connection
 from bonsai.tool.context import Context
 from bonsai.tool.cost import Cost
 from bonsai.tool.covering import Covering
@@ -78,3 +80,6 @@ from bonsai.tool.type import Type
 from bonsai.tool.unit import Unit
 from bonsai.tool.wall import Wall
 from bonsai.tool.web import Web
+
+# Have to move after import of tool.drawing
+from bonsai.tool.autosave import Autosave  # isort: skip

src/bonsai/bonsai/tool/array.py

@@ -178,6 +178,25 @@ class Array(bonsai.core.tool.Array):
         element_root = cls.get_array_root_guid(element)
         return [o for o in occurrences if cls.get_array_root_guid(o) == element_root]
 
+    @classmethod
+    def select_only_parent(cls, parent_obj: bpy.types.Object, context: bpy.types.Context) -> None:
+        """Post-condition for the user-facing regenerate and finish-edit paths:
+        only ``parent_obj`` is selected + active. Grow and shrink otherwise
+        diverge on which objects stay selected, surfacing an inconsistency."""
+        tool.Blender.select_and_activate_single_object(context, parent_obj)
+
+    @classmethod
+    def is_array_child(cls, element: entity_instance) -> bool:
+        """True when ``element`` is a child of a parametric array — has a
+        BBIM_Array pset whose Parent GUID points to a different element.
+        Lighter than ``get_child_layer_index`` (no ``by_guid`` lookup, no
+        Data parse); suitable for per-element checks in draw handlers."""
+        pset = ifcopenshell.util.element.get_pset(element, "BBIM_Array")
+        if not pset:
+            return False
+        parent_guid = pset.get("Parent")
+        return bool(parent_guid) and parent_guid != element.GlobalId
+
     @classmethod
     def get_child_layer_index(cls, child_element: entity_instance) -> int | None:
         """Index of the layer that produced ``child_element``, or ``None``

src/bonsai/bonsai/tool/autosave.py

@@ -0,0 +1,188 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+from __future__ import annotations
+
+import atexit
+import logging
+import os
+from collections.abc import Callable
+from pathlib import Path
+from typing import Union
+
+import bpy
+
+import bonsai.tool as tool
+from bonsai.bim import export_ifc
+from bonsai.bim.module.model import preview_base
+
+AUTOSAVING_SUFFIX = "_autosaving.ifc"
+AUTOSAVED_SUFFIX = "_autosaved.ifc"
+
+_timer_callback: Union[Callable[[], None], None] = None
+# See cleanup_stale_autosave() for why this is a cached plain string rather
+# than looked up live.
+_active_ifc_path_cache: Union[str, None] = None
+
+
+class Autosave:
+    @classmethod
+    def get_paths(cls, ifc_path: Union[str, Path]) -> tuple[Path, Path, Path]:
+        path = Path(ifc_path)
+        stem = path.stem if path.suffix.lower() == ".ifc" else path.name
+        parent = path.parent
+        main_path = path if path.suffix.lower() == ".ifc" else parent / f"{stem}.ifc"
+        autosaving_path = parent / f"{stem}{AUTOSAVING_SUFFIX}"
+        autosaved_path = parent / f"{stem}{AUTOSAVED_SUFFIX}"
+        return main_path, autosaving_path, autosaved_path
+
+    @classmethod
+    def get_active_ifc_path(cls) -> Union[Path, None]:
+        props = tool.Blender.get_bim_props()
+        if not props.ifc_file:
+            return None
+        path = tool.Blender.ensure_blender_path_is_abs(Path(props.ifc_file))
+        if path.suffix.lower() != ".ifc":
+            return None
+        return path
+
+    @classmethod
+    def _update_active_ifc_path_cache(cls) -> None:
+        global _active_ifc_path_cache
+        ifc_path = cls.get_active_ifc_path()
+        _active_ifc_path_cache = ifc_path.as_posix() if ifc_path is not None else None
+
+    @classmethod
+    def is_enabled(cls) -> bool:
+        return bool(tool.Blender.get_addon_preferences().autosave_enabled)
+
+    @classmethod
+    def get_interval_seconds(cls) -> float:
+        minutes = tool.Blender.get_addon_preferences().autosave_interval_minutes
+        return max(1.0, float(minutes) * 60.0)
+
+    @classmethod
+    def is_eligible(cls) -> bool:
+        return cls.is_enabled() and tool.Ifc.get() is not None and cls.get_active_ifc_path() is not None
+
+    @classmethod
+    def cancel_timer(cls) -> None:
+        global _timer_callback
+        if _timer_callback is not None and bpy.app.timers.is_registered(_timer_callback):
+            bpy.app.timers.unregister(_timer_callback)
+        _timer_callback = None
+
+    @classmethod
+    def reset_timer(cls) -> None:
+        cls.cancel_timer()
+        cls._update_active_ifc_path_cache()
+        if not cls.is_eligible():
+            return
+
+        def on_timer() -> None:
+            cls._on_timer_expired()
+            return None
+
+        global _timer_callback
+        _timer_callback = on_timer
+        bpy.app.timers.register(on_timer, first_interval=cls.get_interval_seconds())
+
+    @classmethod
+    def _on_timer_expired(cls) -> None:
+        if not cls.is_eligible():
+            return
+
+        prefs = tool.Blender.get_addon_preferences()
+        bim_props = tool.Blender.get_bim_props()
+
+        if bim_props.is_dirty:
+            if prefs.autosave_mode == "PROMPT":
+                bpy.ops.bim.autosave_prompt("INVOKE_DEFAULT")
+            elif prefs.autosave_mode == "BACKUP":
+                try:
+                    cls.perform_backup(bpy.context)
+                except Exception as error:
+                    print(f"Bonsai: autosave backup failed: {error}")
+        cls.reset_timer()
+
+    @classmethod
+    def perform_backup(cls, context: bpy.types.Context) -> None:
+        ifc_path = cls.get_active_ifc_path()
+        if ifc_path is None:
+            return
+
+        _, autosaving_path, autosaved_path = cls.get_paths(ifc_path)
+        autosaving_path.parent.mkdir(parents=True, exist_ok=True)
+
+        tool.Parametric.commit_pending_edits()
+        preview_base.discard_pending_previews(context.scene)
+
+        logger = logging.getLogger("ExportIFC")
+        output_file = autosaving_path.as_posix().replace("\\", "/")
+        settings = export_ifc.IfcExportSettings.factory(context, output_file, logger)
+        export_ifc.IfcExporter(settings).export()
+
+        try:
+            os.replace(autosaving_path, autosaved_path)
+        except OSError:
+            if autosaving_path.is_file():
+                autosaving_path.unlink(missing_ok=True)
+            raise
+
+    @classmethod
+    def get_newer_autosaved_path(cls, ifc_path: Union[str, Path]) -> Union[str, None]:
+        path = Path(ifc_path)
+        if path.suffix.lower() != ".ifc" or not path.is_file():
+            return None
+
+        _, _, autosaved_path = cls.get_paths(path)
+        if not autosaved_path.is_file():
+            return None
+        if autosaved_path.stat().st_mtime > path.stat().st_mtime:
+            return autosaved_path.as_posix().replace("\\", "/")
+        return None
+
+    @classmethod
+    def cleanup_stale_autosave(cls) -> None:
+        """Remove the active IFC's autosave file(s) on a graceful shutdown.
+
+        Registered via `atexit`, which only runs on a normal interpreter
+        shutdown - never on an actual crash. So a deliberate quit (whether
+        the user saved or chose "don't save") clears the recovery file and
+        won't prompt on next startup, while a genuine crash leaves it in
+        place for recovery, since no atexit callbacks fire then.
+
+        Deliberately reads only `_active_ifc_path_cache` - a plain string
+        kept up to date by `reset_timer()` - rather than touching `bpy` here.
+        By the time `atexit` fires, Blender's own C++ side is torn down far
+        enough that even reading `bpy.context.scene` aborts the process
+        (std::bad_optional_access) instead of raising a catchable exception.
+        """
+        if _active_ifc_path_cache is None:
+            return
+        try:
+            _, autosaving_path, autosaved_path = cls.get_paths(_active_ifc_path_cache)
+            autosaving_path.unlink(missing_ok=True)
+            autosaved_path.unlink(missing_ok=True)
+        except Exception:
+            pass
+
+
+atexit.register(Autosave.cleanup_stale_autosave)

src/bonsai/bonsai/tool/blender.py

@@ -22,6 +22,7 @@ from __future__ import annotations
 
 import contextlib
 import importlib
+import math
 import os
 import platform
 import subprocess
@@ -29,7 +30,15 @@ import sys
 import tempfile
 import traceback
 import types
-from collections.abc import Callable, Generator, Iterable, Mapping, Sequence, Sized
+from collections.abc import (
+    Callable,
+    Generator,
+    Iterable,
+    Iterator,
+    Mapping,
+    Sequence,
+    Sized,
+)
 from datetime import datetime
 from functools import cache, lru_cache
 from pathlib import Path
@@ -46,9 +55,11 @@ from typing import (
 
 import bmesh
 import bpy
+import gpu
 import ifcopenshell.util.element
 import numpy as np
 import numpy.typing as npt
+from gpu_extras.batch import batch_for_shader
 from ifcopenshell import entity_instance
 from mathutils import Matrix, Vector
 
@@ -229,15 +240,22 @@ class Blender(bonsai.core.tool.Blender):
 
     @classmethod
     def get_active_object(cls, is_selected: bool = False) -> Union[bpy.types.Object, None]:
-        """Gets the active object
+        """Return the active object, or ``None`` when the current context
+        exposes neither ``active_object`` nor a ``view_layer`` (stripped
+        operator contexts).
 
         :param is_selected: If true, the active object also needs to be selected.
         """
-        if obj := (getattr(bpy.context, "active_object", None) or bpy.context.view_layer.objects.active):
-            if not is_selected:
-                return obj
-            if obj.select_get():
-                return obj
+        obj = getattr(bpy.context, "active_object", None)
+        if obj is None:
+            view_layer = getattr(bpy.context, "view_layer", None)
+            if view_layer is not None:
+                obj = view_layer.objects.active
+        if obj is None:
+            return None
+        if is_selected and not obj.select_get():
+            return None
+        return obj
 
     @classmethod
     def get_selected_objects(cls, include_active: bool = True) -> set[bpy.types.Object]:
@@ -520,6 +538,19 @@ class Blender(bonsai.core.tool.Blender):
             cls.handlers.clear()
             cls.is_installed = False
 
+        def draw_batch(self, shader_type, content_pos, color, indices=None):
+            """Submit a GPU batch through ``self.line_shader`` (for ``"LINES"``)
+            or ``self.shader`` (for any other primitive). Skips empty batches
+            via ``validate_shader_batch_data`` so Blender 4.4+ doesn't crash on
+            empty ``indices``. Subclasses bind both shaders in their draw method
+            before calling this helper."""
+            if not Blender.validate_shader_batch_data(content_pos, indices):
+                return
+            shader = self.line_shader if shader_type == "LINES" else self.shader
+            batch = batch_for_shader(shader, shader_type, {"pos": content_pos}, indices=indices)
+            shader.uniform_float("color", color)
+            batch.draw(shader)
+
         @staticmethod
         def _lookup_active_instance(gizmo_cls: type, context: bpy.types.Context) -> Optional[Any]:
             """Return the live ``GizmoGroup`` instance registered under
@@ -567,6 +598,120 @@ class Blender(bonsai.core.tool.Blender):
                 else:
                     decorator_cls.uninstall()
 
+    # Bonsai overrides Blender's default move/duplicate keymaps with macros
+    # that wrap TRANSFORM_OT_translate. While a macro is the outer modal
+    # entry, the inner TRANSFORM_OT_translate does not surface in
+    # window.modal_operators — the macro's own idname does. The ``BIM_OT_``
+    # prefix is what Blender returns from ``bl_idname`` at runtime (the
+    # class declaration uses the dotted ``bim.`` form).
+    BONSAI_TRANSFORM_MACROS: frozenset[str] = frozenset(
+        {
+            "BIM_OT_override_move_macro",  # G key
+            "BIM_OT_override_object_duplicate_move_macro",  # Shift+D
+            "BIM_OT_override_object_duplicate_move_linked_macro",  # Alt+D
+            "BIM_OT_object_duplicate_move_linked_aggregate_macro",  # Ctrl+Shift+D
+        }
+    )
+
+    @classmethod
+    def is_transform_modal_active(cls, context: bpy.types.Context) -> bool:
+        """True iff a Blender transform modal (G/R/S and siblings, including
+        Bonsai's macro overrides) is currently driving per-frame
+        ``matrix_world`` updates. Reads ``window.modal_operators`` — the
+        Blender 4.2+ collection of running modal operators. Callers gate
+        per-frame side effects (gizmo positioning, IFC persistence, etc.)
+        on this so they don't fire during the drag.
+
+        Falls back to scanning every window in the window manager when
+        ``context.window`` is ``None`` — depsgraph callbacks run with a
+        limited context where ``context.window`` is typically missing,
+        but the modal is still active on one of the WM's windows.
+        """
+        window = getattr(context, "window", None)
+        if window is not None and getattr(window, "modal_operators", None):
+            windows = [window]
+        else:
+            wm = getattr(context, "window_manager", None) or bpy.context.window_manager
+            if wm is None:
+                return False
+            windows = list(wm.windows)
+        for w in windows:
+            modal_ops = getattr(w, "modal_operators", None)
+            if not modal_ops:
+                continue
+            for op in modal_ops:
+                idname = op.bl_idname
+                if idname.startswith("TRANSFORM_OT_") or idname in cls.BONSAI_TRANSFORM_MACROS:
+                    return True
+        return False
+
+    @classmethod
+    def is_in_edit_mode(cls, context: Optional[bpy.types.Context] = None) -> bool:
+        """True iff the active object is in any edit-style mode.
+
+        Catches every ``EDIT_*`` variant (mesh, curve, armature,
+        metaball, lattice, surface, text, grease pencil). Defaults to
+        ``OBJECT`` when the mode attribute is missing so background-mode
+        callers (no UI context) don't false-positive.
+        """
+        ctx = context if context is not None else bpy.context
+        mode = getattr(ctx, "mode", "OBJECT")
+        return mode.startswith("EDIT_")
+
+    @classmethod
+    def iter_view3d_regions(cls) -> Iterator[tuple[bpy.types.Area, bpy.types.Region, bpy.types.RegionView3D]]:
+        """Yield ``(area, region, region_3d)`` for every WINDOW region in every 3D viewport.
+
+        Useful for features that need to act on every visible 3D viewport
+        (clip planes, draw handlers, region redraw fanout). Empty
+        generator when ``bpy.context.screen`` is unavailable (shutdown,
+        background mode without a screen).
+        """
+        screen = getattr(getattr(bpy, "context", None), "screen", None)
+        if screen is None:
+            return
+        for area in screen.areas:
+            if area.type != "VIEW_3D":
+                continue
+            for region in area.regions:
+                if region.type != "WINDOW":
+                    continue
+                region_3d = getattr(region, "data", None)
+                if region_3d is None:
+                    continue
+                yield area, region, region_3d
+
+    @classmethod
+    def get_or_create_collection(cls, scene: bpy.types.Scene, name: str) -> bpy.types.Collection:
+        """Return the named collection, creating + linking it to ``scene`` if absent."""
+        collection = bpy.data.collections.get(name)
+        if collection is None:
+            collection = bpy.data.collections.new(name)
+            scene.collection.children.link(collection)
+        return collection
+
+    @classmethod
+    def serialize_matrix(cls, matrix: Matrix) -> str:
+        """Serialize a 4x4 matrix as a 16-float comma-separated string.
+
+        Round-trip pair with :meth:`deserialize_matrix`. Used for storing
+        a matrix in an IFC pset string property without losing precision
+        (``%.9g`` carries ~9 significant digits, enough for ``float32``
+        round-trip).
+        """
+        return ",".join(f"{matrix[r][c]:.9g}" for r in range(4) for c in range(4))
+
+    @classmethod
+    def deserialize_matrix(cls, text: str) -> Matrix:
+        """Inverse of :meth:`serialize_matrix`."""
+        floats = [float(v) for v in text.split(",")]
+        return Matrix([tuple(floats[r * 4 : r * 4 + 4]) for r in range(4)])
+
+    @classmethod
+    def hash_matrix(cls, matrix: Matrix) -> int:
+        """Hash a 4x4 matrix by its 16 floats. Useful as a cache key."""
+        return hash(tuple(matrix[r][c] for r in range(4) for c in range(4)))
+
     @classmethod
     def is_view_top_down(cls, context: bpy.types.Context, threshold: float = 0.9659) -> bool:
         """True when the viewport camera is looking ~straight down (or up) the world Z axis.
@@ -880,19 +1025,57 @@ class Blender(bonsai.core.tool.Blender):
         #     ( 1.0,  1.0, -1.0),        # 7
         # ]
         bound_box = obj.bound_box
+        min_pt = Vector(bound_box[0])
+        max_pt = Vector(bound_box[6])
         bbox_dict = {
-            "min_x": bound_box[0][0],
-            "max_x": bound_box[6][0],
-            "min_y": bound_box[0][1],
-            "max_y": bound_box[6][1],
-            "min_z": bound_box[0][2],
-            "max_z": bound_box[6][2],
-            "min_point": Vector(bound_box[0]),
-            "max_point": Vector(bound_box[6]),
-            "center": (Vector(bound_box[6]) + Vector(bound_box[0])) / 2,
+            "min_x": min_pt.x,
+            "max_x": max_pt.x,
+            "min_y": min_pt.y,
+            "max_y": max_pt.y,
+            "min_z": min_pt.z,
+            "max_z": max_pt.z,
+            "min_point": min_pt,
+            "max_point": max_pt,
+            "center": (max_pt + min_pt) / 2,
+            # Intrinsic per-axis size in object-local space. Distinct from
+            # ``obj.dimensions``, which folds object-level scale into its
+            # output; this is the raw mesh bbox extent.
+            "dimensions": (max_pt.x - min_pt.x, max_pt.y - min_pt.y, max_pt.z - min_pt.z),
         }
         return bbox_dict
 
+    @classmethod
+    def get_object_world_bounding_box(cls, obj: bpy.types.Object) -> dict[str, Union[float, Vector]]:
+        """Same shape as ``get_object_bounding_box`` but with ``matrix_world``
+        applied — extents are computed across the 8 transformed corners, so
+        a rotated or scaled object reports its actual world-axis AABB rather
+        than the misleading transform of the local-space corners.
+
+        ``bound_box[0]`` / ``bound_box[6]`` are the local min/max corners but
+        do NOT correspond to the world AABB extremes once the object is
+        rotated, so min/max must be taken per-axis across all 8 corners."""
+        corners = [obj.matrix_world @ Vector(c) for c in obj.bound_box]
+        xs = [c.x for c in corners]
+        ys = [c.y for c in corners]
+        zs = [c.z for c in corners]
+        min_point = Vector((min(xs), min(ys), min(zs)))
+        max_point = Vector((max(xs), max(ys), max(zs)))
+        return {
+            "min_x": min_point.x,
+            "max_x": max_point.x,
+            "min_y": min_point.y,
+            "max_y": max_point.y,
+            "min_z": min_point.z,
+            "max_z": max_point.z,
+            "min_point": min_point,
+            "max_point": max_point,
+            "center": (min_point + max_point) / 2,
+            # World-axis-aligned per-axis size. For rotated objects this is
+            # the AABB extent, not the intrinsic mesh size (use the local
+            # variant for that).
+            "dimensions": (max_point.x - min_point.x, max_point.y - min_point.y, max_point.z - min_point.z),
+        }
+
     @classmethod
     def select_and_activate_single_object(cls, context: bpy.types.Context, active_object: bpy.types.Object) -> None:
         for obj in context.selected_objects:
@@ -1228,7 +1411,10 @@ class Blender(bonsai.core.tool.Blender):
 
     @classmethod
     def get_object_from_guid(cls, guid: str) -> Union[bpy.types.Object, None]:
-        element = tool.Ifc.get().by_guid(guid)
+        try:
+            element = tool.Ifc.get().by_guid(guid)
+        except RuntimeError:
+            return None
         obj = tool.Ifc.get_object(element)
         if obj:
             return obj
@@ -1332,74 +1518,6 @@ class Blender(bonsai.core.tool.Blender):
         return True
 
     class Modifier:
-        # ----------------------------------------------------------------------
-        # FIXME(PR5): backward-compat shims for callers still using the
-        # pre-refactor API. The is_<type> predicates now live on tool.Parametric;
-        # the Array helper bag now lives on tool.Array. PR4 migrates each caller;
-        # this whole shim block is removed in PR5's cleanup.
-        # ----------------------------------------------------------------------
-
-        @classmethod
-        def is_door(cls, element: entity_instance) -> bool:
-            return tool.Parametric.is_door(element)
-
-        @classmethod
-        def is_railing(cls, element: entity_instance) -> bool:
-            return tool.Parametric.is_railing(element)
-
-        @classmethod
-        def is_roof(cls, element: entity_instance) -> bool:
-            return tool.Parametric.is_roof(element)
-
-        @classmethod
-        def is_stair(cls, element: entity_instance) -> bool:
-            return tool.Parametric.is_stair(element)
-
-        @classmethod
-        def is_wall(cls, element: entity_instance) -> bool:
-            return tool.Parametric.is_wall(element)
-
-        @classmethod
-        def is_window(cls, element: entity_instance) -> bool:
-            return tool.Parametric.is_window(element)
-
-        class Array:
-            @classmethod
-            def bake_children_transform(cls, parent_element: ifcopenshell.entity_instance, item: int) -> None:
-                tool.Array.bake_children_transform(parent_element, item)
-
-            @classmethod
-            def constrain_children_to_parent(cls, parent_element: ifcopenshell.entity_instance) -> None:
-                tool.Array.constrain_children_to_parent(parent_element)
-
-            @classmethod
-            def get_all_children_objects(cls, parent_element: ifcopenshell.entity_instance) -> list:
-                return tool.Array.get_all_children_objects(parent_element)
-
-            @classmethod
-            def get_all_objects(cls, parent_element: ifcopenshell.entity_instance) -> list:
-                return tool.Array.get_all_objects(parent_element)
-
-            @classmethod
-            def get_children_objects(cls, modifier_data: dict) -> list:
-                return tool.Array.get_children_objects(modifier_data)
-
-            @classmethod
-            def get_modifiers_data(cls, parent_element: ifcopenshell.entity_instance):
-                return tool.Array.get_modifiers_data(parent_element)
-
-            @classmethod
-            def remove_constraints(cls, parent_element: ifcopenshell.entity_instance) -> None:
-                tool.Array.remove_constraints(parent_element)
-
-            @classmethod
-            def set_children_lock_state(
-                cls, parent_element: ifcopenshell.entity_instance, item: int, lock: bool
-            ) -> None:
-                tool.Array.set_children_lock_state(parent_element, item, lock)
-
-        # ----------------------------------------------------------------------
-
         @classmethod
         def try_applying_edit_mode(cls, obj: bpy.types.Object, element: entity_instance) -> bool:
             """Tries to validate the current BIM modifier parameters for the active object
@@ -1419,6 +1537,10 @@ class Blender(bonsai.core.tool.Blender):
                 bpy.ops.bim.enable_editing_railing_path()
             elif feature := tool.Parametric.is_object_editing(obj):
                 tool.Parametric.run_bim_op(feature.finish_op)
+            elif tool.Parametric.is_wall(element):
+                # Placed after the generic finish dispatch so the TAB toggle splits:
+                # wall already editing → finish above; wall not editing → enter here.
+                bpy.ops.bim.enable_editing_wall()
             else:
                 return False
             return True
@@ -1481,6 +1603,38 @@ class Blender(bonsai.core.tool.Blender):
             parent_guid = pset.get("Parent")
             return parent_guid is not None and parent_guid != element.GlobalId
 
+        @classmethod
+        def any_selected_is_array_child(cls) -> bool:
+            """True if any selected IFC-linked object is a Bonsai array child.
+
+            Multi-object wall topology gizmos (merge / join / extend / unjoin
+            / fillet) and their bound operators gate on this: any mutation
+            applied to a child is overwritten on the next
+            ``regenerate_array``, and merge specifically would leave the
+            parent's ``BBIM_Array.Data`` list pointing at a deleted GUID.
+
+            Memoised against (selection signature, IFC geometry generation)
+            so gizmo polls that fire per input event don't re-walk the pset
+            for every selected object every frame. Identity-keyed so plain
+            Python objects (used by tests) work alongside real Blender
+            ``bpy_struct`` wrappers."""
+            selected = tool.Blender.get_selected_objects()
+            selection_sig = frozenset(id(obj) for obj in selected)
+            current_gen = tool.Parametric.get_geom_generation()
+            cached = cls._any_selected_array_child_memo
+            if cached is not None and cached[0] == selection_sig and cached[1] == current_gen:
+                return cached[2]
+            result = False
+            for obj in selected:
+                element = tool.Ifc.get_entity(obj)
+                if element is not None and cls.is_array_child(element):
+                    result = True
+                    break
+            cls._any_selected_array_child_memo = (selection_sig, current_gen, result)
+            return result
+
+        _any_selected_array_child_memo: tuple[frozenset[int], int, bool] | None = None
+
         @classmethod
         def is_slab(cls, element: entity_instance) -> bool:
             """A slab is host-eligible for the parametric add-opening gizmo if
@@ -2018,6 +2172,18 @@ class Blender(bonsai.core.tool.Blender):
         dct = {cls.bl_idname: cls.ifc_element_type for cls in (BimTool.__subclasses__())}
         return types.MappingProxyType(dct)
 
+    @classmethod
+    @lru_cache
+    def get_property_header_tools(cls) -> frozenset[str]:
+        """``BimTool`` plus its parametric subclasses — the workspace
+        tools whose 3D-view / N-panel header surfaces BIM Tool property
+        floats (extrusion_depth, length, x_angle). ``AnnotationTool``
+        and the non-``BimTool`` workspace tools (spatial / structural /
+        cad / covering) are excluded by construction."""
+        from bonsai.bim.module.model.workspace import BimTool
+
+        return frozenset(cls.bl_idname for cls in (BimTool.__subclasses__() + [BimTool]))
+
     @classmethod
     def get_object_constraint_props(cls, obj: bpy.types.Object) -> BIMObjectConstraintProperties:
         return obj.BIMObjectConstraintProperties  # pyright: ignore[reportAttributeAccessIssue]
@@ -2238,6 +2404,149 @@ class Blender(bonsai.core.tool.Blender):
             return False
         return True
 
+    @staticmethod
+    def transparent_color(color: Iterable[float], alpha: float = 0.1) -> list[float]:
+        """Copy an RGBA color with its alpha channel overridden."""
+        out = [c for c in color]
+        out[3] = alpha
+        return out
+
+    @classmethod
+    def draw_bmesh_face_tris(
+        cls,
+        bm: bmesh.types.BMesh,
+        world_vert_coords: list,
+        color: Any,
+        draw_batch: Callable[[str, list, Any, list], None],
+    ) -> None:
+        """Submit a non-mutating beauty-triangulated TRIS batch for ``bm``'s faces.
+
+        ``world_vert_coords`` must be indexed by ``bm.verts`` index. Never call
+        ``bmesh.ops.triangulate`` on a live bmesh to compute draw indices — it
+        mutates the input and produces ear-clip fans that render as visible
+        streaks at low alpha.
+        """
+        tris = [[loop.vert.index for loop in tri] for tri in bm.calc_loop_triangles()]
+        draw_batch("TRIS", world_vert_coords, color, tris)
+
+    @classmethod
+    def draw_quads(
+        cls,
+        context: bpy.types.Context,
+        quads: Sequence[
+            tuple[
+                tuple[float, float, float],
+                tuple[float, float, float],
+                tuple[float, float, float],
+                tuple[float, float, float],
+            ]
+        ],
+        *,
+        fill_color: Optional[tuple[float, float, float, float]] = None,
+        outline_color: Optional[tuple[float, float, float, float]] = None,
+        outline_width: float = 1.0,
+    ) -> None:
+        """Render ``quads`` (each a 4-tuple of CCW world-space corners) as
+        a filled TRIS batch, an outline LINES batch, or both.
+
+        Both colors are RGBA 4-tuples. Pass ``fill_color=None`` to skip
+        the fill pass and ``outline_color=None`` to skip the outline.
+        Skipping both is a no-op.
+
+        Replaces the per-decorator quad-fill helpers that used to live
+        inline in each feature module.
+        """
+        if not quads or (fill_color is None and outline_color is None):
+            return
+        region = getattr(context, "region", None)
+        if region is None:
+            return
+
+        verts: list[tuple[float, float, float]] = []
+        tri_indices: list[tuple[int, int, int]] = []
+        line_indices: list[tuple[int, int]] = []
+        for quad in quads:
+            if len(quad) != 4:
+                continue
+            base = len(verts)
+            verts.extend(tuple(v) for v in quad)
+            if fill_color is not None:
+                tri_indices.append((base, base + 1, base + 2))
+                tri_indices.append((base, base + 2, base + 3))
+            if outline_color is not None:
+                line_indices.append((base, base + 1))
+                line_indices.append((base + 1, base + 2))
+                line_indices.append((base + 2, base + 3))
+                line_indices.append((base + 3, base))
+
+        if not cls.validate_shader_batch_data(verts, None):
+            return
+
+        gpu.state.blend_set("ALPHA")
+        try:
+            if fill_color is not None and tri_indices:
+                shader = gpu.shader.from_builtin("UNIFORM_COLOR")
+                shader.bind()
+                shader.uniform_float("color", fill_color)
+                batch = batch_for_shader(shader, "TRIS", {"pos": verts}, indices=tri_indices)
+                batch.draw(shader)
+            if outline_color is not None and line_indices:
+                shader = gpu.shader.from_builtin("UNIFORM_COLOR")
+                shader.bind()
+                shader.uniform_float("color", outline_color)
+                # Outline width: the UNIFORM_COLOR shader respects the
+                # GPU's current line-width state; restore on exit.
+                prev_width = gpu.state.line_width_get()
+                gpu.state.line_width_set(outline_width)
+                try:
+                    batch = batch_for_shader(shader, "LINES", {"pos": verts}, indices=line_indices)
+                    batch.draw(shader)
+                finally:
+                    gpu.state.line_width_set(prev_width)
+        finally:
+            gpu.state.blend_set("NONE")
+
+    @classmethod
+    def build_dashed_line_segments(
+        cls,
+        world_verts: Sequence[Sequence[float]],
+        edges_indices: Sequence[Sequence[int]],
+        dash_period: float,
+        dash_width: float,
+    ) -> tuple[list[tuple[float, float, float]], list[tuple[int, int]]]:
+        """Pre-segment edges into world-space dash chunks for a vanilla LINES batch.
+
+        Each input edge is sliced into segments of length ``dash_width`` spaced
+        ``dash_period`` apart (dash phase resets per-edge). The result is a fresh
+        ``(verts, edges)`` pair that draws as dashes through any standard line
+        shader — letting both passes of a visible/occluded outline reuse the
+        same shader so depth values match exactly across passes.
+        """
+        new_verts: list[tuple[float, float, float]] = []
+        new_edges: list[tuple[int, int]] = []
+        if dash_period <= 0 or dash_width <= 0:
+            return new_verts, new_edges
+        n = len(world_verts)
+        for i, j in edges_indices:
+            if not (0 <= i < n and 0 <= j < n) or i == j:
+                continue
+            v0 = world_verts[i]
+            v1 = world_verts[j]
+            dx, dy, dz = v1[0] - v0[0], v1[1] - v0[1], v1[2] - v0[2]
+            edge_length = math.sqrt(dx * dx + dy * dy + dz * dz)
+            if edge_length == 0.0:
+                continue
+            ux, uy, uz = dx / edge_length, dy / edge_length, dz / edge_length
+            t = 0.0
+            while t < edge_length:
+                t_end = min(t + dash_width, edge_length)
+                idx = len(new_verts)
+                new_verts.append((v0[0] + ux * t, v0[1] + uy * t, v0[2] + uz * t))
+                new_verts.append((v0[0] + ux * t_end, v0[1] + uy * t_end, v0[2] + uz * t_end))
+                new_edges.append((idx, idx + 1))
+                t += dash_period
+        return new_verts, new_edges
+
     @classmethod
     def extract_error_reports(cls, exception: RuntimeError) -> list[str]:
         """Extracts error report lines from a runtime exception during operator execution.
@@ -2388,7 +2697,7 @@ class Blender(bonsai.core.tool.Blender):
 
         See https://projects.blender.org/blender/blender/issues/149283
         """
-        if len(bytedata) == (n * 2):
+        if len(bytedata) == (n * 8):  # float64 has 8 bytes per element
             return np.frombuffer(bytedata, dtype=np.float64).astype(np.float32)
         return np.frombuffer(bytedata, dtype=np.float32)
 

src/bonsai/bonsai/tool/cad.py

@@ -177,6 +177,14 @@ class Cad:
             return False
         return (x + tolerance) > value > (x - tolerance)
 
+    @classmethod
+    def is_multiple_of_pi(cls, value: float) -> bool:
+        """True when ``value`` is an integer multiple of π within tolerance —
+        the parallelism / anti-parallelism check rotation-difference logic
+        reaches for (segments aligned modulo a 180° flip)."""
+        n = round(value / math.pi)
+        return cls.is_x(abs(value - n * math.pi), 0)
+
     @classmethod
     def normalise_angle(cls, angle: float) -> float:
         """Normalise an angle between -179 and 180"""
@@ -198,6 +206,237 @@ class Cad:
         """
         return geometry.intersect_line_plane(v1, v2, plane_co, plane_no)
 
+    @classmethod
+    def obb_world_clip_planes(
+        cls,
+        center: Vector,
+        axes: tuple[Vector, Vector, Vector],
+        half_extents: Vector,
+    ) -> tuple[tuple[float, float, float, float], ...]:
+        """Return the 6 inward world clip planes of an oriented bounding box.
+
+        Each plane is a 4-tuple ``(a, b, c, d)`` for the equation
+        ``a*x + b*y + c*z + d``; a point is KEPT when the value is ``>= 0``
+        for every plane, matching ``RegionView3D.clip_planes`` semantics.
+        Return order is ``(+x, -x, +y, -y, +z, -z)`` where ``+x`` is the face
+        on the positive side of ``axes[0]``. ``axes`` are assumed orthonormal.
+        """
+        cx, cy, cz = center.x, center.y, center.z
+        planes: list[tuple[float, float, float, float]] = []
+        for i in range(3):
+            ux, uy, uz = axes[i].x, axes[i].y, axes[i].z
+            h = float(half_extents[i])
+            px, py, pz = cx + h * ux, cy + h * uy, cz + h * uz
+            nx, ny, nz = -ux, -uy, -uz
+            planes.append((nx, ny, nz, -(nx * px + ny * py + nz * pz)))
+            px, py, pz = cx - h * ux, cy - h * uy, cz - h * uz
+            planes.append((ux, uy, uz, -(ux * px + uy * py + uz * pz)))
+        return tuple(planes)
+
+    @classmethod
+    def obb_clip_planes_from_matrix(
+        cls,
+        matrix_world: Matrix,
+        expand: float = 0.0,
+        expand_rel: float = 0.0,
+    ) -> tuple[tuple[float, float, float, float], ...]:
+        """Return the 6 inward world clip planes for the unit cube under ``matrix_world``.
+
+        The implicit box is ``[-1, +1]^3`` in object-local space, so the
+        host's ``matrix_world`` translation is the world centre, its
+        rotation orients the box axes, and each column's magnitude is the
+        world half-extent along that local axis. ``expand`` (absolute
+        world units) and ``expand_rel`` (fraction of each axis's
+        half-extent) both add an outward margin — callers that visualise
+        the box with overlapping geometry (e.g. an empty CUBE display
+        sharing edges with the clip planes) pass non-zero values so the
+        box's own wireframe sits safely INSIDE the clip volume. Use the
+        relative form when the box is rendered at varying scales, since
+        the depth-buffer precision needed to keep an edge unclipped grows
+        with world-coordinate magnitude.
+        """
+        world_center = matrix_world.col[3].xyz
+        linear = matrix_world.to_3x3()
+        world_axes = []
+        world_half_list = []
+        for i in range(3):
+            v = linear.col[i].copy()
+            length = v.length
+            if length > 0.0:
+                world_axes.append(v / length)
+            else:
+                world_axes.append(Vector((0.0, 0.0, 0.0)))
+            world_half_list.append(length + expand + length * expand_rel)
+        return cls.obb_world_clip_planes(
+            world_center,
+            (world_axes[0], world_axes[1], world_axes[2]),
+            Vector(world_half_list),
+        )
+
+    @classmethod
+    def point_is_inside_clip_planes(
+        cls,
+        planes: tuple[tuple[float, float, float, float], ...],
+        point: Vector,
+        eps: float = 1e-6,
+    ) -> bool:
+        """True iff ``point`` is on the kept side of every plane (inclusive)."""
+        x, y, z = point.x, point.y, point.z
+        for a, b, c, d in planes:
+            if a * x + b * y + c * z + d < -eps:
+                return False
+        return True
+
+    @classmethod
+    def newell_normal(cls, points: Sequence) -> Vector:
+        """Newell's-method normal for a (possibly non-planar) 3D polygon ring.
+
+        Robust for thin / near-degenerate rings where a two-edge cross
+        product would be unstable.
+        """
+        nx = ny = nz = 0.0
+        n = len(points)
+        for i in range(n):
+            cur = points[i]
+            nxt = points[(i + 1) % n]
+            nx += (cur[1] - nxt[1]) * (cur[2] + nxt[2])
+            ny += (cur[2] - nxt[2]) * (cur[0] + nxt[0])
+            nz += (cur[0] - nxt[0]) * (cur[1] + nxt[1])
+        return Vector((nx, ny, nz))
+
+    @classmethod
+    def plane_basis(cls, points: Sequence) -> tuple[Vector, Vector]:
+        """Return an orthonormal ``(u, v)`` basis for the ring's best-fit plane."""
+        normal = cls.newell_normal(points)
+        if normal.length < 1e-12:
+            normal = Vector((0.0, 0.0, 1.0))
+        normal = normal.normalized()
+        ref = Vector((1.0, 0.0, 0.0))
+        if abs(normal.x) > 0.9:
+            ref = Vector((0.0, 1.0, 0.0))
+        u = normal.cross(ref)
+        if u.length < 1e-12:
+            ref = Vector((0.0, 0.0, 1.0))
+            u = normal.cross(ref)
+        u = u.normalized()
+        v = normal.cross(u).normalized()
+        return u, v
+
+    @classmethod
+    def tessellate_ring_planar(cls, polyline_list: list[list]) -> list[tuple[int, int, int]]:
+        """Triangulate ``[outer, *inners]`` 3D coord rings in their own plane.
+
+        Projects every ring onto the outer ring's best-fit plane and
+        returns ``(i, j, k)`` index triples into the flat
+        ``outer + inners[0] + inners[1] + ...`` vertex list. Falls
+        back to a shapely constrained Delaunay triangulation when
+        ``mathutils.geometry.tessellate_polygon`` silently leaves ring
+        vertices unused (its known failure mode on complex concave
+        polygons-with-holes).
+        """
+        from mathutils.geometry import tessellate_polygon
+
+        if not polyline_list or not polyline_list[0]:
+            return []
+        outer = polyline_list[0]
+        u, v = cls.plane_basis(outer)
+        origin = Vector(outer[0])
+
+        def _project_xy(ring):
+            return [((Vector(co) - origin).dot(u), (Vector(co) - origin).dot(v)) for co in ring]
+
+        projected_xy = [_project_xy(ring) for ring in polyline_list]
+        projected = [[Vector((x, y, 0.0)) for x, y in ring] for ring in projected_xy]
+        triangles = tessellate_polygon(projected)
+
+        n_total = sum(len(r) for r in projected_xy)
+        used = {i for tri in triangles for i in tri}
+        if triangles and len(used) >= n_total:
+            return triangles
+
+        fallback = cls._tessellate_via_shapely(projected_xy)
+        return fallback if fallback else triangles
+
+    @classmethod
+    def _tessellate_via_shapely(cls, projected_xy: list[list[tuple[float, float]]]) -> list[tuple[int, int, int]]:
+        """Constrained-Delaunay fallback for :meth:`tessellate_ring_planar`.
+
+        Honours the polygon's boundary AND holes. Returns ``[]`` when
+        shapely is unavailable or the polygon can't be cleaned via
+        ``buffer(0)``.
+        """
+        try:
+            from shapely.geometry import Polygon
+        except Exception:
+            return []
+        outer = projected_xy[0]
+        inners = projected_xy[1:]
+        if len(outer) < 3:
+            return []
+        try:
+            poly = Polygon(outer, inners)
+            poly = poly if poly.is_valid else poly.buffer(0)
+            if poly.is_empty:
+                return []
+        except Exception:
+            return []
+
+        flat = list(outer)
+        for r in inners:
+            flat.extend(r)
+
+        def _key(x, y):
+            return (round(x, 6), round(y, 6))
+
+        index_of: dict[tuple[float, float], int] = {}
+        for idx, (x, y) in enumerate(flat):
+            index_of.setdefault(_key(x, y), idx)
+
+        try:
+            from shapely import constrained_delaunay_triangles
+
+            res = constrained_delaunay_triangles(poly)
+            tri_geoms = list(getattr(res, "geoms", []) or [])
+        except Exception:
+            try:
+                from shapely.ops import triangulate
+
+                tri_geoms = [t for t in triangulate(poly) if poly.contains(t.representative_point())]
+            except Exception:
+                return []
+
+        out: list[tuple[int, int, int]] = []
+        for t in tri_geoms:
+            coords = list(t.exterior.coords)[:-1]
+            if len(coords) != 3:
+                continue
+            idxs = [index_of.get(_key(x, y)) for x, y in coords]
+            if any(i is None for i in idxs):
+                continue
+            out.append(tuple(idxs))
+        return out
+
+    @classmethod
+    def corners_might_cross_clip_planes(
+        cls,
+        planes: tuple[tuple[float, float, float, float], ...],
+        corners: Sequence[Vector],
+    ) -> bool:
+        """Conservative reject test: True if ``corners`` might cross the clip volume.
+
+        Returns False only when at least one plane has ALL corners on its
+        rejected side — meaning the convex hull of ``corners`` is fully
+        outside the clip volume and a per-mesh bisect can be skipped.
+        Returns True otherwise (possibly with false positives — never
+        false negatives), so callers always cap any object that actually
+        crosses the box. ``corners`` is typically the 8 world-space corners
+        of an object's bound box.
+        """
+        for a, b, c, d in planes:
+            if all(a * v.x + b * v.y + c * v.z + d < 0.0 for v in corners):
+                return False
+        return True
+
     def intersect_edge_plane_v2(v1, v2, plane_co, plane_no, eps=1e-9):
         """
         Numpy version of intersect_edge_plane

src/bonsai/bonsai/tool/connection.py

@@ -0,0 +1,168 @@
+# Bonsai - OpenBIM Blender Add-on
+# Copyright (C) 2026
+#
+# This file is part of Bonsai.
+#
+# Bonsai is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Bonsai is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Bonsai.  If not, see <http://www.gnu.org/licenses/>.
+#
+# This file was generated with the assistance of an AI coding tool.
+
+"""Generic discovery of the connection linking two IFC elements.
+
+Used by ``bim.disconnect_elements`` so the operator surface is one operator
+per disconnect intent (active vs. partner, identified by GlobalId) rather
+than one per rel class. Each lookup returns ``(subject, kind)`` tuples where
+``subject`` is the entity whose teardown effects the disconnect:
+
+- ``"path"`` — ``IfcRelConnectsPathElements`` (wall-wall, wall-roof, etc.).
+  ``subject`` is the rel; removing it disconnects.
+- ``"element-top"`` — ``IfcRelConnectsElements`` with ``Description=="TOP"``
+  (created by ``extend_walls_to_underside``). ``subject`` is the rel.
+- ``"element"`` — any other ``IfcRelConnectsElements``. ``subject`` is the rel.
+- ``"mep-pair-fitting"`` — two MEP elements joined via ``IfcRelConnectsPorts``
+  through a single bridging ``IfcFlowFitting``. ``subject`` is the fitting
+  itself; removing it disconnects. ``OBSTRUCTION`` fittings are excluded
+  here; those go through ``bim.mep_add_obstruction(mode=REMOVE)``.
+
+Add new kinds by extending :py:meth:`Connection.find_rels`. The dispatch in
+``bonsai.core.connection.disconnect_rel`` maps each kind to the right
+post-mutation cleanup; the AST forward-compat guard enforces coverage."""
+
+from __future__ import annotations
+
+from typing import TYPE_CHECKING
+
+import bonsai.tool as tool
+
+if TYPE_CHECKING:
+    import ifcopenshell
+
+
+class Connection:
+    @classmethod
+    def find_rels(
+        cls,
+        elem_a: ifcopenshell.entity_instance,
+        elem_b: ifcopenshell.entity_instance,
+    ) -> list[tuple[ifcopenshell.entity_instance, str]]:
+        """Return every supported connection linking ``elem_a`` to ``elem_b``
+        as a list of ``(subject, kind)`` tuples — ``subject`` is the entity
+        whose teardown effects the disconnect (the rel itself for
+        relationship-kinds, the bridging fitting for ``"mep-pair-fitting"``).
+        Walks both ``ConnectedTo`` and ``ConnectedFrom`` because either side
+        of a rel can be the relating element, and the same pair may carry
+        rels authored with opposite orientations."""
+        rels: list[tuple[ifcopenshell.entity_instance, str]] = []
+        seen: set[int] = set()
+
+        def _record(rel, kind):
+            if rel.id() not in seen:
+                seen.add(rel.id())
+                rels.append((rel, kind))
+
+        for rel in getattr(elem_a, "ConnectedTo", []) or ():
+            if rel.is_a("IfcRelConnectsPathElements") and getattr(rel, "RelatedElement", None) == elem_b:
+                _record(rel, "path")
+        for rel in getattr(elem_a, "ConnectedFrom", []) or ():
+            if rel.is_a("IfcRelConnectsPathElements") and getattr(rel, "RelatingElement", None) == elem_b:
+                _record(rel, "path")
+
+        for rel in getattr(elem_a, "ConnectedFrom", []) or ():
+            if rel.is_a("IfcRelConnectsElements") and getattr(rel, "RelatingElement", None) == elem_b:
+                kind = "element-top" if getattr(rel, "Description", None) == "TOP" else "element"
+                _record(rel, kind)
+        for rel in getattr(elem_a, "ConnectedTo", []) or ():
+            if rel.is_a("IfcRelConnectsElements") and getattr(rel, "RelatedElement", None) == elem_b:
+                kind = "element-top" if getattr(rel, "Description", None) == "TOP" else "element"
+                _record(rel, kind)
+
+        fitting = tool.System.find_bridging_fitting(elem_a, elem_b)
+        if fitting is not None:
+            _record(fitting, "mep-pair-fitting")
+
+        return rels
+
+    @classmethod
+    def find_rel(
+        cls,
+        elem_a: ifcopenshell.entity_instance,
+        elem_b: ifcopenshell.entity_instance,
+    ) -> tuple[ifcopenshell.entity_instance | None, str | None]:
+        """Return the first ``(subject, kind)`` or ``(None, None)``. Cheaper
+        than ``find_rels`` when callers only need to know whether a connection
+        exists or what kind it is."""
+        rels = cls.find_rels(elem_a, elem_b)
+        return rels[0] if rels else (None, None)
+
+    @classmethod
+    def find_rels_for_element(
+        cls,
+        elem: ifcopenshell.entity_instance,
+    ) -> list[tuple[ifcopenshell.entity_instance, str, ifcopenshell.entity_instance]]:
+        """Return every supported connection touching ``elem`` as
+        ``(subject, kind, partner)`` triples. ``partner`` is the *other*
+        element on the connection — the side cascade cleanup must operate on
+        when ``elem`` is being deleted.
+
+        Mirrors :py:meth:`find_rels`'s relationship-kind taxonomy. Notably
+        does NOT emit ``"mep-pair-fitting"`` triples: ``IfcRelConnectsPorts``
+        cleanup is owned by ``tool.Geometry.delete_ifc_object``'s
+        ``remove_port`` loop, which runs unconditionally on any IFC root
+        deletion. Including MEP here would cause the cascade to also remove
+        the bridging fitting when one of its connected segments is deleted —
+        a policy choice (fitting may still join other live segments) that's
+        better left to the user via the explicit disconnect operator.
+        """
+        result: list[tuple[ifcopenshell.entity_instance, str, ifcopenshell.entity_instance]] = []
+        seen: set[int] = set()
+
+        def _record(rel, kind, partner):
+            if partner is None or rel.id() in seen:
+                return
+            seen.add(rel.id())
+            result.append((rel, kind, partner))
+
+        for rel in getattr(elem, "ConnectedTo", []) or ():
+            if rel.is_a("IfcRelConnectsPathElements"):
+                _record(rel, "path", getattr(rel, "RelatedElement", None))
+            elif rel.is_a("IfcRelConnectsElements"):
+                kind = "element-top" if getattr(rel, "Description", None) == "TOP" else "element"
+                _record(rel, kind, getattr(rel, "RelatedElement", None))
+        for rel in getattr(elem, "ConnectedFrom", []) or ():
+            if rel.is_a("IfcRelConnectsPathElements"):
+                _record(rel, "path", getattr(rel, "RelatingElement", None))
+            elif rel.is_a("IfcRelConnectsElements"):
+                kind = "element-top" if getattr(rel, "Description", None) == "TOP" else "element"
+                _record(rel, kind, getattr(rel, "RelatingElement", None))
+
+        return result
+
+    @classmethod
+    def orient_element_top(
+        cls,
+        rel: ifcopenshell.entity_instance,
+        elem_a: ifcopenshell.entity_instance,
+        elem_b: ifcopenshell.entity_instance,
+    ) -> tuple[ifcopenshell.entity_instance, ifcopenshell.entity_instance]:
+        """Return ``(wall, slab)`` for an ``IfcRelConnectsElements(TOP)`` rel.
+
+        The ``extend_walls_to_underside`` flow stores slab as the relating
+        side and wall as related — orientation is recovered by checking
+        which input matches which rel attribute. Callers pass any two
+        elements; this resolves which is the wall and which is the slab so
+        post-disconnect cleanup (regenerate-wall-to-underside) targets the
+        right object."""
+        if getattr(rel, "RelatingElement", None) == elem_a:
+            return elem_b, elem_a
+        return elem_a, elem_b

src/bonsai/bonsai/tool/drawing.py

@@ -78,6 +78,7 @@ if TYPE_CHECKING:
 
 class Drawing(bonsai.core.tool.Drawing):
     ANNOTATION_DATA_TYPE = Literal["empty", "curve", "mesh"]
+    PERSPECTIVE_CAMERA_SHIFT_PROPERTIES = ("PerspectiveShiftX", "PerspectiveShiftY")
     DOCUMENT_TYPE = Literal["SCHEDULE", "REFERENCE"]
     LocationHintLiteral = Literal["PERSPECTIVE", "ORTHOGRAPHIC", "NORTH", "SOUTH", "EAST", "WEST"]
     LOCATION_HINT_LITERALS = ("PERSPECTIVE", "ORTHOGRAPHIC", "NORTH", "SOUTH", "EAST", "WEST")
@@ -453,6 +454,41 @@ class Drawing(bonsai.core.tool.Drawing):
         camera.matrix_world = matrix
         return camera
 
+    @classmethod
+    def get_perspective_camera_shifts(cls, drawing: ifcopenshell.entity_instance) -> dict[str, float]:
+        pset = ifcopenshell.util.element.get_pset(drawing, "EPset_Drawing") or {}
+        shift_x_prop, shift_y_prop = cls.PERSPECTIVE_CAMERA_SHIFT_PROPERTIES
+        return {
+            "shift_x": float(pset.get(shift_x_prop, 0.0) or 0.0),
+            "shift_y": float(pset.get(shift_y_prop, 0.0) or 0.0),
+        }
+
+    @classmethod
+    def sync_perspective_camera_shifts(cls, drawing: ifcopenshell.entity_instance, camera: bpy.types.Camera) -> None:
+        if camera.type != "PERSP":
+            return
+
+        shift_x_prop, shift_y_prop = cls.PERSPECTIVE_CAMERA_SHIFT_PROPERTIES
+        current_shifts = cls.get_perspective_camera_shifts(drawing)
+        new_shifts = {"shift_x": float(camera.shift_x or 0.0), "shift_y": float(camera.shift_y or 0.0)}
+        if tool.Cad.is_x(current_shifts["shift_x"], new_shifts["shift_x"]) and tool.Cad.is_x(
+            current_shifts["shift_y"], new_shifts["shift_y"]
+        ):
+            return
+
+        ifc_file = tool.Ifc.get()
+        pset = tool.Pset.get_element_pset(drawing, "EPset_Drawing")
+        if not pset:
+            pset = ifcopenshell.api.pset.add_pset(ifc_file, product=drawing, name="EPset_Drawing")
+        ifcopenshell.api.pset.edit_pset(
+            ifc_file,
+            pset=pset,
+            properties={
+                shift_x_prop: new_shifts["shift_x"],
+                shift_y_prop: new_shifts["shift_y"],
+            },
+        )
+
     @classmethod
     def create_svg_schedule(cls, schedule: ifcopenshell.entity_instance) -> None:
         import bonsai.bim.module.drawing.scheduler as scheduler
@@ -1009,6 +1045,8 @@ class Drawing(bonsai.core.tool.Drawing):
         camera_props.has_annotation = True
         camera_props.target_view = "PLAN_VIEW"
         camera_props.is_nts = False
+        camera.shift_x = 0.0
+        camera.shift_y = 0.0
 
         pset = ifcopenshell.util.element.get_pset(drawing, "EPset_Drawing")
         if pset:
@@ -1044,6 +1082,10 @@ class Drawing(bonsai.core.tool.Drawing):
                 camera_props.fill_mode = str(pset["FillMode"])
             if "CutMode" in pset:
                 camera_props.cut_mode = str(pset["CutMode"])
+            if camera.type == "PERSP":
+                shifts = cls.get_perspective_camera_shifts(drawing)
+                camera.shift_x = shifts["shift_x"]
+                camera.shift_y = shifts["shift_y"]
 
         camera_props.update_props = update_props
 
@@ -2267,14 +2309,19 @@ class Drawing(bonsai.core.tool.Drawing):
         cls, drawing: ifcopenshell.entity_instance, ifc_file: Optional[ifcopenshell.file] = None
     ) -> set[ifcopenshell.entity_instance]:
         """returns a set of elements that are included in the drawing"""
-        if ifc_file is None:
+        param_was_none = ifc_file is None
+        if param_was_none:
             ifc_file = tool.Ifc.get()
-            elements = cls.get_elements_in_camera_view(tool.Ifc.get_object(drawing), bpy.data.objects)
-        else:
-            # This can probably be smarter
-            elements = set(ifc_file.by_type("IfcElement"))
         pset = ifcopenshell.util.element.get_psets(drawing).get("EPset_Drawing", {})
         include = pset.get("Include", None)
+
+        # Only the active IFC file has Blender objects we can test against the
+        # camera's view frustum, which lets us drop elements - including those
+        # picked by an Include filter - that fall outside the drawing boundary.
+        camera_view_elements = None
+        if (param_was_none or include) and ifc_file is tool.Ifc.get():
+            camera_view_elements = cls.get_elements_in_camera_view(tool.Ifc.get_object(drawing), bpy.data.objects)
+
         if include:
             try:
                 data = json.loads(include)
@@ -2286,7 +2333,16 @@ class Drawing(bonsai.core.tool.Drawing):
                     elements = ifcopenshell.util.selector.filter_elements(ifc_file, include)
             except (json.JSONDecodeError, ValueError):
                 elements = ifcopenshell.util.selector.filter_elements(ifc_file, include)
+            # The Include filter chooses which elements may appear, but they must
+            # still fall within the drawing's camera boundary.
+            if camera_view_elements is not None:
+                elements &= camera_view_elements
         else:
+            if param_was_none:
+                elements = camera_view_elements
+            else:
+                # This can probably be smarter
+                elements = set(ifc_file.by_type("IfcElement"))
             if ifc_file.schema == "IFC2X3":
                 base_elements = set(ifc_file.by_type("IfcElement") + ifc_file.by_type("IfcSpatialStructureElement"))
             else:
@@ -2384,13 +2440,13 @@ class Drawing(bonsai.core.tool.Drawing):
     @classmethod
     def is_drawing_active(cls) -> bool:
         camera = bpy.context.scene.camera
-        area = tool.Blender.get_view3d_area()
-        return bool(
-            camera is not None
-            and camera.type == "CAMERA"
-            and tool.Blender.get_ifc_definition_id(camera)
-            and area is not None
-        )
+        if not (camera is not None and camera.type == "CAMERA" and tool.Blender.get_ifc_definition_id(camera)):
+            return False
+        # A VIEW_3D area is meaningless (and unobtainable) in background
+        # mode, but isn't otherwise required to generate a drawing.
+        if bpy.app.background:
+            return True
+        return tool.Blender.get_view3d_area() is not None
 
     @classmethod
     def is_camera_orthographic(cls) -> bool:
@@ -2521,10 +2577,19 @@ class Drawing(bonsai.core.tool.Drawing):
                     has_context = True
                     break
 
+        linked_handles: set[bpy.types.Object] = set()
+        for link in tool.Project.get_project_props().get_loaded_links_for_drawings():
+            try:
+                handle = tool.Project.get_link_empty_handle(link)
+            except Exception:
+                continue
+            if handle:
+                linked_handles.add(handle)
+
         visible_objects = []
         for obj in bpy.context.view_layer.objects:
             if element := tool.Ifc.get_entity(obj):
-                if element in filtered_elements:
+                if element in filtered_elements or obj in linked_handles:
                     visible_objects.append(obj)
             else:
                 if obj.hide_get() is False:

src/bonsai/bonsai/tool/duplicate.py

@@ -248,32 +248,30 @@ class Duplicate(bonsai.core.tool.Duplicate):
         old_to_new: dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]],
     ) -> None:
         for element, data in relationship.items():
-            try:
-                new_relating_element = old_to_new.get(data.relating_element)[0]
-                new_related_element = old_to_new.get(data.related_element)[0]
-            except (KeyError, IndexError, TypeError):
-                continue
-            new_rel = tool.Ifc.run(
-                "geometry.connect_path",
-                relating_element=new_relating_element,
-                related_element=new_related_element,
-                relating_connection=data.relating_connection_type,
-                related_connection=data.related_connection_type,
-            )
+            new_relating_elements = old_to_new.get(data.relating_element) or []
+            new_related_elements = old_to_new.get(data.related_element) or []
             # connect_path hardcodes priorities to []; restore them post-hoc.
             priority_attrs: dict[str, Any] = {}
             if data.relating_priorities:
                 priority_attrs["RelatingPriorities"] = data.relating_priorities
             if data.related_priorities:
                 priority_attrs["RelatedPriorities"] = data.related_priorities
-            if new_rel is not None and priority_attrs:
-                try:
-                    tool.Ifc.run("attribute.edit_attributes", product=new_rel, attributes=priority_attrs)
-                except (RuntimeError, ifcopenshell.Error) as e:
-                    cls._emit_warning(
-                        f"connection priority restore failed for {new_rel}; "
-                        f"duplicate has empty RelatingPriorities/RelatedPriorities: {e}"
-                    )
+            for new_relating_element, new_related_element in zip(new_relating_elements, new_related_elements):
+                new_rel = tool.Ifc.run(
+                    "geometry.connect_path",
+                    relating_element=new_relating_element,
+                    related_element=new_related_element,
+                    relating_connection=data.relating_connection_type,
+                    related_connection=data.related_connection_type,
+                )
+                if new_rel is not None and priority_attrs:
+                    try:
+                        tool.Ifc.run("attribute.edit_attributes", product=new_rel, attributes=priority_attrs)
+                    except (RuntimeError, ifcopenshell.Error) as e:
+                        cls._emit_warning(
+                            f"connection priority restore failed for {new_rel}; "
+                            f"duplicate has empty RelatingPriorities/RelatedPriorities: {e}"
+                        )
 
     @classmethod
     def recreate_port_connections(
@@ -283,46 +281,43 @@ class Duplicate(bonsai.core.tool.Duplicate):
     ) -> None:
         """Recreate ``IfcRelConnectsPorts`` between duplicates; skip records whose duplicate's port count diverges from the snapshot."""
         for relating_element, records in snapshot.by_element.items():
+            new_relatings = old_to_new.get(relating_element) or []
+            expected_relating = snapshot.port_counts.get(relating_element)
             for record in records:
                 related_element = record.related_element
-                try:
-                    new_relating = old_to_new[relating_element][0]
-                    new_related = old_to_new[related_element][0]
-                except (KeyError, IndexError):
-                    continue
-
-                new_relating_ports = tool.System.get_ports(new_relating)
-                new_related_ports = tool.System.get_ports(new_related)
-
-                expected_relating = snapshot.port_counts.get(relating_element)
-                if expected_relating is not None and len(new_relating_ports) != expected_relating:
-                    cls._emit_warning(
-                        f"port reconnect skipped — duplicate has {len(new_relating_ports)} ports, "
-                        f"snapshot had {expected_relating}"
-                    )
-                    continue
+                new_relateds = old_to_new.get(related_element) or []
                 expected_related = snapshot.port_counts.get(related_element)
-                if expected_related is not None and len(new_related_ports) != expected_related:
-                    cls._emit_warning(
-                        f"port reconnect skipped — duplicate has {len(new_related_ports)} ports, "
-                        f"snapshot had {expected_related}"
-                    )
-                    continue
+                for new_relating, new_related in zip(new_relatings, new_relateds):
+                    new_relating_ports = tool.System.get_ports(new_relating)
+                    new_related_ports = tool.System.get_ports(new_related)
 
-                try:
-                    new_port_a = new_relating_ports[record.relating_port_index]
-                    new_port_b = new_related_ports[record.related_port_index]
-                except IndexError:
-                    cls._emit_warning(
-                        f"port reconnect skipped — record references port index past the duplicate's port list"
-                    )
-                    continue
-                try:
-                    tool.Ifc.run(
-                        "system.connect_port",
-                        port1=new_port_a,
-                        port2=new_port_b,
-                        direction=record.direction or "NOTDEFINED",
-                    )
-                except (RuntimeError, ifcopenshell.Error) as e:
-                    cls._emit_warning(f"port reconnect failed between duplicates: {e}")
+                    if expected_relating is not None and len(new_relating_ports) != expected_relating:
+                        cls._emit_warning(
+                            f"port reconnect skipped — duplicate has {len(new_relating_ports)} ports, "
+                            f"snapshot had {expected_relating}"
+                        )
+                        continue
+                    if expected_related is not None and len(new_related_ports) != expected_related:
+                        cls._emit_warning(
+                            f"port reconnect skipped — duplicate has {len(new_related_ports)} ports, "
+                            f"snapshot had {expected_related}"
+                        )
+                        continue
+
+                    try:
+                        new_port_a = new_relating_ports[record.relating_port_index]
+                        new_port_b = new_related_ports[record.related_port_index]
+                    except IndexError:
+                        cls._emit_warning(
+                            f"port reconnect skipped — record references port index past the duplicate's port list"
+                        )
+                        continue
+                    try:
+                        tool.Ifc.run(
+                            "system.connect_port",
+                            port1=new_port_a,
+                            port2=new_port_b,
+                            direction=record.direction or "NOTDEFINED",
+                        )
+                    except (RuntimeError, ifcopenshell.Error) as e:
+                        cls._emit_warning(f"port reconnect failed between duplicates: {e}")

src/bonsai/bonsai/tool/geometry.py

@@ -24,6 +24,7 @@ import multiprocessing
 import struct
 from collections import defaultdict
 from collections.abc import Generator, Iterable, Iterator
+from contextlib import contextmanager
 from math import pi, radians
 from typing import (
     TYPE_CHECKING,
@@ -65,6 +66,7 @@ from typing_extensions import TypeIs
 
 import bonsai.bim.helper
 import bonsai.bim.import_ifc
+import bonsai.core.connection
 import bonsai.core.drawing
 import bonsai.core.geometry
 import bonsai.core.root
@@ -129,6 +131,85 @@ class Geometry(bonsai.core.tool.Geometry):
         if cache and hasattr(element, "GlobalId"):
             cache.remove(element.GlobalId)
 
+    # Per-host work coalesced by `batch_host_recut`. Keys are voided element ifc ids;
+    # dict insertion preserves call ordering. Recut values store the representation at
+    # enqueue time, but the drain re-reads `get_active_representation` so the recut
+    # always reflects current IFC state.
+    _host_batch_depth: int = 0
+    _host_recut_queue: dict[int, tuple[bpy.types.Object, ifcopenshell.entity_instance]] = {}
+    _host_update_queue: dict[int, bpy.types.Object] = {}
+
+    @classmethod
+    @contextmanager
+    def batch_host_recut(cls) -> Generator[None, None, None]:
+        """Coalesce host body work — `recut_host` and `update_host_representation`
+        calls inside the with-block enqueue by voided element id. On the outermost
+        exit: every host's `update_representation` runs first (writes Blender mesh
+        back to IFC), then every host's `switch_representation` runs (reads IFC +
+        openings → Blender mesh). The two-phase order matters: a recut that ran
+        before the matching update_representation would re-tessellate against stale
+        IFC, losing the user's edits.
+
+        Nests safely — only the outermost exit drains. The depth counter and queues
+        are reset on exit even if the body raises."""
+        cls._host_batch_depth += 1
+        try:
+            yield
+        finally:
+            cls._host_batch_depth -= 1
+            if cls._host_batch_depth == 0:
+                update_queue = cls._host_update_queue
+                recut_queue = cls._host_recut_queue
+                cls._host_update_queue = {}
+                cls._host_recut_queue = {}
+                for voided_obj in update_queue.values():
+                    try:
+                        if not voided_obj or not voided_obj.data:
+                            continue
+                    except ReferenceError:
+                        # Blender object was deleted while the batch was open
+                        # (e.g. user removed it via the outliner mid-op).
+                        continue
+                    if tool.Ifc.get_entity(voided_obj) is None:
+                        continue
+                    bpy.ops.bim.update_representation(obj=voided_obj.name)
+                for voided_obj, _ in recut_queue.values():
+                    try:
+                        if not voided_obj or not voided_obj.data:
+                            continue
+                    except ReferenceError:
+                        continue
+                    if tool.Ifc.get_entity(voided_obj) is None:
+                        continue
+                    current_rep = cls.get_active_representation(voided_obj)
+                    if current_rep is None:
+                        continue
+                    bonsai.core.geometry.switch_representation(
+                        tool.Ifc, cls, obj=voided_obj, representation=current_rep
+                    )
+
+    @classmethod
+    def recut_host(cls, voided_obj: bpy.types.Object, representation: ifcopenshell.entity_instance) -> None:
+        """Recut a host's body representation. Inside `batch_host_recut`, enqueues
+        by voided element id; outside, fires `switch_representation` directly."""
+        if cls._host_batch_depth > 0:
+            element = tool.Ifc.get_entity(voided_obj)
+            if element is not None:
+                cls._host_recut_queue[element.id()] = (voided_obj, representation)
+            return
+        bonsai.core.geometry.switch_representation(tool.Ifc, cls, obj=voided_obj, representation=representation)
+
+    @classmethod
+    def update_host_representation(cls, voided_obj: bpy.types.Object) -> None:
+        """Run `bim.update_representation` on a host. Inside `batch_host_recut`,
+        enqueues by voided element id; outside, fires the operator directly."""
+        if cls._host_batch_depth > 0:
+            element = tool.Ifc.get_entity(voided_obj)
+            if element is not None:
+                cls._host_update_queue[element.id()] = voided_obj
+            return
+        bpy.ops.bim.update_representation(obj=voided_obj.name)
+
     @classmethod
     def has_axis_representation(cls, element: ifcopenshell.entity_instance) -> bool:
         """True if the element carries a shape representation whose
@@ -156,6 +237,112 @@ class Geometry(bonsai.core.tool.Geometry):
         for modifier in obj.modifiers:
             obj.modifiers.remove(modifier)
 
+    @classmethod
+    def _group_edges_into_loops(cls, edges) -> list[list]:
+        """Group an edge set into connected components by shared vertices.
+
+        Each returned group is a list of edges that share at least one
+        vertex chain. A hollow profile's bisect produces two disjoint
+        loops (outer ring + inner ring) — grouping splits them so each
+        can be filled independently as a separate cap face, rather than
+        ``contextual_create`` welding them into one solid outer face
+        with the inner loop demoted to interior decoration.
+        """
+        edge_set = set(edges)
+        visited: set = set()
+        groups: list[list] = []
+        for start in edges:
+            if start in visited:
+                continue
+            group: list = []
+            stack: list = [start]
+            while stack:
+                e = stack.pop()
+                if e in visited:
+                    continue
+                visited.add(e)
+                group.append(e)
+                for v in e.verts:
+                    for adj in v.link_edges:
+                        if adj in edge_set and adj not in visited:
+                            stack.append(adj)
+            groups.append(group)
+        return groups
+
+    @classmethod
+    def bisect_and_cap(
+        cls,
+        bm,
+        planes_local,
+        *,
+        tag_layer_name: str = "bbim_cap",
+        dist: float = 1e-4,
+        weld_dist: float = 1e-5,
+    ):
+        """Clip ``bm`` against each ``(plane_co, plane_no)`` and fill the cuts.
+
+        Per plane, ``bmesh.ops.bisect_plane(clear_outer=True)`` discards
+        the outside half-space and ``bmesh.ops.contextual_create`` fills
+        the resulting cut edges with cap faces tagged via a BMesh int
+        layer so the tag propagates to any split-children from subsequent
+        planes. After all planes, near-coincident vertices are welded
+        (``weld_dist``) so adjacent caps from the same cross-section
+        merge cleanly.
+
+        Callers are responsible for input mesh quality. Non-watertight
+        inputs (terrain, single-shell surfaces) may produce degenerate
+        cap faces; that's an accepted user-supplied data limitation.
+
+        Returns the cap-tag BMLayerItem, or ``None`` if ``bm`` is empty.
+        """
+        import bmesh
+
+        if not bm.faces:
+            return None
+
+        # Pre-weld nearby verts: T-junctions in messy IFC meshes (a third
+        # vertex sitting in the middle of an edge from a Boolean
+        # operation) make the bisect cut terminate early, leaving open
+        # loops that no fill op can close. Welding the T-junction's
+        # near-coincident vertex into the host edge before bisecting
+        # turns the cut into a closed loop.
+        bmesh.ops.remove_doubles(bm, verts=bm.verts[:], dist=max(weld_dist, 1e-4))
+
+        cap_layer = bm.faces.layers.int.new(tag_layer_name)
+        for plane_co, plane_no in planes_local:
+            geom = bm.verts[:] + bm.edges[:] + bm.faces[:]
+            if not geom:
+                break
+            results = bmesh.ops.bisect_plane(
+                bm,
+                geom=geom,
+                dist=dist,
+                plane_co=plane_co,
+                plane_no=plane_no,
+                clear_outer=True,
+            )
+            cut_edges = [e for e in results["geom_cut"] if isinstance(e, bmesh.types.BMEdge)]
+            if not cut_edges:
+                continue
+            # Group cut edges into connected components BEFORE filling.
+            # Feeding ``contextual_create`` all edges at once (outer +
+            # inner of a hollow profile) makes it create a SINGLE outer
+            # face and treat inner edges as decoration — collapsing the
+            # hole. Filling each connected loop separately produces one
+            # cap face per ring.
+            for loop_edges in cls._group_edges_into_loops(cut_edges):
+                try:
+                    fill = bmesh.ops.contextual_create(bm, geom=loop_edges)
+                except (RuntimeError, TypeError):
+                    continue
+                for f in fill.get("faces", []):
+                    if isinstance(f, bmesh.types.BMFace) and f.is_valid:
+                        f[cap_layer] = 1
+
+        if weld_dist > 0.0:
+            bmesh.ops.remove_doubles(bm, verts=bm.verts[:], dist=weld_dist)
+        return cap_layer
+
     @classmethod
     def clear_scale(cls, obj: bpy.types.Object) -> None:
         """Apply and clear object scale.
@@ -271,12 +458,38 @@ class Geometry(bonsai.core.tool.Geometry):
         bpy.data.objects.remove(obj)
 
     @classmethod
-    def delete_ifc_object(cls, obj: bpy.types.Object) -> None:
+    def delete_ifc_object(
+        cls,
+        obj: bpy.types.Object,
+        batch_being_deleted_ids: Optional[set[int]] = None,
+    ) -> None:
         ifc_file = tool.Ifc.get()
         element = tool.Ifc.get_entity(obj)
         if not element:
             return
-        elif element.is_a("IfcAnnotation"):
+        # Cascade connection-rel teardown — symmetric to bim.disconnect_elements.
+        # When a slab connected to a wall via IfcRelConnectsElements(TOP) is deleted,
+        # the wall's trim booleans + BBIM_Boolean pset would otherwise be orphaned.
+        # skip_elem_recreate is always True here because we're inside delete: the
+        # element is about to vanish, so re-extruding it would be wasted work.
+        # skip_partner_recreate fires only when the partner is also queued in the
+        # same OverrideDelete batch.
+        if element.is_a("IfcRoot"):
+            skip_ids = batch_being_deleted_ids or set()
+            for subject, kind, partner in tool.Connection.find_rels_for_element(element):
+                bonsai.core.connection.disconnect_rel(
+                    tool.Ifc,
+                    tool.Geometry,
+                    tool.Model,
+                    tool.Connection,
+                    subject=subject,
+                    kind=kind,
+                    elem=element,
+                    partner=partner,
+                    skip_elem_recreate=True,
+                    skip_partner_recreate=(partner.id() in skip_ids),
+                )
+        if element.is_a("IfcAnnotation"):
             if element.ObjectType == "DRAWING":
                 return bonsai.core.drawing.remove_drawing(tool.Ifc, tool.Drawing, drawing=element)
             elif tool.Drawing.is_auto_annotation(element):
@@ -641,7 +854,13 @@ class Geometry(bonsai.core.tool.Geometry):
             and isinstance(data, Geometry.TYPES_WITH_MESH_PROPERTIES)
             and (ifc_id := tool.Geometry.get_mesh_props(data).ifc_definition_id)
         ):
-            return tool.Ifc.get().by_id(ifc_id)
+            try:
+                return tool.Ifc.get().by_id(ifc_id)
+            except RuntimeError:
+                # Stale id: a representation rebuild freed the old entity
+                # while obj.data still tracks its id. Treated as "no active
+                # representation" — same contract as a mesh with id 0.
+                return None
 
     @classmethod
     def get_data_representation(cls, data: bpy.types.ID) -> ifcopenshell.entity_instance | None:
@@ -849,15 +1068,6 @@ class Geometry(bonsai.core.tool.Geometry):
                 return True
         return False
 
-    @classmethod
-    def has_material_styles(cls, element: ifcopenshell.entity_instance) -> bool:
-        """True when any of ``element``'s materials exposes an
-        ``IfcSurfaceStyle``. Gate body-style assignment to avoid double-styling."""
-        return any(
-            tool.Material.get_style(material) is not None
-            for material in ifcopenshell.util.element.get_materials(element)
-        )
-
     @classmethod
     def reimport_element_representations(
         cls, obj: bpy.types.Object, representation: ifcopenshell.entity_instance, apply_openings: bool = True
@@ -2279,84 +2489,16 @@ class Geometry(bonsai.core.tool.Geometry):
         old_obj_name_to_new_obj_name: dict[str, str] = {}
 
         for obj in objects_to_duplicate:
-            element = tool.Ifc.get_entity(obj)
-            if element:
-                if element.is_a("IfcAnnotation") and element.ObjectType == "DRAWING":
-                    tool.Blender.deselect_object(obj)
-                    continue  # For now, don't copy drawings until we stabilise a bit more. It's tricky.
-                elif tool.Geometry.is_locked(element):
-                    tool.Blender.deselect_object(obj)
-                    continue
-            elif tool.Geometry.is_representation_item(obj):
-                cls.duplicate_ifc_item(obj)
-                continue
-
-            tracked_opening_type = tool.Model.get_tracked_opening_type(obj)
-            is_tracked_opening = bool(tracked_opening_type)
-            keep_data_linked = linked and not element and not is_tracked_opening
-
-            # Prior to duplicating, sync the object placement to make decomposition recreation more stable.
-            cls.commit_placement_if_moved(obj, apply_scale=False)
-
-            new_obj = obj.copy()
-            temp_data = None
-
-            # Currently for optimization we do not apply pending changes (scale or changed .data)
-            # to the original and duplicated objects.
-            # Keep new object edited if original is.
-            if tool.Ifc.is_edited(obj, ignore_scale=True):
-                tool.Ifc.edit(new_obj)
-
-            if obj.data and not keep_data_linked:
-                # assure root.copy_class won't replace the previous mesh globally
-                temp_data = obj.data.copy()
-                new_obj.data = temp_data
-
-                # Unlink from previous boolean element
-                # and keep object tracked for decorations.
-                if is_tracked_opening:
-                    mprops = tool.Geometry.get_mesh_props(new_obj.data)
-                    mprops.ifc_boolean_id = 0
-                    tool.Root.add_tracked_opening(new_obj, tracked_opening_type)
-
-            if obj == active_object:
-                new_active_obj = new_obj
-            for collection in obj.users_collection:
-                collection.objects.link(new_obj)
-            obj.select_set(False)
-            new_obj.select_set(True)
-            old_obj_name_to_new_obj_name[obj.name] = new_obj.name
-
-            if not element:
-                continue
-
-            # clear object's collection so it will be able to have it's own
-            tool.Blender.get_object_bim_props(new_obj).collection = None
-            # copy the actual class
-            new = bonsai.core.root.copy_class(tool.Ifc, tool.Collector, tool.Geometry, tool.Root, obj=new_obj)
-
-            # clean up the orphaned mesh with ifc id of the original object to avoid confusion
-            # IfcGridAxis keeps the same mesh data (it's pointing to ifc id 0, so it's not a problem)
-            if new and temp_data and not new.is_a("IfcGridAxis"):
-                if new.is_a("IfcRelSpaceBoundary"):
-                    surface = new.ConnectionGeometry.SurfaceOnRelatingElement
-                    temp_data.name = f"0/{surface.id()}"
-                    tool.Ifc.link(surface, temp_data)
-                else:
-                    tool.Blender.remove_data_block(temp_data)
-
-            if new:
-                # TODO: handle array data for other cases of duplication
-                array_data = arrays_to_duplicate.get(obj, None)
-                tool.Model.handle_array_on_copied_element(new, array_data)
-                if array_data:
-                    for child in tool.Array.get_all_children_objects(new):
-                        child.select_set(True)
-
-                # TODO: add new array children to recreate their decomposition too
-                old_to_new[element] = [new]
-                if new.is_a("IfcRelSpaceBoundary"):
-                    tool.Boundary.decorate_boundary(new_obj)
+            new_active = cls._duplicate_ifc_object_once(
+                obj,
+                active_object,
+                linked,
+                arrays_to_duplicate,
+                old_to_new,
+                old_obj_name_to_new_obj_name,
+            )
+            if new_active is not None:
+                new_active_obj = new_active
 
         # Remap Blender parent relationships for duplicated objects
         for old_obj_name, new_obj_name in old_obj_name_to_new_obj_name.items():
@@ -2384,10 +2526,211 @@ class Geometry(bonsai.core.tool.Geometry):
         # Recreate decompositions
         tool.Duplicate.recreate_decompositions(decomposition_relationships, old_to_new)
         cls.remove_linked_aggregate_data(old_to_new)
+
+        # In-loop regenerate_wall runs before recreate_connections, so any new
+        # walls that just received an IfcRelConnectsPathElements have stale
+        # junction geometry — recalculate them now that their connection graph
+        # is complete.
+        cls._recalculate_walls_with_new_connections(old_to_new)
+
         bonsai.bim.handler.refresh_ui_data()
         tool.Root.reload_grid_decorator()
         return old_to_new, new_active_obj or active_object
 
+    @classmethod
+    def duplicate_ifc_object_n_times(
+        cls, source: bpy.types.Object, count: int
+    ) -> dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]]:
+        """N-way duplicate of a single source.
+
+        Same per-copy semantics as duplicate_ifc_objects (IFC class copy,
+        decomposition + connection recreation, body regen for walls), but
+        bypasses the set() dedupe and the arrays_to_duplicate pre-scan so
+        callers building a fresh array don't pay per-call overhead N times.
+        Returns the same old_to_new dict shape, with the source element
+        mapping to the N new entities."""
+        if count <= 0:
+            return {}
+
+        sources = {source}
+        decomposition_relationships = tool.Duplicate.get_decomposition_relationships(sources)
+        connection_relationships = tool.Duplicate.get_connection_relationships(sources)
+        port_connection_snapshot = tool.Duplicate.get_port_connection_relationships(sources)
+        old_to_new: dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]] = {}
+        old_obj_name_to_new_obj_name: dict[str, str] = {}
+
+        for _ in range(count):
+            cls._duplicate_ifc_object_once(
+                source,
+                None,
+                False,
+                {},
+                old_to_new,
+                old_obj_name_to_new_obj_name,
+                keep_source_selected=True,
+            )
+
+        for old_obj_name, new_obj_name in old_obj_name_to_new_obj_name.items():
+            new_obj = bpy.data.objects.get(new_obj_name)
+            if new_obj and new_obj.parent and new_obj.parent.name in old_obj_name_to_new_obj_name:
+                world_matrix = new_obj.matrix_world.copy()
+                new_parent_name = old_obj_name_to_new_obj_name[new_obj.parent.name]
+                new_parent = bpy.data.objects.get(new_parent_name)
+                if new_parent:
+                    new_obj.parent = new_parent
+                    new_obj.matrix_world = world_matrix
+
+        for old in old_to_new.keys():
+            if old.is_a("IfcElementAssembly"):
+                tool.Root.recreate_aggregate(old_to_new)
+
+        cls.remove_old_connections(old_to_new)
+        tool.Duplicate.recreate_connections(connection_relationships, old_to_new)
+        tool.Duplicate.recreate_port_connections(port_connection_snapshot, old_to_new)
+        tool.Duplicate.recreate_decompositions(decomposition_relationships, old_to_new)
+        cls.remove_linked_aggregate_data(old_to_new)
+        cls._recalculate_walls_with_new_connections(old_to_new)
+        bonsai.bim.handler.refresh_ui_data()
+        tool.Root.reload_grid_decorator()
+        return old_to_new
+
+    @classmethod
+    def _duplicate_ifc_object_once(
+        cls,
+        obj: bpy.types.Object,
+        active_object: Optional[bpy.types.Object],
+        linked: bool,
+        arrays_to_duplicate: dict[bpy.types.Object, Any],
+        old_to_new: dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]],
+        old_obj_name_to_new_obj_name: dict[str, str],
+        keep_source_selected: bool = False,
+    ) -> Optional[bpy.types.Object]:
+        """Per-source body of the duplicate flow. Mutates old_to_new and
+        old_obj_name_to_new_obj_name in place. Returns new_obj when obj is
+        the active_object, else None.
+
+        keep_source_selected: when True, skip the source deselect so batched
+        callers can run N iterations without N×2 select flips and without
+        needing a post-loop restore on the source."""
+        new_active_obj: Optional[bpy.types.Object] = None
+        element = tool.Ifc.get_entity(obj)
+        if element:
+            if element.is_a("IfcAnnotation") and element.ObjectType == "DRAWING":
+                tool.Blender.deselect_object(obj)
+                return None  # For now, don't copy drawings until we stabilise a bit more. It's tricky.
+            elif tool.Geometry.is_locked(element):
+                tool.Blender.deselect_object(obj)
+                return None
+        elif tool.Geometry.is_representation_item(obj):
+            cls.duplicate_ifc_item(obj)
+            return None
+
+        tracked_opening_type = tool.Model.get_tracked_opening_type(obj)
+        is_tracked_opening = bool(tracked_opening_type)
+        keep_data_linked = linked and not element and not is_tracked_opening
+
+        # Prior to duplicating, sync the object placement to make decomposition recreation more stable.
+        cls.commit_placement_if_moved(obj, apply_scale=False)
+
+        new_obj = obj.copy()
+        temp_data = None
+
+        # Currently for optimization we do not apply pending changes (scale or changed .data)
+        # to the original and duplicated objects.
+        # Keep new object edited if original is.
+        if tool.Ifc.is_edited(obj, ignore_scale=True):
+            tool.Ifc.edit(new_obj)
+
+        if obj.data and not keep_data_linked:
+            # assure root.copy_class won't replace the previous mesh globally
+            temp_data = obj.data.copy()
+            new_obj.data = temp_data
+
+            # Unlink from previous boolean element
+            # and keep object tracked for decorations.
+            if is_tracked_opening:
+                mprops = tool.Geometry.get_mesh_props(new_obj.data)
+                mprops.ifc_boolean_id = 0
+                tool.Root.add_tracked_opening(new_obj, tracked_opening_type)
+
+        if obj == active_object:
+            new_active_obj = new_obj
+        for collection in obj.users_collection:
+            collection.objects.link(new_obj)
+        if not keep_source_selected:
+            obj.select_set(False)
+        new_obj.select_set(True)
+        old_obj_name_to_new_obj_name[obj.name] = new_obj.name
+
+        if not element:
+            return new_active_obj
+
+        # clear object's collection so it will be able to have it's own
+        tool.Blender.get_object_bim_props(new_obj).collection = None
+        # copy the actual class
+        new = bonsai.core.root.copy_class(tool.Ifc, tool.Collector, tool.Geometry, tool.Root, obj=new_obj)
+
+        # clean up the orphaned mesh with ifc id of the original object to avoid confusion
+        # IfcGridAxis keeps the same mesh data (it's pointing to ifc id 0, so it's not a problem)
+        if new and temp_data and not new.is_a("IfcGridAxis"):
+            if new.is_a("IfcRelSpaceBoundary"):
+                surface = new.ConnectionGeometry.SurfaceOnRelatingElement
+                temp_data.name = f"0/{surface.id()}"
+                tool.Ifc.link(surface, temp_data)
+            else:
+                tool.Blender.remove_data_block(temp_data)
+
+        if new:
+            # TODO: handle array data for other cases of duplication
+            array_data = arrays_to_duplicate.get(obj, None)
+            tool.Model.handle_array_on_copied_element(new, array_data)
+            if array_data:
+                for child in tool.Array.get_all_children_objects(new):
+                    child.select_set(True)
+
+            # TODO: add new array children to recreate their decomposition too
+            old_to_new.setdefault(element, []).append(new)
+            if new.is_a("IfcRelSpaceBoundary"):
+                tool.Boundary.decorate_boundary(new_obj)
+            # Slab-trim booleans (from extend_walls_to_underside) belong to
+            # the source wall's connection, not the copy. Strip them so the
+            # duplicate reverts to its pre-clip extrusion — mirrors the way
+            # filling rels are dropped while manual booleans persist on copy.
+            # Reload the body when something was stripped so the viewport
+            # immediately shows the unclipped geometry; otherwise the user
+            # sees a stale mesh until they Shift+G, which is easy to miss.
+            if new.is_a("IfcWall"):
+                if tool.Model.strip_underside_booleans(new):
+                    tool.Model.reload_body_representation(new_obj)
+                # HasOpenings rels don't follow object duplication, so
+                # the duplicate's body must rebuild to match its current
+                # opening set.
+                else:
+                    tool.Model.regenerate_wall(new_obj)
+
+        return new_active_obj
+
+    @classmethod
+    def _recalculate_walls_with_new_connections(
+        cls, old_to_new: dict[ifcopenshell.entity_instance, list[ifcopenshell.entity_instance]]
+    ) -> None:
+        """Recalculate new IfcWall duplicates that just received an
+        ``IfcRelConnectsPathElements``. The in-loop ``regenerate_wall`` runs
+        before ``recreate_connections``, so wall body geometry doesn't reflect
+        the junction until this second pass."""
+        walls_to_recalc: list[bpy.types.Object] = []
+        for new_list in old_to_new.values():
+            for new_entity in new_list:
+                if not new_entity.is_a("IfcWall"):
+                    continue
+                if not (getattr(new_entity, "ConnectedTo", None) or getattr(new_entity, "ConnectedFrom", None)):
+                    continue
+                new_obj = tool.Ifc.get_object(new_entity)
+                if new_obj is not None:
+                    walls_to_recalc.append(new_obj)
+        if walls_to_recalc:
+            tool.Model.recalculate_walls(walls_to_recalc)
+
     @classmethod
     def duplicate_ifc_item(cls, obj: bpy.types.Object) -> None:
         props = tool.Geometry.get_geometry_props()
@@ -2439,7 +2782,10 @@ class Geometry(bonsai.core.tool.Geometry):
             pset = ifcopenshell.util.element.get_pset(element, "BBIM_Array")
             if not pset:
                 continue
-            array_parents.add(tool.Ifc.get().by_guid(pset["Parent"]))
+            try:
+                array_parents.add(tool.Ifc.get().by_guid(pset["Parent"]))
+            except RuntimeError:
+                continue
 
         for array_parent in array_parents:
             array_parent_obj = tool.Ifc.get_object(array_parent)

src/bonsai/bonsai/tool/loader.py

@@ -189,7 +189,7 @@ class Loader(bonsai.core.tool.Loader):
                 uv_mode = "Generated"
             elif coordinates.is_a("IfcTextureCoordinateGenerator") and coordinates.Mode == "COORD-EYE":
                 uv_mode = "Camera"
-        surface_texture["uv_mode"] = uv_mode or "Generated"
+        surface_texture["uv_mode"] = uv_mode or "UV"
         return surface_texture
 
     @classmethod
@@ -315,7 +315,7 @@ class Loader(bonsai.core.tool.Loader):
                     image_url = str(image_url)
                     if is_relative and bpy.data.filepath:
                         image_url = bpy.path.relpath(image_url)
-                    return bpy.data.images.load(image_url)
+                    return bpy.data.images.load(image_url, check_existing=True)
 
                 elif texture["type"] == "IfcBlobTexture":
                     # https://blender.stackexchange.com/questions/173206/how-to-efficiently-convert-a-pil-image-to-bpy-types-image
@@ -472,12 +472,23 @@ class Loader(bonsai.core.tool.Loader):
                         print(f"{mode} Mode texture will be skipped.")
                     continue
 
-                if (image := get_image) is None:
+                if (image := get_image()) is None:
                     continue
 
-                # remove RGB node from `create_surface_style_rendering`
-                prev_node = bsdf.inputs[2].links[0].from_node
-                blender_material.node_tree.nodes.remove(prev_node)
+                # Replace whatever currently feeds the FLAT color input (RGB or previous texture chain).
+                for link in list(bsdf.inputs[2].links):
+                    prev_node = link.from_node
+                    blender_material.node_tree.links.remove(link)
+                    if prev_node.type == "TEX_IMAGE":
+                        # Remove linked texture coordinate node if it's no longer used.
+                        for vec_link in list(prev_node.inputs["Vector"].links):
+                            coord_node = vec_link.from_node
+                            blender_material.node_tree.links.remove(vec_link)
+                            if coord_node.type == "TEX_COORD" and not any(o.links for o in coord_node.outputs):
+                                blender_material.node_tree.nodes.remove(coord_node)
+                        blender_material.node_tree.nodes.remove(prev_node)
+                    elif prev_node.type == "RGB":
+                        blender_material.node_tree.nodes.remove(prev_node)
 
                 node = blender_material.node_tree.nodes.new(type="ShaderNodeTexImage")
                 node.location = bsdf.location - Vector((200, 250))
@@ -1216,7 +1227,7 @@ class Loader(bonsai.core.tool.Loader):
     ) -> bool:
         items = [i["item"] for i in ifcopenshell.util.representation.resolve_items(representation)]
         if len(items) == 1 and items[0].is_a("IfcSweptDiskSolid"):
-            if tool.Blender.Modifier.is_railing(element):
+            if tool.Parametric.is_railing(element):
                 return False
             return True
         elif len(items) and (  # See #2508 why we accommodate for invalid IFCs here
@@ -1224,7 +1235,7 @@ class Loader(bonsai.core.tool.Loader):
             and len({i.is_a() for i in items}) == 1
             and len({i.Radius for i in items}) == 1
         ):
-            if tool.Blender.Modifier.is_railing(element):
+            if tool.Parametric.is_railing(element):
                 return False
             return True
         return False

src/bonsai/bonsai/tool/misc.py

@@ -227,10 +227,8 @@ class Misc(bonsai.core.tool.Misc):
 
     @classmethod
     def set_object_origin_to_bottom(cls, obj: bpy.types.Object) -> None:
-        absolute_bound_box = [obj.matrix_world @ Vector(c) for c in obj.bound_box]
-        min_z = min([c[2] for c in absolute_bound_box])
         new_origin = obj.matrix_world.translation.copy()
-        new_origin[2] = min_z
+        new_origin[2] = tool.Blender.get_object_world_bounding_box(obj)["min_z"]
         assert isinstance(obj.data, bpy.types.Mesh)
         obj.data.transform(
             Matrix.Translation(
@@ -249,11 +247,8 @@ class Misc(bonsai.core.tool.Misc):
 
     @classmethod
     def scale_object_to_height(cls, obj: bpy.types.Object, height: float) -> None:
-        absolute_bound_box = [obj.matrix_world @ Vector(c) for c in obj.bound_box]
-        max_z = max([c[2] for c in absolute_bound_box])
-        min_z = min([c[2] for c in absolute_bound_box])
-        current_absolute_height = max_z - min_z
-        scale_factor = height / current_absolute_height
+        bbox = tool.Blender.get_object_world_bounding_box(obj)
+        scale_factor = height / (bbox["max_z"] - bbox["min_z"])
         obj.matrix_world @= Matrix.Scale(
             scale_factor, 4, obj.matrix_world.inverted().to_quaternion() @ Vector((0, 0, 1))
         )

src/bonsai/bonsai/tool/model.py

@@ -59,6 +59,7 @@ from ifcopenshell.util.shape_builder import ShapeBuilder, np_to_3d
 from mathutils import Matrix, Vector
 
 import bonsai.core.geometry
+import bonsai.core.model
 import bonsai.core.tool
 import bonsai.tool as tool
 from bonsai.bim import import_ifc
@@ -75,11 +76,14 @@ if TYPE_CHECKING:
     from bonsai.bim.module.model.prop import (
         BIMArrayProperties,
         BIMDoorProperties,
+        BIMDuctSegmentProperties,
         BIMExternalParametricGeometryProperties,
         BIMModelProperties,
+        BIMPipeSegmentProperties,
         BIMPolylineProperties,
         BIMRailingProperties,
         BIMRoofProperties,
+        BIMSlabProperties,
         BIMStairProperties,
         BIMSverchokProperties,
         BIMWallProperties,
@@ -116,6 +120,18 @@ class Model(bonsai.core.tool.Model):
     def get_railing_props(cls, obj: bpy.types.Object) -> BIMRailingProperties:
         return obj.BIMRailingProperties  # pyright: ignore[reportAttributeAccessIssue]
 
+    @classmethod
+    def get_slab_props(cls, obj: bpy.types.Object) -> BIMSlabProperties:
+        return obj.BIMSlabProperties  # pyright: ignore[reportAttributeAccessIssue]
+
+    @classmethod
+    def get_pipe_segment_props(cls, obj: bpy.types.Object) -> BIMPipeSegmentProperties:
+        return obj.BIMPipeSegmentProperties  # pyright: ignore[reportAttributeAccessIssue]
+
+    @classmethod
+    def get_duct_segment_props(cls, obj: bpy.types.Object) -> BIMDuctSegmentProperties:
+        return obj.BIMDuctSegmentProperties  # pyright: ignore[reportAttributeAccessIssue]
+
     @classmethod
     def get_sverchok_props(cls, obj: bpy.types.Object) -> BIMSverchokProperties:
         return obj.BIMSverchokProperties  # pyright: ignore[reportAttributeAccessIssue]
@@ -362,6 +378,28 @@ class Model(bonsai.core.tool.Model):
             else:
                 break
 
+    @classmethod
+    def get_sibling_occurrence_count(cls, element: ifcopenshell.entity_instance) -> int:
+        """Number of *other* products sharing this element's body representation.
+
+        Returns the count of products bound to the same resolved body rep, minus
+        ``element`` itself and minus its type (if any). Zero when the element has
+        no body rep, no resolved rep, or no siblings. A non-zero result means a
+        parametric edit on ``element`` will silently mutate other instances'
+        geometry."""
+        body_rep = tool.Geometry.get_body_representation(element)
+        if not body_rep:
+            return 0
+        resolved = ifcopenshell.util.representation.resolve_representation(body_rep)
+        if not resolved:
+            return 0
+        elements = tool.Geometry.get_elements_by_representation(resolved)
+        elements.discard(element)
+        element_type = ifcopenshell.util.element.get_type(element)
+        if element_type is not None:
+            elements.discard(element_type)
+        return len(elements)
+
     unit_scale: float
     vertices: list[Vector]
     edges: list[Sequence[int]]
@@ -777,7 +815,7 @@ class Model(bonsai.core.tool.Model):
         unit_scale = ifcopenshell.util.unit.calculate_unit_scale(tool.Ifc.get())
         layer_params = tool.Model.get_material_layer_parameters(element)
         layer_offset = layer_params["offset"]
-        thickness = layer_params["thickness"] / unit_scale
+        thickness = layer_params["thickness"]
         props = tool.Material.get_object_material_props(obj)
 
         # Try to load from pset if not already in props
@@ -785,7 +823,7 @@ class Model(bonsai.core.tool.Model):
             pset = ifcopenshell.util.element.get_pset(element, "BBIM_MaterialLayer")
             if pset and pset.get("UseCustomOffset", False):
                 # Load from pset
-                custom_offset = pset.get("CustomOffset", 0.0)
+                custom_offset = pset.get("CustomOffset", 0.0) * unit_scale
                 usage_type = tool.Model.get_usage_type(element)
 
                 if usage_type == "LAYER2":
@@ -798,7 +836,7 @@ class Model(bonsai.core.tool.Model):
                 return None
         else:
             # Use current props
-            custom_offset = props.custom_offset / unit_scale
+            custom_offset = props.custom_offset
             if tool.Model.get_usage_type(element) == "LAYER2":
                 custom_offset_reference = props.custom_wall_reference
             elif tool.Model.get_usage_type(element) == "LAYER3":
@@ -809,17 +847,17 @@ class Model(bonsai.core.tool.Model):
         direction_sense = layer_params["direction_sense"]
 
         if direction_sense == "POSITIVE" and custom_offset_reference in {"INTERIOR", "TOP"}:
-            layer_offset = custom_offset - thickness * unit_scale
+            layer_offset = custom_offset - thickness
         if direction_sense == "POSITIVE" and custom_offset_reference in {"CENTER", "MIDDLE"}:
-            layer_offset = custom_offset - (thickness / 2) * unit_scale
+            layer_offset = custom_offset - (thickness / 2)
         if (direction_sense == "POSITIVE" and custom_offset_reference in {"EXTERIOR", "BOTTOM"}) or (
             direction_sense == "NEGATIVE" and custom_offset_reference in {"EXTERIOR", "TOP"}
         ):
             layer_offset = custom_offset
         if direction_sense == "NEGATIVE" and custom_offset_reference in {"CENTER", "MIDDLE"}:
-            layer_offset = custom_offset + (thickness / 2) * unit_scale
+            layer_offset = custom_offset + (thickness / 2)
         if direction_sense == "NEGATIVE" and custom_offset_reference in {"INTERIOR", "BOTTOM"}:
-            layer_offset = custom_offset + thickness * unit_scale
+            layer_offset = custom_offset + thickness
 
         return layer_offset / unit_scale
 
@@ -872,6 +910,46 @@ class Model(bonsai.core.tool.Model):
         """Return True if element has an IfcRelConnectsElements(TOP) relationship."""
         return any(rel.is_a("IfcRelConnectsElements") and rel.Description == "TOP" for rel in element.ConnectedFrom)
 
+    @classmethod
+    def strip_underside_booleans(cls, wall: ifcopenshell.entity_instance) -> bool:
+        """Remove slab-trim ``IfcBooleanResult`` items from a wall's body chain.
+
+        Returns ``True`` if any boolean was removed, so the caller knows whether
+        a Blender-side body reload is needed to surface the geometry change.
+
+        Hook for the duplicate path (Shift+D): the source wall's clip booleans
+        don't make sense on a copy pulled away from the slab. Booleans whose
+        ``SecondOperand.is_a("IfcTessellatedFaceSet")`` are removed — same
+        imprecise discriminator the rest of the wall-to-underside machinery
+        uses (manual cuts authored from tessellated meshes would also be
+        stripped, but most manual cuts use ``IfcExtrudedAreaSolid`` / CSG
+        primitives and are unaffected).
+
+        Cannot reuse ``remove_wall_to_underside_booleans`` here because the
+        duplicate's ``BBIM_Boolean.Data`` holds the source wall's stale ids —
+        ``get_manual_booleans`` returns empty on the copy and the helper
+        early-returns. The duplicate hook works directly off the chain.
+        """
+        representation = tool.Geometry.get_body_representation(wall)
+        if not representation:
+            return False
+        chain = cls.get_booleans(wall, representation)
+        to_remove = [b for b in chain if (sec := b.SecondOperand) is not None and sec.is_a("IfcTessellatedFaceSet")]
+        for b in to_remove:
+            tool.Geometry.remove_representation_item(b.SecondOperand, wall)
+        # Sweep the now-stale BBIM_Boolean entries on the copy (their ids point
+        # at booleans that were never in this wall's chain — they survived the
+        # ifcopenshell deep copy as JSON text in the pset payload).
+        pset_data = ifcopenshell.util.element.get_pset(wall, "BBIM_Boolean")
+        if pset_data:
+            representation = tool.Geometry.get_body_representation(wall)
+            chain_ids = {b.id() for b in cls.get_booleans(wall, representation)} if representation else set()
+            stored_ids = set(json.loads(pset_data["Data"]))
+            stale_ids = stored_ids - chain_ids
+            if stale_ids:
+                cls.unmark_manual_booleans(wall, list(stale_ids))
+        return bool(to_remove)
+
     @classmethod
     def remove_wall_to_underside_booleans(cls, wall: ifcopenshell.entity_instance) -> None:
         """Remove all IfcBooleanResult items previously added by extend_walls_to_underside."""
@@ -1167,6 +1245,42 @@ class Model(bonsai.core.tool.Model):
         cls, parent_obj: bpy.types.Object, data: list[dict[str, Any]], array_layers_to_apply: Iterable[int] = tuple()
     ) -> None:
         """`array_layers_to_apply` - list of array layer indices to apply"""
+        with tool.Geometry.batch_host_recut():
+            cls._regenerate_array_body(parent_obj, data, array_layers_to_apply)
+
+    @classmethod
+    def _prune_orphan_array_children(cls, array: dict[str, Any]) -> None:
+        """Drop GUIDs from ``array['children']`` whose IFC entity or Blender
+        object is no longer alive, and cascade-remove the orphan IFC entity
+        if it still exists. Outliner / keyboard delete of a Bonsai-managed
+        object bypasses ``bim.delete``'s cascade, leaving dangling opening
+        and filling references that later confuse regen and crash the
+        ``batch_host_recut`` drain."""
+        live_guids: list[str] = []
+        ifc_file = tool.Ifc.get()
+        for guid in array["children"]:
+            try:
+                element = ifc_file.by_guid(guid)
+            except RuntimeError:
+                continue
+            obj = tool.Ifc.get_object(element)
+            try:
+                is_live = obj is not None and obj.data is not None
+            except ReferenceError:
+                is_live = False
+            if is_live:
+                live_guids.append(guid)
+                continue
+            try:
+                ifcopenshell.api.root.remove_product(ifc_file, product=element)
+            except (RuntimeError, ifcopenshell.Error):
+                pass
+        array["children"] = live_guids
+
+    @classmethod
+    def _regenerate_array_body(
+        cls, parent_obj: bpy.types.Object, data: list[dict[str, Any]], array_layers_to_apply: Iterable[int]
+    ) -> None:
         parent_element = tool.Ifc.get_entity(parent_obj)
 
         if pset := ifcopenshell.util.element.get_pset(parent_element, "BBIM_Array"):
@@ -1178,6 +1292,7 @@ class Model(bonsai.core.tool.Model):
         obj_stack = [parent_obj]
 
         for array_i, array in enumerate(data):
+            cls._prune_orphan_array_children(array)
             child_i = 0
             existing_children = set(array["children"])
             total_existing_children = len(array["children"])
@@ -1191,6 +1306,14 @@ class Model(bonsai.core.tool.Model):
             else:
                 base_offset = Vector([array["x"], array["y"], array["z"]]) * unit_scale
 
+            target_new_in_this_layer = (array["count"] - 1) * len(obj_stack)
+            missing_count = max(0, target_new_in_this_layer - total_existing_children)
+            new_entities_pool: list[ifcopenshell.entity_instance] = []
+            if missing_count > 0:
+                batch_old_to_new = tool.Geometry.duplicate_ifc_object_n_times(parent_obj, missing_count)
+                new_entities_pool = batch_old_to_new.get(parent_element, [])
+            new_entities_iter = iter(new_entities_pool)
+
             for i in range(array["count"]):
                 if i == 0:
                     continue
@@ -1208,8 +1331,13 @@ class Model(bonsai.core.tool.Model):
                         child_obj = tool.Ifc.get_object(child_element)
                         assert child_obj
                     except (IndexError, RuntimeError, AssertionError):
-                        old_to_new, _ = tool.Geometry.duplicate_ifc_objects([parent_obj])
-                        child_element = next(iter(old_to_new.values()))[0]
+                        try:
+                            child_element = next(new_entities_iter)
+                        except StopIteration:
+                            # Stale-GUID mid-list left the pool exhausted; fall back
+                            # to a one-off duplicate so the layer can still complete.
+                            old_to_new, _ = tool.Geometry.duplicate_ifc_objects([parent_obj])
+                            child_element = next(iter(old_to_new.values()))[0]
                         child_obj = tool.Ifc.get_object(child_element)
 
                     # add child pset
@@ -1243,7 +1371,10 @@ class Model(bonsai.core.tool.Model):
             # handle elements unused in the array after regeneration
             removed_children = set(existing_children) - set(array["children"])
             for removed_child in removed_children:
-                element = tool.Ifc.get().by_guid(removed_child)
+                try:
+                    element = tool.Ifc.get().by_guid(removed_child)
+                except RuntimeError:
+                    continue
                 # Strip any wall/slab opening cut by this child before deletion,
                 # so the host's HasOpenings shrinks symmetrically with count.
                 if getattr(element, "FillsVoids", None):
@@ -1274,14 +1405,7 @@ class Model(bonsai.core.tool.Model):
             tool.Ifc.get(), pset=pset, properties={"Data": json_data, "Parent": parent_element.GlobalId}
         )
 
-        # Post-condition: parent is selected on return. duplicate_ifc_objects
-        # deselects the source on every call inside the regen loop; without
-        # this restore, callers get a deselected parent for arrays with N >= 2.
-        # TODO: batch the per-child duplicate_ifc_objects([parent]) calls into
-        # a single N-way duplicate — N depsgraph churns + N select/deselect
-        # flips is wasteful, and a batched duplicate would also remove the
-        # need for this restore.
-        parent_obj.select_set(True)
+        tool.Blender.set_object_selection(parent_obj, True)
 
     @classmethod
     def mirror_parent_void_fillings_to_children(
@@ -1362,9 +1486,7 @@ class Model(bonsai.core.tool.Model):
             representation = tool.Geometry.get_representation_by_context(voided_element, context)
             if representation is None:
                 continue
-            bonsai.core.geometry.switch_representation(
-                tool.Ifc, tool.Geometry, obj=voided_obj, representation=representation
-            )
+            tool.Geometry.recut_host(voided_obj, representation)
 
     @classmethod
     def unshare_opening_representation(cls, filling: ifcopenshell.entity_instance) -> None:
@@ -1556,8 +1678,7 @@ class Model(bonsai.core.tool.Model):
         element = tool.Ifc.get_entity(object)
         if not element:
             return
-        psets = ifcopenshell.util.element.get_psets(element)
-        pset_data = psets.get(pset_name, None)
+        pset_data = ifcopenshell.util.element.get_pset(element, pset_name)
         if not pset_data:
             return
         pset_data["data_dict"] = json.loads(pset_data.get("Data", "[]") or "[]")
@@ -1976,47 +2097,86 @@ class Model(bonsai.core.tool.Model):
         return (vertices, edges, faces)
 
     @classmethod
-    def update_simple_openings(cls, element: ifcopenshell.entity_instance) -> None:
+    def regenerate_filling_opening_body(cls, filling: ifcopenshell.entity_instance) -> Optional[bpy.types.Object]:
+        """Regenerate only the mapped source used by ``filling``'s opening so
+        it matches ``filling``'s current parametric dimensions.
+
+        Returns the voided host Blender object so the caller can recut it,
+        or ``None`` if ``filling`` has no opening to refresh or the host is
+        an aggregate (no mesh data to recut against)."""
         from bonsai.bim.module.model.opening import FilledOpeningGenerator
 
-        ifc_file = tool.Ifc.get()
-        fillings = {e: tool.Ifc.get_object(e) for e in tool.Array.get_parametric_propagation_targets(element)}
+        if not filling.FillsVoids:
+            return None
 
-        voided_objs = set()
-        has_replaced_opening_representation = False
+        ifc_file = tool.Ifc.get()
+        opening = filling.FillsVoids[0].RelatingOpeningElement
+        voided_obj = tool.Ifc.get_object(opening.VoidsElements[0].RelatingBuildingElement)
+        if voided_obj is None or voided_obj.data is None:
+            return None
+
+        old_representation = tool.Geometry.get_body_representation(opening)
+        if old_representation is None:
+            return voided_obj
+        old_representation = tool.Geometry.resolve_mapped_representation(old_representation)
+
+        ifcopenshell.api.geometry.unassign_representation(ifc_file, product=opening, representation=old_representation)
+
+        filling_obj = tool.Ifc.get_object(filling)
+        new_representation = FilledOpeningGenerator().generate_opening_from_filling(
+            filling, filling_obj, voided_obj.dimensions[1]
+        )
+
+        for inverse in ifc_file.get_inverse(old_representation):
+            ifcopenshell.util.element.replace_attribute(inverse, old_representation, new_representation)
+
+        ifcopenshell.api.geometry.remove_representation(ifc_file, representation=old_representation)
+
+        return voided_obj
+
+    @classmethod
+    def regenerate_simple_opening_bodies(cls, element: ifcopenshell.entity_instance) -> set:
+        """Regenerate every distinct mapped opening source within ``element``'s
+        type-occurrence family so each one matches the family's current
+        parametric dimensions.
+
+        Most occurrences share a single mapped source — refreshing it once
+        propagates to every filling via inverse-substitution. Some families,
+        especially those imported from foreign authoring tools, fragment into
+        several mapped sources for the same type; dedup is by source id so
+        every distinct source gets one refresh. Returns the set of Blender
+        objects whose host representation needs a viewport-level recut
+        (callers handle the recut themselves)."""
+        ifc_file = tool.Ifc.get()
+        fillings = list(tool.Array.get_parametric_propagation_targets(element))
+
+        voided_objs: set = set()
+        seen_source_ids: set[int] = set()
         for filling in fillings:
             if not filling.FillsVoids:
                 continue
 
             opening = filling.FillsVoids[0].RelatingOpeningElement
             voided_obj = tool.Ifc.get_object(opening.VoidsElements[0].RelatingBuildingElement)
-            voided_objs.add(voided_obj)
+            if voided_obj is not None:
+                voided_objs.add(voided_obj)
 
-            # We assume all occurrences of the same element type (e.g. a window)
-            # will use openings of the same thickness.
-            # Generator we use by default will create a really thick opening representation
-            # to make sure it will fit for walls with different thickness.
-            if has_replaced_opening_representation:
+            body = tool.Geometry.get_body_representation(opening)
+            if body is None:
                 continue
+            source = tool.Geometry.resolve_mapped_representation(body)
+            if source.id() in seen_source_ids:
+                continue
+            seen_source_ids.add(source.id())
 
-            old_representation = ifcopenshell.util.representation.get_representation(
-                opening, "Model", "Body", "MODEL_VIEW"
-            )
-            old_representation = tool.Geometry.resolve_mapped_representation(old_representation)
-            ifcopenshell.api.geometry.unassign_representation(
-                ifc_file, product=opening, representation=old_representation
-            )
+            cls.regenerate_filling_opening_body(filling)
 
-            new_representation = FilledOpeningGenerator().generate_opening_from_filling(
-                filling, fillings[filling], voided_obj.dimensions[1]
-            )
+        return voided_objs
 
-            for inverse in ifc_file.get_inverse(old_representation):
-                ifcopenshell.util.element.replace_attribute(inverse, old_representation, new_representation)
-
-            ifcopenshell.api.geometry.remove_representation(ifc_file, representation=old_representation)
-
-            has_replaced_opening_representation = True
+    @classmethod
+    def update_simple_openings(cls, element: ifcopenshell.entity_instance) -> None:
+        voided_objs = cls.regenerate_simple_opening_bodies(element)
+        fillings = {e: tool.Ifc.get_object(e) for e in tool.Array.get_parametric_propagation_targets(element)}
 
         tool.Model.reload_body_representation(voided_objs)
         if fillings:
@@ -2943,7 +3103,7 @@ class Model(bonsai.core.tool.Model):
     def offset_wall(cls, wall: bpy.types.Object, baseline: Literal["EXTERIOR", "INTERIOR", "CENTER"]) -> None:
         element = tool.Ifc.get_entity(wall)
         usage = ifcopenshell.util.element.get_material(element)
-        if not usage.is_a("IfcMaterialLayerSetUsage"):
+        if usage is None or not usage.is_a("IfcMaterialLayerSetUsage"):
             return
         layer_set = usage.ForLayerSet
         if baseline == "CENTER":
@@ -2979,6 +3139,9 @@ class Model(bonsai.core.tool.Model):
             regenerate_fillet_corner_wall(element, obj)
             return
         rep = ifcopenshell.api.geometry.regenerate_wall_representation(tool.Ifc.get(), element)
+        if rep is None:
+            # Wall has no IfcMaterialLayerSet — layer-set rebuild not applicable.
+            return
         bonsai.core.geometry.switch_representation(
             tool.Ifc,
             tool.Geometry,
@@ -2993,6 +3156,19 @@ class Model(bonsai.core.tool.Model):
         obj.matrix_world = tool.Loader.apply_blender_offset_to_matrix_world(obj, matrix)
         tool.Geometry.record_object_position(obj)
 
+    @classmethod
+    def regenerate_wall(cls, obj: bpy.types.Object) -> None:
+        """Rebuild a wall's body from current IFC state: extrusion + openings
+        first, then re-clip to any surviving ``IfcRelConnectsElements(TOP)``
+        slab. Safe on walls with no openings and no slab connection — both
+        steps no-op against their preconditions."""
+        element = tool.Ifc.get_entity(obj)
+        if element is None:
+            return
+        cls.recreate_wall(element, obj)
+        if cls.has_underside_connection(element):
+            bonsai.core.model.regenerate_wall_to_underside(tool.Ifc, tool.Geometry, cls, [obj])
+
     @classmethod
     def recalculate_walls(cls, walls: list[bpy.types.Object]) -> None:
         queue: set[tuple[ifcopenshell.entity_instance, bpy.types.Object]] = set()
@@ -3008,6 +3184,26 @@ class Model(bonsai.core.tool.Model):
                 obj = tool.Ifc.get_object(rel.RelatingElement)
                 tool.Geometry.commit_placement_if_moved(obj)
                 queue.add((rel.RelatingElement, obj))
+
+        # Sync filling and opening placements so subsequent wall recuts
+        # operate on the up-to-date opening positions — a filling moved
+        # along the wall's reference line otherwise stays cut at its old
+        # spot.
+        for element, wall in queue:
+            if not wall:
+                continue
+            for rel in getattr(element, "HasOpenings", []) or []:
+                opening = rel.RelatedOpeningElement
+                for fill_rel in getattr(opening, "HasFillings", []) or []:
+                    filling = fill_rel.RelatedBuildingElement
+                    filling_obj = tool.Ifc.get_object(filling)
+                    if filling_obj is None or not tool.Ifc.is_moved(filling_obj):
+                        continue
+                    bonsai.core.geometry.edit_object_placement(tool.Ifc, tool.Geometry, tool.Surveyor, obj=filling_obj)
+                    ifcopenshell.api.geometry.edit_object_placement(
+                        tool.Ifc.get(), product=opening, matrix=filling_obj.matrix_world
+                    )
+
         for element, wall in queue:
             if not wall:
                 continue